From: Christian Lamparter Date: Tue, 23 Jun 2009 15:38:49 +0000 (-0500) Subject: p54: Move mac80211 glue code X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0ac0d6cedf6110381501c236339a9fbe13c3441d;p=openwrt%2Fstaging%2Fblogic.git p54: Move mac80211 glue code Copy the mac80211 glue code from p54common.c into a new file main.c Signed-off-by: Christian Lamparter Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c new file mode 100644 index 000000000000..f9b4f6a238ea --- /dev/null +++ b/drivers/net/wireless/p54/main.c @@ -0,0 +1,607 @@ +/* + * mac80211 glue code for mac80211 Prism54 drivers + * + * Copyright (c) 2006, Michael Wu + * Copyright (c) 2007-2009, Christian Lamparter + * Copyright 2008, Johannes Berg + * + * Based on: + * - the islsm (softmac prism54) driver, which is: + * Copyright 2004-2006 Jean-Baptiste Note , et al. + * - stlc45xx driver + * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include + +#include "p54.h" +#include "lmac.h" + +static int modparam_nohwcrypt; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); +MODULE_AUTHOR("Michael Wu "); +MODULE_DESCRIPTION("Softmac Prism54 common code"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("prism54common"); + +static void p54_sta_notify(struct ieee80211_hw *dev, struct ieee80211_vif *vif, + enum sta_notify_cmd notify_cmd, + struct ieee80211_sta *sta) +{ + struct p54_common *priv = dev->priv; + switch (notify_cmd) { + case STA_NOTIFY_ADD: + case STA_NOTIFY_REMOVE: + /* + * Notify the firmware that we don't want or we don't + * need to buffer frames for this station anymore. + */ + + p54_sta_unlock(priv, sta->addr); + break; + case STA_NOTIFY_AWAKE: + /* update the firmware's filter table */ + p54_sta_unlock(priv, sta->addr); + break; + default: + break; + } +} + +static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta, + bool set) +{ + struct p54_common *priv = dev->priv; + + return p54_update_beacon_tim(priv, sta->aid, set); +} + +static int p54_beacon_format_ie_tim(struct sk_buff *skb) +{ + /* + * the good excuse for this mess is ... the firmware. + * The dummy TIM MUST be at the end of the beacon frame, + * because it'll be overwritten! + */ + + struct ieee80211_mgmt *mgmt = (void *)skb->data; + u8 *pos, *end; + + if (skb->len <= sizeof(mgmt)) + return -EINVAL; + + pos = (u8 *)mgmt->u.beacon.variable; + end = skb->data + skb->len; + while (pos < end) { + if (pos + 2 + pos[1] > end) + return -EINVAL; + + if (pos[0] == WLAN_EID_TIM) { + u8 dtim_len = pos[1]; + u8 dtim_period = pos[3]; + u8 *next = pos + 2 + dtim_len; + + if (dtim_len < 3) + return -EINVAL; + + memmove(pos, next, end - next); + + if (dtim_len > 3) + skb_trim(skb, skb->len - (dtim_len - 3)); + + pos = end - (dtim_len + 2); + + /* add the dummy at the end */ + pos[0] = WLAN_EID_TIM; + pos[1] = 3; + pos[2] = 0; + pos[3] = dtim_period; + pos[4] = 0; + return 0; + } + pos += 2 + pos[1]; + } + return 0; +} + +static int p54_beacon_update(struct p54_common *priv, + struct ieee80211_vif *vif) +{ + struct sk_buff *beacon; + __le32 old_beacon_req_id; + int ret; + + beacon = ieee80211_beacon_get(priv->hw, vif); + if (!beacon) + return -ENOMEM; + ret = p54_beacon_format_ie_tim(beacon); + if (ret) + return ret; + + old_beacon_req_id = priv->beacon_req_id; + priv->beacon_req_id = GET_REQ_ID(beacon); + + ret = p54_tx_80211(priv->hw, beacon); + if (ret) { + priv->beacon_req_id = old_beacon_req_id; + return -ENOSPC; + } + + priv->tsf_high32 = 0; + priv->tsf_low32 = 0; + + return 0; +} + +static int p54_start(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + int err; + + mutex_lock(&priv->conf_mutex); + err = priv->open(dev); + if (err) + goto out; + P54_SET_QUEUE(priv->qos_params[0], 0x0002, 0x0003, 0x0007, 47); + P54_SET_QUEUE(priv->qos_params[1], 0x0002, 0x0007, 0x000f, 94); + P54_SET_QUEUE(priv->qos_params[2], 0x0003, 0x000f, 0x03ff, 0); + P54_SET_QUEUE(priv->qos_params[3], 0x0007, 0x000f, 0x03ff, 0); + err = p54_set_edcf(priv); + if (err) + goto out; + + memset(priv->bssid, ~0, ETH_ALEN); + priv->mode = NL80211_IFTYPE_MONITOR; + err = p54_setup_mac(priv); + if (err) { + priv->mode = NL80211_IFTYPE_UNSPECIFIED; + goto out; + } + + queue_delayed_work(dev->workqueue, &priv->work, 0); + + priv->softled_state = 0; + err = p54_set_leds(priv); + +out: + mutex_unlock(&priv->conf_mutex); + return err; +} + +static void p54_stop(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + int i; + + mutex_lock(&priv->conf_mutex); + priv->mode = NL80211_IFTYPE_UNSPECIFIED; + priv->softled_state = 0; + p54_set_leds(priv); + + cancel_delayed_work_sync(&priv->work); + + priv->stop(dev); + skb_queue_purge(&priv->tx_pending); + skb_queue_purge(&priv->tx_queue); + for (i = 0; i < P54_QUEUE_NUM; i++) { + priv->tx_stats[i].count = 0; + priv->tx_stats[i].len = 0; + } + + priv->beacon_req_id = cpu_to_le32(0); + priv->tsf_high32 = priv->tsf_low32 = 0; + mutex_unlock(&priv->conf_mutex); +} + +static int p54_add_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct p54_common *priv = dev->priv; + + mutex_lock(&priv->conf_mutex); + if (priv->mode != NL80211_IFTYPE_MONITOR) { + mutex_unlock(&priv->conf_mutex); + return -EOPNOTSUPP; + } + + priv->vif = conf->vif; + + switch (conf->type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: + priv->mode = conf->type; + break; + default: + mutex_unlock(&priv->conf_mutex); + return -EOPNOTSUPP; + } + + memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); + p54_setup_mac(priv); + mutex_unlock(&priv->conf_mutex); + return 0; +} + +static void p54_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + struct p54_common *priv = dev->priv; + + mutex_lock(&priv->conf_mutex); + priv->vif = NULL; + if (priv->beacon_req_id) { + p54_tx_cancel(priv, priv->beacon_req_id); + priv->beacon_req_id = cpu_to_le32(0); + } + priv->mode = NL80211_IFTYPE_MONITOR; + memset(priv->mac_addr, 0, ETH_ALEN); + memset(priv->bssid, 0, ETH_ALEN); + p54_setup_mac(priv); + mutex_unlock(&priv->conf_mutex); +} + +static int p54_config(struct ieee80211_hw *dev, u32 changed) +{ + int ret = 0; + struct p54_common *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; + + mutex_lock(&priv->conf_mutex); + if (changed & IEEE80211_CONF_CHANGE_POWER) + priv->output_power = conf->power_level << 2; + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + ret = p54_scan(priv, P54_SCAN_EXIT, 0); + if (ret) + goto out; + } + if (changed & IEEE80211_CONF_CHANGE_PS) { + ret = p54_set_ps(priv); + if (ret) + goto out; + } + +out: + mutex_unlock(&priv->conf_mutex); + return ret; +} + +static void p54_configure_filter(struct ieee80211_hw *dev, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_mc_list *mclist) +{ + struct p54_common *priv = dev->priv; + + *total_flags &= FIF_PROMISC_IN_BSS | + FIF_OTHER_BSS; + + priv->filter_flags = *total_flags; + + if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) + p54_setup_mac(priv); +} + +static int p54_conf_tx(struct ieee80211_hw *dev, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct p54_common *priv = dev->priv; + int ret; + + mutex_lock(&priv->conf_mutex); + if ((params) && !(queue > 4)) { + P54_SET_QUEUE(priv->qos_params[queue], params->aifs, + params->cw_min, params->cw_max, params->txop); + ret = p54_set_edcf(priv); + } else + ret = -EINVAL; + mutex_unlock(&priv->conf_mutex); + return ret; +} + +static void p54_work(struct work_struct *work) +{ + struct p54_common *priv = container_of(work, struct p54_common, + work.work); + + if (unlikely(priv->mode == NL80211_IFTYPE_UNSPECIFIED)) + return ; + + /* + * TODO: walk through tx_queue and do the following tasks + * 1. initiate bursts. + * 2. cancel stuck frames / reset the device if necessary. + */ + + p54_fetch_statistics(priv); +} + +static int p54_get_stats(struct ieee80211_hw *dev, + struct ieee80211_low_level_stats *stats) +{ + struct p54_common *priv = dev->priv; + + memcpy(stats, &priv->stats, sizeof(*stats)); + return 0; +} + +static int p54_get_tx_stats(struct ieee80211_hw *dev, + struct ieee80211_tx_queue_stats *stats) +{ + struct p54_common *priv = dev->priv; + + memcpy(stats, &priv->tx_stats[P54_QUEUE_DATA], + sizeof(stats[0]) * dev->queues); + return 0; +} + +static void p54_bss_info_changed(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u32 changed) +{ + struct p54_common *priv = dev->priv; + + mutex_lock(&priv->conf_mutex); + if (changed & BSS_CHANGED_BSSID) { + memcpy(priv->bssid, info->bssid, ETH_ALEN); + p54_setup_mac(priv); + } + + if (changed & BSS_CHANGED_BEACON) { + p54_scan(priv, P54_SCAN_EXIT, 0); + p54_setup_mac(priv); + p54_beacon_update(priv, vif); + p54_set_edcf(priv); + } + + if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_BEACON)) { + priv->use_short_slot = info->use_short_slot; + p54_set_edcf(priv); + } + if (changed & BSS_CHANGED_BASIC_RATES) { + if (dev->conf.channel->band == IEEE80211_BAND_5GHZ) + priv->basic_rate_mask = (info->basic_rates << 4); + else + priv->basic_rate_mask = info->basic_rates; + p54_setup_mac(priv); + if (priv->fw_var >= 0x500) + p54_scan(priv, P54_SCAN_EXIT, 0); + } + if (changed & BSS_CHANGED_ASSOC) { + if (info->assoc) { + priv->aid = info->aid; + priv->wakeup_timer = info->beacon_int * + info->dtim_period * 5; + p54_setup_mac(priv); + } + } + + mutex_unlock(&priv->conf_mutex); +} + +static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct p54_common *priv = dev->priv; + int slot, ret = 0; + u8 algo = 0; + u8 *addr = NULL; + + if (modparam_nohwcrypt) + return -EOPNOTSUPP; + + mutex_lock(&priv->conf_mutex); + if (cmd == SET_KEY) { + switch (key->alg) { + case ALG_TKIP: + if (!(priv->privacy_caps & (BR_DESC_PRIV_CAP_MICHAEL | + BR_DESC_PRIV_CAP_TKIP))) { + ret = -EOPNOTSUPP; + goto out_unlock; + } + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + algo = P54_CRYPTO_TKIPMICHAEL; + break; + case ALG_WEP: + if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_WEP)) { + ret = -EOPNOTSUPP; + goto out_unlock; + } + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + algo = P54_CRYPTO_WEP; + break; + case ALG_CCMP: + if (!(priv->privacy_caps & BR_DESC_PRIV_CAP_AESCCMP)) { + ret = -EOPNOTSUPP; + goto out_unlock; + } + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + algo = P54_CRYPTO_AESCCMP; + break; + default: + ret = -EOPNOTSUPP; + goto out_unlock; + } + slot = bitmap_find_free_region(priv->used_rxkeys, + priv->rx_keycache_size, 0); + + if (slot < 0) { + /* + * The device supports the choosen algorithm, but the + * firmware does not provide enough key slots to store + * all of them. + * But encryption offload for outgoing frames is always + * possible, so we just pretend that the upload was + * successful and do the decryption in software. + */ + + /* mark the key as invalid. */ + key->hw_key_idx = 0xff; + goto out_unlock; + } + } else { + slot = key->hw_key_idx; + + if (slot == 0xff) { + /* This key was not uploaded into the rx key cache. */ + + goto out_unlock; + } + + bitmap_release_region(priv->used_rxkeys, slot, 0); + algo = 0; + } + + if (sta) + addr = sta->addr; + + ret = p54_upload_key(priv, algo, slot, key->keyidx, + key->keylen, addr, key->key); + if (ret) { + bitmap_release_region(priv->used_rxkeys, slot, 0); + ret = -EOPNOTSUPP; + goto out_unlock; + } + + key->hw_key_idx = slot; + +out_unlock: + mutex_unlock(&priv->conf_mutex); + return ret; +} + +static const struct ieee80211_ops p54_ops = { + .tx = p54_tx_80211, + .start = p54_start, + .stop = p54_stop, + .add_interface = p54_add_interface, + .remove_interface = p54_remove_interface, + .set_tim = p54_set_tim, + .sta_notify = p54_sta_notify, + .set_key = p54_set_key, + .config = p54_config, + .bss_info_changed = p54_bss_info_changed, + .configure_filter = p54_configure_filter, + .conf_tx = p54_conf_tx, + .get_stats = p54_get_stats, + .get_tx_stats = p54_get_tx_stats +}; + +struct ieee80211_hw *p54_init_common(size_t priv_data_len) +{ + struct ieee80211_hw *dev; + struct p54_common *priv; + + dev = ieee80211_alloc_hw(priv_data_len, &p54_ops); + if (!dev) + return NULL; + + priv = dev->priv; + priv->hw = dev; + priv->mode = NL80211_IFTYPE_UNSPECIFIED; + priv->basic_rate_mask = 0x15f; + spin_lock_init(&priv->tx_stats_lock); + skb_queue_head_init(&priv->tx_queue); + skb_queue_head_init(&priv->tx_pending); + dev->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_NOISE_DBM; + + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MESH_POINT); + + dev->channel_change_time = 1000; /* TODO: find actual value */ + priv->tx_stats[P54_QUEUE_BEACON].limit = 1; + priv->tx_stats[P54_QUEUE_FWSCAN].limit = 1; + priv->tx_stats[P54_QUEUE_MGMT].limit = 3; + priv->tx_stats[P54_QUEUE_CAB].limit = 3; + priv->tx_stats[P54_QUEUE_DATA].limit = 5; + dev->queues = 1; + priv->noise = -94; + /* + * We support at most 8 tries no matter which rate they're at, + * we cannot support max_rates * max_rate_tries as we set it + * here, but setting it correctly to 4/2 or so would limit us + * artificially if the RC algorithm wants just two rates, so + * let's say 4/7, we'll redistribute it at TX time, see the + * comments there. + */ + dev->max_rates = 4; + dev->max_rate_tries = 7; + dev->extra_tx_headroom = sizeof(struct p54_hdr) + 4 + + sizeof(struct p54_tx_data); + + mutex_init(&priv->conf_mutex); + mutex_init(&priv->eeprom_mutex); + init_completion(&priv->eeprom_comp); + INIT_DELAYED_WORK(&priv->work, p54_work); + + return dev; +} +EXPORT_SYMBOL_GPL(p54_init_common); + +int p54_register_common(struct ieee80211_hw *dev, struct device *pdev) +{ + struct p54_common *priv = dev->priv; + int err; + + err = ieee80211_register_hw(dev); + if (err) { + dev_err(pdev, "Cannot register device (%d).\n", err); + return err; + } + +#ifdef CONFIG_P54_LEDS + err = p54_init_leds(priv); + if (err) + return err; +#endif /* CONFIG_P54_LEDS */ + + dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy)); + return 0; +} +EXPORT_SYMBOL_GPL(p54_register_common); + +void p54_free_common(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + + kfree(priv->iq_autocal); + kfree(priv->output_limit); + kfree(priv->curve_data); + kfree(priv->used_rxkeys); + priv->iq_autocal = NULL; + priv->output_limit = NULL; + priv->curve_data = NULL; + priv->used_rxkeys = NULL; + ieee80211_free_hw(dev); +} +EXPORT_SYMBOL_GPL(p54_free_common); + +void p54_unregister_common(struct ieee80211_hw *dev) +{ + struct p54_common *priv = dev->priv; + +#ifdef CONFIG_P54_LEDS + p54_unregister_leds(priv); +#endif /* CONFIG_P54_LEDS */ + + ieee80211_unregister_hw(dev); + mutex_destroy(&priv->conf_mutex); + mutex_destroy(&priv->eeprom_mutex); +} +EXPORT_SYMBOL_GPL(p54_unregister_common);