From: Chanwoo Choi Date: Tue, 22 Jul 2014 02:04:00 +0000 (+0100) Subject: iio: devicetree: Add DT binding documentation for Exynos3250 ADC X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0af34eec8fcd40acaa070d85f26d5411ec245485;p=openwrt%2Fstaging%2Fblogic.git iio: devicetree: Add DT binding documentation for Exynos3250 ADC This patch add DT binding documentation for Exynos3250 ADC IP. Exynos3250 has special clock ('sclk_adc') for ADC which provide clock to internal ADC. Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Reviewed-by: Naveen Krishna Chatradhi Reviewed-by: Tomasz Figa Acked-by: Kukjin Kim Acked-by: Arnd Bergmann Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index 832fe8cc24d7..adc61b095bd1 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -14,14 +14,21 @@ Required properties: for exynos4412/5250 controllers. Must be "samsung,exynos-adc-v2" for future controllers. + Must be "samsung,exynos3250-adc" for + controllers compatible with ADC of Exynos3250. - reg: Contains ADC register address range (base address and length) and the address of the phy enable register. - interrupts: Contains the interrupt information for the timer. The format is being dependent on which interrupt controller the Samsung device uses. - #io-channel-cells = <1>; As ADC has multiple outputs -- clocks From common clock binding: handle to adc clock. -- clock-names From common clock binding: Shall be "adc". +- clocks From common clock bindings: handles to clocks specified + in "clock-names" property, in the same order. +- clock-names From common clock bindings: list of clock input names + used by ADC block: + - "adc" : ADC bus clock + - "sclk" : ADC special clock (only for Exynos3250 and + compatible ADC block) - vdd-supply VDD input supply. Note: child nodes can be added for auto probing from device tree. @@ -41,6 +48,20 @@ adc: adc@12D10000 { vdd-supply = <&buck5_reg>; }; +Example: adding device info in dtsi file for Exynos3250 with additional sclk + +adc: adc@126C0000 { + compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; + reg = <0x126C0000 0x100>, <0x10020718 0x4>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; +}; Example: Adding child nodes in dts file