From: Felix Fietkau Date: Fri, 11 Dec 2015 21:12:14 +0000 (+0000) Subject: ar71xx: reorganize target patches/files to make it possible to add boards without... X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0b6271faf475a74cdd5b9d0c19ebba5298b4de8c;p=openwrt%2Fstaging%2Fadrian.git ar71xx: reorganize target patches/files to make it possible to add boards without adding patch files Signed-off-by: Felix Fietkau SVN-Revision: 47874 --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt new file mode 100644 index 0000000000..43ffa70978 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -0,0 +1,1388 @@ +config ATH79_MACH_ALFA_AP96 + bool "ALFA Network AP96 board support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_HORNET_UB + bool "ALFA Network Hornet-UB board support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_ALFA_NX + bool "ALFA Network N2/N5 board support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_TUBE2H + bool "ALFA Network Tube2H board support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_ALL0258N + bool "Allnet ALL0258N support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_ALL0315N + bool "Allnet ALL0315N support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_ANTMINER_S1 + bool "Bitmain Antminer S1 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_ANTMINER_S3 + bool "Bitmain Antminer S3 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_ARDUINO_YUN + bool "Arduino Yun" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Arduino Yun. + +config ATH79_MACH_AP113 + bool "Atheros AP113 board support" + select SOC_AR724X + select ATH79_DEV_M25P80 + select ATH79_DEV_PB9X_PCI if PCI + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_USB + select ATH79_DEV_ETH + +config ATH79_MACH_AP132 + bool "Atheros AP132 reference board" + select SOC_QCA955X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Atheros AP132 reference boards. + +config ATH79_MACH_AP143 + bool "Atheros AP143 reference board" + select SOC_QCA953X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_DEV_ETH + select ATH79_DEV_M25P80 + help + Say 'Y' here if you want your kernel to support the + Atheros AP143 reference board. + +config ATH79_MACH_AP147 + bool "Atheros AP147 reference board" + select SOC_QCA953X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_DEV_AP9X_PCI if PCI + help + Say 'Y' here if you want your kernel to support the + QCA AP147 reference boards. + +config ATH79_MACH_AP152 + bool "Atheros AP152 reference board" + select SOC_QCA956X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_DEV_AP9X_PCI if PCI + help + Say 'Y' here if you want your kernel to support the + QCA AP152 reference boards. + + +config ATH79_MACH_AP83 + bool "Atheros AP83 board support" + select SOC_AR913X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_AP96 + bool "Atheros AP96 board support" + select SOC_AR71XX + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_PB42 + bool "Atheros PB42 board support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_M25P80 + +config ATH79_MACH_PB92 + bool "Atheros PB92 board support" + select SOC_AR724X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_PB9X_PCI if PCI + select ATH79_DEV_USB + +config ATH79_MACH_AW_NR580 + bool "AzureWave AW-NR580 board support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_F9K1115V2 + bool "Belkin AC1750DB board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_EPG5000 + bool "EnGenius EPG5000 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_ESR1750 + bool "EnGenius ESR1750 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_WHR_HP_G300N + bool "Buffalo WHR-HP-G300N board support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_WLAE_AG300N + bool "Buffalo WLAE-AG300N board support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_WLR8100 + bool "Sitecom WLR-8100 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_WZR_HP_AG300H + bool "Buffalo WZR-HP-AG300H board support" + select SOC_AR71XX + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_WZR_HP_G300NH + bool "Buffalo WZR-HP-G300NH board support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select RTL8366_SMI + +config ATH79_MACH_WZR_HP_G300NH2 + bool "Buffalo WZR-HP-G300NH2 board support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_WZR_HP_G450H + bool "Buffalo WZR-HP-G450H board support" + select SOC_AR724X + select ATH79_DEV_ETH + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_WZR_450HP2 + bool "Buffalo WZR-450HP2 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_WP543 + bool "Compex WP543/WPJ543 board support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select MYLOADER + +config ATH79_MACH_WPE72 + bool "Compex WPE72/WPE72NX board support" + select SOC_AR724X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select MYLOADER + +config ATH79_MACH_WPJ344 + bool "Compex WPJ344 board support" + select SOC_AS934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_WPJ531 + bool "Compex WPJ531 board support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_WPJ558 + bool "Compex WPJ558 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_DGL_5500_A1 + bool "D-Link DGL-5500 A1 support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_DEV_USB + +config ATH79_MACH_DHP_1565_A1 + bool "D-Link DHP-1565 rev. A1 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_DIR_505_A1 + bool "D-Link DIR-505-A1 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_DIR_600_A1 + bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_NVRAM + +config ATH79_MACH_DIR_615_C1 + bool "D-Link DIR-615 rev. C1 support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_DIR_615_I1 + bool "D-Link DIR-615 rev. I1 support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_DIR_825_B1 + bool "D-Link DIR-825 rev. B1 board support" + select SOC_AR71XX + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_DIR_825_C1 + bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_DLAN_HOTSPOT + bool "devolo dLAN Hotspot support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_DLAN_PRO_500_WP + bool "devolo dLAN pro 500 Wireless+ support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_DEV_USB + +config ATH79_MACH_DLAN_PRO_1200_AC + bool "devolo dLAN pro 1200+ WiFi ac support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_SPI + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_DEV_NFC + select ATH79_DEV_USB + +config ATH79_MACH_DR344 + bool "Wallys DR344 board support" + select SOC_AS934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_DRAGINO2 + bool "DRAGINO V2 support" + select SOC_AR933X + select ATH79_DEV_M25P80 + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_WMAC + select ATH79_DEV_ETH + select ATH79_DEV_USB + +config ATH79_MACH_ESR900 + bool "EnGenius ESR900 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_EW_DORIN + bool "embedded wireless Dorin Platform support" + select SOC_AR933X + select ATH79_DEV_M25P80 + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_WMAC + select ATH79_DEV_ETH + help + Say 'Y' here if you want your kernel to support the + Dorin Platform from www.80211.de . + +config ATH79_MACH_EL_M150 + bool "EasyLink EL-M150 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_EL_MINI + bool "EasyLink EL-MINI support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_GL_AR150 + bool "GL AR150 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_GL_AR300 + bool "GL_AR300 support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_GL_DOMINO + bool "DOMINO support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_GL_INET + bool "GL-INET support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_EAP300V2 + bool "EnGenius EAP300 v2 support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_GS_MINIBOX_V1 + bool "Gainstrong MiniBox V1.0 support" + select SOC_AR933X + select ARH79_DEV_ETH + select ARH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_GS_OOLITE + bool "GS Oolite V1 support" + select SOC_AR933X + select ARH79_DEV_ETH + select ARH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_HIWIFI_HC6361 + bool "HiWiFi HC6361 board support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_JA76PF + bool "jjPlus JA76PF board support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_JWAP003 + bool "jjPlus JWAP003 board support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_WRT160NL + bool "Linksys WRT160NL board support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_WRT400N + bool "Linksys WRT400N board support" + select SOC_AR71XX + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_R6100 + bool "NETGEAR R6100 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_MC_MAC1200R + bool "MERCURY MAC1200R board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_RB4XX + bool "MikroTik RouterBOARD 4xx series support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_USB + +config ATH79_MACH_RB750 + bool "MikroTik RouterBOARD 750 support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_USB + select ATH79_ROUTERBOOT + +config ATH79_MACH_RB91X + bool "MikroTik RouterBOARD 91X support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_SPI + select ATH79_DEV_WMAC + select ATH79_DEV_USB + select ATH79_ROUTERBOOT + +config ATH79_MACH_RB922 + bool "MikroTik RouterBOARD 922 support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_M25P80 + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_ROUTERBOOT + select RLE_DECOMPRESS + +config ATH79_MACH_RB95X + bool "MikroTik RouterBOARD 95X support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_NFC + select ATH79_DEV_WMAC + select ATH79_DEV_USB + select ATH79_ROUTERBOOT + +config ATH79_MACH_RB2011 + bool "MikroTik RouterBOARD 2011 support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_M25P80 + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select ATH79_ROUTERBOOT + +config ATH79_MACH_RBSXTLITE + bool "MikroTik RouterBOARD SXT Lite" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_NFC + select ATH79_DEV_WMAC + select ATH79_ROUTERBOOT + +config ATH79_MACH_SMART_300 + bool "NC-LINK SMART-300 board support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_WNDAP360 + bool "NETGEAR WNDAP360 board support" + select SOC_AR71XX + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_WNDR3700 + bool "NETGEAR WNDR3700 board support" + select SOC_AR71XX + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_WNDR4300 + bool "NETGEAR WNDR3700v4/WNDR4300 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_WNR2000 + bool "NETGEAR WNR2000 board support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_WNR2000_V3 + bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + + config ATH79_MACH_WNR2200 + bool "NETGEAR WNR2200 board support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_WNR2000_V4 + bool "NETGEAR WNR2000 V4" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_OM2P + bool "OpenMesh OM2P board support" + select SOC_AR724X + select SOC_AR933X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_OM5P + bool "OpenMesh OM5P board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_ONION_OMEGA + bool "ONION OMEGA support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_MR12 + bool "Meraki MR12 board support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_MR16 + bool "Meraki MR16 board support" + select SOC_AR71XX + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_MR600 + bool "OpenMesh MR600 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_MZK_W04NU + bool "Planex MZK-W04NU board support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_MZK_W300NH + bool "Planex MZK-W300NH board support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_RW2458N + bool "Redwave RW2458N board support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_CAP4200AG + bool "Senao CAP4200AG support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_MR1750 + bool "OpenMesh MR1750 board support" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_MR900 + bool "OpenMesh MR900 board support" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_EAP7660D + bool "Senao EAP7660D support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_BSB + bool "Smart Electronics Black Swift board" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_ARCHER_C7 + bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_CPE510 + bool "TP-LINK CPE510 support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_MR11U + bool "TP-LINK TL-MR11U/TL-MR3040 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_MR13U + bool "TP-LINK TL-MR13U support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_MR3020 + bool "TP-LINK TL-MR3020 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_MR3X20 + bool "TP-LINK TL-MR3220/3420 support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_TL_WAX50RE + bool "TP-LINK TL-WA750/850RE support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WA701ND_V2 + bool "TP-LINK TL-WA701ND v2 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WA7210N_V2 + bool "TP-LINK TL-WA7210N v2 support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WA830RE_V2 + bool "TP-LINK TL-WA830RE v2 support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WA901ND + bool "TP-LINK TL-WA901ND/TL-WA7510N support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_TL_WA901ND_V2 + bool "TP-LINK TL-WA901ND v2 support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WDR3320_V2 + bool "TP-LINK TL-WDR3320 v2 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WDR3500 + bool "TP-LINK TL-WDR3500 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WDR4300 + bool "TP-LINK TL-WDR3600/4300/4310 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WDR6500_V2 + bool "TP-LINK TL-WDR6500 v2 board support" + select SOC_QCA956X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR703N + bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR720N_V3 + bool "TP-LINK TL-WR720N v3/v4 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR741ND + bool "TP-LINK TL-WR741ND support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_TL_WR741ND_V4 + bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR841N_V1 + bool "TP-LINK TL-WR841N v1 support" + select SOC_AR71XX + select ATH79_DEV_DSA + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_TL_WR841N_V8 + bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR841N_V9 + bool "TP-LINK TL-WR841N/ND v9 support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR941ND + bool "TP-LINK TL-WR941ND support" + select SOC_AR913X + select ATH79_DEV_DSA + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR941ND_V6 + bool "TP-LINK TL-WR941ND v6 support" + select SOC_QCA956X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR1041N_V2 + bool "TP-LINK TL-WR1041N v2 support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR1043ND + bool "TP-LINK TL-WR1043ND support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR1043ND_V2 + bool "TP-LINK TL-WR1043ND v2 support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_TL_WR2543N + bool "TP-LINK TL-WR2543N/ND support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_TEW_632BRP + bool "TRENDnet TEW-632BRP support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_TEW_673GRU + bool "TRENDnet TEW-673GRU support" + select SOC_AR71XX + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_NVRAM + +config ATH79_MACH_TEW_712BR + bool "TRENDnet TEW-712BR support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_TEW_732BR + bool "TRENDnet TEW-732BR support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_UBNT + bool "Ubiquiti AR71xx based boards support" + select SOC_AR71XX + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + +config ATH79_MACH_WEIO + bool "WeIO board" + select SOC_AR933X + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_MYNET_N600 + bool "WD My Net N600 board support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_MYNET_N750 + bool "WD My Net N750 board support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_MYNET_REXT + bool "WD My Net Wi-Fi Range Extender board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_NVRAM + +config ATH79_MACH_ZCN_1523H + bool "Zcomax ZCN-1523H support" + select SOC_AR724X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + +config ATH79_MACH_NBG460N + bool "Zyxel NBG460N/550N/550NH board support" + select SOC_AR913X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + +config ATH79_MACH_NBG6716 + bool "Zyxel NBG6616/NBG6716 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_CARAMBOLA2 + bool "8devices Carambola2 board" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_CF_E316N_V2 + bool "COMFAST CF-E316N v2 board" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_BHU_BXU2000N2_A + bool "BHU BXU2000n-2 rev. A support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + +config ATH79_MACH_QIHOO_C301 + bool "Qihoo 360 C301 board support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + select ATH79_DEV_USB + select ATH79_NVRAM diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile new file mode 100644 index 0000000000..b001876b34 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -0,0 +1,186 @@ +# +# Makefile for the Atheros AR71XX/AR724X/AR913X specific parts of the kernel +# +# Copyright (C) 2008-2011 Gabor Juhos +# Copyright (C) 2008 Imre Kaloz +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := prom.o setup.o irq.o common.o clock.o gpio.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_PCI) += pci.o + +# +# Devices +# +obj-y += dev-common.o +obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o +obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o +obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o +obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o +obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o +obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o +obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o +obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o +obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o +obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o + +# +# Miscellaneous objects +# +obj-$(CONFIG_ATH79_NVRAM) += nvram.o +obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o +obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o + +# +# Machines +# +obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o +obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o +obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o +obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o +obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o +obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o +obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o +obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o +obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o +obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o +obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o +obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o +obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o +obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o +obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o +obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o +obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o +obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o +obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o +obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o +obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o +obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o +obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o +obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o +obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o +obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT) += mach-dlan-hotspot.o +obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o +obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC) += mach-dlan-pro-1200-ac.o +obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o +obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o +obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o +obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o +obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o +obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o +obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o +obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o +obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o +obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o +obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o +obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o +obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o +obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o +obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o +obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o +obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o +obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o +obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o +obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o +obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o +obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o +obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o +obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o +obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o +obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o +obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o +obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o +obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o +obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o +obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o +obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o +obj-$(CONFIG_ATH79_MACH_MR1750) += mach-mr1750.o +obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o +obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o +obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o +obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o +obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o +obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o +obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o +obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o +obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o +obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o +obj-$(CONFIG_ATH79_MACH_ONION_OMEGA) += mach-onion-omega.o +obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o +obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o +obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o +obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o +obj-$(CONFIG_ATH79_MACH_R6100) += mach-r6100.o +obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o +obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o +obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o +obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o +obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o +obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o +obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o +obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o +obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o +obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o +obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o +obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o +obj-$(CONFIG_ATH79_MACH_TEW_732BR) += mach-tew-732br.o +obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o +obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o +obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o +obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o +obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o +obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o +obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2) += mach-tl-wdr3320-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o +obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o +obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o +obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o +obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o +obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o +obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o +obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o +obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o +obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o +obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o +obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o +obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o +obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o +obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o +obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o +obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o +obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o +obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o +obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o +obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o +obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o +obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o +obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o +obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o +obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o +obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o +obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o +obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o +obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o +obj-$(CONFIG_ATH79_MACH_WPJ531) += mach-wpj531.o +obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o +obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o +obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o +obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o +obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o +obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o +obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h new file mode 100644 index 0000000000..550d927af9 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -0,0 +1,240 @@ +/* + * Atheros AR71XX/AR724X/AR913X machine type definitions + * + * Copyright (C) 2008-2010 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _ATH79_MACHTYPE_H +#define _ATH79_MACHTYPE_H + +#include + +enum ath79_mach_type { + ATH79_MACH_GENERIC = 0, + ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */ + ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ + ATH79_MACH_ALL0258N, /* Allnet ALL0258N */ + ATH79_MACH_ALL0305, /* Allnet ALL0305 */ + ATH79_MACH_ALL0315N, /* Allnet ALL0315N */ + ATH79_MACH_ANTMINER_S1, /* Antminer S1 */ + ATH79_MACH_ANTMINER_S3, /* Antminer S3 */ + ATH79_MACH_ARDUINO_YUN, /* Yun */ + ATH79_MACH_AP113, /* Atheros AP113 reference board */ + ATH79_MACH_AP121, /* Atheros AP121 reference board */ + ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ + ATH79_MACH_AP132, /* Atheros AP132 reference board */ + ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ + ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ + ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ + ATH79_MACH_AP143, /* Atheros AP143 reference board */ + ATH79_MACH_AP147_010, /* Atheros AP147-010 reference board */ + ATH79_MACH_AP152, /* Atheros AP152 reference board */ + ATH79_MACH_AP81, /* Atheros AP81 reference board */ + ATH79_MACH_AP83, /* Atheros AP83 */ + ATH79_MACH_AP96, /* Atheros AP96 */ + ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */ + ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ + ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ + ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ + ATH79_MACH_BSB, /* Smart Electronics Black Swift board */ + ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ + ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ + ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */ + ATH79_MACH_CPE510, /* TP-LINK CPE510 */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ + ATH79_MACH_DGL_5500_A1, /* D-link DGL-5500 rev. A1 */ + ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */ + ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ + ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ + ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ + ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */ + ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ + ATH79_MACH_DIR_615_I1, /* D-Link DIR-615 rev. I1 */ + ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ + ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ + ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ + ATH79_MACH_DLAN_HOTSPOT, /* devolo dLAN Hotspot */ + ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */ + ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/ + ATH79_MACH_DR344, /* Wallys DR344 */ + ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ + ATH79_MACH_ESR900, /* EnGenius ESR900 */ + ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ + ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ + ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ + ATH79_MACH_EAP7660D, /* Senao EAP7660D */ + ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ + ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ + ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ + ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ + ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ + ATH79_MACH_GL_AR150, /* GL-AR150 support */ + ATH79_MACH_GL_AR300, /* GL-AR300 */ + ATH79_MACH_GL_DOMINO, /* Domino */ + ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ + ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */ + ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ + ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ + ATH79_MACH_JA76PF, /* jjPlus JA76PF */ + ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ + ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ + ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ + ATH79_MACH_MR12, /* Cisco Meraki MR12 */ + ATH79_MACH_MR16, /* Cisco Meraki MR16 */ + ATH79_MACH_MR1750, /* OpenMesh MR1750 */ + ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ + ATH79_MACH_MR600, /* OpenMesh MR600 */ + ATH79_MACH_MR900, /* OpenMesh MR900 */ + ATH79_MACH_MR900v2, /* OpenMesh MR900v2 */ + ATH79_MACH_MYNET_N600, /* WD My Net N600 */ + ATH79_MACH_MYNET_N750, /* WD My Net N750 */ + ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */ + ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ + ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ + ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ + ATH79_MACH_NBG6616, /* Zyxel NBG6616 */ + ATH79_MACH_NBG6716, /* Zyxel NBG6716 */ + ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */ + ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ + ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ + ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */ + ATH79_MACH_OM2P, /* OpenMesh OM2P */ + ATH79_MACH_OM5P_AN, /* OpenMesh OM5P-AN */ + ATH79_MACH_OM5P, /* OpenMesh OM5P */ + ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */ + ATH79_MACH_PB42, /* Atheros PB42 */ + ATH79_MACH_PB92, /* Atheros PB92 */ + ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */ + ATH79_MACH_R6100, /* NETGEAR R6100 */ + ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ + ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ + ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ + ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ + ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */ + ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ + ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */ + ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ + ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ + ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */ + ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */ + ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */ + ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ + ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */ + ATH79_MACH_RB_922GS, /* Mikrotik RouterBOARD 911/922GS boards */ + ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ + ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ + ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ + ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ + ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ + ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */ + ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ + ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ + ATH79_MACH_RW2458N, /* Redwave RW2458N */ + ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */ + ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ + ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ + ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ + ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */ + ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R*/ + ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */ + ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ + ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */ + ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ + ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */ + ATH79_MACH_TL_MR3040_V2, /* TP-LINK TL-MR3040 v2 */ + ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ + ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */ + ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ + ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */ + ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */ + ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */ + ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */ + ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ + ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */ + ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */ + ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */ + ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */ + ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ + ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ + ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ + ATH79_MACH_TL_WDR3320_V2, /* TP-LINK TL-WDR3320 v2 */ + ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ + ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ + ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */ + ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */ + ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ + ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ + ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */ + ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ + ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ + ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */ + ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3/v4 */ + ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ + ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/ + ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ + ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ + ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */ + ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */ + ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ + ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ + ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */ + ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */ + ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */ + ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */ + ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */ + ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ + ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ + ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */ + ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ + ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ + ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ + ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */ + ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ + ATH79_MACH_UBNT_ROCKET_M_XW, /* Ubiquiti Rocket M XW*/ + ATH79_MACH_UBNT_ROCKET_M_TI, /* Ubiquiti Rocket M TI*/ + ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ + ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */ + ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ + ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ + ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ + ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */ + ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ + ATH79_MACH_WEIO, /* WeIO board */ + ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */ + ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ + ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ + ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */ + ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */ + ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */ + ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ + ATH79_MACH_WNDR3700_V4, /* NETGEAR WNDR3700v4 */ + ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */ + ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ + ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */ + ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */ + ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ + ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ + ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */ + ATH79_MACH_WP543, /* Compex WP543 */ + ATH79_MACH_WPE72, /* Compex WPE72 */ + ATH79_MACH_WPJ344, /* Compex WPJ344 */ + ATH79_MACH_WPJ531, /* Compex WPJ531 */ + ATH79_MACH_WPJ558, /* Compex WPJ558 */ + ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ + ATH79_MACH_WRT400N, /* Linksys WRT400N */ + ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ + ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ + ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ + ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ + ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */ + ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ + ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ +}; + +#endif /* _ATH79_MACHTYPE_H */ diff --git a/target/linux/ar71xx/patches-4.1/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-4.1/602-MIPS-ath79-add-openwrt-stuff.patch index a772d9b6e6..0e65bb73e2 100644 --- a/target/linux/ar71xx/patches-4.1/602-MIPS-ath79-add-openwrt-stuff.patch +++ b/target/linux/ar71xx/patches-4.1/602-MIPS-ath79-add-openwrt-stuff.patch @@ -46,31 +46,3 @@ + def_bool n + endif ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -17,13 +17,25 @@ obj-$(CONFIG_PCI) += pci.o - # Devices - # - obj-y += dev-common.o -+obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o -+obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o -+obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o - obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o - obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o -+obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o -+obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o - obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o - obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o - obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o - - # -+# Miscellaneous objects -+# -+obj-$(CONFIG_ATH79_NVRAM) += nvram.o -+obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o -+obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o -+ -+# - # Machines - # - obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o diff --git a/target/linux/ar71xx/patches-4.1/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-4.1/603-MIPS-ath79-ap121-fixes.patch index 706e5afdfe..773a858ae1 100644 --- a/target/linux/ar71xx/patches-4.1/603-MIPS-ath79-ap121-fixes.patch +++ b/target/linux/ar71xx/patches-4.1/603-MIPS-ath79-ap121-fixes.patch @@ -147,13 +147,3 @@ select ATH79_DEV_USB select ATH79_DEV_WMAC help ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -17,6 +17,7 @@ - enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, - ATH79_MACH_AP121, /* Atheros AP121 reference board */ -+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ diff --git a/target/linux/ar71xx/patches-4.1/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-4.1/608-MIPS-ath79-ubnt-xm-add-more-boards.patch index 24b0f27493..b463d14156 100644 --- a/target/linux/ar71xx/patches-4.1/608-MIPS-ath79-ubnt-xm-add-more-boards.patch +++ b/target/linux/ar71xx/patches-4.1/608-MIPS-ath79-ubnt-xm-add-more-boards.patch @@ -639,21 +639,3 @@ help Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -22,6 +22,15 @@ enum ath79_mach_type { - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ -+ ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ -+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ -+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ -+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ -+ ATH79_MACH_UBNT_ROCKET_M_XW, /* Ubiquiti Rocket M XW*/ -+ ATH79_MACH_UBNT_ROCKET_M_TI, /* Ubiquiti Rocket M TI*/ -+ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ -+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ -+ ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ - ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ - }; - diff --git a/target/linux/ar71xx/patches-4.1/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-4.1/609-MIPS-ath79-ap136-fixes.patch index bf64fc6bf5..4d7902e166 100644 --- a/target/linux/ar71xx/patches-4.1/609-MIPS-ath79-ap136-fixes.patch +++ b/target/linux/ar71xx/patches-4.1/609-MIPS-ath79-ap136-fixes.patch @@ -276,18 +276,6 @@ +MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020", + "Atheros AP135-020 reference board", + ap135_020_setup); ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -18,7 +18,9 @@ enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ -+ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ -+ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -16,16 +16,17 @@ config ATH79_MACH_AP121 diff --git a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-add-openwrt-Kconfig.patch b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-add-openwrt-Kconfig.patch new file mode 100644 index 0000000000..093def8d11 --- /dev/null +++ b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-add-openwrt-Kconfig.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -83,6 +83,8 @@ config ATH79_MACH_UBNT_XM + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. + ++source "arch/mips/ath79/Kconfig.openwrt" ++ + endmenu + + config SOC_AR71XX diff --git a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch deleted file mode 100644 index ecba79fa65..0000000000 --- a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch +++ /dev/null @@ -1,1761 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -16,24 +16,213 @@ - - enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, -+ ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */ -+ ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */ -+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */ -+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */ -+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */ -+ ATH79_MACH_ANTMINER_S1, /* Antminer S1 */ -+ ATH79_MACH_ANTMINER_S3, /* Antminer S3 */ -+ ATH79_MACH_AP113, /* Atheros AP113 reference board */ - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ -+ ATH79_MACH_AP132, /* Atheros AP132 reference board */ - ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ -+ ATH79_MACH_AP143, /* Atheros AP143 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ -+ ATH79_MACH_AP83, /* Atheros AP83 */ -+ ATH79_MACH_AP96, /* Atheros AP96 */ -+ ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */ -+ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ -+ ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ -+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ -+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ -+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ -+ ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */ -+ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ -+ ATH79_MACH_DGL_5500_A1, /* D-link DGL-5500 rev. A1 */ -+ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */ -+ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ -+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ -+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ -+ ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */ -+ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ -+ ATH79_MACH_DIR_615_I1, /* D-Link DIR-615 rev. I1 */ -+ ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ -+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */ -+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ -+ ATH79_MACH_DLAN_HOTSPOT, /* devolo dLAN Hotspot */ -+ ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */ -+ ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/ -+ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ -+ ATH79_MACH_ESR900, /* EnGenius ESR900 */ -+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ -+ ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */ -+ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ -+ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ -+ ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ -+ ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ -+ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ -+ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ -+ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ -+ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ -+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ -+ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ -+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */ -+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */ -+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */ -+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ -+ ATH79_MACH_MR12, /* Cisco Meraki MR12 */ -+ ATH79_MACH_MR16, /* Cisco Meraki MR16 */ -+ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ -+ ATH79_MACH_MR600, /* OpenMesh MR600 */ -+ ATH79_MACH_MR900, /* OpenMesh MR900 */ -+ ATH79_MACH_MR900v2, /* OpenMesh MR900v2 */ -+ ATH79_MACH_MYNET_N600, /* WD My Net N600 */ -+ ATH79_MACH_MYNET_N750, /* WD My Net N750 */ -+ ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */ -+ ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ -+ ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ -+ ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ -+ ATH79_MACH_NBG6616, /* Zyxel NBG6616 */ -+ ATH79_MACH_NBG6716, /* Zyxel NBG6716 */ -+ ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */ -+ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ -+ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ -+ ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */ -+ ATH79_MACH_OM2P, /* OpenMesh OM2P */ -+ ATH79_MACH_OM5P_AN, /* OpenMesh OM5P-AN */ -+ ATH79_MACH_OM5P, /* OpenMesh OM5P */ -+ ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */ -+ ATH79_MACH_PB42, /* Atheros PB42 */ -+ ATH79_MACH_PB92, /* Atheros PB92 */ -+ ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */ -+ ATH79_MACH_R6100, /* NETGEAR R6100 */ -+ ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ -+ ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ -+ ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ -+ ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ -+ ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */ -+ ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ -+ ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */ -+ ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ -+ ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */ -+ ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */ -+ ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */ -+ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */ -+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */ -+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */ -+ ATH79_MACH_RB_922GS, /* Mikrotik RouterBOARD 911/922GS boards */ -+ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ -+ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ -+ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */ -+ ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */ -+ ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */ -+ ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */ -+ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ -+ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ -+ ATH79_MACH_RW2458N, /* Redwave RW2458N */ -+ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */ -+ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ -+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ -+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */ -+ ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */ -+ ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R*/ -+ ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */ -+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */ -+ ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */ -+ ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */ -+ ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */ -+ ATH79_MACH_TL_MR3040_V2, /* TP-LINK TL-MR3040 v2 */ -+ ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ -+ ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */ -+ ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ -+ ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */ -+ ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */ -+ ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */ -+ ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */ -+ ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1*/ -+ ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */ -+ ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */ -+ ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */ -+ ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */ -+ ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ -+ ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ -+ ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ -+ ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ -+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ -+ ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */ -+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ -+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ -+ ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */ -+ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ -+ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ -+ ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */ -+ ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3/v4 */ -+ ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ -+ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/ -+ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ -+ ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ -+ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */ -+ ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */ -+ ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ -+ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ -+ ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */ -+ ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */ -+ ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */ -+ ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */ -+ ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */ - ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */ - ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ -+ ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */ -+ ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ -+ ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */ - ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ -+ ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */ - ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ - ATH79_MACH_UBNT_ROCKET_M_XW, /* Ubiquiti Rocket M XW*/ - ATH79_MACH_UBNT_ROCKET_M_TI, /* Ubiquiti Rocket M TI*/ -+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ -+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */ - ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */ - ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */ - ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */ -+ ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */ - ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ -+ ATH79_MACH_WEIO, /* WeIO board */ -+ ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */ -+ ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */ -+ ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */ -+ ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */ -+ ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */ -+ ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */ -+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */ -+ ATH79_MACH_WNDR3700_V4, /* NETGEAR WNDR3700v4 */ -+ ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */ -+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */ -+ ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */ -+ ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */ -+ ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ -+ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ -+ ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */ -+ ATH79_MACH_WP543, /* Compex WP543 */ -+ ATH79_MACH_WPE72, /* Compex WPE72 */ -+ ATH79_MACH_WPJ344, /* Compex WPJ344 */ -+ ATH79_MACH_WPJ531, /* Compex WPJ531 */ -+ ATH79_MACH_WPJ558, /* Compex WPJ558 */ -+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ -+ ATH79_MACH_WRT400N, /* Linksys WRT400N */ -+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ -+ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ -+ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ -+ ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ -+ ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */ -+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ -+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ - }; - - #endif /* _ATH79_MACHTYPE_H */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -2,6 +2,90 @@ if ATH79 - - menu "Atheros AR71XX/AR724X/AR913X machine selection" - -+config ATH79_MACH_ALFA_AP96 -+ bool "ALFA Network AP96 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_HORNET_UB -+ bool "ALFA Network Hornet-UB board support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_ALFA_NX -+ bool "ALFA Network N2/N5 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TUBE2H -+ bool "ALFA Network Tube2H board support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_ALL0258N -+ bool "Allnet ALL0258N support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_ALL0315N -+ bool "Allnet ALL0315N support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_ANTMINER_S1 -+ bool "Bitmain Antminer S1 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_ANTMINER_S3 -+ bool "Bitmain Antminer S3 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_AP113 -+ bool "Atheros AP113 board support" -+ select SOC_AR724X -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_PB9X_PCI if PCI -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ select ATH79_DEV_ETH -+ - config ATH79_MACH_AP121 - bool "Atheros AP121 reference board" - select SOC_AR933X -@@ -11,62 +95,1125 @@ config ATH79_MACH_AP121 - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP121 reference board. -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP121 reference board. -+ -+config ATH79_MACH_AP132 -+ bool "Atheros AP132 reference board" -+ select SOC_QCA955X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP132 reference boards. -+ -+config ATH79_MACH_AP136 -+ bool "Atheros AP136/AP135 reference board" -+ select SOC_QCA955X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP136 or AP135 reference boards. -+ -+config ATH79_MACH_AP143 -+ bool "Atheros AP143 reference board" -+ select SOC_QCA953X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_SPI -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_ETH -+ select ATH79_DEV_M25P80 -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP143 reference board. -+ -+config ATH79_MACH_AP81 -+ bool "Atheros AP81 reference board" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros AP81 reference board. -+ -+config ATH79_MACH_AP83 -+ bool "Atheros AP83 board support" -+ select SOC_AR913X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_AP96 -+ bool "Atheros AP96 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_DB120 -+ bool "Atheros DB120 reference board" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros DB120 reference board. -+ -+config ATH79_MACH_PB42 -+ bool "Atheros PB42 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_PB44 -+ bool "Atheros PB44 reference board" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_SPI -+ select ATH79_DEV_USB -+ help -+ Say 'Y' here if you want your kernel to support the -+ Atheros PB44 reference board. -+ -+config ATH79_MACH_PB92 -+ bool "Atheros PB92 board support" -+ select SOC_AR724X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_PB9X_PCI if PCI -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_AW_NR580 -+ bool "AzureWave AW-NR580 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_F9K1115V2 -+ bool "Belkin AC1750DB board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_EPG5000 -+ bool "EnGenius EPG5000 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_ESR1750 -+ bool "EnGenius ESR1750 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WHR_HP_G300N -+ bool "Buffalo WHR-HP-G300N board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WLAE_AG300N -+ bool "Buffalo WLAE-AG300N board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WLR8100 -+ bool "Sitecom WLR-8100 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WZR_HP_AG300H -+ bool "Buffalo WZR-HP-AG300H board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WZR_HP_G300NH -+ bool "Buffalo WZR-HP-G300NH board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select RTL8366_SMI -+ -+config ATH79_MACH_WZR_HP_G300NH2 -+ bool "Buffalo WZR-HP-G300NH2 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WZR_HP_G450H -+ bool "Buffalo WZR-HP-G450H board support" -+ select SOC_AR724X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WZR_450HP2 -+ bool "Buffalo WZR-450HP2 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WP543 -+ bool "Compex WP543/WPJ543 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select MYLOADER -+ -+config ATH79_MACH_WPE72 -+ bool "Compex WPE72/WPE72NX board support" -+ select SOC_AR724X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select MYLOADER -+ -+config ATH79_MACH_WPJ344 -+ bool "Compex WPJ344 board support" -+ select SOC_AS934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WPJ531 -+ bool "Compex WPJ531 board support" -+ select SOC_QCA953X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WPJ558 -+ bool "Compex WPJ558 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_DGL_5500_A1 -+ bool "D-Link DGL-5500 A1 support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_DHP_1565_A1 -+ bool "D-Link DHP-1565 rev. A1 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_DIR_505_A1 -+ bool "D-Link DIR-505-A1 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_DIR_600_A1 -+ bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_NVRAM -+ -+config ATH79_MACH_DIR_615_C1 -+ bool "D-Link DIR-615 rev. C1 support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_DIR_615_I1 -+ bool "D-Link DIR-615 rev. I1 support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_DIR_825_B1 -+ bool "D-Link DIR-825 rev. B1 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_DIR_825_C1 -+ bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_DLAN_HOTSPOT -+ bool "devolo dLAN Hotspot support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_DLAN_PRO_500_WP -+ bool "devolo dLAN pro 500 Wireless+ support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_DLAN_PRO_1200_AC -+ bool "devolo dLAN pro 1200+ WiFi ac support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_DRAGINO2 -+ bool "DRAGINO V2 support" -+ select SOC_AR933X -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_ETH -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_ESR900 -+ bool "EnGenius ESR900 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_EW_DORIN -+ bool "embedded wireless Dorin Platform support" -+ select SOC_AR933X -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_ETH -+ help -+ Say 'Y' here if you want your kernel to support the -+ Dorin Platform from www.80211.de . -+ -+config ATH79_MACH_EL_M150 -+ bool "EasyLink EL-M150 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_EL_MINI -+ bool "EasyLink EL-MINI support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_GL_INET -+ bool "GL-INET support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_EAP300V2 -+ bool "EnGenius EAP300 v2 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_GS_OOLITE -+ bool "GS Oolite V1 support" -+ select SOC_AR933X -+ select ARH79_DEV_ETH -+ select ARH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_HIWIFI_HC6361 -+ bool "HiWiFi HC6361 board support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_JA76PF -+ bool "jjPlus JA76PF board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_JWAP003 -+ bool "jjPlus JWAP003 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WRT160NL -+ bool "Linksys WRT160NL board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_WRT400N -+ bool "Linksys WRT400N board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_R6100 -+ bool "NETGEAR R6100 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MC_MAC1200R -+ bool "MERCURY MAC1200R board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_RB4XX -+ bool "MikroTik RouterBOARD 4xx series support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_RB750 -+ bool "MikroTik RouterBOARD 750 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_USB -+ select ATH79_ROUTERBOOT -+ -+config ATH79_MACH_RB91X -+ bool "MikroTik RouterBOARD 91X support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_SPI -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_USB -+ select ATH79_ROUTERBOOT -+ -+config ATH79_MACH_RB922 -+ bool "MikroTik RouterBOARD 922 support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_ROUTERBOOT -+ select RLE_DECOMPRESS -+ -+config ATH79_MACH_RB95X -+ bool "MikroTik RouterBOARD 95X support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_NFC -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_USB -+ select ATH79_ROUTERBOOT -+ -+config ATH79_MACH_RB2011 -+ bool "MikroTik RouterBOARD 2011 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select ATH79_ROUTERBOOT -+ -+config ATH79_MACH_RBSXTLITE -+ bool "MikroTik RouterBOARD SXT Lite" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_NFC -+ select ATH79_DEV_WMAC -+ select ATH79_ROUTERBOOT -+ -+config ATH79_MACH_SMART_300 -+ bool "NC-LINK SMART-300 board support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WNDAP360 -+ bool "NETGEAR WNDAP360 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_WNDR3700 -+ bool "NETGEAR WNDR3700 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WNDR4300 -+ bool "NETGEAR WNDR3700v4/WNDR4300 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WNR2000 -+ bool "NETGEAR WNR2000 board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_WNR2000_V3 -+ bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+ config ATH79_MACH_WNR2200 -+ bool "NETGEAR WNR2200 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_WNR2000_V4 -+ bool "NETGEAR WNR2000 V4" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_OM2P -+ bool "OpenMesh OM2P board support" -+ select SOC_AR724X -+ select SOC_AR933X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_OM5P -+ bool "OpenMesh OM5P board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_ONION_OMEGA -+ bool "ONION OMEGA support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MR12 -+ bool "Meraki MR12 board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MR16 -+ bool "Meraki MR16 board support" -+ select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MR600 -+ bool "OpenMesh MR600 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MZK_W04NU -+ bool "Planex MZK-W04NU board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MZK_W300NH -+ bool "Planex MZK-W300NH board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_RW2458N -+ bool "Redwave RW2458N board support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_CAP4200AG -+ bool "Senao CAP4200AG support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MR900 -+ bool "OpenMesh MR900 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_EAP7660D -+ bool "Senao EAP7660D support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_ARCHER_C7 -+ bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_CPE510 -+ bool "TP-LINK CPE510 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_MR11U -+ bool "TP-LINK TL-MR11U/TL-MR3040 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_MR13U -+ bool "TP-LINK TL-MR13U support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_MR3020 -+ bool "TP-LINK TL-MR3020 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_MR3X20 -+ bool "TP-LINK TL-MR3220/3420 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_TL_WAX50RE -+ bool "TP-LINK TL-WA750/850RE support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WA701ND_V2 -+ bool "TP-LINK TL-WA701ND v2 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WA7210N_V2 -+ bool "TP-LINK TL-WA7210N v2 support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WA830RE_V2 -+ bool "TP-LINK TL-WA830RE v2 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WA901ND -+ bool "TP-LINK TL-WA901ND/TL-WA7510N support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TL_WA901ND_V2 -+ bool "TP-LINK TL-WA901ND v2 support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WDR3500 -+ bool "TP-LINK TL-WDR3500 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WDR4300 -+ bool "TP-LINK TL-WDR3600/4300/4310 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR703N -+ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC - --config ATH79_MACH_AP136 -- bool "Atheros AP136/AP135 reference board" -- select SOC_QCA955X -+config ATH79_MACH_TL_WR720N_V3 -+ bool "TP-LINK TL-WR720N v3/v4 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_NFC -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP136 or AP135 reference boards. - --config ATH79_MACH_AP81 -- bool "Atheros AP81 reference board" -- select SOC_AR913X -+config ATH79_MACH_TL_WR741ND -+ bool "TP-LINK TL-WR741ND support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TL_WR741ND_V4 -+ bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support" -+ select SOC_AR933X - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros AP81 reference board. - --config ATH79_MACH_DB120 -- bool "Atheros DB120 reference board" -+config ATH79_MACH_TL_WR841N_V1 -+ bool "TP-LINK TL-WR841N v1 support" -+ select SOC_AR71XX -+ select ATH79_DEV_DSA -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_TL_WR841N_V8 -+ bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR841N_V9 -+ bool "TP-LINK TL-WR841N/ND v9 support" -+ select SOC_QCA953X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR941ND -+ bool "TP-LINK TL-WR941ND support" -+ select SOC_AR913X -+ select ATH79_DEV_DSA -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR941ND_V6 -+ bool "TP-LINK TL-WR941ND v6 support" -+ select SOC_QCA956X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR1041N_V2 -+ bool "TP-LINK TL-WR1041N v2 support" - select SOC_AR934X - select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 -- select ATH79_DEV_NFC - select ATH79_DEV_USB - select ATH79_DEV_WMAC -- help -- Say 'Y' here if you want your kernel to support the -- Atheros DB120 reference board. - --config ATH79_MACH_PB44 -- bool "Atheros PB44 reference board" -+config ATH79_MACH_TL_WR1043ND -+ bool "TP-LINK TL-WR1043ND support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR1043ND_V2 -+ bool "TP-LINK TL-WR1043ND v2 support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_TL_WR2543N -+ bool "TP-LINK TL-WR2543N/ND support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ -+config ATH79_MACH_TEW_632BRP -+ bool "TRENDnet TEW-632BRP support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_TEW_673GRU -+ bool "TRENDnet TEW-673GRU support" - select SOC_AR71XX -+ select ATH79_DEV_AP9X_PCI if PCI - select ATH79_DEV_ETH - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -- select ATH79_DEV_SPI -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_NVRAM -+ -+config ATH79_MACH_TEW_712BR -+ bool "TRENDnet TEW-712BR support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_TEW_732BR -+ bool "TRENDnet TEW-732BR support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_UBNT -+ bool "Ubiquiti AR71xx based boards support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 - select ATH79_DEV_USB -- help -- Say 'Y' here if you want your kernel to support the -- Atheros PB44 reference board. - - config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM/UniFi boards" -@@ -83,6 +1230,116 @@ config ATH79_MACH_UBNT_XM - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. - -+config ATH79_MACH_WEIO -+ bool "WeIO board" -+ select SOC_AR933X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_MYNET_N600 -+ bool "WD My Net N600 board support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_MYNET_N750 -+ bool "WD My Net N750 board support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_MYNET_REXT -+ bool "WD My Net Wi-Fi Range Extender board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_NVRAM -+ -+config ATH79_MACH_ZCN_1523H -+ bool "Zcomax ZCN-1523H support" -+ select SOC_AR724X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ -+config ATH79_MACH_NBG460N -+ bool "Zyxel NBG460N/550N/550NH board support" -+ select SOC_AR913X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_NBG6716 -+ bool "Zyxel NBG6616/NBG6716 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_NFC -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_CARAMBOLA2 -+ bool "8devices Carambola2 board" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_CF_E316N_V2 -+ bool "COMFAST CF-E316N v2 board" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_BHU_BXU2000N2_A -+ bool "BHU BXU2000n-2 rev. A support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ -+config ATH79_MACH_QIHOO_C301 -+ bool "Qihoo 360 C301 board support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_USB -+ select ATH79_NVRAM -+ - endmenu - - config SOC_AR71XX -@@ -134,7 +1391,10 @@ config ATH79_DEV_DSA - config ATH79_DEV_ETH - def_bool n - --config PCI_AR724X -+config ATH79_DEV_DSA -+ def_bool n -+ -+config ATH79_DEV_ETH - def_bool n - - config ATH79_DEV_GPIO_BUTTONS -@@ -164,6 +1424,11 @@ config ATH79_PCI_ATH9K_FIXUP - def_bool n - - config ATH79_ROUTERBOOT -+ select RLE_DECOMPRESS -+ select LZO_DECOMPRESS -+ def_bool n -+ -+config PCI_AR724X - def_bool n - - endif ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,137 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route - # - # Machines - # -+obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o -+obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o -+obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o -+obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o -+obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o -+obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o -+obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o - obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o -+obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o - obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o -+obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o - obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o -+obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o -+obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o -+obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o -+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o -+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o -+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o -+obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o -+obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o - obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o -+obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT) += mach-dlan-hotspot.o -+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o -+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC) += mach-dlan-pro-1200-ac.o -+obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o -+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o -+obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o -+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o -+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o -+obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o -+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o -+obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o -+obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o -+obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o -+obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o -+obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o -+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o -+obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o -+obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o -+obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o -+obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o -+obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o -+obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o -+obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o -+obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o -+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o -+obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o -+obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o -+obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o -+obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o -+obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o -+obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o -+obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o -+obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o -+obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o -+obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o -+obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o -+obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o -+obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o -+obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o -+obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o -+obj-$(CONFIG_ATH79_MACH_ONION_OMEGA) += mach-onion-omega.o -+obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o - obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o -+obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o -+obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o -+obj-$(CONFIG_ATH79_MACH_R6100) += mach-r6100.o -+obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o -+obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o -+obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o -+obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o -+obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o -+obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o -+obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o -+obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o -+obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o -+obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o -+obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o -+obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o -+obj-$(CONFIG_ATH79_MACH_TEW_732BR) += mach-tew-732br.o -+obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o -+obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o -+obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o -+obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o -+obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o -+obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o -+obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o -+obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o -+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o -+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o -+obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o -+obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o -+obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o -+obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o -+obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o -+obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o -+obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o -+obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o - obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o -+obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o -+obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o -+obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o -+obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o -+obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o -+obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o -+obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o -+obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o -+obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o -+obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o -+obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o -+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o -+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o -+obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o -+obj-$(CONFIG_ATH79_MACH_WPJ531) += mach-wpj531.o -+obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o -+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o -+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o -+obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o -+obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o -+obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o -+obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o -+obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o ---- a/arch/mips/ath79/prom.c -+++ b/arch/mips/ath79/prom.c -@@ -136,6 +136,13 @@ void __init prom_init(void) - initrd_end = initrd_start + fw_getenvl("initrd_size"); - } - #endif -+ -+ if (strstr(arcs_cmdline, "board=750Gr3") || -+ strstr(arcs_cmdline, "board=951G") || -+ strstr(arcs_cmdline, "board=2011L") || -+ strstr(arcs_cmdline, "board=711Gr100") || -+ strstr(arcs_cmdline, "board=922gs")) -+ ath79_prom_append_cmdline("console", "ttyS0,115200"); - } - - void __init prom_free_prom_memory(void) diff --git a/target/linux/ar71xx/patches-4.1/701-MIPS-ath79-add-routerboard-detection.patch b/target/linux/ar71xx/patches-4.1/701-MIPS-ath79-add-routerboard-detection.patch new file mode 100644 index 0000000000..8dee006c80 --- /dev/null +++ b/target/linux/ar71xx/patches-4.1/701-MIPS-ath79-add-routerboard-detection.patch @@ -0,0 +1,16 @@ +--- a/arch/mips/ath79/prom.c ++++ b/arch/mips/ath79/prom.c +@@ -136,6 +136,13 @@ void __init prom_init(void) + initrd_end = initrd_start + fw_getenvl("initrd_size"); + } + #endif ++ ++ if (strstr(arcs_cmdline, "board=750Gr3") || ++ strstr(arcs_cmdline, "board=951G") || ++ strstr(arcs_cmdline, "board=2011L") || ++ strstr(arcs_cmdline, "board=711Gr100") || ++ strstr(arcs_cmdline, "board=922gs")) ++ ath79_prom_append_cmdline("console", "ttyS0,115200"); + } + + void __init prom_free_prom_memory(void) diff --git a/target/linux/ar71xx/patches-4.1/702-MIPS-ath79-openwrt-dr344.patch b/target/linux/ar71xx/patches-4.1/702-MIPS-ath79-openwrt-dr344.patch deleted file mode 100644 index 23cada5570..0000000000 --- a/target/linux/ar71xx/patches-4.1/702-MIPS-ath79-openwrt-dr344.patch +++ /dev/null @@ -1,42 +0,0 @@ -diff -Nru a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig ---- a/arch/mips/ath79/Kconfig 2015-10-27 22:09:32.705886861 +0100 -+++ b/arch/mips/ath79/Kconfig 2015-10-27 22:16:08.822566162 +0100 -@@ -512,6 +512,16 @@ - select ATH79_DEV_NFC - select ATH79_DEV_USB - -+config ATH79_MACH_DR344 -+ bool "Wallys DR344 board support" -+ select SOC_AS934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_DRAGINO2 - bool "DRAGINO V2 support" - select SOC_AR933X -diff -Nru a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h ---- a/arch/mips/ath79/machtypes.h 2015-10-27 22:09:32.706886873 +0100 -+++ b/arch/mips/ath79/machtypes.h 2015-10-27 22:12:28.011957673 +0100 -@@ -60,6 +60,7 @@ - ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */ - ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */ - ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/ -+ ATH79_MACH_DR344, /* Wallys DR344 */ - ATH79_MACH_DRAGINO2, /* Dragino Version 2 */ - ATH79_MACH_ESR900, /* EnGenius ESR900 */ - ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */ -diff -Nru a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile ---- a/arch/mips/ath79/Makefile 2015-10-27 22:09:32.706886873 +0100 -+++ b/arch/mips/ath79/Makefile 2015-10-27 22:17:18.716391867 +0100 -@@ -72,6 +72,7 @@ - obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o - obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o - obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o -+obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o - obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o - obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o - obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o diff --git a/target/linux/ar71xx/patches-4.1/799-MIPS-ath79-add-minibox-v1-support.patch b/target/linux/ar71xx/patches-4.1/799-MIPS-ath79-add-minibox-v1-support.patch deleted file mode 100644 index 6e7a6dc314..0000000000 --- a/target/linux/ar71xx/patches-4.1/799-MIPS-ath79-add-minibox-v1-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -70,6 +70,7 @@ enum ath79_mach_type { - ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ - ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ - ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ -+ ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */ - ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ - ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */ - ATH79_MACH_JA76PF, /* jjPlus JA76PF */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -565,6 +565,16 @@ config ATH79_MACH_EAP300V2 - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -+config ATH79_MACH_GS_MINIBOX_V1 -+ bool "Gainstrong MiniBox V1.0 support" -+ select SOC_AR933X -+ select ARH79_DEV_ETH -+ select ARH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_GS_OOLITE - bool "GS Oolite V1 support" - select SOC_AR933X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -81,6 +81,7 @@ obj-$(CONFIG_ATH79_MACH_EPG5000) += mach - obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o - obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o - obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o -+obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o - obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o - obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o - obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o diff --git a/target/linux/ar71xx/patches-4.1/813-MIPS-ath79-add-ap147-support.patch b/target/linux/ar71xx/patches-4.1/813-MIPS-ath79-add-ap147-support.patch deleted file mode 100644 index ed0d9847bd..0000000000 --- a/target/linux/ar71xx/patches-4.1/813-MIPS-ath79-add-ap147-support.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -138,6 +138,19 @@ config ATH79_MACH_AP143 - Say 'Y' here if you want your kernel to support the - Atheros AP143 reference board. - -+config ATH79_MACH_AP147 -+ bool "Atheros AP147 reference board" -+ select SOC_QCA953X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_AP9X_PCI if PCI -+ help -+ Say 'Y' here if you want your kernel to support the -+ QCA AP147 reference boards. -+ - config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" - select SOC_AR913X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -49,6 +49,7 @@ obj-$(CONFIG_ATH79_MACH_AP121) += mach- - obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o - obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o - obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o -+obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o - obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o - obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o - obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -31,6 +31,7 @@ enum ath79_mach_type { - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ - ATH79_MACH_AP143, /* Atheros AP143 reference board */ -+ ATH79_MACH_AP147_010, /* Atheros AP147-010 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_AP83, /* Atheros AP83 */ - ATH79_MACH_AP96, /* Atheros AP96 */ diff --git a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch deleted file mode 100644 index b3d0b8512a..0000000000 --- a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-blackswift.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -923,6 +923,16 @@ config ATH79_MACH_EAP7660D - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_M25P80 - -+config ATH79_MACH_BSB -+ bool "Smart Electronics Black Swift board" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_ARCHER_C7 - bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" - select SOC_QCA955X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -56,6 +56,7 @@ obj-$(CONFIG_ATH79_MACH_AP96) += mach-a - obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o - obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o - obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o -+obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o - obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o - obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o - obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -39,6 +39,7 @@ enum ath79_mach_type { - ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ - ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */ - ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ -+ ATH79_MACH_BSB, /* Smart Electronics Black Swift board */ - ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ - ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ - ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */ diff --git a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch deleted file mode 100644 index 4fbfb8374f..0000000000 --- a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -1072,6 +1072,17 @@ config ATH79_MACH_TL_WDR4300 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_TL_WDR6500_V2 -+ bool "TP-LINK TL-WDR6500 v2 board support" -+ select SOC_QCA956X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_TL_WR703N - bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support" - select SOC_AR933X ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -158,6 +158,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ - ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ - ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ -+ ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */ - ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */ - ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ - ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -133,6 +133,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += m - obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o - obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o - obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o -+obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o - obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o - obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o - obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o diff --git a/target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-ap152-support.patch b/target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-ap152-support.patch deleted file mode 100644 index b134914c07..0000000000 --- a/target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-ap152-support.patch +++ /dev/null @@ -1,43 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -151,6 +151,20 @@ config ATH79_MACH_AP147 - Say 'Y' here if you want your kernel to support the - QCA AP147 reference boards. - -+config ATH79_MACH_AP152 -+ bool "Atheros AP152 reference board" -+ select SOC_QCA956X -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ select ATH79_DEV_AP9X_PCI if PCI -+ help -+ Say 'Y' here if you want your kernel to support the -+ QCA AP152 reference boards. -+ -+ - config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" - select SOC_AR913X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -50,6 +50,7 @@ obj-$(CONFIG_ATH79_MACH_AP132) += mach- - obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o - obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o - obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o -+obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o - obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o - obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o - obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -32,6 +32,7 @@ enum ath79_mach_type { - ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ - ATH79_MACH_AP143, /* Atheros AP143 reference board */ - ATH79_MACH_AP147_010, /* Atheros AP147-010 reference board */ -+ ATH79_MACH_AP152, /* Atheros AP152 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_AP83, /* Atheros AP83 */ - ATH79_MACH_AP96, /* Atheros AP96 */ diff --git a/target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-mr1750-support.patch b/target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-mr1750-support.patch deleted file mode 100644 index ee6a0615d3..0000000000 --- a/target/linux/ar71xx/patches-4.1/815-MIPS-ath79-add-mr1750-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -919,6 +919,16 @@ config ATH79_MACH_CAP4200AG - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -+config ATH79_MACH_MR1750 -+ bool "OpenMesh MR1750 board support" -+ select SOC_QCA955X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_MR900 - bool "OpenMesh MR900 board support" - select SOC_QCA955X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -93,6 +93,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += ma - obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o - obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o - obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o -+obj-$(CONFIG_ATH79_MACH_MR1750) += mach-mr1750.o - obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o - obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o - obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -82,6 +82,7 @@ enum ath79_mach_type { - ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */ - ATH79_MACH_MR12, /* Cisco Meraki MR12 */ - ATH79_MACH_MR16, /* Cisco Meraki MR16 */ -+ ATH79_MACH_MR1750, /* OpenMesh MR1750 */ - ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ - ATH79_MACH_MR600, /* OpenMesh MR600 */ - ATH79_MACH_MR900, /* OpenMesh MR900 */ diff --git a/target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-tl-wdr3320-v2-support.patch b/target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-tl-wdr3320-v2-support.patch deleted file mode 100644 index 3e583bfee0..0000000000 --- a/target/linux/ar71xx/patches-4.1/816-MIPS-ath79-add-tl-wdr3320-v2-support.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -1074,6 +1074,17 @@ config ATH79_MACH_TL_WA901ND_V2 - select ATH79_DEV_M25P80 - select ATH79_DEV_WMAC - -+config ATH79_MACH_TL_WDR3320_V2 -+ bool "TP-LINK TL-WDR3320 v2 board support" -+ select SOC_AR934X -+ select ATH79_DEV_AP9X_PCI if PCI -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_TL_WDR3500 - bool "TP-LINK TL-WDR3500 board support" - select SOC_AR934X ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -158,6 +158,7 @@ enum ath79_mach_type { - ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ - ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ - ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */ -+ ATH79_MACH_TL_WDR3320_V2, /* TP-LINK TL-WDR3320 v2 */ - ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */ - ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ - ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */ ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -133,6 +133,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) + - obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o - obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o - obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o -+obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2) += mach-tl-wdr3320-v2.o - obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o - obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o - obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o diff --git a/target/linux/ar71xx/patches-4.1/818-MIPS-ath79-add-nu801-led-driver.patch b/target/linux/ar71xx/patches-4.1/818-MIPS-ath79-add-nu801-led-driver.patch index 562388d104..e2642018cb 100644 --- a/target/linux/ar71xx/patches-4.1/818-MIPS-ath79-add-nu801-led-driver.patch +++ b/target/linux/ar71xx/patches-4.1/818-MIPS-ath79-add-nu801-led-driver.patch @@ -1,9 +1,9 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -500,6 +500,13 @@ config LEDS_MENF21BMC - + comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)" - + +config LEDS_NU801 + tristate "LED driver for NU801 RGB LED" + depends on LEDS_CLASS && ATH79_MACH_MR18 diff --git a/target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch b/target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch deleted file mode 100644 index 70073109f4..0000000000 --- a/target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -76,6 +76,19 @@ config ATH79_MACH_ANTMINER_S3 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_ARDUINO_YUN -+ bool "Arduino Yun" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ help -+ Say 'Y' here if you want your kernel to support the -+ Arduino Yun. -+ - config ATH79_MACH_AP113 - bool "Atheros AP113 board support" - select SOC_AR724X ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -23,6 +23,7 @@ enum ath79_mach_type { - ATH79_MACH_ALL0315N, /* Allnet ALL0315N */ - ATH79_MACH_ANTMINER_S1, /* Antminer S1 */ - ATH79_MACH_ANTMINER_S3, /* Antminer S3 */ -+ ATH79_MACH_ARDUINO_YUN, /* Yun */ - ATH79_MACH_AP113, /* Atheros AP113 reference board */ - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -44,6 +44,7 @@ obj-$(CONFIG_ATH79_MACH_ALL0258N) += mac - obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o - obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o - obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o -+obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o - obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o - obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o - obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o diff --git a/target/linux/ar71xx/patches-4.1/911-MIPS-ath79-add-gl_ar150.patch b/target/linux/ar71xx/patches-4.1/911-MIPS-ath79-add-gl_ar150.patch deleted file mode 100644 index 6f42065865..0000000000 --- a/target/linux/ar71xx/patches-4.1/911-MIPS-ath79-add-gl_ar150.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -586,6 +586,16 @@ config ATH79_MACH_EL_MINI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_GL_AR150 -+ bool "GL AR150 support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_GL_INET - bool "GL-INET support" - select SOC_AR933X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -84,6 +84,7 @@ obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach - obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o - obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o - obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o -+obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o - obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o - obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o - obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -73,6 +73,7 @@ enum ath79_mach_type { - ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ - ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ - ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ -+ ATH79_MACH_GL_AR150, /* GL-AR150 support */ - ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ - ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */ - ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ diff --git a/target/linux/ar71xx/patches-4.1/912-MIPS-ath79-add-gl_ar300.patch b/target/linux/ar71xx/patches-4.1/912-MIPS-ath79-add-gl_ar300.patch deleted file mode 100644 index e9c0f4f142..0000000000 --- a/target/linux/ar71xx/patches-4.1/912-MIPS-ath79-add-gl_ar300.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -596,6 +596,16 @@ config ATH79_MACH_GL_AR150 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_GL_AR300 -+ bool "GL_AR300 support" -+ select SOC_AR934X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_GL_INET - bool "GL-INET support" - select SOC_AR933X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -85,6 +85,7 @@ obj-$(CONFIG_ATH79_MACH_EPG5000) += mach - obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o - obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o - obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o -+obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o - obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o - obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o - obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -74,6 +74,7 @@ enum ath79_mach_type { - ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ - ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ - ATH79_MACH_GL_AR150, /* GL-AR150 support */ -+ ATH79_MACH_GL_AR300, /* GL-AR300 */ - ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ - ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */ - ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */ diff --git a/target/linux/ar71xx/patches-4.1/913-MIPS-ath79-add-domino-support.patch b/target/linux/ar71xx/patches-4.1/913-MIPS-ath79-add-domino-support.patch deleted file mode 100644 index 6524ba82e4..0000000000 --- a/target/linux/ar71xx/patches-4.1/913-MIPS-ath79-add-domino-support.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -606,6 +606,16 @@ config ATH79_MACH_GL_AR300 - select ATH79_DEV_USB - select ATH79_DEV_WMAC - -+config ATH79_MACH_GL_DOMINO -+ bool "DOMINO support" -+ select SOC_AR933X -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ select ATH79_DEV_WMAC -+ - config ATH79_MACH_GL_INET - bool "GL-INET support" - select SOC_AR933X ---- a/arch/mips/ath79/Makefile -+++ b/arch/mips/ath79/Makefile -@@ -86,6 +86,7 @@ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach - obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o - obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o - obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o -+obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o - obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o - obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o - obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -75,6 +75,7 @@ enum ath79_mach_type { - ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ - ATH79_MACH_GL_AR150, /* GL-AR150 support */ - ATH79_MACH_GL_AR300, /* GL-AR300 */ -+ ATH79_MACH_GL_DOMINO, /* Domino */ - ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ - ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */ - ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */