From: Robert Marko Date: Fri, 4 Aug 2023 12:39:18 +0000 (+0200) Subject: generic: 6.1: backport support for Marvell 88E6361 switch X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0b6d62c50be039b66a0cd417f75db9fd1ed43650;p=openwrt%2Fstaging%2Flinusw.git generic: 6.1: backport support for Marvell 88E6361 switch New revision of Methode eDPU boards uses Marvell 88E6361 switch, so lets backport it from kernel 6.5. Signed-off-by: Robert Marko --- diff --git a/target/linux/generic/backport-6.1/807-v6.5-01-net-dsa-mv88e6xxx-pass-directly-chip-structure-to-mv.patch b/target/linux/generic/backport-6.1/807-v6.5-01-net-dsa-mv88e6xxx-pass-directly-chip-structure-to-mv.patch new file mode 100644 index 0000000000..58777cd280 --- /dev/null +++ b/target/linux/generic/backport-6.1/807-v6.5-01-net-dsa-mv88e6xxx-pass-directly-chip-structure-to-mv.patch @@ -0,0 +1,64 @@ +From 4f86eb098e18fd0f032877dfa1a7e8c1503ca409 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= +Date: Mon, 29 May 2023 10:02:41 +0200 +Subject: [PATCH 1/6] net: dsa: mv88e6xxx: pass directly chip structure to + mv88e6xxx_phy_is_internal +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Since this function is a simple helper, we do not need to pass a full +dsa_switch structure, we can directly pass the mv88e6xxx_chip structure. +Doing so will allow to share this function with any other function +not manipulating dsa_switch structure but needing info about number of +internal phys + +Signed-off-by: Alexis Lothoré +Reviewed-by: Russell King (Oracle) +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mv88e6xxx/chip.c | 10 ++++------ + 1 file changed, 4 insertions(+), 6 deletions(-) + +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -470,10 +470,8 @@ restore_link: + return err; + } + +-static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port) ++static int mv88e6xxx_phy_is_internal(struct mv88e6xxx_chip *chip, int port) + { +- struct mv88e6xxx_chip *chip = ds->priv; +- + return port < chip->info->num_internal_phys; + } + +@@ -591,7 +589,7 @@ static void mv88e6095_phylink_get_caps(s + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100; + +- if (mv88e6xxx_phy_is_internal(chip->ds, port)) { ++ if (mv88e6xxx_phy_is_internal(chip, port)) { + __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); + } else { + if (cmode < ARRAY_SIZE(mv88e6185_phy_interface_modes) && +@@ -839,7 +837,7 @@ static void mv88e6xxx_get_caps(struct ds + chip->info->ops->phylink_get_caps(chip, port, config); + mv88e6xxx_reg_unlock(chip); + +- if (mv88e6xxx_phy_is_internal(ds, port)) { ++ if (mv88e6xxx_phy_is_internal(chip, port)) { + __set_bit(PHY_INTERFACE_MODE_INTERNAL, + config->supported_interfaces); + /* Internal ports with no phy-mode need GMII for PHYLIB */ +@@ -860,7 +858,7 @@ static void mv88e6xxx_mac_config(struct + + mv88e6xxx_reg_lock(chip); + +- if (mode != MLO_AN_PHY || !mv88e6xxx_phy_is_internal(ds, port)) { ++ if (mode != MLO_AN_PHY || !mv88e6xxx_phy_is_internal(chip, port)) { + /* In inband mode, the link may come up at any time while the + * link is not forced down. Force the link down while we + * reconfigure the interface mode. diff --git a/target/linux/generic/backport-6.1/807-v6.5-02-net-dsa-mv88e6xxx-use-mv88e6xxx_phy_is_internal-in-m.patch b/target/linux/generic/backport-6.1/807-v6.5-02-net-dsa-mv88e6xxx-use-mv88e6xxx_phy_is_internal-in-m.patch new file mode 100644 index 0000000000..75a21a931d --- /dev/null +++ b/target/linux/generic/backport-6.1/807-v6.5-02-net-dsa-mv88e6xxx-use-mv88e6xxx_phy_is_internal-in-m.patch @@ -0,0 +1,31 @@ +From 73cbfad9296eed004992806e056db5b48583ca41 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= +Date: Mon, 29 May 2023 10:02:42 +0200 +Subject: [PATCH 2/6] net: dsa: mv88e6xxx: use mv88e6xxx_phy_is_internal in + mv88e6xxx_port_ppu_updates +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Make sure to use existing helper to get internal PHYs count instead of +redoing it manually + +Signed-off-by: Alexis Lothoré +Reviewed-by: Russell King (Oracle) +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mv88e6xxx/chip.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -484,7 +484,7 @@ static int mv88e6xxx_port_ppu_updates(st + * report whether the port is internal. + */ + if (chip->info->family == MV88E6XXX_FAMILY_6250) +- return port < chip->info->num_internal_phys; ++ return mv88e6xxx_phy_is_internal(chip, port); + + err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®); + if (err) { diff --git a/target/linux/generic/backport-6.1/807-v6.5-03-net-dsa-mv88e6xxx-add-field-to-specify-internal-phys.patch b/target/linux/generic/backport-6.1/807-v6.5-03-net-dsa-mv88e6xxx-add-field-to-specify-internal-phys.patch new file mode 100644 index 0000000000..e24dca819b --- /dev/null +++ b/target/linux/generic/backport-6.1/807-v6.5-03-net-dsa-mv88e6xxx-add-field-to-specify-internal-phys.patch @@ -0,0 +1,69 @@ +From 1414d30660d201f515a9d877571ceea9ca190b6a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= +Date: Mon, 29 May 2023 10:02:43 +0200 +Subject: [PATCH 3/6] net: dsa: mv88e6xxx: add field to specify internal phys + layout +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +mv88e6xxx currently assumes that switch equipped with internal phys have +those phys mapped contiguously starting from port 0 (see +mv88e6xxx_phy_is_internal). However, some switches have internal PHYs but +NOT starting from port 0. For example 88e6393X, 88E6193X and 88E6191X have +integrated PHYs available on ports 1 to 8 +To properly support this offset, add a new field to allow specifying an +internal PHYs layout. If field is not set, default layout is assumed (start +at port 0) + +Signed-off-by: Alexis Lothoré +Reviewed-by: Andrew Lunn +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mv88e6xxx/chip.c | 4 +++- + drivers/net/dsa/mv88e6xxx/chip.h | 5 +++++ + drivers/net/dsa/mv88e6xxx/global2.c | 5 ++++- + 3 files changed, 12 insertions(+), 2 deletions(-) + +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -472,7 +472,9 @@ restore_link: + + static int mv88e6xxx_phy_is_internal(struct mv88e6xxx_chip *chip, int port) + { +- return port < chip->info->num_internal_phys; ++ return port >= chip->info->internal_phys_offset && ++ port < chip->info->num_internal_phys + ++ chip->info->internal_phys_offset; + } + + static int mv88e6xxx_port_ppu_updates(struct mv88e6xxx_chip *chip, int port) +--- a/drivers/net/dsa/mv88e6xxx/chip.h ++++ b/drivers/net/dsa/mv88e6xxx/chip.h +@@ -167,6 +167,11 @@ struct mv88e6xxx_info { + + /* Supports PTP */ + bool ptp_support; ++ ++ /* Internal PHY start index. 0 means that internal PHYs range starts at ++ * port 0, 1 means internal PHYs range starts at port 1, etc ++ */ ++ unsigned int internal_phys_offset; + }; + + struct mv88e6xxx_atu_entry { +--- a/drivers/net/dsa/mv88e6xxx/global2.c ++++ b/drivers/net/dsa/mv88e6xxx/global2.c +@@ -1185,8 +1185,11 @@ int mv88e6xxx_g2_irq_mdio_setup(struct m + struct mii_bus *bus) + { + int phy, irq, err, err_phy; ++ int phy_start = chip->info->internal_phys_offset; ++ int phy_end = chip->info->internal_phys_offset + ++ chip->info->num_internal_phys; + +- for (phy = 0; phy < chip->info->num_internal_phys; phy++) { ++ for (phy = phy_start; phy < phy_end; phy++) { + irq = irq_find_mapping(chip->g2_irq.domain, phy); + if (irq < 0) { + err = irq; diff --git a/target/linux/generic/backport-6.1/807-v6.5-04-net-dsa-mv88e6xxx-fix-88E6393X-family-internal-phys-.patch b/target/linux/generic/backport-6.1/807-v6.5-04-net-dsa-mv88e6xxx-fix-88E6393X-family-internal-phys-.patch new file mode 100644 index 0000000000..b7db7fb1bc --- /dev/null +++ b/target/linux/generic/backport-6.1/807-v6.5-04-net-dsa-mv88e6xxx-fix-88E6393X-family-internal-phys-.patch @@ -0,0 +1,52 @@ +From eb8c75f82a6711387f3b9e03e28923f3e75a761b Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= +Date: Mon, 29 May 2023 10:02:44 +0200 +Subject: [PATCH 4/6] net: dsa: mv88e6xxx: fix 88E6393X family internal phys + layout +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +88E6393X/88E6193X/88E6191X switches have in fact 8 internal PHYs, but those +are not present starting at port 0: supported ports go from 1 to 8 + +Signed-off-by: Alexis Lothoré +Reviewed-by: Andrew Lunn +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mv88e6xxx/chip.c | 9 ++++++--- + 1 file changed, 6 insertions(+), 3 deletions(-) + +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -5942,7 +5942,8 @@ static const struct mv88e6xxx_info mv88e + .name = "Marvell 88E6191X", + .num_databases = 4096, + .num_ports = 11, /* 10 + Z80 */ +- .num_internal_phys = 9, ++ .num_internal_phys = 8, ++ .internal_phys_offset = 1, + .max_vid = 8191, + .max_sid = 63, + .port_base_addr = 0x0, +@@ -5965,7 +5966,8 @@ static const struct mv88e6xxx_info mv88e + .name = "Marvell 88E6193X", + .num_databases = 4096, + .num_ports = 11, /* 10 + Z80 */ +- .num_internal_phys = 9, ++ .num_internal_phys = 8, ++ .internal_phys_offset = 1, + .max_vid = 8191, + .max_sid = 63, + .port_base_addr = 0x0, +@@ -6284,7 +6286,8 @@ static const struct mv88e6xxx_info mv88e + .name = "Marvell 88E6393X", + .num_databases = 4096, + .num_ports = 11, /* 10 + Z80 */ +- .num_internal_phys = 9, ++ .num_internal_phys = 8, ++ .internal_phys_offset = 1, + .max_vid = 8191, + .max_sid = 63, + .port_base_addr = 0x0, diff --git a/target/linux/generic/backport-6.1/807-v6.5-05-net-dsa-mv88e6xxx-pass-mv88e6xxx_chip-structure-to-p.patch b/target/linux/generic/backport-6.1/807-v6.5-05-net-dsa-mv88e6xxx-pass-mv88e6xxx_chip-structure-to-p.patch new file mode 100644 index 0000000000..92ce97b27b --- /dev/null +++ b/target/linux/generic/backport-6.1/807-v6.5-05-net-dsa-mv88e6xxx-pass-mv88e6xxx_chip-structure-to-p.patch @@ -0,0 +1,110 @@ +From cef945452c8468efce75ba0dc8420510a5b84af9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= +Date: Mon, 29 May 2023 10:02:45 +0200 +Subject: [PATCH 5/6] net: dsa: mv88e6xxx: pass mv88e6xxx_chip structure to + port_max_speed_mode +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Some switches families have minor differences on supported link speed for +ports. Instead of redefining a new port_max_speed_mode for each different +configuration, allow to pass mv88e6xxx_chip structure to allow +differentiating those chips by known chip id + +Signed-off-by: Alexis Lothoré +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mv88e6xxx/chip.c | 2 +- + drivers/net/dsa/mv88e6xxx/chip.h | 3 ++- + drivers/net/dsa/mv88e6xxx/port.c | 12 ++++++++---- + drivers/net/dsa/mv88e6xxx/port.h | 12 ++++++++---- + 4 files changed, 19 insertions(+), 10 deletions(-) + +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -3326,7 +3326,7 @@ static int mv88e6xxx_setup_port(struct m + caps = pl_config.mac_capabilities; + + if (chip->info->ops->port_max_speed_mode) +- mode = chip->info->ops->port_max_speed_mode(port); ++ mode = chip->info->ops->port_max_speed_mode(chip, port); + else + mode = PHY_INTERFACE_MODE_NA; + +--- a/drivers/net/dsa/mv88e6xxx/chip.h ++++ b/drivers/net/dsa/mv88e6xxx/chip.h +@@ -508,7 +508,8 @@ struct mv88e6xxx_ops { + int speed, int duplex); + + /* What interface mode should be used for maximum speed? */ +- phy_interface_t (*port_max_speed_mode)(int port); ++ phy_interface_t (*port_max_speed_mode)(struct mv88e6xxx_chip *chip, ++ int port); + + int (*port_tag_remap)(struct mv88e6xxx_chip *chip, int port); + +--- a/drivers/net/dsa/mv88e6xxx/port.c ++++ b/drivers/net/dsa/mv88e6xxx/port.c +@@ -342,7 +342,8 @@ int mv88e6341_port_set_speed_duplex(stru + duplex); + } + +-phy_interface_t mv88e6341_port_max_speed_mode(int port) ++phy_interface_t mv88e6341_port_max_speed_mode(struct mv88e6xxx_chip *chip, ++ int port) + { + if (port == 5) + return PHY_INTERFACE_MODE_2500BASEX; +@@ -381,7 +382,8 @@ int mv88e6390_port_set_speed_duplex(stru + duplex); + } + +-phy_interface_t mv88e6390_port_max_speed_mode(int port) ++phy_interface_t mv88e6390_port_max_speed_mode(struct mv88e6xxx_chip *chip, ++ int port) + { + if (port == 9 || port == 10) + return PHY_INTERFACE_MODE_2500BASEX; +@@ -403,7 +405,8 @@ int mv88e6390x_port_set_speed_duplex(str + duplex); + } + +-phy_interface_t mv88e6390x_port_max_speed_mode(int port) ++phy_interface_t mv88e6390x_port_max_speed_mode(struct mv88e6xxx_chip *chip, ++ int port) + { + if (port == 9 || port == 10) + return PHY_INTERFACE_MODE_XAUI; +@@ -500,7 +503,8 @@ int mv88e6393x_port_set_speed_duplex(str + return 0; + } + +-phy_interface_t mv88e6393x_port_max_speed_mode(int port) ++phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip, ++ int port) + { + if (port == 0 || port == 9 || port == 10) + return PHY_INTERFACE_MODE_10GBASER; +--- a/drivers/net/dsa/mv88e6xxx/port.h ++++ b/drivers/net/dsa/mv88e6xxx/port.h +@@ -359,10 +359,14 @@ int mv88e6390x_port_set_speed_duplex(str + int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port, + int speed, int duplex); + +-phy_interface_t mv88e6341_port_max_speed_mode(int port); +-phy_interface_t mv88e6390_port_max_speed_mode(int port); +-phy_interface_t mv88e6390x_port_max_speed_mode(int port); +-phy_interface_t mv88e6393x_port_max_speed_mode(int port); ++phy_interface_t mv88e6341_port_max_speed_mode(struct mv88e6xxx_chip *chip, ++ int port); ++phy_interface_t mv88e6390_port_max_speed_mode(struct mv88e6xxx_chip *chip, ++ int port); ++phy_interface_t mv88e6390x_port_max_speed_mode(struct mv88e6xxx_chip *chip, ++ int port); ++phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip, ++ int port); + + int mv88e6xxx_port_set_state(struct mv88e6xxx_chip *chip, int port, u8 state); + diff --git a/target/linux/generic/backport-6.1/807-v6.5-06-net-dsa-mv88e6xxx-enable-support-for-88E6361-switch.patch b/target/linux/generic/backport-6.1/807-v6.5-06-net-dsa-mv88e6xxx-enable-support-for-88E6361-switch.patch new file mode 100644 index 0000000000..e5e815d2a4 --- /dev/null +++ b/target/linux/generic/backport-6.1/807-v6.5-06-net-dsa-mv88e6xxx-enable-support-for-88E6361-switch.patch @@ -0,0 +1,153 @@ +From 23680321789863bab2d60af507858ce50ff9f56a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= +Date: Mon, 29 May 2023 10:02:46 +0200 +Subject: [PATCH 6/6] net: dsa: mv88e6xxx: enable support for 88E6361 switch +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Marvell 88E6361 is an 8-port switch derived from the +88E6393X/88E9193X/88E6191X switches family. It can benefit from the +existing mv88e6xxx driver by simply adding the proper switch description in +the driver. Main differences with other switches from this +family are: +- 8 ports exposed (instead of 11): ports 1, 2 and 8 not available +- No 5GBase-x nor SFI/USXGMII support + +Signed-off-by: Alexis Lothoré +Reviewed-by: Andrew Lunn +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mv88e6xxx/chip.c | 42 ++++++++++++++++++++++++++++---- + drivers/net/dsa/mv88e6xxx/chip.h | 3 ++- + drivers/net/dsa/mv88e6xxx/port.c | 14 ++++++++--- + drivers/net/dsa/mv88e6xxx/port.h | 1 + + 4 files changed, 51 insertions(+), 9 deletions(-) + +--- a/drivers/net/dsa/mv88e6xxx/chip.c ++++ b/drivers/net/dsa/mv88e6xxx/chip.c +@@ -797,6 +797,8 @@ static void mv88e6393x_phylink_get_caps( + unsigned long *supported = config->supported_interfaces; + bool is_6191x = + chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6191X; ++ bool is_6361 = ++ chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361; + + mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported); + +@@ -811,13 +813,17 @@ static void mv88e6393x_phylink_get_caps( + /* 6191X supports >1G modes only on port 10 */ + if (!is_6191x || port == 10) { + __set_bit(PHY_INTERFACE_MODE_2500BASEX, supported); +- __set_bit(PHY_INTERFACE_MODE_5GBASER, supported); +- __set_bit(PHY_INTERFACE_MODE_10GBASER, supported); ++ config->mac_capabilities |= MAC_2500FD; ++ ++ /* 6361 only supports up to 2500BaseX */ ++ if (!is_6361) { ++ __set_bit(PHY_INTERFACE_MODE_5GBASER, supported); ++ __set_bit(PHY_INTERFACE_MODE_10GBASER, supported); ++ config->mac_capabilities |= MAC_5000FD | ++ MAC_10000FD; ++ } + /* FIXME: USXGMII is not supported yet */ + /* __set_bit(PHY_INTERFACE_MODE_USXGMII, supported); */ +- +- config->mac_capabilities |= MAC_2500FD | MAC_5000FD | +- MAC_10000FD; + } + } + +@@ -6229,6 +6235,32 @@ static const struct mv88e6xxx_info mv88e + .ptp_support = true, + .ops = &mv88e6352_ops, + }, ++ [MV88E6361] = { ++ .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6361, ++ .family = MV88E6XXX_FAMILY_6393, ++ .name = "Marvell 88E6361", ++ .num_databases = 4096, ++ .num_macs = 16384, ++ .num_ports = 11, ++ /* Ports 1, 2 and 8 are not routed */ ++ .invalid_port_mask = BIT(1) | BIT(2) | BIT(8), ++ .num_internal_phys = 5, ++ .internal_phys_offset = 3, ++ .max_vid = 4095, ++ .max_sid = 63, ++ .port_base_addr = 0x0, ++ .phy_base_addr = 0x0, ++ .global1_addr = 0x1b, ++ .global2_addr = 0x1c, ++ .age_time_coeff = 3750, ++ .g1_irqs = 10, ++ .g2_irqs = 14, ++ .atu_move_port_mask = 0x1f, ++ .pvt = true, ++ .multi_chip = true, ++ .ptp_support = true, ++ .ops = &mv88e6393x_ops, ++ }, + [MV88E6390] = { + .prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6390, + .family = MV88E6XXX_FAMILY_6390, +--- a/drivers/net/dsa/mv88e6xxx/chip.h ++++ b/drivers/net/dsa/mv88e6xxx/chip.h +@@ -82,6 +82,7 @@ enum mv88e6xxx_model { + MV88E6350, + MV88E6351, + MV88E6352, ++ MV88E6361, + MV88E6390, + MV88E6390X, + MV88E6393X, +@@ -100,7 +101,7 @@ enum mv88e6xxx_family { + MV88E6XXX_FAMILY_6351, /* 6171 6175 6350 6351 */ + MV88E6XXX_FAMILY_6352, /* 6172 6176 6240 6352 */ + MV88E6XXX_FAMILY_6390, /* 6190 6190X 6191 6290 6390 6390X */ +- MV88E6XXX_FAMILY_6393, /* 6191X 6193X 6393X */ ++ MV88E6XXX_FAMILY_6393, /* 6191X 6193X 6361 6393X */ + }; + + /** +--- a/drivers/net/dsa/mv88e6xxx/port.c ++++ b/drivers/net/dsa/mv88e6xxx/port.c +@@ -424,6 +424,10 @@ int mv88e6393x_port_set_speed_duplex(str + u16 reg, ctrl; + int err; + ++ if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361 && ++ speed > 2500) ++ return -EOPNOTSUPP; ++ + if (speed == 200 && port != 0) + return -EOPNOTSUPP; + +@@ -506,10 +510,14 @@ int mv88e6393x_port_set_speed_duplex(str + phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip, + int port) + { +- if (port == 0 || port == 9 || port == 10) +- return PHY_INTERFACE_MODE_10GBASER; + +- return PHY_INTERFACE_MODE_NA; ++ if (port != 0 && port != 9 && port != 10) ++ return PHY_INTERFACE_MODE_NA; ++ ++ if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361) ++ return PHY_INTERFACE_MODE_2500BASEX; ++ ++ return PHY_INTERFACE_MODE_10GBASER; + } + + static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port, +--- a/drivers/net/dsa/mv88e6xxx/port.h ++++ b/drivers/net/dsa/mv88e6xxx/port.h +@@ -133,6 +133,7 @@ + #define MV88E6XXX_PORT_SWITCH_ID_PROD_6220 0x2200 + #define MV88E6XXX_PORT_SWITCH_ID_PROD_6240 0x2400 + #define MV88E6XXX_PORT_SWITCH_ID_PROD_6250 0x2500 ++#define MV88E6XXX_PORT_SWITCH_ID_PROD_6361 0x2610 + #define MV88E6XXX_PORT_SWITCH_ID_PROD_6290 0x2900 + #define MV88E6XXX_PORT_SWITCH_ID_PROD_6321 0x3100 + #define MV88E6XXX_PORT_SWITCH_ID_PROD_6141 0x3400 diff --git a/target/linux/generic/hack-6.1/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch b/target/linux/generic/hack-6.1/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch index 9c45115ebb..5a8f253c34 100644 --- a/target/linux/generic/hack-6.1/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch +++ b/target/linux/generic/hack-6.1/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch @@ -9,7 +9,7 @@ Subject: [PATCH] net/dsa/mv88e6xxx: disable ATU violation --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c -@@ -3480,6 +3480,9 @@ static int mv88e6xxx_setup_port(struct m +@@ -3486,6 +3486,9 @@ static int mv88e6xxx_setup_port(struct m else reg = 1 << port; diff --git a/target/linux/generic/pending-6.1/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch b/target/linux/generic/pending-6.1/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch index ac59b4b5ea..a32c7d3603 100644 --- a/target/linux/generic/pending-6.1/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch +++ b/target/linux/generic/pending-6.1/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch @@ -17,7 +17,7 @@ Signed-off-by: Tobias Waldekranz --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c -@@ -6988,6 +6988,7 @@ static int mv88e6xxx_register_switch(str +@@ -7023,6 +7023,7 @@ static int mv88e6xxx_register_switch(str ds->ops = &mv88e6xxx_switch_ops; ds->ageing_time_min = chip->info->age_time_coeff; ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX;