From: Piotr Dymacz Date: Fri, 31 Mar 2017 11:37:31 +0000 (+0200) Subject: ar71xx: add support for ALFA Network AP121F X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0c6165d21ad274261bf8176828e122964e25c215;p=openwrt%2Fstaging%2Fthess.git ar71xx: add support for ALFA Network AP121F ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users. Device is based on Atheros AR9331 WiSoC and is running a custom version (updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz - 1x microSD (optional, on separate PCB) - 3x LED, 1x button, 1x switch - UART header on PCB Flash instruction (under U-Boot web recovery mode): 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with RJ45 port, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 8eaa892b4a..84b1a7dfd9 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -48,6 +48,10 @@ antrouter-r1) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0" ;; +ap121f) + ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" + ;; ap531b0|\ sc1750|\ sc450) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index b2126c0c94..5889b2bf80 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -63,6 +63,7 @@ ar71xx_setup_interfaces() antminer-s1|\ antminer-s3|\ antrouter-r1|\ + ap121f|\ aw-nr580|\ bullet-m|\ c-55|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 75f0826859..7753a7156d 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -30,6 +30,9 @@ get_status_led() { xd3200) status_led="$board:green:system" ;; + ap121f) + status_led="$board:green:vpn" + ;; ap132|\ ap531b0|\ cpe505n|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 5c29a3f0d0..7fd5fb4522 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -416,6 +416,9 @@ ar71xx_board_detect() { *"AP121-MINI") name="ap121-mini" ;; + *"AP121F") + name="ap121f" + ;; *"AP132 reference board") name="ap132" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 949cb6aed5..05b5634aa5 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -203,6 +203,7 @@ platform_check_image() { airgatewaypro|\ airgateway|\ airrouter|\ + ap121f|\ ap132|\ ap531b0|\ ap90q|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index e8d907fcd3..70793af3a3 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -42,6 +42,7 @@ CONFIG_ATH79_MACH_ANTMINER_S1=y CONFIG_ATH79_MACH_ANTMINER_S3=y CONFIG_ATH79_MACH_ANTROUTER_R1=y CONFIG_ATH79_MACH_AP121=y +CONFIG_ATH79_MACH_AP121F=y CONFIG_ATH79_MACH_AP132=y CONFIG_ATH79_MACH_AP136=y CONFIG_ATH79_MACH_AP143=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 055dddf33d..ff9c3037a1 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -16,6 +16,16 @@ config ATH79_MACH_ALFA_AP120C select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_AP121F + bool "ALFA Network AP121F support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_ALFA_AP96 bool "ALFA Network AP96 board support" select SOC_AR71XX diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 3f589f7e2e..469b6a794c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_ATH79_MACH_ANTMINER_S1) += mach-antminer-s1.o obj-$(CONFIG_ATH79_MACH_ANTMINER_S3) += mach-antminer-s3.o obj-$(CONFIG_ATH79_MACH_ANTROUTER_R1) += mach-antrouter-r1.o obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o +obj-$(CONFIG_ATH79_MACH_AP121F) += mach-ap121f.o obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c new file mode 100644 index 0000000000..955b7faf63 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c @@ -0,0 +1,103 @@ +/* + * ALFA Network AP121F board support + * + * Copyright (C) 2017 Piotr Dymacz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define AP121F_GPIO_LED_LAN 17 +#define AP121F_GPIO_LED_VPN 27 +#define AP121F_GPIO_LED_WLAN 0 + +#define AP121F_GPIO_MICROSD_EN 26 + +#define AP121F_GPIO_BTN_RESET 12 +#define AP121F_GPIO_BTN_SWITCH 21 + +#define AP121F_KEYS_POLL_INTERVAL 20 +#define AP121F_KEYS_DEBOUNCE_INTERVAL (3 * AP121F_KEYS_POLL_INTERVAL) + +#define AP121F_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led ap121f_leds_gpio[] __initdata = { + { + .name = "ap121f:green:lan", + .gpio = AP121F_GPIO_LED_LAN, + .active_low = 1, + }, { + .name = "ap121f:green:vpn", + .gpio = AP121F_GPIO_LED_VPN, + .active_low = 1, + }, { + .name = "ap121f:green:wlan", + .gpio = AP121F_GPIO_LED_WLAN, + .active_low = 0, + }, +}; + +static struct gpio_keys_button ap121f_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = AP121F_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP121F_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "switch", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = AP121F_KEYS_DEBOUNCE_INTERVAL, + .gpio = AP121F_GPIO_BTN_SWITCH, + .active_low = 0, + }, +}; + +static void __init ap121f_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1f040000); + + ath79_register_m25p80(NULL); + + ath79_setup_ar933x_phy4_switch(false, false); + + /* LAN */ + ath79_register_mdio(0, 0x0); + ath79_init_mac(ath79_eth0_data.mac_addr, art, 0); + ath79_register_eth(0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121f_leds_gpio), + ap121f_leds_gpio); + + ath79_register_gpio_keys_polled(-1, AP121F_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ap121f_gpio_keys), + ap121f_gpio_keys); + + gpio_request_one(AP121F_GPIO_MICROSD_EN, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "microSD enable"); + + ath79_register_wmac(art + AP121F_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_AP121F, "AP121F", "ALFA Network AP121F", ap121f_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 0b70256338..5bc50a42ff 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -30,6 +30,7 @@ enum ath79_mach_type { ATH79_MACH_ANTROUTER_R1, /* Antrouter R1 */ ATH79_MACH_AP121, /* Atheros AP121 reference board */ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ + ATH79_MACH_AP121F, /* ALFA Network AP121F */ ATH79_MACH_AP132, /* Atheros AP132 reference board */ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 3f1486ed63..01c5bdc677 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -75,6 +75,19 @@ define Build/wrgg-pad-rootfs endef +define Device/ap121f + DEVICE_TITLE := ALFA Network AP121F + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage -swconfig + BOARDNAME := AP121F + IMAGE_SIZE := 16064k + CONSOLE := ttyATH0,115200 + MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware) + SUPPORTED_DEVICES := ap121f + IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += ap121f + define Device/ap531b0 DEVICE_TITLE := Rockeetech AP531B0 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 6c81bc2de5..34c2fc1f0f 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -9,6 +9,7 @@ # CONFIG_ATH79_MACH_ANTMINER_S3 is not set # CONFIG_ATH79_MACH_ANTROUTER_R1 is not set # CONFIG_ATH79_MACH_AP121 is not set +# CONFIG_ATH79_MACH_AP121F is not set # CONFIG_ATH79_MACH_AP132 is not set # CONFIG_ATH79_MACH_AP136 is not set # CONFIG_ATH79_MACH_AP143 is not set diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default index 6eff5d0b28..57318b38e8 100644 --- a/target/linux/ar71xx/nand/config-default +++ b/target/linux/ar71xx/nand/config-default @@ -8,6 +8,7 @@ # CONFIG_ATH79_MACH_ANTMINER_S3 is not set # CONFIG_ATH79_MACH_ANTROUTER_R1 is not set # CONFIG_ATH79_MACH_AP121 is not set +# CONFIG_ATH79_MACH_AP121F is not set # CONFIG_ATH79_MACH_AP132 is not set # CONFIG_ATH79_MACH_AP136 is not set # CONFIG_ATH79_MACH_AP143 is not set