From: Thibaut VARENE <hacks@slashdirt.org>
Date: Fri, 28 Jul 2017 21:26:40 +0000 (+0200)
Subject: ramips: Archer C50v1: fix LEDs active levels
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0c81bc296911c72f49bf9b78a27daa47bd91f71f;p=openwrt%2Fstaging%2Fblocktrron.git

ramips: Archer C50v1: fix LEDs active levels

All LEDs GPIOs are active low on this device.

WAN and POWER states were inverted. Add default state for power.

Tested on Archer C50v1.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
---

diff --git a/target/linux/ramips/dts/ArcherC50.dts b/target/linux/ramips/dts/ArcherC50.dts
index ac392f390b..e8a1893300 100644
--- a/target/linux/ramips/dts/ArcherC50.dts
+++ b/target/linux/ramips/dts/ArcherC50.dts
@@ -22,7 +22,7 @@
 
 		power {
 			label = "c50:green:power";
-			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 
 		usb {
@@ -32,7 +32,7 @@
 
 		wan {
 			label = "c50:green:wan";
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 		};
 
 		wan_orange {