From: Suresh Siddha Date: Tue, 24 Jul 2012 23:05:28 +0000 (-0700) Subject: x86, fpu: Consolidate inline asm routines for saving/restoring fpu state X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0ca5bd0d886578ad0afeceaa83458c0f35cb3c6b;p=openwrt%2Fstaging%2Fblogic.git x86, fpu: Consolidate inline asm routines for saving/restoring fpu state Consolidate x86, x86_64 inline asm routines saving/restoring fpu state using config_enabled(). Signed-off-by: Suresh Siddha Link: http://lkml.kernel.org/r/1343171129-2747-3-git-send-email-suresh.b.siddha@intel.com Signed-off-by: H. Peter Anvin --- diff --git a/arch/x86/include/asm/fpu-internal.h b/arch/x86/include/asm/fpu-internal.h index 6f595435ff9e..016acb30fa4a 100644 --- a/arch/x86/include/asm/fpu-internal.h +++ b/arch/x86/include/asm/fpu-internal.h @@ -97,34 +97,24 @@ static inline void sanitize_i387_state(struct task_struct *tsk) __sanitize_i387_state(tsk); } -#ifdef CONFIG_X86_64 -static inline int fxrstor_checking(struct i387_fxsave_struct *fx) -{ - int err; - - /* See comment in fxsave() below. */ -#ifdef CONFIG_AS_FXSAVEQ - asm volatile("1: fxrstorq %[fx]\n\t" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl $-1,%[err]\n" - " jmp 2b\n" - ".previous\n" - _ASM_EXTABLE(1b, 3b) - : [err] "=r" (err) - : [fx] "m" (*fx), "0" (0)); -#else - asm volatile("1: rex64/fxrstor (%[fx])\n\t" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl $-1,%[err]\n" - " jmp 2b\n" - ".previous\n" - _ASM_EXTABLE(1b, 3b) - : [err] "=r" (err) - : [fx] "R" (fx), "m" (*fx), "0" (0)); -#endif - return err; +#define check_insn(insn, output, input...) \ +({ \ + int err; \ + asm volatile("1:" #insn "\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: movl $-1,%[err]\n" \ + " jmp 2b\n" \ + ".previous\n" \ + _ASM_EXTABLE(1b, 3b) \ + : [err] "=r" (err), output \ + : "0"(0), input); \ + err; \ +}) + +static inline int fsave_user(struct i387_fsave_struct __user *fx) +{ + return check_insn(fnsave %[fx]; fwait, [fx] "=m" (*fx), "m" (*fx)); } static inline int fxsave_user(struct i387_fxsave_struct __user *fx) @@ -140,90 +130,73 @@ static inline int fxsave_user(struct i387_fxsave_struct __user *fx) if (unlikely(err)) return -EFAULT; - /* See comment in fxsave() below. */ -#ifdef CONFIG_AS_FXSAVEQ - asm volatile("1: fxsaveq %[fx]\n\t" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl $-1,%[err]\n" - " jmp 2b\n" - ".previous\n" - _ASM_EXTABLE(1b, 3b) - : [err] "=r" (err), [fx] "=m" (*fx) - : "0" (0)); -#else - asm volatile("1: rex64/fxsave (%[fx])\n\t" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: movl $-1,%[err]\n" - " jmp 2b\n" - ".previous\n" - _ASM_EXTABLE(1b, 3b) - : [err] "=r" (err), "=m" (*fx) - : [fx] "R" (fx), "0" (0)); -#endif - if (unlikely(err) && - __clear_user(fx, sizeof(struct i387_fxsave_struct))) - err = -EFAULT; - /* No need to clear here because the caller clears USED_MATH */ - return err; + if (config_enabled(CONFIG_X86_32)) + return check_insn(fxsave %[fx], [fx] "=m" (*fx), "m" (*fx)); + else if (config_enabled(CONFIG_AS_FXSAVEQ)) + return check_insn(fxsaveq %[fx], [fx] "=m" (*fx), "m" (*fx)); + + /* See comment in fpu_fxsave() below. */ + return check_insn(rex64/fxsave (%[fx]), "=m" (*fx), [fx] "R" (fx)); } -static inline void fpu_fxsave(struct fpu *fpu) +static inline int fxrstor_checking(struct i387_fxsave_struct *fx) { - /* Using "rex64; fxsave %0" is broken because, if the memory operand - uses any extended registers for addressing, a second REX prefix - will be generated (to the assembler, rex64 followed by semicolon - is a separate instruction), and hence the 64-bitness is lost. */ + if (config_enabled(CONFIG_X86_32)) + return check_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx)); + else if (config_enabled(CONFIG_AS_FXSAVEQ)) + return check_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx)); -#ifdef CONFIG_AS_FXSAVEQ - /* Using "fxsaveq %0" would be the ideal choice, but is only supported - starting with gas 2.16. */ - __asm__ __volatile__("fxsaveq %0" - : "=m" (fpu->state->fxsave)); -#else - /* Using, as a workaround, the properly prefixed form below isn't - accepted by any binutils version so far released, complaining that - the same type of prefix is used twice if an extended register is - needed for addressing (fix submitted to mainline 2005-11-21). - asm volatile("rex64/fxsave %0" - : "=m" (fpu->state->fxsave)); - This, however, we can work around by forcing the compiler to select - an addressing mode that doesn't require extended registers. */ - asm volatile("rex64/fxsave (%[fx])" - : "=m" (fpu->state->fxsave) - : [fx] "R" (&fpu->state->fxsave)); -#endif + /* See comment in fpu_fxsave() below. */ + return check_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx), + "m" (*fx)); } -int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - compat_sigset_t *set, struct pt_regs *regs); -int ia32_setup_frame(int sig, struct k_sigaction *ka, - compat_sigset_t *set, struct pt_regs *regs); - -#else /* CONFIG_X86_32 */ - -/* perform fxrstor iff the processor has extended states, otherwise frstor */ -static inline int fxrstor_checking(struct i387_fxsave_struct *fx) +static inline int frstor_checking(struct i387_fsave_struct *fx) { - /* - * The "nop" is needed to make the instructions the same - * length. - */ - alternative_input( - "nop ; frstor %1", - "fxrstor %1", - X86_FEATURE_FXSR, - "m" (*fx)); - - return 0; + return check_insn(frstor %[fx], "=m" (*fx), [fx] "m" (*fx)); } static inline void fpu_fxsave(struct fpu *fpu) { - asm volatile("fxsave %[fx]" - : [fx] "=m" (fpu->state->fxsave)); + if (config_enabled(CONFIG_X86_32)) + asm volatile( "fxsave %[fx]" : [fx] "=m" (fpu->state->fxsave)); + else if (config_enabled(CONFIG_AS_FXSAVEQ)) + asm volatile("fxsaveq %0" : "=m" (fpu->state->fxsave)); + else { + /* Using "rex64; fxsave %0" is broken because, if the memory + * operand uses any extended registers for addressing, a second + * REX prefix will be generated (to the assembler, rex64 + * followed by semicolon is a separate instruction), and hence + * the 64-bitness is lost. + * + * Using "fxsaveq %0" would be the ideal choice, but is only + * supported starting with gas 2.16. + * + * Using, as a workaround, the properly prefixed form below + * isn't accepted by any binutils version so far released, + * complaining that the same type of prefix is used twice if + * an extended register is needed for addressing (fix submitted + * to mainline 2005-11-21). + * + * asm volatile("rex64/fxsave %0" : "=m" (fpu->state->fxsave)); + * + * This, however, we can work around by forcing the compiler to + * select an addressing mode that doesn't require extended + * registers. + */ + asm volatile( "rex64/fxsave (%[fx])" + : "=m" (fpu->state->fxsave) + : [fx] "R" (&fpu->state->fxsave)); + } } +#ifdef CONFIG_X86_64 + +int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + compat_sigset_t *set, struct pt_regs *regs); +int ia32_setup_frame(int sig, struct k_sigaction *ka, + compat_sigset_t *set, struct pt_regs *regs); + +#else /* CONFIG_X86_32 */ #define ia32_setup_frame __setup_frame #define ia32_setup_rt_frame __setup_rt_frame @@ -272,17 +245,14 @@ static inline int __save_init_fpu(struct task_struct *tsk) return fpu_save_init(&tsk->thread.fpu); } -static inline int fpu_fxrstor_checking(struct fpu *fpu) -{ - return fxrstor_checking(&fpu->state->fxsave); -} - static inline int fpu_restore_checking(struct fpu *fpu) { if (use_xsave()) - return fpu_xrstor_checking(fpu); + return fpu_xrstor_checking(&fpu->state->xsave); + else if (use_fxsr()) + return fxrstor_checking(&fpu->state->fxsave); else - return fpu_fxrstor_checking(fpu); + return frstor_checking(&fpu->state->fsave); } static inline int restore_fpu_checking(struct task_struct *tsk) diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h index 8a1b6f9b594a..aaac810e8613 100644 --- a/arch/x86/include/asm/xsave.h +++ b/arch/x86/include/asm/xsave.h @@ -42,9 +42,8 @@ extern int check_for_xstate(struct i387_fxsave_struct __user *buf, void __user *fpstate, struct _fpx_sw_bytes *sw); -static inline int fpu_xrstor_checking(struct fpu *fpu) +static inline int fpu_xrstor_checking(struct xsave_struct *fx) { - struct xsave_struct *fx = &fpu->state->xsave; int err; asm volatile("1: .byte " REX_PREFIX "0x0f,0xae,0x2f\n\t" @@ -84,9 +83,6 @@ static inline int xsave_user(struct xsave_struct __user *buf) : [err] "=r" (err) : "D" (buf), "a" (-1), "d" (-1), "0" (0) : "memory"); - if (unlikely(err) && __clear_user(buf, xstate_size)) - err = -EFAULT; - /* No need to clear here because the caller clears USED_MATH */ return err; } diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 9e1a8a7ba6e6..7a3d4df9eaf6 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -176,8 +176,10 @@ int save_i387_xstate(void __user *buf) else err = fxsave_user(buf); - if (err) + if (unlikely(err)) { + __clear_user(buf, xstate_size); return err; + } user_fpu_end(); } else { sanitize_i387_state(tsk);