From: Peter Chen <peter.chen@freescale.com>
Date: Thu, 29 Mar 2012 01:50:06 +0000 (+0800)
Subject: USB: EHCI: remove wrong debug message for port speed
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0ca7eb235de5a72614c4ddd37707f9d9671e5403;p=openwrt%2Fstaging%2Fblogic.git

USB: EHCI: remove wrong debug message for port speed

It displays wrong debug message if we plug in a full/low
speed device at port for builtin TT controller. We can get
device/port speed information at following code of hub_port_init,
so it is better to replace it with debug message of "reset complete".

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 256fbd42e48c..8f57c6e86e87 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -536,7 +536,8 @@ static int check_reset_complete (
 		if (ehci->has_amcc_usb23)
 			set_ohci_hcfs(ehci, 1);
 	} else {
-		ehci_dbg (ehci, "port %d high speed\n", index + 1);
+		ehci_dbg(ehci, "port %d reset complete, port enabled\n",
+			index + 1);
 		/* ensure 440EPx ohci controller state is suspended */
 		if (ehci->has_amcc_usb23)
 			set_ohci_hcfs(ehci, 0);