From: David Ahern Date: Thu, 16 Jun 2016 23:24:25 +0000 (-0700) Subject: net: vrf: Implement get_saddr for IPv6 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0d240e7811c4ec1965760ee4643b5bbc9cfacbb3;p=openwrt%2Fstaging%2Fblogic.git net: vrf: Implement get_saddr for IPv6 IPv6 source address selection needs to consider the real egress route. Similar to IPv4 implement a get_saddr6 method which is called if source address has not been set. The get_saddr6 method does a full lookup which means pulling a route from the VRF FIB table and properly considering linklocal/multicast destination addresses. Lookup failures (eg., unreachable) then cause the source address selection to fail which gets propagated back to the caller. Signed-off-by: David Ahern Signed-off-by: David S. Miller --- diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 32173aa9208e..b3762822b653 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -999,6 +999,46 @@ static struct dst_entry *vrf_get_rt6_dst(const struct net_device *dev, return dst; } + +/* called under rcu_read_lock */ +static int vrf_get_saddr6(struct net_device *dev, const struct sock *sk, + struct flowi6 *fl6) +{ + struct net *net = dev_net(dev); + struct dst_entry *dst; + struct rt6_info *rt; + int err; + + if (rt6_need_strict(&fl6->daddr)) { + rt = vrf_ip6_route_lookup(net, dev, fl6, fl6->flowi6_oif, + RT6_LOOKUP_F_IFACE); + if (unlikely(!rt)) + return 0; + + dst = &rt->dst; + } else { + __u8 flags = fl6->flowi6_flags; + + fl6->flowi6_flags |= FLOWI_FLAG_L3MDEV_SRC; + fl6->flowi6_flags |= FLOWI_FLAG_SKIP_NH_OIF; + + dst = ip6_route_output(net, sk, fl6); + rt = (struct rt6_info *)dst; + + fl6->flowi6_flags = flags; + } + + err = dst->error; + if (!err) { + err = ip6_route_get_saddr(net, rt, &fl6->daddr, + sk ? inet6_sk(sk)->srcprefs : 0, + &fl6->saddr); + } + + dst_release(dst); + + return err; +} #endif static const struct l3mdev_ops vrf_l3mdev_ops = { @@ -1008,6 +1048,7 @@ static const struct l3mdev_ops vrf_l3mdev_ops = { .l3mdev_l3_rcv = vrf_l3_rcv, #if IS_ENABLED(CONFIG_IPV6) .l3mdev_get_rt6_dst = vrf_get_rt6_dst, + .l3mdev_get_saddr6 = vrf_get_saddr6, #endif }; diff --git a/include/net/l3mdev.h b/include/net/l3mdev.h index f8a416ec674c..818fd4f100fc 100644 --- a/include/net/l3mdev.h +++ b/include/net/l3mdev.h @@ -39,6 +39,9 @@ struct l3mdev_ops { /* IPv6 ops */ struct dst_entry * (*l3mdev_get_rt6_dst)(const struct net_device *dev, struct flowi6 *fl6); + int (*l3mdev_get_saddr6)(struct net_device *dev, + const struct sock *sk, + struct flowi6 *fl6); }; #ifdef CONFIG_NET_L3_MASTER_DEV @@ -140,6 +143,8 @@ static inline bool netif_index_is_l3_master(struct net *net, int ifindex) int l3mdev_get_saddr(struct net *net, int ifindex, struct flowi4 *fl4); struct dst_entry *l3mdev_get_rt6_dst(struct net *net, struct flowi6 *fl6); +int l3mdev_get_saddr6(struct net *net, const struct sock *sk, + struct flowi6 *fl6); static inline struct sk_buff *l3mdev_l3_rcv(struct sk_buff *skb, u16 proto) @@ -230,6 +235,12 @@ struct dst_entry *l3mdev_get_rt6_dst(struct net *net, struct flowi6 *fl6) return NULL; } +static inline int l3mdev_get_saddr6(struct net *net, const struct sock *sk, + struct flowi6 *fl6) +{ + return 0; +} + static inline struct sk_buff *l3mdev_ip_rcv(struct sk_buff *skb) { diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index fd3217579b65..1dfc402d9ad1 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -910,6 +910,13 @@ static int ip6_dst_lookup_tail(struct net *net, const struct sock *sk, int err; int flags = 0; + if (ipv6_addr_any(&fl6->saddr) && fl6->flowi6_oif && + (!*dst || !(*dst)->error)) { + err = l3mdev_get_saddr6(net, sk, fl6); + if (err) + goto out_err; + } + /* The correct way to handle this would be to do * ip6_route_get_saddr, and then ip6_route_output; however, * the route-specific preferred source forces the @@ -999,10 +1006,11 @@ static int ip6_dst_lookup_tail(struct net *net, const struct sock *sk, return 0; out_err_release: - if (err == -ENETUNREACH) - IP6_INC_STATS(net, NULL, IPSTATS_MIB_OUTNOROUTES); dst_release(*dst); *dst = NULL; +out_err: + if (err == -ENETUNREACH) + IP6_INC_STATS(net, NULL, IPSTATS_MIB_OUTNOROUTES); return err; } diff --git a/net/l3mdev/l3mdev.c b/net/l3mdev/l3mdev.c index d90e4ef09e85..c4a1c3e84e12 100644 --- a/net/l3mdev/l3mdev.c +++ b/net/l3mdev/l3mdev.c @@ -162,6 +162,30 @@ int l3mdev_get_saddr(struct net *net, int ifindex, struct flowi4 *fl4) } EXPORT_SYMBOL_GPL(l3mdev_get_saddr); +int l3mdev_get_saddr6(struct net *net, const struct sock *sk, + struct flowi6 *fl6) +{ + struct net_device *dev; + int rc = 0; + + if (fl6->flowi6_oif) { + rcu_read_lock(); + + dev = dev_get_by_index_rcu(net, fl6->flowi6_oif); + if (dev && netif_is_l3_slave(dev)) + dev = netdev_master_upper_dev_get_rcu(dev); + + if (dev && netif_is_l3_master(dev) && + dev->l3mdev_ops->l3mdev_get_saddr6) + rc = dev->l3mdev_ops->l3mdev_get_saddr6(dev, sk, fl6); + + rcu_read_unlock(); + } + + return rc; +} +EXPORT_SYMBOL_GPL(l3mdev_get_saddr6); + /** * l3mdev_fib_rule_match - Determine if flowi references an * L3 master device