From: Wim Van Sebroeck Date: Fri, 11 May 2007 18:59:24 +0000 (+0000) Subject: [WATCHDOG] iTCO_wdt.c - fix ACPI Base register X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0d4804b31f91cfbcff6d62af0bc09a893a1c8ae0;p=openwrt%2Fstaging%2Fblogic.git [WATCHDOG] iTCO_wdt.c - fix ACPI Base register The ACPI/PM base I/O address which is the base for the TCO registers is defined as bits [15:7] (highest bit is 31, lowest is 0) The code however only reads bits [14:7]. So base_address &= 0x00007f80; needs to be: base_address &= 0x0000ff80; This patch fixes this. Signed-off-by: Ate Wijma Signed-off-by: Wim Van Sebroeck --- diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c index 3c9684ccd2f9..eac4f9b9f007 100644 --- a/drivers/char/watchdog/iTCO_wdt.c +++ b/drivers/char/watchdog/iTCO_wdt.c @@ -571,7 +571,7 @@ static int iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, * ACPIBASE is bits [15:7] from 0x40-0x43 */ pci_read_config_dword(pdev, 0x40, &base_address); - base_address &= 0x00007f80; + base_address &= 0x0000ff80; if (base_address == 0x00000000) { /* Something's wrong here, ACPIBASE has to be set */ printk(KERN_ERR PFX "failed to get TCOBASE address\n");