From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Mon, 20 Jul 2020 13:34:04 +0000 (+0200)
Subject: layerscape: harmonize device strings
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0f3c3a5fb2738b25c62eb0ff8ef7d0654c0b9300;p=openwrt%2Fstaging%2Fstintel.git

layerscape: harmonize device strings

OpenWrt lately has harmonized device (definition) names to the
pattern vendor_model to improve overall consistency, also with
other values like the DTS compatible.

This patch applies that scheme to the layerscape target.

Since this (intentionally) creates a bigger overlap between DTS names,
compatible, and device definition name, it also moves DEVICE_DTS and
SUPPORTED_DEVICES definitions to the Device/Default blocks.

Apart from that, it also modifies several packages to use consistent
naming in order to keep the $(1) file references working.

While at it, remove one layer of complexity for the setup in
tfa-layerscape package.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---

diff --git a/package/boot/tfa-layerscape/Makefile b/package/boot/tfa-layerscape/Makefile
index 3110a21fc3..b3e947f3b2 100644
--- a/package/boot/tfa-layerscape/Makefile
+++ b/package/boot/tfa-layerscape/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=tfa-layerscape
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/atf
@@ -37,130 +37,115 @@ define Host/Install
 	$(INSTALL_BIN) $(HOST_BUILD_DIR)/plat/nxp/tools/byte_swap $(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef
 
-define Package/tfa-layerscape/ls1012afrdm
+define Package/tfa-generic
+  SECTION:=boot
+  CATEGORY:=Boot Loaders
+  DEPENDS:=@TARGET_layerscape_armv8_64b +layerscape-rcw +u-boot-fsl_$(subst tfa-,,$(1))
+  VARIANT:=$(subst tfa-,,$(1))
+endef
+
+define Package/tfa-ls1012a-frdm
+  $(Package/tfa-generic)
   TITLE:=NXP LS1012AFRDM Trusted Firmware
   PLAT:=ls1012afrdm
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1012afrdm/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1012afrdm/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1012ardb
+define Package/tfa-ls1012a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS1012ARDB Trusted Firmware
   PLAT:=ls1012ardb
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1012ardb/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1012ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1012afrwy
+define Package/tfa-ls1012a-frwy-sdboot
+  $(Package/tfa-generic)
   TITLE:=NXP LS1012AFRWY Trusted Firmware
   PLAT:=ls1012afrwy
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1012afrwy/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1012afrwy/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1043ardb
+define Package/tfa-ls1043a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS1043ARDB Trusted Firmware
   PLAT:=ls1043ardb
   BOOT_MODE:=nor
-  BIN_BL2:=build/ls1043ardb/release/bl2_nor.pbl
-  BIN_FIP:=build/ls1043ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1043ardb-sdboot
+define Package/tfa-ls1043a-rdb-sdboot
+  $(Package/tfa-generic)
   TITLE:=NXP LS1043ARDB SD Boot Trusted Firmware
   PLAT:=ls1043ardb
   BOOT_MODE:=sd
-  BIN_BL2:=build/ls1043ardb/release/bl2_sd.pbl
-  BIN_FIP:=build/ls1043ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1046ardb
+define Package/tfa-ls1046a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS1046ARDB Trusted Firmware
   PLAT:=ls1046ardb
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1046ardb/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1046ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1046ardb-sdboot
+define Package/tfa-ls1046a-rdb-sdboot
+  $(Package/tfa-generic)
   TITLE:=NXP LS1046ARDB SD Boot Trusted Firmware
   PLAT:=ls1046ardb
   BOOT_MODE:=sd
-  BIN_BL2:=build/ls1046ardb/release/bl2_sd.pbl
-  BIN_FIP:=build/ls1046ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1088ardb
+define Package/tfa-ls1088a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS1088ARDB Trusted Firmware
   PLAT:=ls1088ardb
   BOOT_MODE:=qspi
-  BIN_BL2:=build/ls1088ardb/release/bl2_qspi.pbl
-  BIN_FIP:=build/ls1088ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls1088ardb-sdboot
+define Package/tfa-ls1088a-rdb-sdboot
+  $(Package/tfa-generic)
   TITLE:=NXP LS1088ARDB SD Boot Trusted Firmware
   PLAT:=ls1088ardb
   BOOT_MODE:=sd
-  BIN_BL2:=build/ls1088ardb/release/bl2_sd.pbl
-  BIN_FIP:=build/ls1088ardb/release/fip.bin
 endef
 
-define Package/tfa-layerscape/ls2088ardb
+define Package/tfa-ls2088a-rdb
+  $(Package/tfa-generic)
   TITLE:=NXP LS2088ARDB Trusted Firmware
   PLAT:=ls2088ardb
   BOOT_MODE:=nor
-  BIN_BL2:=build/ls2088ardb/release/bl2_nor.pbl
-  BIN_FIP:=build/ls2088ardb/release/fip.bin
-endef
-
-define Package/tfa-layerscape/Config
-  define Package/tfa-$(1)
-    SECTION:=boot
-    CATEGORY:=Boot Loaders
-    TITLE:=$(2)
-    DEPENDS:=@TARGET_layerscape_armv8_64b +layerscape-rcw +u-boot-$(1)
-    VARIANT:=$(1)
-    BIN_BL2:=$(3)
-    BIN_FIP:=$(4)
-  endef
 endef
 
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
-	$(CP) $(PKG_BUILD_DIR)/$(BIN_BL2) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-bl2.pbl
-	$(CP) $(PKG_BUILD_DIR)/$(BIN_FIP) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-fip.bin
+	$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/bl2_$(BOOT_MODE).pbl \
+		$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-bl2.pbl
+	$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/fip.bin \
+		$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-fip.bin
 endef
 
 define Build/Compile
-	$(eval $(Package/tfa-layerscape/$(BUILD_VARIANT))) \
+	$(eval $(Package/tfa-$(BUILD_VARIANT))) \
 	$(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE=$(TARGET_CROSS) \
 		fip pbl PLAT=$(PLAT) BOOT_MODE=$(BOOT_MODE) \
-		RCW=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-rcw.bin \
-		BL33=$(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-uboot.bin \
+		RCW=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-rcw.bin \
+		BL33=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-uboot.bin \
 		FIPTOOL=$(STAGING_DIR_HOST)/bin/tfa-fiptool \
 		CREATE_PBL=$(STAGING_DIR_HOST)/bin/tfa-create-pbl \
 		BYTE_SWAP=$(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef
 
 TFAS := \
-  ls1012afrdm \
-  ls1012ardb \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1043ardb-sdboot \
-  ls1046ardb \
-  ls1046ardb-sdboot \
-  ls1088ardb \
-  ls1088ardb-sdboot \
-  ls2088ardb
+  ls1012a-frdm \
+  ls1012a-rdb \
+  ls1012a-frwy-sdboot \
+  ls1043a-rdb \
+  ls1043a-rdb-sdboot \
+  ls1046a-rdb \
+  ls1046a-rdb-sdboot \
+  ls1088a-rdb \
+  ls1088a-rdb-sdboot \
+  ls2088a-rdb
 
 $(eval $(call HostBuild))
 $(foreach tfa,$(TFAS), \
-  $(eval $(Package/tfa-layerscape/$(tfa))) \
-  $(eval $(call Package/tfa-layerscape/Config,$(tfa),$(TITLE),$(BIN_BL2),$(BIN_FIP))) \
   $(eval $(call BuildPackage,tfa-$(tfa))) \
 )
diff --git a/package/boot/uboot-layerscape/Makefile b/package/boot/uboot-layerscape/Makefile
index 1cc746f9a6..294045288b 100644
--- a/package/boot/uboot-layerscape/Makefile
+++ b/package/boot/uboot-layerscape/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uboot-layerscape
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot
@@ -27,67 +27,67 @@ define U-Boot/Default
   ENV_SIZE:=0x2000
 endef
 
-define U-Boot/ls1012afrdm
+define U-Boot/fsl_ls1012a-frdm
   NAME:=NXP LS1012AFRDM
   UBOOT_CONFIG:=ls1012afrdm_tfa
   ENV_SIZE:=0x40000
 endef
 
-define U-Boot/ls1012ardb
+define U-Boot/fsl_ls1012a-rdb
   NAME:=NXP LS1012ARDB
   UBOOT_CONFIG:=ls1012ardb_tfa
   ENV_SIZE:=0x40000
 endef
 
-define U-Boot/ls1012afrwy
+define U-Boot/fsl_ls1012a-frwy-sdboot
   NAME:=NXP LS1012AFRWY
   UBOOT_CONFIG:=ls1012afrwy_tfa
   ENV_SIZE:=0x10000
 endef
 
-define U-Boot/ls1043ardb
+define U-Boot/fsl_ls1043a-rdb
   NAME:=NXP LS1043ARDB
   UBOOT_CONFIG:=ls1043ardb_tfa
 endef
 
-define U-Boot/ls1043ardb-sdboot
+define U-Boot/fsl_ls1043a-rdb-sdboot
   NAME:=NXP LS1043ARDB SD Card Boot
   UBOOT_CONFIG:=ls1043ardb_tfa
 endef
 
-define U-Boot/ls1046ardb
+define U-Boot/fsl_ls1046a-rdb
   NAME:=NXP LS1046ARDB
   UBOOT_CONFIG:=ls1046ardb_tfa
 endef
 
-define U-Boot/ls1046ardb-sdboot
+define U-Boot/fsl_ls1046a-rdb-sdboot
   NAME:=NXP LS1046ARDB SD Card Boot
   UBOOT_CONFIG:=ls1046ardb_tfa
 endef
 
-define U-Boot/ls1088ardb
+define U-Boot/fsl_ls1088a-rdb
   NAME:=NXP LS1088ARDB
   UBOOT_CONFIG:=ls1088ardb_tfa
 endef
 
-define U-Boot/ls1088ardb-sdboot
+define U-Boot/fsl_ls1088a-rdb-sdboot
   NAME:=NXP LS1088ARDB SD Card Boot
   UBOOT_CONFIG:=ls1088ardb_tfa
 endef
 
-define U-Boot/ls2088ardb
+define U-Boot/fsl_ls2088a-rdb
   NAME:=NXP LS2088ARDB
   UBOOT_CONFIG:=ls2088ardb_tfa
 endef
 
-define U-Boot/ls1021atwr
+define U-Boot/fsl_ls1021a-twr
   NAME:=NXP LS1021ATWR
   BUILD_SUBTARGET:=armv7
   UBOOT_CONFIG:=ls1021atwr_nor
   ENV_SIZE:=0x20000
 endef
 
-define U-Boot/ls1021atwr-sdboot
+define U-Boot/fsl_ls1021a-twr-sdboot
   NAME:=NXP LS1021ATWR SD Card Boot
   BUILD_SUBTARGET:=armv7
   UBOOT_CONFIG:=ls1021atwr_sdcard_ifc
@@ -95,7 +95,7 @@ define U-Boot/ls1021atwr-sdboot
   ENV_SIZE:=0x20000
 endef
 
-define U-Boot/ls1021aiot-sdboot
+define U-Boot/fsl_ls1021a-iot-sdboot
   NAME:=NXP LS1021AIOT SD Card Boot
   BUILD_SUBTARGET:=armv7
   UBOOT_CONFIG:=ls1021aiot_sdcard
@@ -104,19 +104,19 @@ define U-Boot/ls1021aiot-sdboot
 endef
 
 UBOOT_TARGETS := \
-  ls1012afrdm \
-  ls1012ardb \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1043ardb-sdboot \
-  ls1046ardb \
-  ls1046ardb-sdboot \
-  ls1088ardb \
-  ls1088ardb-sdboot \
-  ls2088ardb \
-  ls1021atwr \
-  ls1021atwr-sdboot \
-  ls1021aiot-sdboot
+  fsl_ls1012a-frdm \
+  fsl_ls1012a-rdb \
+  fsl_ls1012a-frwy-sdboot \
+  fsl_ls1043a-rdb \
+  fsl_ls1043a-rdb-sdboot \
+  fsl_ls1046a-rdb \
+  fsl_ls1046a-rdb-sdboot \
+  fsl_ls1088a-rdb \
+  fsl_ls1088a-rdb-sdboot \
+  fsl_ls2088a-rdb \
+  fsl_ls1021a-twr \
+  fsl_ls1021a-twr-sdboot \
+  fsl_ls1021a-iot-sdboot
 
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1012a-frdm-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1012a-frdm-uEnv.txt
new file mode 100644
index 0000000000..f33e6a3f5c
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1012a-frdm-uEnv.txt
@@ -0,0 +1,8 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+qspi_boot=sf probe 0:0;sf read $loadaddr 1000000 2800000;bootm $loadaddr
+bootargs=rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),-(firmware)
+bootcmd=echo starting OpenWrt ...;pfe stop;run qspi_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt
new file mode 100644
index 0000000000..31178df690
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt
@@ -0,0 +1,8 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;pfe stop;run sd_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1012a-rdb-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1012a-rdb-uEnv.txt
new file mode 100644
index 0000000000..f109a98b85
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1012a-rdb-uEnv.txt
@@ -0,0 +1,8 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock8 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;pfe stop;run qspi_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt
new file mode 100644
index 0000000000..7772daa100
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt
@@ -0,0 +1,8 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffff
+initrd_high=0xffffffff
+sd_boot=mmc read ${fdtaddr} 7800 800;mmc read ${loadaddr} 8000 8000;bootm ${loadaddr} - ${fdtaddr}
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;run sd_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt
new file mode 100644
index 0000000000..da286a24ae
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt
@@ -0,0 +1,8 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffff
+initrd_high=0xffffffff
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 cma=64M@0x0-0xb0000000
+bootcmd=echo starting openwrt ...;run sd_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-uEnv.txt
new file mode 100644
index 0000000000..d6c5f56fd9
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-uEnv.txt
@@ -0,0 +1,8 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffff
+initrd_high=0xffffffff
+nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock6 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=60000000.nor:1m(rcw),2m(u-boot),1m(u-boot-env),11m(reserved-1),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware) cma=64M@0x0-0xb0000000
+bootcmd=echo starting openwrt ...;run nor_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt
new file mode 100644
index 0000000000..c1596b506a
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt
@@ -0,0 +1,9 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;run sd_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-uEnv.txt
new file mode 100644
index 0000000000..1214bf40c2
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-uEnv.txt
@@ -0,0 +1,9 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock8 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=60000000.nor:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;run nor_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt
new file mode 100644
index 0000000000..c1596b506a
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt
@@ -0,0 +1,9 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;run sd_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-uEnv.txt
new file mode 100644
index 0000000000..975b1c1e7f
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-uEnv.txt
@@ -0,0 +1,9 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xffffffffffffffff
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;run qspi_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt
new file mode 100644
index 0000000000..2d27f7eb05
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt
@@ -0,0 +1,10 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xa0000000
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+mc_init=mmc read 80000000 5000 1800;mmc read 80300000 7000 800;fsl_mc start mc 80000000 80300000;mmc read 80400000 6800 800;fsl_mc apply dpl 80400000
+sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;run mc_init;run sd_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-uEnv.txt
new file mode 100644
index 0000000000..7ab5550405
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-uEnv.txt
@@ -0,0 +1,10 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xa0000000
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+mc_init=sf probe 0:0;sf read 80000000 a00000 300000;sf read 80300000 e00000 100000;fsl_mc start mc 80000000 80300000;sf read 80400000 d00000 100000;fsl_mc apply dpl 80400000
+qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock10 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=20c0000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;run mc_init;run qspi_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/fsl_ls2088a-rdb-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls2088a-rdb-uEnv.txt
new file mode 100644
index 0000000000..fe2febd2ce
--- /dev/null
+++ b/package/boot/uboot-layerscape/files/fsl_ls2088a-rdb-uEnv.txt
@@ -0,0 +1,10 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+fdt_high=0xa0000000
+initrd_high=0xffffffffffffffff
+hwconfig=fsl_ddr:bank_intlv=auto
+mc_init=fsl_mc start mc 580a00000 580e00000;fsl_mc apply dpl 580d00000
+nor_boot=cp.b 580f00000 $fdtaddr 100000;cp.b 581000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS1,115200 mtdparts=580000000.nor:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
+bootcmd=echo starting openwrt ...;run mc_init;run nor_boot
+bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1012afrdm-uEnv.txt b/package/boot/uboot-layerscape/files/ls1012afrdm-uEnv.txt
deleted file mode 100644
index f33e6a3f5c..0000000000
--- a/package/boot/uboot-layerscape/files/ls1012afrdm-uEnv.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-qspi_boot=sf probe 0:0;sf read $loadaddr 1000000 2800000;bootm $loadaddr
-bootargs=rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),-(firmware)
-bootcmd=echo starting OpenWrt ...;pfe stop;run qspi_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1012afrwy-uEnv.txt b/package/boot/uboot-layerscape/files/ls1012afrwy-uEnv.txt
deleted file mode 100644
index 31178df690..0000000000
--- a/package/boot/uboot-layerscape/files/ls1012afrwy-uEnv.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;pfe stop;run sd_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1012ardb-uEnv.txt b/package/boot/uboot-layerscape/files/ls1012ardb-uEnv.txt
deleted file mode 100644
index f109a98b85..0000000000
--- a/package/boot/uboot-layerscape/files/ls1012ardb-uEnv.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock8 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(pfe),2m(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;pfe stop;run qspi_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1021aiot-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/ls1021aiot-sdboot-uEnv.txt
deleted file mode 100644
index 7772daa100..0000000000
--- a/package/boot/uboot-layerscape/files/ls1021aiot-sdboot-uEnv.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffff
-initrd_high=0xffffffff
-sd_boot=mmc read ${fdtaddr} 7800 800;mmc read ${loadaddr} 8000 8000;bootm ${loadaddr} - ${fdtaddr}
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;run sd_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1021atwr-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/ls1021atwr-sdboot-uEnv.txt
deleted file mode 100644
index da286a24ae..0000000000
--- a/package/boot/uboot-layerscape/files/ls1021atwr-sdboot-uEnv.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffff
-initrd_high=0xffffffff
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 cma=64M@0x0-0xb0000000
-bootcmd=echo starting openwrt ...;run sd_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1021atwr-uEnv.txt b/package/boot/uboot-layerscape/files/ls1021atwr-uEnv.txt
deleted file mode 100644
index d6c5f56fd9..0000000000
--- a/package/boot/uboot-layerscape/files/ls1021atwr-uEnv.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffff
-initrd_high=0xffffffff
-nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock6 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=60000000.nor:1m(rcw),2m(u-boot),1m(u-boot-env),11m(reserved-1),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware) cma=64M@0x0-0xb0000000
-bootcmd=echo starting openwrt ...;run nor_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1043ardb-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/ls1043ardb-sdboot-uEnv.txt
deleted file mode 100644
index c1596b506a..0000000000
--- a/package/boot/uboot-layerscape/files/ls1043ardb-sdboot-uEnv.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;run sd_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1043ardb-uEnv.txt b/package/boot/uboot-layerscape/files/ls1043ardb-uEnv.txt
deleted file mode 100644
index 1214bf40c2..0000000000
--- a/package/boot/uboot-layerscape/files/ls1043ardb-uEnv.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-nor_boot=cp.b 60f00000 $fdtaddr 100000;cp.b 61000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock8 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=60000000.nor:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;run nor_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1046ardb-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/ls1046ardb-sdboot-uEnv.txt
deleted file mode 100644
index c1596b506a..0000000000
--- a/package/boot/uboot-layerscape/files/ls1046ardb-sdboot-uEnv.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;run sd_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1046ardb-uEnv.txt b/package/boot/uboot-layerscape/files/ls1046ardb-uEnv.txt
deleted file mode 100644
index 975b1c1e7f..0000000000
--- a/package/boot/uboot-layerscape/files/ls1046ardb-uEnv.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xffffffffffffffff
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;run qspi_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1088ardb-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/ls1088ardb-sdboot-uEnv.txt
deleted file mode 100644
index 2d27f7eb05..0000000000
--- a/package/boot/uboot-layerscape/files/ls1088ardb-sdboot-uEnv.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xa0000000
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-mc_init=mmc read 80000000 5000 1800;mmc read 80300000 7000 800;fsl_mc start mc 80000000 80300000;mmc read 80400000 6800 800;fsl_mc apply dpl 80400000
-sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
-bootcmd=echo starting openwrt ...;run mc_init;run sd_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls1088ardb-uEnv.txt b/package/boot/uboot-layerscape/files/ls1088ardb-uEnv.txt
deleted file mode 100644
index 7ab5550405..0000000000
--- a/package/boot/uboot-layerscape/files/ls1088ardb-uEnv.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xa0000000
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-mc_init=sf probe 0:0;sf read 80000000 a00000 300000;sf read 80300000 e00000 100000;fsl_mc start mc 80000000 80300000;sf read 80400000 d00000 100000;fsl_mc apply dpl 80400000
-qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock10 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=20c0000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;run mc_init;run qspi_boot
-bootdelay=3
diff --git a/package/boot/uboot-layerscape/files/ls2088ardb-uEnv.txt b/package/boot/uboot-layerscape/files/ls2088ardb-uEnv.txt
deleted file mode 100644
index fe2febd2ce..0000000000
--- a/package/boot/uboot-layerscape/files/ls2088ardb-uEnv.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-fdtaddr=0x8f000000
-loadaddr=0x81000000
-fdt_high=0xa0000000
-initrd_high=0xffffffffffffffff
-hwconfig=fsl_ddr:bank_intlv=auto
-mc_init=fsl_mc start mc 580a00000 580e00000;fsl_mc apply dpl 580d00000
-nor_boot=cp.b 580f00000 $fdtaddr 100000;cp.b 581000000 $loadaddr 1000000;bootm $loadaddr - $fdtaddr
-bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS1,115200 mtdparts=580000000.nor:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),48m@0x1000000(firmware)
-bootcmd=echo starting openwrt ...;run mc_init;run nor_boot
-bootdelay=3
diff --git a/package/firmware/layerscape/fman-ucode/Makefile b/package/firmware/layerscape/fman-ucode/Makefile
index ba1dcf9160..8c76774ac7 100644
--- a/package/firmware/layerscape/fman-ucode/Makefile
+++ b/package/firmware/layerscape/fman-ucode/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=fman-ucode
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-fm-ucode.git
@@ -31,9 +31,9 @@ endef
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_ls1043_r1.1_106_4_18.bin \
-		$(STAGING_DIR_IMAGE)/ls1043ardb-fman.bin
+		$(STAGING_DIR_IMAGE)/fsl_ls1043a-rdb-fman.bin
 	$(CP) $(PKG_BUILD_DIR)/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin \
-		$(STAGING_DIR_IMAGE)/ls1046ardb-fman.bin
+		$(STAGING_DIR_IMAGE)/fsl_ls1046a-rdb-fman.bin
 endef
 
 $(eval $(call BuildPackage,layerscape-fman))
diff --git a/package/firmware/layerscape/ls-dpl/Makefile b/package/firmware/layerscape/ls-dpl/Makefile
index 89238dce36..d056825ac5 100644
--- a/package/firmware/layerscape/ls-dpl/Makefile
+++ b/package/firmware/layerscape/ls-dpl/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-dpl
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/mc-utils
@@ -33,13 +33,13 @@ MAKE_VARS+= \
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/config/ls1088a/RDB/dpl-eth.0x1D_0x0D.dtb \
-		$(STAGING_DIR_IMAGE)/ls1088ardb-dpl.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-dpl.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls1088a/RDB/dpc.0x1D-0x0D.dtb \
-		$(STAGING_DIR_IMAGE)/ls1088ardb-dpc.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-dpc.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls2088a/RDB/dpl-eth.0x2A_0x41.dtb \
-		$(STAGING_DIR_IMAGE)/ls2088ardb-dpl.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpl.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls2088a/RDB/dpc.0x2A_0x41.dtb \
-		$(STAGING_DIR_IMAGE)/ls2088ardb-dpc.dtb
+		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpc.dtb
 endef
 
 $(eval $(call BuildPackage,layerscape-dpl))
diff --git a/package/firmware/layerscape/ls-mc/Makefile b/package/firmware/layerscape/ls-mc/Makefile
index d7b88e01a2..0da0b91533 100644
--- a/package/firmware/layerscape/ls-mc/Makefile
+++ b/package/firmware/layerscape/ls-mc/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-mc
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-mc-binary.git
@@ -31,9 +31,9 @@ endef
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/ls1088a/mc_10.20.4_ls1088a.itb \
-		$(STAGING_DIR_IMAGE)/ls1088ardb-mc.itb
+		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-mc.itb
 	$(CP) $(PKG_BUILD_DIR)/ls2088a/mc_10.20.4_ls2088a.itb \
-		$(STAGING_DIR_IMAGE)/ls2088ardb-mc.itb
+		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-mc.itb
 endef
 
 $(eval $(call BuildPackage,layerscape-mc))
diff --git a/package/firmware/layerscape/ls-rcw/Makefile b/package/firmware/layerscape/ls-rcw/Makefile
index 848c284d5c..dca0f0ff2b 100644
--- a/package/firmware/layerscape/ls-rcw/Makefile
+++ b/package/firmware/layerscape/ls-rcw/Makefile
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-rcw
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
@@ -26,34 +26,34 @@ define Package/layerscape-rcw
 endef
 
 BOARDS := \
-  ls1012ardb \
-  ls1012afrdm \
-  ls1012afrwy \
-  ls1043ardb \
-  ls1043ardb-sdboot \
-  ls1046ardb \
-  ls1046ardb-sdboot \
-  ls1088ardb \
-  ls1088ardb-sdboot \
-  ls2088ardb \
-  ls1021atwr
-
-RCW_ls1012ardb        :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
-RCW_ls1012afrdm       :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
-RCW_ls1012afrwy       :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
-RCW_ls1043ardb        :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
-RCW_ls1043ardb-sdboot :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
-RCW_ls1046ardb        :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
-RCW_ls1046ardb-sdboot :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
-RCW_ls1088ardb        :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
-RCW_ls1088ardb-sdboot :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
-RCW_ls2088ardb        :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
-RCW_ls1021atwr        :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
+  ls1012a-rdb \
+  ls1012a-frdm \
+  ls1012a-frwy-sdboot \
+  ls1043a-rdb \
+  ls1043a-rdb-sdboot \
+  ls1046a-rdb \
+  ls1046a-rdb-sdboot \
+  ls1088a-rdb \
+  ls1088a-rdb-sdboot \
+  ls2088a-rdb \
+  ls1021a-twr
+
+RCW_ls1012a-rdb         :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
+RCW_ls1012a-frdm        :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
+RCW_ls1012a-frwy-sdboot :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
+RCW_ls1043a-rdb         :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
+RCW_ls1043a-rdb-sdboot  :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
+RCW_ls1046a-rdb         :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
+RCW_ls1046a-rdb-sdboot  :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
+RCW_ls1088a-rdb         :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
+RCW_ls1088a-rdb-sdboot  :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
+RCW_ls2088a-rdb         :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
+RCW_ls1021a-twr         :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
 
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(foreach board,$(BOARDS), \
-		$(CP) $(PKG_BUILD_DIR)/$(RCW_$(board)) $(STAGING_DIR_IMAGE)/$(board)-rcw.bin;)
+		$(CP) $(PKG_BUILD_DIR)/$(RCW_$(board)) $(STAGING_DIR_IMAGE)/fsl_$(board)-rcw.bin;)
 endef
 
 $(eval $(call BuildPackage,layerscape-rcw))
diff --git a/target/linux/layerscape/image/armv7.mk b/target/linux/layerscape/image/armv7.mk
index e06c99c338..8a86997399 100644
--- a/target/linux/layerscape/image/armv7.mk
+++ b/target/linux/layerscape/image/armv7.mk
@@ -13,18 +13,19 @@ define Device/Default
   KERNEL_NAME := zImage
   KERNEL_LOADADDR := 0x80008000
   KERNEL_ENTRY_POINT := 0x80008000
+  DEVICE_DTS = $(lastword $(subst _, ,$(1)))
+  SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
   IMAGE_SIZE := 64m
   IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
     append-rootfs | pad-rootfs | \
     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
 endef
 
-define Device/ls1021atwr
+define Device/fsl_ls1021a-twr
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := TWR-LS1021A
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += layerscape-rcw
-  DEVICE_DTS := ls1021a-twr
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-rcw.bin | pad-to 1M | \
@@ -33,11 +34,10 @@ define Device/ls1021atwr
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1021a-twr
 endef
-TARGET_DEVICES += ls1021atwr
+TARGET_DEVICES += fsl_ls1021a-twr
 
-define Device/ls1021atwr-sdboot
+define Device/fsl_ls1021a-twr-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := TWR-LS1021A
   DEVICE_VARIANT := SD Card Boot
@@ -57,16 +57,16 @@ define Device/ls1021atwr-sdboot
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1021a-twr-sdboot
 endef
-TARGET_DEVICES += ls1021atwr-sdboot
+TARGET_DEVICES += fsl_ls1021a-twr-sdboot
 
-define Device/ls1021aiot-sdboot
+define Device/fsl_ls1021a-iot-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1021A-IoT
   DEVICE_VARIANT := SD Card Boot
   DEVICE_DTS := ls1021a-iot
   FILESYSTEMS := ext4
+  SUPPORTED_DEVICES :=
   IMAGES := sdcard.img
   IMAGE/sdcard.img := \
     ls-clean | \
@@ -77,4 +77,4 @@ define Device/ls1021aiot-sdboot
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 endef
-TARGET_DEVICES += ls1021aiot-sdboot
+TARGET_DEVICES += fsl_ls1021a-iot-sdboot
diff --git a/target/linux/layerscape/image/armv8_64b.mk b/target/linux/layerscape/image/armv8_64b.mk
index b190e0c041..1bf956584c 100644
--- a/target/linux/layerscape/image/armv8_64b.mk
+++ b/target/linux/layerscape/image/armv8_64b.mk
@@ -12,20 +12,21 @@ define Device/Default
   KERNEL := kernel-bin | gzip | uImage gzip
   KERNEL_LOADADDR := 0x80080000
   KERNEL_ENTRY_POINT := 0x80080000
+  DEVICE_DTS = freescale/$(subst _,-,$(1))
+  SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
   IMAGE_SIZE := 64m
   IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
     append-rootfs | pad-rootfs | \
     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
 endef
 
-define Device/ls1012afrdm
+define Device/fsl_ls1012a-frdm
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := FRDM-LS1012A
   DEVICE_PACKAGES += \
     layerscape-ppfe \
-    tfa-ls1012afrdm \
+    tfa-ls1012a-frdm \
     kmod-ppfe
-  DEVICE_DTS := freescale/fsl-ls1012a-frdm
   BLOCKSIZE := 256KiB
   IMAGE/firmware.bin := \
     ls-clean | \
@@ -41,18 +42,16 @@ define Device/ls1012afrdm
     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
   KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
   KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-  SUPPORTED_DEVICES := fsl,ls1012a-frdm
 endef
-TARGET_DEVICES += ls1012afrdm
+TARGET_DEVICES += fsl_ls1012a-frdm
 
-define Device/ls1012ardb
+define Device/fsl_ls1012a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1012A-RDB
   DEVICE_PACKAGES += \
     layerscape-ppfe \
-    tfa-ls1012ardb \
+    tfa-ls1012a-rdb \
     kmod-ppfe
-  DEVICE_DTS := freescale/fsl-ls1012a-rdb
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-bl2.pbl | pad-to 1M | \
@@ -62,16 +61,15 @@ define Device/ls1012ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1012a-rdb
 endef
-TARGET_DEVICES += ls1012ardb
+TARGET_DEVICES += fsl_ls1012a-rdb
 
-define Device/ls1012afrwy
+define Device/fsl_ls1012a-frwy-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := FRWY-LS1012A
   DEVICE_PACKAGES += \
     layerscape-ppfe \
-    tfa-ls1012afrwy \
+    tfa-ls1012a-frwy-sdboot \
     kmod-ppfe
   DEVICE_DTS := freescale/fsl-ls1012a-frwy
   FILESYSTEMS := ext4
@@ -94,17 +92,16 @@ define Device/ls1012afrwy
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1012a-frwy-sdboot
 endef
-TARGET_DEVICES += ls1012afrwy
+TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
 
-define Device/ls1043ardb
+define Device/fsl_ls1043a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1043A-RDB
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
     layerscape-fman \
-    tfa-ls1043ardb \
+    tfa-ls1043a-rdb \
     fmc fmc-eth-config
   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
   IMAGE/firmware.bin := \
@@ -116,17 +113,16 @@ define Device/ls1043ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1043a-rdb
 endef
-TARGET_DEVICES += ls1043ardb
+TARGET_DEVICES += fsl_ls1043a-rdb
 
-define Device/ls1043ardb-sdboot
+define Device/fsl_ls1043a-rdb-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1043A-RDB
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
     layerscape-fman \
-    tfa-ls1043ardb-sdboot \
+    tfa-ls1043a-rdb-sdboot \
     fmc fmc-eth-config
   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
   FILESYSTEMS := ext4
@@ -137,7 +133,7 @@ define Device/ls1043ardb-sdboot
     ls-append $(1)-bl2.pbl | pad-to 1M | \
     ls-append $(1)-fip.bin | pad-to 5M | \
     ls-append $(1)-uboot-env.bin | pad-to 9M | \
-    ls-append ls1043ardb-fman.bin | pad-to 15M | \
+    ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
@@ -146,17 +142,16 @@ define Device/ls1043ardb-sdboot
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1043a-rdb-sdboot
 endef
-TARGET_DEVICES += ls1043ardb-sdboot
+TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
 
-define Device/ls1046ardb
+define Device/fsl_ls1046a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1046A-RDB
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
     layerscape-fman \
-    tfa-ls1046ardb \
+    tfa-ls1046a-rdb \
     fmc fmc-eth-config
   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
   IMAGE/firmware.bin := \
@@ -168,17 +163,16 @@ define Device/ls1046ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1046a-rdb
 endef
-TARGET_DEVICES += ls1046ardb
+TARGET_DEVICES += fsl_ls1046a-rdb
 
-define Device/ls1046ardb-sdboot
+define Device/fsl_ls1046a-rdb-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1046A-RDB
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
     layerscape-fman \
-    tfa-ls1046ardb-sdboot \
+    tfa-ls1046a-rdb-sdboot \
     fmc fmc-eth-config
   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
   FILESYSTEMS := ext4
@@ -189,7 +183,7 @@ define Device/ls1046ardb-sdboot
     ls-append $(1)-bl2.pbl | pad-to 1M | \
     ls-append $(1)-fip.bin | pad-to 5M | \
     ls-append $(1)-uboot-env.bin | pad-to 9M | \
-    ls-append ls1046ardb-fman.bin | pad-to 15M | \
+    ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
@@ -198,20 +192,18 @@ define Device/ls1046ardb-sdboot
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1046a-rdb-sdboot
 endef
-TARGET_DEVICES += ls1046ardb-sdboot
+TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
 
-define Device/ls1088ardb
+define Device/fsl_ls1088a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1088A-RDB
   DEVICE_VARIANT := Default
   DEVICE_PACKAGES += \
     layerscape-mc \
     layerscape-dpl \
-    tfa-ls1088ardb \
+    tfa-ls1088a-rdb \
     restool
-  DEVICE_DTS := freescale/fsl-ls1088a-rdb
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-bl2.pbl | pad-to 1M | \
@@ -223,18 +215,17 @@ define Device/ls1088ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls1088a-rdb
 endef
-TARGET_DEVICES += ls1088ardb
+TARGET_DEVICES += fsl_ls1088a-rdb
 
-define Device/ls1088ardb-sdboot
+define Device/fsl_ls1088a-rdb-sdboot
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS1088A-RDB
   DEVICE_VARIANT := SD Card Boot
   DEVICE_PACKAGES += \
     layerscape-mc \
     layerscape-dpl \
-    tfa-ls1088ardb-sdboot \
+    tfa-ls1088a-rdb-sdboot \
     restool
   DEVICE_DTS := freescale/fsl-ls1088a-rdb
   FILESYSTEMS := ext4
@@ -245,9 +236,9 @@ define Device/ls1088ardb-sdboot
     ls-append $(1)-bl2.pbl | pad-to 1M | \
     ls-append $(1)-fip.bin | pad-to 5M | \
     ls-append $(1)-uboot-env.bin | pad-to 10M | \
-    ls-append ls1088ardb-mc.itb | pad-to 13M | \
-    ls-append ls1088ardb-dpl.dtb | pad-to 14M | \
-    ls-append ls1088ardb-dpc.dtb | pad-to 15M | \
+    ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
+    ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
+    ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
@@ -256,19 +247,17 @@ define Device/ls1088ardb-sdboot
     ls-append-sdhead $(1) | pad-to 16M | \
     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
-  SUPPORTED_DEVICES := fsl,ls1088a-rdb-sdboot
 endef
-TARGET_DEVICES += ls1088ardb-sdboot
+TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
 
-define Device/ls2088ardb
+define Device/fsl_ls2088a-rdb
   DEVICE_VENDOR := NXP
   DEVICE_MODEL := LS2088ARDB
   DEVICE_PACKAGES += \
     layerscape-mc \
     layerscape-dpl \
-    tfa-ls2088ardb \
+    tfa-ls2088a-rdb \
     restool
-  DEVICE_DTS := freescale/fsl-ls2088a-rdb
   IMAGE/firmware.bin := \
     ls-clean | \
     ls-append $(1)-bl2.pbl | pad-to 1M | \
@@ -280,11 +269,10 @@ define Device/ls2088ardb
     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
     append-kernel | pad-to 32M | \
     append-rootfs | pad-rootfs | check-size
-  SUPPORTED_DEVICES := fsl,ls2088a-rdb
 endef
-TARGET_DEVICES += ls2088ardb
+TARGET_DEVICES += fsl_ls2088a-rdb
 
-define Device/traverse-ls1043
+define Device/traverse_ls1043
   DEVICE_VENDOR := Traverse
   DEVICE_MODEL := LS1043 Boards
   KERNEL_NAME := Image
@@ -314,4 +302,4 @@ define Device/traverse-ls1043
   MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
   SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
 endef
-TARGET_DEVICES += traverse-ls1043
+TARGET_DEVICES += traverse_ls1043