From: Ariel Levkovich Date: Mon, 3 Apr 2017 10:11:02 +0000 (+0300) Subject: IB/mlx5: Add inner spec and IPv6 validation in user's flow attribute list X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0f750966dca8ad3999e759e516f601d0d8acc8e1;p=openwrt%2Fstaging%2Fblogic.git IB/mlx5: Add inner spec and IPv6 validation in user's flow attribute list This change fixes an incomplete validation of the user's flow attributes list. Previous implementation validated only matching of IPv4 Ethertype to IPv4 spec of outer headers (in case both Ethernet with specified Ethertype and IP specs were present) and lacked the validation of: 1. Matching of IPv6 Ethertype in Ethernet spec (if such exists) to an IPv6 protocol spec (if such exists). 2. Validation of Ethertype to IP protocol matching on inner headers specs. Which could cause some combinations of unmatching Ethernet and IP protocols to pass validation and apply on the device. The fix adds validation of IPv6 Ethertype and IP spec as well as performing the scan on both outer and inner attributes. Fixes: 038d2ef87572 ("Add flow steering support") Signed-off-by: Ariel Levkovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 3495bba410e3..1c85c39d1d03 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -1968,26 +1968,50 @@ static bool flow_is_multicast_only(struct ib_flow_attr *ib_attr) is_multicast_ether_addr(eth_spec->val.dst_mac); } -static bool is_valid_attr(const struct ib_flow_attr *flow_attr) +static bool is_valid_ethertype(const struct ib_flow_attr *flow_attr, + bool check_inner) { union ib_flow_spec *ib_spec = (union ib_flow_spec *)(flow_attr + 1); - bool has_ipv4_spec = false; - bool eth_type_ipv4 = true; + int inner_bit = check_inner ? IB_FLOW_SPEC_INNER : 0; + bool ipv4_spec_valid, ipv6_spec_valid; + unsigned int ip_spec_type = 0; + bool has_ethertype = false; unsigned int spec_index; + bool mask_valid = true; + u16 eth_type = 0; + bool type_valid; /* Validate that ethertype is correct */ for (spec_index = 0; spec_index < flow_attr->num_of_specs; spec_index++) { - if (ib_spec->type == IB_FLOW_SPEC_ETH && + if ((ib_spec->type == (IB_FLOW_SPEC_ETH | inner_bit)) && ib_spec->eth.mask.ether_type) { - if (!((ib_spec->eth.mask.ether_type == htons(0xffff)) && - ib_spec->eth.val.ether_type == htons(ETH_P_IP))) - eth_type_ipv4 = false; - } else if (ib_spec->type == IB_FLOW_SPEC_IPV4) { - has_ipv4_spec = true; + mask_valid = (ib_spec->eth.mask.ether_type == + htons(0xffff)); + has_ethertype = true; + eth_type = ntohs(ib_spec->eth.val.ether_type); + } else if ((ib_spec->type == (IB_FLOW_SPEC_IPV4 | inner_bit)) || + (ib_spec->type == (IB_FLOW_SPEC_IPV6 | inner_bit))) { + ip_spec_type = ib_spec->type; } ib_spec = (void *)ib_spec + ib_spec->size; } - return !has_ipv4_spec || eth_type_ipv4; + + type_valid = (!has_ethertype) || (!ip_spec_type); + if (!type_valid && mask_valid) { + ipv4_spec_valid = (eth_type == ETH_P_IP) && + (ip_spec_type == (IB_FLOW_SPEC_IPV4 | inner_bit)); + ipv6_spec_valid = (eth_type == ETH_P_IPV6) && + (ip_spec_type == (IB_FLOW_SPEC_IPV6 | inner_bit)); + type_valid = ipv4_spec_valid || ipv6_spec_valid; + } + + return type_valid; +} + +static bool is_valid_attr(const struct ib_flow_attr *flow_attr) +{ + return is_valid_ethertype(flow_attr, false) && + is_valid_ethertype(flow_attr, true); } static void put_flow_table(struct mlx5_ib_dev *dev,