From: Yongbae Park Date: Tue, 3 Mar 2015 04:05:48 +0000 (+0900) Subject: clockevents: sun5i: Fix setup_irq init sequence X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1096be084ac59927158ce80ff1d31c33eed0e565;p=openwrt%2Fstaging%2Fblogic.git clockevents: sun5i: Fix setup_irq init sequence The interrupt is enabled before the handler is set. Even this bug did not appear, it is potentially dangerous as it can lead to a NULL pointer dereference. Fix the error by enabling the interrupt after clockevents_config_and_register() is called. Cc: stable@vger.kernel.org Signed-off-by: Yongbae Park Signed-off-by: Daniel Lezcano --- diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c index 02268448dc85..5dcbf90b8015 100644 --- a/drivers/clocksource/timer-sun5i.c +++ b/drivers/clocksource/timer-sun5i.c @@ -178,10 +178,6 @@ static void __init sun5i_timer_init(struct device_node *node) ticks_per_jiffy = DIV_ROUND_UP(rate, HZ); - ret = setup_irq(irq, &sun5i_timer_irq); - if (ret) - pr_warn("failed to setup irq %d\n", irq); - /* Enable timer0 interrupt */ val = readl(timer_base + TIMER_IRQ_EN_REG); writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG); @@ -191,6 +187,10 @@ static void __init sun5i_timer_init(struct device_node *node) clockevents_config_and_register(&sun5i_clockevent, rate, TIMER_SYNC_TICKS, 0xffffffff); + + ret = setup_irq(irq, &sun5i_timer_irq); + if (ret) + pr_warn("failed to setup irq %d\n", irq); } CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer", sun5i_timer_init);