From: Rafał Miłecki Date: Wed, 30 Jul 2014 21:02:30 +0000 (+0200) Subject: b43: N-PHY: fix "Data bus error" while working in 5 GHz X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=11d14c7921715bf74fe3b43ba82cdade6f6dc476;p=openwrt%2Fstaging%2Fblogic.git b43: N-PHY: fix "Data bus error" while working in 5 GHz When switching from one 5 GHz channel to another 5 GHz channel we need to make sure BPHY is still in a reset. However to access BPHY register we have to switch to 2 GHz mode for a moment. Otherwise this may result in "Data bus error" (noticed by Hauke with BCM43224 connected to the SoC). Reported-by: Hauke Mehrtens Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 1eead7af6899..e2a3f0d5bcc2 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -6217,6 +6217,9 @@ static void b43_nphy_channel_setup(struct b43_wldev *dev, u16 tmp16; if (new_channel->band == IEEE80211_BAND_5GHZ) { + /* Switch to 2 GHz for a moment to access B43_PHY_B_BBCFG */ + b43_phy_mask(dev, B43_NPHY_BANDCTL, ~B43_NPHY_BANDCTL_5GHZ); + tmp16 = b43_read16(dev, B43_MMIO_PSM_PHY_HDR); b43_write16(dev, B43_MMIO_PSM_PHY_HDR, tmp16 | 4); /* Put BPHY in the reset */