From: Thomas Petazzoni Date: Wed, 21 Jun 2017 13:29:12 +0000 (+0200) Subject: dt-bindings/interrupt-controller: Add DT binding for the Marvell GICP X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=11f69da0dada3e4472b5b1319fae9b1df194e3d6;p=openwrt%2Fstaging%2Fblogic.git dt-bindings/interrupt-controller: Add DT binding for the Marvell GICP This commit adds the Device Tree binding documentation for the Marvell GICP, an extension to the GIC that allows to trigger GIC SPI interrupts using memory transactions. It is used by the ICU unit in the Marvell CP110 block to turn wired interrupts inside the CP into SPI interrupts at the GIC level in the AP. Signed-off-by: Thomas Petazzoni Signed-off-by: Marc Zyngier --- diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt new file mode 100644 index 000000000000..64a00ceb7da4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt @@ -0,0 +1,27 @@ +Marvell GICP Controller +----------------------- + +GICP is a Marvell extension of the GIC that allows to trigger GIC SPI +interrupts by doing a memory transaction. It is used by the ICU +located in the Marvell CP110 to turn wired interrupts inside the CP +into GIC SPI interrupts. + +Required properties: + +- compatible: Must be "marvell,ap806-gicp" + +- reg: Must be the address and size of the GICP SPI registers + +- marvell,spi-ranges: tuples of GIC SPI interrupts ranges available + for this GICP + +- msi-controller: indicates that this is an MSI controller + +Example: + +gicp_spi: gicp-spi@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; +};