From: Oldřich Jedlička Date: Tue, 1 Jan 2019 22:11:49 +0000 (+0100) Subject: ath79: add support for TP-LINK Archer C7 v4 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=12310f05b7b080b016ec515796be437f4cd30b62;p=openwrt%2Fstaging%2Fblocktrron.git ath79: add support for TP-LINK Archer C7 v4 TP-Link Archer C7 v4 is a dual-band AC1750 router, based on the Qualcomm/Atheros QCA9561 SoC + QCA9880. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction: 1. Upload openwrt-ath79-generic-tplink_archer-c7-v4-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download openwrt-ath79-generic-tplink_archer-c7-v4-squashfs-factory.bin and rename it to ArcherC7v4_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Oldřich Jedlička --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 1c9d43edba..2f65a8948b 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -74,6 +74,7 @@ pcs,cr3000) ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02" ;; tplink,archer-a7-v5|\ +tplink,archer-c7-v4|\ tplink,archer-c7-v5) ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 6f3ef614db..ef9a782d92 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -164,6 +164,7 @@ ath79_setup_interfaces() ;; tplink,archer-a7-v5|\ tplink,archer-c6-v2|\ + tplink,archer-c7-v4|\ tplink,archer-c7-v5|\ tplink,tl-wdr3600|\ tplink,tl-wdr4300) @@ -283,6 +284,10 @@ ath79_setup_macs() wan_mac=$(mtd_get_mac_binary factory 0) lan_mac=$(macaddr_setbit_la "$wan_mac") ;; + tplink,archer-c7-v4) + base_mac=$(mtd_get_mac_binary config 8) + wan_mac=$(macaddr_add "$base_mac" 1) + ;; tplink,tl-wr1043nd-v4) base_mac=$(mtd_get_mac_binary product-info 8) wan_mac=$(macaddr_add "$base_mac" 1) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index da6c14af17..f4741fa3eb 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -135,6 +135,7 @@ case "$FIRMWARE" in ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) ;; tplink,archer-a7-v5|\ + tplink,archer-c7-v4|\ tplink,archer-c7-v5) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts b/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts new file mode 100644 index 0000000000..5a25ce3f1e --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca956x.dtsi" + +/ { + compatible = "tplink,archer-c7-v4", "qca,qca9563"; + model = "TP-Link Archer C7 v4"; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &system; + led-failsafe = &system; + led-running = &system; + led-upgrade = &system; + }; + + led_spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gpio 15 GPIO_ACTIVE_HIGH>; // 74HC595 SRCLK (Serial Clock) + gpio-mosi = <&gpio 14 GPIO_ACTIVE_HIGH>; // 74HC595 SER (Serial) + cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; // 74HC595 RCLK (Register Clock) + num-chipselects = <1>; + + led_gpio: led_gpio@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <10000000>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio_shift_register_oe { + gpio-export,name = "tp-link:oe:sr"; + gpio-export,output = <0>; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; // 74HC595 /OE (Output Enable) + }; + + gpio_shift_register_reset { + gpio-export,name = "tp-link:reset:sr"; + gpio-export,output = <1>; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; // 74HC595 /SRCLR (Serial Clear) + }; + }; + + leds { + compatible = "gpio-leds"; + + system: system { + label = "tp-link:green:system"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + usb1 { + label = "tp-link:green:usb1"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port0>; + linux,default-trigger = "usbport"; + }; + + usb2 { + label = "tp-link:green:usb2"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port1>; + linux,default-trigger = "usbport"; + }; + + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wlan2g { + label = "tp-link:green:wlan2g"; + gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wan { + label = "tp-link:green:wan"; + gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; + }; + + wan_fail { + label = "tp-link:orange:wan"; + gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "tp-link:green:lan1"; + gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "tp-link:green:lan2"; + gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; + }; + + lan3 { + label = "tp-link:green:lan3"; + gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; + }; + + lan4 { + label = "tp-link:green:lan4"; + gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "tp-link:green:wps"; + gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + wps { + label = "WPS button"; + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + +}; + +&pcie { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port0: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "factory-uboot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "u-boot"; + reg = <0x020000 0x020000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x040000 0xec0000>; + compatible = "denx,uimage"; + }; + + info: partition@f00000 { + label = "config"; + reg = <0xf00000 0x0f0000>; + read-only; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "sgmii"; + + qca,ar8327-initvals = < + 0x04 0x80080080 /* PORT0 PAD MODE CTRL */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x00000200 /* PORT6_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x03000101 0x00000101 0x00001919>; + + phy-mode = "sgmii"; + mtd-mac-address = <&info 0x8>; + phy-handle = <&phy0>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&info 0x8>; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 52a181c353..4208878210 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -75,6 +75,18 @@ define Device/tplink_archer-c7-v2 endef TARGET_DEVICES += tplink_archer-c7-v2 +define Device/tplink_archer-c7-v4 + $(Device/tplink-safeloader-uimage) + ATH_SOC := qca9563 + IMAGE_SIZE := 15104k + DEVICE_TITLE := TP-LINK Archer C7 v4 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct + TPLINK_BOARD_ID := ARCHER-C7-V4 + BOARDNAME := ARCHER-C7-V4 + SUPPORTED_DEVICES += archer-c7-v4 +endef +TARGET_DEVICES += tplink_archer-c7-v4 + define Device/tplink_archer-c7-v5 $(Device/tplink-safeloader-uimage) ATH_SOC := qca9563