From: Josua Mayer Date: Thu, 26 Dec 2019 14:25:04 +0000 (+0100) Subject: mvebu: split interface configuration for clearfog pro and base X-Git-Tag: v21.02.0-rc1~4188 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=12795ec9f16ba79cdde052f2e20f4a1bddc6235d;p=openwrt%2Fstaging%2Fchunkeey.git mvebu: split interface configuration for clearfog pro and base Handle both variants separately. This removes the need for calling swconfig to detect the switch, and simplifies future changes. Signed-off-by: Josua Mayer --- diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network index 69c63e3791..283a856258 100755 --- a/target/linux/mvebu/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/base-files/etc/board.d/02_network @@ -52,17 +52,21 @@ marvell,axp-gp) methode,udpu) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; -solidrun,clearfog*a1) +solidrun,clearfog-a1|solidrun,clearfog-pro-a1) # eth0 is standalone ethernet - # eth1 is switch (-pro) or standalone ethernet (-base) + # eth1 is switch # eth2 is SFP ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2" - # if switch exists (clearfog-pro) # switch port 5 is connected to eth1 - swconfig list 2>&1 | grep -q switch0 && \ - ucidef_add_switch "switch0" \ - "0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6" + ucidef_add_switch "switch0" \ + "0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6" + ;; +solidrun,clearfog-base-a1) + # eth0 is standalone ethernet + # eth1 is standalone ethernet + # eth2 is SFP + ucidef_set_interfaces_lan_wan "eth1" "eth0 eth2" ;; *) ucidef_set_interface_lan "eth0"