From: Jesse Barnes Date: Mon, 19 Aug 2013 18:04:55 +0000 (-0700) Subject: drm/i915: make IVB FDI training match spec v3 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=139ccd3fb12b3d17a773d2d61140f955a47fa470;p=openwrt%2Fstaging%2Fblogic.git drm/i915: make IVB FDI training match spec v3 The existing code was trying different vswing and preemphasis settings in the wrong place, and wasn't trying them enough. So add a loop to walk through them, properly disabling FDI TX and RX in between if a failure is detected. v2: remove unneeded reg writes, add delays around bit lock checks (Jesse) v3: fix TX and RX disable per spec (Paulo) fix delays per spec (Paulo) make RX symbol lock check match TX bit lock check (Paulo) Signed-off-by: Jesse Barnes Reviewed-by: Paulo Zanoni Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51983 Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e600e1cfb6ea..7a40427823c7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2597,7 +2597,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - u32 reg, temp, i; + u32 reg, temp, i, j; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ @@ -2613,97 +2613,99 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc) DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n", I915_READ(FDI_RX_IIR(pipe))); - /* enable CPU FDI TX and PCH FDI RX */ - reg = FDI_TX_CTL(pipe); - temp = I915_READ(reg); - temp &= ~FDI_DP_PORT_WIDTH_MASK; - temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); - temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB); - temp |= FDI_LINK_TRAIN_PATTERN_1_IVB; - temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; - temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; - temp |= FDI_COMPOSITE_SYNC; - I915_WRITE(reg, temp | FDI_TX_ENABLE); - - I915_WRITE(FDI_RX_MISC(pipe), - FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); - - reg = FDI_RX_CTL(pipe); - temp = I915_READ(reg); - temp &= ~FDI_LINK_TRAIN_AUTO; - temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; - temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; - temp |= FDI_COMPOSITE_SYNC; - I915_WRITE(reg, temp | FDI_RX_ENABLE); + /* Try each vswing and preemphasis setting twice before moving on */ + for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) { + /* disable first in case we need to retry */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB); + temp &= ~FDI_TX_ENABLE; + I915_WRITE(reg, temp); - POSTING_READ(reg); - udelay(150); + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_AUTO; + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp &= ~FDI_RX_ENABLE; + I915_WRITE(reg, temp); - for (i = 0; i < 4; i++) { + /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); + temp &= ~FDI_DP_PORT_WIDTH_MASK; + temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); + temp |= FDI_LINK_TRAIN_PATTERN_1_IVB; temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; - temp |= snb_b_fdi_train_param[i]; - I915_WRITE(reg, temp); + temp |= snb_b_fdi_train_param[j/2]; + temp |= FDI_COMPOSITE_SYNC; + I915_WRITE(reg, temp | FDI_TX_ENABLE); - POSTING_READ(reg); - udelay(500); + I915_WRITE(FDI_RX_MISC(pipe), + FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); - reg = FDI_RX_IIR(pipe); + reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); - DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); - - if (temp & FDI_RX_BIT_LOCK || - (I915_READ(reg) & FDI_RX_BIT_LOCK)) { - I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); - DRM_DEBUG_KMS("FDI train 1 done, level %i.\n", i); - break; - } - } - if (i == 4) - DRM_ERROR("FDI train 1 fail!\n"); + temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; + temp |= FDI_COMPOSITE_SYNC; + I915_WRITE(reg, temp | FDI_RX_ENABLE); - /* Train 2 */ - reg = FDI_TX_CTL(pipe); - temp = I915_READ(reg); - temp &= ~FDI_LINK_TRAIN_NONE_IVB; - temp |= FDI_LINK_TRAIN_PATTERN_2_IVB; - temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; - temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; - I915_WRITE(reg, temp); + POSTING_READ(reg); + udelay(1); /* should be 0.5us */ - reg = FDI_RX_CTL(pipe); - temp = I915_READ(reg); - temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; - temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; - I915_WRITE(reg, temp); + for (i = 0; i < 4; i++) { + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); + DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); - POSTING_READ(reg); - udelay(150); + if (temp & FDI_RX_BIT_LOCK || + (I915_READ(reg) & FDI_RX_BIT_LOCK)) { + I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); + DRM_DEBUG_KMS("FDI train 1 done, level %i.\n", + i); + break; + } + udelay(1); /* should be 0.5us */ + } + if (i == 4) { + DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2); + continue; + } - for (i = 0; i < 4; i++) { + /* Train 2 */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); - temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; - temp |= snb_b_fdi_train_param[i]; + temp &= ~FDI_LINK_TRAIN_NONE_IVB; + temp |= FDI_LINK_TRAIN_PATTERN_2_IVB; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; I915_WRITE(reg, temp); POSTING_READ(reg); - udelay(500); + udelay(2); /* should be 1.5us */ - reg = FDI_RX_IIR(pipe); - temp = I915_READ(reg); - DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); + for (i = 0; i < 4; i++) { + reg = FDI_RX_IIR(pipe); + temp = I915_READ(reg); + DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); - if (temp & FDI_RX_SYMBOL_LOCK) { - I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); - DRM_DEBUG_KMS("FDI train 2 done, level %i.\n", i); - break; + if (temp & FDI_RX_SYMBOL_LOCK || + (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) { + I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); + DRM_DEBUG_KMS("FDI train 2 done, level %i.\n", + i); + goto train_done; + } + udelay(2); /* should be 1.5us */ } + if (i == 4) + DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2); } - if (i == 4) - DRM_ERROR("FDI train 2 fail!\n"); +train_done: DRM_DEBUG_KMS("FDI train done.\n"); }