From: Maurizio Lombardi Date: Wed, 16 Mar 2016 13:44:08 +0000 (+0100) Subject: fnic: move printk()s outside of the critical code section. X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=14cee5b4de4b9e01438d58d1806e7eef78720405;p=openwrt%2Fstaging%2Fblogic.git fnic: move printk()s outside of the critical code section. This patch moves a printk() outside of the code section where interrupt are disabled. In some cases a flood of error messages may cause a kernel panic. It also removes one of the printk()s because the same error message was printed twice. [709686.317197] Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 12 [709686.317200] CPU: 12 PID: 1963 Comm: systemd-journal Tainted: GF O-------------- 3.10.0-229.el7.x86_64 #1 [709686.317201] Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.6.030620151309 03/06/2015 [709686.317206] ffffffff8182b2e8 00000000392722ba ffff88046fcc5c48 ffffffff81603f36 [709686.317209] ffff88046fcc5cc8 ffffffff815fd7da 0000000000000010 ffff88046fcc5cd8 [709686.317211] ffff88046fcc5c78 00000000392722ba ffff88046fcc5c88 000000000000000c [709686.317212] Call Trace: [709686.317221] [] dump_stack+0x19/0x1b [709686.317223] [] panic+0xd8/0x1e7 [709686.317227] [] ? watchdog_enable_all_cpus.part.2+0x40/0x40 [709686.317229] [] watchdog_overflow_callback+0xc2/0xd0 [709686.317233] [] __perf_event_overflow+0xa1/0x250 [709686.317235] [] perf_event_overflow+0x14/0x20 [709686.317239] [] intel_pmu_handle_irq+0x1fd/0x410 [709686.317242] [] ? unmap_kernel_range_noflush+0x11/0x20 [709686.317246] [] ? ghes_copy_tofrom_phys+0x124/0x210 [709686.317249] [] perf_event_nmi_handler+0x2b/0x50 [709686.317251] [] nmi_handle.isra.0+0x69/0xb0 [709686.317252] [] do_nmi+0xd0/0x340 [709686.317256] [] end_repeat_nmi+0x1e/0x2e [709686.317260] [] ? memcpy+0xd/0x110 [709686.317263] [] ? memcpy+0xd/0x110 [709686.317265] [] ? memcpy+0xd/0x110 [709686.317269] <> [] ? vgacon_scroll+0x2d7/0x330 [709686.317273] [] scrup+0xfc/0x110 [709686.317275] [] lf+0xa0/0xb0 [709686.317278] [] vt_console_print+0x2d2/0x420 [709686.317283] [] call_console_drivers.constprop.15+0x91/0xf0 [709686.317287] [] console_unlock+0x3bf/0x400 [709686.317291] [] vprintk_emit+0x2b6/0x530 [709686.317294] [] printk_emit+0x44/0x5b [709686.317297] [] devkmsg_writev+0x158/0x1d0 [709686.317303] [] do_sync_readv_writev+0x79/0xd0 [709686.317307] [] do_readv_writev+0xce/0x260 [709686.317310] [] ? __sb_start_write+0x58/0x110 [709686.317314] [] vfs_writev+0x35/0x60 [709686.317318] [] SyS_writev+0x5c/0xd0 [709686.317322] [] system_call_fastpath+0x16/0x1b Signed-off-by: Maurizio Lombardi Reviewed-by: Laurence Oberman Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index 266b909fe854..f3032ca5051b 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -958,23 +958,22 @@ static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, case FCPIO_INVALID_PARAM: /* some parameter in request invalid */ case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */ default: - shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n", - fnic_fcpio_status_to_str(hdr_status)); sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; break; } - if (hdr_status != FCPIO_SUCCESS) { - atomic64_inc(&fnic_stats->io_stats.io_failures); - shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n", - fnic_fcpio_status_to_str(hdr_status)); - } /* Break link with the SCSI command */ CMD_SP(sc) = NULL; CMD_FLAGS(sc) |= FNIC_IO_DONE; spin_unlock_irqrestore(io_lock, flags); + if (hdr_status != FCPIO_SUCCESS) { + atomic64_inc(&fnic_stats->io_stats.io_failures); + shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n", + fnic_fcpio_status_to_str(hdr_status)); + } + fnic_release_ioreq_buf(fnic, io_req, sc); mempool_free(io_req, fnic->io_req_pool);