From: H Hartley Sweeten Date: Wed, 24 Apr 2013 18:26:14 +0000 (-0700) Subject: staging: comedi: ni_labpc: fix build when VIRT_TO_BUS is not defined X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1581a03573e6c9ebd931e31f9172cce25dcb69e6;p=openwrt%2Fstaging%2Fblogic.git staging: comedi: ni_labpc: fix build when VIRT_TO_BUS is not defined After merging the final tree, the next-20130424 build (powerpc allyesconfig) failed like this: drivers/staging/comedi/drivers/ni_labpc.c: In function 'labpc_ai_cmd': drivers/staging/comedi/drivers/ni_labpc.c:980:9: error: implicit declaration of function 'virt_to_bus' [-Werror=implicit-function-declaration] The virt_to_bus() is only needed for the ISA DMA support in this driver. On powerpc, CONFIG_COMEDI_NI_LABPC_ISA cannot be enabled due to the depends on VIRT_TO_BUS but the PCI driver, ni_labpc_pci, can be enabled. That driver uses the ni_labpc driver for the common support code shared by the ISA, PCI, and PCMCIA boards. The ISA specific support, and the optional ISA DMA support, are currently still in the common ni_labpc driver. The ISA specific code is protected by #if IS_ENABLED(CONFIG_COMEDI_NI_LABPC_ISA) and the ISA DMA support is protected by #ifdef CONFIG_ISA_DMA_API. This allows the ISA support to be enabled on architectures that support VIRT_TO_BUS and optionally enables ISA DMA support if ISA_DMA_API is enabled. Unfortunately, the ISA DMA code uses virt_to_bus(). This results in the build failure for architectures that enable ISA_DMA_API but do not have VIRT_TO_BUS. Add a new member to the private data, dma_addr, to hold the phys_addr_t returned by virt_to_bus() and initialize it in the ISA specific labpc_attach(). For architectures that enable ISA_DMA_API but not VIRT_TO_BUS, this will fix the build error. This is also safe for architectures the enable both options but don't enable COMEDI_NI_LABPC_ISA because the dma channel (devpriv->dma_chan) is only initialized in the ISA specific labpc_attach(). Signed-off-by: H Hartley Sweeten Reported-by: Stephen Rothwell Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 3d978f34d212..77a7bb632580 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -976,8 +976,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) /* clear flip-flop to make sure 2-byte registers for * count and address get set correctly */ clear_dma_ff(devpriv->dma_chan); - set_dma_addr(devpriv->dma_chan, - virt_to_bus(devpriv->dma_buffer)); + set_dma_addr(devpriv->dma_chan, devpriv->dma_addr); /* set appropriate size of transfer */ devpriv->dma_transfer_size = labpc_suggest_transfer_size(cmd); if (cmd->stop_src == TRIG_COUNT && @@ -1089,7 +1088,7 @@ static void labpc_drain_dma(struct comedi_device *dev) devpriv->count -= num_points; /* set address and count for next transfer */ - set_dma_addr(devpriv->dma_chan, virt_to_bus(devpriv->dma_buffer)); + set_dma_addr(devpriv->dma_chan, devpriv->dma_addr); set_dma_count(devpriv->dma_chan, leftover * sample_size); release_dma_lock(flags); @@ -1741,6 +1740,9 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) unsigned long dma_flags; devpriv->dma_chan = dma_chan; + devpriv->dma_addr = + virt_to_bus(devpriv->dma_buffer); + dma_flags = claim_dma_lock(); disable_dma(devpriv->dma_chan); set_dma_mode(devpriv->dma_chan, DMA_MODE_READ); diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h index 615f16f271c0..4b691f5a9965 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.h +++ b/drivers/staging/comedi/drivers/ni_labpc.h @@ -82,6 +82,7 @@ struct labpc_private { unsigned int divisor_b1; unsigned int dma_chan; /* dma channel to use */ u16 *dma_buffer; /* buffer ai will dma into */ + phys_addr_t dma_addr; /* transfer size in bytes for current transfer */ unsigned int dma_transfer_size; /* we are using dma/fifo-half-full/etc. */