From: Bard Liao Date: Thu, 30 Apr 2015 10:18:47 +0000 (+0800) Subject: ASoC: rt5645: make volume TLV closer to reality X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=177e1e1fbc63f6e4ac0fab56dcb61bb8c8597681;p=openwrt%2Fstaging%2Fblogic.git ASoC: rt5645: make volume TLV closer to reality The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for units. Only use the resolution supported, ignoring the LSB of the volume register. This results in half the steps and 0.75dB per step, but reports accurate levels through TLV. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 605601effbd0..7996c9ceff5c 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -417,9 +417,9 @@ static bool rt5645_readable_register(struct device *dev, unsigned int reg) } static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0); -static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); +static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6525, 75, 0); static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0); -static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -1725, 75, 0); static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0); /* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */ @@ -459,9 +459,9 @@ static const struct snd_kcontrol_new rt5645_snd_controls[] = { SOC_DOUBLE("DAC2 Playback Switch", RT5645_DAC_CTRL, RT5645_M_DAC_L2_VOL_SFT, RT5645_M_DAC_R2_VOL_SFT, 1, 1), SOC_DOUBLE_TLV("DAC1 Playback Volume", RT5645_DAC1_DIG_VOL, - RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 175, 0, dac_vol_tlv), + RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 87, 0, dac_vol_tlv), SOC_DOUBLE_TLV("Mono DAC Playback Volume", RT5645_DAC2_DIG_VOL, - RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 175, 0, dac_vol_tlv), + RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 87, 0, dac_vol_tlv), /* IN1/IN2 Control */ SOC_SINGLE_TLV("IN1 Boost", RT5645_IN1_CTRL1, @@ -477,11 +477,11 @@ static const struct snd_kcontrol_new rt5645_snd_controls[] = { SOC_DOUBLE("ADC Capture Switch", RT5645_STO1_ADC_DIG_VOL, RT5645_L_MUTE_SFT, RT5645_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("ADC Capture Volume", RT5645_STO1_ADC_DIG_VOL, - RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 127, 0, adc_vol_tlv), + RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 63, 0, adc_vol_tlv), SOC_DOUBLE("Mono ADC Capture Switch", RT5645_MONO_ADC_DIG_VOL, RT5645_L_MUTE_SFT, RT5645_R_MUTE_SFT, 1, 1), SOC_DOUBLE_TLV("Mono ADC Capture Volume", RT5645_MONO_ADC_DIG_VOL, - RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 127, 0, adc_vol_tlv), + RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 63, 0, adc_vol_tlv), /* ADC Boost Volume Control */ SOC_DOUBLE_TLV("STO1 ADC Boost Gain", RT5645_ADC_BST_VOL1,