From: Yutang Jiang Date: Fri, 23 Dec 2016 17:11:32 +0000 (+0800) Subject: layerscape: add ls1088ardb device support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1866368a8ab8cacf73aa47f67138040d5620439d;p=openwrt%2Fstaging%2Fansuel.git layerscape: add ls1088ardb device support LS1088A is an ARMv8 implementation combining eight ARM A53 processor cores. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. Features summary: - Eight 64-bit ARM v8 Cortex-A53 CPUs - Data path acceleration architecture 2.0 (DPAA2) - Ethernet interfaces - QUADSPI flash, 3 PCIe, 2 USB, 1 SD, 2 DUARTs etc Signed-off-by: Yutang Jiang --- diff --git a/target/linux/layerscape/config-4.4 b/target/linux/layerscape/config-4.4 index 88da774872..d334e42fe7 100644 --- a/target/linux/layerscape/config-4.4 +++ b/target/linux/layerscape/config-4.4 @@ -169,6 +169,8 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y # CONFIG_IMX2_WDT is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_IOMMU_HELPER=y @@ -296,3 +298,14 @@ CONFIG_XPS=y CONFIG_ZLIB_INFLATE=y CONFIG_MTD_SPI_NOR=y CONFIG_SPI_FSL_QUADSPI=y +CONFIG_FSL_MC_BUS=y +CONFIG_FSL_MC_RESTOOL=y +CONFIG_FSL_MC_DPIO=y +# CONFIG_FSL_QBMAN_DEBUG is not set +CONFIG_FSL_DPAA2=y +CONFIG_FSL_DPAA2_ETH=y +# CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE is not set +CONFIG_FSL_DPAA2_MAC=y +# CONFIG_FSL_DPAA2_MAC_NETDEVS is not set +CONFIG_FSL_DPAA2_EVB=y +CONFIG_FSL_DPAA2_ETHSW=y diff --git a/target/linux/layerscape/image/Makefile b/target/linux/layerscape/image/Makefile index a06ae9e658..c70955785b 100644 --- a/target/linux/layerscape/image/Makefile +++ b/target/linux/layerscape/image/Makefile @@ -92,4 +92,18 @@ endif endef TARGET_DEVICES += ls1012ardb +define Device/ls1088ardb + DEVICE_TITLE := ls1088ardb-$(SUBTARGET) + DEVICE_PACKAGES += rcw-layerscape-ls1088ardb uboot-layerscape-$(SUBTARGET)-ls1088ardb mc-binary-ls1088ardb +ifeq ($(SUBTARGET),64b) + DEVICE_DTS = freescale/fsl-ls1088a-rdb +endif +ifeq ($(SUBTARGET),32b) + DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1088a-rdb +endif + IMAGE/firmware.bin = append-ls-dtb $$(DEVICE_DTS) | pad-to 1M | append-kernel | pad-to 6M | \ + append-ls-rootfs-ext4 $(1) 17M | check-size 24117249 +endef +TARGET_DEVICES += ls1088ardb + $(eval $(call BuildImage)) diff --git a/target/linux/layerscape/patches-4.4/3135-arm64-Add-DTS-support-for-FSL-s-LS1088ARDB.patch b/target/linux/layerscape/patches-4.4/3135-arm64-Add-DTS-support-for-FSL-s-LS1088ARDB.patch new file mode 100644 index 0000000000..c8aaeee2c8 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3135-arm64-Add-DTS-support-for-FSL-s-LS1088ARDB.patch @@ -0,0 +1,790 @@ +From cbacf87fa6fb262c98033405f15697798c3a9c5d Mon Sep 17 00:00:00 2001 +From: Zhao Qiang +Date: Sun, 9 Oct 2016 14:31:50 +0800 +Subject: [PATCH 135/141] arm64: Add DTS support for FSL's LS1088ARDB + +Signed-off-by: Zhao Qiang +--- + arch/arm64/boot/dts/freescale/Makefile | 1 + + arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 203 ++++++++ + arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 557 +++++++++++++++++++++ + 3 files changed, 761 insertions(+) + create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts + create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi + +--- a/arch/arm64/boot/dts/freescale/Makefile ++++ b/arch/arm64/boot/dts/freescale/Makefile +@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1 + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb ++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb + + always := $(dtb-y) + subdir-y := $(dts-dirs) +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +@@ -0,0 +1,203 @@ ++/* ++ * Device Tree file for Freescale LS1088a RDB board ++ * ++ * Copyright (C) 2015, Freescale Semiconductor ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++/dts-v1/; ++ ++#include "fsl-ls1088a.dtsi" ++ ++/ { ++ model = "Freescale Layerscape 1088a RDB Board"; ++ compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; ++}; ++ ++&esdhc { ++ status = "okay"; ++}; ++ ++&ifc { ++ status = "disabled"; ++}; ++ ++&ftm0 { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ pca9547@77 { ++ compatible = "philips,pca9547"; ++ reg = <0x77>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x2>; ++ ++ ina220@40 { ++ compatible = "ti,ina220"; ++ reg = <0x40>; ++ shunt-resistor = <1000>; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x3>; ++ ++ rtc@51 { ++ compatible = "nxp,pcf2129"; ++ reg = <0x51>; ++ /* IRQ10_B */ ++ interrupts = <0 150 0x4>; ++ }; ++ ++ adt7461a@4c { ++ compatible = "adt7461a"; ++ reg = <0x4c>; ++ }; ++ }; ++ }; ++}; ++ ++&i2c1 { ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ status = "disabled"; ++}; ++ ++&i2c3 { ++ status = "disabled"; ++}; ++ ++&dspi { ++ status = "disabled"; ++}; ++ ++&qspi { ++ status = "okay"; ++ qflash0: s25fs512s@0 { ++ compatible = "spansion,m25p80"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <20000000>; ++ reg = <0>; ++ }; ++ ++ qflash1: s25fs512s@1 { ++ compatible = "spansion,m25p80"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <20000000>; ++ reg = <1>; ++ }; ++}; ++ ++&sata0 { ++ status = "okay"; ++}; ++ ++&usb0 { ++ status = "okay"; ++}; ++ ++&usb1 { ++ status = "okay"; ++}; ++ ++&serial0 { ++ status = "okay"; ++}; ++ ++&serial1 { ++ status = "okay"; ++}; ++ ++&emdio1 { ++ /* Freescale F104 PHY1 */ ++ mdio1_phy1: emdio1_phy@1 { ++ reg = <0x1c>; ++ phy-connection-type = "qsgmii"; ++ }; ++ mdio1_phy2: emdio1_phy@2 { ++ reg = <0x1d>; ++ phy-connection-type = "qsgmii"; ++ }; ++ mdio1_phy3: emdio1_phy@3 { ++ reg = <0x1e>; ++ phy-connection-type = "qsgmii"; ++ }; ++ mdio1_phy4: emdio1_phy@4 { ++ reg = <0x1f>; ++ phy-connection-type = "qsgmii"; ++ }; ++ /* F104 PHY2 */ ++ mdio1_phy5: emdio1_phy@5 { ++ reg = <0x0c>; ++ phy-connection-type = "qsgmii"; ++ }; ++ mdio1_phy6: emdio1_phy@6 { ++ reg = <0x0d>; ++ phy-connection-type = "qsgmii"; ++ }; ++ mdio1_phy7: emdio1_phy@7 { ++ reg = <0x0e>; ++ phy-connection-type = "qsgmii"; ++ }; ++ mdio1_phy8: emdio1_phy@8 { ++ reg = <0x0f>; ++ phy-connection-type = "qsgmii"; ++ }; ++}; ++ ++&emdio2 { ++ /* Aquantia AQR105 10G PHY */ ++ mdio2_phy1: emdio2_phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c45"; ++ reg = <0x0>; ++ phy-connection-type = "xfi"; ++ }; ++}; ++ ++/* DPMAC connections to external PHYs ++ * based on LS1088A RM RevC - $24.1.2 SerDes Options ++ */ ++/* DPMAC1 is 10G SFP+, fixed link */ ++&dpmac2 { ++ phy-handle = <&mdio2_phy1>; ++}; ++&dpmac3 { ++ phy-handle = <&mdio1_phy5>; ++}; ++&dpmac4 { ++ phy-handle = <&mdio1_phy6>; ++}; ++&dpmac5 { ++ phy-handle = <&mdio1_phy7>; ++}; ++&dpmac6 { ++ phy-handle = <&mdio1_phy8>; ++}; ++&dpmac7 { ++ phy-handle = <&mdio1_phy1>; ++}; ++&dpmac8 { ++ phy-handle = <&mdio1_phy2>; ++}; ++&dpmac9 { ++ phy-handle = <&mdio1_phy3>; ++}; ++&dpmac10 { ++ phy-handle = <&mdio1_phy4>; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +@@ -0,0 +1,557 @@ ++/* ++ * Device Tree Include file for Freescale Layerscape-1088A family SoC. ++ * ++ * Copyright (C) 2015, Freescale Semiconductor ++ * ++ */ ++ ++/memreserve/ 0x80000000 0x00010000; ++ ++/ { ++ compatible = "fsl,ls1088a"; ++ interrupt-parent = <&gic>; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ cpus { ++ #address-cells = <2>; ++ #size-cells = <0>; ++ ++ /* We have 2 clusters having 4 Cortex-A57 cores each */ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0x0 0x0>; ++ clocks = <&clockgen 1 0>; ++ }; ++ ++ cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0x0 0x1>; ++ clocks = <&clockgen 1 0>; ++ }; ++ ++ cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0x0 0x2>; ++ clocks = <&clockgen 1 0>; ++ }; ++ ++ cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0x0 0x3>; ++ clocks = <&clockgen 1 0>; ++ }; ++ ++ cpu4: cpu@100 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0x0 0x100>; ++ clocks = <&clockgen 1 1>; ++ }; ++ ++ cpu5: cpu@101 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0x0 0x101>; ++ clocks = <&clockgen 1 1>; ++ }; ++ ++ cpu6: cpu@102 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0x0 0x102>; ++ clocks = <&clockgen 1 1>; ++ }; ++ ++ cpu7: cpu@103 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0x0 0x103>; ++ clocks = <&clockgen 1 1>; ++ }; ++ }; ++ ++ pmu { ++ compatible = "arm,armv8-pmuv3"; ++ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ ++ }; ++ ++ gic: interrupt-controller@6000000 { ++ compatible = "arm,gic-v3"; ++ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ ++ <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/ ++ <0x0 0x0c0c0000 0 0x2000>, /* GICC */ ++ <0x0 0x0c0d0000 0 0x1000>, /* GICH */ ++ <0x0 0x0c0e0000 0 0x20000>; /* GICV */ ++ #interrupt-cells = <3>; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ interrupt-controller; ++ interrupts = <1 9 0x4>; ++ ++ its: gic-its@6020000 { ++ compatible = "arm,gic-v3-its"; ++ msi-controller; ++ reg = <0x0 0x6020000 0 0x20000>; ++ }; ++ }; ++ ++ sysclk: sysclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <100000000>; ++ clock-output-names = "sysclk"; ++ }; ++ ++ clockgen: clocking@1300000 { ++ compatible = "fsl,ls2080a-clockgen", "fsl,ls1088a-clockgen"; ++ reg = <0 0x1300000 0 0xa0000>; ++ #clock-cells = <2>; ++ clocks = <&sysclk>; ++ }; ++ ++ serial0: serial@21c0500 { ++ device_type = "serial"; ++ compatible = "fsl,ns16550", "ns16550a"; ++ reg = <0x0 0x21c0500 0x0 0x100>; ++ clocks = <&clockgen 4 3>; ++ interrupts = <0 32 0x4>; /* Level high type */ ++ }; ++ ++ serial1: serial@21c0600 { ++ device_type = "serial"; ++ compatible = "fsl,ns16550", "ns16550a"; ++ reg = <0x0 0x21c0600 0x0 0x100>; ++ clocks = <&clockgen 4 3>; ++ interrupts = <0 32 0x4>; /* Level high type */ ++ }; ++ ++ gpio0: gpio@2300000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2300000 0x0 0x10000>; ++ interrupts = <0 36 0x4>; /* Level high type */ ++ gpio-controller; ++ little-endian; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio1: gpio@2310000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2310000 0x0 0x10000>; ++ interrupts = <0 36 0x4>; /* Level high type */ ++ gpio-controller; ++ little-endian; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio2: gpio@2320000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2320000 0x0 0x10000>; ++ interrupts = <0 37 0x4>; /* Level high type */ ++ gpio-controller; ++ little-endian; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio3: gpio@2330000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2330000 0x0 0x10000>; ++ interrupts = <0 37 0x4>; /* Level high type */ ++ gpio-controller; ++ little-endian; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ /* TODO: WRIOP (CCSR?) */ ++ emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */ ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8B96000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; /* force the driver in LE mode */ ++ ++ /* Not necessary on the QDS, but needed on the RDB */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */ ++ compatible = "fsl,fman-memac-mdio"; ++ reg = <0x0 0x8B97000 0x0 0x1000>; ++ device_type = "mdio"; ++ little-endian; /* force the driver in LE mode */ ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ ifc: ifc@2240000 { ++ compatible = "fsl,ifc", "simple-bus"; ++ reg = <0x0 0x2240000 0x0 0x20000>; ++ interrupts = <0 21 0x4>; /* Level high type */ ++ little-endian; ++ #address-cells = <2>; ++ #size-cells = <1>; ++ ++ ranges = <0 0 0x5 0x80000000 0x08000000 ++ 2 0 0x5 0x30000000 0x00010000 ++ 3 0 0x5 0x20000000 0x00010000>; ++ }; ++ ++ esdhc: esdhc@2140000 { ++ compatible = "fsl,ls2080a-esdhc", "fsl,ls1088a-esdhc", "fsl,esdhc"; ++ reg = <0x0 0x2140000 0x0 0x10000>; ++ interrupts = <0 28 0x4>; /* Level high type */ ++ clock-frequency = <0>; ++ voltage-ranges = <1800 1800 3300 3300>; ++ sdhci,auto-cmd12; ++ little-endian; ++ bus-width = <4>; ++ }; ++ ++ ftm0: ftm0@2800000 { ++ compatible = "fsl,ftm-alarm"; ++ reg = <0x0 0x2800000 0x0 0x10000>; ++ interrupts = <0 44 4>; ++ }; ++ ++ reset: reset@1E60000 { ++ compatible = "fsl,ls-reset"; ++ reg = <0x0 0x1E60000 0x0 0x10000>; ++ }; ++ ++ dspi: dspi@2100000 { ++ compatible = "fsl,ls2085a-dspi", "fsl,ls1088a-dspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2100000 0x0 0x10000>; ++ interrupts = <0 26 0x4>; /* Level high type */ ++ clocks = <&clockgen 4 3>; ++ clock-names = "dspi"; ++ spi-num-chipselects = <5>; ++ bus-num = <0>; ++ }; ++ ++ i2c0: i2c@2000000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2000000 0x0 0x10000>; ++ interrupts = <0 34 0x4>; /* Level high type */ ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 3>; ++ }; ++ ++ i2c1: i2c@2010000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2010000 0x0 0x10000>; ++ interrupts = <0 34 0x4>; /* Level high type */ ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 3>; ++ }; ++ ++ i2c2: i2c@2020000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2020000 0x0 0x10000>; ++ interrupts = <0 35 0x4>; /* Level high type */ ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 3>; ++ }; ++ ++ i2c3: i2c@2030000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2030000 0x0 0x10000>; ++ interrupts = <0 35 0x4>; /* Level high type */ ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 3>; ++ }; ++ ++ qspi: quadspi@20c0000 { ++ compatible = "fsl,ls2080a-qspi", "fsl,ls1088a-qspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x20c0000 0x0 0x10000>, ++ <0x0 0x20000000 0x0 0x10000000>; ++ reg-names = "QuadSPI", "QuadSPI-memory"; ++ interrupts = <0 25 0x4>; /* Level high type */ ++ clocks = <&clockgen 4 3>, <&clockgen 4 3>; ++ clock-names = "qspi_en", "qspi"; ++ }; ++ ++ pcie@3400000 { ++ compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; ++ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ ++ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ ++ reg-names = "regs", "config"; ++ interrupts = <0 108 0x4>; /* aer interrupt */ ++ interrupt-names = "aer"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ dma-coherent; ++ num-lanes = <4>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ ++ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&its>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, ++ <0000 0 0 2 &gic 0 0 0 110 4>, ++ <0000 0 0 3 &gic 0 0 0 111 4>, ++ <0000 0 0 4 &gic 0 0 0 112 4>; ++ }; ++ pcie@3500000 { ++ compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; ++ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ ++ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ ++ reg-names = "regs", "config"; ++ interrupts = <0 113 0x4>; /* aer interrupt */ ++ interrupt-names = "aer"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ dma-coherent; ++ num-lanes = <4>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ ++ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&its>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, ++ <0000 0 0 2 &gic 0 0 0 115 4>, ++ <0000 0 0 3 &gic 0 0 0 116 4>, ++ <0000 0 0 4 &gic 0 0 0 117 4>; ++ }; ++ ++ pcie@3600000 { ++ compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; ++ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ ++ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ ++ reg-names = "regs", "config"; ++ interrupts = <0 118 0x4>; /* aer interrupt */ ++ interrupt-names = "aer"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ dma-coherent; ++ num-lanes = <8>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ ++ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&its>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, ++ <0000 0 0 2 &gic 0 0 0 120 4>, ++ <0000 0 0 3 &gic 0 0 0 121 4>, ++ <0000 0 0 4 &gic 0 0 0 122 4>; ++ }; ++ ++ sata0: sata@3200000 { ++ compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci"; ++ reg = <0x0 0x3200000 0x0 0x10000>; ++ interrupts = <0 133 0x4>; /* Level high type */ ++ clocks = <&clockgen 4 3>; ++ }; ++ ++ usb0: usb3@3100000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3100000 0x0 0x10000>; ++ interrupts = <0 80 0x4>; /* Level high type */ ++ dr_mode = "host"; ++ configure-gfladj; ++ snps,dis_rxdet_inp3_quirk; ++ }; ++ ++ usb1: usb3@3110000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x3110000 0x0 0x10000>; ++ interrupts = <0 81 0x4>; /* Level high type */ ++ dr_mode = "host"; ++ configure-gfladj; ++ snps,dis_rxdet_inp3_quirk; ++ }; ++ ++ smmu: iommu@5000000 { ++ compatible = "arm,mmu-500"; ++ reg = <0 0x5000000 0 0x800000>; ++ #global-interrupts = <12>; ++ interrupts = <0 13 4>, /* global secure fault */ ++ <0 14 4>, /* combined secure interrupt */ ++ <0 15 4>, /* global non-secure fault */ ++ <0 16 4>, /* combined non-secure interrupt */ ++ /* performance counter interrupts 0-7 */ ++ <0 211 4>, ++ <0 212 4>, ++ <0 213 4>, ++ <0 214 4>, ++ <0 215 4>, ++ <0 216 4>, ++ <0 217 4>, ++ <0 218 4>, ++ /* per context interrupt, 64 interrupts */ ++ <0 146 4>, ++ <0 147 4>, ++ <0 148 4>, ++ <0 149 4>, ++ <0 150 4>, ++ <0 151 4>, ++ <0 152 4>, ++ <0 153 4>, ++ <0 154 4>, ++ <0 155 4>, ++ <0 156 4>, ++ <0 157 4>, ++ <0 158 4>, ++ <0 159 4>, ++ <0 160 4>, ++ <0 161 4>, ++ <0 162 4>, ++ <0 163 4>, ++ <0 164 4>, ++ <0 165 4>, ++ <0 166 4>, ++ <0 167 4>, ++ <0 168 4>, ++ <0 169 4>, ++ <0 170 4>, ++ <0 171 4>, ++ <0 172 4>, ++ <0 173 4>, ++ <0 174 4>, ++ <0 175 4>, ++ <0 176 4>, ++ <0 177 4>, ++ <0 178 4>, ++ <0 179 4>, ++ <0 180 4>, ++ <0 181 4>, ++ <0 182 4>, ++ <0 183 4>, ++ <0 184 4>, ++ <0 185 4>, ++ <0 186 4>, ++ <0 187 4>, ++ <0 188 4>, ++ <0 189 4>, ++ <0 190 4>, ++ <0 191 4>, ++ <0 192 4>, ++ <0 193 4>, ++ <0 194 4>, ++ <0 195 4>, ++ <0 196 4>, ++ <0 197 4>, ++ <0 198 4>, ++ <0 199 4>, ++ <0 200 4>, ++ <0 201 4>, ++ <0 202 4>, ++ <0 203 4>, ++ <0 204 4>, ++ <0 205 4>, ++ <0 206 4>, ++ <0 207 4>, ++ <0 208 4>, ++ <0 209 4>; ++ mmu-masters = <&fsl_mc 0x300 0>; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = <1 13 0x1>,/*Phy Secure PPI, edge triggered*/ ++ <1 14 0x1>, /*Phy Non-Secure PPI, edge triggered*/ ++ <1 11 0x1>, /*Virtual PPI, edge triggered */ ++ <1 10 0x1>; /*Hypervisor PPI, edge triggered */ ++ }; ++ ++ fsl_mc: fsl-mc@80c000000 { ++ compatible = "fsl,qoriq-mc"; ++ #stream-id-cells = <2>; ++ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ ++ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ ++ msi-parent = <&its>; ++ #address-cells = <3>; ++ #size-cells = <1>; ++ ++ /* ++ * Region type 0x0 - MC portals ++ * Region type 0x1 - QBMAN portals ++ */ ++ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 ++ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; ++ ++ dpmacs { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ dpmac1: dpmac@1 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <1>; ++ }; ++ dpmac2: dpmac@2 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <2>; ++ }; ++ dpmac3: dpmac@3 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <3>; ++ }; ++ dpmac4: dpmac@4 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <4>; ++ }; ++ dpmac5: dpmac@5 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <5>; ++ }; ++ dpmac6: dpmac@6 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <6>; ++ }; ++ dpmac7: dpmac@7 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <7>; ++ }; ++ dpmac8: dpmac@8 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <8>; ++ }; ++ dpmac9: dpmac@9 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <9>; ++ }; ++ dpmac10: dpmac@10 { ++ compatible = "fsl,qoriq-mc-dpmac"; ++ reg = <0xa>; ++ }; ++ }; ++ }; ++ ++ ++ memory@80000000 { ++ device_type = "memory"; ++ reg = <0x00000000 0x80000000 0 0x80000000>; ++ /* DRAM space 1 - 2 GB DRAM */ ++ }; ++}; diff --git a/target/linux/layerscape/patches-4.4/3139-ls1088ardb-add-ITS-file.patch b/target/linux/layerscape/patches-4.4/3139-ls1088ardb-add-ITS-file.patch new file mode 100644 index 0000000000..8b66c3e57a --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3139-ls1088ardb-add-ITS-file.patch @@ -0,0 +1,69 @@ +From caaab508dc2ba749d8394b5934353b1c47f37d75 Mon Sep 17 00:00:00 2001 +From: Zhao Qiang +Date: Sun, 9 Oct 2016 15:14:16 +0800 +Subject: [PATCH 139/141] ls1088ardb: add ITS file + +Signed-off-by: Zhao Qiang +--- + kernel-ls1088a-rdb.its | 55 ++++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 55 insertions(+) + create mode 100644 kernel-ls1088a-rdb.its + +--- /dev/null ++++ b/kernel-ls1088a-rdb.its +@@ -0,0 +1,55 @@ ++/* ++ * Copyright (C) 2015, Freescale Semiconductor ++ * ++ * Raghav Dogra ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++/dts-v1/; ++ ++/ { ++ description = "Simulator Image file for the LS1088A Linux Kernel"; ++ #address-cells = <1>; ++ ++ images { ++ kernel@1 { ++ description = "ARM64 Linux kernel"; ++ data = /incbin/("./arch/arm64/boot/Image.gz"); ++ type = "kernel"; ++ arch = "arm64"; ++ os = "linux"; ++ compression = "gzip"; ++ load = <0x80080000>; ++ entry = <0x80080000>; ++ }; ++ fdt@1 { ++ description = "Flattened Device Tree blob"; ++ data = /incbin/("./arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dtb"); ++ type = "flat_dt"; ++ arch = "arm64"; ++ compression = "none"; ++ load = <0x90000000>; ++ }; ++ ramdisk@1 { ++ description = "LS2 Ramdisk"; ++ data = /incbin/("./fsl-image-core-ls1088ardb-be.ext2.gz"); ++ type = "ramdisk"; ++ arch = "arm64"; ++ os = "linux"; ++ compression = "none"; ++ }; ++ }; ++ ++ configurations { ++ default = "config@1"; ++ config@1 { ++ description = "Boot Linux kernel"; ++ kernel = "kernel@1"; ++ fdt = "fdt@1"; ++ ramdisk = "ramdisk@1"; ++ }; ++ }; ++}; diff --git a/target/linux/layerscape/patches-4.4/3141-caam-add-caam-node-for-ls1088a.patch b/target/linux/layerscape/patches-4.4/3141-caam-add-caam-node-for-ls1088a.patch new file mode 100644 index 0000000000..386a32102a --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3141-caam-add-caam-node-for-ls1088a.patch @@ -0,0 +1,62 @@ +From 89b3b66aa955fed15585a4ba7120cf63f9e92aba Mon Sep 17 00:00:00 2001 +From: Zhao Qiang +Date: Thu, 13 Oct 2016 10:19:08 +0800 +Subject: [PATCH 141/141] caam: add caam node for ls1088a + +Signed-off-by: Zhao Qiang +--- + arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 43 ++++++++++++++++++++++++ + 1 file changed, 43 insertions(+) + +--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +@@ -485,6 +485,49 @@ + <1 10 0x1>; /*Hypervisor PPI, edge triggered */ + }; + ++ crypto: crypto@8000000 { ++ compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", ++ "fsl,sec-v4.0"; ++ fsl,sec-era = <8>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x00 0x8000000 0x100000>; ++ reg = <0x00 0x8000000 0x0 0x100000>; ++ interrupts = <0 139 0x4>; ++ ++ sec_jr0: jr@10000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x10000 0x10000>; ++ interrupts = <0 140 0x4>; ++ }; ++ ++ sec_jr1: jr@20000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x20000 0x10000>; ++ interrupts = <0 141 0x4>; ++ }; ++ ++ sec_jr2: jr@30000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x30000 0x10000>; ++ interrupts = <0 142 0x4>; ++ }; ++ ++ sec_jr3: jr@40000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x40000 0x10000>; ++ interrupts = <0 143 0x4>; ++ }; ++ }; ++ + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + #stream-id-cells = <2>; diff --git a/target/linux/layerscape/patches-4.4/3226-mtd-spi-nor-fsl-quadspi-Enable-fast-read-for-LS1088A.patch b/target/linux/layerscape/patches-4.4/3226-mtd-spi-nor-fsl-quadspi-Enable-fast-read-for-LS1088A.patch new file mode 100644 index 0000000000..29f887a84e --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3226-mtd-spi-nor-fsl-quadspi-Enable-fast-read-for-LS1088A.patch @@ -0,0 +1,44 @@ +From 72b250c04f543d4eeda06b32e699444b15cac5cc Mon Sep 17 00:00:00 2001 +From: "ying.zhang" +Date: Sat, 17 Dec 2016 00:39:28 +0800 +Subject: [PATCH 226/226] mtd:spi-nor:fsl-quadspi:Enable fast-read for + LS1088ARDB + +Add fast-read mode for LS1088ARDB board. + +Signed-off-by: Yuan Yao +Integrated-by: Jiang Yutang +--- + arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 2 ++ + arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 1 + + 2 files changed, 3 insertions(+) + +--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +@@ -91,6 +91,7 @@ + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; ++ m25p,fast-read; + spi-max-frequency = <20000000>; + reg = <0>; + }; +@@ -99,6 +100,7 @@ + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; ++ m25p,fast-read; + spi-max-frequency = <20000000>; + reg = <1>; + }; +--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +@@ -294,6 +294,7 @@ + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "qspi_en", "qspi"; ++ fsl,qspi-has-second-chip; + }; + + pcie@3400000 { + diff --git a/target/linux/layerscape/patches-4.4/7144-dpaa-call-arch_setup_dma_ops-before-using-dma_ops.patch b/target/linux/layerscape/patches-4.4/7144-dpaa-call-arch_setup_dma_ops-before-using-dma_ops.patch new file mode 100644 index 0000000000..ef8cf01b47 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7144-dpaa-call-arch_setup_dma_ops-before-using-dma_ops.patch @@ -0,0 +1,53 @@ +From 0ac69de37277aec31d18a8c7b9d9a3a65b629526 Mon Sep 17 00:00:00 2001 +From: Yangbo Lu +Date: Wed, 12 Oct 2016 16:30:57 +0800 +Subject: [PATCH 144/226] dpaa: call arch_setup_dma_ops before using dma_ops + +A previous patch caused dpaa call trace. This patch provides +a temporary workaround for this until this is fixed by upstream. + +Fixes: 1dccb598df54 ("arm64: simplify dma_get_ops") +Signed-off-by: Yangbo Lu +--- + .../ethernet/freescale/sdk_dpaa/dpaa_eth_common.c | 12 ++++++------ + drivers/staging/fsl_qbman/qman_high.c | 1 + + 2 files changed, 7 insertions(+), 6 deletions(-) + +--- a/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c ++++ b/drivers/net/ethernet/freescale/sdk_dpaa/dpaa_eth_common.c +@@ -754,6 +754,12 @@ dpa_bp_alloc(struct dpa_bp *dpa_bp) + goto pdev_register_failed; + } + ++#ifdef CONFIG_FMAN_ARM ++ /* force coherency */ ++ pdev->dev.archdata.dma_coherent = true; ++ arch_setup_dma_ops(&pdev->dev, 0, 0, NULL, true); ++#endif ++ + err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(40)); + if (err) + goto pdev_mask_failed; +@@ -765,12 +771,6 @@ dpa_bp_alloc(struct dpa_bp *dpa_bp) + goto pdev_mask_failed; + } + +-#ifdef CONFIG_FMAN_ARM +- /* force coherency */ +- pdev->dev.archdata.dma_coherent = true; +- arch_setup_dma_ops(&pdev->dev, 0, 0, NULL, true); +-#endif +- + dpa_bp->dev = &pdev->dev; + + if (dpa_bp->seed_cb) { +--- a/drivers/staging/fsl_qbman/qman_high.c ++++ b/drivers/staging/fsl_qbman/qman_high.c +@@ -662,6 +662,7 @@ struct qman_portal *qman_create_portal( + portal->pdev->dev.coherent_dma_mask = DMA_BIT_MASK(40); + portal->pdev->dev.dma_mask = &portal->pdev->dev.coherent_dma_mask; + #else ++ arch_setup_dma_ops(&portal->pdev->dev, 0, 0, NULL, false); + if (dma_set_mask(&portal->pdev->dev, DMA_BIT_MASK(40))) { + pr_err("qman_portal - dma_set_mask() failed\n"); + goto fail_devadd; diff --git a/target/linux/layerscape/patches-4.4/7145-staging-fsl-mc-Added-generic-MSI-support-for-FSL-MC-.patch b/target/linux/layerscape/patches-4.4/7145-staging-fsl-mc-Added-generic-MSI-support-for-FSL-MC-.patch new file mode 100644 index 0000000000..1f3a9f0506 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7145-staging-fsl-mc-Added-generic-MSI-support-for-FSL-MC-.patch @@ -0,0 +1,400 @@ +From 8ebb892cd56d14e72580ab36c3b5eb2d4603a7fe Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:21 -0600 +Subject: [PATCH 145/226] staging: fsl-mc: Added generic MSI support for + FSL-MC devices + +Created an MSI domain for the fsl-mc bus-- including functions +to create a domain, find a domain, alloc/free domain irqs, and +bus specific overrides for domain and irq_chip ops. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/Kconfig | 1 + + drivers/staging/fsl-mc/bus/Makefile | 1 + + drivers/staging/fsl-mc/bus/mc-msi.c | 276 +++++++++++++++++++++++++++ + drivers/staging/fsl-mc/include/dprc.h | 2 +- + drivers/staging/fsl-mc/include/mc-private.h | 17 ++ + drivers/staging/fsl-mc/include/mc.h | 17 ++ + 6 files changed, 313 insertions(+), 1 deletion(-) + create mode 100644 drivers/staging/fsl-mc/bus/mc-msi.c + +--- a/drivers/staging/fsl-mc/bus/Kconfig ++++ b/drivers/staging/fsl-mc/bus/Kconfig +@@ -9,6 +9,7 @@ + config FSL_MC_BUS + tristate "Freescale Management Complex (MC) bus driver" + depends on OF && ARM64 ++ select GENERIC_MSI_IRQ_DOMAIN + help + Driver to enable the bus infrastructure for the Freescale + QorIQ Management Complex (fsl-mc). The fsl-mc is a hardware +--- a/drivers/staging/fsl-mc/bus/Makefile ++++ b/drivers/staging/fsl-mc/bus/Makefile +@@ -13,5 +13,6 @@ mc-bus-driver-objs := mc-bus.o \ + dpmng.o \ + dprc-driver.o \ + mc-allocator.o \ ++ mc-msi.o \ + dpmcp.o \ + dpbp.o +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/mc-msi.c +@@ -0,0 +1,276 @@ ++/* ++ * Freescale Management Complex (MC) bus driver MSI support ++ * ++ * Copyright (C) 2015 Freescale Semiconductor, Inc. ++ * Author: German Rivera ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#include "../include/mc-private.h" ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "../include/mc-sys.h" ++#include "dprc-cmd.h" ++ ++static void fsl_mc_msi_set_desc(msi_alloc_info_t *arg, ++ struct msi_desc *desc) ++{ ++ arg->desc = desc; ++ arg->hwirq = (irq_hw_number_t)desc->fsl_mc.msi_index; ++} ++ ++static void fsl_mc_msi_update_dom_ops(struct msi_domain_info *info) ++{ ++ struct msi_domain_ops *ops = info->ops; ++ ++ if (WARN_ON(!ops)) ++ return; ++ ++ /* ++ * set_desc should not be set by the caller ++ */ ++ if (WARN_ON(ops->set_desc)) ++ return; ++ ++ ops->set_desc = fsl_mc_msi_set_desc; ++} ++ ++static void __fsl_mc_msi_write_msg(struct fsl_mc_device *mc_bus_dev, ++ struct fsl_mc_device_irq *mc_dev_irq) ++{ ++ int error; ++ struct fsl_mc_device *owner_mc_dev = mc_dev_irq->mc_dev; ++ struct msi_desc *msi_desc = mc_dev_irq->msi_desc; ++ struct dprc_irq_cfg irq_cfg; ++ ++ /* ++ * msi_desc->msg.address is 0x0 when this function is invoked in ++ * the free_irq() code path. In this case, for the MC, we don't ++ * really need to "unprogram" the MSI, so we just return. ++ */ ++ if (msi_desc->msg.address_lo == 0x0 && msi_desc->msg.address_hi == 0x0) ++ return; ++ ++ if (WARN_ON(!owner_mc_dev)) ++ return; ++ ++ irq_cfg.paddr = ((u64)msi_desc->msg.address_hi << 32) | ++ msi_desc->msg.address_lo; ++ irq_cfg.val = msi_desc->msg.data; ++ irq_cfg.user_irq_id = msi_desc->irq; ++ ++ if (owner_mc_dev == mc_bus_dev) { ++ /* ++ * IRQ is for the mc_bus_dev's DPRC itself ++ */ ++ error = dprc_set_irq(mc_bus_dev->mc_io, ++ MC_CMD_FLAG_INTR_DIS | MC_CMD_FLAG_PRI, ++ mc_bus_dev->mc_handle, ++ mc_dev_irq->dev_irq_index, ++ &irq_cfg); ++ if (error < 0) { ++ dev_err(&owner_mc_dev->dev, ++ "dprc_set_irq() failed: %d\n", error); ++ } ++ } else { ++ /* ++ * IRQ is for for a child device of mc_bus_dev ++ */ ++ error = dprc_set_obj_irq(mc_bus_dev->mc_io, ++ MC_CMD_FLAG_INTR_DIS | MC_CMD_FLAG_PRI, ++ mc_bus_dev->mc_handle, ++ owner_mc_dev->obj_desc.type, ++ owner_mc_dev->obj_desc.id, ++ mc_dev_irq->dev_irq_index, ++ &irq_cfg); ++ if (error < 0) { ++ dev_err(&owner_mc_dev->dev, ++ "dprc_obj_set_irq() failed: %d\n", error); ++ } ++ } ++} ++ ++/* ++ * NOTE: This function is invoked with interrupts disabled ++ */ ++static void fsl_mc_msi_write_msg(struct irq_data *irq_data, ++ struct msi_msg *msg) ++{ ++ struct msi_desc *msi_desc = irq_data_get_msi_desc(irq_data); ++ struct fsl_mc_device *mc_bus_dev = to_fsl_mc_device(msi_desc->dev); ++ struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_bus_dev); ++ struct fsl_mc_device_irq *mc_dev_irq = ++ &mc_bus->irq_resources[msi_desc->fsl_mc.msi_index]; ++ ++ WARN_ON(mc_dev_irq->msi_desc != msi_desc); ++ msi_desc->msg = *msg; ++ ++ /* ++ * Program the MSI (paddr, value) pair in the device: ++ */ ++ __fsl_mc_msi_write_msg(mc_bus_dev, mc_dev_irq); ++} ++ ++static void fsl_mc_msi_update_chip_ops(struct msi_domain_info *info) ++{ ++ struct irq_chip *chip = info->chip; ++ ++ if (WARN_ON((!chip))) ++ return; ++ ++ /* ++ * irq_write_msi_msg should not be set by the caller ++ */ ++ if (WARN_ON(chip->irq_write_msi_msg)) ++ return; ++ ++ chip->irq_write_msi_msg = fsl_mc_msi_write_msg; ++} ++ ++/** ++ * fsl_mc_msi_create_irq_domain - Create a fsl-mc MSI interrupt domain ++ * @np: Optional device-tree node of the interrupt controller ++ * @info: MSI domain info ++ * @parent: Parent irq domain ++ * ++ * Updates the domain and chip ops and creates a fsl-mc MSI ++ * interrupt domain. ++ * ++ * Returns: ++ * A domain pointer or NULL in case of failure. ++ */ ++struct irq_domain *fsl_mc_msi_create_irq_domain(struct fwnode_handle *fwnode, ++ struct msi_domain_info *info, ++ struct irq_domain *parent) ++{ ++ struct irq_domain *domain; ++ ++ if (info->flags & MSI_FLAG_USE_DEF_DOM_OPS) ++ fsl_mc_msi_update_dom_ops(info); ++ if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS) ++ fsl_mc_msi_update_chip_ops(info); ++ ++ domain = msi_create_irq_domain(fwnode, info, parent); ++ if (domain) ++ domain->bus_token = DOMAIN_BUS_FSL_MC_MSI; ++ ++ return domain; ++} ++ ++int fsl_mc_find_msi_domain(struct device *mc_platform_dev, ++ struct irq_domain **mc_msi_domain) ++{ ++ struct irq_domain *msi_domain; ++ struct device_node *mc_of_node = mc_platform_dev->of_node; ++ ++ msi_domain = of_msi_get_domain(mc_platform_dev, mc_of_node, ++ DOMAIN_BUS_FSL_MC_MSI); ++ if (!msi_domain) { ++ pr_err("Unable to find fsl-mc MSI domain for %s\n", ++ mc_of_node->full_name); ++ ++ return -ENOENT; ++ } ++ ++ *mc_msi_domain = msi_domain; ++ return 0; ++} ++ ++static void fsl_mc_msi_free_descs(struct device *dev) ++{ ++ struct msi_desc *desc, *tmp; ++ ++ list_for_each_entry_safe(desc, tmp, dev_to_msi_list(dev), list) { ++ list_del(&desc->list); ++ free_msi_entry(desc); ++ } ++} ++ ++static int fsl_mc_msi_alloc_descs(struct device *dev, unsigned int irq_count) ++ ++{ ++ unsigned int i; ++ int error; ++ struct msi_desc *msi_desc; ++ ++ for (i = 0; i < irq_count; i++) { ++ msi_desc = alloc_msi_entry(dev); ++ if (!msi_desc) { ++ dev_err(dev, "Failed to allocate msi entry\n"); ++ error = -ENOMEM; ++ goto cleanup_msi_descs; ++ } ++ ++ msi_desc->fsl_mc.msi_index = i; ++ msi_desc->nvec_used = 1; ++ INIT_LIST_HEAD(&msi_desc->list); ++ list_add_tail(&msi_desc->list, dev_to_msi_list(dev)); ++ } ++ ++ return 0; ++ ++cleanup_msi_descs: ++ fsl_mc_msi_free_descs(dev); ++ return error; ++} ++ ++int fsl_mc_msi_domain_alloc_irqs(struct device *dev, ++ unsigned int irq_count) ++{ ++ struct irq_domain *msi_domain; ++ int error; ++ ++ if (WARN_ON(!list_empty(dev_to_msi_list(dev)))) ++ return -EINVAL; ++ ++ error = fsl_mc_msi_alloc_descs(dev, irq_count); ++ if (error < 0) ++ return error; ++ ++ msi_domain = dev_get_msi_domain(dev); ++ if (WARN_ON(!msi_domain)) { ++ error = -EINVAL; ++ goto cleanup_msi_descs; ++ } ++ ++ /* ++ * NOTE: Calling this function will trigger the invocation of the ++ * its_fsl_mc_msi_prepare() callback ++ */ ++ error = msi_domain_alloc_irqs(msi_domain, dev, irq_count); ++ ++ if (error) { ++ dev_err(dev, "Failed to allocate IRQs\n"); ++ goto cleanup_msi_descs; ++ } ++ ++ return 0; ++ ++cleanup_msi_descs: ++ fsl_mc_msi_free_descs(dev); ++ return error; ++} ++ ++void fsl_mc_msi_domain_free_irqs(struct device *dev) ++{ ++ struct irq_domain *msi_domain; ++ ++ msi_domain = dev_get_msi_domain(dev); ++ if (WARN_ON(!msi_domain)) ++ return; ++ ++ msi_domain_free_irqs(msi_domain, dev); ++ ++ if (WARN_ON(list_empty(dev_to_msi_list(dev)))) ++ return; ++ ++ fsl_mc_msi_free_descs(dev); ++} +--- a/drivers/staging/fsl-mc/include/dprc.h ++++ b/drivers/staging/fsl-mc/include/dprc.h +@@ -176,7 +176,7 @@ int dprc_reset_container(struct fsl_mc_i + * @user_irq_id: A user defined number associated with this IRQ + */ + struct dprc_irq_cfg { +- u64 paddr; ++ phys_addr_t paddr; + u32 val; + int user_irq_id; + }; +--- a/drivers/staging/fsl-mc/include/mc-private.h ++++ b/drivers/staging/fsl-mc/include/mc-private.h +@@ -26,6 +26,9 @@ + strcmp(_obj_type, "dpmcp") == 0 || \ + strcmp(_obj_type, "dpcon") == 0) + ++struct irq_domain; ++struct msi_domain_info; ++ + /** + * struct fsl_mc - Private data of a "fsl,qoriq-mc" platform device + * @root_mc_bus_dev: MC object device representing the root DPRC +@@ -79,11 +82,13 @@ struct fsl_mc_resource_pool { + * @resource_pools: array of resource pools (one pool per resource type) + * for this MC bus. These resources represent allocatable entities + * from the physical DPRC. ++ * @irq_resources: Pointer to array of IRQ objects for the IRQ pool + * @scan_mutex: Serializes bus scanning + */ + struct fsl_mc_bus { + struct fsl_mc_device mc_dev; + struct fsl_mc_resource_pool resource_pools[FSL_MC_NUM_POOL_TYPES]; ++ struct fsl_mc_device_irq *irq_resources; + struct mutex scan_mutex; /* serializes bus scanning */ + }; + +@@ -116,4 +121,16 @@ int __must_check fsl_mc_resource_allocat + + void fsl_mc_resource_free(struct fsl_mc_resource *resource); + ++struct irq_domain *fsl_mc_msi_create_irq_domain(struct fwnode_handle *fwnode, ++ struct msi_domain_info *info, ++ struct irq_domain *parent); ++ ++int fsl_mc_find_msi_domain(struct device *mc_platform_dev, ++ struct irq_domain **mc_msi_domain); ++ ++int fsl_mc_msi_domain_alloc_irqs(struct device *dev, ++ unsigned int irq_count); ++ ++void fsl_mc_msi_domain_free_irqs(struct device *dev); ++ + #endif /* _FSL_MC_PRIVATE_H_ */ +--- a/drivers/staging/fsl-mc/include/mc.h ++++ b/drivers/staging/fsl-mc/include/mc.h +@@ -104,6 +104,23 @@ struct fsl_mc_resource { + }; + + /** ++ * struct fsl_mc_device_irq - MC object device message-based interrupt ++ * @msi_desc: pointer to MSI descriptor allocated by fsl_mc_msi_alloc_descs() ++ * @mc_dev: MC object device that owns this interrupt ++ * @dev_irq_index: device-relative IRQ index ++ * @resource: MC generic resource associated with the interrupt ++ */ ++struct fsl_mc_device_irq { ++ struct msi_desc *msi_desc; ++ struct fsl_mc_device *mc_dev; ++ u8 dev_irq_index; ++ struct fsl_mc_resource resource; ++}; ++ ++#define to_fsl_mc_irq(_mc_resource) \ ++ container_of(_mc_resource, struct fsl_mc_device_irq, resource) ++ ++/** + * Bit masks for a MC object device (struct fsl_mc_device) flags + */ + #define FSL_MC_IS_DPRC 0x0001 diff --git a/target/linux/layerscape/patches-4.4/7146-staging-fsl-mc-Added-GICv3-ITS-support-for-FSL-MC-MS.patch b/target/linux/layerscape/patches-4.4/7146-staging-fsl-mc-Added-GICv3-ITS-support-for-FSL-MC-MS.patch new file mode 100644 index 0000000000..5b254d70d2 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7146-staging-fsl-mc-Added-GICv3-ITS-support-for-FSL-MC-MS.patch @@ -0,0 +1,167 @@ +From 85cb8ae26b6c69f0a118f32b7b7cd4f22d782da3 Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:22 -0600 +Subject: [PATCH 146/226] staging: fsl-mc: Added GICv3-ITS support for FSL-MC + MSIs + +Added platform-specific MSI support layer for FSL-MC devices. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/Makefile | 1 + + .../staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c | 127 ++++++++++++++++++++ + drivers/staging/fsl-mc/include/mc-private.h | 4 + + 3 files changed, 132 insertions(+) + create mode 100644 drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c + +--- a/drivers/staging/fsl-mc/bus/Makefile ++++ b/drivers/staging/fsl-mc/bus/Makefile +@@ -14,5 +14,6 @@ mc-bus-driver-objs := mc-bus.o \ + dprc-driver.o \ + mc-allocator.o \ + mc-msi.o \ ++ irq-gic-v3-its-fsl-mc-msi.o \ + dpmcp.o \ + dpbp.o +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c +@@ -0,0 +1,127 @@ ++/* ++ * Freescale Management Complex (MC) bus driver MSI support ++ * ++ * Copyright (C) 2015 Freescale Semiconductor, Inc. ++ * Author: German Rivera ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#include "../include/mc-private.h" ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "../include/mc-sys.h" ++#include "dprc-cmd.h" ++ ++static struct irq_chip its_msi_irq_chip = { ++ .name = "fsl-mc-bus-msi", ++ .irq_mask = irq_chip_mask_parent, ++ .irq_unmask = irq_chip_unmask_parent, ++ .irq_eoi = irq_chip_eoi_parent, ++ .irq_set_affinity = msi_domain_set_affinity ++}; ++ ++static int its_fsl_mc_msi_prepare(struct irq_domain *msi_domain, ++ struct device *dev, ++ int nvec, msi_alloc_info_t *info) ++{ ++ struct fsl_mc_device *mc_bus_dev; ++ struct msi_domain_info *msi_info; ++ ++ if (WARN_ON(dev->bus != &fsl_mc_bus_type)) ++ return -EINVAL; ++ ++ mc_bus_dev = to_fsl_mc_device(dev); ++ if (WARN_ON(!(mc_bus_dev->flags & FSL_MC_IS_DPRC))) ++ return -EINVAL; ++ ++ /* ++ * Set the device Id to be passed to the GIC-ITS: ++ * ++ * NOTE: This device id corresponds to the IOMMU stream ID ++ * associated with the DPRC object (ICID). ++ */ ++ info->scratchpad[0].ul = mc_bus_dev->icid; ++ msi_info = msi_get_domain_info(msi_domain->parent); ++ return msi_info->ops->msi_prepare(msi_domain->parent, dev, nvec, info); ++} ++ ++static struct msi_domain_ops its_fsl_mc_msi_ops = { ++ .msi_prepare = its_fsl_mc_msi_prepare, ++}; ++ ++static struct msi_domain_info its_fsl_mc_msi_domain_info = { ++ .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS), ++ .ops = &its_fsl_mc_msi_ops, ++ .chip = &its_msi_irq_chip, ++}; ++ ++static const struct of_device_id its_device_id[] = { ++ { .compatible = "arm,gic-v3-its", }, ++ {}, ++}; ++ ++int __init its_fsl_mc_msi_init(void) ++{ ++ struct device_node *np; ++ struct irq_domain *parent; ++ struct irq_domain *mc_msi_domain; ++ ++ for (np = of_find_matching_node(NULL, its_device_id); np; ++ np = of_find_matching_node(np, its_device_id)) { ++ if (!of_property_read_bool(np, "msi-controller")) ++ continue; ++ ++ parent = irq_find_matching_host(np, DOMAIN_BUS_NEXUS); ++ if (!parent || !msi_get_domain_info(parent)) { ++ pr_err("%s: unable to locate ITS domain\n", ++ np->full_name); ++ continue; ++ } ++ ++ mc_msi_domain = fsl_mc_msi_create_irq_domain( ++ of_node_to_fwnode(np), ++ &its_fsl_mc_msi_domain_info, ++ parent); ++ if (!mc_msi_domain) { ++ pr_err("%s: unable to create fsl-mc domain\n", ++ np->full_name); ++ continue; ++ } ++ ++ WARN_ON(mc_msi_domain-> ++ host_data != &its_fsl_mc_msi_domain_info); ++ ++ pr_info("fsl-mc MSI: %s domain created\n", np->full_name); ++ } ++ ++ return 0; ++} ++ ++void its_fsl_mc_msi_cleanup(void) ++{ ++ struct device_node *np; ++ ++ for (np = of_find_matching_node(NULL, its_device_id); np; ++ np = of_find_matching_node(np, its_device_id)) { ++ struct irq_domain *mc_msi_domain = irq_find_matching_host( ++ np, ++ DOMAIN_BUS_FSL_MC_MSI); ++ ++ if (!of_property_read_bool(np, "msi-controller")) ++ continue; ++ ++ mc_msi_domain = irq_find_matching_host(np, ++ DOMAIN_BUS_FSL_MC_MSI); ++ if (mc_msi_domain && ++ mc_msi_domain->host_data == &its_fsl_mc_msi_domain_info) ++ irq_domain_remove(mc_msi_domain); ++ } ++} +--- a/drivers/staging/fsl-mc/include/mc-private.h ++++ b/drivers/staging/fsl-mc/include/mc-private.h +@@ -133,4 +133,8 @@ int fsl_mc_msi_domain_alloc_irqs(struct + + void fsl_mc_msi_domain_free_irqs(struct device *dev); + ++int __init its_fsl_mc_msi_init(void); ++ ++void its_fsl_mc_msi_cleanup(void); ++ + #endif /* _FSL_MC_PRIVATE_H_ */ diff --git a/target/linux/layerscape/patches-4.4/7147-staging-fsl-mc-Extended-MC-bus-allocator-to-include-.patch b/target/linux/layerscape/patches-4.4/7147-staging-fsl-mc-Extended-MC-bus-allocator-to-include-.patch new file mode 100644 index 0000000000..c02c892b21 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7147-staging-fsl-mc-Extended-MC-bus-allocator-to-include-.patch @@ -0,0 +1,326 @@ +From 23b09c6b4162a8264b600f35d7048256a7afc0cd Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:23 -0600 +Subject: [PATCH 147/226] staging: fsl-mc: Extended MC bus allocator to + include IRQs + +All the IRQs for DPAA2 objects in the same DPRC must use +the ICID of that DPRC, as their device Id in the GIC-ITS. +Thus, all these IRQs must share the same ITT table in the GIC. +As a result, a pool of IRQs with the same device Id must be +preallocated per DPRC (fsl-mc bus instance). So, the fsl-mc +bus object allocator is extended to also provide services +to allocate IRQs to DPAA2 devices, from their parent fsl-mc bus +IRQ pool. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-allocator.c | 199 +++++++++++++++++++++++++++ + drivers/staging/fsl-mc/include/mc-private.h | 15 ++ + drivers/staging/fsl-mc/include/mc.h | 9 ++ + 3 files changed, 223 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/mc-allocator.c ++++ b/drivers/staging/fsl-mc/bus/mc-allocator.c +@@ -15,6 +15,7 @@ + #include "../include/dpcon-cmd.h" + #include "dpmcp-cmd.h" + #include "dpmcp.h" ++#include + + /** + * fsl_mc_resource_pool_add_device - add allocatable device to a resource +@@ -160,6 +161,7 @@ static const char *const fsl_mc_pool_typ + [FSL_MC_POOL_DPMCP] = "dpmcp", + [FSL_MC_POOL_DPBP] = "dpbp", + [FSL_MC_POOL_DPCON] = "dpcon", ++ [FSL_MC_POOL_IRQ] = "irq", + }; + + static int __must_check object_type_to_pool_type(const char *object_type, +@@ -465,6 +467,203 @@ void fsl_mc_object_free(struct fsl_mc_de + } + EXPORT_SYMBOL_GPL(fsl_mc_object_free); + ++/* ++ * Initialize the interrupt pool associated with a MC bus. ++ * It allocates a block of IRQs from the GIC-ITS ++ */ ++int fsl_mc_populate_irq_pool(struct fsl_mc_bus *mc_bus, ++ unsigned int irq_count) ++{ ++ unsigned int i; ++ struct msi_desc *msi_desc; ++ struct fsl_mc_device_irq *irq_resources; ++ struct fsl_mc_device_irq *mc_dev_irq; ++ int error; ++ struct fsl_mc_device *mc_bus_dev = &mc_bus->mc_dev; ++ struct fsl_mc_resource_pool *res_pool = ++ &mc_bus->resource_pools[FSL_MC_POOL_IRQ]; ++ ++ if (WARN_ON(irq_count == 0 || ++ irq_count > FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS)) ++ return -EINVAL; ++ ++ error = fsl_mc_msi_domain_alloc_irqs(&mc_bus_dev->dev, irq_count); ++ if (error < 0) ++ return error; ++ ++ irq_resources = devm_kzalloc(&mc_bus_dev->dev, ++ sizeof(*irq_resources) * irq_count, ++ GFP_KERNEL); ++ if (!irq_resources) { ++ error = -ENOMEM; ++ goto cleanup_msi_irqs; ++ } ++ ++ for (i = 0; i < irq_count; i++) { ++ mc_dev_irq = &irq_resources[i]; ++ ++ /* ++ * NOTE: This mc_dev_irq's MSI addr/value pair will be set ++ * by the fsl_mc_msi_write_msg() callback ++ */ ++ mc_dev_irq->resource.type = res_pool->type; ++ mc_dev_irq->resource.data = mc_dev_irq; ++ mc_dev_irq->resource.parent_pool = res_pool; ++ INIT_LIST_HEAD(&mc_dev_irq->resource.node); ++ list_add_tail(&mc_dev_irq->resource.node, &res_pool->free_list); ++ } ++ ++ for_each_msi_entry(msi_desc, &mc_bus_dev->dev) { ++ mc_dev_irq = &irq_resources[msi_desc->fsl_mc.msi_index]; ++ mc_dev_irq->msi_desc = msi_desc; ++ mc_dev_irq->resource.id = msi_desc->irq; ++ } ++ ++ res_pool->max_count = irq_count; ++ res_pool->free_count = irq_count; ++ mc_bus->irq_resources = irq_resources; ++ return 0; ++ ++cleanup_msi_irqs: ++ fsl_mc_msi_domain_free_irqs(&mc_bus_dev->dev); ++ return error; ++} ++EXPORT_SYMBOL_GPL(fsl_mc_populate_irq_pool); ++ ++/** ++ * Teardown the interrupt pool associated with an MC bus. ++ * It frees the IRQs that were allocated to the pool, back to the GIC-ITS. ++ */ ++void fsl_mc_cleanup_irq_pool(struct fsl_mc_bus *mc_bus) ++{ ++ struct fsl_mc_device *mc_bus_dev = &mc_bus->mc_dev; ++ struct fsl_mc_resource_pool *res_pool = ++ &mc_bus->resource_pools[FSL_MC_POOL_IRQ]; ++ ++ if (WARN_ON(!mc_bus->irq_resources)) ++ return; ++ ++ if (WARN_ON(res_pool->max_count == 0)) ++ return; ++ ++ if (WARN_ON(res_pool->free_count != res_pool->max_count)) ++ return; ++ ++ INIT_LIST_HEAD(&res_pool->free_list); ++ res_pool->max_count = 0; ++ res_pool->free_count = 0; ++ mc_bus->irq_resources = NULL; ++ fsl_mc_msi_domain_free_irqs(&mc_bus_dev->dev); ++} ++EXPORT_SYMBOL_GPL(fsl_mc_cleanup_irq_pool); ++ ++/** ++ * It allocates the IRQs required by a given MC object device. The ++ * IRQs are allocated from the interrupt pool associated with the ++ * MC bus that contains the device, if the device is not a DPRC device. ++ * Otherwise, the IRQs are allocated from the interrupt pool associated ++ * with the MC bus that represents the DPRC device itself. ++ */ ++int __must_check fsl_mc_allocate_irqs(struct fsl_mc_device *mc_dev) ++{ ++ int i; ++ int irq_count; ++ int res_allocated_count = 0; ++ int error = -EINVAL; ++ struct fsl_mc_device_irq **irqs = NULL; ++ struct fsl_mc_bus *mc_bus; ++ struct fsl_mc_resource_pool *res_pool; ++ ++ if (WARN_ON(mc_dev->irqs)) ++ return -EINVAL; ++ ++ irq_count = mc_dev->obj_desc.irq_count; ++ if (WARN_ON(irq_count == 0)) ++ return -EINVAL; ++ ++ if (strcmp(mc_dev->obj_desc.type, "dprc") == 0) ++ mc_bus = to_fsl_mc_bus(mc_dev); ++ else ++ mc_bus = to_fsl_mc_bus(to_fsl_mc_device(mc_dev->dev.parent)); ++ ++ if (WARN_ON(!mc_bus->irq_resources)) ++ return -EINVAL; ++ ++ res_pool = &mc_bus->resource_pools[FSL_MC_POOL_IRQ]; ++ if (res_pool->free_count < irq_count) { ++ dev_err(&mc_dev->dev, ++ "Not able to allocate %u irqs for device\n", irq_count); ++ return -ENOSPC; ++ } ++ ++ irqs = devm_kzalloc(&mc_dev->dev, irq_count * sizeof(irqs[0]), ++ GFP_KERNEL); ++ if (!irqs) ++ return -ENOMEM; ++ ++ for (i = 0; i < irq_count; i++) { ++ struct fsl_mc_resource *resource; ++ ++ error = fsl_mc_resource_allocate(mc_bus, FSL_MC_POOL_IRQ, ++ &resource); ++ if (error < 0) ++ goto error_resource_alloc; ++ ++ irqs[i] = to_fsl_mc_irq(resource); ++ res_allocated_count++; ++ ++ WARN_ON(irqs[i]->mc_dev); ++ irqs[i]->mc_dev = mc_dev; ++ irqs[i]->dev_irq_index = i; ++ } ++ ++ mc_dev->irqs = irqs; ++ return 0; ++ ++error_resource_alloc: ++ for (i = 0; i < res_allocated_count; i++) { ++ irqs[i]->mc_dev = NULL; ++ fsl_mc_resource_free(&irqs[i]->resource); ++ } ++ ++ return error; ++} ++EXPORT_SYMBOL_GPL(fsl_mc_allocate_irqs); ++ ++/* ++ * It frees the IRQs that were allocated for a MC object device, by ++ * returning them to the corresponding interrupt pool. ++ */ ++void fsl_mc_free_irqs(struct fsl_mc_device *mc_dev) ++{ ++ int i; ++ int irq_count; ++ struct fsl_mc_bus *mc_bus; ++ struct fsl_mc_device_irq **irqs = mc_dev->irqs; ++ ++ if (WARN_ON(!irqs)) ++ return; ++ ++ irq_count = mc_dev->obj_desc.irq_count; ++ ++ if (strcmp(mc_dev->obj_desc.type, "dprc") == 0) ++ mc_bus = to_fsl_mc_bus(mc_dev); ++ else ++ mc_bus = to_fsl_mc_bus(to_fsl_mc_device(mc_dev->dev.parent)); ++ ++ if (WARN_ON(!mc_bus->irq_resources)) ++ return; ++ ++ for (i = 0; i < irq_count; i++) { ++ WARN_ON(!irqs[i]->mc_dev); ++ irqs[i]->mc_dev = NULL; ++ fsl_mc_resource_free(&irqs[i]->resource); ++ } ++ ++ mc_dev->irqs = NULL; ++} ++EXPORT_SYMBOL_GPL(fsl_mc_free_irqs); ++ + /** + * fsl_mc_allocator_probe - callback invoked when an allocatable device is + * being added to the system +--- a/drivers/staging/fsl-mc/include/mc-private.h ++++ b/drivers/staging/fsl-mc/include/mc-private.h +@@ -30,6 +30,16 @@ struct irq_domain; + struct msi_domain_info; + + /** ++ * Maximum number of total IRQs that can be pre-allocated for an MC bus' ++ * IRQ pool ++ */ ++#define FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS 256 ++ ++struct device_node; ++struct irq_domain; ++struct msi_domain_info; ++ ++/** + * struct fsl_mc - Private data of a "fsl,qoriq-mc" platform device + * @root_mc_bus_dev: MC object device representing the root DPRC + * @num_translation_ranges: number of entries in addr_translation_ranges +@@ -137,4 +147,9 @@ int __init its_fsl_mc_msi_init(void); + + void its_fsl_mc_msi_cleanup(void); + ++int fsl_mc_populate_irq_pool(struct fsl_mc_bus *mc_bus, ++ unsigned int irq_count); ++ ++void fsl_mc_cleanup_irq_pool(struct fsl_mc_bus *mc_bus); ++ + #endif /* _FSL_MC_PRIVATE_H_ */ +--- a/drivers/staging/fsl-mc/include/mc.h ++++ b/drivers/staging/fsl-mc/include/mc.h +@@ -14,12 +14,14 @@ + #include + #include + #include ++#include + #include "../include/dprc.h" + + #define FSL_MC_VENDOR_FREESCALE 0x1957 + + struct fsl_mc_device; + struct fsl_mc_io; ++struct fsl_mc_bus; + + /** + * struct fsl_mc_driver - MC object device driver object +@@ -75,6 +77,7 @@ enum fsl_mc_pool_type { + FSL_MC_POOL_DPMCP = 0x0, /* corresponds to "dpmcp" in the MC */ + FSL_MC_POOL_DPBP, /* corresponds to "dpbp" in the MC */ + FSL_MC_POOL_DPCON, /* corresponds to "dpcon" in the MC */ ++ FSL_MC_POOL_IRQ, + + /* + * NOTE: New resource pool types must be added before this entry +@@ -141,6 +144,7 @@ struct fsl_mc_device_irq { + * NULL if none. + * @obj_desc: MC description of the DPAA device + * @regions: pointer to array of MMIO region entries ++ * @irqs: pointer to array of pointers to interrupts allocated to this device + * @resource: generic resource associated with this MC object device, if any. + * + * Generic device object for MC object devices that are "attached" to a +@@ -172,6 +176,7 @@ struct fsl_mc_device { + struct fsl_mc_io *mc_io; + struct dprc_obj_desc obj_desc; + struct resource *regions; ++ struct fsl_mc_device_irq **irqs; + struct fsl_mc_resource *resource; + }; + +@@ -215,6 +220,10 @@ int __must_check fsl_mc_object_allocate( + + void fsl_mc_object_free(struct fsl_mc_device *mc_adev); + ++int __must_check fsl_mc_allocate_irqs(struct fsl_mc_device *mc_dev); ++ ++void fsl_mc_free_irqs(struct fsl_mc_device *mc_dev); ++ + extern struct bus_type fsl_mc_bus_type; + + #endif /* _FSL_MC_H_ */ diff --git a/target/linux/layerscape/patches-4.4/7148-staging-fsl-mc-Changed-DPRC-built-in-portal-s-mc_io-.patch b/target/linux/layerscape/patches-4.4/7148-staging-fsl-mc-Changed-DPRC-built-in-portal-s-mc_io-.patch new file mode 100644 index 0000000000..17dcb75897 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7148-staging-fsl-mc-Changed-DPRC-built-in-portal-s-mc_io-.patch @@ -0,0 +1,44 @@ +From 0f2a65dea2024b7898e3c0b42e0a7864d6538567 Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:24 -0600 +Subject: [PATCH 148/226] staging: fsl-mc: Changed DPRC built-in portal's + mc_io to be atomic + +The DPRC built-in portal's mc_io is used to send commands to the MC +to program MSIs for MC objects. This is done by the +fsl_mc_msi_write_msg() callback, which is invoked by the generic MSI +layer with interrupts disabled. As a result, the mc_io used in +fsl_mc_msi_write_msg needs to be an atomic mc_io. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 4 +++- + drivers/staging/fsl-mc/bus/mc-bus.c | 3 ++- + 2 files changed, 5 insertions(+), 2 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -396,7 +396,9 @@ static int dprc_probe(struct fsl_mc_devi + error = fsl_create_mc_io(&mc_dev->dev, + mc_dev->regions[0].start, + region_size, +- NULL, 0, &mc_dev->mc_io); ++ NULL, ++ FSL_MC_IO_ATOMIC_CONTEXT_PORTAL, ++ &mc_dev->mc_io); + if (error < 0) + return error; + } +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -702,7 +702,8 @@ static int fsl_mc_bus_probe(struct platf + mc_portal_phys_addr = res.start; + mc_portal_size = resource_size(&res); + error = fsl_create_mc_io(&pdev->dev, mc_portal_phys_addr, +- mc_portal_size, NULL, 0, &mc_io); ++ mc_portal_size, NULL, ++ FSL_MC_IO_ATOMIC_CONTEXT_PORTAL, &mc_io); + if (error < 0) + return error; + diff --git a/target/linux/layerscape/patches-4.4/7149-staging-fsl-mc-Populate-the-IRQ-pool-for-an-MC-bus-i.patch b/target/linux/layerscape/patches-4.4/7149-staging-fsl-mc-Populate-the-IRQ-pool-for-an-MC-bus-i.patch new file mode 100644 index 0000000000..e72d5a7ef7 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7149-staging-fsl-mc-Populate-the-IRQ-pool-for-an-MC-bus-i.patch @@ -0,0 +1,109 @@ +From 78ab7589777526022757e9c95b9d5864786eb4e5 Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:25 -0600 +Subject: [PATCH 149/226] staging: fsl-mc: Populate the IRQ pool for an MC bus + instance + +Scan the corresponding DPRC container to get total count +of IRQs needed by all its child DPAA2 objects. Then, +preallocate a set of MSI IRQs with the DPRC's ICID +(GIT-ITS device Id) to populate the the DPRC's IRQ pool. +Each child DPAA2 object in the DPRC and the DPRC object itself +will allocate their necessary MSI IRQs from the DPRC's IRQ pool, +in their driver probe function. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 24 ++++++++++++++++++++++-- + drivers/staging/fsl-mc/include/mc-private.h | 3 ++- + 2 files changed, 24 insertions(+), 3 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -241,6 +241,7 @@ static void dprc_cleanup_all_resource_po + * dprc_scan_objects - Discover objects in a DPRC + * + * @mc_bus_dev: pointer to the fsl-mc device that represents a DPRC object ++ * @total_irq_count: total number of IRQs needed by objects in the DPRC. + * + * Detects objects added and removed from a DPRC and synchronizes the + * state of the Linux bus driver, MC by adding and removing +@@ -254,11 +255,13 @@ static void dprc_cleanup_all_resource_po + * populated before they can get allocation requests from probe callbacks + * of the device drivers for the non-allocatable devices. + */ +-int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev) ++int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev, ++ unsigned int *total_irq_count) + { + int num_child_objects; + int dprc_get_obj_failures; + int error; ++ unsigned int irq_count = mc_bus_dev->obj_desc.irq_count; + struct dprc_obj_desc *child_obj_desc_array = NULL; + + error = dprc_get_obj_count(mc_bus_dev->mc_io, +@@ -307,6 +310,7 @@ int dprc_scan_objects(struct fsl_mc_devi + continue; + } + ++ irq_count += obj_desc->irq_count; + dev_dbg(&mc_bus_dev->dev, + "Discovered object: type %s, id %d\n", + obj_desc->type, obj_desc->id); +@@ -319,6 +323,7 @@ int dprc_scan_objects(struct fsl_mc_devi + } + } + ++ *total_irq_count = irq_count; + dprc_remove_devices(mc_bus_dev, child_obj_desc_array, + num_child_objects); + +@@ -344,6 +349,7 @@ EXPORT_SYMBOL_GPL(dprc_scan_objects); + int dprc_scan_container(struct fsl_mc_device *mc_bus_dev) + { + int error; ++ unsigned int irq_count; + struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_bus_dev); + + dprc_init_all_resource_pools(mc_bus_dev); +@@ -352,11 +358,25 @@ int dprc_scan_container(struct fsl_mc_de + * Discover objects in the DPRC: + */ + mutex_lock(&mc_bus->scan_mutex); +- error = dprc_scan_objects(mc_bus_dev); ++ error = dprc_scan_objects(mc_bus_dev, &irq_count); + mutex_unlock(&mc_bus->scan_mutex); + if (error < 0) + goto error; + ++ if (dev_get_msi_domain(&mc_bus_dev->dev) && !mc_bus->irq_resources) { ++ if (irq_count > FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS) { ++ dev_warn(&mc_bus_dev->dev, ++ "IRQs needed (%u) exceed IRQs preallocated (%u)\n", ++ irq_count, FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS); ++ } ++ ++ error = fsl_mc_populate_irq_pool( ++ mc_bus, ++ FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS); ++ if (error < 0) ++ goto error; ++ } ++ + return 0; + error: + dprc_cleanup_all_resource_pools(mc_bus_dev); +--- a/drivers/staging/fsl-mc/include/mc-private.h ++++ b/drivers/staging/fsl-mc/include/mc-private.h +@@ -114,7 +114,8 @@ void fsl_mc_device_remove(struct fsl_mc_ + + int dprc_scan_container(struct fsl_mc_device *mc_bus_dev); + +-int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev); ++int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev, ++ unsigned int *total_irq_count); + + int __init dprc_driver_init(void); + diff --git a/target/linux/layerscape/patches-4.4/7150-staging-fsl-mc-set-MSI-domain-for-DPRC-objects.patch b/target/linux/layerscape/patches-4.4/7150-staging-fsl-mc-set-MSI-domain-for-DPRC-objects.patch new file mode 100644 index 0000000000..0c69783ad9 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7150-staging-fsl-mc-set-MSI-domain-for-DPRC-objects.patch @@ -0,0 +1,103 @@ +From 15bfab2641c61fb50a876860e8909ab84d2b8701 Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:26 -0600 +Subject: [PATCH 150/226] staging: fsl-mc: set MSI domain for DPRC objects + +THE MSI domain associated with a root DPRC object is +obtained form the device tree. Child DPRCs inherit +the parent DPRC MSI domain. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 39 ++++++++++++++++++++++++++++++ + 1 file changed, 39 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -13,6 +13,7 @@ + #include "../include/mc-sys.h" + #include + #include ++#include + #include "dprc-cmd.h" + + struct dprc_child_objs { +@@ -398,11 +399,16 @@ static int dprc_probe(struct fsl_mc_devi + { + int error; + size_t region_size; ++ struct device *parent_dev = mc_dev->dev.parent; + struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_dev); ++ bool msi_domain_set = false; + + if (WARN_ON(strcmp(mc_dev->obj_desc.type, "dprc") != 0)) + return -EINVAL; + ++ if (WARN_ON(dev_get_msi_domain(&mc_dev->dev))) ++ return -EINVAL; ++ + if (!mc_dev->mc_io) { + /* + * This is a child DPRC: +@@ -421,6 +427,30 @@ static int dprc_probe(struct fsl_mc_devi + &mc_dev->mc_io); + if (error < 0) + return error; ++ /* ++ * Inherit parent MSI domain: ++ */ ++ dev_set_msi_domain(&mc_dev->dev, ++ dev_get_msi_domain(parent_dev)); ++ msi_domain_set = true; ++ } else { ++ /* ++ * This is a root DPRC ++ */ ++ struct irq_domain *mc_msi_domain; ++ ++ if (WARN_ON(parent_dev->bus == &fsl_mc_bus_type)) ++ return -EINVAL; ++ ++ error = fsl_mc_find_msi_domain(parent_dev, ++ &mc_msi_domain); ++ if (error < 0) { ++ dev_warn(&mc_dev->dev, ++ "WARNING: MC bus without interrupt support\n"); ++ } else { ++ dev_set_msi_domain(&mc_dev->dev, mc_msi_domain); ++ msi_domain_set = true; ++ } + } + + error = dprc_open(mc_dev->mc_io, 0, mc_dev->obj_desc.id, +@@ -446,6 +476,9 @@ error_cleanup_open: + (void)dprc_close(mc_dev->mc_io, 0, mc_dev->mc_handle); + + error_cleanup_mc_io: ++ if (msi_domain_set) ++ dev_set_msi_domain(&mc_dev->dev, NULL); ++ + fsl_destroy_mc_io(mc_dev->mc_io); + return error; + } +@@ -463,6 +496,7 @@ error_cleanup_mc_io: + static int dprc_remove(struct fsl_mc_device *mc_dev) + { + int error; ++ struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_dev); + + if (WARN_ON(strcmp(mc_dev->obj_desc.type, "dprc") != 0)) + return -EINVAL; +@@ -475,6 +509,11 @@ static int dprc_remove(struct fsl_mc_dev + if (error < 0) + dev_err(&mc_dev->dev, "dprc_close() failed: %d\n", error); + ++ if (dev_get_msi_domain(&mc_dev->dev)) { ++ fsl_mc_cleanup_irq_pool(mc_bus); ++ dev_set_msi_domain(&mc_dev->dev, NULL); ++ } ++ + dev_info(&mc_dev->dev, "DPRC device unbound from driver"); + return 0; + } diff --git a/target/linux/layerscape/patches-4.4/7151-staging-fsl-mc-Fixed-bug-in-dprc_probe-error-path.patch b/target/linux/layerscape/patches-4.4/7151-staging-fsl-mc-Fixed-bug-in-dprc_probe-error-path.patch new file mode 100644 index 0000000000..3324048a06 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7151-staging-fsl-mc-Fixed-bug-in-dprc_probe-error-path.patch @@ -0,0 +1,72 @@ +From 22aa842ae501ea8724afd45fcb0d7b17a67cb950 Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:27 -0600 +Subject: [PATCH 151/226] staging: fsl-mc: Fixed bug in dprc_probe() error + path + +Destroy mc_io in error path in dprc_probe() only if the mc_io was +created in this function. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 17 ++++++++++++++--- + 1 file changed, 14 insertions(+), 3 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -401,6 +401,7 @@ static int dprc_probe(struct fsl_mc_devi + size_t region_size; + struct device *parent_dev = mc_dev->dev.parent; + struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_dev); ++ bool mc_io_created = false; + bool msi_domain_set = false; + + if (WARN_ON(strcmp(mc_dev->obj_desc.type, "dprc") != 0)) +@@ -413,6 +414,9 @@ static int dprc_probe(struct fsl_mc_devi + /* + * This is a child DPRC: + */ ++ if (WARN_ON(parent_dev->bus != &fsl_mc_bus_type)) ++ return -EINVAL; ++ + if (WARN_ON(mc_dev->obj_desc.region_count == 0)) + return -EINVAL; + +@@ -427,6 +431,9 @@ static int dprc_probe(struct fsl_mc_devi + &mc_dev->mc_io); + if (error < 0) + return error; ++ ++ mc_io_created = true; ++ + /* + * Inherit parent MSI domain: + */ +@@ -457,7 +464,7 @@ static int dprc_probe(struct fsl_mc_devi + &mc_dev->mc_handle); + if (error < 0) { + dev_err(&mc_dev->dev, "dprc_open() failed: %d\n", error); +- goto error_cleanup_mc_io; ++ goto error_cleanup_msi_domain; + } + + mutex_init(&mc_bus->scan_mutex); +@@ -475,11 +482,15 @@ static int dprc_probe(struct fsl_mc_devi + error_cleanup_open: + (void)dprc_close(mc_dev->mc_io, 0, mc_dev->mc_handle); + +-error_cleanup_mc_io: ++error_cleanup_msi_domain: + if (msi_domain_set) + dev_set_msi_domain(&mc_dev->dev, NULL); + +- fsl_destroy_mc_io(mc_dev->mc_io); ++ if (mc_io_created) { ++ fsl_destroy_mc_io(mc_dev->mc_io); ++ mc_dev->mc_io = NULL; ++ } ++ + return error; + } + diff --git a/target/linux/layerscape/patches-4.4/7152-staging-fsl-mc-Added-DPRC-interrupt-handler.patch b/target/linux/layerscape/patches-4.4/7152-staging-fsl-mc-Added-DPRC-interrupt-handler.patch new file mode 100644 index 0000000000..61b7ee71e1 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7152-staging-fsl-mc-Added-DPRC-interrupt-handler.patch @@ -0,0 +1,301 @@ +From aa83997b14c31b34d9af24cb42726b55fa630464 Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:28 -0600 +Subject: [PATCH 152/226] staging: fsl-mc: Added DPRC interrupt handler + +The interrupt handler for DPRC IRQs is added. DPRC IRQs are +generated for hot plug events related to DPAA2 objects in a given +DPRC. These events include, creating/destroying DPAA2 objects in +the DPRC, changing the "plugged" state of DPAA2 objects and moving +objects between DPRCs. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 247 ++++++++++++++++++++++++++++++ + 1 file changed, 247 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + #include "dprc-cmd.h" + + struct dprc_child_objs { +@@ -386,6 +387,230 @@ error: + EXPORT_SYMBOL_GPL(dprc_scan_container); + + /** ++ * dprc_irq0_handler - Regular ISR for DPRC interrupt 0 ++ * ++ * @irq: IRQ number of the interrupt being handled ++ * @arg: Pointer to device structure ++ */ ++static irqreturn_t dprc_irq0_handler(int irq_num, void *arg) ++{ ++ return IRQ_WAKE_THREAD; ++} ++ ++/** ++ * dprc_irq0_handler_thread - Handler thread function for DPRC interrupt 0 ++ * ++ * @irq: IRQ number of the interrupt being handled ++ * @arg: Pointer to device structure ++ */ ++static irqreturn_t dprc_irq0_handler_thread(int irq_num, void *arg) ++{ ++ int error; ++ u32 status; ++ struct device *dev = (struct device *)arg; ++ struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); ++ struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_dev); ++ struct fsl_mc_io *mc_io = mc_dev->mc_io; ++ struct msi_desc *msi_desc = mc_dev->irqs[0]->msi_desc; ++ ++ dev_dbg(dev, "DPRC IRQ %d triggered on CPU %u\n", ++ irq_num, smp_processor_id()); ++ ++ if (WARN_ON(!(mc_dev->flags & FSL_MC_IS_DPRC))) ++ return IRQ_HANDLED; ++ ++ mutex_lock(&mc_bus->scan_mutex); ++ if (WARN_ON(!msi_desc || msi_desc->irq != (u32)irq_num)) ++ goto out; ++ ++ error = dprc_get_irq_status(mc_io, 0, mc_dev->mc_handle, 0, ++ &status); ++ if (error < 0) { ++ dev_err(dev, ++ "dprc_get_irq_status() failed: %d\n", error); ++ goto out; ++ } ++ ++ error = dprc_clear_irq_status(mc_io, 0, mc_dev->mc_handle, 0, ++ status); ++ if (error < 0) { ++ dev_err(dev, ++ "dprc_clear_irq_status() failed: %d\n", error); ++ goto out; ++ } ++ ++ if (status & (DPRC_IRQ_EVENT_OBJ_ADDED | ++ DPRC_IRQ_EVENT_OBJ_REMOVED | ++ DPRC_IRQ_EVENT_CONTAINER_DESTROYED | ++ DPRC_IRQ_EVENT_OBJ_DESTROYED | ++ DPRC_IRQ_EVENT_OBJ_CREATED)) { ++ unsigned int irq_count; ++ ++ error = dprc_scan_objects(mc_dev, &irq_count); ++ if (error < 0) { ++ /* ++ * If the error is -ENXIO, we ignore it, as it indicates ++ * that the object scan was aborted, as we detected that ++ * an object was removed from the DPRC in the MC, while ++ * we were scanning the DPRC. ++ */ ++ if (error != -ENXIO) { ++ dev_err(dev, "dprc_scan_objects() failed: %d\n", ++ error); ++ } ++ ++ goto out; ++ } ++ ++ if (irq_count > FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS) { ++ dev_warn(dev, ++ "IRQs needed (%u) exceed IRQs preallocated (%u)\n", ++ irq_count, FSL_MC_IRQ_POOL_MAX_TOTAL_IRQS); ++ } ++ } ++ ++out: ++ mutex_unlock(&mc_bus->scan_mutex); ++ return IRQ_HANDLED; ++} ++ ++/* ++ * Disable and clear interrupt for a given DPRC object ++ */ ++static int disable_dprc_irq(struct fsl_mc_device *mc_dev) ++{ ++ int error; ++ struct fsl_mc_io *mc_io = mc_dev->mc_io; ++ ++ WARN_ON(mc_dev->obj_desc.irq_count != 1); ++ ++ /* ++ * Disable generation of interrupt, while we configure it: ++ */ ++ error = dprc_set_irq_enable(mc_io, 0, mc_dev->mc_handle, 0, 0); ++ if (error < 0) { ++ dev_err(&mc_dev->dev, ++ "Disabling DPRC IRQ failed: dprc_set_irq_enable() failed: %d\n", ++ error); ++ return error; ++ } ++ ++ /* ++ * Disable all interrupt causes for the interrupt: ++ */ ++ error = dprc_set_irq_mask(mc_io, 0, mc_dev->mc_handle, 0, 0x0); ++ if (error < 0) { ++ dev_err(&mc_dev->dev, ++ "Disabling DPRC IRQ failed: dprc_set_irq_mask() failed: %d\n", ++ error); ++ return error; ++ } ++ ++ /* ++ * Clear any leftover interrupts: ++ */ ++ error = dprc_clear_irq_status(mc_io, 0, mc_dev->mc_handle, 0, ~0x0U); ++ if (error < 0) { ++ dev_err(&mc_dev->dev, ++ "Disabling DPRC IRQ failed: dprc_clear_irq_status() failed: %d\n", ++ error); ++ return error; ++ } ++ ++ return 0; ++} ++ ++static int register_dprc_irq_handler(struct fsl_mc_device *mc_dev) ++{ ++ int error; ++ struct fsl_mc_device_irq *irq = mc_dev->irqs[0]; ++ ++ WARN_ON(mc_dev->obj_desc.irq_count != 1); ++ ++ /* ++ * NOTE: devm_request_threaded_irq() invokes the device-specific ++ * function that programs the MSI physically in the device ++ */ ++ error = devm_request_threaded_irq(&mc_dev->dev, ++ irq->msi_desc->irq, ++ dprc_irq0_handler, ++ dprc_irq0_handler_thread, ++ IRQF_NO_SUSPEND | IRQF_ONESHOT, ++ "FSL MC DPRC irq0", ++ &mc_dev->dev); ++ if (error < 0) { ++ dev_err(&mc_dev->dev, ++ "devm_request_threaded_irq() failed: %d\n", ++ error); ++ return error; ++ } ++ ++ return 0; ++} ++ ++static int enable_dprc_irq(struct fsl_mc_device *mc_dev) ++{ ++ int error; ++ ++ /* ++ * Enable all interrupt causes for the interrupt: ++ */ ++ error = dprc_set_irq_mask(mc_dev->mc_io, 0, mc_dev->mc_handle, 0, ++ ~0x0u); ++ if (error < 0) { ++ dev_err(&mc_dev->dev, ++ "Enabling DPRC IRQ failed: dprc_set_irq_mask() failed: %d\n", ++ error); ++ ++ return error; ++ } ++ ++ /* ++ * Enable generation of the interrupt: ++ */ ++ error = dprc_set_irq_enable(mc_dev->mc_io, 0, mc_dev->mc_handle, 0, 1); ++ if (error < 0) { ++ dev_err(&mc_dev->dev, ++ "Enabling DPRC IRQ failed: dprc_set_irq_enable() failed: %d\n", ++ error); ++ ++ return error; ++ } ++ ++ return 0; ++} ++ ++/* ++ * Setup interrupt for a given DPRC device ++ */ ++static int dprc_setup_irq(struct fsl_mc_device *mc_dev) ++{ ++ int error; ++ ++ error = fsl_mc_allocate_irqs(mc_dev); ++ if (error < 0) ++ return error; ++ ++ error = disable_dprc_irq(mc_dev); ++ if (error < 0) ++ goto error_free_irqs; ++ ++ error = register_dprc_irq_handler(mc_dev); ++ if (error < 0) ++ goto error_free_irqs; ++ ++ error = enable_dprc_irq(mc_dev); ++ if (error < 0) ++ goto error_free_irqs; ++ ++ return 0; ++ ++error_free_irqs: ++ fsl_mc_free_irqs(mc_dev); ++ return error; ++} ++ ++/** + * dprc_probe - callback invoked when a DPRC is being bound to this driver + * + * @mc_dev: Pointer to fsl-mc device representing a DPRC +@@ -476,6 +701,13 @@ static int dprc_probe(struct fsl_mc_devi + if (error < 0) + goto error_cleanup_open; + ++ /* ++ * Configure interrupt for the DPRC object associated with this MC bus: ++ */ ++ error = dprc_setup_irq(mc_dev); ++ if (error < 0) ++ goto error_cleanup_open; ++ + dev_info(&mc_dev->dev, "DPRC device bound to driver"); + return 0; + +@@ -494,6 +726,15 @@ error_cleanup_msi_domain: + return error; + } + ++/* ++ * Tear down interrupt for a given DPRC object ++ */ ++static void dprc_teardown_irq(struct fsl_mc_device *mc_dev) ++{ ++ (void)disable_dprc_irq(mc_dev); ++ fsl_mc_free_irqs(mc_dev); ++} ++ + /** + * dprc_remove - callback invoked when a DPRC is being unbound from this driver + * +@@ -514,6 +755,12 @@ static int dprc_remove(struct fsl_mc_dev + if (WARN_ON(!mc_dev->mc_io)) + return -EINVAL; + ++ if (WARN_ON(!mc_bus->irq_resources)) ++ return -EINVAL; ++ ++ if (dev_get_msi_domain(&mc_dev->dev)) ++ dprc_teardown_irq(mc_dev); ++ + device_for_each_child(&mc_dev->dev, NULL, __fsl_mc_device_remove); + dprc_cleanup_all_resource_pools(mc_dev); + error = dprc_close(mc_dev->mc_io, 0, mc_dev->mc_handle); diff --git a/target/linux/layerscape/patches-4.4/7153-staging-fsl-mc-Added-MSI-support-to-the-MC-bus-drive.patch b/target/linux/layerscape/patches-4.4/7153-staging-fsl-mc-Added-MSI-support-to-the-MC-bus-drive.patch new file mode 100644 index 0000000000..cbc6c5e650 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7153-staging-fsl-mc-Added-MSI-support-to-the-MC-bus-drive.patch @@ -0,0 +1,59 @@ +From f588a135d9260f2e7fe29b0bb0b5294fc9c99f6c Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:29 -0600 +Subject: [PATCH 153/226] staging: fsl-mc: Added MSI support to the MC bus + driver + +Initialize/Cleanup ITS-MSI support for the MC bus driver at driver +init/exit time. Associate an MSI domain with each DPAA2 child device. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -16,6 +16,8 @@ + #include + #include + #include ++#include ++#include + #include "../include/dpmng.h" + #include "../include/mc-sys.h" + #include "dprc-cmd.h" +@@ -472,6 +474,8 @@ int fsl_mc_device_add(struct dprc_obj_de + mc_dev->icid = parent_mc_dev->icid; + mc_dev->dma_mask = FSL_MC_DEFAULT_DMA_MASK; + mc_dev->dev.dma_mask = &mc_dev->dma_mask; ++ dev_set_msi_domain(&mc_dev->dev, ++ dev_get_msi_domain(&parent_mc_dev->dev)); + } + + /* +@@ -833,8 +837,15 @@ static int __init fsl_mc_bus_driver_init + if (error < 0) + goto error_cleanup_dprc_driver; + ++ error = its_fsl_mc_msi_init(); ++ if (error < 0) ++ goto error_cleanup_mc_allocator; ++ + return 0; + ++error_cleanup_mc_allocator: ++ fsl_mc_allocator_driver_exit(); ++ + error_cleanup_dprc_driver: + dprc_driver_exit(); + +@@ -856,6 +867,7 @@ static void __exit fsl_mc_bus_driver_exi + if (WARN_ON(!mc_dev_cache)) + return; + ++ its_fsl_mc_msi_cleanup(); + fsl_mc_allocator_driver_exit(); + dprc_driver_exit(); + platform_driver_unregister(&fsl_mc_bus_driver); diff --git a/target/linux/layerscape/patches-4.4/7154-staging-fsl-mc-Remove-unneeded-parentheses.patch b/target/linux/layerscape/patches-4.4/7154-staging-fsl-mc-Remove-unneeded-parentheses.patch new file mode 100644 index 0000000000..64af81c19e --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7154-staging-fsl-mc-Remove-unneeded-parentheses.patch @@ -0,0 +1,39 @@ +From 6ce3c078c4eac406b38de689c8e366d7345a51ba Mon Sep 17 00:00:00 2001 +From: Janani Ravichandran +Date: Thu, 11 Feb 2016 18:00:25 -0500 +Subject: [PATCH 154/226] staging: fsl-mc: Remove unneeded parentheses + +Remove unneeded parentheses on the right hand side of assignment +statements. +Semantic patch: + +@@ +expression a, b, c; +@@ + +( + a = (b == c) +| + a = +- ( + b +- ) +) + +Signed-off-by: Janani Ravichandran +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -129,7 +129,7 @@ static void check_plugged_state_change(s + { + int error; + u32 plugged_flag_at_mc = +- (obj_desc->state & DPRC_OBJ_STATE_PLUGGED); ++ obj_desc->state & DPRC_OBJ_STATE_PLUGGED; + + if (plugged_flag_at_mc != + (mc_dev->obj_desc.state & DPRC_OBJ_STATE_PLUGGED)) { diff --git a/target/linux/layerscape/patches-4.4/7155-staging-fsl-mc-Do-not-allow-building-as-a-module.patch b/target/linux/layerscape/patches-4.4/7155-staging-fsl-mc-Do-not-allow-building-as-a-module.patch new file mode 100644 index 0000000000..1ae62537fc --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7155-staging-fsl-mc-Do-not-allow-building-as-a-module.patch @@ -0,0 +1,30 @@ +From 322ff2fe86ec4dead2d2bceb20b624c72bdd1405 Mon Sep 17 00:00:00 2001 +From: Thierry Reding +Date: Mon, 15 Feb 2016 14:22:22 +0100 +Subject: [PATCH 155/226] staging: fsl-mc: Do not allow building as a module + +This driver uses functionality (MSI IRQ domain) whose symbols aren't +exported, and hence the modular build fails. While arguably there might +be reasons to make these symbols available to modules, that change would +be fairly involved and the set of exported functions should be carefully +auditioned. Fix the build failure for now by marking the driver boolean. + +Cc: J. German Rivera +Cc: Greg Kroah-Hartman +Signed-off-by: Thierry Reding +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/fsl-mc/bus/Kconfig ++++ b/drivers/staging/fsl-mc/bus/Kconfig +@@ -7,7 +7,7 @@ + # + + config FSL_MC_BUS +- tristate "Freescale Management Complex (MC) bus driver" ++ bool "Freescale Management Complex (MC) bus driver" + depends on OF && ARM64 + select GENERIC_MSI_IRQ_DOMAIN + help diff --git a/target/linux/layerscape/patches-4.4/7156-staging-fsl-mc-Avoid-section-mismatch.patch b/target/linux/layerscape/patches-4.4/7156-staging-fsl-mc-Avoid-section-mismatch.patch new file mode 100644 index 0000000000..60fecd9b08 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7156-staging-fsl-mc-Avoid-section-mismatch.patch @@ -0,0 +1,43 @@ +From b2e5cfb43faf26517d191de65121f1a40166340f Mon Sep 17 00:00:00 2001 +From: Thierry Reding +Date: Mon, 15 Feb 2016 14:22:23 +0100 +Subject: [PATCH 156/226] staging: fsl-mc: Avoid section mismatch + +The fsl_mc_allocator_driver_exit() function is marked __exit, but is +called by the error handling code in fsl_mc_allocator_driver_init(). +This results in a section mismatch, which in turn could lead to +executing random code. + +Remove the __exit annotation to fix this. + +Cc: J. German Rivera +Cc: Greg Kroah-Hartman +Signed-off-by: Thierry Reding +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-allocator.c | 2 +- + drivers/staging/fsl-mc/include/mc-private.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-allocator.c ++++ b/drivers/staging/fsl-mc/bus/mc-allocator.c +@@ -756,7 +756,7 @@ int __init fsl_mc_allocator_driver_init( + return fsl_mc_driver_register(&fsl_mc_allocator_driver); + } + +-void __exit fsl_mc_allocator_driver_exit(void) ++void fsl_mc_allocator_driver_exit(void) + { + fsl_mc_driver_unregister(&fsl_mc_allocator_driver); + } +--- a/drivers/staging/fsl-mc/include/mc-private.h ++++ b/drivers/staging/fsl-mc/include/mc-private.h +@@ -123,7 +123,7 @@ void dprc_driver_exit(void); + + int __init fsl_mc_allocator_driver_init(void); + +-void __exit fsl_mc_allocator_driver_exit(void); ++void fsl_mc_allocator_driver_exit(void); + + int __must_check fsl_mc_resource_allocate(struct fsl_mc_bus *mc_bus, + enum fsl_mc_pool_type pool_type, diff --git a/target/linux/layerscape/patches-4.4/7157-staging-fsl-mc-Remove-unneeded-else-following-a-retu.patch b/target/linux/layerscape/patches-4.4/7157-staging-fsl-mc-Remove-unneeded-else-following-a-retu.patch new file mode 100644 index 0000000000..ee0d1f62bc --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7157-staging-fsl-mc-Remove-unneeded-else-following-a-retu.patch @@ -0,0 +1,45 @@ +From 5f82c6ff69f3a4bb635e619a893292bea711421e Mon Sep 17 00:00:00 2001 +From: Janani Ravichandran +Date: Thu, 18 Feb 2016 17:22:50 -0500 +Subject: [PATCH 157/226] staging: fsl-mc: Remove unneeded else following a + return + +Remove unnecessary else when there is a return statement in the +corresponding if block. Coccinelle patch used: + +@rule1@ +expression e1; +@@ + + if (e1) { ... return ...; } +- else{ + ... +- } + +@rule2@ +expression e2; +statement s1; +@@ + + if(e2) { ... return ...; } +- else + s1 + +Signed-off-by: Janani Ravichandran +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -248,8 +248,7 @@ static bool fsl_mc_is_root_dprc(struct d + fsl_mc_get_root_dprc(dev, &root_dprc_dev); + if (!root_dprc_dev) + return false; +- else +- return dev == root_dprc_dev; ++ return dev == root_dprc_dev; + } + + static int get_dprc_icid(struct fsl_mc_io *mc_io, diff --git a/target/linux/layerscape/patches-4.4/7158-staging-fsl-mc-Drop-unneeded-void-pointer-cast.patch b/target/linux/layerscape/patches-4.4/7158-staging-fsl-mc-Drop-unneeded-void-pointer-cast.patch new file mode 100644 index 0000000000..51e8792985 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7158-staging-fsl-mc-Drop-unneeded-void-pointer-cast.patch @@ -0,0 +1,43 @@ +From d9605741556a15dceed105afd7369d644aa46207 Mon Sep 17 00:00:00 2001 +From: Janani Ravichandran +Date: Thu, 25 Feb 2016 14:46:11 -0500 +Subject: [PATCH 158/226] staging: fsl-mc: Drop unneeded void pointer cast + +Void pointers need not be cast to other pointer types. +Semantic patch used: + +@r@ +expression x; +void *e; +type T; +identifier f; +@@ + +( + *((T *)e) +| + ((T *)x) [...] +| + ((T *)x)->f +| +- (T *) + e +) + +Signed-off-by: Janani Ravichandran +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -407,7 +407,7 @@ static irqreturn_t dprc_irq0_handler_thr + { + int error; + u32 status; +- struct device *dev = (struct device *)arg; ++ struct device *dev = arg; + struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); + struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_dev); + struct fsl_mc_io *mc_io = mc_dev->mc_io; diff --git a/target/linux/layerscape/patches-4.4/7159-staging-fsl-mc-bus-Eliminate-double-function-call.patch b/target/linux/layerscape/patches-4.4/7159-staging-fsl-mc-bus-Eliminate-double-function-call.patch new file mode 100644 index 0000000000..74ac4fd28f --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7159-staging-fsl-mc-bus-Eliminate-double-function-call.patch @@ -0,0 +1,73 @@ +From ecd7b5d9616e50f48a400749f17db19fd8a43f25 Mon Sep 17 00:00:00 2001 +From: Bhaktipriya Shridhar +Date: Sun, 28 Feb 2016 23:58:05 +0530 +Subject: [PATCH 159/226] staging: fsl-mc: bus: Eliminate double function call + +A call to irq_find_matching_host was already made and the result +has been stored in mc_msi_domain. mc_msi_domain is again reassigned +using the same function call which is redundant. + +irq_find_matching_host returns/locates a domain for a given fwnode. +The domain is identified using device node and bus_token(if several +domains have same device node but different purposes they can be +distinguished using bus-specific token). +http://www.bricktou.com/include/linux/irqdomain_irq_find_matching_host_en.html + +Also, of_property_read_bool finds and reads a boolean from a property +device node from which the property value is to be read. It doesn't +alter the device node. +http://lists.infradead.org/pipermail/linux-arm-kernel/2012-February/083698.html + +Since, both the function calls have the same device node and bus_token, +the return values shall be the same. Hence, the second call has been +removed. + +This was done using Coccinelle: + +@r@ +idexpression *x; +identifier f; +position p1,p2; +@@ + +x@p1 = f(...) +... when != x +( +x@p2 = f(...) +) + +@script:python@ +p1 << r.p1; +p2 << r.p2; +@@ + +if (p1[0].line == p2[0].line): + cocci.include_match(False) + +@@ +idexpression *x; +identifier f; +position r.p1,r.p2; +@@ + +*x@p1 = f(...) +... +*x@p2 = f(...) + +Signed-off-by: Bhaktipriya Shridhar +Signed-off-by: Greg Kroah-Hartman +--- + .../staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c ++++ b/drivers/staging/fsl-mc/bus/irq-gic-v3-its-fsl-mc-msi.c +@@ -118,8 +118,6 @@ void its_fsl_mc_msi_cleanup(void) + if (!of_property_read_bool(np, "msi-controller")) + continue; + +- mc_msi_domain = irq_find_matching_host(np, +- DOMAIN_BUS_FSL_MC_MSI); + if (mc_msi_domain && + mc_msi_domain->host_data == &its_fsl_mc_msi_domain_info) + irq_domain_remove(mc_msi_domain); diff --git a/target/linux/layerscape/patches-4.4/7160-Staging-fsl-mc-Replace-pr_debug-with-dev_dbg.patch b/target/linux/layerscape/patches-4.4/7160-Staging-fsl-mc-Replace-pr_debug-with-dev_dbg.patch new file mode 100644 index 0000000000..2d9c947263 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7160-Staging-fsl-mc-Replace-pr_debug-with-dev_dbg.patch @@ -0,0 +1,96 @@ +From 8727f71717b449a4c74a5a599374c05822d525f7 Mon Sep 17 00:00:00 2001 +From: Bhumika Goyal +Date: Fri, 4 Mar 2016 19:14:52 +0530 +Subject: [PATCH 160/226] Staging: fsl-mc: Replace pr_debug with dev_dbg + +This patch replaces pr_debug calls with dev_dbg when the device structure +is available as dev_* prints identifying information about the struct +device. +Done using coccinelle: + +@r exists@ +identifier f, s; +identifier x; +position p; +@@ +f(...,struct s *x,...) { +<+... +when != x == NULL +\(pr_err@p\|pr_debug@p\|pr_info\)(...); +...+> +} + +@r2@ +identifier fld2; +identifier r.s; +@@ + +struct s { + ... + struct device *fld2; + ... +}; + +@@ +identifier r.x,r2.fld2; +position r.p; +@@ + +( +-pr_err@p ++dev_err + ( ++ &x->fld2, +...) +| +- pr_debug@p ++ dev_dbg + ( ++ &x->fld2, +...) +| +- pr_info@p ++ dev_info + ( ++ &x->fld2, +...) +) + +Signed-off-by: Bhumika Goyal +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-sys.c | 9 ++++++--- + 1 file changed, 6 insertions(+), 3 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-sys.c ++++ b/drivers/staging/fsl-mc/bus/mc-sys.c +@@ -328,7 +328,8 @@ static int mc_polling_wait_preemptible(s + MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS); + + if (time_after_eq(jiffies, jiffies_until_timeout)) { +- pr_debug("MC command timed out (portal: %#llx, obj handle: %#x, command: %#x)\n", ++ dev_dbg(&mc_io->dev, ++ "MC command timed out (portal: %#llx, obj handle: %#x, command: %#x)\n", + mc_io->portal_phys_addr, + (unsigned int) + MC_CMD_HDR_READ_TOKEN(cmd->header), +@@ -369,7 +370,8 @@ static int mc_polling_wait_atomic(struct + udelay(MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS); + timeout_usecs -= MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS; + if (timeout_usecs == 0) { +- pr_debug("MC command timed out (portal: %#llx, obj handle: %#x, command: %#x)\n", ++ dev_dbg(&mc_io->dev, ++ "MC command timed out (portal: %#llx, obj handle: %#x, command: %#x)\n", + mc_io->portal_phys_addr, + (unsigned int) + MC_CMD_HDR_READ_TOKEN(cmd->header), +@@ -424,7 +426,8 @@ int mc_send_command(struct fsl_mc_io *mc + goto common_exit; + + if (status != MC_CMD_STATUS_OK) { +- pr_debug("MC command failed: portal: %#llx, obj handle: %#x, command: %#x, status: %s (%#x)\n", ++ dev_dbg(&mc_io->dev, ++ "MC command failed: portal: %#llx, obj handle: %#x, command: %#x, status: %s (%#x)\n", + mc_io->portal_phys_addr, + (unsigned int)MC_CMD_HDR_READ_TOKEN(cmd->header), + (unsigned int)MC_CMD_HDR_READ_CMDID(cmd->header), diff --git a/target/linux/layerscape/patches-4.4/7161-Staging-fsl-mc-Replace-pr_err-with-dev_err.patch b/target/linux/layerscape/patches-4.4/7161-Staging-fsl-mc-Replace-pr_err-with-dev_err.patch new file mode 100644 index 0000000000..3da41c16c3 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7161-Staging-fsl-mc-Replace-pr_err-with-dev_err.patch @@ -0,0 +1,83 @@ +From 79b4625a6ab72251e00aa94ee22a6bfe32dbeeda Mon Sep 17 00:00:00 2001 +From: Bhumika Goyal +Date: Fri, 4 Mar 2016 19:15:55 +0530 +Subject: [PATCH 161/226] Staging: fsl-mc: Replace pr_err with dev_err + +This patch replaces pr_err calls with dev_err when the device structure +is available as dev_* prints identifying information about the struct device. +Done using coccinelle: + +@r exists@ +identifier f, s; +identifier x; +position p; +@@ +f(...,struct s *x,...) { +<+... +when != x == NULL +\(pr_err@p\|pr_debug@p\|pr_info\)(...); +...+> +} + +@r2@ +identifier fld2; +identifier r.s; +@@ + +struct s { + ... + struct device *fld2; + ... +}; + +@@ +identifier r.x,r2.fld2; +position r.p; +@@ + +( +-pr_err@p ++dev_err + ( ++ &x->fld2, +...) +| +- pr_debug@p ++ dev_dbg + ( ++ &x->fld2, +...) +| +- pr_info@p ++ dev_info + ( ++ &x->fld2, +...) +) + +Signed-off-by: Bhumika Goyal +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -260,14 +260,15 @@ static int get_dprc_icid(struct fsl_mc_i + + error = dprc_open(mc_io, 0, container_id, &dprc_handle); + if (error < 0) { +- pr_err("dprc_open() failed: %d\n", error); ++ dev_err(&mc_io->dev, "dprc_open() failed: %d\n", error); + return error; + } + + memset(&attr, 0, sizeof(attr)); + error = dprc_get_attributes(mc_io, 0, dprc_handle, &attr); + if (error < 0) { +- pr_err("dprc_get_attributes() failed: %d\n", error); ++ dev_err(&mc_io->dev, "dprc_get_attributes() failed: %d\n", ++ error); + goto common_cleanup; + } + diff --git a/target/linux/layerscape/patches-4.4/7162-staging-fsl-mc-fix-incorrect-type-passed-to-dev_dbg-.patch b/target/linux/layerscape/patches-4.4/7162-staging-fsl-mc-fix-incorrect-type-passed-to-dev_dbg-.patch new file mode 100644 index 0000000000..4a326020df --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7162-staging-fsl-mc-fix-incorrect-type-passed-to-dev_dbg-.patch @@ -0,0 +1,48 @@ +From 83e0f572a74bceeb3736b19b929c91d12d1d6d80 Mon Sep 17 00:00:00 2001 +From: Cihangir Akturk +Date: Mon, 14 Mar 2016 18:14:06 +0200 +Subject: [PATCH 162/226] staging: fsl-mc: fix incorrect type passed to + dev_dbg macros + +dev_dbg macros expect const struct device ** as its second +argument but here the argument we are passing is of type +struct device ** this patch fixes this error. + +Fixes: de71daf5c839 ("Staging: fsl-mc: Replace pr_debug with dev_dbg") +Cc: Bhumika Goyal +Reported-by: Guenter Roeck +Signed-off-by: Cihangir Akturk +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-sys.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-sys.c ++++ b/drivers/staging/fsl-mc/bus/mc-sys.c +@@ -328,7 +328,7 @@ static int mc_polling_wait_preemptible(s + MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS); + + if (time_after_eq(jiffies, jiffies_until_timeout)) { +- dev_dbg(&mc_io->dev, ++ dev_dbg(mc_io->dev, + "MC command timed out (portal: %#llx, obj handle: %#x, command: %#x)\n", + mc_io->portal_phys_addr, + (unsigned int) +@@ -370,7 +370,7 @@ static int mc_polling_wait_atomic(struct + udelay(MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS); + timeout_usecs -= MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS; + if (timeout_usecs == 0) { +- dev_dbg(&mc_io->dev, ++ dev_dbg(mc_io->dev, + "MC command timed out (portal: %#llx, obj handle: %#x, command: %#x)\n", + mc_io->portal_phys_addr, + (unsigned int) +@@ -426,7 +426,7 @@ int mc_send_command(struct fsl_mc_io *mc + goto common_exit; + + if (status != MC_CMD_STATUS_OK) { +- dev_dbg(&mc_io->dev, ++ dev_dbg(mc_io->dev, + "MC command failed: portal: %#llx, obj handle: %#x, command: %#x, status: %s (%#x)\n", + mc_io->portal_phys_addr, + (unsigned int)MC_CMD_HDR_READ_TOKEN(cmd->header), diff --git a/target/linux/layerscape/patches-4.4/7163-staging-fsl-mc-fix-incorrect-type-passed-to-dev_err-.patch b/target/linux/layerscape/patches-4.4/7163-staging-fsl-mc-fix-incorrect-type-passed-to-dev_err-.patch new file mode 100644 index 0000000000..024e10f297 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7163-staging-fsl-mc-fix-incorrect-type-passed-to-dev_err-.patch @@ -0,0 +1,38 @@ +From 79929c151efbc047a8a82f9cafcb9238465caa86 Mon Sep 17 00:00:00 2001 +From: Cihangir Akturk +Date: Mon, 14 Mar 2016 18:14:07 +0200 +Subject: [PATCH 163/226] staging: fsl-mc: fix incorrect type passed to + dev_err macros + +dev_err macros expect const struct device ** as its second +argument, but here the argument we are passing is of typ +struct device **. This patch fixes this error. + +Fixes: 454b0ec8bf99 ("Staging: fsl-mc: Replace pr_err with dev_err") +Cc: Bhumika Goyal +Reported-by: Guenter Roeck +Signed-off-by: Cihangir Akturk +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -260,14 +260,14 @@ static int get_dprc_icid(struct fsl_mc_i + + error = dprc_open(mc_io, 0, container_id, &dprc_handle); + if (error < 0) { +- dev_err(&mc_io->dev, "dprc_open() failed: %d\n", error); ++ dev_err(mc_io->dev, "dprc_open() failed: %d\n", error); + return error; + } + + memset(&attr, 0, sizeof(attr)); + error = dprc_get_attributes(mc_io, 0, dprc_handle, &attr); + if (error < 0) { +- dev_err(&mc_io->dev, "dprc_get_attributes() failed: %d\n", ++ dev_err(mc_io->dev, "dprc_get_attributes() failed: %d\n", + error); + goto common_cleanup; + } diff --git a/target/linux/layerscape/patches-4.4/7164-staging-fsl-mc-get-rid-of-mutex_locked-variables.patch b/target/linux/layerscape/patches-4.4/7164-staging-fsl-mc-get-rid-of-mutex_locked-variables.patch new file mode 100644 index 0000000000..d16485f4cd --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7164-staging-fsl-mc-get-rid-of-mutex_locked-variables.patch @@ -0,0 +1,207 @@ +From d36a6b361a3a181559daebcf32e11ab18431a854 Mon Sep 17 00:00:00 2001 +From: Cihangir Akturk +Date: Sat, 9 Apr 2016 21:45:18 +0300 +Subject: [PATCH 164/226] staging: fsl-mc: get rid of mutex_locked variables + +Remove mutex_locked variables which are used to determine whether mutex is +locked, instead add another label to unlock mutex on premature exits due to +an error. + +This patch also addresses the folowing warnings reported by coccinelle: + +drivers/staging/fsl-mc/bus/mc-allocator.c:237:1-7: preceding lock on line 204 +drivers/staging/fsl-mc/bus/mc-allocator.c:89:1-7: preceding lock on line 57 +drivers/staging/fsl-mc/bus/mc-allocator.c:157:1-7: preceding lock on line 124 + +Signed-off-by: Cihangir Akturk +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-allocator.c | 61 ++++++++++++----------------- + 1 file changed, 24 insertions(+), 37 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-allocator.c ++++ b/drivers/staging/fsl-mc/bus/mc-allocator.c +@@ -39,7 +39,6 @@ static int __must_check fsl_mc_resource_ + struct fsl_mc_resource *resource; + struct fsl_mc_device *mc_bus_dev = &mc_bus->mc_dev; + int error = -EINVAL; +- bool mutex_locked = false; + + if (WARN_ON(pool_type < 0 || pool_type >= FSL_MC_NUM_POOL_TYPES)) + goto out; +@@ -55,13 +54,12 @@ static int __must_check fsl_mc_resource_ + goto out; + + mutex_lock(&res_pool->mutex); +- mutex_locked = true; + + if (WARN_ON(res_pool->max_count < 0)) +- goto out; ++ goto out_unlock; + if (WARN_ON(res_pool->free_count < 0 || + res_pool->free_count > res_pool->max_count)) +- goto out; ++ goto out_unlock; + + resource = devm_kzalloc(&mc_bus_dev->dev, sizeof(*resource), + GFP_KERNEL); +@@ -69,7 +67,7 @@ static int __must_check fsl_mc_resource_ + error = -ENOMEM; + dev_err(&mc_bus_dev->dev, + "Failed to allocate memory for fsl_mc_resource\n"); +- goto out; ++ goto out_unlock; + } + + resource->type = pool_type; +@@ -82,10 +80,9 @@ static int __must_check fsl_mc_resource_ + res_pool->free_count++; + res_pool->max_count++; + error = 0; ++out_unlock: ++ mutex_unlock(&res_pool->mutex); + out: +- if (mutex_locked) +- mutex_unlock(&res_pool->mutex); +- + return error; + } + +@@ -106,7 +103,6 @@ static int __must_check fsl_mc_resource_ + struct fsl_mc_resource_pool *res_pool; + struct fsl_mc_resource *resource; + int error = -EINVAL; +- bool mutex_locked = false; + + if (WARN_ON(!FSL_MC_IS_ALLOCATABLE(mc_dev->obj_desc.type))) + goto out; +@@ -122,13 +118,12 @@ static int __must_check fsl_mc_resource_ + goto out; + + mutex_lock(&res_pool->mutex); +- mutex_locked = true; + + if (WARN_ON(res_pool->max_count <= 0)) +- goto out; ++ goto out_unlock; + if (WARN_ON(res_pool->free_count <= 0 || + res_pool->free_count > res_pool->max_count)) +- goto out; ++ goto out_unlock; + + /* + * If the device is currently allocated, its resource is not +@@ -139,7 +134,7 @@ static int __must_check fsl_mc_resource_ + dev_err(&mc_bus_dev->dev, + "Device %s cannot be removed from resource pool\n", + dev_name(&mc_dev->dev)); +- goto out; ++ goto out_unlock; + } + + list_del(&resource->node); +@@ -150,10 +145,9 @@ static int __must_check fsl_mc_resource_ + devm_kfree(&mc_bus_dev->dev, resource); + mc_dev->resource = NULL; + error = 0; ++out_unlock: ++ mutex_unlock(&res_pool->mutex); + out: +- if (mutex_locked) +- mutex_unlock(&res_pool->mutex); +- + return error; + } + +@@ -188,21 +182,19 @@ int __must_check fsl_mc_resource_allocat + struct fsl_mc_resource *resource; + struct fsl_mc_device *mc_bus_dev = &mc_bus->mc_dev; + int error = -EINVAL; +- bool mutex_locked = false; + + BUILD_BUG_ON(ARRAY_SIZE(fsl_mc_pool_type_strings) != + FSL_MC_NUM_POOL_TYPES); + + *new_resource = NULL; + if (WARN_ON(pool_type < 0 || pool_type >= FSL_MC_NUM_POOL_TYPES)) +- goto error; ++ goto out; + + res_pool = &mc_bus->resource_pools[pool_type]; + if (WARN_ON(res_pool->mc_bus != mc_bus)) +- goto error; ++ goto out; + + mutex_lock(&res_pool->mutex); +- mutex_locked = true; + resource = list_first_entry_or_null(&res_pool->free_list, + struct fsl_mc_resource, node); + +@@ -212,28 +204,26 @@ int __must_check fsl_mc_resource_allocat + dev_err(&mc_bus_dev->dev, + "No more resources of type %s left\n", + fsl_mc_pool_type_strings[pool_type]); +- goto error; ++ goto out_unlock; + } + + if (WARN_ON(resource->type != pool_type)) +- goto error; ++ goto out_unlock; + if (WARN_ON(resource->parent_pool != res_pool)) +- goto error; ++ goto out_unlock; + if (WARN_ON(res_pool->free_count <= 0 || + res_pool->free_count > res_pool->max_count)) +- goto error; ++ goto out_unlock; + + list_del(&resource->node); + INIT_LIST_HEAD(&resource->node); + + res_pool->free_count--; ++ error = 0; ++out_unlock: + mutex_unlock(&res_pool->mutex); + *new_resource = resource; +- return 0; +-error: +- if (mutex_locked) +- mutex_unlock(&res_pool->mutex); +- ++out: + return error; + } + EXPORT_SYMBOL_GPL(fsl_mc_resource_allocate); +@@ -241,26 +231,23 @@ EXPORT_SYMBOL_GPL(fsl_mc_resource_alloca + void fsl_mc_resource_free(struct fsl_mc_resource *resource) + { + struct fsl_mc_resource_pool *res_pool; +- bool mutex_locked = false; + + res_pool = resource->parent_pool; + if (WARN_ON(resource->type != res_pool->type)) +- goto out; ++ return; + + mutex_lock(&res_pool->mutex); +- mutex_locked = true; + if (WARN_ON(res_pool->free_count < 0 || + res_pool->free_count >= res_pool->max_count)) +- goto out; ++ goto out_unlock; + + if (WARN_ON(!list_empty(&resource->node))) +- goto out; ++ goto out_unlock; + + list_add_tail(&resource->node, &res_pool->free_list); + res_pool->free_count++; +-out: +- if (mutex_locked) +- mutex_unlock(&res_pool->mutex); ++out_unlock: ++ mutex_unlock(&res_pool->mutex); + } + EXPORT_SYMBOL_GPL(fsl_mc_resource_free); + diff --git a/target/linux/layerscape/patches-4.4/7165-staging-fsl-mc-TODO-updates.patch b/target/linux/layerscape/patches-4.4/7165-staging-fsl-mc-TODO-updates.patch new file mode 100644 index 0000000000..858c6e21e8 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7165-staging-fsl-mc-TODO-updates.patch @@ -0,0 +1,49 @@ +From 7b3bffea6d36f396faf1814088f03a6b8efe1ccb Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Mon, 11 Apr 2016 11:48:37 -0500 +Subject: [PATCH 165/226] staging: fsl-mc: TODO updates + +remove 3 of the remaining TODO items: + + -multiple root fsl-mc buses-- done in patch series starting with + commit 14f928054a05 ("staging: fsl-mc: abstract test for existence + of fsl-mc bus") + + -interrupt support-- done in patch series starting with + commit 9b1b282ccd81 ("irqdomain: Added domain bus token + DOMAIN_BUS_FSL_MC_MSI") + + -MC command serialization-- done in commit 63f2be5c3b358 ("staging: + fsl-mc: Added serialization to mc_send_command()") + +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/TODO | 13 ------------- + 1 file changed, 13 deletions(-) + +--- a/drivers/staging/fsl-mc/TODO ++++ b/drivers/staging/fsl-mc/TODO +@@ -1,21 +1,8 @@ +-* Decide if multiple root fsl-mc buses will be supported per Linux instance, +- and if so add support for this. +- + * Add at least one device driver for a DPAA2 object (child device of the + fsl-mc bus). Most likely candidate for this is adding DPAA2 Ethernet + driver support, which depends on drivers for several objects: DPNI, + DPIO, DPMAC. Other pre-requisites include: + +- * interrupt support. for meaningful driver support we need +- interrupts, and thus need message interrupt support by the bus +- driver. +- -Note: this has dependencies on generic MSI support work +- in process upstream, see [1] and [2]. +- +- * Management Complex (MC) command serialization. locking mechanisms +- are needed by drivers to serialize commands sent to the MC, including +- from atomic context. +- + * MC firmware uprev. The MC firmware upon which the fsl-mc + bus driver and DPAA2 object drivers are based is continuing + to evolve, so minor updates are needed to keep in sync with binary diff --git a/target/linux/layerscape/patches-4.4/7166-staging-fsl-mc-DPAA2-overview-readme-update.patch b/target/linux/layerscape/patches-4.4/7166-staging-fsl-mc-DPAA2-overview-readme-update.patch new file mode 100644 index 0000000000..f63574d649 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7166-staging-fsl-mc-DPAA2-overview-readme-update.patch @@ -0,0 +1,279 @@ +From 720bf9c9a6fdff63ecc4b382a5092c0020fb7b42 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Mon, 11 Apr 2016 11:48:42 -0500 +Subject: [PATCH 166/226] staging: fsl-mc: DPAA2 overview readme update + +incorporated feedback from review comments, other misc cleanup/tweaks + +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/README.txt | 138 +++++++++++++++++++++---------------- + 1 file changed, 80 insertions(+), 58 deletions(-) + +--- a/drivers/staging/fsl-mc/README.txt ++++ b/drivers/staging/fsl-mc/README.txt +@@ -11,11 +11,11 @@ Contents summary + -Overview of DPAA2 objects + -DPAA2 Linux driver architecture overview + -bus driver +- -dprc driver ++ -DPRC driver + -allocator +- -dpio driver ++ -DPIO driver + -Ethernet +- -mac ++ -MAC + + DPAA2 Overview + -------------- +@@ -37,6 +37,9 @@ interfaces, an L2 switch, or accelerator + The MC provides memory-mapped I/O command interfaces (MC portals) + which DPAA2 software drivers use to operate on DPAA2 objects: + ++The diagram below shows an overview of the DPAA2 resource management ++architecture: ++ + +--------------------------------------+ + | OS | + | DPAA2 drivers | +@@ -77,13 +80,13 @@ DPIO objects. + + Overview of DPAA2 Objects + ------------------------- +-The section provides a brief overview of some key objects +-in the DPAA2 hardware. A simple scenario is described illustrating +-the objects involved in creating a network interfaces. ++The section provides a brief overview of some key DPAA2 objects. ++A simple scenario is described illustrating the objects involved ++in creating a network interfaces. + + -DPRC (Datapath Resource Container) + +- A DPRC is an container object that holds all the other ++ A DPRC is a container object that holds all the other + types of DPAA2 objects. In the example diagram below there + are 8 objects of 5 types (DPMCP, DPIO, DPBP, DPNI, and DPMAC) + in the container. +@@ -101,23 +104,23 @@ the objects involved in creating a netwo + | | + +---------------------------------------------------------+ + +- From the point of view of an OS, a DPRC is bus-like. Like +- a plug-and-play bus, such as PCI, DPRC commands can be used to +- enumerate the contents of the DPRC, discover the hardware +- objects present (including mappable regions and interrupts). ++ From the point of view of an OS, a DPRC behaves similar to a plug and ++ play bus, like PCI. DPRC commands can be used to enumerate the contents ++ of the DPRC, discover the hardware objects present (including mappable ++ regions and interrupts). + +- dprc.1 (bus) ++ DPRC.1 (bus) + | + +--+--------+-------+-------+-------+ + | | | | | +- dpmcp.1 dpio.1 dpbp.1 dpni.1 dpmac.1 +- dpmcp.2 dpio.2 +- dpmcp.3 ++ DPMCP.1 DPIO.1 DPBP.1 DPNI.1 DPMAC.1 ++ DPMCP.2 DPIO.2 ++ DPMCP.3 + + Hardware objects can be created and destroyed dynamically, providing + the ability to hot plug/unplug objects in and out of the DPRC. + +- A DPRC has a mappable mmio region (an MC portal) that can be used ++ A DPRC has a mappable MMIO region (an MC portal) that can be used + to send MC commands. It has an interrupt for status events (like + hotplug). + +@@ -137,10 +140,11 @@ the objects involved in creating a netwo + A typical Ethernet NIC is monolithic-- the NIC device contains TX/RX + queuing mechanisms, configuration mechanisms, buffer management, + physical ports, and interrupts. DPAA2 uses a more granular approach +- utilizing multiple hardware objects. Each object has specialized +- functions, and are used together by software to provide Ethernet network +- interface functionality. This approach provides efficient use of finite +- hardware resources, flexibility, and performance advantages. ++ utilizing multiple hardware objects. Each object provides specialized ++ functions. Groups of these objects are used by software to provide ++ Ethernet network interface functionality. This approach provides ++ efficient use of finite hardware resources, flexibility, and ++ performance advantages. + + The diagram below shows the objects needed for a simple + network interface configuration on a system with 2 CPUs. +@@ -168,46 +172,52 @@ the objects involved in creating a netwo + + Below the objects are described. For each object a brief description + is provided along with a summary of the kinds of operations the object +- supports and a summary of key resources of the object (mmio regions +- and irqs). ++ supports and a summary of key resources of the object (MMIO regions ++ and IRQs). + + -DPMAC (Datapath Ethernet MAC): represents an Ethernet MAC, a + hardware device that connects to an Ethernet PHY and allows + physical transmission and reception of Ethernet frames. +- -mmio regions: none +- -irqs: dpni link change ++ -MMIO regions: none ++ -IRQs: DPNI link change + -commands: set link up/down, link config, get stats, +- irq config, enable, reset ++ IRQ config, enable, reset + + -DPNI (Datapath Network Interface): contains TX/RX queues, +- network interface configuration, and rx buffer pool configuration +- mechanisms. +- -mmio regions: none +- -irqs: link state ++ network interface configuration, and RX buffer pool configuration ++ mechanisms. The TX/RX queues are in memory and are identified by ++ queue number. ++ -MMIO regions: none ++ -IRQs: link state + -commands: port config, offload config, queue config, +- parse/classify config, irq config, enable, reset ++ parse/classify config, IRQ config, enable, reset + + -DPIO (Datapath I/O): provides interfaces to enqueue and dequeue +- packets and do hardware buffer pool management operations. For +- optimum performance there is typically DPIO per CPU. This allows +- each CPU to perform simultaneous enqueue/dequeue operations. +- -mmio regions: queue operations, buffer mgmt +- -irqs: data availability, congestion notification, buffer ++ packets and do hardware buffer pool management operations. The DPAA2 ++ architecture separates the mechanism to access queues (the DPIO object) ++ from the queues themselves. The DPIO provides an MMIO interface to ++ enqueue/dequeue packets. To enqueue something a descriptor is written ++ to the DPIO MMIO region, which includes the target queue number. ++ There will typically be one DPIO assigned to each CPU. This allows all ++ CPUs to simultaneously perform enqueue/dequeued operations. DPIOs are ++ expected to be shared by different DPAA2 drivers. ++ -MMIO regions: queue operations, buffer management ++ -IRQs: data availability, congestion notification, buffer + pool depletion +- -commands: irq config, enable, reset ++ -commands: IRQ config, enable, reset + + -DPBP (Datapath Buffer Pool): represents a hardware buffer + pool. +- -mmio regions: none +- -irqs: none ++ -MMIO regions: none ++ -IRQs: none + -commands: enable, reset + + -DPMCP (Datapath MC Portal): provides an MC command portal. + Used by drivers to send commands to the MC to manage + objects. +- -mmio regions: MC command portal +- -irqs: command completion +- -commands: irq config, enable, reset ++ -MMIO regions: MC command portal ++ -IRQs: command completion ++ -commands: IRQ config, enable, reset + + Object Connections + ------------------ +@@ -268,22 +278,22 @@ of each driver follows. + | Stack | + +------------+ +------------+ + | Allocator |. . . . . . . | Ethernet | +- |(dpmcp,dpbp)| | (dpni) | ++ |(DPMCP,DPBP)| | (DPNI) | + +-.----------+ +---+---+----+ + . . ^ | + . . | | dequeue> + +-------------+ . | | + | DPRC driver | . +---+---V----+ +---------+ +- | (dprc) | . . . . . .| DPIO driver| | MAC | +- +----------+--+ | (dpio) | | (dpmac) | ++ | (DPRC) | . . . . . .| DPIO driver| | MAC | ++ +----------+--+ | (DPIO) | | (DPMAC) | + | +------+-----+ +-----+---+ + | | | + | | | + +----+--------------+ | +--+---+ +- | mc-bus driver | | | PHY | ++ | MC-bus driver | | | PHY | + | | | |driver| +- | /fsl-mc@80c000000 | | +--+---+ ++ | /soc/fsl-mc | | +--+---+ + +-------------------+ | | + | | + ================================ HARDWARE =========|=================|====== +@@ -298,25 +308,27 @@ of each driver follows. + + A brief description of each driver is provided below. + +- mc-bus driver ++ MC-bus driver + ------------- +- The mc-bus driver is a platform driver and is probed from an +- "/fsl-mc@xxxx" node in the device tree passed in by boot firmware. +- It is responsible for bootstrapping the DPAA2 kernel infrastructure. ++ The MC-bus driver is a platform driver and is probed from a ++ node in the device tree (compatible "fsl,qoriq-mc") passed in by boot ++ firmware. It is responsible for bootstrapping the DPAA2 kernel ++ infrastructure. + Key functions include: + -registering a new bus type named "fsl-mc" with the kernel, + and implementing bus call-backs (e.g. match/uevent/dev_groups) +- -implemeting APIs for DPAA2 driver registration and for device ++ -implementing APIs for DPAA2 driver registration and for device + add/remove +- -creates an MSI irq domain +- -do a device add of the 'root' DPRC device, which is needed +- to bootstrap things ++ -creates an MSI IRQ domain ++ -doing a 'device add' to expose the 'root' DPRC, in turn triggering ++ a bind of the root DPRC to the DPRC driver + + DPRC driver + ----------- +- The dprc-driver is bound DPRC objects and does runtime management ++ The DPRC driver is bound to DPRC objects and does runtime management + of a bus instance. It performs the initial bus scan of the DPRC +- and handles interrupts for container events such as hot plug. ++ and handles interrupts for container events such as hot plug by ++ re-scanning the DPRC. + + Allocator + ---------- +@@ -334,14 +346,20 @@ A brief description of each driver is pr + DPIO driver + ----------- + The DPIO driver is bound to DPIO objects and provides services that allow +- other drivers such as the Ethernet driver to receive and transmit data. ++ other drivers such as the Ethernet driver to enqueue and dequeue data for ++ their respective objects. + Key services include: + -data availability notifications + -hardware queuing operations (enqueue and dequeue of data) + -hardware buffer pool management + ++ To transmit a packet the Ethernet driver puts data on a queue and ++ invokes a DPIO API. For receive, the Ethernet driver registers ++ a data availability notification callback. To dequeue a packet ++ a DPIO API is used. ++ + There is typically one DPIO object per physical CPU for optimum +- performance, allowing each CPU to simultaneously enqueue ++ performance, allowing different CPUs to simultaneously enqueue + and dequeue data. + + The DPIO driver operates on behalf of all DPAA2 drivers +@@ -362,3 +380,7 @@ A brief description of each driver is pr + by the appropriate PHY driver via an mdio bus. The MAC driver + plays a role of being a proxy between the PHY driver and the + MC. It does this proxy via the MC commands to a DPMAC object. ++ If the PHY driver signals a link change, the MAC driver notifies ++ the MC via a DPMAC command. If a network interface is brought ++ up or down, the MC notifies the DPMAC driver via an interrupt and ++ the driver can take appropriate action. diff --git a/target/linux/layerscape/patches-4.4/7167-staging-fsl-mc-update-dpmcp-binary-interface-to-v3.0.patch b/target/linux/layerscape/patches-4.4/7167-staging-fsl-mc-update-dpmcp-binary-interface-to-v3.0.patch new file mode 100644 index 0000000000..b759606140 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7167-staging-fsl-mc-update-dpmcp-binary-interface-to-v3.0.patch @@ -0,0 +1,123 @@ +From fa245614c92ffbdaec6a56552032432b5343b1dc Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Mon, 11 Apr 2016 11:48:48 -0500 +Subject: [PATCH 167/226] staging: fsl-mc: update dpmcp binary interface to + v3.0 + +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dpmcp-cmd.h | 5 ++--- + drivers/staging/fsl-mc/bus/dpmcp.c | 35 ++------------------------------ + drivers/staging/fsl-mc/bus/dpmcp.h | 10 ++------- + 3 files changed, 6 insertions(+), 44 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dpmcp-cmd.h ++++ b/drivers/staging/fsl-mc/bus/dpmcp-cmd.h +@@ -33,8 +33,8 @@ + #define _FSL_DPMCP_CMD_H + + /* DPMCP Version */ +-#define DPMCP_VER_MAJOR 2 +-#define DPMCP_VER_MINOR 1 ++#define DPMCP_VER_MAJOR 3 ++#define DPMCP_VER_MINOR 0 + + /* Command IDs */ + #define DPMCP_CMDID_CLOSE 0x800 +@@ -52,6 +52,5 @@ + #define DPMCP_CMDID_SET_IRQ_MASK 0x014 + #define DPMCP_CMDID_GET_IRQ_MASK 0x015 + #define DPMCP_CMDID_GET_IRQ_STATUS 0x016 +-#define DPMCP_CMDID_CLEAR_IRQ_STATUS 0x017 + + #endif /* _FSL_DPMCP_CMD_H */ +--- a/drivers/staging/fsl-mc/bus/dpmcp.c ++++ b/drivers/staging/fsl-mc/bus/dpmcp.c +@@ -213,7 +213,7 @@ int dpmcp_set_irq(struct fsl_mc_io *mc_i + cmd.params[0] |= mc_enc(0, 8, irq_index); + cmd.params[0] |= mc_enc(32, 32, irq_cfg->val); + cmd.params[1] |= mc_enc(0, 64, irq_cfg->paddr); +- cmd.params[2] |= mc_enc(0, 32, irq_cfg->user_irq_id); ++ cmd.params[2] |= mc_enc(0, 32, irq_cfg->irq_num); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +@@ -254,7 +254,7 @@ int dpmcp_get_irq(struct fsl_mc_io *mc_i + /* retrieve response parameters */ + irq_cfg->val = (u32)mc_dec(cmd.params[0], 0, 32); + irq_cfg->paddr = (u64)mc_dec(cmd.params[1], 0, 64); +- irq_cfg->user_irq_id = (int)mc_dec(cmd.params[2], 0, 32); ++ irq_cfg->irq_num = (int)mc_dec(cmd.params[2], 0, 32); + *type = (int)mc_dec(cmd.params[2], 32, 32); + return 0; + } +@@ -435,37 +435,6 @@ int dpmcp_get_irq_status(struct fsl_mc_i + } + + /** +- * dpmcp_clear_irq_status() - Clear a pending interrupt's status +- * +- * @mc_io: Pointer to MC portal's I/O object +- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' +- * @token: Token of DPMCP object +- * @irq_index: The interrupt index to configure +- * @status: Bits to clear (W1C) - one bit per cause: +- * 0 = don't change +- * 1 = clear status bit +- * +- * Return: '0' on Success; Error code otherwise. +- */ +-int dpmcp_clear_irq_status(struct fsl_mc_io *mc_io, +- u32 cmd_flags, +- u16 token, +- u8 irq_index, +- u32 status) +-{ +- struct mc_command cmd = { 0 }; +- +- /* prepare command */ +- cmd.header = mc_encode_cmd_header(DPMCP_CMDID_CLEAR_IRQ_STATUS, +- cmd_flags, token); +- cmd.params[0] |= mc_enc(0, 32, status); +- cmd.params[0] |= mc_enc(32, 8, irq_index); +- +- /* send command to mc*/ +- return mc_send_command(mc_io, &cmd); +-} +- +-/** + * dpmcp_get_attributes - Retrieve DPMCP attributes. + * + * @mc_io: Pointer to MC portal's I/O object +--- a/drivers/staging/fsl-mc/bus/dpmcp.h ++++ b/drivers/staging/fsl-mc/bus/dpmcp.h +@@ -82,12 +82,12 @@ int dpmcp_reset(struct fsl_mc_io *mc_io, + * struct dpmcp_irq_cfg - IRQ configuration + * @paddr: Address that must be written to signal a message-based interrupt + * @val: Value to write into irq_addr address +- * @user_irq_id: A user defined number associated with this IRQ ++ * @irq_num: A user defined number associated with this IRQ + */ + struct dpmcp_irq_cfg { + uint64_t paddr; + uint32_t val; +- int user_irq_id; ++ int irq_num; + }; + + int dpmcp_set_irq(struct fsl_mc_io *mc_io, +@@ -133,12 +133,6 @@ int dpmcp_get_irq_status(struct fsl_mc_i + uint8_t irq_index, + uint32_t *status); + +-int dpmcp_clear_irq_status(struct fsl_mc_io *mc_io, +- uint32_t cmd_flags, +- uint16_t token, +- uint8_t irq_index, +- uint32_t status); +- + /** + * struct dpmcp_attr - Structure representing DPMCP attributes + * @id: DPMCP object ID diff --git a/target/linux/layerscape/patches-4.4/7168-staging-fsl-mc-update-dpbp-binary-interface-to-v2.2.patch b/target/linux/layerscape/patches-4.4/7168-staging-fsl-mc-update-dpbp-binary-interface-to-v2.2.patch new file mode 100644 index 0000000000..474baf42be --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7168-staging-fsl-mc-update-dpbp-binary-interface-to-v2.2.patch @@ -0,0 +1,208 @@ +From de0fa9842d52e4e80576d378f32aa9ca76a4270b Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Mon, 11 Apr 2016 11:48:54 -0500 +Subject: [PATCH 168/226] staging: fsl-mc: update dpbp binary interface to + v2.2 + +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dpbp.c | 77 ++++++++++++++++++++++++++++- + drivers/staging/fsl-mc/include/dpbp-cmd.h | 4 +- + drivers/staging/fsl-mc/include/dpbp.h | 51 ++++++++++++++++++- + 3 files changed, 127 insertions(+), 5 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dpbp.c ++++ b/drivers/staging/fsl-mc/bus/dpbp.c +@@ -293,7 +293,7 @@ int dpbp_set_irq(struct fsl_mc_io *mc_io + cmd.params[0] |= mc_enc(0, 8, irq_index); + cmd.params[0] |= mc_enc(32, 32, irq_cfg->val); + cmd.params[1] |= mc_enc(0, 64, irq_cfg->addr); +- cmd.params[2] |= mc_enc(0, 32, irq_cfg->user_irq_id); ++ cmd.params[2] |= mc_enc(0, 32, irq_cfg->irq_num); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +@@ -334,7 +334,7 @@ int dpbp_get_irq(struct fsl_mc_io *mc_io + /* retrieve response parameters */ + irq_cfg->val = (u32)mc_dec(cmd.params[0], 0, 32); + irq_cfg->addr = (u64)mc_dec(cmd.params[1], 0, 64); +- irq_cfg->user_irq_id = (int)mc_dec(cmd.params[2], 0, 32); ++ irq_cfg->irq_num = (int)mc_dec(cmd.params[2], 0, 32); + *type = (int)mc_dec(cmd.params[2], 32, 32); + return 0; + } +@@ -502,6 +502,7 @@ int dpbp_get_irq_status(struct fsl_mc_io + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPBP_CMDID_GET_IRQ_STATUS, + cmd_flags, token); ++ cmd.params[0] |= mc_enc(0, 32, *status); + cmd.params[0] |= mc_enc(32, 8, irq_index); + + /* send command to mc*/ +@@ -580,3 +581,75 @@ int dpbp_get_attributes(struct fsl_mc_io + return 0; + } + EXPORT_SYMBOL(dpbp_get_attributes); ++ ++/** ++ * dpbp_set_notifications() - Set notifications towards software ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPBP object ++ * @cfg: notifications configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpbp_set_notifications(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpbp_notification_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPBP_CMDID_SET_NOTIFICATIONS, ++ cmd_flags, ++ token); ++ ++ cmd.params[0] |= mc_enc(0, 32, cfg->depletion_entry); ++ cmd.params[0] |= mc_enc(32, 32, cfg->depletion_exit); ++ cmd.params[1] |= mc_enc(0, 32, cfg->surplus_entry); ++ cmd.params[1] |= mc_enc(32, 32, cfg->surplus_exit); ++ cmd.params[2] |= mc_enc(0, 16, cfg->options); ++ cmd.params[3] |= mc_enc(0, 64, cfg->message_ctx); ++ cmd.params[4] |= mc_enc(0, 64, cfg->message_iova); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++/** ++ * dpbp_get_notifications() - Get the notifications configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPBP object ++ * @cfg: notifications configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpbp_get_notifications(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpbp_notification_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPBP_CMDID_GET_NOTIFICATIONS, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ cfg->depletion_entry = (u32)mc_dec(cmd.params[0], 0, 32); ++ cfg->depletion_exit = (u32)mc_dec(cmd.params[0], 32, 32); ++ cfg->surplus_entry = (u32)mc_dec(cmd.params[1], 0, 32); ++ cfg->surplus_exit = (u32)mc_dec(cmd.params[1], 32, 32); ++ cfg->options = (u16)mc_dec(cmd.params[2], 0, 16); ++ cfg->message_ctx = (u64)mc_dec(cmd.params[3], 0, 64); ++ cfg->message_iova = (u64)mc_dec(cmd.params[4], 0, 64); ++ ++ return 0; ++} +--- a/drivers/staging/fsl-mc/include/dpbp-cmd.h ++++ b/drivers/staging/fsl-mc/include/dpbp-cmd.h +@@ -34,7 +34,7 @@ + + /* DPBP Version */ + #define DPBP_VER_MAJOR 2 +-#define DPBP_VER_MINOR 1 ++#define DPBP_VER_MINOR 2 + + /* Command IDs */ + #define DPBP_CMDID_CLOSE 0x800 +@@ -57,4 +57,6 @@ + #define DPBP_CMDID_GET_IRQ_STATUS 0x016 + #define DPBP_CMDID_CLEAR_IRQ_STATUS 0x017 + ++#define DPBP_CMDID_SET_NOTIFICATIONS 0x01b0 ++#define DPBP_CMDID_GET_NOTIFICATIONS 0x01b1 + #endif /* _FSL_DPBP_CMD_H */ +--- a/drivers/staging/fsl-mc/include/dpbp.h ++++ b/drivers/staging/fsl-mc/include/dpbp.h +@@ -85,12 +85,12 @@ int dpbp_reset(struct fsl_mc_io *mc_io, + * struct dpbp_irq_cfg - IRQ configuration + * @addr: Address that must be written to signal a message-based interrupt + * @val: Value to write into irq_addr address +- * @user_irq_id: A user defined number associated with this IRQ ++ * @irq_num: A user defined number associated with this IRQ + */ + struct dpbp_irq_cfg { + u64 addr; + u32 val; +- int user_irq_id; ++ int irq_num; + }; + + int dpbp_set_irq(struct fsl_mc_io *mc_io, +@@ -168,6 +168,53 @@ int dpbp_get_attributes(struct fsl_mc_io + u16 token, + struct dpbp_attr *attr); + ++/** ++ * DPBP notifications options ++ */ ++ ++/** ++ * BPSCN write will attempt to allocate into a cache (coherent write) ++ */ ++#define DPBP_NOTIF_OPT_COHERENT_WRITE 0x00000001 ++ ++/** ++ * struct dpbp_notification_cfg - Structure representing DPBP notifications ++ * towards software ++ * @depletion_entry: below this threshold the pool is "depleted"; ++ * set it to '0' to disable it ++ * @depletion_exit: greater than or equal to this threshold the pool exit its ++ * "depleted" state ++ * @surplus_entry: above this threshold the pool is in "surplus" state; ++ * set it to '0' to disable it ++ * @surplus_exit: less than or equal to this threshold the pool exit its ++ * "surplus" state ++ * @message_iova: MUST be given if either 'depletion_entry' or 'surplus_entry' ++ * is not '0' (enable); I/O virtual address (must be in DMA-able memory), ++ * must be 16B aligned. ++ * @message_ctx: The context that will be part of the BPSCN message and will ++ * be written to 'message_iova' ++ * @options: Mask of available options; use 'DPBP_NOTIF_OPT_' values ++ */ ++struct dpbp_notification_cfg { ++ u32 depletion_entry; ++ u32 depletion_exit; ++ u32 surplus_entry; ++ u32 surplus_exit; ++ u64 message_iova; ++ u64 message_ctx; ++ u16 options; ++}; ++ ++int dpbp_set_notifications(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpbp_notification_cfg *cfg); ++ ++int dpbp_get_notifications(struct fsl_mc_io *mc_io, ++ u32 cmd_flags, ++ u16 token, ++ struct dpbp_notification_cfg *cfg); ++ + /** @} */ + + #endif /* __FSL_DPBP_H */ diff --git a/target/linux/layerscape/patches-4.4/7169-staging-fsl-mc-update-dprc-binary-interface-to-v5.1.patch b/target/linux/layerscape/patches-4.4/7169-staging-fsl-mc-update-dprc-binary-interface-to-v5.1.patch new file mode 100644 index 0000000000..4db299803d --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7169-staging-fsl-mc-update-dprc-binary-interface-to-v5.1.patch @@ -0,0 +1,206 @@ +From 45dce4cd82ddc618ade56747620a2a29f7d9a99d Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Mon, 11 Apr 2016 11:48:59 -0500 +Subject: [PATCH 169/226] staging: fsl-mc: update dprc binary interface to + v5.1 + +The meaning of the "status" parameter in dprc_get_irq_status +has changed, and this patch updates the flib and caller +of the API. + +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-cmd.h | 4 ++-- + drivers/staging/fsl-mc/bus/dprc-driver.c | 1 + + drivers/staging/fsl-mc/bus/dprc.c | 26 +++++++++++++------------- + drivers/staging/fsl-mc/bus/mc-msi.c | 2 +- + drivers/staging/fsl-mc/include/dprc.h | 19 ++++++++++++------- + 5 files changed, 29 insertions(+), 23 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-cmd.h ++++ b/drivers/staging/fsl-mc/bus/dprc-cmd.h +@@ -41,8 +41,8 @@ + #define _FSL_DPRC_CMD_H + + /* DPRC Version */ +-#define DPRC_VER_MAJOR 4 +-#define DPRC_VER_MINOR 0 ++#define DPRC_VER_MAJOR 5 ++#define DPRC_VER_MINOR 1 + + /* Command IDs */ + #define DPRC_CMDID_CLOSE 0x800 +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -423,6 +423,7 @@ static irqreturn_t dprc_irq0_handler_thr + if (WARN_ON(!msi_desc || msi_desc->irq != (u32)irq_num)) + goto out; + ++ status = 0; + error = dprc_get_irq_status(mc_io, 0, mc_dev->mc_handle, 0, + &status); + if (error < 0) { +--- a/drivers/staging/fsl-mc/bus/dprc.c ++++ b/drivers/staging/fsl-mc/bus/dprc.c +@@ -265,7 +265,7 @@ int dprc_get_irq(struct fsl_mc_io *mc_io + /* retrieve response parameters */ + irq_cfg->val = mc_dec(cmd.params[0], 0, 32); + irq_cfg->paddr = mc_dec(cmd.params[1], 0, 64); +- irq_cfg->user_irq_id = mc_dec(cmd.params[2], 0, 32); ++ irq_cfg->irq_num = mc_dec(cmd.params[2], 0, 32); + *type = mc_dec(cmd.params[2], 32, 32); + + return 0; +@@ -296,7 +296,7 @@ int dprc_set_irq(struct fsl_mc_io *mc_io + cmd.params[0] |= mc_enc(32, 8, irq_index); + cmd.params[0] |= mc_enc(0, 32, irq_cfg->val); + cmd.params[1] |= mc_enc(0, 64, irq_cfg->paddr); +- cmd.params[2] |= mc_enc(0, 32, irq_cfg->user_irq_id); ++ cmd.params[2] |= mc_enc(0, 32, irq_cfg->irq_num); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +@@ -466,6 +466,7 @@ int dprc_get_irq_status(struct fsl_mc_io + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPRC_CMDID_GET_IRQ_STATUS, + cmd_flags, token); ++ cmd.params[0] |= mc_enc(0, 32, *status); + cmd.params[0] |= mc_enc(32, 8, irq_index); + + /* send command to mc*/ +@@ -948,6 +949,7 @@ int dprc_get_obj(struct fsl_mc_io *mc_io + obj_desc->state = mc_dec(cmd.params[1], 32, 32); + obj_desc->ver_major = mc_dec(cmd.params[2], 0, 16); + obj_desc->ver_minor = mc_dec(cmd.params[2], 16, 16); ++ obj_desc->flags = mc_dec(cmd.params[2], 32, 16); + obj_desc->type[0] = mc_dec(cmd.params[3], 0, 8); + obj_desc->type[1] = mc_dec(cmd.params[3], 8, 8); + obj_desc->type[2] = mc_dec(cmd.params[3], 16, 8); +@@ -1042,6 +1044,7 @@ int dprc_get_obj_desc(struct fsl_mc_io * + obj_desc->state = (u32)mc_dec(cmd.params[1], 32, 32); + obj_desc->ver_major = (u16)mc_dec(cmd.params[2], 0, 16); + obj_desc->ver_minor = (u16)mc_dec(cmd.params[2], 16, 16); ++ obj_desc->flags = mc_dec(cmd.params[2], 32, 16); + obj_desc->type[0] = (char)mc_dec(cmd.params[3], 0, 8); + obj_desc->type[1] = (char)mc_dec(cmd.params[3], 8, 8); + obj_desc->type[2] = (char)mc_dec(cmd.params[3], 16, 8); +@@ -1108,7 +1111,7 @@ int dprc_set_obj_irq(struct fsl_mc_io *m + cmd.params[0] |= mc_enc(32, 8, irq_index); + cmd.params[0] |= mc_enc(0, 32, irq_cfg->val); + cmd.params[1] |= mc_enc(0, 64, irq_cfg->paddr); +- cmd.params[2] |= mc_enc(0, 32, irq_cfg->user_irq_id); ++ cmd.params[2] |= mc_enc(0, 32, irq_cfg->irq_num); + cmd.params[2] |= mc_enc(32, 32, obj_id); + cmd.params[3] |= mc_enc(0, 8, obj_type[0]); + cmd.params[3] |= mc_enc(8, 8, obj_type[1]); +@@ -1189,7 +1192,7 @@ int dprc_get_obj_irq(struct fsl_mc_io *m + /* retrieve response parameters */ + irq_cfg->val = (u32)mc_dec(cmd.params[0], 0, 32); + irq_cfg->paddr = (u64)mc_dec(cmd.params[1], 0, 64); +- irq_cfg->user_irq_id = (int)mc_dec(cmd.params[2], 0, 32); ++ irq_cfg->irq_num = (int)mc_dec(cmd.params[2], 0, 32); + *type = (int)mc_dec(cmd.params[2], 32, 32); + + return 0; +@@ -1437,14 +1440,8 @@ EXPORT_SYMBOL(dprc_set_obj_label); + * @endpoint1: Endpoint 1 configuration parameters + * @endpoint2: Endpoint 2 configuration parameters + * @cfg: Connection configuration. The connection configuration is ignored for +- * connections made to DPMAC objects, where rate is set according to +- * MAC configuration. +- * The committed rate is the guaranteed rate for the connection. +- * The maximum rate is an upper limit allowed for the connection; it is +- * expected to be equal or higher than the committed rate. +- * When committed and maximum rates are both zero, the connection is set +- * to "best effort" mode, having lower priority compared to connections +- * with committed or maximum rates. ++ * connections made to DPMAC objects, where rate is retrieved from the ++ * MAC configuration. + * + * Return: '0' on Success; Error code otherwise. + */ +@@ -1555,7 +1552,10 @@ int dprc_disconnect(struct fsl_mc_io *mc + * @token: Token of DPRC object + * @endpoint1: Endpoint 1 configuration parameters + * @endpoint2: Returned endpoint 2 configuration parameters +-* @state: Returned link state: 1 - link is up, 0 - link is down ++* @state: Returned link state: ++* 1 - link is up; ++* 0 - link is down; ++* -1 - no connection (endpoint2 information is irrelevant) + * + * Return: '0' on Success; -ENAVAIL if connection does not exist. + */ +--- a/drivers/staging/fsl-mc/bus/mc-msi.c ++++ b/drivers/staging/fsl-mc/bus/mc-msi.c +@@ -65,7 +65,7 @@ static void __fsl_mc_msi_write_msg(struc + irq_cfg.paddr = ((u64)msi_desc->msg.address_hi << 32) | + msi_desc->msg.address_lo; + irq_cfg.val = msi_desc->msg.data; +- irq_cfg.user_irq_id = msi_desc->irq; ++ irq_cfg.irq_num = msi_desc->irq; + + if (owner_mc_dev == mc_bus_dev) { + /* +--- a/drivers/staging/fsl-mc/include/dprc.h ++++ b/drivers/staging/fsl-mc/include/dprc.h +@@ -94,11 +94,6 @@ int dprc_close(struct fsl_mc_io *mc_io, + */ + #define DPRC_CFG_OPT_TOPOLOGY_CHANGES_ALLOWED 0x00000008 + +-/* IOMMU bypass - indicates whether objects of this container are permitted +- * to bypass the IOMMU. +- */ +-#define DPRC_CFG_OPT_IOMMU_BYPASS 0x00000010 +- + /* AIOP - Indicates that container belongs to AIOP. */ + #define DPRC_CFG_OPT_AIOP 0x00000020 + +@@ -173,12 +168,12 @@ int dprc_reset_container(struct fsl_mc_i + * struct dprc_irq_cfg - IRQ configuration + * @paddr: Address that must be written to signal a message-based interrupt + * @val: Value to write into irq_addr address +- * @user_irq_id: A user defined number associated with this IRQ ++ * @irq_num: A user defined number associated with this IRQ + */ + struct dprc_irq_cfg { + phys_addr_t paddr; + u32 val; +- int user_irq_id; ++ int irq_num; + }; + + int dprc_set_irq(struct fsl_mc_io *mc_io, +@@ -353,6 +348,14 @@ int dprc_get_obj_count(struct fsl_mc_io + #define DPRC_OBJ_STATE_PLUGGED 0x00000002 + + /** ++ * Shareability flag - Object flag indicating no memory shareability. ++ * the object generates memory accesses that are non coherent with other ++ * masters; ++ * user is responsible for proper memory handling through IOMMU configuration. ++ */ ++#define DPRC_OBJ_FLAG_NO_MEM_SHAREABILITY 0x0001 ++ ++/** + * struct dprc_obj_desc - Object descriptor, returned from dprc_get_obj() + * @type: Type of object: NULL terminated string + * @id: ID of logical object resource +@@ -363,6 +366,7 @@ int dprc_get_obj_count(struct fsl_mc_io + * @region_count: Number of mappable regions supported by the object + * @state: Object state: combination of DPRC_OBJ_STATE_ states + * @label: Object label ++ * @flags: Object's flags + */ + struct dprc_obj_desc { + char type[16]; +@@ -374,6 +378,7 @@ struct dprc_obj_desc { + u8 region_count; + u32 state; + char label[16]; ++ u16 flags; + }; + + int dprc_get_obj(struct fsl_mc_io *mc_io, diff --git a/target/linux/layerscape/patches-4.4/7170-staging-fsl-mc-don-t-use-object-versions-to-make-bin.patch b/target/linux/layerscape/patches-4.4/7170-staging-fsl-mc-don-t-use-object-versions-to-make-bin.patch new file mode 100644 index 0000000000..2224d457e8 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7170-staging-fsl-mc-don-t-use-object-versions-to-make-bin.patch @@ -0,0 +1,136 @@ +From 9382e1723e4de9832407f7e65bd4812b31e5a51d Mon Sep 17 00:00:00 2001 +From: Itai Katz +Date: Mon, 11 Apr 2016 11:55:40 -0500 +Subject: [PATCH 170/226] staging: fsl-mc: don't use object versions to make + binding decisions + +Up until now if the object version expected by a driver (in the API header +file) did not match the actual object version in the MC hardware the bus +driver refused to bind the object to the driver or printed out WARN_ON +dumps. + +This patch removes those checks, and the responsibility of object version +checking should now be done in the object drivers themselves. If the actual +version discovered is not supported, the driver's probe function should fail. +Drivers should use version checks to support new features and provide +backwards compatibility if at all possible. + +This patch also removes the checks that caused bus driver probing to fail +if the overall MC version discovered did not match the firmware version +from the API header...this was too strict. The overall MC version is +informational like a release number, and continues to be printed in the +boot log. + +Signed-off-by: Itai Katz +(Stuart: reworded commit log) +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 4 +-- + drivers/staging/fsl-mc/bus/mc-allocator.c | 6 ----- + drivers/staging/fsl-mc/bus/mc-bus.c | 38 +---------------------------- + 3 files changed, 2 insertions(+), 46 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -780,9 +780,7 @@ static int dprc_remove(struct fsl_mc_dev + static const struct fsl_mc_device_match_id match_id_table[] = { + { + .vendor = FSL_MC_VENDOR_FREESCALE, +- .obj_type = "dprc", +- .ver_major = DPRC_VER_MAJOR, +- .ver_minor = DPRC_VER_MINOR}, ++ .obj_type = "dprc"}, + {.vendor = 0x0}, + }; + +--- a/drivers/staging/fsl-mc/bus/mc-allocator.c ++++ b/drivers/staging/fsl-mc/bus/mc-allocator.c +@@ -709,20 +709,14 @@ static const struct fsl_mc_device_match_ + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dpbp", +- .ver_major = DPBP_VER_MAJOR, +- .ver_minor = DPBP_VER_MINOR + }, + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dpmcp", +- .ver_major = DPMCP_VER_MAJOR, +- .ver_minor = DPMCP_VER_MINOR + }, + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dpcon", +- .ver_major = DPCON_VER_MAJOR, +- .ver_minor = DPCON_VER_MINOR + }, + {.vendor = 0x0}, + }; +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -40,8 +40,6 @@ static int fsl_mc_bus_match(struct devic + struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); + struct fsl_mc_driver *mc_drv = to_fsl_mc_driver(drv); + bool found = false; +- bool major_version_mismatch = false; +- bool minor_version_mismatch = false; + + if (WARN_ON(!fsl_mc_bus_exists())) + goto out; +@@ -64,32 +62,12 @@ static int fsl_mc_bus_match(struct devic + for (id = mc_drv->match_id_table; id->vendor != 0x0; id++) { + if (id->vendor == mc_dev->obj_desc.vendor && + strcmp(id->obj_type, mc_dev->obj_desc.type) == 0) { +- if (id->ver_major == mc_dev->obj_desc.ver_major) { +- found = true; +- if (id->ver_minor != mc_dev->obj_desc.ver_minor) +- minor_version_mismatch = true; +- } else { +- major_version_mismatch = true; +- } ++ found = true; + + break; + } + } + +- if (major_version_mismatch) { +- dev_warn(dev, +- "Major version mismatch: driver version %u.%u, MC object version %u.%u\n", +- id->ver_major, id->ver_minor, +- mc_dev->obj_desc.ver_major, +- mc_dev->obj_desc.ver_minor); +- } else if (minor_version_mismatch) { +- dev_warn(dev, +- "Minor version mismatch: driver version %u.%u, MC object version %u.%u\n", +- id->ver_major, id->ver_minor, +- mc_dev->obj_desc.ver_major, +- mc_dev->obj_desc.ver_minor); +- } +- + out: + dev_dbg(dev, "%smatched\n", found ? "" : "not "); + return found; +@@ -722,20 +700,6 @@ static int fsl_mc_bus_probe(struct platf + "Freescale Management Complex Firmware version: %u.%u.%u\n", + mc_version.major, mc_version.minor, mc_version.revision); + +- if (mc_version.major < MC_VER_MAJOR) { +- dev_err(&pdev->dev, +- "ERROR: MC firmware version not supported by driver (driver version: %u.%u)\n", +- MC_VER_MAJOR, MC_VER_MINOR); +- error = -ENOTSUPP; +- goto error_cleanup_mc_io; +- } +- +- if (mc_version.major > MC_VER_MAJOR) { +- dev_warn(&pdev->dev, +- "WARNING: driver may not support newer MC firmware features (driver version: %u.%u)\n", +- MC_VER_MAJOR, MC_VER_MINOR); +- } +- + error = get_mc_addr_translation_ranges(&pdev->dev, + &mc->translation_ranges, + &mc->num_translation_ranges); diff --git a/target/linux/layerscape/patches-4.4/7171-staging-fsl-mc-set-up-coherent-dma-ops-for-added-dev.patch b/target/linux/layerscape/patches-4.4/7171-staging-fsl-mc-set-up-coherent-dma-ops-for-added-dev.patch new file mode 100644 index 0000000000..d6de805e6a --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7171-staging-fsl-mc-set-up-coherent-dma-ops-for-added-dev.patch @@ -0,0 +1,29 @@ +From 3657147d6fea1977c07373325626bf50fe15bcfc Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Mon, 11 Apr 2016 11:49:13 -0500 +Subject: [PATCH 171/226] staging: fsl-mc: set up coherent dma ops for added + devices + +Unless discovered devices have the no shareability flag set, +set up coherent dma ops for them. + +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -469,6 +469,10 @@ int fsl_mc_device_add(struct dprc_obj_de + goto error_cleanup_dev; + } + ++ /* Objects are coherent, unless 'no shareability' flag set. */ ++ if (!(obj_desc->flags & DPRC_OBJ_FLAG_NO_MEM_SHAREABILITY)) ++ arch_setup_dma_ops(&mc_dev->dev, 0, 0, NULL, true); ++ + /* + * The device-specific probe callback will get invoked by device_add() + */ diff --git a/target/linux/layerscape/patches-4.4/7172-staging-fsl-mc-set-cacheable-flag-for-added-devices-.patch b/target/linux/layerscape/patches-4.4/7172-staging-fsl-mc-set-cacheable-flag-for-added-devices-.patch new file mode 100644 index 0000000000..7de34d19ea --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7172-staging-fsl-mc-set-cacheable-flag-for-added-devices-.patch @@ -0,0 +1,30 @@ +From f7011c18a26d40a07b837a79d0efdad795ad7250 Mon Sep 17 00:00:00 2001 +From: Itai Katz +Date: Mon, 11 Apr 2016 11:55:48 -0500 +Subject: [PATCH 172/226] staging: fsl-mc: set cacheable flag for added + devices if applicable + +Some DPAA2 devices have mmio regions that should be mapped as +cacheable by drivers. Set IORESOURCE_CACHEABLE in the region's +flags if applicable. + +Signed-off-by: Itai Katz +[Stuart: update subject and commit message] +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -354,6 +354,8 @@ static int fsl_mc_device_get_mmio_region + regions[i].end = regions[i].start + region_desc.size - 1; + regions[i].name = "fsl-mc object MMIO region"; + regions[i].flags = IORESOURCE_IO; ++ if (region_desc.flags & DPRC_REGION_CACHEABLE) ++ regions[i].flags |= IORESOURCE_CACHEABLE; + } + + mc_dev->regions = regions; diff --git a/target/linux/layerscape/patches-4.4/7173-staging-fsl-mc-get-version-of-root-dprc-from-MC-hard.patch b/target/linux/layerscape/patches-4.4/7173-staging-fsl-mc-get-version-of-root-dprc-from-MC-hard.patch new file mode 100644 index 0000000000..ade5b33c42 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7173-staging-fsl-mc-get-version-of-root-dprc-from-MC-hard.patch @@ -0,0 +1,106 @@ +From 2df13a365ecda7e3321cf9d4e1a9ebd63e58c28b Mon Sep 17 00:00:00 2001 +From: Itai Katz +Date: Mon, 11 Apr 2016 11:55:55 -0500 +Subject: [PATCH 173/226] staging: fsl-mc: get version of root dprc from MC + hardware + +The root dprc is discovered as a platform device in the device tree. The +version of that dprc was previously set using hardcoded values from the API +header in the kernel). This patch removes the use of the hardcoded version +numbers and instead reads the actual dprc version from the hardware. + +Signed-off-by: Itai Katz +(Stuart: resolved merge conflict, updated commit subject/log) +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 45 ++++++++++++++++++++++++++++------- + 1 file changed, 37 insertions(+), 8 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -229,11 +229,10 @@ static bool fsl_mc_is_root_dprc(struct d + return dev == root_dprc_dev; + } + +-static int get_dprc_icid(struct fsl_mc_io *mc_io, +- int container_id, u16 *icid) ++static int get_dprc_attr(struct fsl_mc_io *mc_io, ++ int container_id, struct dprc_attributes *attr) + { + u16 dprc_handle; +- struct dprc_attributes attr; + int error; + + error = dprc_open(mc_io, 0, container_id, &dprc_handle); +@@ -242,15 +241,14 @@ static int get_dprc_icid(struct fsl_mc_i + return error; + } + +- memset(&attr, 0, sizeof(attr)); +- error = dprc_get_attributes(mc_io, 0, dprc_handle, &attr); ++ memset(attr, 0, sizeof(struct dprc_attributes)); ++ error = dprc_get_attributes(mc_io, 0, dprc_handle, attr); + if (error < 0) { + dev_err(mc_io->dev, "dprc_get_attributes() failed: %d\n", + error); + goto common_cleanup; + } + +- *icid = attr.icid; + error = 0; + + common_cleanup: +@@ -258,6 +256,34 @@ common_cleanup: + return error; + } + ++static int get_dprc_icid(struct fsl_mc_io *mc_io, ++ int container_id, u16 *icid) ++{ ++ struct dprc_attributes attr; ++ int error; ++ ++ error = get_dprc_attr(mc_io, container_id, &attr); ++ if (error == 0) ++ *icid = attr.icid; ++ ++ return error; ++} ++ ++static int get_dprc_version(struct fsl_mc_io *mc_io, ++ int container_id, u16 *major, u16 *minor) ++{ ++ struct dprc_attributes attr; ++ int error; ++ ++ error = get_dprc_attr(mc_io, container_id, &attr); ++ if (error == 0) { ++ *major = attr.version.major; ++ *minor = attr.version.minor; ++ } ++ ++ return error; ++} ++ + static int translate_mc_addr(struct fsl_mc_device *mc_dev, + enum dprc_region_type mc_region_type, + u64 mc_offset, phys_addr_t *phys_addr) +@@ -719,11 +745,14 @@ static int fsl_mc_bus_probe(struct platf + goto error_cleanup_mc_io; + } + ++ error = get_dprc_version(mc_io, container_id, ++ &obj_desc.ver_major, &obj_desc.ver_minor); ++ if (error < 0) ++ goto error_cleanup_mc_io; ++ + obj_desc.vendor = FSL_MC_VENDOR_FREESCALE; + strcpy(obj_desc.type, "dprc"); + obj_desc.id = container_id; +- obj_desc.ver_major = DPRC_VER_MAJOR; +- obj_desc.ver_minor = DPRC_VER_MINOR; + obj_desc.irq_count = 1; + obj_desc.region_count = 0; + diff --git a/target/linux/layerscape/patches-4.4/7174-staging-fsl-mc-add-dprc-version-check.patch b/target/linux/layerscape/patches-4.4/7174-staging-fsl-mc-add-dprc-version-check.patch new file mode 100644 index 0000000000..a5ec35c667 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7174-staging-fsl-mc-add-dprc-version-check.patch @@ -0,0 +1,90 @@ +From 653898b483e5448084b15214a8c20959b418dbe7 Mon Sep 17 00:00:00 2001 +From: Itai Katz +Date: Mon, 11 Apr 2016 11:56:05 -0500 +Subject: [PATCH 174/226] staging: fsl-mc: add dprc version check + +The dprc driver supports dprc version 5.0 and above. +This patch adds the code to check the version. + +Signed-off-by: Itai Katz +(Stuart: resolved merge conflicts, split dpseci quirk into separate patch) +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-cmd.h | 6 +++--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 19 +++++++++++++++++++ + drivers/staging/fsl-mc/bus/mc-bus.c | 1 + + drivers/staging/fsl-mc/include/mc-private.h | 2 ++ + 4 files changed, 25 insertions(+), 3 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-cmd.h ++++ b/drivers/staging/fsl-mc/bus/dprc-cmd.h +@@ -40,9 +40,9 @@ + #ifndef _FSL_DPRC_CMD_H + #define _FSL_DPRC_CMD_H + +-/* DPRC Version */ +-#define DPRC_VER_MAJOR 5 +-#define DPRC_VER_MINOR 1 ++/* Minimal supported DPRC Version */ ++#define DPRC_MIN_VER_MAJOR 5 ++#define DPRC_MIN_VER_MINOR 0 + + /* Command IDs */ + #define DPRC_CMDID_CLOSE 0x800 +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -693,6 +693,25 @@ static int dprc_probe(struct fsl_mc_devi + goto error_cleanup_msi_domain; + } + ++ error = dprc_get_attributes(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ &mc_bus->dprc_attr); ++ if (error < 0) { ++ dev_err(&mc_dev->dev, "dprc_get_attributes() failed: %d\n", ++ error); ++ goto error_cleanup_open; ++ } ++ ++ if (mc_bus->dprc_attr.version.major < DPRC_MIN_VER_MAJOR || ++ (mc_bus->dprc_attr.version.major == DPRC_MIN_VER_MAJOR && ++ mc_bus->dprc_attr.version.minor < DPRC_MIN_VER_MINOR)) { ++ dev_err(&mc_dev->dev, ++ "ERROR: DPRC version %d.%d not supported\n", ++ mc_bus->dprc_attr.version.major, ++ mc_bus->dprc_attr.version.minor); ++ error = -ENOTSUPP; ++ goto error_cleanup_open; ++ } ++ + mutex_init(&mc_bus->scan_mutex); + + /* +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -745,6 +745,7 @@ static int fsl_mc_bus_probe(struct platf + goto error_cleanup_mc_io; + } + ++ memset(&obj_desc, 0, sizeof(struct dprc_obj_desc)); + error = get_dprc_version(mc_io, container_id, + &obj_desc.ver_major, &obj_desc.ver_minor); + if (error < 0) +--- a/drivers/staging/fsl-mc/include/mc-private.h ++++ b/drivers/staging/fsl-mc/include/mc-private.h +@@ -94,12 +94,14 @@ struct fsl_mc_resource_pool { + * from the physical DPRC. + * @irq_resources: Pointer to array of IRQ objects for the IRQ pool + * @scan_mutex: Serializes bus scanning ++ * @dprc_attr: DPRC attributes + */ + struct fsl_mc_bus { + struct fsl_mc_device mc_dev; + struct fsl_mc_resource_pool resource_pools[FSL_MC_NUM_POOL_TYPES]; + struct fsl_mc_device_irq *irq_resources; + struct mutex scan_mutex; /* serializes bus scanning */ ++ struct dprc_attributes dprc_attr; + }; + + #define to_fsl_mc_bus(_mc_dev) \ diff --git a/target/linux/layerscape/patches-4.4/7175-staging-fsl-mc-add-quirk-handling-for-dpseci-objects.patch b/target/linux/layerscape/patches-4.4/7175-staging-fsl-mc-add-quirk-handling-for-dpseci-objects.patch new file mode 100644 index 0000000000..36c6f89fc6 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7175-staging-fsl-mc-add-quirk-handling-for-dpseci-objects.patch @@ -0,0 +1,38 @@ +From 5366dc8896ca7cf028db73643860821b189a1dfd Mon Sep 17 00:00:00 2001 +From: Horia Geanta +Date: Mon, 11 Apr 2016 11:50:26 -0500 +Subject: [PATCH 175/226] staging: fsl-mc: add quirk handling for dpseci + objects < 4.0 + +dpseci objects < 4.0 are not coherent-- in spite of the fact +that the MC reports them to be coherent in certain versions. +Add a special case to set the no shareability flag for dpseci +objects < 4.0. + +Signed-off-by: Horia Geanta +(Stuart: reworded commit message, updated comment in patch) +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -312,6 +312,15 @@ int dprc_scan_objects(struct fsl_mc_devi + continue; + } + ++ /* ++ * add a quirk for all versions of dpsec < 4.0...none ++ * are coherent regardless of what the MC reports. ++ */ ++ if ((strcmp(obj_desc->type, "dpseci") == 0) && ++ (obj_desc->ver_major < 4)) ++ obj_desc->flags |= ++ DPRC_OBJ_FLAG_NO_MEM_SHAREABILITY; ++ + irq_count += obj_desc->irq_count; + dev_dbg(&mc_bus_dev->dev, + "Discovered object: type %s, id %d\n", diff --git a/target/linux/layerscape/patches-4.4/7176-staging-fsl-mc-add-dpmcp-version-check.patch b/target/linux/layerscape/patches-4.4/7176-staging-fsl-mc-add-dpmcp-version-check.patch new file mode 100644 index 0000000000..148a724c03 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7176-staging-fsl-mc-add-dpmcp-version-check.patch @@ -0,0 +1,56 @@ +From 035789ffb3b89b9764d7cc79d209a5795c18fa93 Mon Sep 17 00:00:00 2001 +From: Itai Katz +Date: Mon, 11 Apr 2016 11:56:11 -0500 +Subject: [PATCH 176/226] staging: fsl-mc: add dpmcp version check + +The dpmcp driver supports dpmcp version 3.0 and above. +This patch adds the code to check the version. + +Signed-off-by: Itai Katz +Signed-off-by: Stuart Yoder +Acked-by: German Rivera + + drivers/staging/fsl-mc/bus/dpmcp-cmd.h | 6 +++--- + drivers/staging/fsl-mc/bus/mc-allocator.c | 11 +++++++++++ + 2 files changed, 14 insertions(+), 3 deletions(-) +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dpmcp-cmd.h | 6 +++--- + drivers/staging/fsl-mc/bus/mc-allocator.c | 11 +++++++++++ + 2 files changed, 14 insertions(+), 3 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dpmcp-cmd.h ++++ b/drivers/staging/fsl-mc/bus/dpmcp-cmd.h +@@ -32,9 +32,9 @@ + #ifndef _FSL_DPMCP_CMD_H + #define _FSL_DPMCP_CMD_H + +-/* DPMCP Version */ +-#define DPMCP_VER_MAJOR 3 +-#define DPMCP_VER_MINOR 0 ++/* Minimal supported DPMCP Version */ ++#define DPMCP_MIN_VER_MAJOR 3 ++#define DPMCP_MIN_VER_MINOR 0 + + /* Command IDs */ + #define DPMCP_CMDID_CLOSE 0x800 +--- a/drivers/staging/fsl-mc/bus/mc-allocator.c ++++ b/drivers/staging/fsl-mc/bus/mc-allocator.c +@@ -297,6 +297,17 @@ int __must_check fsl_mc_portal_allocate( + if (WARN_ON(!dpmcp_dev)) + goto error_cleanup_resource; + ++ if (dpmcp_dev->obj_desc.ver_major < DPMCP_MIN_VER_MAJOR || ++ (dpmcp_dev->obj_desc.ver_major == DPMCP_MIN_VER_MAJOR && ++ dpmcp_dev->obj_desc.ver_minor < DPMCP_MIN_VER_MINOR)) { ++ dev_err(&dpmcp_dev->dev, ++ "ERROR: Version %d.%d of DPMCP not supported.\n", ++ dpmcp_dev->obj_desc.ver_major, ++ dpmcp_dev->obj_desc.ver_minor); ++ error = -ENOTSUPP; ++ goto error_cleanup_resource; ++ } ++ + if (WARN_ON(dpmcp_dev->obj_desc.region_count == 0)) + goto error_cleanup_resource; + diff --git a/target/linux/layerscape/patches-4.4/7177-staging-fsl-mc-return-EINVAL-for-all-fsl_mc_portal_a.patch b/target/linux/layerscape/patches-4.4/7177-staging-fsl-mc-return-EINVAL-for-all-fsl_mc_portal_a.patch new file mode 100644 index 0000000000..3a5a3f5646 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7177-staging-fsl-mc-return-EINVAL-for-all-fsl_mc_portal_a.patch @@ -0,0 +1,30 @@ +From 324147c1a6806301d9441a8d83c7c5ac880140cd Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Horia=20Geant=C4=83?= +Date: Mon, 11 Apr 2016 11:56:16 -0500 +Subject: [PATCH 177/226] staging: fsl-mc: return -EINVAL for all + fsl_mc_portal_allocate() failures +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +There are some error paths that allow for a NULL new_mc_io and err = 0 +return code. Return -EINVAL instead. + +Signed-off-by: Horia Geantă +Signed-off-by: Stuart Yoder +Acked-by: German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-allocator.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/staging/fsl-mc/bus/mc-allocator.c ++++ b/drivers/staging/fsl-mc/bus/mc-allocator.c +@@ -293,6 +293,7 @@ int __must_check fsl_mc_portal_allocate( + if (error < 0) + return error; + ++ error = -EINVAL; + dpmcp_dev = resource->data; + if (WARN_ON(!dpmcp_dev)) + goto error_cleanup_resource; diff --git a/target/linux/layerscape/patches-4.4/7178-staging-fsl-mc-bus-Drop-warning.patch b/target/linux/layerscape/patches-4.4/7178-staging-fsl-mc-bus-Drop-warning.patch new file mode 100644 index 0000000000..dae0a5701e --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7178-staging-fsl-mc-bus-Drop-warning.patch @@ -0,0 +1,47 @@ +From 9821898bbfa5a21254baafe19b3cc97516fc6019 Mon Sep 17 00:00:00 2001 +From: Matthias Brugger +Date: Thu, 14 Apr 2016 23:24:26 +0200 +Subject: [PATCH 178/226] staging: fsl-mc: bus: Drop warning + +When updating the irq_chip and msi_domain_ops, the code checkes for +already present functions. +When more then one ITS controller are present in the system, +irq_chip and msi_domain_ops got already set and a warning is invoked. + +This patch deletes the warning, as the funtions are just already set to +the needed callbacks. + +Signed-off-by: Matthias Brugger +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-msi.c | 12 ++++-------- + 1 file changed, 4 insertions(+), 8 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-msi.c ++++ b/drivers/staging/fsl-mc/bus/mc-msi.c +@@ -37,10 +37,8 @@ static void fsl_mc_msi_update_dom_ops(st + /* + * set_desc should not be set by the caller + */ +- if (WARN_ON(ops->set_desc)) +- return; +- +- ops->set_desc = fsl_mc_msi_set_desc; ++ if (ops->set_desc == NULL) ++ ops->set_desc = fsl_mc_msi_set_desc; + } + + static void __fsl_mc_msi_write_msg(struct fsl_mc_device *mc_bus_dev, +@@ -129,10 +127,8 @@ static void fsl_mc_msi_update_chip_ops(s + /* + * irq_write_msi_msg should not be set by the caller + */ +- if (WARN_ON(chip->irq_write_msi_msg)) +- return; +- +- chip->irq_write_msi_msg = fsl_mc_msi_write_msg; ++ if (chip->irq_write_msi_msg == NULL) ++ chip->irq_write_msi_msg = fsl_mc_msi_write_msg; + } + + /** diff --git a/target/linux/layerscape/patches-4.4/7179-staging-fsl-mc-add-support-for-the-modalias-sysfs-at.patch b/target/linux/layerscape/patches-4.4/7179-staging-fsl-mc-add-support-for-the-modalias-sysfs-at.patch new file mode 100644 index 0000000000..030c195f76 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7179-staging-fsl-mc-add-support-for-the-modalias-sysfs-at.patch @@ -0,0 +1,54 @@ +From 227c693741ce1fbf0ad146c87f03369334941f2e Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 22 Jun 2016 16:40:42 -0500 +Subject: [PATCH 179/226] staging: fsl-mc: add support for the modalias sysfs + attribute + +In order to support uevent based module loading implement modalias support +for the fsl-mc bus driver. Aliases are based on vendor and object/device +id and are of the form "fsl-mc:vNdN". + +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 25 +++++++++++++++++++++++++ + 1 file changed, 25 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -82,10 +82,35 @@ static int fsl_mc_bus_uevent(struct devi + return 0; + } + ++static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); ++ ++ return sprintf(buf, "fsl-mc:v%08Xd%s\n", mc_dev->obj_desc.vendor, ++ mc_dev->obj_desc.type); ++} ++static DEVICE_ATTR_RO(modalias); ++ ++static struct attribute *fsl_mc_dev_attrs[] = { ++ &dev_attr_modalias.attr, ++ NULL, ++}; ++ ++static const struct attribute_group fsl_mc_dev_group = { ++ .attrs = fsl_mc_dev_attrs, ++}; ++ ++static const struct attribute_group *fsl_mc_dev_groups[] = { ++ &fsl_mc_dev_group, ++ NULL, ++}; ++ + struct bus_type fsl_mc_bus_type = { + .name = "fsl-mc", + .match = fsl_mc_bus_match, + .uevent = fsl_mc_bus_uevent, ++ .dev_groups = fsl_mc_dev_groups, + }; + EXPORT_SYMBOL_GPL(fsl_mc_bus_type); + diff --git a/target/linux/layerscape/patches-4.4/7180-staging-fsl-mc-implement-uevent-callback-and-set-the.patch b/target/linux/layerscape/patches-4.4/7180-staging-fsl-mc-implement-uevent-callback-and-set-the.patch new file mode 100644 index 0000000000..266219b8a8 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7180-staging-fsl-mc-implement-uevent-callback-and-set-the.patch @@ -0,0 +1,32 @@ +From 721966c3990bc4596c6270afc1ea68c756b72f0d Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 22 Jun 2016 16:40:43 -0500 +Subject: [PATCH 180/226] staging: fsl-mc: implement uevent callback and set + the modalias + +Replace placeholder code in the uevent callback to properly +set the MODALIAS env variable. + +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -78,7 +78,13 @@ out: + */ + static int fsl_mc_bus_uevent(struct device *dev, struct kobj_uevent_env *env) + { +- pr_debug("%s invoked\n", __func__); ++ struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); ++ ++ if (add_uevent_var(env, "MODALIAS=fsl-mc:v%08Xd%s", ++ mc_dev->obj_desc.vendor, ++ mc_dev->obj_desc.type)) ++ return -ENOMEM; ++ + return 0; + } + diff --git a/target/linux/layerscape/patches-4.4/7181-staging-fsl-mc-clean-up-the-device-id-struct.patch b/target/linux/layerscape/patches-4.4/7181-staging-fsl-mc-clean-up-the-device-id-struct.patch new file mode 100644 index 0000000000..e5c58debd4 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7181-staging-fsl-mc-clean-up-the-device-id-struct.patch @@ -0,0 +1,85 @@ +From c7b1e04ae4f47323800ca2b3d3430ecf1d9ed7df Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 22 Jun 2016 16:40:44 -0500 +Subject: [PATCH 181/226] staging: fsl-mc: clean up the device id struct + +-rename the struct used for fsl-mc device ids to be more + consistent with other busses +-remove the now obsolete and unused version fields + +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 2 +- + drivers/staging/fsl-mc/bus/mc-allocator.c | 2 +- + drivers/staging/fsl-mc/bus/mc-bus.c | 2 +- + drivers/staging/fsl-mc/include/mc.h | 10 +++------- + 4 files changed, 6 insertions(+), 10 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -805,7 +805,7 @@ static int dprc_remove(struct fsl_mc_dev + return 0; + } + +-static const struct fsl_mc_device_match_id match_id_table[] = { ++static const struct fsl_mc_device_id match_id_table[] = { + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dprc"}, +--- a/drivers/staging/fsl-mc/bus/mc-allocator.c ++++ b/drivers/staging/fsl-mc/bus/mc-allocator.c +@@ -717,7 +717,7 @@ static int fsl_mc_allocator_remove(struc + return 0; + } + +-static const struct fsl_mc_device_match_id match_id_table[] = { ++static const struct fsl_mc_device_id match_id_table[] = { + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dpbp", +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -36,7 +36,7 @@ static bool fsl_mc_is_root_dprc(struct d + */ + static int fsl_mc_bus_match(struct device *dev, struct device_driver *drv) + { +- const struct fsl_mc_device_match_id *id; ++ const struct fsl_mc_device_id *id; + struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); + struct fsl_mc_driver *mc_drv = to_fsl_mc_driver(drv); + bool found = false; +--- a/drivers/staging/fsl-mc/include/mc.h ++++ b/drivers/staging/fsl-mc/include/mc.h +@@ -39,7 +39,7 @@ struct fsl_mc_bus; + */ + struct fsl_mc_driver { + struct device_driver driver; +- const struct fsl_mc_device_match_id *match_id_table; ++ const struct fsl_mc_device_id *match_id_table; + int (*probe)(struct fsl_mc_device *dev); + int (*remove)(struct fsl_mc_device *dev); + void (*shutdown)(struct fsl_mc_device *dev); +@@ -51,20 +51,16 @@ struct fsl_mc_driver { + container_of(_drv, struct fsl_mc_driver, driver) + + /** +- * struct fsl_mc_device_match_id - MC object device Id entry for driver matching ++ * struct fsl_mc_device_id - MC object device Id entry for driver matching + * @vendor: vendor ID + * @obj_type: MC object type +- * @ver_major: MC object version major number +- * @ver_minor: MC object version minor number + * + * Type of entries in the "device Id" table for MC object devices supported by + * a MC object device driver. The last entry of the table has vendor set to 0x0 + */ +-struct fsl_mc_device_match_id { ++struct fsl_mc_device_id { + u16 vendor; + const char obj_type[16]; +- u32 ver_major; +- u32 ver_minor; + }; + + /** diff --git a/target/linux/layerscape/patches-4.4/7182-staging-fsl-mc-add-support-for-device-table-matching.patch b/target/linux/layerscape/patches-4.4/7182-staging-fsl-mc-add-support-for-device-table-matching.patch new file mode 100644 index 0000000000..5ebb4591aa --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7182-staging-fsl-mc-add-support-for-device-table-matching.patch @@ -0,0 +1,98 @@ +From bd83c4253992d263cb83108e26b4687058f11deb Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 22 Jun 2016 16:40:45 -0500 +Subject: [PATCH 182/226] staging: fsl-mc: add support for device table + matching + +Move the definition of fsl_mc_device_id to its proper location in +mod_devicetable.h, and add fsl-mc bus support to devicetable-offsets.c +and file2alias.c to enable device table matching. With this patch udev +based module loading of fsl-mc drivers is supported. + +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/include/mc.h | 13 ------------- + include/linux/mod_devicetable.h | 16 ++++++++++++++++ + scripts/mod/devicetable-offsets.c | 4 ++++ + scripts/mod/file2alias.c | 12 ++++++++++++ + 4 files changed, 32 insertions(+), 13 deletions(-) + +--- a/drivers/staging/fsl-mc/include/mc.h ++++ b/drivers/staging/fsl-mc/include/mc.h +@@ -51,19 +51,6 @@ struct fsl_mc_driver { + container_of(_drv, struct fsl_mc_driver, driver) + + /** +- * struct fsl_mc_device_id - MC object device Id entry for driver matching +- * @vendor: vendor ID +- * @obj_type: MC object type +- * +- * Type of entries in the "device Id" table for MC object devices supported by +- * a MC object device driver. The last entry of the table has vendor set to 0x0 +- */ +-struct fsl_mc_device_id { +- u16 vendor; +- const char obj_type[16]; +-}; +- +-/** + * enum fsl_mc_pool_type - Types of allocatable MC bus resources + * + * Entries in these enum are used as indices in the array of resource +--- a/include/linux/mod_devicetable.h ++++ b/include/linux/mod_devicetable.h +@@ -657,4 +657,20 @@ struct ulpi_device_id { + kernel_ulong_t driver_data; + }; + ++/** ++ * struct fsl_mc_device_id - MC object device identifier ++ * @vendor: vendor ID ++ * @obj_type: MC object type ++ * @ver_major: MC object version major number ++ * @ver_minor: MC object version minor number ++ * ++ * Type of entries in the "device Id" table for MC object devices supported by ++ * a MC object device driver. The last entry of the table has vendor set to 0x0 ++ */ ++struct fsl_mc_device_id { ++ __u16 vendor; ++ const char obj_type[16]; ++}; ++ ++ + #endif /* LINUX_MOD_DEVICETABLE_H */ +--- a/scripts/mod/devicetable-offsets.c ++++ b/scripts/mod/devicetable-offsets.c +@@ -202,5 +202,9 @@ int main(void) + DEVID_FIELD(hda_device_id, rev_id); + DEVID_FIELD(hda_device_id, api_version); + ++ DEVID(fsl_mc_device_id); ++ DEVID_FIELD(fsl_mc_device_id, vendor); ++ DEVID_FIELD(fsl_mc_device_id, obj_type); ++ + return 0; + } +--- a/scripts/mod/file2alias.c ++++ b/scripts/mod/file2alias.c +@@ -1271,6 +1271,18 @@ static int do_hda_entry(const char *file + } + ADD_TO_DEVTABLE("hdaudio", hda_device_id, do_hda_entry); + ++/* Looks like: fsl-mc:vNdN */ ++static int do_fsl_mc_entry(const char *filename, void *symval, ++ char *alias) ++{ ++ DEF_FIELD(symval, fsl_mc_device_id, vendor); ++ DEF_FIELD_ADDR(symval, fsl_mc_device_id, obj_type); ++ ++ sprintf(alias, "fsl-mc:v%08Xd%s", vendor, *obj_type); ++ return 1; ++} ++ADD_TO_DEVTABLE("fslmc", fsl_mc_device_id, do_fsl_mc_entry); ++ + /* Does namelen bytes of name exactly match the symbol? */ + static bool sym_is(const char *name, unsigned namelen, const char *symbol) + { diff --git a/target/linux/layerscape/patches-4.4/7183-staging-fsl-mc-export-mc_get_version.patch b/target/linux/layerscape/patches-4.4/7183-staging-fsl-mc-export-mc_get_version.patch new file mode 100644 index 0000000000..330a1a885d --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7183-staging-fsl-mc-export-mc_get_version.patch @@ -0,0 +1,23 @@ +From 4087dc71f82a71c25f9d051773094f4ae3f4238d Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 22 Jun 2016 16:40:46 -0500 +Subject: [PATCH 183/226] staging: fsl-mc: export mc_get_version + +some drivers (built as modules) rely on mc_get_version() + +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dpmng.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/staging/fsl-mc/bus/dpmng.c ++++ b/drivers/staging/fsl-mc/bus/dpmng.c +@@ -67,6 +67,7 @@ int mc_get_version(struct fsl_mc_io *mc_ + + return 0; + } ++EXPORT_SYMBOL(mc_get_version); + + /** + * dpmng_get_container_id() - Get container ID associated with a given portal. diff --git a/target/linux/layerscape/patches-4.4/7184-staging-fsl-mc-make-fsl_mc_is_root_dprc-global.patch b/target/linux/layerscape/patches-4.4/7184-staging-fsl-mc-make-fsl_mc_is_root_dprc-global.patch new file mode 100644 index 0000000000..92b9c59a0c --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7184-staging-fsl-mc-make-fsl_mc_is_root_dprc-global.patch @@ -0,0 +1,77 @@ +From 82981b28f3a8a7f4ac61d8dc87a0abaeebfbe6dc Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 22 Jun 2016 16:40:47 -0500 +Subject: [PATCH 184/226] staging: fsl-mc: make fsl_mc_is_root_dprc() global + +make fsl_mc_is_root_dprc() global so that the dprc driver +can use it + +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 28 +++++++++++++--------------- + drivers/staging/fsl-mc/include/mc.h | 2 ++ + 2 files changed, 15 insertions(+), 15 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -24,8 +24,6 @@ + + static struct kmem_cache *mc_dev_cache; + +-static bool fsl_mc_is_root_dprc(struct device *dev); +- + /** + * fsl_mc_bus_match - device to driver matching callback + * @dev: the MC object device structure to match against +@@ -247,19 +245,6 @@ static void fsl_mc_get_root_dprc(struct + } + } + +-/** +- * fsl_mc_is_root_dprc - function to check if a given device is a root dprc +- */ +-static bool fsl_mc_is_root_dprc(struct device *dev) +-{ +- struct device *root_dprc_dev; +- +- fsl_mc_get_root_dprc(dev, &root_dprc_dev); +- if (!root_dprc_dev) +- return false; +- return dev == root_dprc_dev; +-} +- + static int get_dprc_attr(struct fsl_mc_io *mc_io, + int container_id, struct dprc_attributes *attr) + { +@@ -424,6 +409,19 @@ error_cleanup_regions: + } + + /** ++ * fsl_mc_is_root_dprc - function to check if a given device is a root dprc ++ */ ++bool fsl_mc_is_root_dprc(struct device *dev) ++{ ++ struct device *root_dprc_dev; ++ ++ fsl_mc_get_root_dprc(dev, &root_dprc_dev); ++ if (!root_dprc_dev) ++ return false; ++ return dev == root_dprc_dev; ++} ++ ++/** + * Add a newly discovered MC object device to be visible in Linux + */ + int fsl_mc_device_add(struct dprc_obj_desc *obj_desc, +--- a/drivers/staging/fsl-mc/include/mc.h ++++ b/drivers/staging/fsl-mc/include/mc.h +@@ -207,6 +207,8 @@ int __must_check fsl_mc_allocate_irqs(st + + void fsl_mc_free_irqs(struct fsl_mc_device *mc_dev); + ++bool fsl_mc_is_root_dprc(struct device *dev); ++ + extern struct bus_type fsl_mc_bus_type; + + #endif /* _FSL_MC_H_ */ diff --git a/target/linux/layerscape/patches-4.4/7185-staging-fsl-mc-fix-asymmetry-in-destroy-of-mc_io.patch b/target/linux/layerscape/patches-4.4/7185-staging-fsl-mc-fix-asymmetry-in-destroy-of-mc_io.patch new file mode 100644 index 0000000000..b148c76068 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7185-staging-fsl-mc-fix-asymmetry-in-destroy-of-mc_io.patch @@ -0,0 +1,62 @@ +From 4e55a4c296d3a93c95320cdac0b8e72f3cfefb98 Mon Sep 17 00:00:00 2001 +From: Bharat Bhushan +Date: Wed, 22 Jun 2016 16:40:48 -0500 +Subject: [PATCH 185/226] staging: fsl-mc: fix asymmetry in destroy of mc_io + +An mc_io represents a mapped MC portal. Previously, an mc_io was +created for the root dprc in fsl_mc_bus_probe() and for child dprcs +in dprc_probe(). But the free of that data structure happened in the +general bus remove callback. This asymmetry resulted in some bugs due +to unwanted destroys of mc_io object in some scenarios (e.g. vfio). + +Fix this bug by making things symmetric-- mc_io created in +fsl_mc_bus_probe() is freed in fsl_mc_bus_remove(). The mc_io created +in dprc_probe() is freed in dprc_remove(). + +Signed-off-by: Bharat Bhushan +[Stuart: added check for root dprc and reworded commit message] +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 5 +++++ + drivers/staging/fsl-mc/bus/mc-bus.c | 8 ++++---- + 2 files changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -801,6 +801,11 @@ static int dprc_remove(struct fsl_mc_dev + dev_set_msi_domain(&mc_dev->dev, NULL); + } + ++ if (!fsl_mc_is_root_dprc(&mc_dev->dev)) { ++ fsl_destroy_mc_io(mc_dev->mc_io); ++ mc_dev->mc_io = NULL; ++ } ++ + dev_info(&mc_dev->dev, "DPRC device unbound from driver"); + return 0; + } +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -579,10 +579,6 @@ void fsl_mc_device_remove(struct fsl_mc_ + + if (strcmp(mc_dev->obj_desc.type, "dprc") == 0) { + mc_bus = to_fsl_mc_bus(mc_dev); +- if (mc_dev->mc_io) { +- fsl_destroy_mc_io(mc_dev->mc_io); +- mc_dev->mc_io = NULL; +- } + + if (fsl_mc_is_root_dprc(&mc_dev->dev)) { + if (atomic_read(&root_dprc_count) > 0) +@@ -810,6 +806,10 @@ static int fsl_mc_bus_remove(struct plat + return -EINVAL; + + fsl_mc_device_remove(mc->root_mc_bus_dev); ++ ++ fsl_destroy_mc_io(mc->root_mc_bus_dev->mc_io); ++ mc->root_mc_bus_dev->mc_io = NULL; ++ + dev_info(&pdev->dev, "Root MC bus device removed"); + return 0; + } diff --git a/target/linux/layerscape/patches-4.4/7186-staging-fsl-mc-dprc-add-missing-irq-free.patch b/target/linux/layerscape/patches-4.4/7186-staging-fsl-mc-dprc-add-missing-irq-free.patch new file mode 100644 index 0000000000..0a485ec3e1 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7186-staging-fsl-mc-dprc-add-missing-irq-free.patch @@ -0,0 +1,28 @@ +From 159abffaa5e2acf910b5e4cdca81a7b6d2dd958f Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 22 Jun 2016 16:40:49 -0500 +Subject: [PATCH 186/226] staging: fsl-mc: dprc: add missing irq free + +add missing free of the Linux irq when tearing down interrupts + +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -760,7 +760,12 @@ error_cleanup_msi_domain: + */ + static void dprc_teardown_irq(struct fsl_mc_device *mc_dev) + { ++ struct fsl_mc_device_irq *irq = mc_dev->irqs[0]; ++ + (void)disable_dprc_irq(mc_dev); ++ ++ devm_free_irq(&mc_dev->dev, irq->msi_desc->irq, &mc_dev->dev); ++ + fsl_mc_free_irqs(mc_dev); + } + diff --git a/target/linux/layerscape/patches-4.4/7187-staging-fsl-mc-dprc-fix-ordering-problem-freeing-res.patch b/target/linux/layerscape/patches-4.4/7187-staging-fsl-mc-dprc-fix-ordering-problem-freeing-res.patch new file mode 100644 index 0000000000..c03e8d9b1f --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7187-staging-fsl-mc-dprc-fix-ordering-problem-freeing-res.patch @@ -0,0 +1,41 @@ +From b104ed7497745e2e6da214b37ef22edaf38098c7 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 22 Jun 2016 16:40:50 -0500 +Subject: [PATCH 187/226] staging: fsl-mc: dprc: fix ordering problem freeing + resources in remove of dprc + +When unbinding a dprc from the dprc driver the cleanup of +the resource pools must happen after irq pool cleanup +is done. + +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 10 ++++++---- + 1 file changed, 6 insertions(+), 4 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -796,16 +796,18 @@ static int dprc_remove(struct fsl_mc_dev + dprc_teardown_irq(mc_dev); + + device_for_each_child(&mc_dev->dev, NULL, __fsl_mc_device_remove); +- dprc_cleanup_all_resource_pools(mc_dev); +- error = dprc_close(mc_dev->mc_io, 0, mc_dev->mc_handle); +- if (error < 0) +- dev_err(&mc_dev->dev, "dprc_close() failed: %d\n", error); + + if (dev_get_msi_domain(&mc_dev->dev)) { + fsl_mc_cleanup_irq_pool(mc_bus); + dev_set_msi_domain(&mc_dev->dev, NULL); + } + ++ dprc_cleanup_all_resource_pools(mc_dev); ++ ++ error = dprc_close(mc_dev->mc_io, 0, mc_dev->mc_handle); ++ if (error < 0) ++ dev_err(&mc_dev->dev, "dprc_close() failed: %d\n", error); ++ + if (!fsl_mc_is_root_dprc(&mc_dev->dev)) { + fsl_destroy_mc_io(mc_dev->mc_io); + mc_dev->mc_io = NULL; diff --git a/target/linux/layerscape/patches-4.4/7188-staging-fsl-mc-properly-set-hwirq-in-msi-set_desc.patch b/target/linux/layerscape/patches-4.4/7188-staging-fsl-mc-properly-set-hwirq-in-msi-set_desc.patch new file mode 100644 index 0000000000..34aadad782 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7188-staging-fsl-mc-properly-set-hwirq-in-msi-set_desc.patch @@ -0,0 +1,48 @@ +From f5f9462cb947922817225b69240740e637de0149 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 22 Jun 2016 16:40:51 -0500 +Subject: [PATCH 188/226] staging: fsl-mc: properly set hwirq in msi set_desc + +For an MSI domain the hwirq is an arbitrary but unique +id to identify an interrupt. Previously the hwirq was set to +the MSI index of the interrupt, but that only works if there is +one DPRC. Additional DPRCs require an expanded namespace. Use +both the ICID (which is unique per DPRC) and the MSI index to +compose a hwirq value. + +Signed-off-by: Stuart Yoder +Signed-off-by: Greg Kroah-Hartman +--- + drivers/staging/fsl-mc/bus/mc-msi.c | 17 ++++++++++++++++- + 1 file changed, 16 insertions(+), 1 deletion(-) + +--- a/drivers/staging/fsl-mc/bus/mc-msi.c ++++ b/drivers/staging/fsl-mc/bus/mc-msi.c +@@ -20,11 +20,26 @@ + #include "../include/mc-sys.h" + #include "dprc-cmd.h" + ++/* ++ * Generate a unique ID identifying the interrupt (only used within the MSI ++ * irqdomain. Combine the icid with the interrupt index. ++ */ ++static irq_hw_number_t fsl_mc_domain_calc_hwirq(struct fsl_mc_device *dev, ++ struct msi_desc *desc) ++{ ++ /* ++ * Make the base hwirq value for ICID*10000 so it is readable ++ * as a decimal value in /proc/interrupts. ++ */ ++ return (irq_hw_number_t)(desc->fsl_mc.msi_index + (dev->icid * 10000)); ++} ++ + static void fsl_mc_msi_set_desc(msi_alloc_info_t *arg, + struct msi_desc *desc) + { + arg->desc = desc; +- arg->hwirq = (irq_hw_number_t)desc->fsl_mc.msi_index; ++ arg->hwirq = fsl_mc_domain_calc_hwirq(to_fsl_mc_device(desc->dev), ++ desc); + } + + static void fsl_mc_msi_update_dom_ops(struct msi_domain_info *info) diff --git a/target/linux/layerscape/patches-4.4/7189-staging-fsl-mc-update-dpcon-binary-interface-to-v2.2.patch b/target/linux/layerscape/patches-4.4/7189-staging-fsl-mc-update-dpcon-binary-interface-to-v2.2.patch new file mode 100644 index 0000000000..5f60ea7d87 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7189-staging-fsl-mc-update-dpcon-binary-interface-to-v2.2.patch @@ -0,0 +1,964 @@ +From 95c8565453e068db2664b5ee9cb0b7eced9a8d24 Mon Sep 17 00:00:00 2001 +From: Ioana Radulescu +Date: Fri, 3 Jul 2015 19:02:45 +0300 +Subject: [PATCH 189/226] staging: fsl-mc: update dpcon binary interface to + v2.2 + +-this includes adding the command building/parsing + wrapper functions + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/Makefile | 3 +- + drivers/staging/fsl-mc/bus/dpcon.c | 407 ++++++++++++++++++++++++++++ + drivers/staging/fsl-mc/include/dpcon-cmd.h | 102 ++++++- + drivers/staging/fsl-mc/include/dpcon.h | 407 ++++++++++++++++++++++++++++ + 4 files changed, 917 insertions(+), 2 deletions(-) + create mode 100644 drivers/staging/fsl-mc/bus/dpcon.c + create mode 100644 drivers/staging/fsl-mc/include/dpcon.h + +--- a/drivers/staging/fsl-mc/bus/Makefile ++++ b/drivers/staging/fsl-mc/bus/Makefile +@@ -16,4 +16,5 @@ mc-bus-driver-objs := mc-bus.o \ + mc-msi.o \ + irq-gic-v3-its-fsl-mc-msi.o \ + dpmcp.o \ +- dpbp.o ++ dpbp.o \ ++ dpcon.o +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpcon.c +@@ -0,0 +1,407 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include "../include/mc-sys.h" ++#include "../include/mc-cmd.h" ++#include "../include/dpcon.h" ++#include "../include/dpcon-cmd.h" ++ ++int dpcon_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpcon_id, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_OPEN, ++ cmd_flags, ++ 0); ++ DPCON_CMD_OPEN(cmd, dpcon_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++EXPORT_SYMBOL(dpcon_open); ++ ++int dpcon_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_CLOSE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++EXPORT_SYMBOL(dpcon_close); ++ ++int dpcon_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpcon_cfg *cfg, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_CREATE, ++ cmd_flags, ++ 0); ++ DPCON_CMD_CREATE(cmd, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpcon_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_DESTROY, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpcon_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_ENABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++EXPORT_SYMBOL(dpcon_enable); ++ ++int dpcon_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_DISABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++EXPORT_SYMBOL(dpcon_disable); ++ ++int dpcon_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_IS_ENABLED, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPCON_RSP_IS_ENABLED(cmd, *en); ++ ++ return 0; ++} ++ ++int dpcon_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_RESET, ++ cmd_flags, token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpcon_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpcon_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_SET_IRQ, ++ cmd_flags, ++ token); ++ DPCON_CMD_SET_IRQ(cmd, irq_index, irq_cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpcon_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpcon_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_GET_IRQ, ++ cmd_flags, ++ token); ++ DPCON_CMD_GET_IRQ(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPCON_RSP_GET_IRQ(cmd, *type, irq_cfg); ++ ++ return 0; ++} ++ ++int dpcon_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_SET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPCON_CMD_SET_IRQ_ENABLE(cmd, irq_index, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpcon_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_GET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPCON_CMD_GET_IRQ_ENABLE(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPCON_RSP_GET_IRQ_ENABLE(cmd, *en); ++ ++ return 0; ++} ++ ++int dpcon_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_SET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPCON_CMD_SET_IRQ_MASK(cmd, irq_index, mask); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpcon_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_GET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPCON_CMD_GET_IRQ_MASK(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPCON_RSP_GET_IRQ_MASK(cmd, *mask); ++ ++ return 0; ++} ++ ++int dpcon_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_GET_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPCON_CMD_GET_IRQ_STATUS(cmd, irq_index, *status); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPCON_RSP_GET_IRQ_STATUS(cmd, *status); ++ ++ return 0; ++} ++ ++int dpcon_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_CLEAR_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPCON_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpcon_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpcon_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_GET_ATTR, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPCON_RSP_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++EXPORT_SYMBOL(dpcon_get_attributes); ++ ++int dpcon_set_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpcon_notification_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPCON_CMDID_SET_NOTIFICATION, ++ cmd_flags, ++ token); ++ DPCON_CMD_SET_NOTIFICATION(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++EXPORT_SYMBOL(dpcon_set_notification); ++ +--- a/drivers/staging/fsl-mc/include/dpcon-cmd.h ++++ b/drivers/staging/fsl-mc/include/dpcon-cmd.h +@@ -34,7 +34,7 @@ + + /* DPCON Version */ + #define DPCON_VER_MAJOR 2 +-#define DPCON_VER_MINOR 1 ++#define DPCON_VER_MINOR 2 + + /* Command IDs */ + #define DPCON_CMDID_CLOSE 0x800 +@@ -59,4 +59,104 @@ + + #define DPCON_CMDID_SET_NOTIFICATION 0x100 + ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_OPEN(cmd, dpcon_id) \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, dpcon_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_CREATE(cmd, cfg) \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->num_priorities) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_RSP_IS_ENABLED(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_SET_IRQ(cmd, irq_index, irq_cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, irq_index);\ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, irq_cfg->val);\ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\ ++ MC_CMD_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_GET_IRQ(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_RSP_GET_IRQ(cmd, type, irq_cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val);\ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\ ++ MC_RSP_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, type);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_SET_IRQ_ENABLE(cmd, irq_index, en) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, en); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_GET_IRQ_ENABLE(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_RSP_GET_IRQ_ENABLE(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_SET_IRQ_MASK(cmd, irq_index, mask) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, mask); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_GET_IRQ_MASK(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_RSP_GET_IRQ_MASK(cmd, mask) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mask) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_GET_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_RSP_GET_IRQ_STATUS(cmd, status) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, status) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_RSP_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, int, attr->id);\ ++ MC_RSP_OP(cmd, 0, 32, 16, uint16_t, attr->qbman_ch_id);\ ++ MC_RSP_OP(cmd, 0, 48, 8, uint8_t, attr->num_priorities);\ ++ MC_RSP_OP(cmd, 1, 0, 16, uint16_t, attr->version.major);\ ++ MC_RSP_OP(cmd, 1, 16, 16, uint16_t, attr->version.minor);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPCON_CMD_SET_NOTIFICATION(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, cfg->dpio_id);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->priority);\ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->user_ctx);\ ++} while (0) ++ + #endif /* _FSL_DPCON_CMD_H */ +--- /dev/null ++++ b/drivers/staging/fsl-mc/include/dpcon.h +@@ -0,0 +1,407 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPCON_H ++#define __FSL_DPCON_H ++ ++/* Data Path Concentrator API ++ * Contains initialization APIs and runtime control APIs for DPCON ++ */ ++ ++struct fsl_mc_io; ++ ++/** General DPCON macros */ ++ ++/** ++ * Use it to disable notifications; see dpcon_set_notification() ++ */ ++#define DPCON_INVALID_DPIO_ID (int)(-1) ++ ++/** ++ * dpcon_open() - Open a control session for the specified object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @dpcon_id: DPCON unique ID ++ * @token: Returned token; use in subsequent API calls ++ * ++ * This function can be used to open a control session for an ++ * already created object; an object may have been declared in ++ * the DPL or by calling the dpcon_create() function. ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent commands for ++ * this specific object. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpcon_id, ++ uint16_t *token); ++ ++/** ++ * dpcon_close() - Close the control session of the object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * ++ * After this function is called, no further operations are ++ * allowed on the object without opening a new control session. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * struct dpcon_cfg - Structure representing DPCON configuration ++ * @num_priorities: Number of priorities for the DPCON channel (1-8) ++ */ ++struct dpcon_cfg { ++ uint8_t num_priorities; ++}; ++ ++/** ++ * dpcon_create() - Create the DPCON object. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @cfg: Configuration structure ++ * @token: Returned token; use in subsequent API calls ++ * ++ * Create the DPCON object, allocate required resources and ++ * perform required initialization. ++ * ++ * The object can be created either by declaring it in the ++ * DPL file, or by calling this function. ++ * ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent calls to ++ * this specific object. For objects that are created using the ++ * DPL file, call dpcon_open() function to get an authentication ++ * token first. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpcon_cfg *cfg, ++ uint16_t *token); ++ ++/** ++ * dpcon_destroy() - Destroy the DPCON object and release all its resources. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpcon_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpcon_enable() - Enable the DPCON ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * ++ * Return: '0' on Success; Error code otherwise ++ */ ++int dpcon_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpcon_disable() - Disable the DPCON ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * ++ * Return: '0' on Success; Error code otherwise ++ */ ++int dpcon_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpcon_is_enabled() - Check if the DPCON is enabled. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @en: Returns '1' if object is enabled; '0' otherwise ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en); ++ ++/** ++ * dpcon_reset() - Reset the DPCON, returns the object to initial state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * struct dpcon_irq_cfg - IRQ configuration ++ * @addr: Address that must be written to signal a message-based interrupt ++ * @val: Value to write into irq_addr address ++ * @irq_num: A user defined number associated with this IRQ ++ */ ++struct dpcon_irq_cfg { ++ uint64_t addr; ++ uint32_t val; ++ int irq_num; ++}; ++ ++/** ++ * dpcon_set_irq() - Set IRQ information for the DPCON to trigger an interrupt. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @irq_index: Identifies the interrupt index to configure ++ * @irq_cfg: IRQ configuration ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpcon_irq_cfg *irq_cfg); ++ ++/** ++ * dpcon_get_irq() - Get IRQ information from the DPCON. ++ * ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @irq_index: The interrupt index to configure ++ * @type: Interrupt type: 0 represents message interrupt ++ * type (both irq_addr and irq_val are valid) ++ * @irq_cfg: IRQ attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpcon_irq_cfg *irq_cfg); ++ ++/** ++ * dpcon_set_irq_enable() - Set overall interrupt state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @irq_index: The interrupt index to configure ++ * @en: Interrupt state - enable = 1, disable = 0 ++ * ++ * Allows GPP software to control when interrupts are generated. ++ * Each interrupt can have up to 32 causes. The enable/disable control's the ++ * overall interrupt state. if the interrupt is disabled no causes will cause ++ * an interrupt. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en); ++ ++/** ++ * dpcon_get_irq_enable() - Get overall interrupt state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @irq_index: The interrupt index to configure ++ * @en: Returned interrupt state - enable = 1, disable = 0 ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en); ++ ++/** ++ * dpcon_set_irq_mask() - Set interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @irq_index: The interrupt index to configure ++ * @mask: Event mask to trigger interrupt; ++ * each bit: ++ * 0 = ignore event ++ * 1 = consider event for asserting IRQ ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask); ++ ++/** ++ * dpcon_get_irq_mask() - Get interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @irq_index: The interrupt index to configure ++ * @mask: Returned event mask to trigger interrupt ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask); ++ ++/** ++ * dpcon_get_irq_status() - Get the current status of any pending interrupts. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @irq_index: The interrupt index to configure ++ * @status: interrupts status - one bit per cause: ++ * 0 = no interrupt pending ++ * 1 = interrupt pending ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status); ++ ++/** ++ * dpcon_clear_irq_status() - Clear a pending interrupt's status ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @irq_index: The interrupt index to configure ++ * @status: bits to clear (W1C) - one bit per cause: ++ * 0 = don't change ++ * 1 = clear status bit ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status); ++ ++/** ++ * struct dpcon_attr - Structure representing DPCON attributes ++ * @id: DPCON object ID ++ * @version: DPCON version ++ * @qbman_ch_id: Channel ID to be used by dequeue operation ++ * @num_priorities: Number of priorities for the DPCON channel (1-8) ++ */ ++struct dpcon_attr { ++ int id; ++ /** ++ * struct version - DPCON version ++ * @major: DPCON major version ++ * @minor: DPCON minor version ++ */ ++ struct { ++ uint16_t major; ++ uint16_t minor; ++ } version; ++ uint16_t qbman_ch_id; ++ uint8_t num_priorities; ++}; ++ ++/** ++ * dpcon_get_attributes() - Retrieve DPCON attributes. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @attr: Object's attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpcon_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpcon_attr *attr); ++ ++/** ++ * struct dpcon_notification_cfg - Structure representing notification parameters ++ * @dpio_id: DPIO object ID; must be configured with a notification channel; ++ * to disable notifications set it to 'DPCON_INVALID_DPIO_ID'; ++ * @priority: Priority selection within the DPIO channel; valid values ++ * are 0-7, depending on the number of priorities in that channel ++ * @user_ctx: User context value provided with each CDAN message ++ */ ++struct dpcon_notification_cfg { ++ int dpio_id; ++ uint8_t priority; ++ uint64_t user_ctx; ++}; ++ ++/** ++ * dpcon_set_notification() - Set DPCON notification destination ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCON object ++ * @cfg: Notification parameters ++ * ++ * Return: '0' on Success; Error code otherwise ++ */ ++int dpcon_set_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpcon_notification_cfg *cfg); ++ ++#endif /* __FSL_DPCON_H */ diff --git a/target/linux/layerscape/patches-4.4/7190-staging-fsl-mc-root-dprc-rescan-attribute-to-sync-ke.patch b/target/linux/layerscape/patches-4.4/7190-staging-fsl-mc-root-dprc-rescan-attribute-to-sync-ke.patch new file mode 100644 index 0000000000..a38907b0bd --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7190-staging-fsl-mc-root-dprc-rescan-attribute-to-sync-ke.patch @@ -0,0 +1,59 @@ +From 75b607ff8725eac74f3375b3370f7d121d1827a3 Mon Sep 17 00:00:00 2001 +From: Lijun Pan +Date: Mon, 8 Feb 2016 17:40:14 -0600 +Subject: [PATCH 190/226] staging: fsl-mc: root dprc rescan attribute to sync + kernel with MC + +Introduce the rescan attribute as a device attribute to +synchronize the fsl-mc bus objects and the MC firmware. + +To rescan the root dprc only, e.g. +echo 1 > /sys/bus/fsl-mc/devices/dprc.1/rescan + +Signed-off-by: Lijun Pan +[Stuart: resolved merge conflict] +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 29 +++++++++++++++++++++++++++++ + 1 file changed, 29 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -96,8 +96,37 @@ static ssize_t modalias_show(struct devi + } + static DEVICE_ATTR_RO(modalias); + ++static ssize_t rescan_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ unsigned long val; ++ unsigned int irq_count; ++ struct fsl_mc_device *root_mc_dev; ++ struct fsl_mc_bus *root_mc_bus; ++ ++ if (!fsl_mc_is_root_dprc(dev)) ++ return -EINVAL; ++ ++ root_mc_dev = to_fsl_mc_device(dev); ++ root_mc_bus = to_fsl_mc_bus(root_mc_dev); ++ ++ if (kstrtoul(buf, 0, &val) < 0) ++ return -EINVAL; ++ ++ if (val) { ++ mutex_lock(&root_mc_bus->scan_mutex); ++ dprc_scan_objects(root_mc_dev, &irq_count); ++ mutex_unlock(&root_mc_bus->scan_mutex); ++ } ++ ++ return count; ++} ++static DEVICE_ATTR_WO(rescan); ++ + static struct attribute *fsl_mc_dev_attrs[] = { + &dev_attr_modalias.attr, ++ &dev_attr_rescan.attr, + NULL, + }; + diff --git a/target/linux/layerscape/patches-4.4/7191-staging-fsl-mc-bus-rescan-attribute-to-sync-kernel-w.patch b/target/linux/layerscape/patches-4.4/7191-staging-fsl-mc-bus-rescan-attribute-to-sync-kernel-w.patch new file mode 100644 index 0000000000..d89815d812 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7191-staging-fsl-mc-bus-rescan-attribute-to-sync-kernel-w.patch @@ -0,0 +1,78 @@ +From 417d71b1e291725c01893bf1553478924d05952f Mon Sep 17 00:00:00 2001 +From: Lijun Pan +Date: Mon, 8 Feb 2016 17:40:16 -0600 +Subject: [PATCH 191/226] staging: fsl-mc: bus rescan attribute to sync kernel + with MC + +Introduce the rescan attribute as a bus attribute to +synchronize the fsl-mc bus objects and the MC firmware. + +To rescan the fsl-mc bus, e.g., +echo 1 > /sys/bus/fsl-mc/rescan + +Signed-off-by: Lijun Pan +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 47 +++++++++++++++++++++++++++++++++++ + 1 file changed, 47 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -139,11 +139,58 @@ static const struct attribute_group *fsl + NULL, + }; + ++static int scan_fsl_mc_bus(struct device *dev, void *data) ++{ ++ unsigned int irq_count; ++ struct fsl_mc_device *root_mc_dev; ++ struct fsl_mc_bus *root_mc_bus; ++ ++ if (fsl_mc_is_root_dprc(dev)) { ++ root_mc_dev = to_fsl_mc_device(dev); ++ root_mc_bus = to_fsl_mc_bus(root_mc_dev); ++ mutex_lock(&root_mc_bus->scan_mutex); ++ dprc_scan_objects(root_mc_dev, &irq_count); ++ mutex_unlock(&root_mc_bus->scan_mutex); ++ } ++ ++ return 0; ++} ++ ++static ssize_t bus_rescan_store(struct bus_type *bus, ++ const char *buf, size_t count) ++{ ++ unsigned long val; ++ ++ if (kstrtoul(buf, 0, &val) < 0) ++ return -EINVAL; ++ ++ if (val) ++ bus_for_each_dev(bus, NULL, NULL, scan_fsl_mc_bus); ++ ++ return count; ++} ++static BUS_ATTR(rescan, (S_IWUSR | S_IWGRP), NULL, bus_rescan_store); ++ ++static struct attribute *fsl_mc_bus_attrs[] = { ++ &bus_attr_rescan.attr, ++ NULL, ++}; ++ ++static const struct attribute_group fsl_mc_bus_group = { ++ .attrs = fsl_mc_bus_attrs, ++}; ++ ++static const struct attribute_group *fsl_mc_bus_groups[] = { ++ &fsl_mc_bus_group, ++ NULL, ++}; ++ + struct bus_type fsl_mc_bus_type = { + .name = "fsl-mc", + .match = fsl_mc_bus_match, + .uevent = fsl_mc_bus_uevent, + .dev_groups = fsl_mc_dev_groups, ++ .bus_groups = fsl_mc_bus_groups, + }; + EXPORT_SYMBOL_GPL(fsl_mc_bus_type); + diff --git a/target/linux/layerscape/patches-4.4/7192-staging-fsl-mc-Propagate-driver_override-for-a-child.patch b/target/linux/layerscape/patches-4.4/7192-staging-fsl-mc-Propagate-driver_override-for-a-child.patch new file mode 100644 index 0000000000..20b952e5f3 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7192-staging-fsl-mc-Propagate-driver_override-for-a-child.patch @@ -0,0 +1,193 @@ +From 2b9110586a96afc0d0e246835da176c48ae7c973 Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Fri, 13 Mar 2015 15:03:32 -0500 +Subject: [PATCH 192/226] staging: fsl-mc: Propagate driver_override for a + child DPRC's children + +When a child DPRC is bound to the vfio_fsl_mc driver via driver_override, +its own children should not be bound to corresponding host kernel +drivers, but instead should be bound to the vfio_fsl_mc driver as +well. + +Currently, when a child container is scanned by the vfio_fsl_mc driver, +child devices found are automatically bound to corresponding host kernel +drivers (e.g., DPMCP and DPBP objects are bound to the fsl_mc_allocator +driver, DPNI objects are bound to the ldpaa_eth driver, etc), Then, +the user has to manually unbind these child devices from their drivers, +set the driver_override sysfs attribute to vfio_fsl_mc driver, for each +of them and rebind them. + +Signed-off-by: J. German Rivera +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 14 ++++++++++---- + drivers/staging/fsl-mc/bus/mc-bus.c | 20 +++++++++++++++++--- + drivers/staging/fsl-mc/include/mc-private.h | 2 ++ + drivers/staging/fsl-mc/include/mc.h | 2 ++ + 4 files changed, 31 insertions(+), 7 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -152,6 +152,8 @@ static void check_plugged_state_change(s + * dprc_add_new_devices - Adds devices to the logical bus for a DPRC + * + * @mc_bus_dev: pointer to the fsl-mc device that represents a DPRC object ++ * @driver_override: driver override to apply to new objects found in the DPRC, ++ * or NULL, if none. + * @obj_desc_array: array of device descriptors for child devices currently + * present in the physical DPRC. + * @num_child_objects_in_mc: number of entries in obj_desc_array +@@ -161,6 +163,7 @@ static void check_plugged_state_change(s + * in the physical DPRC. + */ + static void dprc_add_new_devices(struct fsl_mc_device *mc_bus_dev, ++ const char *driver_override, + struct dprc_obj_desc *obj_desc_array, + int num_child_objects_in_mc) + { +@@ -184,7 +187,7 @@ static void dprc_add_new_devices(struct + } + + error = fsl_mc_device_add(obj_desc, NULL, &mc_bus_dev->dev, +- &child_dev); ++ driver_override, &child_dev); + if (error < 0) + continue; + } +@@ -243,6 +246,8 @@ static void dprc_cleanup_all_resource_po + * dprc_scan_objects - Discover objects in a DPRC + * + * @mc_bus_dev: pointer to the fsl-mc device that represents a DPRC object ++ * @driver_override: driver override to apply to new objects found in the DPRC, ++ * or NULL, if none. + * @total_irq_count: total number of IRQs needed by objects in the DPRC. + * + * Detects objects added and removed from a DPRC and synchronizes the +@@ -258,6 +263,7 @@ static void dprc_cleanup_all_resource_po + * of the device drivers for the non-allocatable devices. + */ + int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev, ++ const char *driver_override, + unsigned int *total_irq_count) + { + int num_child_objects; +@@ -338,7 +344,7 @@ int dprc_scan_objects(struct fsl_mc_devi + dprc_remove_devices(mc_bus_dev, child_obj_desc_array, + num_child_objects); + +- dprc_add_new_devices(mc_bus_dev, child_obj_desc_array, ++ dprc_add_new_devices(mc_bus_dev, driver_override, child_obj_desc_array, + num_child_objects); + + if (child_obj_desc_array) +@@ -369,7 +375,7 @@ int dprc_scan_container(struct fsl_mc_de + * Discover objects in the DPRC: + */ + mutex_lock(&mc_bus->scan_mutex); +- error = dprc_scan_objects(mc_bus_dev, &irq_count); ++ error = dprc_scan_objects(mc_bus_dev, NULL, &irq_count); + mutex_unlock(&mc_bus->scan_mutex); + if (error < 0) + goto error; +@@ -456,7 +462,7 @@ static irqreturn_t dprc_irq0_handler_thr + DPRC_IRQ_EVENT_OBJ_CREATED)) { + unsigned int irq_count; + +- error = dprc_scan_objects(mc_dev, &irq_count); ++ error = dprc_scan_objects(mc_dev, NULL, &irq_count); + if (error < 0) { + /* + * If the error is -ENXIO, we ignore it, as it indicates +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -116,7 +116,7 @@ static ssize_t rescan_store(struct devic + + if (val) { + mutex_lock(&root_mc_bus->scan_mutex); +- dprc_scan_objects(root_mc_dev, &irq_count); ++ dprc_scan_objects(root_mc_dev, NULL, &irq_count); + mutex_unlock(&root_mc_bus->scan_mutex); + } + +@@ -149,7 +149,7 @@ static int scan_fsl_mc_bus(struct device + root_mc_dev = to_fsl_mc_device(dev); + root_mc_bus = to_fsl_mc_bus(root_mc_dev); + mutex_lock(&root_mc_bus->scan_mutex); +- dprc_scan_objects(root_mc_dev, &irq_count); ++ dprc_scan_objects(root_mc_dev, NULL, &irq_count); + mutex_unlock(&root_mc_bus->scan_mutex); + } + +@@ -503,6 +503,7 @@ bool fsl_mc_is_root_dprc(struct device * + int fsl_mc_device_add(struct dprc_obj_desc *obj_desc, + struct fsl_mc_io *mc_io, + struct device *parent_dev, ++ const char *driver_override, + struct fsl_mc_device **new_mc_dev) + { + int error; +@@ -535,6 +536,18 @@ int fsl_mc_device_add(struct dprc_obj_de + + mc_dev->obj_desc = *obj_desc; + mc_dev->mc_io = mc_io; ++ if (driver_override) { ++ /* ++ * We trust driver_override, so we don't need to use ++ * kstrndup() here ++ */ ++ mc_dev->driver_override = kstrdup(driver_override, GFP_KERNEL); ++ if (!mc_dev->driver_override) { ++ error = -ENOMEM; ++ goto error_cleanup_dev; ++ } ++ } ++ + device_initialize(&mc_dev->dev); + mc_dev->dev.parent = parent_dev; + mc_dev->dev.bus = &fsl_mc_bus_type; +@@ -858,7 +871,8 @@ static int fsl_mc_bus_probe(struct platf + obj_desc.irq_count = 1; + obj_desc.region_count = 0; + +- error = fsl_mc_device_add(&obj_desc, mc_io, &pdev->dev, &mc_bus_dev); ++ error = fsl_mc_device_add(&obj_desc, mc_io, &pdev->dev, NULL, ++ &mc_bus_dev); + if (error < 0) + goto error_cleanup_mc_io; + +--- a/drivers/staging/fsl-mc/include/mc-private.h ++++ b/drivers/staging/fsl-mc/include/mc-private.h +@@ -110,6 +110,7 @@ struct fsl_mc_bus { + int __must_check fsl_mc_device_add(struct dprc_obj_desc *obj_desc, + struct fsl_mc_io *mc_io, + struct device *parent_dev, ++ const char *driver_override, + struct fsl_mc_device **new_mc_dev); + + void fsl_mc_device_remove(struct fsl_mc_device *mc_dev); +@@ -117,6 +118,7 @@ void fsl_mc_device_remove(struct fsl_mc_ + int dprc_scan_container(struct fsl_mc_device *mc_bus_dev); + + int dprc_scan_objects(struct fsl_mc_device *mc_bus_dev, ++ const char *driver_override, + unsigned int *total_irq_count); + + int __init dprc_driver_init(void); +--- a/drivers/staging/fsl-mc/include/mc.h ++++ b/drivers/staging/fsl-mc/include/mc.h +@@ -129,6 +129,7 @@ struct fsl_mc_device_irq { + * @regions: pointer to array of MMIO region entries + * @irqs: pointer to array of pointers to interrupts allocated to this device + * @resource: generic resource associated with this MC object device, if any. ++ * @driver_override: Driver name to force a match + * + * Generic device object for MC object devices that are "attached" to a + * MC bus. +@@ -161,6 +162,7 @@ struct fsl_mc_device { + struct resource *regions; + struct fsl_mc_device_irq **irqs; + struct fsl_mc_resource *resource; ++ const char *driver_override; + }; + + #define to_fsl_mc_device(_dev) \ diff --git a/target/linux/layerscape/patches-4.4/7193-staging-fsl-mc-add-device-binding-path-driver_overri.patch b/target/linux/layerscape/patches-4.4/7193-staging-fsl-mc-add-device-binding-path-driver_overri.patch new file mode 100644 index 0000000000..60d294a1da --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7193-staging-fsl-mc-add-device-binding-path-driver_overri.patch @@ -0,0 +1,111 @@ +From 0bda83c15b2ecfc45fac0656df15d4f4fa65afa9 Mon Sep 17 00:00:00 2001 +From: Bharat Bhushan +Date: Wed, 18 Mar 2015 17:32:59 -0500 +Subject: [PATCH 193/226] staging: fsl-mc: add device binding path + 'driver_override' + +This patch is required for vfio-fsl-mc meta driver to successfully bind +layerscape container devices for device passthrough. This patch adds +a mechanism to allow a layerscape device to specify a driver rather than +a layerscape driver provide a device match. + +This patch is based on following proposed patches for PCI and platform devices +- https://lkml.org/lkml/2014/4/8/571 :- For Platform devices +- http://lists-archives.com/linux-kernel/28030441-pci-introduce-new-device-binding-path-using-pci_dev-driver_override.html :- For PCI devices + +Example to allow a device (dprc.1) to specifically bind +with driver (vfio-fsl-mc):- +- echo vfio-fsl-mc > /sys/bus/fsl-mc/devices/dprc.1/driver_override +- echo dprc.1 > /sys/bus/fsl-mc/drivers/fsl_mc_dprc/unbind +- echo dprc.1 > /sys/bus/fsl-mc/drivers/vfio-fsl-mc/bind + +Signed-off-by: J. German Rivera +(Stuart: resolved merge conflicts) +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 53 +++++++++++++++++++++++++++++++++++ + 1 file changed, 53 insertions(+) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -42,6 +42,12 @@ static int fsl_mc_bus_match(struct devic + if (WARN_ON(!fsl_mc_bus_exists())) + goto out; + ++ /* When driver_override is set, only bind to the matching driver */ ++ if (mc_dev->driver_override) { ++ found = !strcmp(mc_dev->driver_override, mc_drv->driver.name); ++ goto out; ++ } ++ + if (!mc_drv->match_id_table) + goto out; + +@@ -96,6 +102,50 @@ static ssize_t modalias_show(struct devi + } + static DEVICE_ATTR_RO(modalias); + ++static ssize_t driver_override_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); ++ const char *driver_override, *old = mc_dev->driver_override; ++ char *cp; ++ ++ if (WARN_ON(dev->bus != &fsl_mc_bus_type)) ++ return -EINVAL; ++ ++ if (count > PATH_MAX) ++ return -EINVAL; ++ ++ driver_override = kstrndup(buf, count, GFP_KERNEL); ++ if (!driver_override) ++ return -ENOMEM; ++ ++ cp = strchr(driver_override, '\n'); ++ if (cp) ++ *cp = '\0'; ++ ++ if (strlen(driver_override)) { ++ mc_dev->driver_override = driver_override; ++ } else { ++ kfree(driver_override); ++ mc_dev->driver_override = NULL; ++ } ++ ++ kfree(old); ++ ++ return count; ++} ++ ++static ssize_t driver_override_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); ++ ++ return sprintf(buf, "%s\n", mc_dev->driver_override); ++} ++ ++static DEVICE_ATTR_RW(driver_override); ++ + static ssize_t rescan_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +@@ -127,6 +177,7 @@ static DEVICE_ATTR_WO(rescan); + static struct attribute *fsl_mc_dev_attrs[] = { + &dev_attr_modalias.attr, + &dev_attr_rescan.attr, ++ &dev_attr_driver_override.attr, + NULL, + }; + +@@ -677,6 +728,8 @@ void fsl_mc_device_remove(struct fsl_mc_ + } + } + ++ kfree(mc_dev->driver_override); ++ mc_dev->driver_override = NULL; + if (mc_bus) + devm_kfree(mc_dev->dev.parent, mc_bus); + else diff --git a/target/linux/layerscape/patches-4.4/7194-staging-fsl-mc-export-irq-cleanup-for-vfio-to-use.patch b/target/linux/layerscape/patches-4.4/7194-staging-fsl-mc-export-irq-cleanup-for-vfio-to-use.patch new file mode 100644 index 0000000000..0b926850c8 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7194-staging-fsl-mc-export-irq-cleanup-for-vfio-to-use.patch @@ -0,0 +1,47 @@ +From 552d628c887d970b9a97d8db2629adc4820fb8e3 Mon Sep 17 00:00:00 2001 +From: Bharat Bhushan +Date: Thu, 16 Jul 2015 14:44:24 +0530 +Subject: [PATCH 194/226] staging: fsl-mc: export irq cleanup for vfio to use + +VFIO driver needs these basic functions for +setting up itt/its of dprc's bound to it. + +Signed-off-by: Bharat Bhushan +(Stuart: resolved merge conflict, commit log cleanup) +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/dprc-driver.c | 4 ++-- + drivers/staging/fsl-mc/include/mc-private.h | 4 ++++ + 2 files changed, 6 insertions(+), 2 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dprc-driver.c ++++ b/drivers/staging/fsl-mc/bus/dprc-driver.c +@@ -193,7 +193,7 @@ static void dprc_add_new_devices(struct + } + } + +-static void dprc_init_all_resource_pools(struct fsl_mc_device *mc_bus_dev) ++void dprc_init_all_resource_pools(struct fsl_mc_device *mc_bus_dev) + { + int pool_type; + struct fsl_mc_bus *mc_bus = to_fsl_mc_bus(mc_bus_dev); +@@ -234,7 +234,7 @@ static void dprc_cleanup_resource_pool(s + WARN_ON(free_count != res_pool->free_count); + } + +-static void dprc_cleanup_all_resource_pools(struct fsl_mc_device *mc_bus_dev) ++void dprc_cleanup_all_resource_pools(struct fsl_mc_device *mc_bus_dev) + { + int pool_type; + +--- a/drivers/staging/fsl-mc/include/mc-private.h ++++ b/drivers/staging/fsl-mc/include/mc-private.h +@@ -157,4 +157,8 @@ int fsl_mc_populate_irq_pool(struct fsl_ + + void fsl_mc_cleanup_irq_pool(struct fsl_mc_bus *mc_bus); + ++void dprc_init_all_resource_pools(struct fsl_mc_device *mc_bus_dev); ++ ++void dprc_cleanup_all_resource_pools(struct fsl_mc_device *mc_bus_dev); ++ + #endif /* _FSL_MC_PRIVATE_H_ */ diff --git a/target/linux/layerscape/patches-4.4/7195-increment-MC_CMD_COMPLETION_TIMEOUT_MS.patch b/target/linux/layerscape/patches-4.4/7195-increment-MC_CMD_COMPLETION_TIMEOUT_MS.patch new file mode 100644 index 0000000000..438234b148 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7195-increment-MC_CMD_COMPLETION_TIMEOUT_MS.patch @@ -0,0 +1,88 @@ +From 71d19cd1107fa435d056e08e7d7ef7d8f714cf35 Mon Sep 17 00:00:00 2001 +From: Lijun Pan +Date: Fri, 31 Jul 2015 15:07:32 -0500 +Subject: [PATCH 195/226] increment MC_CMD_COMPLETION_TIMEOUT_MS + +5000ms is barely enough for dpsw/dpdmux creation. +If MC firmware could run faster, we would decrement the value later on. + +Signed-off-by: Lijun Pan +(Stuart: resolved merge conflict) +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/mc-sys.c | 38 +++++++++++++++-------------------- + 1 file changed, 16 insertions(+), 22 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/mc-sys.c ++++ b/drivers/staging/fsl-mc/bus/mc-sys.c +@@ -43,8 +43,10 @@ + + /** + * Timeout in milliseconds to wait for the completion of an MC command ++ * 5000 ms is barely enough for dpsw/dpdmux creation ++ * TODO: if MC firmware could response faster, we should decrease this value + */ +-#define MC_CMD_COMPLETION_TIMEOUT_MS 500 ++#define MC_CMD_COMPLETION_TIMEOUT_MS 5000 + + /* + * usleep_range() min and max values used to throttle down polling +@@ -327,17 +329,8 @@ static int mc_polling_wait_preemptible(s + usleep_range(MC_CMD_COMPLETION_POLLING_MIN_SLEEP_USECS, + MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS); + +- if (time_after_eq(jiffies, jiffies_until_timeout)) { +- dev_dbg(mc_io->dev, +- "MC command timed out (portal: %#llx, obj handle: %#x, command: %#x)\n", +- mc_io->portal_phys_addr, +- (unsigned int) +- MC_CMD_HDR_READ_TOKEN(cmd->header), +- (unsigned int) +- MC_CMD_HDR_READ_CMDID(cmd->header)); +- ++ if (time_after_eq(jiffies, jiffies_until_timeout)) + return -ETIMEDOUT; +- } + } + + *mc_status = status; +@@ -369,17 +362,8 @@ static int mc_polling_wait_atomic(struct + + udelay(MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS); + timeout_usecs -= MC_CMD_COMPLETION_POLLING_MAX_SLEEP_USECS; +- if (timeout_usecs == 0) { +- dev_dbg(mc_io->dev, +- "MC command timed out (portal: %#llx, obj handle: %#x, command: %#x)\n", +- mc_io->portal_phys_addr, +- (unsigned int) +- MC_CMD_HDR_READ_TOKEN(cmd->header), +- (unsigned int) +- MC_CMD_HDR_READ_CMDID(cmd->header)); +- ++ if (timeout_usecs == 0) + return -ETIMEDOUT; +- } + } + + *mc_status = status; +@@ -422,9 +406,19 @@ int mc_send_command(struct fsl_mc_io *mc + else + error = mc_polling_wait_atomic(mc_io, cmd, &status); + +- if (error < 0) ++ if (error < 0) { ++ if (error == -ETIMEDOUT) { ++ pr_debug("MC command timed out (portal: %#llx, obj handle: %#x, command: %#x)\n", ++ mc_io->portal_phys_addr, ++ (unsigned int) ++ MC_CMD_HDR_READ_TOKEN(cmd->header), ++ (unsigned int) ++ MC_CMD_HDR_READ_CMDID(cmd->header)); ++ } + goto common_exit; + ++ } ++ + if (status != MC_CMD_STATUS_OK) { + dev_dbg(mc_io->dev, + "MC command failed: portal: %#llx, obj handle: %#x, command: %#x, status: %s (%#x)\n", diff --git a/target/linux/layerscape/patches-4.4/7196-staging-fsl-mc-make-fsl_mc_get_root_dprc-public.patch b/target/linux/layerscape/patches-4.4/7196-staging-fsl-mc-make-fsl_mc_get_root_dprc-public.patch new file mode 100644 index 0000000000..d465f90c33 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7196-staging-fsl-mc-make-fsl_mc_get_root_dprc-public.patch @@ -0,0 +1,45 @@ +From 12b1317fb3ab5b56efd833fa3b22965adf1d2c96 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Fri, 15 Apr 2016 17:07:16 -0500 +Subject: [PATCH 196/226] staging: fsl-mc: make fsl_mc_get_root_dprc public + +this is needed by other components (e.g. vfio) to find +the root dprc + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/mc-bus.c | 3 ++- + drivers/staging/fsl-mc/include/mc.h | 3 +++ + 2 files changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/staging/fsl-mc/bus/mc-bus.c ++++ b/drivers/staging/fsl-mc/bus/mc-bus.c +@@ -358,7 +358,7 @@ EXPORT_SYMBOL_GPL(fsl_mc_bus_exists); + /** + * fsl_mc_get_root_dprc - function to traverse to the root dprc + */ +-static void fsl_mc_get_root_dprc(struct device *dev, ++void fsl_mc_get_root_dprc(struct device *dev, + struct device **root_dprc_dev) + { + if (WARN_ON(!dev)) { +@@ -371,6 +371,7 @@ static void fsl_mc_get_root_dprc(struct + *root_dprc_dev = (*root_dprc_dev)->parent; + } + } ++EXPORT_SYMBOL_GPL(fsl_mc_get_root_dprc); + + static int get_dprc_attr(struct fsl_mc_io *mc_io, + int container_id, struct dprc_attributes *attr) +--- a/drivers/staging/fsl-mc/include/mc.h ++++ b/drivers/staging/fsl-mc/include/mc.h +@@ -191,6 +191,9 @@ void fsl_mc_driver_unregister(struct fsl + + bool fsl_mc_bus_exists(void); + ++void fsl_mc_get_root_dprc(struct device *dev, ++ struct device **root_dprc_dev); ++ + int __must_check fsl_mc_portal_allocate(struct fsl_mc_device *mc_dev, + u16 mc_io_flags, + struct fsl_mc_io **new_mc_io); diff --git a/target/linux/layerscape/patches-4.4/7197-staging-fsl-mc-Management-Complex-restool-driver.patch b/target/linux/layerscape/patches-4.4/7197-staging-fsl-mc-Management-Complex-restool-driver.patch new file mode 100644 index 0000000000..2a5e5df2be --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7197-staging-fsl-mc-Management-Complex-restool-driver.patch @@ -0,0 +1,489 @@ +From fb4881d149742e4c5595aca8bf86c99d2ea155ad Mon Sep 17 00:00:00 2001 +From: Lijun Pan +Date: Mon, 8 Feb 2016 17:40:18 -0600 +Subject: [PATCH 197/226] staging: fsl-mc: Management Complex restool driver + +The kernel support for the restool (a user space resource management +tool) is a driver for the /dev/dprc.N device file. +Its purpose is to provide an ioctl interface, +which the restool uses to interact with the MC bus driver +and with the MC firmware. +We allocate a dpmcp at driver initialization, +and keep that dpmcp until driver exit. +We use that dpmcp by default. +If that dpmcp is in use, we create another portal at run time +and destroy the newly created portal after use. +The ioctl RESTOOL_SEND_MC_COMMAND sends user space command to fsl-mc +bus and utilizes the fsl-mc bus to communicate with MC firmware. +The ioctl RESTOOL_DPRC_SYNC request the mc-bus launch +objects scan under root dprc. +In order to support multiple root dprc, we utilize the bus notify +mechanism to scan fsl_mc_bus_type for the newly added root dprc. +After discovering the root dprc, it creates a miscdevice +/dev/dprc.N to associate with this root dprc. + +Signed-off-by: Lijun Pan +[Stuart: minor fix to resolve compile error] +Signed-off-by: Stuart Yoder +--- + Documentation/ioctl/ioctl-number.txt | 1 + + drivers/staging/fsl-mc/bus/Kconfig | 7 +- + drivers/staging/fsl-mc/bus/Makefile | 3 + + drivers/staging/fsl-mc/bus/mc-ioctl.h | 22 ++ + drivers/staging/fsl-mc/bus/mc-restool.c | 392 +++++++++++++++++++++++++++++++ + 5 files changed, 424 insertions(+), 1 deletion(-) + create mode 100644 drivers/staging/fsl-mc/bus/mc-ioctl.h + create mode 100644 drivers/staging/fsl-mc/bus/mc-restool.c + +--- a/Documentation/ioctl/ioctl-number.txt ++++ b/Documentation/ioctl/ioctl-number.txt +@@ -170,6 +170,7 @@ Code Seq#(hex) Include File Comments + 'R' 00-1F linux/random.h conflict! + 'R' 01 linux/rfkill.h conflict! + 'R' C0-DF net/bluetooth/rfcomm.h ++'R' E0-EF drivers/staging/fsl-mc/bus/mc-ioctl.h + 'S' all linux/cdrom.h conflict! + 'S' 80-81 scsi/scsi_ioctl.h conflict! + 'S' 82-FF scsi/scsi.h conflict! +--- a/drivers/staging/fsl-mc/bus/Kconfig ++++ b/drivers/staging/fsl-mc/bus/Kconfig +@@ -22,4 +22,9 @@ config FSL_MC_BUS + Only enable this option when building the kernel for + Freescale QorQIQ LS2xxxx SoCs. + +- ++config FSL_MC_RESTOOL ++ tristate "Freescale Management Complex (MC) restool driver" ++ depends on FSL_MC_BUS ++ help ++ Driver that provides kernel support for the Freescale Management ++ Complex resource manager user-space tool. +--- a/drivers/staging/fsl-mc/bus/Makefile ++++ b/drivers/staging/fsl-mc/bus/Makefile +@@ -18,3 +18,6 @@ mc-bus-driver-objs := mc-bus.o \ + dpmcp.o \ + dpbp.o \ + dpcon.o ++ ++# MC restool kernel support ++obj-$(CONFIG_FSL_MC_RESTOOL) += mc-restool.o +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/mc-ioctl.h +@@ -0,0 +1,22 @@ ++/* ++ * Freescale Management Complex (MC) ioclt interface ++ * ++ * Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * Author: Lijun Pan ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++#ifndef _FSL_MC_IOCTL_H_ ++#define _FSL_MC_IOCTL_H_ ++ ++#include ++#include "../include/mc-sys.h" ++ ++#define RESTOOL_IOCTL_TYPE 'R' ++ ++#define RESTOOL_SEND_MC_COMMAND \ ++ _IOWR(RESTOOL_IOCTL_TYPE, 0xE0, struct mc_command) ++ ++#endif /* _FSL_MC_IOCTL_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/mc-restool.c +@@ -0,0 +1,392 @@ ++/* ++ * Freescale Management Complex (MC) restool driver ++ * ++ * Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * Author: Lijun Pan ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#include "../include/mc-private.h" ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "mc-ioctl.h" ++#include "../include/mc-sys.h" ++#include "../include/mc-cmd.h" ++#include "../include/dpmng.h" ++ ++/** ++ * Maximum number of DPRCs that can be opened at the same time ++ */ ++#define MAX_DPRC_HANDLES 64 ++ ++/** ++ * restool_misc - information associated with the newly added miscdevice ++ * @misc: newly created miscdevice associated with root dprc ++ * @miscdevt: device id of this miscdevice ++ * @list: a linked list node representing this miscdevcie ++ * @static_mc_io: pointer to the static MC I/O object used by the restool ++ * @dynamic_instance_count: number of dynamically created instances ++ * @static_instance_in_use: static instance is in use or not ++ * @mutex: mutex lock to serialze the open/release operations ++ * @dev: root dprc associated with this miscdevice ++ */ ++struct restool_misc { ++ struct miscdevice misc; ++ dev_t miscdevt; ++ struct list_head list; ++ struct fsl_mc_io *static_mc_io; ++ u32 dynamic_instance_count; ++ bool static_instance_in_use; ++ struct mutex mutex; /* serialze the open/release operations */ ++ struct device *dev; ++}; ++ ++/* ++ * initialize a global list to link all ++ * the miscdevice nodes (struct restool_misc) ++ */ ++static LIST_HEAD(misc_list); ++static DEFINE_MUTEX(misc_list_mutex); ++ ++static int fsl_mc_restool_dev_open(struct inode *inode, struct file *filep) ++{ ++ struct fsl_mc_device *root_mc_dev; ++ int error; ++ struct fsl_mc_io *dynamic_mc_io = NULL; ++ struct restool_misc *restool_misc = NULL; ++ struct restool_misc *restool_misc_cursor; ++ ++ mutex_lock(&misc_list_mutex); ++ ++ list_for_each_entry(restool_misc_cursor, &misc_list, list) { ++ if (restool_misc_cursor->miscdevt == inode->i_rdev) { ++ restool_misc = restool_misc_cursor; ++ break; ++ } ++ } ++ ++ mutex_unlock(&misc_list_mutex); ++ ++ if (!restool_misc) ++ return -EINVAL; ++ ++ if (WARN_ON(!restool_misc->dev)) ++ return -EINVAL; ++ ++ mutex_lock(&restool_misc->mutex); ++ ++ if (!restool_misc->static_instance_in_use) { ++ restool_misc->static_instance_in_use = true; ++ filep->private_data = restool_misc->static_mc_io; ++ } else { ++ dynamic_mc_io = kzalloc(sizeof(*dynamic_mc_io), GFP_KERNEL); ++ if (!dynamic_mc_io) { ++ error = -ENOMEM; ++ goto err_unlock; ++ } ++ ++ root_mc_dev = to_fsl_mc_device(restool_misc->dev); ++ error = fsl_mc_portal_allocate(root_mc_dev, 0, &dynamic_mc_io); ++ if (error < 0) { ++ pr_err("Not able to allocate MC portal\n"); ++ goto free_dynamic_mc_io; ++ } ++ ++restool_misc->dynamic_instance_count; ++ filep->private_data = dynamic_mc_io; ++ } ++ ++ mutex_unlock(&restool_misc->mutex); ++ ++ return 0; ++ ++free_dynamic_mc_io: ++ kfree(dynamic_mc_io); ++err_unlock: ++ mutex_unlock(&restool_misc->mutex); ++ ++ return error; ++} ++ ++static int fsl_mc_restool_dev_release(struct inode *inode, struct file *filep) ++{ ++ struct fsl_mc_io *local_mc_io = filep->private_data; ++ struct restool_misc *restool_misc = NULL; ++ struct restool_misc *restool_misc_cursor; ++ ++ if (WARN_ON(!filep->private_data)) ++ return -EINVAL; ++ ++ mutex_lock(&misc_list_mutex); ++ ++ list_for_each_entry(restool_misc_cursor, &misc_list, list) { ++ if (restool_misc_cursor->miscdevt == inode->i_rdev) { ++ restool_misc = restool_misc_cursor; ++ break; ++ } ++ } ++ ++ mutex_unlock(&misc_list_mutex); ++ ++ if (!restool_misc) ++ return -EINVAL; ++ ++ mutex_lock(&restool_misc->mutex); ++ ++ if (WARN_ON(restool_misc->dynamic_instance_count == 0 && ++ !restool_misc->static_instance_in_use)) { ++ mutex_unlock(&restool_misc->mutex); ++ return -EINVAL; ++ } ++ ++ /* Globally clean up opened/untracked handles */ ++ fsl_mc_portal_reset(local_mc_io); ++ ++ /* ++ * must check ++ * whether local_mc_io is dynamic or static instance ++ * Otherwise it will free up the reserved portal by accident ++ * or even not free up the dynamic allocated portal ++ * if 2 or more instances running concurrently ++ */ ++ if (local_mc_io == restool_misc->static_mc_io) { ++ restool_misc->static_instance_in_use = false; ++ } else { ++ fsl_mc_portal_free(local_mc_io); ++ kfree(filep->private_data); ++ --restool_misc->dynamic_instance_count; ++ } ++ ++ filep->private_data = NULL; ++ mutex_unlock(&restool_misc->mutex); ++ ++ return 0; ++} ++ ++static int restool_send_mc_command(unsigned long arg, ++ struct fsl_mc_io *local_mc_io) ++{ ++ int error; ++ struct mc_command mc_cmd; ++ ++ if (copy_from_user(&mc_cmd, (void __user *)arg, sizeof(mc_cmd))) ++ return -EFAULT; ++ ++ /* ++ * Send MC command to the MC: ++ */ ++ error = mc_send_command(local_mc_io, &mc_cmd); ++ if (error < 0) ++ return error; ++ ++ if (copy_to_user((void __user *)arg, &mc_cmd, sizeof(mc_cmd))) ++ return -EFAULT; ++ ++ return 0; ++} ++ ++static long ++fsl_mc_restool_dev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int error; ++ ++ switch (cmd) { ++ case RESTOOL_SEND_MC_COMMAND: ++ error = restool_send_mc_command(arg, file->private_data); ++ break; ++ default: ++ pr_err("%s: unexpected ioctl call number\n", __func__); ++ error = -EINVAL; ++ } ++ ++ return error; ++} ++ ++static const struct file_operations fsl_mc_restool_dev_fops = { ++ .owner = THIS_MODULE, ++ .open = fsl_mc_restool_dev_open, ++ .release = fsl_mc_restool_dev_release, ++ .unlocked_ioctl = fsl_mc_restool_dev_ioctl, ++}; ++ ++static int restool_add_device_file(struct device *dev) ++{ ++ u32 name1 = 0; ++ char name2[20] = {0}; ++ int error; ++ struct fsl_mc_device *root_mc_dev; ++ struct restool_misc *restool_misc; ++ ++ if (dev->bus == &platform_bus_type && dev->driver_data) { ++ if (sscanf(dev_name(dev), "%x.%s", &name1, name2) != 2) ++ return -EINVAL; ++ ++ if (strcmp(name2, "fsl-mc") == 0) ++ pr_debug("platform's root dprc name is: %s\n", ++ dev_name(&(((struct fsl_mc *) ++ (dev->driver_data))->root_mc_bus_dev->dev))); ++ } ++ ++ if (!fsl_mc_is_root_dprc(dev)) ++ return 0; ++ ++ restool_misc = kzalloc(sizeof(*restool_misc), GFP_KERNEL); ++ if (!restool_misc) ++ return -ENOMEM; ++ ++ restool_misc->dev = dev; ++ root_mc_dev = to_fsl_mc_device(dev); ++ error = fsl_mc_portal_allocate(root_mc_dev, 0, ++ &restool_misc->static_mc_io); ++ if (error < 0) { ++ pr_err("Not able to allocate MC portal\n"); ++ goto free_restool_misc; ++ } ++ ++ restool_misc->misc.minor = MISC_DYNAMIC_MINOR; ++ restool_misc->misc.name = dev_name(dev); ++ restool_misc->misc.fops = &fsl_mc_restool_dev_fops; ++ ++ error = misc_register(&restool_misc->misc); ++ if (error < 0) { ++ pr_err("misc_register() failed: %d\n", error); ++ goto free_portal; ++ } ++ ++ restool_misc->miscdevt = restool_misc->misc.this_device->devt; ++ mutex_init(&restool_misc->mutex); ++ mutex_lock(&misc_list_mutex); ++ list_add(&restool_misc->list, &misc_list); ++ mutex_unlock(&misc_list_mutex); ++ ++ pr_info("/dev/%s driver registered\n", dev_name(dev)); ++ ++ return 0; ++ ++free_portal: ++ fsl_mc_portal_free(restool_misc->static_mc_io); ++free_restool_misc: ++ kfree(restool_misc); ++ ++ return error; ++} ++ ++static int restool_bus_notifier(struct notifier_block *nb, ++ unsigned long action, void *data) ++{ ++ int error; ++ struct device *dev = data; ++ ++ switch (action) { ++ case BUS_NOTIFY_ADD_DEVICE: ++ error = restool_add_device_file(dev); ++ if (error) ++ return error; ++ break; ++ case BUS_NOTIFY_DEL_DEVICE: ++ case BUS_NOTIFY_REMOVED_DEVICE: ++ case BUS_NOTIFY_BIND_DRIVER: ++ case BUS_NOTIFY_BOUND_DRIVER: ++ case BUS_NOTIFY_UNBIND_DRIVER: ++ case BUS_NOTIFY_UNBOUND_DRIVER: ++ break; ++ default: ++ pr_err("%s: unrecognized device action from %s\n", __func__, ++ dev_name(dev)); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int add_to_restool(struct device *dev, void *data) ++{ ++ return restool_add_device_file(dev); ++} ++ ++static int __init fsl_mc_restool_driver_init(void) ++{ ++ int error; ++ struct notifier_block *nb; ++ ++ nb = kzalloc(sizeof(*nb), GFP_KERNEL); ++ if (!nb) ++ return -ENOMEM; ++ ++ nb->notifier_call = restool_bus_notifier; ++ error = bus_register_notifier(&fsl_mc_bus_type, nb); ++ if (error) ++ goto free_nb; ++ ++ /* ++ * This driver runs after fsl-mc bus driver runs. ++ * Hence, many of the root dprcs are already attached to fsl-mc bus ++ * In order to make sure we find all the root dprcs, ++ * we need to scan the fsl_mc_bus_type. ++ */ ++ error = bus_for_each_dev(&fsl_mc_bus_type, NULL, NULL, add_to_restool); ++ if (error) { ++ bus_unregister_notifier(&fsl_mc_bus_type, nb); ++ kfree(nb); ++ pr_err("restool driver registration failure\n"); ++ return error; ++ } ++ ++ return 0; ++ ++free_nb: ++ kfree(nb); ++ return error; ++} ++ ++module_init(fsl_mc_restool_driver_init); ++ ++static void __exit fsl_mc_restool_driver_exit(void) ++{ ++ struct restool_misc *restool_misc; ++ struct restool_misc *restool_misc_tmp; ++ char name1[20] = {0}; ++ u32 name2 = 0; ++ ++ list_for_each_entry_safe(restool_misc, restool_misc_tmp, ++ &misc_list, list) { ++ if (sscanf(restool_misc->misc.name, "%4s.%u", name1, &name2) ++ != 2) ++ continue; ++ ++ pr_debug("name1=%s,name2=%u\n", name1, name2); ++ pr_debug("misc-device: %s\n", restool_misc->misc.name); ++ if (strcmp(name1, "dprc") != 0) ++ continue; ++ ++ if (WARN_ON(!restool_misc->static_mc_io)) ++ return; ++ ++ if (WARN_ON(restool_misc->dynamic_instance_count != 0)) ++ return; ++ ++ if (WARN_ON(restool_misc->static_instance_in_use)) ++ return; ++ ++ misc_deregister(&restool_misc->misc); ++ pr_info("/dev/%s driver unregistered\n", ++ restool_misc->misc.name); ++ fsl_mc_portal_free(restool_misc->static_mc_io); ++ list_del(&restool_misc->list); ++ kfree(restool_misc); ++ } ++} ++ ++module_exit(fsl_mc_restool_driver_exit); ++ ++MODULE_AUTHOR("Freescale Semiconductor Inc."); ++MODULE_DESCRIPTION("Freescale's MC restool driver"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/layerscape/patches-4.4/7198-staging-fsl-mc-dpio-services-driver.patch b/target/linux/layerscape/patches-4.4/7198-staging-fsl-mc-dpio-services-driver.patch new file mode 100644 index 0000000000..7613d0a631 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7198-staging-fsl-mc-dpio-services-driver.patch @@ -0,0 +1,8943 @@ +From 331b26080961f0289c3a8a8e5e65f6524b23be19 Mon Sep 17 00:00:00 2001 +From: Jeffrey Ladouceur +Date: Tue, 7 Apr 2015 23:24:55 -0400 +Subject: [PATCH 198/226] staging: fsl-mc: dpio services driver +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is a commit of a squash of the cummulative dpio services patches +in the sdk 2.0 kernel as of 3/7/2016. + +staging: fsl-mc: dpio: initial implementation of dpio services + +* Port from kernel 3.16 to 3.19 +* upgrade to match MC fw 7.0.0 +* return -EPROBE_DEFER if fsl_mc_portal_allocate() fails. +* enable DPIO interrupt support +* implement service FQDAN handling +* DPIO service selects DPIO objects using crude algorithms for now, we + will look to make this smarter later on. +* Locks all DPIO ops that aren't innately lockless. Smarter selection + logic may allow locking to be relaxed eventually. +* Portable QBMan driver source (and low-level MC flib code for DPIO) is + included and encapsulated within the DPIO driver. + +Signed-off-by: Geoff Thorpe +Signed-off-by: Haiying Wang +Signed-off-by: Roy Pledge +Signed-off-by: Bogdan Hamciuc +Signed-off-by: Ioana Radulescu +Signed-off-by: Cristian Sovaiala +Signed-off-by: J. German Rivera +Signed-off-by: Jeffrey Ladouceur +[Stuart: resolved merge conflicts] +Signed-off-by: Stuart Yoder + +dpio: Use locks when querying fq state + +merged from patch in 3.19-bringup branch. + +Signed-off-by: Ioana Radulescu +Signed-off-by: Jeffrey Ladouceur +Change-Id: Ia4d09f8a0cf4d8a4a2aa1cb39be789c34425286d +Reviewed-on: http://git.am.freescale.net:8181/34707 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Haiying Wang +Reviewed-by: Stuart Yoder + +qbman: Fix potential race in VDQCR handling + +Remove atomic_read() check of the VDQCR busy marker. These checks were racy +as the flag could be incorrectly cleared if checked while another thread was +starting a pull command. The check is unneeded since we can determine the +owner of the outstanding pull command through other means. + +Signed-off-by: Roy Pledge +Change-Id: Icc64577c0a4ce6dadef208975e980adfc6796c86 +Reviewed-on: http://git.am.freescale.net:8181/34705 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Haiying Wang +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +dpio: Fix IRQ handler and remove useless spinlock + +The IRQ handler for a threaded IRQ requires two parts: initally the handler +should check status and inhibit the IRQ then the threaded portion should +process and reenable. + +Also remove a spinlock that was redundant with the QMan driver and a debug +check that could trigger under a race condition + +Signed-off-by: Roy Pledge +Signed-off-by: Jeffrey Ladouceur +Change-Id: I64926583af0be954228de94ae354fa005c8ec88a +Reviewed-on: http://git.am.freescale.net:8181/34706 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Haiying Wang +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +staging: fsl-mc: dpio: Implement polling if IRQ not available + +Temporarly add a polling mode to DPIO in the case that the IRQ +registration fails + +Signed-off-by: Roy Pledge +Change-Id: Iebbd488fd14dd9878ef846e40f3ebcbcd0eb1e80 +Reviewed-on: http://git.am.freescale.net:8181/34775 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Jeffrey Ladouceur +Reviewed-by: Stuart Yoder + +fsl-mc-dpio: Fix to make this work without interrupt + +Some additional fixes to make dpio driver work in poll mode. +This is needed for direct assignment to KVM Guest. + +Signed-off-by: Bharat Bhushan +Change-Id: Icf66b8c0c7f7e1610118f78396534c067f594934 +Reviewed-on: http://git.am.freescale.net:8181/35333 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +fsl-mc-dpio: Make QBMan token tracking internal + +Previousy the QBMan portal code required the caller to properly set and +check for a token value used by the driver to detect when the QMan +hardware had completed a dequeue. This patch simplifes the driver +interface by internally dealing with token values. The driver will now +set the token value to 0 once it has dequeued a frame while a token +value of 1 indicates the HW has completed the dequeue but SW has not +consumed the frame yet. + +Signed-off-by: Roy Pledge +Change-Id: If94d9728b0faa0fd79b47108f5cb05a425b89c18 +Reviewed-on: http://git.am.freescale.net:8181/35433 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Haiying Wang +Reviewed-by: Stuart Yoder + +fsl-mc-dpio: Distribute DPIO IRQs among cores + +Configure the DPIO IRQ affinities across all available cores + +Signed-off-by: Roy Pledge +Change-Id: Ib45968a070460b7e9410bfe6067b20ecd3524c54 +Reviewed-on: http://git.am.freescale.net:8181/35540 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Haiying Wang +Reviewed-by: Bogdan Hamciuc +Reviewed-by: Stuart Yoder + +dpio/qbman: add flush after finishing cena write + +Signed-off-by: Haiying Wang +Change-Id: I19537f101f7f5b443d60c0ad0e5d96c1dc302223 +Reviewed-on: http://git.am.freescale.net:8181/35854 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +dpio/qbman: rename qbman_dq_entry to qbman_result + +Currently qbman_dq_entry is used for both dq result in dqrr +and memory, and notifications in dqrr and memory. It doesn't +make sense to have dq_entry in name for those notifications +which have nothing to do with dq. So we rename this as +qbman_result which is meaningful for both cases. + +Signed-off-by: Haiying Wang +Change-Id: I62b3e729c571a1195e8802a9fab3fca97a14eae4 +Reviewed-on: http://git.am.freescale.net:8181/35535 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +dpio/qbman: add APIs to parse BPSCN and CGCU + +BPSCN and CGCU are notifications which can only be written to memory. +We need to consider the host endianness while parsing these notification. +Also modify the check of FQRN/CSCN_MEM with the same consideration. + +Signed-off-by: Haiying Wang +Change-Id: I572e0aa126107aed40e1ce326d5df7956882a939 +Reviewed-on: http://git.am.freescale.net:8181/35536 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +dpio/qbman: remove EXPORT_SYMBOL for qbman APIs + +because they are only used by dpio. + +Signed-off-by: Haiying Wang +Change-Id: I12e7b81c2d32f3c7b3df9fd73b742b1b675f4b8b +Reviewed-on: http://git.am.freescale.net:8181/35537 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +dpio/qbman: add invalidate and prefetch support + +for cachable memory access. +Also remove the redundant memory barriers. + +Signed-off-by: Haiying Wang +Change-Id: I452a768278d1c5ef37e5741e9b011d725cb57b30 +Reviewed-on: http://git.am.freescale.net:8181/35873 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +dpio-driver: Fix qman-portal interrupt masking in poll mode + +DPIO driver should mask qman-portal interrupt reporting When +working in poll mode. has_irq flag is used for same, but +interrupt maksing was happening before it was decided that +system will work in poll mode of interrupt mode. + +This patch fixes the issue and not irq masking/enabling is +happening after irq/poll mode is decided. + +Signed-off-by: Bharat Bhushan +Change-Id: I44de07b6142e80b3daea45e7d51a2d2799b2ed8d +Reviewed-on: http://git.am.freescale.net:8181/37100 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder +(cherry picked from commit 3579244250dcb287a0fe58bcc3b3780076d040a2) + +dpio: Add a function to query buffer pool depth + +Add a debug function thay allows users to query the number +of buffers in a specific buffer pool + +Signed-off-by: Roy Pledge +Change-Id: Ie9a5f2e86d6a04ae61868bcc807121780c53cf6c +Reviewed-on: http://git.am.freescale.net:8181/36069 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder +(cherry picked from commit 3c749d860592f62f6b219232580ca35fd1075337) + +dpio: Use normal cachable non-shareable memory for qbman cena + +QBMan SWP CENA portal memory requires the memory to be cacheable, +and non-shareable. + +Signed-off-by: Haiying Wang +Change-Id: I1c01cffe9ff2503fea2396d7cc761508f6e1ca85 +Reviewed-on: http://git.am.freescale.net:8181/35487 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder +(cherry picked from commit 2a7e1ede7e155d9219006999893912e0b029ce4c) + +fsl-dpio: Process frames in IRQ context + +Stop using threaded IRQs and move back to hardirq top-halves. +This is the first patch of a small series adapting the DPIO and Ethernet +code to these changes. + +Signed-off-by: Roy Pledge +Tested-by: Ioana Radulescu +Tested-by: Bogdan Hamciuc +Tested-by: Review Code-CDREVIEW +Reviewed-by: Bogdan Hamciuc +Reviewed-by: Stuart Yoder +[Stuart: split out dpaa-eth part separately] +Signed-off-by: Stuart Yoder + +fsl-dpio: Fast DPIO object selection + +The DPIO service code had a couple of problems with performance impact: + - The DPIO service object was protected by a global lock, within + functions called from the fast datapath on multiple CPUs. + - The DPIO service code would iterate unnecessarily through its linked + list, while most of the time it looks for CPU-bound objects. + +Add a fast-access array pointing to the same dpaa_io objects as the DPIO +service's linked list, used in non-preemptible contexts. +Avoid list access/reordering if a specific CPU was requested. This +greatly limits contention on the global service lock. +Make explicit calls for per-CPU DPIO service objects if the current +context permits (which is the case on most of the Ethernet fastpath). + +These changes incidentally fix a functional problem, too: according to +the specification of struct dpaa_io_notification_ctx, registration should +fail if the specification of 'desired_cpu' cannot be observed. Instead, +dpaa_io_service_register() would keep searching for non-affine DPIO +objects, even when that was not requested. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I2dd78bc56179f97d3fd78052a653456e5f89ed82 +Reviewed-on: http://git.am.freescale.net:8181/37689 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +DPIO: Implement a missing lock in DPIO + +Implement missing DPIO service notification deregistration lock + +Signed-off-by: Roy Pledge +Change-Id: Ida9a4d00cc3a66bc215c260a8df2b197366736f7 +Reviewed-on: http://git.am.freescale.net:8181/38497 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Haiying Wang +Reviewed-by: Stuart Yoder + +staging: fsl-mc: migrated dpio flibs for MC fw 8.0.0 + +Signed-off-by: Stuart Yoder + +fsl_qbman: Ensure SDQCR is only enabled if a channel is selected + +QMan HW considers an SDQCR command that does not indicate any +channels to dequeue from to be an error. This change ensures that +a NULL command is set in the case no channels are selected for dequeue + +Signed-off-by: Roy Pledge +Change-Id: I8861304881885db00df4a29d760848990d706c70 +Reviewed-on: http://git.am.freescale.net:8181/38498 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Haiying Wang +Reviewed-by: Stuart Yoder + +flib: dpio: Fix compiler warning. + +Gcc takes the credit here. +To be merged with other fixes on this branch. + +Signed-off-by: Bogdan Hamciuc +Change-Id: If81f35ab3e8061aae1e03b72ab16a4c1dc390c3a +Reviewed-on: http://git.am.freescale.net:8181/39148 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +staging: fsl-mc: dpio: remove programing of MSIs in dpio driver + +this is now handled in the bus driver + +Signed-off-by: Stuart Yoder + +fsl_qbman: Enable CDAN generation + +Enable CDAN notificiation registration in both QBMan and DPIO + +Signed-off-by: Roy Pledge + +fsl_dpio: Implement API to dequeue from a channel + +Implement an API that allows users to dequeue from a channel + +Signed-off-by: Roy Pledge + +fsl-dpio: Change dequeue command type + +For now CDANs don't work with priority precedence. + +Signed-off-by: Ioana Radulescu + +fsl-dpio: Export FQD context getter function + +Signed-off-by: Ioana Radulescu + +fsl_dpio: Fix DPIO polling thread logic + +Fix the logic for the DPIO polling logic and ensure the thread +is not parked + +Signed-off-by: Roy Pledge +[Stuart: fixed typo in comment] +Signed-off-by: Stuart Yoder + +fsl-dpio,qbman: Export functions + +A few of the functions used by the Ethernet driver were not exported +yet. Needed in order to compile Eth driver as a module. + +Signed-off-by: Ioana Radulescu +Signed-off-by: Stuart Yoder + +fsl_qbman: Use proper accessors when reading QBMan portals + +Use accessors that properly byteswap when accessing QBMan portals + +Signed-off-by: Roy Pledge + +fsl_qbman: Fix encoding of 64 byte values + +The QBMan driver encodes commands in 32 bit host endianess then +coverts to little endian before sending to HW. This means 64 +byte values need to be encoded so that the values will be +correctly swapped when the commands are written to HW. + +Signed-off-by: Roy Pledge + +dpaa_fd: Add functions for SG entries endianness conversions + +Scatter gather entries are little endian at the hardware level. +Add functions for converting the SG entry structure to cpu +endianness to avoid incorrect behaviour on BE kernels. + +Signed-off-by: Ioana Radulescu + +fsl_dpaa: update header files with kernel-doc format + +Signed-off-by: Haiying Wang + +qbman: update header fiels to follow kernel-doc format + +Plus rename orp_id as opr_id based on the BG. + +Signed-off-by: Haiying Wang + +fsl/dpio: rename ldpaa to dpaa2 + +Signed-off-by: Haiying Wang +(Stuart: removed eth part out into separate patch) +Signed-off-by: Stuart Yoder + +qbman_test: update qbman_test + +- Update to sync with latest change in qbman driver. +- Add bpscn test case + +Signed-off-by: Haiying Wang + +fsl-dpio: add FLE (Frame List Entry) for FMT=dpaa_fd_list support + +Signed-off-by: Horia Geantă + +fsl-dpio: add accessors for FD[FRC] + +Signed-off-by: Horia Geantă + +fsl-dpio: add accessors for FD[FLC] + +Signed-off-by: Horia Geantă +(Stuart: corrected typo in subject) +Signed-off-by: Stuart Yoder + +fsl/dpio: dpaa2_fd: Add the comments for newly added APIs. + +Signed-off-by: Haiying Wang +[Stuart: added fsl/dpio prefix on commit subject] +Signed-off-by: Stuart Yoder + +fsl-dpio: rename dpaa_* structure to dpaa2_* + +Signed-off-by: Haiying Wang +(Stuart: split eth and caam parts out into separate patches) +Signed-off-by: Stuart Yoder + +fsl-dpio: update the header file with more description in comments + +plus fix some typos. + +Signed-off-by: Haiying Wang +Signed-off-by: Roy Pledge + +fsl-dpio: fix Klocwork issues. + +Signed-off-by: Haiying Wang + +fsl_dpio: Fix kernel doc issues and add an overview + +Signed-off-by: Roy Pledge + +fsl-dpio,qbman: Prefer affine portal to acquire/release buffers + +The FQ enqueue/dequeue DPIO code attempts to select an affine QBMan +portal in order to minimize contention (under the assumption that most +of the calling code runs in affine contexts). Doing the same now for +buffer acquire/release. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpio: prefer affine QBMan portal in dpaa2_io_service_enqueue_fq + +Commit 7b057d9bc3d31 ("fsl-dpio: Fast DPIO object selection") +took care of dpaa2_io_service_enqueue_qd, missing +dpaa2_io_service_enqueue_fq. + +Cc: Bogdan Hamciuc +Signed-off-by: Horia Geantă + +fsl/dpio: update the dpio flib files from mc9.0.0 release + +Signed-off-by: Haiying Wang + +fsl/dpio: pass qman_version from dpio attributes to swp desc + +Signed-off-by: Haiying Wang + +fsl/dpio/qbman: Use qman version to determin dqrr size + +Signed-off-by: Haiying Wang + +fsl-dpio: Fix dequeue type enum values + +enum qbman_pull_type_e did not follow the volatile dequeue command +specification, for which VERB=b'00 is a valid value (but of no +interest to us). + +Signed-off-by: Bogdan Hamciuc +Signed-off-by: Roy Pledge + +fsl-dpio: Volatile dequeue with priority precedence + +Use priority precedence to do volatile dequeue from channels, rather +than active FQ precedence. + +Signed-off-by: Bogdan Hamciuc +Signed-off-by: Roy Pledge + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/Kconfig | 16 + + drivers/staging/fsl-mc/bus/Makefile | 3 + + drivers/staging/fsl-mc/bus/dpio/Makefile | 9 + + drivers/staging/fsl-mc/bus/dpio/dpio-drv.c | 405 +++++++ + drivers/staging/fsl-mc/bus/dpio/dpio-drv.h | 33 + + drivers/staging/fsl-mc/bus/dpio/dpio.c | 468 ++++++++ + drivers/staging/fsl-mc/bus/dpio/dpio_service.c | 801 +++++++++++++ + drivers/staging/fsl-mc/bus/dpio/fsl_dpio.h | 460 ++++++++ + drivers/staging/fsl-mc/bus/dpio/fsl_dpio_cmd.h | 184 +++ + drivers/staging/fsl-mc/bus/dpio/fsl_qbman_base.h | 123 ++ + drivers/staging/fsl-mc/bus/dpio/fsl_qbman_portal.h | 753 ++++++++++++ + drivers/staging/fsl-mc/bus/dpio/qbman_debug.c | 846 ++++++++++++++ + drivers/staging/fsl-mc/bus/dpio/qbman_debug.h | 136 +++ + drivers/staging/fsl-mc/bus/dpio/qbman_portal.c | 1212 ++++++++++++++++++++ + drivers/staging/fsl-mc/bus/dpio/qbman_portal.h | 261 +++++ + drivers/staging/fsl-mc/bus/dpio/qbman_private.h | 173 +++ + drivers/staging/fsl-mc/bus/dpio/qbman_sys.h | 307 +++++ + drivers/staging/fsl-mc/bus/dpio/qbman_sys_decl.h | 86 ++ + drivers/staging/fsl-mc/bus/dpio/qbman_test.c | 664 +++++++++++ + drivers/staging/fsl-mc/include/fsl_dpaa2_fd.h | 774 +++++++++++++ + drivers/staging/fsl-mc/include/fsl_dpaa2_io.h | 619 ++++++++++ + 21 files changed, 8333 insertions(+) + create mode 100644 drivers/staging/fsl-mc/bus/dpio/Makefile + create mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio-drv.c + create mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio-drv.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio.c + create mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio_service.c + create mode 100644 drivers/staging/fsl-mc/bus/dpio/fsl_dpio.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/fsl_dpio_cmd.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/fsl_qbman_base.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/fsl_qbman_portal.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman_debug.c + create mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman_debug.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman_portal.c + create mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman_portal.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman_private.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman_sys.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman_sys_decl.h + create mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman_test.c + create mode 100644 drivers/staging/fsl-mc/include/fsl_dpaa2_fd.h + create mode 100644 drivers/staging/fsl-mc/include/fsl_dpaa2_io.h + +--- a/drivers/staging/fsl-mc/bus/Kconfig ++++ b/drivers/staging/fsl-mc/bus/Kconfig +@@ -28,3 +28,19 @@ config FSL_MC_RESTOOL + help + Driver that provides kernel support for the Freescale Management + Complex resource manager user-space tool. ++ ++config FSL_MC_DPIO ++ tristate "Freescale Data Path I/O (DPIO) driver" ++ depends on FSL_MC_BUS ++ help ++ Driver for Freescale Data Path I/O (DPIO) devices. ++ A DPIO device provides queue and buffer management facilities ++ for software to interact with other Data Path devices. This ++ driver does not expose the DPIO device individually, but ++ groups them under a service layer API. ++ ++config FSL_QBMAN_DEBUG ++ tristate "Freescale QBMAN Debug APIs" ++ depends on FSL_MC_DPIO ++ help ++ QBMan debug assistant APIs. +--- a/drivers/staging/fsl-mc/bus/Makefile ++++ b/drivers/staging/fsl-mc/bus/Makefile +@@ -21,3 +21,6 @@ mc-bus-driver-objs := mc-bus.o \ + + # MC restool kernel support + obj-$(CONFIG_FSL_MC_RESTOOL) += mc-restool.o ++ ++# MC DPIO driver ++obj-$(CONFIG_FSL_MC_DPIO) += dpio/ +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/Makefile +@@ -0,0 +1,9 @@ ++# ++# Freescale DPIO driver ++# ++ ++obj-$(CONFIG_FSL_MC_BUS) += fsl-dpio-drv.o ++ ++fsl-dpio-drv-objs := dpio-drv.o dpio_service.o dpio.o qbman_portal.o ++ ++obj-$(CONFIG_FSL_QBMAN_DEBUG) += qbman_debug.o +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/dpio-drv.c +@@ -0,0 +1,405 @@ ++/* Copyright 2014 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../../include/mc.h" ++#include "../../include/fsl_dpaa2_io.h" ++ ++#include "fsl_qbman_portal.h" ++#include "fsl_dpio.h" ++#include "fsl_dpio_cmd.h" ++ ++#include "dpio-drv.h" ++ ++#define DPIO_DESCRIPTION "DPIO Driver" ++ ++MODULE_LICENSE("Dual BSD/GPL"); ++MODULE_AUTHOR("Freescale Semiconductor, Inc"); ++MODULE_DESCRIPTION(DPIO_DESCRIPTION); ++ ++#define MAX_DPIO_IRQ_NAME 16 /* Big enough for "FSL DPIO %d" */ ++ ++struct dpio_priv { ++ struct dpaa2_io *io; ++ char irq_name[MAX_DPIO_IRQ_NAME]; ++ struct task_struct *thread; ++}; ++ ++static int dpio_thread(void *data) ++{ ++ struct dpaa2_io *io = data; ++ ++ while (!kthread_should_stop()) { ++ int err = dpaa2_io_poll(io); ++ ++ if (err) { ++ pr_err("dpaa2_io_poll() failed\n"); ++ return err; ++ } ++ msleep(50); ++ } ++ return 0; ++} ++ ++static irqreturn_t dpio_irq_handler(int irq_num, void *arg) ++{ ++ struct device *dev = (struct device *)arg; ++ struct dpio_priv *priv = dev_get_drvdata(dev); ++ ++ return dpaa2_io_irq(priv->io); ++} ++ ++static void unregister_dpio_irq_handlers(struct fsl_mc_device *ls_dev) ++{ ++ int i; ++ struct fsl_mc_device_irq *irq; ++ int irq_count = ls_dev->obj_desc.irq_count; ++ ++ for (i = 0; i < irq_count; i++) { ++ irq = ls_dev->irqs[i]; ++ devm_free_irq(&ls_dev->dev, irq->msi_desc->irq, &ls_dev->dev); ++ } ++} ++ ++static int register_dpio_irq_handlers(struct fsl_mc_device *ls_dev, int cpu) ++{ ++ struct dpio_priv *priv; ++ unsigned int i; ++ int error; ++ struct fsl_mc_device_irq *irq; ++ unsigned int num_irq_handlers_registered = 0; ++ int irq_count = ls_dev->obj_desc.irq_count; ++ cpumask_t mask; ++ ++ priv = dev_get_drvdata(&ls_dev->dev); ++ ++ if (WARN_ON(irq_count != 1)) ++ return -EINVAL; ++ ++ for (i = 0; i < irq_count; i++) { ++ irq = ls_dev->irqs[i]; ++ error = devm_request_irq(&ls_dev->dev, ++ irq->msi_desc->irq, ++ dpio_irq_handler, ++ 0, ++ priv->irq_name, ++ &ls_dev->dev); ++ if (error < 0) { ++ dev_err(&ls_dev->dev, ++ "devm_request_irq() failed: %d\n", ++ error); ++ goto error_unregister_irq_handlers; ++ } ++ ++ /* Set the IRQ affinity */ ++ cpumask_clear(&mask); ++ cpumask_set_cpu(cpu, &mask); ++ if (irq_set_affinity(irq->msi_desc->irq, &mask)) ++ pr_err("irq_set_affinity failed irq %d cpu %d\n", ++ irq->msi_desc->irq, cpu); ++ ++ num_irq_handlers_registered++; ++ } ++ ++ return 0; ++ ++error_unregister_irq_handlers: ++ for (i = 0; i < num_irq_handlers_registered; i++) { ++ irq = ls_dev->irqs[i]; ++ devm_free_irq(&ls_dev->dev, irq->msi_desc->irq, ++ &ls_dev->dev); ++ } ++ ++ return error; ++} ++ ++static int __cold ++dpaa2_dpio_probe(struct fsl_mc_device *ls_dev) ++{ ++ struct dpio_attr dpio_attrs; ++ struct dpaa2_io_desc desc; ++ struct dpio_priv *priv; ++ int err = -ENOMEM; ++ struct device *dev = &ls_dev->dev; ++ struct dpaa2_io *defservice; ++ bool irq_allocated = false; ++ static int next_cpu; ++ ++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ goto err_priv_alloc; ++ ++ dev_set_drvdata(dev, priv); ++ ++ err = fsl_mc_portal_allocate(ls_dev, 0, &ls_dev->mc_io); ++ if (err) { ++ dev_err(dev, "MC portal allocation failed\n"); ++ err = -EPROBE_DEFER; ++ goto err_mcportal; ++ } ++ ++ err = dpio_open(ls_dev->mc_io, 0, ls_dev->obj_desc.id, ++ &ls_dev->mc_handle); ++ if (err) { ++ dev_err(dev, "dpio_open() failed\n"); ++ goto err_open; ++ } ++ ++ err = dpio_get_attributes(ls_dev->mc_io, 0, ls_dev->mc_handle, ++ &dpio_attrs); ++ if (err) { ++ dev_err(dev, "dpio_get_attributes() failed %d\n", err); ++ goto err_get_attr; ++ } ++ err = dpio_enable(ls_dev->mc_io, 0, ls_dev->mc_handle); ++ if (err) { ++ dev_err(dev, "dpio_enable() failed %d\n", err); ++ goto err_get_attr; ++ } ++ pr_info("ce_paddr=0x%llx, ci_paddr=0x%llx, portalid=%d, prios=%d\n", ++ ls_dev->regions[0].start, ++ ls_dev->regions[1].start, ++ dpio_attrs.qbman_portal_id, ++ dpio_attrs.num_priorities); ++ ++ pr_info("ce_size=0x%llx, ci_size=0x%llx\n", ++ resource_size(&ls_dev->regions[0]), ++ resource_size(&ls_dev->regions[1])); ++ ++ desc.qman_version = dpio_attrs.qbman_version; ++ /* Build DPIO driver object out of raw MC object */ ++ desc.receives_notifications = dpio_attrs.num_priorities ? 1 : 0; ++ desc.has_irq = 1; ++ desc.will_poll = 1; ++ desc.has_8prio = dpio_attrs.num_priorities == 8 ? 1 : 0; ++ desc.cpu = next_cpu; ++ desc.stash_affinity = 1; /* TODO: Figure out how to determine ++ this setting - will we ever have non-affine ++ portals where we stash to a platform cache? */ ++ next_cpu = (next_cpu + 1) % num_active_cpus(); ++ desc.dpio_id = ls_dev->obj_desc.id; ++ desc.regs_cena = ioremap_cache_ns(ls_dev->regions[0].start, ++ resource_size(&ls_dev->regions[0])); ++ desc.regs_cinh = ioremap(ls_dev->regions[1].start, ++ resource_size(&ls_dev->regions[1])); ++ ++ err = fsl_mc_allocate_irqs(ls_dev); ++ if (err) { ++ dev_err(dev, "DPIO fsl_mc_allocate_irqs failed\n"); ++ desc.has_irq = 0; ++ } else { ++ irq_allocated = true; ++ ++ snprintf(priv->irq_name, MAX_DPIO_IRQ_NAME, "FSL DPIO %d", ++ desc.dpio_id); ++ ++ err = register_dpio_irq_handlers(ls_dev, desc.cpu); ++ if (err) ++ desc.has_irq = 0; ++ } ++ ++ priv->io = dpaa2_io_create(&desc); ++ if (!priv->io) { ++ dev_err(dev, "DPIO setup failed\n"); ++ goto err_dpaa2_io_create; ++ } ++ ++ /* If no irq then go to poll mode */ ++ if (desc.has_irq == 0) { ++ dev_info(dev, "Using polling mode for DPIO %d\n", ++ desc.dpio_id); ++ /* goto err_register_dpio_irq; */ ++ /* TEMP: Start polling if IRQ could not ++ be registered. This will go away once ++ KVM support for MSI is present */ ++ if (irq_allocated == true) ++ fsl_mc_free_irqs(ls_dev); ++ ++ if (desc.stash_affinity) ++ priv->thread = kthread_create_on_cpu(dpio_thread, ++ priv->io, ++ desc.cpu, ++ "dpio_aff%u"); ++ else ++ priv->thread = ++ kthread_create(dpio_thread, ++ priv->io, ++ "dpio_non%u", ++ dpio_attrs.qbman_portal_id); ++ if (IS_ERR(priv->thread)) { ++ dev_err(dev, "DPIO thread failure\n"); ++ err = PTR_ERR(priv->thread); ++ goto err_dpaa_thread; ++ } ++ kthread_unpark(priv->thread); ++ wake_up_process(priv->thread); ++ } ++ ++ defservice = dpaa2_io_default_service(); ++ err = dpaa2_io_service_add(defservice, priv->io); ++ dpaa2_io_down(defservice); ++ if (err) { ++ dev_err(dev, "DPIO add-to-service failed\n"); ++ goto err_dpaa2_io_add; ++ } ++ ++ dev_info(dev, "dpio: probed object %d\n", ls_dev->obj_desc.id); ++ dev_info(dev, " receives_notifications = %d\n", ++ desc.receives_notifications); ++ dev_info(dev, " has_irq = %d\n", desc.has_irq); ++ dpio_close(ls_dev->mc_io, 0, ls_dev->mc_handle); ++ fsl_mc_portal_free(ls_dev->mc_io); ++ return 0; ++ ++err_dpaa2_io_add: ++ unregister_dpio_irq_handlers(ls_dev); ++/* TEMP: To be restored once polling is removed ++ err_register_dpio_irq: ++ fsl_mc_free_irqs(ls_dev); ++*/ ++err_dpaa_thread: ++err_dpaa2_io_create: ++ dpio_disable(ls_dev->mc_io, 0, ls_dev->mc_handle); ++err_get_attr: ++ dpio_close(ls_dev->mc_io, 0, ls_dev->mc_handle); ++err_open: ++ fsl_mc_portal_free(ls_dev->mc_io); ++err_mcportal: ++ dev_set_drvdata(dev, NULL); ++ devm_kfree(dev, priv); ++err_priv_alloc: ++ return err; ++} ++ ++/* ++ * Tear down interrupts for a given DPIO object ++ */ ++static void dpio_teardown_irqs(struct fsl_mc_device *ls_dev) ++{ ++ /* (void)disable_dpio_irqs(ls_dev); */ ++ unregister_dpio_irq_handlers(ls_dev); ++ fsl_mc_free_irqs(ls_dev); ++} ++ ++static int __cold ++dpaa2_dpio_remove(struct fsl_mc_device *ls_dev) ++{ ++ struct device *dev; ++ struct dpio_priv *priv; ++ int err; ++ ++ dev = &ls_dev->dev; ++ priv = dev_get_drvdata(dev); ++ ++ /* there is no implementation yet for pulling a DPIO object out of a ++ * running service (and they're currently always running). ++ */ ++ dev_crit(dev, "DPIO unplugging is broken, the service holds onto it\n"); ++ ++ if (priv->thread) ++ kthread_stop(priv->thread); ++ else ++ dpio_teardown_irqs(ls_dev); ++ ++ err = fsl_mc_portal_allocate(ls_dev, 0, &ls_dev->mc_io); ++ if (err) { ++ dev_err(dev, "MC portal allocation failed\n"); ++ goto err_mcportal; ++ } ++ ++ err = dpio_open(ls_dev->mc_io, 0, ls_dev->obj_desc.id, ++ &ls_dev->mc_handle); ++ if (err) { ++ dev_err(dev, "dpio_open() failed\n"); ++ goto err_open; ++ } ++ ++ dev_set_drvdata(dev, NULL); ++ dpaa2_io_down(priv->io); ++ ++ err = 0; ++ ++ dpio_disable(ls_dev->mc_io, 0, ls_dev->mc_handle); ++ dpio_close(ls_dev->mc_io, 0, ls_dev->mc_handle); ++err_open: ++ fsl_mc_portal_free(ls_dev->mc_io); ++err_mcportal: ++ return err; ++} ++ ++static const struct fsl_mc_device_match_id dpaa2_dpio_match_id_table[] = { ++ { ++ .vendor = FSL_MC_VENDOR_FREESCALE, ++ .obj_type = "dpio", ++ .ver_major = DPIO_VER_MAJOR, ++ .ver_minor = DPIO_VER_MINOR ++ }, ++ { .vendor = 0x0 } ++}; ++ ++static struct fsl_mc_driver dpaa2_dpio_driver = { ++ .driver = { ++ .name = KBUILD_MODNAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = dpaa2_dpio_probe, ++ .remove = dpaa2_dpio_remove, ++ .match_id_table = dpaa2_dpio_match_id_table ++}; ++ ++static int dpio_driver_init(void) ++{ ++ int err; ++ ++ err = dpaa2_io_service_driver_init(); ++ if (!err) { ++ err = fsl_mc_driver_register(&dpaa2_dpio_driver); ++ if (err) ++ dpaa2_io_service_driver_exit(); ++ } ++ return err; ++} ++static void dpio_driver_exit(void) ++{ ++ fsl_mc_driver_unregister(&dpaa2_dpio_driver); ++ dpaa2_io_service_driver_exit(); ++} ++module_init(dpio_driver_init); ++module_exit(dpio_driver_exit); +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/dpio-drv.h +@@ -0,0 +1,33 @@ ++/* Copyright 2014 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++int dpaa2_io_service_driver_init(void); ++void dpaa2_io_service_driver_exit(void); +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/dpio.c +@@ -0,0 +1,468 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include "../../include/mc-sys.h" ++#include "../../include/mc-cmd.h" ++#include "fsl_dpio.h" ++#include "fsl_dpio_cmd.h" ++ ++int dpio_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpio_id, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_OPEN, ++ cmd_flags, ++ 0); ++ DPIO_CMD_OPEN(cmd, dpio_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpio_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_CLOSE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpio_cfg *cfg, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_CREATE, ++ cmd_flags, ++ 0); ++ DPIO_CMD_CREATE(cmd, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpio_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_DESTROY, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_ENABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_DISABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_IS_ENABLED, cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPIO_RSP_IS_ENABLED(cmd, *en); ++ ++ return 0; ++} ++ ++int dpio_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_RESET, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpio_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_SET_IRQ, ++ cmd_flags, ++ token); ++ DPIO_CMD_SET_IRQ(cmd, irq_index, irq_cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpio_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_IRQ, ++ cmd_flags, ++ token); ++ DPIO_CMD_GET_IRQ(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPIO_RSP_GET_IRQ(cmd, *type, irq_cfg); ++ ++ return 0; ++} ++ ++int dpio_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_SET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPIO_CMD_SET_IRQ_ENABLE(cmd, irq_index, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPIO_CMD_GET_IRQ_ENABLE(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPIO_RSP_GET_IRQ_ENABLE(cmd, *en); ++ ++ return 0; ++} ++ ++int dpio_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_SET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPIO_CMD_SET_IRQ_MASK(cmd, irq_index, mask); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPIO_CMD_GET_IRQ_MASK(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPIO_RSP_GET_IRQ_MASK(cmd, *mask); ++ ++ return 0; ++} ++ ++int dpio_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPIO_CMD_GET_IRQ_STATUS(cmd, irq_index, *status); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPIO_RSP_GET_IRQ_STATUS(cmd, *status); ++ ++ return 0; ++} ++ ++int dpio_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_CLEAR_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPIO_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpio_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_ATTR, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPIO_RSP_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpio_set_stashing_destination(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t sdest) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_SET_STASHING_DEST, ++ cmd_flags, ++ token); ++ DPIO_CMD_SET_STASHING_DEST(cmd, sdest); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpio_get_stashing_destination(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t *sdest) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_STASHING_DEST, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPIO_RSP_GET_STASHING_DEST(cmd, *sdest); ++ ++ return 0; ++} ++ ++int dpio_add_static_dequeue_channel(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int dpcon_id, ++ uint8_t *channel_index) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPIO_CMDID_ADD_STATIC_DEQUEUE_CHANNEL, ++ cmd_flags, ++ token); ++ DPIO_CMD_ADD_STATIC_DEQUEUE_CHANNEL(cmd, dpcon_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPIO_RSP_ADD_STATIC_DEQUEUE_CHANNEL(cmd, *channel_index); ++ ++ return 0; ++} ++ ++int dpio_remove_static_dequeue_channel(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int dpcon_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header( ++ DPIO_CMDID_REMOVE_STATIC_DEQUEUE_CHANNEL, ++ cmd_flags, ++ token); ++ DPIO_CMD_REMOVE_STATIC_DEQUEUE_CHANNEL(cmd, dpcon_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/dpio_service.c +@@ -0,0 +1,801 @@ ++/* Copyright 2014 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include ++#include "fsl_qbman_portal.h" ++#include "../../include/mc.h" ++#include "../../include/fsl_dpaa2_io.h" ++#include "fsl_dpio.h" ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "dpio-drv.h" ++#include "qbman_debug.h" ++ ++#define UNIMPLEMENTED() pr_err("FOO: %s unimplemented!\n", __func__) ++ ++#define MAGIC_SERVICE 0xabcd9876 ++#define MAGIC_OBJECT 0x1234fedc ++ ++struct dpaa2_io { ++ /* If MAGIC_SERVICE, this is a group of objects, use the 'service' part ++ * of the union. If MAGIC_OBJECT, use the 'object' part of the union. If ++ * it's neither, something got corrupted. This is mainly to satisfy ++ * dpaa2_io_from_registration(), which dereferences a caller- ++ * instantiated struct and so warrants a bug-checking step - hence the ++ * magic rather than a boolean. ++ */ ++ unsigned int magic; ++ atomic_t refs; ++ union { ++ struct dpaa2_io_service { ++ spinlock_t lock; ++ struct list_head list; ++ /* for targeted dpaa2_io selection */ ++ struct dpaa2_io *objects_by_cpu[NR_CPUS]; ++ cpumask_t cpus_notifications; ++ cpumask_t cpus_stashing; ++ int has_nonaffine; ++ /* slight hack. record the special case of the ++ * "default service", because that's the case where we ++ * need to avoid a kfree() ... */ ++ int is_defservice; ++ } service; ++ struct dpaa2_io_object { ++ struct dpaa2_io_desc dpio_desc; ++ struct qbman_swp_desc swp_desc; ++ struct qbman_swp *swp; ++ /* If the object is part of a service, this is it (and ++ * 'node' is linked into the service's list) */ ++ struct dpaa2_io *service; ++ struct list_head node; ++ /* Interrupt mask, as used with ++ * qbman_swp_interrupt_[gs]et_vanish(). This isn't ++ * locked, because the higher layer is driving all ++ * "ingress" processing. */ ++ uint32_t irq_mask; ++ /* As part of simplifying assumptions, we provide an ++ * irq-safe lock for each type of DPIO operation that ++ * isn't innately lockless. The selection algorithms ++ * (which are simplified) require this, whereas ++ * eventually adherence to cpu-affinity will presumably ++ * relax the locking requirements. */ ++ spinlock_t lock_mgmt_cmd; ++ spinlock_t lock_notifications; ++ struct list_head notifications; ++ } object; ++ }; ++}; ++ ++struct dpaa2_io_store { ++ unsigned int max; ++ dma_addr_t paddr; ++ struct dpaa2_dq *vaddr; ++ void *alloced_addr; /* the actual return from kmalloc as it may ++ be adjusted for alignment purposes */ ++ unsigned int idx; /* position of the next-to-be-returned entry */ ++ struct qbman_swp *swp; /* portal used to issue VDQCR */ ++ struct device *dev; /* device used for DMA mapping */ ++}; ++ ++static struct dpaa2_io def_serv; ++ ++/**********************/ ++/* Internal functions */ ++/**********************/ ++ ++static void service_init(struct dpaa2_io *d, int is_defservice) ++{ ++ struct dpaa2_io_service *s = &d->service; ++ ++ d->magic = MAGIC_SERVICE; ++ atomic_set(&d->refs, 1); ++ spin_lock_init(&s->lock); ++ INIT_LIST_HEAD(&s->list); ++ cpumask_clear(&s->cpus_notifications); ++ cpumask_clear(&s->cpus_stashing); ++ s->has_nonaffine = 0; ++ s->is_defservice = is_defservice; ++} ++ ++/* Selection algorithms, stupid ones at that. These are to handle the case where ++ * the given dpaa2_io is a service, by choosing the non-service dpaa2_io within ++ * it to use. ++ */ ++static struct dpaa2_io *_service_select_by_cpu_slow(struct dpaa2_io_service *ss, ++ int cpu) ++{ ++ struct dpaa2_io *o; ++ unsigned long irqflags; ++ ++ spin_lock_irqsave(&ss->lock, irqflags); ++ /* TODO: this is about the dumbest and slowest selection algorithm you ++ * could imagine. (We're looking for something working first, and ++ * something efficient second...) ++ */ ++ list_for_each_entry(o, &ss->list, object.node) ++ if (o->object.dpio_desc.cpu == cpu) ++ goto found; ++ ++ /* No joy. Try the first nonaffine portal (bleurgh) */ ++ if (ss->has_nonaffine) ++ list_for_each_entry(o, &ss->list, object.node) ++ if (!o->object.dpio_desc.stash_affinity) ++ goto found; ++ ++ /* No joy. Try the first object. Told you it was horrible. */ ++ if (!list_empty(&ss->list)) ++ o = list_entry(ss->list.next, struct dpaa2_io, object.node); ++ else ++ o = NULL; ++ ++found: ++ spin_unlock_irqrestore(&ss->lock, irqflags); ++ return o; ++} ++ ++static struct dpaa2_io *service_select_by_cpu(struct dpaa2_io *d, int cpu) ++{ ++ struct dpaa2_io_service *ss; ++ unsigned long irqflags; ++ ++ if (!d) ++ d = &def_serv; ++ else if (d->magic == MAGIC_OBJECT) ++ return d; ++ BUG_ON(d->magic != MAGIC_SERVICE); ++ ++ ss = &d->service; ++ ++ /* If cpu==-1, choose the current cpu, with no guarantees about ++ * potentially being migrated away. ++ */ ++ if (unlikely(cpu < 0)) { ++ spin_lock_irqsave(&ss->lock, irqflags); ++ cpu = smp_processor_id(); ++ spin_unlock_irqrestore(&ss->lock, irqflags); ++ ++ return _service_select_by_cpu_slow(ss, cpu); ++ } ++ ++ /* If a specific cpu was requested, pick it up immediately */ ++ return ss->objects_by_cpu[cpu]; ++} ++ ++static inline struct dpaa2_io *service_select_any(struct dpaa2_io *d) ++{ ++ struct dpaa2_io_service *ss; ++ struct dpaa2_io *o; ++ unsigned long irqflags; ++ ++ if (!d) ++ d = &def_serv; ++ else if (d->magic == MAGIC_OBJECT) ++ return d; ++ BUG_ON(d->magic != MAGIC_SERVICE); ++ ++ /* ++ * Lock the service, looking for the first DPIO object in the list, ++ * ignore everything else about that DPIO, and choose it to do the ++ * operation! As a post-selection step, move the DPIO to the end of ++ * the list. It should improve load-balancing a little, although it ++ * might also incur a performance hit, given that the lock is *global* ++ * and this may be called on the fast-path... ++ */ ++ ss = &d->service; ++ spin_lock_irqsave(&ss->lock, irqflags); ++ if (!list_empty(&ss->list)) { ++ o = list_entry(ss->list.next, struct dpaa2_io, object.node); ++ list_del(&o->object.node); ++ list_add_tail(&o->object.node, &ss->list); ++ } else ++ o = NULL; ++ spin_unlock_irqrestore(&ss->lock, irqflags); ++ return o; ++} ++ ++/* If the context is not preemptible, select the service affine to the ++ * current cpu. Otherwise, "select any". ++ */ ++static inline struct dpaa2_io *_service_select(struct dpaa2_io *d) ++{ ++ struct dpaa2_io *temp = d; ++ ++ if (likely(!preemptible())) { ++ d = service_select_by_cpu(d, smp_processor_id()); ++ if (likely(d)) ++ return d; ++ } ++ return service_select_any(temp); ++} ++ ++/**********************/ ++/* Exported functions */ ++/**********************/ ++ ++struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc) ++{ ++ struct dpaa2_io *ret = kmalloc(sizeof(*ret), GFP_KERNEL); ++ struct dpaa2_io_object *o = &ret->object; ++ ++ if (!ret) ++ return NULL; ++ ret->magic = MAGIC_OBJECT; ++ atomic_set(&ret->refs, 1); ++ o->dpio_desc = *desc; ++ o->swp_desc.cena_bar = o->dpio_desc.regs_cena; ++ o->swp_desc.cinh_bar = o->dpio_desc.regs_cinh; ++ o->swp_desc.qman_version = o->dpio_desc.qman_version; ++ o->swp = qbman_swp_init(&o->swp_desc); ++ o->service = NULL; ++ if (!o->swp) { ++ kfree(ret); ++ return NULL; ++ } ++ INIT_LIST_HEAD(&o->node); ++ spin_lock_init(&o->lock_mgmt_cmd); ++ spin_lock_init(&o->lock_notifications); ++ INIT_LIST_HEAD(&o->notifications); ++ if (!o->dpio_desc.has_irq) ++ qbman_swp_interrupt_set_vanish(o->swp, 0xffffffff); ++ else { ++ /* For now only enable DQRR interrupts */ ++ qbman_swp_interrupt_set_trigger(o->swp, ++ QBMAN_SWP_INTERRUPT_DQRI); ++ } ++ qbman_swp_interrupt_clear_status(o->swp, 0xffffffff); ++ if (o->dpio_desc.receives_notifications) ++ qbman_swp_push_set(o->swp, 0, 1); ++ return ret; ++} ++EXPORT_SYMBOL(dpaa2_io_create); ++ ++struct dpaa2_io *dpaa2_io_create_service(void) ++{ ++ struct dpaa2_io *ret = kmalloc(sizeof(*ret), GFP_KERNEL); ++ ++ if (ret) ++ service_init(ret, 0); ++ return ret; ++} ++EXPORT_SYMBOL(dpaa2_io_create_service); ++ ++struct dpaa2_io *dpaa2_io_default_service(void) ++{ ++ atomic_inc(&def_serv.refs); ++ return &def_serv; ++} ++EXPORT_SYMBOL(dpaa2_io_default_service); ++ ++void dpaa2_io_down(struct dpaa2_io *d) ++{ ++ if (!atomic_dec_and_test(&d->refs)) ++ return; ++ if (d->magic == MAGIC_SERVICE) { ++ BUG_ON(!list_empty(&d->service.list)); ++ if (d->service.is_defservice) ++ /* avoid the kfree()! */ ++ return; ++ } else { ++ BUG_ON(d->magic != MAGIC_OBJECT); ++ BUG_ON(d->object.service); ++ BUG_ON(!list_empty(&d->object.notifications)); ++ } ++ kfree(d); ++} ++EXPORT_SYMBOL(dpaa2_io_down); ++ ++int dpaa2_io_service_add(struct dpaa2_io *s, struct dpaa2_io *o) ++{ ++ struct dpaa2_io_service *ss = &s->service; ++ struct dpaa2_io_object *oo = &o->object; ++ int res = -EINVAL; ++ ++ if ((s->magic != MAGIC_SERVICE) || (o->magic != MAGIC_OBJECT)) ++ return res; ++ atomic_inc(&o->refs); ++ atomic_inc(&s->refs); ++ spin_lock(&ss->lock); ++ /* 'obj' must not already be associated with a service */ ++ if (!oo->service) { ++ oo->service = s; ++ list_add(&oo->node, &ss->list); ++ if (oo->dpio_desc.receives_notifications) { ++ cpumask_set_cpu(oo->dpio_desc.cpu, ++ &ss->cpus_notifications); ++ /* Update the fast-access array */ ++ ss->objects_by_cpu[oo->dpio_desc.cpu] = ++ container_of(oo, struct dpaa2_io, object); ++ } ++ if (oo->dpio_desc.stash_affinity) ++ cpumask_set_cpu(oo->dpio_desc.cpu, ++ &ss->cpus_stashing); ++ if (!oo->dpio_desc.stash_affinity) ++ ss->has_nonaffine = 1; ++ /* success */ ++ res = 0; ++ } ++ spin_unlock(&ss->lock); ++ if (res) { ++ dpaa2_io_down(s); ++ dpaa2_io_down(o); ++ } ++ return res; ++} ++EXPORT_SYMBOL(dpaa2_io_service_add); ++ ++int dpaa2_io_get_descriptor(struct dpaa2_io *obj, struct dpaa2_io_desc *desc) ++{ ++ if (obj->magic == MAGIC_SERVICE) ++ return -EINVAL; ++ BUG_ON(obj->magic != MAGIC_OBJECT); ++ *desc = obj->object.dpio_desc; ++ return 0; ++} ++EXPORT_SYMBOL(dpaa2_io_get_descriptor); ++ ++#define DPAA_POLL_MAX 32 ++ ++int dpaa2_io_poll(struct dpaa2_io *obj) ++{ ++ const struct dpaa2_dq *dq; ++ struct qbman_swp *swp; ++ int max = 0; ++ ++ if (obj->magic != MAGIC_OBJECT) ++ return -EINVAL; ++ swp = obj->object.swp; ++ dq = qbman_swp_dqrr_next(swp); ++ while (dq) { ++ if (qbman_result_is_SCN(dq)) { ++ struct dpaa2_io_notification_ctx *ctx; ++ uint64_t q64; ++ ++ q64 = qbman_result_SCN_ctx(dq); ++ ctx = (void *)q64; ++ ctx->cb(ctx); ++ } else ++ pr_crit("Unrecognised/ignored DQRR entry\n"); ++ qbman_swp_dqrr_consume(swp, dq); ++ ++max; ++ if (max > DPAA_POLL_MAX) ++ return 0; ++ dq = qbman_swp_dqrr_next(swp); ++ } ++ return 0; ++} ++EXPORT_SYMBOL(dpaa2_io_poll); ++ ++int dpaa2_io_irq(struct dpaa2_io *obj) ++{ ++ struct qbman_swp *swp; ++ uint32_t status; ++ ++ if (obj->magic != MAGIC_OBJECT) ++ return -EINVAL; ++ swp = obj->object.swp; ++ status = qbman_swp_interrupt_read_status(swp); ++ if (!status) ++ return IRQ_NONE; ++ dpaa2_io_poll(obj); ++ qbman_swp_interrupt_clear_status(swp, status); ++ qbman_swp_interrupt_set_inhibit(swp, 0); ++ return IRQ_HANDLED; ++} ++EXPORT_SYMBOL(dpaa2_io_irq); ++ ++int dpaa2_io_pause_poll(struct dpaa2_io *obj) ++{ ++ UNIMPLEMENTED(); ++ return -EINVAL; ++} ++EXPORT_SYMBOL(dpaa2_io_pause_poll); ++ ++int dpaa2_io_resume_poll(struct dpaa2_io *obj) ++{ ++ UNIMPLEMENTED(); ++ return -EINVAL; ++} ++EXPORT_SYMBOL(dpaa2_io_resume_poll); ++ ++void dpaa2_io_service_notifications(struct dpaa2_io *s, cpumask_t *mask) ++{ ++ struct dpaa2_io_service *ss = &s->service; ++ ++ BUG_ON(s->magic != MAGIC_SERVICE); ++ cpumask_copy(mask, &ss->cpus_notifications); ++} ++EXPORT_SYMBOL(dpaa2_io_service_notifications); ++ ++void dpaa2_io_service_stashing(struct dpaa2_io *s, cpumask_t *mask) ++{ ++ struct dpaa2_io_service *ss = &s->service; ++ ++ BUG_ON(s->magic != MAGIC_SERVICE); ++ cpumask_copy(mask, &ss->cpus_stashing); ++} ++EXPORT_SYMBOL(dpaa2_io_service_stashing); ++ ++int dpaa2_io_service_has_nonaffine(struct dpaa2_io *s) ++{ ++ struct dpaa2_io_service *ss = &s->service; ++ ++ BUG_ON(s->magic != MAGIC_SERVICE); ++ return ss->has_nonaffine; ++} ++EXPORT_SYMBOL(dpaa2_io_service_has_nonaffine); ++ ++int dpaa2_io_service_register(struct dpaa2_io *d, ++ struct dpaa2_io_notification_ctx *ctx) ++{ ++ unsigned long irqflags; ++ ++ d = service_select_by_cpu(d, ctx->desired_cpu); ++ if (!d) ++ return -ENODEV; ++ ctx->dpio_id = d->object.dpio_desc.dpio_id; ++ ctx->qman64 = (uint64_t)ctx; ++ ctx->dpio_private = d; ++ spin_lock_irqsave(&d->object.lock_notifications, irqflags); ++ list_add(&ctx->node, &d->object.notifications); ++ spin_unlock_irqrestore(&d->object.lock_notifications, irqflags); ++ if (ctx->is_cdan) ++ /* Enable the generation of CDAN notifications */ ++ qbman_swp_CDAN_set_context_enable(d->object.swp, ++ (uint16_t)ctx->id, ++ ctx->qman64); ++ return 0; ++} ++EXPORT_SYMBOL(dpaa2_io_service_register); ++ ++int dpaa2_io_service_deregister(struct dpaa2_io *service, ++ struct dpaa2_io_notification_ctx *ctx) ++{ ++ struct dpaa2_io *d = ctx->dpio_private; ++ unsigned long irqflags; ++ ++ if (!service) ++ service = &def_serv; ++ BUG_ON((service != d) && (service != d->object.service)); ++ if (ctx->is_cdan) ++ qbman_swp_CDAN_disable(d->object.swp, ++ (uint16_t)ctx->id); ++ spin_lock_irqsave(&d->object.lock_notifications, irqflags); ++ list_del(&ctx->node); ++ spin_unlock_irqrestore(&d->object.lock_notifications, irqflags); ++ return 0; ++} ++EXPORT_SYMBOL(dpaa2_io_service_deregister); ++ ++int dpaa2_io_service_rearm(struct dpaa2_io *d, ++ struct dpaa2_io_notification_ctx *ctx) ++{ ++ unsigned long irqflags; ++ int err; ++ ++ d = _service_select(d); ++ if (!d) ++ return -ENODEV; ++ spin_lock_irqsave(&d->object.lock_mgmt_cmd, irqflags); ++ if (ctx->is_cdan) ++ err = qbman_swp_CDAN_enable(d->object.swp, (uint16_t)ctx->id); ++ else ++ err = qbman_swp_fq_schedule(d->object.swp, ctx->id); ++ spin_unlock_irqrestore(&d->object.lock_mgmt_cmd, irqflags); ++ return err; ++} ++EXPORT_SYMBOL(dpaa2_io_service_rearm); ++ ++int dpaa2_io_from_registration(struct dpaa2_io_notification_ctx *ctx, ++ struct dpaa2_io **io) ++{ ++ struct dpaa2_io_notification_ctx *tmp; ++ struct dpaa2_io *d = ctx->dpio_private; ++ unsigned long irqflags; ++ int ret = 0; ++ ++ BUG_ON(d->magic != MAGIC_OBJECT); ++ /* Iterate the notifications associated with 'd' looking for a match. If ++ * not, we've been passed an unregistered ctx! */ ++ spin_lock_irqsave(&d->object.lock_notifications, irqflags); ++ list_for_each_entry(tmp, &d->object.notifications, node) ++ if (tmp == ctx) ++ goto found; ++ ret = -EINVAL; ++found: ++ spin_unlock_irqrestore(&d->object.lock_notifications, irqflags); ++ if (!ret) { ++ atomic_inc(&d->refs); ++ *io = d; ++ } ++ return ret; ++} ++EXPORT_SYMBOL(dpaa2_io_from_registration); ++ ++int dpaa2_io_service_get_persistent(struct dpaa2_io *service, int cpu, ++ struct dpaa2_io **ret) ++{ ++ if (cpu == -1) ++ *ret = service_select_any(service); ++ else ++ *ret = service_select_by_cpu(service, cpu); ++ if (*ret) { ++ atomic_inc(&(*ret)->refs); ++ return 0; ++ } ++ return -ENODEV; ++} ++EXPORT_SYMBOL(dpaa2_io_service_get_persistent); ++ ++int dpaa2_io_service_pull_fq(struct dpaa2_io *d, uint32_t fqid, ++ struct dpaa2_io_store *s) ++{ ++ struct qbman_pull_desc pd; ++ int err; ++ ++ qbman_pull_desc_clear(&pd); ++ qbman_pull_desc_set_storage(&pd, s->vaddr, s->paddr, 1); ++ qbman_pull_desc_set_numframes(&pd, (uint8_t)s->max); ++ qbman_pull_desc_set_fq(&pd, fqid); ++ d = _service_select(d); ++ if (!d) ++ return -ENODEV; ++ s->swp = d->object.swp; ++ err = qbman_swp_pull(d->object.swp, &pd); ++ if (err) ++ s->swp = NULL; ++ return err; ++} ++EXPORT_SYMBOL(dpaa2_io_service_pull_fq); ++ ++int dpaa2_io_service_pull_channel(struct dpaa2_io *d, uint32_t channelid, ++ struct dpaa2_io_store *s) ++{ ++ struct qbman_pull_desc pd; ++ int err; ++ ++ qbman_pull_desc_clear(&pd); ++ qbman_pull_desc_set_storage(&pd, s->vaddr, s->paddr, 1); ++ qbman_pull_desc_set_numframes(&pd, (uint8_t)s->max); ++ qbman_pull_desc_set_channel(&pd, channelid, qbman_pull_type_prio); ++ d = _service_select(d); ++ if (!d) ++ return -ENODEV; ++ s->swp = d->object.swp; ++ err = qbman_swp_pull(d->object.swp, &pd); ++ if (err) ++ s->swp = NULL; ++ return err; ++} ++EXPORT_SYMBOL(dpaa2_io_service_pull_channel); ++ ++int dpaa2_io_service_enqueue_fq(struct dpaa2_io *d, ++ uint32_t fqid, ++ const struct dpaa2_fd *fd) ++{ ++ struct qbman_eq_desc ed; ++ ++ d = _service_select(d); ++ if (!d) ++ return -ENODEV; ++ qbman_eq_desc_clear(&ed); ++ qbman_eq_desc_set_no_orp(&ed, 0); ++ qbman_eq_desc_set_fq(&ed, fqid); ++ return qbman_swp_enqueue(d->object.swp, &ed, ++ (const struct qbman_fd *)fd); ++} ++EXPORT_SYMBOL(dpaa2_io_service_enqueue_fq); ++ ++int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, ++ uint32_t qdid, uint8_t prio, uint16_t qdbin, ++ const struct dpaa2_fd *fd) ++{ ++ struct qbman_eq_desc ed; ++ ++ d = _service_select(d); ++ if (!d) ++ return -ENODEV; ++ qbman_eq_desc_clear(&ed); ++ qbman_eq_desc_set_no_orp(&ed, 0); ++ qbman_eq_desc_set_qd(&ed, qdid, qdbin, prio); ++ return qbman_swp_enqueue(d->object.swp, &ed, ++ (const struct qbman_fd *)fd); ++} ++EXPORT_SYMBOL(dpaa2_io_service_enqueue_qd); ++ ++int dpaa2_io_service_release(struct dpaa2_io *d, ++ uint32_t bpid, ++ const uint64_t *buffers, ++ unsigned int num_buffers) ++{ ++ struct qbman_release_desc rd; ++ ++ d = _service_select(d); ++ if (!d) ++ return -ENODEV; ++ qbman_release_desc_clear(&rd); ++ qbman_release_desc_set_bpid(&rd, bpid); ++ return qbman_swp_release(d->object.swp, &rd, buffers, num_buffers); ++} ++EXPORT_SYMBOL(dpaa2_io_service_release); ++ ++int dpaa2_io_service_acquire(struct dpaa2_io *d, ++ uint32_t bpid, ++ uint64_t *buffers, ++ unsigned int num_buffers) ++{ ++ unsigned long irqflags; ++ int err; ++ ++ d = _service_select(d); ++ if (!d) ++ return -ENODEV; ++ spin_lock_irqsave(&d->object.lock_mgmt_cmd, irqflags); ++ err = qbman_swp_acquire(d->object.swp, bpid, buffers, num_buffers); ++ spin_unlock_irqrestore(&d->object.lock_mgmt_cmd, irqflags); ++ return err; ++} ++EXPORT_SYMBOL(dpaa2_io_service_acquire); ++ ++struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames, ++ struct device *dev) ++{ ++ struct dpaa2_io_store *ret = kmalloc(sizeof(*ret), GFP_KERNEL); ++ size_t size; ++ ++ BUG_ON(!max_frames || (max_frames > 16)); ++ if (!ret) ++ return NULL; ++ ret->max = max_frames; ++ size = max_frames * sizeof(struct dpaa2_dq) + 64; ++ ret->alloced_addr = kmalloc(size, GFP_KERNEL); ++ if (!ret->alloced_addr) { ++ kfree(ret); ++ return NULL; ++ } ++ ret->vaddr = PTR_ALIGN(ret->alloced_addr, 64); ++ ret->paddr = dma_map_single(dev, ret->vaddr, ++ sizeof(struct dpaa2_dq) * max_frames, ++ DMA_FROM_DEVICE); ++ if (dma_mapping_error(dev, ret->paddr)) { ++ kfree(ret->alloced_addr); ++ kfree(ret); ++ return NULL; ++ } ++ ret->idx = 0; ++ ret->dev = dev; ++ return ret; ++} ++EXPORT_SYMBOL(dpaa2_io_store_create); ++ ++void dpaa2_io_store_destroy(struct dpaa2_io_store *s) ++{ ++ dma_unmap_single(s->dev, s->paddr, sizeof(struct dpaa2_dq) * s->max, ++ DMA_FROM_DEVICE); ++ kfree(s->alloced_addr); ++ kfree(s); ++} ++EXPORT_SYMBOL(dpaa2_io_store_destroy); ++ ++struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last) ++{ ++ int match; ++ struct dpaa2_dq *ret = &s->vaddr[s->idx]; ++ ++ match = qbman_result_has_new_result(s->swp, ret); ++ if (!match) { ++ *is_last = 0; ++ return NULL; ++ } ++ BUG_ON(!qbman_result_is_DQ(ret)); ++ s->idx++; ++ if (dpaa2_dq_is_pull_complete(ret)) { ++ *is_last = 1; ++ s->idx = 0; ++ /* If we get an empty dequeue result to terminate a zero-results ++ * vdqcr, return NULL to the caller rather than expecting him to ++ * check non-NULL results every time. */ ++ if (!(dpaa2_dq_flags(ret) & DPAA2_DQ_STAT_VALIDFRAME)) ++ ret = NULL; ++ } else ++ *is_last = 0; ++ return ret; ++} ++EXPORT_SYMBOL(dpaa2_io_store_next); ++ ++#ifdef CONFIG_FSL_QBMAN_DEBUG ++int dpaa2_io_query_fq_count(struct dpaa2_io *d, uint32_t fqid, ++ uint32_t *fcnt, uint32_t *bcnt) ++{ ++ struct qbman_attr state; ++ struct qbman_swp *swp; ++ unsigned long irqflags; ++ int ret; ++ ++ d = service_select_any(d); ++ if (!d) ++ return -ENODEV; ++ ++ swp = d->object.swp; ++ spin_lock_irqsave(&d->object.lock_mgmt_cmd, irqflags); ++ ret = qbman_fq_query_state(swp, fqid, &state); ++ spin_unlock_irqrestore(&d->object.lock_mgmt_cmd, irqflags); ++ if (ret) ++ return ret; ++ *fcnt = qbman_fq_state_frame_count(&state); ++ *bcnt = qbman_fq_state_byte_count(&state); ++ ++ return 0; ++} ++EXPORT_SYMBOL(dpaa2_io_query_fq_count); ++ ++int dpaa2_io_query_bp_count(struct dpaa2_io *d, uint32_t bpid, ++ uint32_t *num) ++{ ++ struct qbman_attr state; ++ struct qbman_swp *swp; ++ unsigned long irqflags; ++ int ret; ++ ++ d = service_select_any(d); ++ if (!d) ++ return -ENODEV; ++ ++ swp = d->object.swp; ++ spin_lock_irqsave(&d->object.lock_mgmt_cmd, irqflags); ++ ret = qbman_bp_query(swp, bpid, &state); ++ spin_unlock_irqrestore(&d->object.lock_mgmt_cmd, irqflags); ++ if (ret) ++ return ret; ++ *num = qbman_bp_info_num_free_bufs(&state); ++ return 0; ++} ++EXPORT_SYMBOL(dpaa2_io_query_bp_count); ++ ++#endif ++ ++/* module init/exit hooks called from dpio-drv.c. These are declared in ++ * dpio-drv.h. ++ */ ++int dpaa2_io_service_driver_init(void) ++{ ++ service_init(&def_serv, 1); ++ return 0; ++} ++ ++void dpaa2_io_service_driver_exit(void) ++{ ++ if (atomic_read(&def_serv.refs) != 1) ++ pr_err("default DPIO service leaves dangling DPIO objects!\n"); ++} +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/fsl_dpio.h +@@ -0,0 +1,460 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPIO_H ++#define __FSL_DPIO_H ++ ++/* Data Path I/O Portal API ++ * Contains initialization APIs and runtime control APIs for DPIO ++ */ ++ ++struct fsl_mc_io; ++ ++/** ++ * dpio_open() - Open a control session for the specified object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @dpio_id: DPIO unique ID ++ * @token: Returned token; use in subsequent API calls ++ * ++ * This function can be used to open a control session for an ++ * already created object; an object may have been declared in ++ * the DPL or by calling the dpio_create() function. ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent commands for ++ * this specific object. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpio_id, ++ uint16_t *token); ++ ++/** ++ * dpio_close() - Close the control session of the object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * enum dpio_channel_mode - DPIO notification channel mode ++ * @DPIO_NO_CHANNEL: No support for notification channel ++ * @DPIO_LOCAL_CHANNEL: Notifications on data availability can be received by a ++ * dedicated channel in the DPIO; user should point the queue's ++ * destination in the relevant interface to this DPIO ++ */ ++enum dpio_channel_mode { ++ DPIO_NO_CHANNEL = 0, ++ DPIO_LOCAL_CHANNEL = 1, ++}; ++ ++/** ++ * struct dpio_cfg - Structure representing DPIO configuration ++ * @channel_mode: Notification channel mode ++ * @num_priorities: Number of priorities for the notification channel (1-8); ++ * relevant only if 'channel_mode = DPIO_LOCAL_CHANNEL' ++ */ ++struct dpio_cfg { ++ enum dpio_channel_mode channel_mode; ++ uint8_t num_priorities; ++}; ++ ++/** ++ * dpio_create() - Create the DPIO object. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @cfg: Configuration structure ++ * @token: Returned token; use in subsequent API calls ++ * ++ * Create the DPIO object, allocate required resources and ++ * perform required initialization. ++ * ++ * The object can be created either by declaring it in the ++ * DPL file, or by calling this function. ++ * ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent calls to ++ * this specific object. For objects that are created using the ++ * DPL file, call dpio_open() function to get an authentication ++ * token first. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpio_cfg *cfg, ++ uint16_t *token); ++ ++/** ++ * dpio_destroy() - Destroy the DPIO object and release all its resources. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * ++ * Return: '0' on Success; Error code otherwise ++ */ ++int dpio_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpio_enable() - Enable the DPIO, allow I/O portal operations. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * ++ * Return: '0' on Success; Error code otherwise ++ */ ++int dpio_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpio_disable() - Disable the DPIO, stop any I/O portal operation. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * ++ * Return: '0' on Success; Error code otherwise ++ */ ++int dpio_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpio_is_enabled() - Check if the DPIO is enabled. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @en: Returns '1' if object is enabled; '0' otherwise ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en); ++ ++/** ++ * dpio_reset() - Reset the DPIO, returns the object to initial state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpio_set_stashing_destination() - Set the stashing destination. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @sdest: stashing destination value ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_set_stashing_destination(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t sdest); ++ ++/** ++ * dpio_get_stashing_destination() - Get the stashing destination.. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @sdest: Returns the stashing destination value ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_get_stashing_destination(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t *sdest); ++ ++/** ++ * dpio_add_static_dequeue_channel() - Add a static dequeue channel. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @dpcon_id: DPCON object ID ++ * @channel_index: Returned channel index to be used in qbman API ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_add_static_dequeue_channel(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int dpcon_id, ++ uint8_t *channel_index); ++ ++/** ++ * dpio_remove_static_dequeue_channel() - Remove a static dequeue channel. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @dpcon_id: DPCON object ID ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_remove_static_dequeue_channel(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int dpcon_id); ++ ++/** ++ * DPIO IRQ Index and Events ++ */ ++ ++/** ++ * Irq software-portal index ++ */ ++#define DPIO_IRQ_SWP_INDEX 0 ++ ++/** ++ * struct dpio_irq_cfg - IRQ configuration ++ * @addr: Address that must be written to signal a message-based interrupt ++ * @val: Value to write into irq_addr address ++ * @irq_num: A user defined number associated with this IRQ ++ */ ++struct dpio_irq_cfg { ++ uint64_t addr; ++ uint32_t val; ++ int irq_num; ++}; ++ ++/** ++ * dpio_set_irq() - Set IRQ information for the DPIO to trigger an interrupt. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @irq_index: Identifies the interrupt index to configure ++ * @irq_cfg: IRQ configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpio_irq_cfg *irq_cfg); ++ ++/** ++ * dpio_get_irq() - Get IRQ information from the DPIO. ++ * ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @irq_index: The interrupt index to configure ++ * @type: Interrupt type: 0 represents message interrupt ++ * type (both irq_addr and irq_val are valid) ++ * @irq_cfg: IRQ attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpio_irq_cfg *irq_cfg); ++ ++/** ++ * dpio_set_irq_enable() - Set overall interrupt state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @irq_index: The interrupt index to configure ++ * @en: Interrupt state - enable = 1, disable = 0 ++ * ++ * Allows GPP software to control when interrupts are generated. ++ * Each interrupt can have up to 32 causes. The enable/disable control's the ++ * overall interrupt state. if the interrupt is disabled no causes will cause ++ * an interrupt. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en); ++ ++/** ++ * dpio_get_irq_enable() - Get overall interrupt state ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @irq_index: The interrupt index to configure ++ * @en: Returned interrupt state - enable = 1, disable = 0 ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en); ++ ++/** ++ * dpio_set_irq_mask() - Set interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @irq_index: The interrupt index to configure ++ * @mask: event mask to trigger interrupt; ++ * each bit: ++ * 0 = ignore event ++ * 1 = consider event for asserting IRQ ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask); ++ ++/** ++ * dpio_get_irq_mask() - Get interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @irq_index: The interrupt index to configure ++ * @mask: Returned event mask to trigger interrupt ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask); ++ ++/** ++ * dpio_get_irq_status() - Get the current status of any pending interrupts. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @irq_index: The interrupt index to configure ++ * @status: Returned interrupts status - one bit per cause: ++ * 0 = no interrupt pending ++ * 1 = interrupt pending ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status); ++ ++/** ++ * dpio_clear_irq_status() - Clear a pending interrupt's status ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @irq_index: The interrupt index to configure ++ * @status: bits to clear (W1C) - one bit per cause: ++ * 0 = don't change ++ * 1 = clear status bit ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpio_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status); ++ ++/** ++ * struct dpio_attr - Structure representing DPIO attributes ++ * @id: DPIO object ID ++ * @version: DPIO version ++ * @qbman_portal_ce_offset: offset of the software portal cache-enabled area ++ * @qbman_portal_ci_offset: offset of the software portal cache-inhibited area ++ * @qbman_portal_id: Software portal ID ++ * @channel_mode: Notification channel mode ++ * @num_priorities: Number of priorities for the notification channel (1-8); ++ * relevant only if 'channel_mode = DPIO_LOCAL_CHANNEL' ++ * @qbman_version: QBMAN version ++ */ ++struct dpio_attr { ++ int id; ++ /** ++ * struct version - DPIO version ++ * @major: DPIO major version ++ * @minor: DPIO minor version ++ */ ++ struct { ++ uint16_t major; ++ uint16_t minor; ++ } version; ++ uint64_t qbman_portal_ce_offset; ++ uint64_t qbman_portal_ci_offset; ++ uint16_t qbman_portal_id; ++ enum dpio_channel_mode channel_mode; ++ uint8_t num_priorities; ++ uint32_t qbman_version; ++}; ++ ++/** ++ * dpio_get_attributes() - Retrieve DPIO attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPIO object ++ * @attr: Returned object's attributes ++ * ++ * Return: '0' on Success; Error code otherwise ++ */ ++int dpio_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpio_attr *attr); ++#endif /* __FSL_DPIO_H */ +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/fsl_dpio_cmd.h +@@ -0,0 +1,184 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef _FSL_DPIO_CMD_H ++#define _FSL_DPIO_CMD_H ++ ++/* DPIO Version */ ++#define DPIO_VER_MAJOR 3 ++#define DPIO_VER_MINOR 2 ++ ++/* Command IDs */ ++#define DPIO_CMDID_CLOSE 0x800 ++#define DPIO_CMDID_OPEN 0x803 ++#define DPIO_CMDID_CREATE 0x903 ++#define DPIO_CMDID_DESTROY 0x900 ++ ++#define DPIO_CMDID_ENABLE 0x002 ++#define DPIO_CMDID_DISABLE 0x003 ++#define DPIO_CMDID_GET_ATTR 0x004 ++#define DPIO_CMDID_RESET 0x005 ++#define DPIO_CMDID_IS_ENABLED 0x006 ++ ++#define DPIO_CMDID_SET_IRQ 0x010 ++#define DPIO_CMDID_GET_IRQ 0x011 ++#define DPIO_CMDID_SET_IRQ_ENABLE 0x012 ++#define DPIO_CMDID_GET_IRQ_ENABLE 0x013 ++#define DPIO_CMDID_SET_IRQ_MASK 0x014 ++#define DPIO_CMDID_GET_IRQ_MASK 0x015 ++#define DPIO_CMDID_GET_IRQ_STATUS 0x016 ++#define DPIO_CMDID_CLEAR_IRQ_STATUS 0x017 ++ ++#define DPIO_CMDID_SET_STASHING_DEST 0x120 ++#define DPIO_CMDID_GET_STASHING_DEST 0x121 ++#define DPIO_CMDID_ADD_STATIC_DEQUEUE_CHANNEL 0x122 ++#define DPIO_CMDID_REMOVE_STATIC_DEQUEUE_CHANNEL 0x123 ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_OPEN(cmd, dpio_id) \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, dpio_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_CREATE(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 16, 2, enum dpio_channel_mode, \ ++ cfg->channel_mode);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->num_priorities);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_RSP_IS_ENABLED(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_SET_IRQ(cmd, irq_index, irq_cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, irq_index);\ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, irq_cfg->val);\ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\ ++ MC_CMD_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_GET_IRQ(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_RSP_GET_IRQ(cmd, type, irq_cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val); \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr); \ ++ MC_RSP_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, type); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_SET_IRQ_ENABLE(cmd, irq_index, en) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, en); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_GET_IRQ_ENABLE(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_RSP_GET_IRQ_ENABLE(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_SET_IRQ_MASK(cmd, irq_index, mask) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, mask); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_GET_IRQ_MASK(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_RSP_GET_IRQ_MASK(cmd, mask) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mask) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_GET_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_RSP_GET_IRQ_STATUS(cmd, status) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, status) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_RSP_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, int, attr->id);\ ++ MC_RSP_OP(cmd, 0, 32, 16, uint16_t, attr->qbman_portal_id);\ ++ MC_RSP_OP(cmd, 0, 48, 8, uint8_t, attr->num_priorities);\ ++ MC_RSP_OP(cmd, 0, 56, 4, enum dpio_channel_mode, attr->channel_mode);\ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->qbman_portal_ce_offset);\ ++ MC_RSP_OP(cmd, 2, 0, 64, uint64_t, attr->qbman_portal_ci_offset);\ ++ MC_RSP_OP(cmd, 3, 0, 16, uint16_t, attr->version.major);\ ++ MC_RSP_OP(cmd, 3, 16, 16, uint16_t, attr->version.minor);\ ++ MC_RSP_OP(cmd, 3, 32, 32, uint32_t, attr->qbman_version);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_SET_STASHING_DEST(cmd, sdest) \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, sdest) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_RSP_GET_STASHING_DEST(cmd, sdest) \ ++ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, sdest) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_ADD_STATIC_DEQUEUE_CHANNEL(cmd, dpcon_id) \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, dpcon_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_RSP_ADD_STATIC_DEQUEUE_CHANNEL(cmd, channel_index) \ ++ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, channel_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPIO_CMD_REMOVE_STATIC_DEQUEUE_CHANNEL(cmd, dpcon_id) \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, dpcon_id) ++#endif /* _FSL_DPIO_CMD_H */ +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/fsl_qbman_base.h +@@ -0,0 +1,123 @@ ++/* Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef _FSL_QBMAN_BASE_H ++#define _FSL_QBMAN_BASE_H ++ ++/** ++ * struct qbman_block_desc - qbman block descriptor structure ++ * ++ * Descriptor for a QBMan instance on the SoC. On partitions/targets that do not ++ * control this QBMan instance, these values may simply be place-holders. The ++ * idea is simply that we be able to distinguish between them, eg. so that SWP ++ * descriptors can identify which QBMan instance they belong to. ++ */ ++struct qbman_block_desc { ++ void *ccsr_reg_bar; /* CCSR register map */ ++ int irq_rerr; /* Recoverable error interrupt line */ ++ int irq_nrerr; /* Non-recoverable error interrupt line */ ++}; ++ ++/** ++ * struct qbman_swp_desc - qbman software portal descriptor structure ++ * ++ * Descriptor for a QBMan software portal, expressed in terms that make sense to ++ * the user context. Ie. on MC, this information is likely to be true-physical, ++ * and instantiated statically at compile-time. On GPP, this information is ++ * likely to be obtained via "discovery" over a partition's "layerscape bus" ++ * (ie. in response to a MC portal command), and would take into account any ++ * virtualisation of the GPP user's address space and/or interrupt numbering. ++ */ ++struct qbman_swp_desc { ++ const struct qbman_block_desc *block; /* The QBMan instance */ ++ void *cena_bar; /* Cache-enabled portal register map */ ++ void *cinh_bar; /* Cache-inhibited portal register map */ ++ uint32_t qman_version; ++}; ++ ++/* Driver object for managing a QBMan portal */ ++struct qbman_swp; ++ ++/** ++ * struct qbman_fd - basci structure for qbman frame descriptor ++ * ++ * Place-holder for FDs, we represent it via the simplest form that we need for ++ * now. Different overlays may be needed to support different options, etc. (It ++ * is impractical to define One True Struct, because the resulting encoding ++ * routines (lots of read-modify-writes) would be worst-case performance whether ++ * or not circumstances required them.) ++ * ++ * Note, as with all data-structures exchanged between software and hardware (be ++ * they located in the portal register map or DMA'd to and from main-memory), ++ * the driver ensures that the caller of the driver API sees the data-structures ++ * in host-endianness. "struct qbman_fd" is no exception. The 32-bit words ++ * contained within this structure are represented in host-endianness, even if ++ * hardware always treats them as little-endian. As such, if any of these fields ++ * are interpreted in a binary (rather than numerical) fashion by hardware ++ * blocks (eg. accelerators), then the user should be careful. We illustrate ++ * with an example; ++ * ++ * Suppose the desired behaviour of an accelerator is controlled by the "frc" ++ * field of the FDs that are sent to it. Suppose also that the behaviour desired ++ * by the user corresponds to an "frc" value which is expressed as the literal ++ * sequence of bytes 0xfe, 0xed, 0xab, and 0xba. So "frc" should be the 32-bit ++ * value in which 0xfe is the first byte and 0xba is the last byte, and as ++ * hardware is little-endian, this amounts to a 32-bit "value" of 0xbaabedfe. If ++ * the software is little-endian also, this can simply be achieved by setting ++ * frc=0xbaabedfe. On the other hand, if software is big-endian, it should set ++ * frc=0xfeedabba! The best away of avoiding trouble with this sort of thing is ++ * to treat the 32-bit words as numerical values, in which the offset of a field ++ * from the beginning of the first byte (as required or generated by hardware) ++ * is numerically encoded by a left-shift (ie. by raising the field to a ++ * corresponding power of 2). Ie. in the current example, software could set ++ * "frc" in the following way, and it would work correctly on both little-endian ++ * and big-endian operation; ++ * fd.frc = (0xfe << 0) | (0xed << 8) | (0xab << 16) | (0xba << 24); ++ */ ++struct qbman_fd { ++ union { ++ uint32_t words[8]; ++ struct qbman_fd_simple { ++ uint32_t addr_lo; ++ uint32_t addr_hi; ++ uint32_t len; ++ /* offset in the MS 16 bits, BPID in the LS 16 bits */ ++ uint32_t bpid_offset; ++ uint32_t frc; /* frame context */ ++ /* "err", "va", "cbmt", "asal", [...] */ ++ uint32_t ctrl; ++ /* flow context */ ++ uint32_t flc_lo; ++ uint32_t flc_hi; ++ } simple; ++ }; ++}; ++ ++#endif /* !_FSL_QBMAN_BASE_H */ +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/fsl_qbman_portal.h +@@ -0,0 +1,753 @@ ++/* Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef _FSL_QBMAN_PORTAL_H ++#define _FSL_QBMAN_PORTAL_H ++ ++#include "fsl_qbman_base.h" ++ ++/** ++ * qbman_swp_init() - Create a functional object representing the given ++ * QBMan portal descriptor. ++ * @d: the given qbman swp descriptor ++ * ++ * Return qbman_swp portal object for success, NULL if the object cannot ++ * be created. ++ */ ++struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d); ++/** ++ * qbman_swp_finish() - Create and destroy a functional object representing ++ * the given QBMan portal descriptor. ++ * @p: the qbman_swp object to be destroyed. ++ * ++ */ ++void qbman_swp_finish(struct qbman_swp *p); ++ ++/** ++ * qbman_swp_get_desc() - Get the descriptor of the given portal object. ++ * @p: the given portal object. ++ * ++ * Return the descriptor for this portal. ++ */ ++const struct qbman_swp_desc *qbman_swp_get_desc(struct qbman_swp *p); ++ ++ /**************/ ++ /* Interrupts */ ++ /**************/ ++ ++/* See the QBMan driver API documentation for details on the interrupt ++ * mechanisms. */ ++#define QBMAN_SWP_INTERRUPT_EQRI ((uint32_t)0x00000001) ++#define QBMAN_SWP_INTERRUPT_EQDI ((uint32_t)0x00000002) ++#define QBMAN_SWP_INTERRUPT_DQRI ((uint32_t)0x00000004) ++#define QBMAN_SWP_INTERRUPT_RCRI ((uint32_t)0x00000008) ++#define QBMAN_SWP_INTERRUPT_RCDI ((uint32_t)0x00000010) ++#define QBMAN_SWP_INTERRUPT_VDCI ((uint32_t)0x00000020) ++ ++/** ++ * qbman_swp_interrupt_get_vanish() ++ * qbman_swp_interrupt_set_vanish() - Get/Set the data in software portal ++ * interrupt status disable register. ++ * @p: the given software portal object. ++ * @mask: The mask to set in SWP_IDSR register. ++ * ++ * Return the settings in SWP_ISDR register for Get function. ++ */ ++uint32_t qbman_swp_interrupt_get_vanish(struct qbman_swp *p); ++void qbman_swp_interrupt_set_vanish(struct qbman_swp *p, uint32_t mask); ++ ++/** ++ * qbman_swp_interrupt_read_status() ++ * qbman_swp_interrupt_clear_status() - Get/Set the data in software portal ++ * interrupt status register. ++ * @p: the given software portal object. ++ * @mask: The mask to set in SWP_ISR register. ++ * ++ * Return the settings in SWP_ISR register for Get function. ++ * ++ */ ++uint32_t qbman_swp_interrupt_read_status(struct qbman_swp *p); ++void qbman_swp_interrupt_clear_status(struct qbman_swp *p, uint32_t mask); ++ ++/** ++ * qbman_swp_interrupt_get_trigger() ++ * qbman_swp_interrupt_set_trigger() - Get/Set the data in software portal ++ * interrupt enable register. ++ * @p: the given software portal object. ++ * @mask: The mask to set in SWP_IER register. ++ * ++ * Return the settings in SWP_IER register for Get function. ++ */ ++uint32_t qbman_swp_interrupt_get_trigger(struct qbman_swp *p); ++void qbman_swp_interrupt_set_trigger(struct qbman_swp *p, uint32_t mask); ++ ++/** ++ * qbman_swp_interrupt_get_inhibit() ++ * qbman_swp_interrupt_set_inhibit() - Set/Set the data in software portal ++ * interrupt inhibit register. ++ * @p: the given software portal object. ++ * @mask: The mask to set in SWP_IIR register. ++ * ++ * Return the settings in SWP_IIR register for Get function. ++ */ ++int qbman_swp_interrupt_get_inhibit(struct qbman_swp *p); ++void qbman_swp_interrupt_set_inhibit(struct qbman_swp *p, int inhibit); ++ ++ /************/ ++ /* Dequeues */ ++ /************/ ++ ++/* See the QBMan driver API documentation for details on the enqueue ++ * mechanisms. NB: the use of a 'dpaa2_' prefix for this type is because it is ++ * primarily used by the "DPIO" layer that sits above (and hides) the QBMan ++ * driver. The structure is defined in the DPIO interface, but to avoid circular ++ * dependencies we just pre/re-declare it here opaquely. */ ++struct dpaa2_dq; ++ ++/* ------------------- */ ++/* Push-mode dequeuing */ ++/* ------------------- */ ++ ++/** ++ * qbman_swp_push_get() - Get the push dequeue setup. ++ * @p: the software portal object. ++ * @channel_idx: the channel index to query. ++ * @enabled: returned boolean to show whether the push dequeue is enabled for ++ * the given channel. ++ */ ++void qbman_swp_push_get(struct qbman_swp *, uint8_t channel_idx, int *enabled); ++/** ++ * qbman_swp_push_set() - Enable or disable push dequeue. ++ * @p: the software portal object. ++ * @channel_idx: the channel index.. ++ * @enable: enable or disable push dequeue. ++ * ++ * The user of a portal can enable and disable push-mode dequeuing of up to 16 ++ * channels independently. It does not specify this toggling by channel IDs, but ++ * rather by specifying the index (from 0 to 15) that has been mapped to the ++ * desired channel. ++ */ ++void qbman_swp_push_set(struct qbman_swp *, uint8_t channel_idx, int enable); ++ ++/* ------------------- */ ++/* Pull-mode dequeuing */ ++/* ------------------- */ ++ ++/** ++ * struct qbman_pull_desc - the structure for pull dequeue descriptor ++ */ ++struct qbman_pull_desc { ++ uint32_t dont_manipulate_directly[6]; ++}; ++ ++enum qbman_pull_type_e { ++ /* dequeue with priority precedence, respect intra-class scheduling */ ++ qbman_pull_type_prio = 1, ++ /* dequeue with active FQ precedence, respect ICS */ ++ qbman_pull_type_active, ++ /* dequeue with active FQ precedence, no ICS */ ++ qbman_pull_type_active_noics ++}; ++ ++/** ++ * qbman_pull_desc_clear() - Clear the contents of a descriptor to ++ * default/starting state. ++ * @d: the pull dequeue descriptor to be cleared. ++ */ ++void qbman_pull_desc_clear(struct qbman_pull_desc *d); ++ ++/** ++ * qbman_pull_desc_set_storage()- Set the pull dequeue storage ++ * @d: the pull dequeue descriptor to be set. ++ * @storage: the pointer of the memory to store the dequeue result. ++ * @storage_phys: the physical address of the storage memory. ++ * @stash: to indicate whether write allocate is enabled. ++ * ++ * If not called, or if called with 'storage' as NULL, the result pull dequeues ++ * will produce results to DQRR. If 'storage' is non-NULL, then results are ++ * produced to the given memory location (using the physical/DMA address which ++ * the caller provides in 'storage_phys'), and 'stash' controls whether or not ++ * those writes to main-memory express a cache-warming attribute. ++ */ ++void qbman_pull_desc_set_storage(struct qbman_pull_desc *d, ++ struct dpaa2_dq *storage, ++ dma_addr_t storage_phys, ++ int stash); ++/** ++ * qbman_pull_desc_set_numframes() - Set the number of frames to be dequeued. ++ * @d: the pull dequeue descriptor to be set. ++ * @numframes: number of frames to be set, must be between 1 and 16, inclusive. ++ */ ++void qbman_pull_desc_set_numframes(struct qbman_pull_desc *, uint8_t numframes); ++ ++/** ++ * qbman_pull_desc_set_fq() - Set fqid from which the dequeue command dequeues. ++ * @fqid: the frame queue index of the given FQ. ++ * ++ * qbman_pull_desc_set_wq() - Set wqid from which the dequeue command dequeues. ++ * @wqid: composed of channel id and wqid within the channel. ++ * @dct: the dequeue command type. ++ * ++ * qbman_pull_desc_set_channel() - Set channelid from which the dequeue command ++ * dequeues. ++ * @chid: the channel id to be dequeued. ++ * @dct: the dequeue command type. ++ * ++ * Exactly one of the following descriptor "actions" should be set. (Calling any ++ * one of these will replace the effect of any prior call to one of these.) ++ * - pull dequeue from the given frame queue (FQ) ++ * - pull dequeue from any FQ in the given work queue (WQ) ++ * - pull dequeue from any FQ in any WQ in the given channel ++ */ ++void qbman_pull_desc_set_fq(struct qbman_pull_desc *, uint32_t fqid); ++void qbman_pull_desc_set_wq(struct qbman_pull_desc *, uint32_t wqid, ++ enum qbman_pull_type_e dct); ++void qbman_pull_desc_set_channel(struct qbman_pull_desc *, uint32_t chid, ++ enum qbman_pull_type_e dct); ++ ++/** ++ * qbman_swp_pull() - Issue the pull dequeue command ++ * @s: the software portal object. ++ * @d: the software portal descriptor which has been configured with ++ * the set of qbman_pull_desc_set_*() calls. ++ * ++ * Return 0 for success, and -EBUSY if the software portal is not ready ++ * to do pull dequeue. ++ */ ++int qbman_swp_pull(struct qbman_swp *, struct qbman_pull_desc *d); ++ ++/* -------------------------------- */ ++/* Polling DQRR for dequeue results */ ++/* -------------------------------- */ ++ ++/** ++ * qbman_swp_dqrr_next() - Get an valid DQRR entry. ++ * @s: the software portal object. ++ * ++ * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry ++ * only once, so repeated calls can return a sequence of DQRR entries, without ++ * requiring they be consumed immediately or in any particular order. ++ */ ++const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s); ++ ++/** ++ * qbman_swp_dqrr_consume() - Consume DQRR entries previously returned from ++ * qbman_swp_dqrr_next(). ++ * @s: the software portal object. ++ * @dq: the DQRR entry to be consumed. ++ */ ++void qbman_swp_dqrr_consume(struct qbman_swp *s, const struct dpaa2_dq *dq); ++ ++/* ------------------------------------------------- */ ++/* Polling user-provided storage for dequeue results */ ++/* ------------------------------------------------- */ ++/** ++ * qbman_result_has_new_result() - Check and get the dequeue response from the ++ * dq storage memory set in pull dequeue command ++ * @s: the software portal object. ++ * @dq: the dequeue result read from the memory. ++ * ++ * Only used for user-provided storage of dequeue results, not DQRR. For ++ * efficiency purposes, the driver will perform any required endianness ++ * conversion to ensure that the user's dequeue result storage is in host-endian ++ * format (whether or not that is the same as the little-endian format that ++ * hardware DMA'd to the user's storage). As such, once the user has called ++ * qbman_result_has_new_result() and been returned a valid dequeue result, ++ * they should not call it again on the same memory location (except of course ++ * if another dequeue command has been executed to produce a new result to that ++ * location). ++ * ++ * Return 1 for getting a valid dequeue result, or 0 for not getting a valid ++ * dequeue result. ++ */ ++int qbman_result_has_new_result(struct qbman_swp *, ++ const struct dpaa2_dq *); ++ ++/* -------------------------------------------------------- */ ++/* Parsing dequeue entries (DQRR and user-provided storage) */ ++/* -------------------------------------------------------- */ ++ ++/** ++ * qbman_result_is_DQ() - check the dequeue result is a dequeue response or not ++ * @dq: the dequeue result to be checked. ++ * ++ * DQRR entries may contain non-dequeue results, ie. notifications ++ */ ++int qbman_result_is_DQ(const struct dpaa2_dq *); ++ ++/** ++ * qbman_result_is_SCN() - Check the dequeue result is notification or not ++ * @dq: the dequeue result to be checked. ++ * ++ * All the non-dequeue results (FQDAN/CDAN/CSCN/...) are "state change ++ * notifications" of one type or another. Some APIs apply to all of them, of the ++ * form qbman_result_SCN_***(). ++ */ ++static inline int qbman_result_is_SCN(const struct dpaa2_dq *dq) ++{ ++ return !qbman_result_is_DQ(dq); ++} ++ ++/** ++ * Recognise different notification types, only required if the user allows for ++ * these to occur, and cares about them when they do. ++ */ ++int qbman_result_is_FQDAN(const struct dpaa2_dq *); ++ /* FQ Data Availability */ ++int qbman_result_is_CDAN(const struct dpaa2_dq *); ++ /* Channel Data Availability */ ++int qbman_result_is_CSCN(const struct dpaa2_dq *); ++ /* Congestion State Change */ ++int qbman_result_is_BPSCN(const struct dpaa2_dq *); ++ /* Buffer Pool State Change */ ++int qbman_result_is_CGCU(const struct dpaa2_dq *); ++ /* Congestion Group Count Update */ ++/* Frame queue state change notifications; (FQDAN in theory counts too as it ++ * leaves a FQ parked, but it is primarily a data availability notification) */ ++int qbman_result_is_FQRN(const struct dpaa2_dq *); /* Retirement */ ++int qbman_result_is_FQRNI(const struct dpaa2_dq *); ++ /* Retirement Immediate */ ++int qbman_result_is_FQPN(const struct dpaa2_dq *); /* Park */ ++ ++/* NB: for parsing dequeue results (when "is_DQ" is TRUE), use the higher-layer ++ * dpaa2_dq_*() functions. */ ++ ++/* State-change notifications (FQDAN/CDAN/CSCN/...). */ ++/** ++ * qbman_result_SCN_state() - Get the state field in State-change notification ++ */ ++uint8_t qbman_result_SCN_state(const struct dpaa2_dq *); ++/** ++ * qbman_result_SCN_rid() - Get the resource id in State-change notification ++ */ ++uint32_t qbman_result_SCN_rid(const struct dpaa2_dq *); ++/** ++ * qbman_result_SCN_ctx() - Get the context data in State-change notification ++ */ ++uint64_t qbman_result_SCN_ctx(const struct dpaa2_dq *); ++/** ++ * qbman_result_SCN_state_in_mem() - Get the state field in State-change ++ * notification which is written to memory instead of DQRR. ++ */ ++uint8_t qbman_result_SCN_state_in_mem(const struct dpaa2_dq *); ++/** ++ * qbman_result_SCN_rid_in_mem() - Get the resource id in State-change ++ * notification which is written to memory instead of DQRR. ++ */ ++uint32_t qbman_result_SCN_rid_in_mem(const struct dpaa2_dq *); ++ ++/* Type-specific "resource IDs". Mainly for illustration purposes, though it ++ * also gives the appropriate type widths. */ ++#define qbman_result_FQDAN_fqid(dq) qbman_result_SCN_rid(dq) ++#define qbman_result_FQRN_fqid(dq) qbman_result_SCN_rid(dq) ++#define qbman_result_FQRNI_fqid(dq) qbman_result_SCN_rid(dq) ++#define qbman_result_FQPN_fqid(dq) qbman_result_SCN_rid(dq) ++#define qbman_result_CDAN_cid(dq) ((uint16_t)qbman_result_SCN_rid(dq)) ++#define qbman_result_CSCN_cgid(dq) ((uint16_t)qbman_result_SCN_rid(dq)) ++ ++/** ++ * qbman_result_bpscn_bpid() - Get the bpid from BPSCN ++ * ++ * Return the buffer pool id. ++ */ ++uint16_t qbman_result_bpscn_bpid(const struct dpaa2_dq *); ++/** ++ * qbman_result_bpscn_has_free_bufs() - Check whether there are free ++ * buffers in the pool from BPSCN. ++ * ++ * Return the number of free buffers. ++ */ ++int qbman_result_bpscn_has_free_bufs(const struct dpaa2_dq *); ++/** ++ * qbman_result_bpscn_is_depleted() - Check BPSCN to see whether the ++ * buffer pool is depleted. ++ * ++ * Return the status of buffer pool depletion. ++ */ ++int qbman_result_bpscn_is_depleted(const struct dpaa2_dq *); ++/** ++ * qbman_result_bpscn_is_surplus() - Check BPSCN to see whether the buffer ++ * pool is surplus or not. ++ * ++ * Return the status of buffer pool surplus. ++ */ ++int qbman_result_bpscn_is_surplus(const struct dpaa2_dq *); ++/** ++ * qbman_result_bpscn_ctx() - Get the BPSCN CTX from BPSCN message ++ * ++ * Return the BPSCN context. ++ */ ++uint64_t qbman_result_bpscn_ctx(const struct dpaa2_dq *); ++ ++/* Parsing CGCU */ ++/** ++ * qbman_result_cgcu_cgid() - Check CGCU resouce id, i.e. cgid ++ * ++ * Return the CGCU resource id. ++ */ ++uint16_t qbman_result_cgcu_cgid(const struct dpaa2_dq *); ++/** ++ * qbman_result_cgcu_icnt() - Get the I_CNT from CGCU ++ * ++ * Return instantaneous count in the CGCU notification. ++ */ ++uint64_t qbman_result_cgcu_icnt(const struct dpaa2_dq *); ++ ++ /************/ ++ /* Enqueues */ ++ /************/ ++/** ++ * struct qbman_eq_desc - structure of enqueue descriptor ++ */ ++struct qbman_eq_desc { ++ uint32_t dont_manipulate_directly[8]; ++}; ++ ++/** ++ * struct qbman_eq_response - structure of enqueue response ++ */ ++struct qbman_eq_response { ++ uint32_t dont_manipulate_directly[16]; ++}; ++ ++/** ++ * qbman_eq_desc_clear() - Clear the contents of a descriptor to ++ * default/starting state. ++ */ ++void qbman_eq_desc_clear(struct qbman_eq_desc *); ++ ++/* Exactly one of the following descriptor "actions" should be set. (Calling ++ * any one of these will replace the effect of any prior call to one of these.) ++ * - enqueue without order-restoration ++ * - enqueue with order-restoration ++ * - fill a hole in the order-restoration sequence, without any enqueue ++ * - advance NESN (Next Expected Sequence Number), without any enqueue ++ * 'respond_success' indicates whether an enqueue response should be DMA'd ++ * after success (otherwise a response is DMA'd only after failure). ++ * 'incomplete' indicates that other fragments of the same 'seqnum' are yet to ++ * be enqueued. ++ */ ++/** ++ * qbman_eq_desc_set_no_orp() - Set enqueue descriptor without orp ++ * @d: the enqueue descriptor. ++ * @response_success: 1 = enqueue with response always; 0 = enqueue with ++ * rejections returned on a FQ. ++ */ ++void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success); ++ ++/** ++ * qbman_eq_desc_set_orp() - Set order-resotration in the enqueue descriptor ++ * @d: the enqueue descriptor. ++ * @response_success: 1 = enqueue with response always; 0 = enqueue with ++ * rejections returned on a FQ. ++ * @opr_id: the order point record id. ++ * @seqnum: the order restoration sequence number. ++ * @incomplete: indiates whether this is the last fragments using the same ++ * sequeue number. ++ */ ++void qbman_eq_desc_set_orp(struct qbman_eq_desc *d, int respond_success, ++ uint32_t opr_id, uint32_t seqnum, int incomplete); ++ ++/** ++ * qbman_eq_desc_set_orp_hole() - fill a hole in the order-restoration sequence ++ * without any enqueue ++ * @d: the enqueue descriptor. ++ * @opr_id: the order point record id. ++ * @seqnum: the order restoration sequence number. ++ */ ++void qbman_eq_desc_set_orp_hole(struct qbman_eq_desc *d, uint32_t opr_id, ++ uint32_t seqnum); ++ ++/** ++ * qbman_eq_desc_set_orp_nesn() - advance NESN (Next Expected Sequence Number) ++ * without any enqueue ++ * @d: the enqueue descriptor. ++ * @opr_id: the order point record id. ++ * @seqnum: the order restoration sequence number. ++ */ ++void qbman_eq_desc_set_orp_nesn(struct qbman_eq_desc *d, uint32_t opr_id, ++ uint32_t seqnum); ++ ++/** ++ * qbman_eq_desc_set_response() - Set the enqueue response info. ++ * @d: the enqueue descriptor ++ * @storage_phys: the physical address of the enqueue response in memory. ++ * @stash: indicate that the write allocation enabled or not. ++ * ++ * In the case where an enqueue response is DMA'd, this determines where that ++ * response should go. (The physical/DMA address is given for hardware's ++ * benefit, but software should interpret it as a "struct qbman_eq_response" ++ * data structure.) 'stash' controls whether or not the write to main-memory ++ * expresses a cache-warming attribute. ++ */ ++void qbman_eq_desc_set_response(struct qbman_eq_desc *d, ++ dma_addr_t storage_phys, ++ int stash); ++/** ++ * qbman_eq_desc_set_token() - Set token for the enqueue command ++ * @d: the enqueue descriptor ++ * @token: the token to be set. ++ * ++ * token is the value that shows up in an enqueue response that can be used to ++ * detect when the results have been published. The easiest technique is to zero ++ * result "storage" before issuing an enqueue, and use any non-zero 'token' ++ * value. ++ */ ++void qbman_eq_desc_set_token(struct qbman_eq_desc *d, uint8_t token); ++ ++/** ++ * qbman_eq_desc_set_fq() ++ * qbman_eq_desc_set_qd() - Set eithe FQ or Queuing Destination for the enqueue ++ * command. ++ * @d: the enqueue descriptor ++ * @fqid: the id of the frame queue to be enqueued. ++ * @qdid: the id of the queuing destination to be enqueued. ++ * @qd_bin: the queuing destination bin ++ * @qd_prio: the queuing destination priority. ++ * ++ * Exactly one of the following descriptor "targets" should be set. (Calling any ++ * one of these will replace the effect of any prior call to one of these.) ++ * - enqueue to a frame queue ++ * - enqueue to a queuing destination ++ * Note, that none of these will have any affect if the "action" type has been ++ * set to "orp_hole" or "orp_nesn". ++ */ ++void qbman_eq_desc_set_fq(struct qbman_eq_desc *, uint32_t fqid); ++void qbman_eq_desc_set_qd(struct qbman_eq_desc *, uint32_t qdid, ++ uint32_t qd_bin, uint32_t qd_prio); ++ ++/** ++ * qbman_eq_desc_set_eqdi() - enable/disable EQDI interrupt ++ * @d: the enqueue descriptor ++ * @enable: boolean to enable/disable EQDI ++ * ++ * Determines whether or not the portal's EQDI interrupt source should be ++ * asserted after the enqueue command is completed. ++ */ ++void qbman_eq_desc_set_eqdi(struct qbman_eq_desc *, int enable); ++ ++/** ++ * qbman_eq_desc_set_dca() - Set DCA mode in the enqueue command. ++ * @d: the enqueue descriptor. ++ * @enable: enabled/disable DCA mode. ++ * @dqrr_idx: DCAP_CI, the DCAP consumer index. ++ * @park: determine the whether park the FQ or not ++ * ++ * Determines whether or not a portal DQRR entry should be consumed once the ++ * enqueue command is completed. (And if so, and the DQRR entry corresponds ++ * to a held-active (order-preserving) FQ, whether the FQ should be parked ++ * instead of being rescheduled.) ++ */ ++void qbman_eq_desc_set_dca(struct qbman_eq_desc *, int enable, ++ uint32_t dqrr_idx, int park); ++ ++/** ++ * qbman_swp_enqueue() - Issue an enqueue command. ++ * @s: the software portal used for enqueue. ++ * @d: the enqueue descriptor. ++ * @fd: the frame descriptor to be enqueued. ++ * ++ * Please note that 'fd' should only be NULL if the "action" of the ++ * descriptor is "orp_hole" or "orp_nesn". ++ * ++ * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready. ++ */ ++int qbman_swp_enqueue(struct qbman_swp *, const struct qbman_eq_desc *, ++ const struct qbman_fd *fd); ++ ++/** ++ * qbman_swp_enqueue_thresh() - Set the threshold for EQRI interrupt. ++ * ++ * An EQRI interrupt can be generated when the fill-level of EQCR falls below ++ * the 'thresh' value set here. Setting thresh==0 (the default) disables. ++ */ ++int qbman_swp_enqueue_thresh(struct qbman_swp *, unsigned int thresh); ++ ++ /*******************/ ++ /* Buffer releases */ ++ /*******************/ ++/** ++ * struct qbman_release_desc - The structure for buffer release descriptor ++ */ ++struct qbman_release_desc { ++ uint32_t dont_manipulate_directly[1]; ++}; ++ ++/** ++ * qbman_release_desc_clear() - Clear the contents of a descriptor to ++ * default/starting state. ++ */ ++void qbman_release_desc_clear(struct qbman_release_desc *); ++ ++/** ++ * qbman_release_desc_set_bpid() - Set the ID of the buffer pool to release to ++ */ ++void qbman_release_desc_set_bpid(struct qbman_release_desc *, uint32_t bpid); ++ ++/** ++ * qbman_release_desc_set_rcdi() - Determines whether or not the portal's RCDI ++ * interrupt source should be asserted after the release command is completed. ++ */ ++void qbman_release_desc_set_rcdi(struct qbman_release_desc *, int enable); ++ ++/** ++ * qbman_swp_release() - Issue a buffer release command. ++ * @s: the software portal object. ++ * @d: the release descriptor. ++ * @buffers: a pointer pointing to the buffer address to be released. ++ * @num_buffers: number of buffers to be released, must be less than 8. ++ * ++ * Return 0 for success, -EBUSY if the release command ring is not ready. ++ */ ++int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d, ++ const uint64_t *buffers, unsigned int num_buffers); ++ ++ /*******************/ ++ /* Buffer acquires */ ++ /*******************/ ++ ++/** ++ * qbman_swp_acquire() - Issue a buffer acquire command. ++ * @s: the software portal object. ++ * @bpid: the buffer pool index. ++ * @buffers: a pointer pointing to the acquired buffer address|es. ++ * @num_buffers: number of buffers to be acquired, must be less than 8. ++ * ++ * Return 0 for success, or negative error code if the acquire command ++ * fails. ++ */ ++int qbman_swp_acquire(struct qbman_swp *, uint32_t bpid, uint64_t *buffers, ++ unsigned int num_buffers); ++ ++ /*****************/ ++ /* FQ management */ ++ /*****************/ ++ ++/** ++ * qbman_swp_fq_schedule() - Move the fq to the scheduled state. ++ * @s: the software portal object. ++ * @fqid: the index of frame queue to be scheduled. ++ * ++ * There are a couple of different ways that a FQ can end up parked state, ++ * This schedules it. ++ * ++ * Return 0 for success, or negative error code for failure. ++ */ ++int qbman_swp_fq_schedule(struct qbman_swp *s, uint32_t fqid); ++ ++/** ++ * qbman_swp_fq_force() - Force the FQ to fully scheduled state. ++ * @s: the software portal object. ++ * @fqid: the index of frame queue to be forced. ++ * ++ * Force eligible will force a tentatively-scheduled FQ to be fully-scheduled ++ * and thus be available for selection by any channel-dequeuing behaviour (push ++ * or pull). If the FQ is subsequently "dequeued" from the channel and is still ++ * empty at the time this happens, the resulting dq_entry will have no FD. ++ * (qbman_result_DQ_fd() will return NULL.) ++ * ++ * Return 0 for success, or negative error code for failure. ++ */ ++int qbman_swp_fq_force(struct qbman_swp *s, uint32_t fqid); ++ ++/** ++ * qbman_swp_fq_xon() ++ * qbman_swp_fq_xoff() - XON/XOFF the frame queue. ++ * @s: the software portal object. ++ * @fqid: the index of frame queue. ++ * ++ * These functions change the FQ flow-control stuff between XON/XOFF. (The ++ * default is XON.) This setting doesn't affect enqueues to the FQ, just ++ * dequeues. XOFF FQs will remain in the tenatively-scheduled state, even when ++ * non-empty, meaning they won't be selected for scheduled dequeuing. If a FQ is ++ * changed to XOFF after it had already become truly-scheduled to a channel, and ++ * a pull dequeue of that channel occurs that selects that FQ for dequeuing, ++ * then the resulting dq_entry will have no FD. (qbman_result_DQ_fd() will ++ * return NULL.) ++ * ++ * Return 0 for success, or negative error code for failure. ++ */ ++int qbman_swp_fq_xon(struct qbman_swp *s, uint32_t fqid); ++int qbman_swp_fq_xoff(struct qbman_swp *s, uint32_t fqid); ++ ++ /**********************/ ++ /* Channel management */ ++ /**********************/ ++ ++/* If the user has been allocated a channel object that is going to generate ++ * CDANs to another channel, then these functions will be necessary. ++ * CDAN-enabled channels only generate a single CDAN notification, after which ++ * it they need to be reenabled before they'll generate another. (The idea is ++ * that pull dequeuing will occur in reaction to the CDAN, followed by a ++ * reenable step.) Each function generates a distinct command to hardware, so a ++ * combination function is provided if the user wishes to modify the "context" ++ * (which shows up in each CDAN message) each time they reenable, as a single ++ * command to hardware. */ ++/** ++ * qbman_swp_CDAN_set_context() - Set CDAN context ++ * @s: the software portal object. ++ * @channelid: the channel index. ++ * @ctx: the context to be set in CDAN. ++ * ++ * Return 0 for success, or negative error code for failure. ++ */ ++int qbman_swp_CDAN_set_context(struct qbman_swp *, uint16_t channelid, ++ uint64_t ctx); ++ ++/** ++ * qbman_swp_CDAN_enable() - Enable CDAN for the channel. ++ * @s: the software portal object. ++ * @channelid: the index of the channel to generate CDAN. ++ * ++ * Return 0 for success, or negative error code for failure. ++ */ ++int qbman_swp_CDAN_enable(struct qbman_swp *, uint16_t channelid); ++ ++/** ++ * qbman_swp_CDAN_disable() - disable CDAN for the channel. ++ * @s: the software portal object. ++ * @channelid: the index of the channel to generate CDAN. ++ * ++ * Return 0 for success, or negative error code for failure. ++ */ ++int qbman_swp_CDAN_disable(struct qbman_swp *, uint16_t channelid); ++ ++/** ++ * qbman_swp_CDAN_set_context_enable() - Set CDAN contest and enable CDAN ++ * @s: the software portal object. ++ * @channelid: the index of the channel to generate CDAN. ++ * @ctx: the context set in CDAN. ++ * ++ * Return 0 for success, or negative error code for failure. ++ */ ++int qbman_swp_CDAN_set_context_enable(struct qbman_swp *, uint16_t channelid, ++ uint64_t ctx); ++ ++#endif /* !_FSL_QBMAN_PORTAL_H */ +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/qbman_debug.c +@@ -0,0 +1,846 @@ ++/* Copyright (C) 2015 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include "qbman_portal.h" ++#include "qbman_debug.h" ++#include "fsl_qbman_portal.h" ++ ++/* QBMan portal management command code */ ++#define QBMAN_BP_QUERY 0x32 ++#define QBMAN_FQ_QUERY 0x44 ++#define QBMAN_FQ_QUERY_NP 0x45 ++#define QBMAN_CGR_QUERY 0x51 ++#define QBMAN_WRED_QUERY 0x54 ++#define QBMAN_CGR_STAT_QUERY 0x55 ++#define QBMAN_CGR_STAT_QUERY_CLR 0x56 ++ ++enum qbman_attr_usage_e { ++ qbman_attr_usage_fq, ++ qbman_attr_usage_bpool, ++ qbman_attr_usage_cgr, ++}; ++ ++struct int_qbman_attr { ++ uint32_t words[32]; ++ enum qbman_attr_usage_e usage; ++}; ++ ++#define attr_type_set(a, e) \ ++{ \ ++ struct qbman_attr *__attr = a; \ ++ enum qbman_attr_usage_e __usage = e; \ ++ ((struct int_qbman_attr *)__attr)->usage = __usage; \ ++} ++ ++#define ATTR32(d) (&(d)->dont_manipulate_directly[0]) ++#define ATTR32_1(d) (&(d)->dont_manipulate_directly[16]) ++ ++static struct qb_attr_code code_bp_bpid = QB_CODE(0, 16, 16); ++static struct qb_attr_code code_bp_bdi = QB_CODE(1, 16, 1); ++static struct qb_attr_code code_bp_va = QB_CODE(1, 17, 1); ++static struct qb_attr_code code_bp_wae = QB_CODE(1, 18, 1); ++static struct qb_attr_code code_bp_swdet = QB_CODE(4, 0, 16); ++static struct qb_attr_code code_bp_swdxt = QB_CODE(4, 16, 16); ++static struct qb_attr_code code_bp_hwdet = QB_CODE(5, 0, 16); ++static struct qb_attr_code code_bp_hwdxt = QB_CODE(5, 16, 16); ++static struct qb_attr_code code_bp_swset = QB_CODE(6, 0, 16); ++static struct qb_attr_code code_bp_swsxt = QB_CODE(6, 16, 16); ++static struct qb_attr_code code_bp_vbpid = QB_CODE(7, 0, 14); ++static struct qb_attr_code code_bp_icid = QB_CODE(7, 16, 15); ++static struct qb_attr_code code_bp_pl = QB_CODE(7, 31, 1); ++static struct qb_attr_code code_bp_bpscn_addr_lo = QB_CODE(8, 0, 32); ++static struct qb_attr_code code_bp_bpscn_addr_hi = QB_CODE(9, 0, 32); ++static struct qb_attr_code code_bp_bpscn_ctx_lo = QB_CODE(10, 0, 32); ++static struct qb_attr_code code_bp_bpscn_ctx_hi = QB_CODE(11, 0, 32); ++static struct qb_attr_code code_bp_hw_targ = QB_CODE(12, 0, 16); ++static struct qb_attr_code code_bp_state = QB_CODE(1, 24, 3); ++static struct qb_attr_code code_bp_fill = QB_CODE(2, 0, 32); ++static struct qb_attr_code code_bp_hdptr = QB_CODE(3, 0, 32); ++static struct qb_attr_code code_bp_sdcnt = QB_CODE(13, 0, 8); ++static struct qb_attr_code code_bp_hdcnt = QB_CODE(13, 1, 8); ++static struct qb_attr_code code_bp_sscnt = QB_CODE(13, 2, 8); ++ ++void qbman_bp_attr_clear(struct qbman_attr *a) ++{ ++ memset(a, 0, sizeof(*a)); ++ attr_type_set(a, qbman_attr_usage_bpool); ++} ++ ++int qbman_bp_query(struct qbman_swp *s, uint32_t bpid, ++ struct qbman_attr *a) ++{ ++ uint32_t *p; ++ uint32_t verb, rslt; ++ uint32_t *attr = ATTR32(a); ++ ++ qbman_bp_attr_clear(a); ++ ++ /* Start the management command */ ++ p = qbman_swp_mc_start(s); ++ if (!p) ++ return -EBUSY; ++ ++ /* Encode the caller-provided attributes */ ++ qb_attr_code_encode(&code_bp_bpid, p, bpid); ++ ++ /* Complete the management command */ ++ p = qbman_swp_mc_complete(s, p, p[0] | QBMAN_BP_QUERY); ++ ++ /* Decode the outcome */ ++ verb = qb_attr_code_decode(&code_generic_verb, p); ++ rslt = qb_attr_code_decode(&code_generic_rslt, p); ++ BUG_ON(verb != QBMAN_BP_QUERY); ++ ++ /* Determine success or failure */ ++ if (unlikely(rslt != QBMAN_MC_RSLT_OK)) { ++ pr_err("Query of BPID 0x%x failed, code=0x%02x\n", bpid, rslt); ++ return -EIO; ++ } ++ ++ /* For the query, word[0] of the result contains only the ++ * verb/rslt fields, so skip word[0]. ++ */ ++ word_copy(&attr[1], &p[1], 15); ++ return 0; ++} ++ ++void qbman_bp_attr_get_bdi(struct qbman_attr *a, int *bdi, int *va, int *wae) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *bdi = !!qb_attr_code_decode(&code_bp_bdi, p); ++ *va = !!qb_attr_code_decode(&code_bp_va, p); ++ *wae = !!qb_attr_code_decode(&code_bp_wae, p); ++} ++ ++static uint32_t qbman_bp_thresh_to_value(uint32_t val) ++{ ++ return (val & 0xff) << ((val & 0xf00) >> 8); ++} ++ ++void qbman_bp_attr_get_swdet(struct qbman_attr *a, uint32_t *swdet) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *swdet = qbman_bp_thresh_to_value(qb_attr_code_decode(&code_bp_swdet, ++ p)); ++} ++void qbman_bp_attr_get_swdxt(struct qbman_attr *a, uint32_t *swdxt) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *swdxt = qbman_bp_thresh_to_value(qb_attr_code_decode(&code_bp_swdxt, ++ p)); ++} ++void qbman_bp_attr_get_hwdet(struct qbman_attr *a, uint32_t *hwdet) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *hwdet = qbman_bp_thresh_to_value(qb_attr_code_decode(&code_bp_hwdet, ++ p)); ++} ++void qbman_bp_attr_get_hwdxt(struct qbman_attr *a, uint32_t *hwdxt) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *hwdxt = qbman_bp_thresh_to_value(qb_attr_code_decode(&code_bp_hwdxt, ++ p)); ++} ++ ++void qbman_bp_attr_get_swset(struct qbman_attr *a, uint32_t *swset) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *swset = qbman_bp_thresh_to_value(qb_attr_code_decode(&code_bp_swset, ++ p)); ++} ++ ++void qbman_bp_attr_get_swsxt(struct qbman_attr *a, uint32_t *swsxt) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *swsxt = qbman_bp_thresh_to_value(qb_attr_code_decode(&code_bp_swsxt, ++ p)); ++} ++ ++void qbman_bp_attr_get_vbpid(struct qbman_attr *a, uint32_t *vbpid) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *vbpid = qb_attr_code_decode(&code_bp_vbpid, p); ++} ++ ++void qbman_bp_attr_get_icid(struct qbman_attr *a, uint32_t *icid, int *pl) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *icid = qb_attr_code_decode(&code_bp_icid, p); ++ *pl = !!qb_attr_code_decode(&code_bp_pl, p); ++} ++ ++void qbman_bp_attr_get_bpscn_addr(struct qbman_attr *a, uint64_t *bpscn_addr) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *bpscn_addr = ((uint64_t)qb_attr_code_decode(&code_bp_bpscn_addr_hi, ++ p) << 32) | ++ (uint64_t)qb_attr_code_decode(&code_bp_bpscn_addr_lo, ++ p); ++} ++ ++void qbman_bp_attr_get_bpscn_ctx(struct qbman_attr *a, uint64_t *bpscn_ctx) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *bpscn_ctx = ((uint64_t)qb_attr_code_decode(&code_bp_bpscn_ctx_hi, p) ++ << 32) | ++ (uint64_t)qb_attr_code_decode(&code_bp_bpscn_ctx_lo, ++ p); ++} ++ ++void qbman_bp_attr_get_hw_targ(struct qbman_attr *a, uint32_t *hw_targ) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ *hw_targ = qb_attr_code_decode(&code_bp_hw_targ, p); ++} ++ ++int qbman_bp_info_has_free_bufs(struct qbman_attr *a) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ return !(int)(qb_attr_code_decode(&code_bp_state, p) & 0x1); ++} ++ ++int qbman_bp_info_is_depleted(struct qbman_attr *a) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ return (int)(qb_attr_code_decode(&code_bp_state, p) & 0x2); ++} ++ ++int qbman_bp_info_is_surplus(struct qbman_attr *a) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ return (int)(qb_attr_code_decode(&code_bp_state, p) & 0x4); ++} ++ ++uint32_t qbman_bp_info_num_free_bufs(struct qbman_attr *a) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ return qb_attr_code_decode(&code_bp_fill, p); ++} ++ ++uint32_t qbman_bp_info_hdptr(struct qbman_attr *a) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ return qb_attr_code_decode(&code_bp_hdptr, p); ++} ++ ++uint32_t qbman_bp_info_sdcnt(struct qbman_attr *a) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ return qb_attr_code_decode(&code_bp_sdcnt, p); ++} ++ ++uint32_t qbman_bp_info_hdcnt(struct qbman_attr *a) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ return qb_attr_code_decode(&code_bp_hdcnt, p); ++} ++ ++uint32_t qbman_bp_info_sscnt(struct qbman_attr *a) ++{ ++ uint32_t *p = ATTR32(a); ++ ++ return qb_attr_code_decode(&code_bp_sscnt, p); ++} ++ ++static struct qb_attr_code code_fq_fqid = QB_CODE(1, 0, 24); ++static struct qb_attr_code code_fq_cgrid = QB_CODE(2, 16, 16); ++static struct qb_attr_code code_fq_destwq = QB_CODE(3, 0, 15); ++static struct qb_attr_code code_fq_fqctrl = QB_CODE(3, 24, 8); ++static struct qb_attr_code code_fq_icscred = QB_CODE(4, 0, 15); ++static struct qb_attr_code code_fq_tdthresh = QB_CODE(4, 16, 13); ++static struct qb_attr_code code_fq_oa_len = QB_CODE(5, 0, 12); ++static struct qb_attr_code code_fq_oa_ics = QB_CODE(5, 14, 1); ++static struct qb_attr_code code_fq_oa_cgr = QB_CODE(5, 15, 1); ++static struct qb_attr_code code_fq_mctl_bdi = QB_CODE(5, 24, 1); ++static struct qb_attr_code code_fq_mctl_ff = QB_CODE(5, 25, 1); ++static struct qb_attr_code code_fq_mctl_va = QB_CODE(5, 26, 1); ++static struct qb_attr_code code_fq_mctl_ps = QB_CODE(5, 27, 1); ++static struct qb_attr_code code_fq_ctx_lower32 = QB_CODE(6, 0, 32); ++static struct qb_attr_code code_fq_ctx_upper32 = QB_CODE(7, 0, 32); ++static struct qb_attr_code code_fq_icid = QB_CODE(8, 0, 15); ++static struct qb_attr_code code_fq_pl = QB_CODE(8, 15, 1); ++static struct qb_attr_code code_fq_vfqid = QB_CODE(9, 0, 24); ++static struct qb_attr_code code_fq_erfqid = QB_CODE(10, 0, 24); ++ ++void qbman_fq_attr_clear(struct qbman_attr *a) ++{ ++ memset(a, 0, sizeof(*a)); ++ attr_type_set(a, qbman_attr_usage_fq); ++} ++ ++/* FQ query function for programmable fields */ ++int qbman_fq_query(struct qbman_swp *s, uint32_t fqid, struct qbman_attr *desc) ++{ ++ uint32_t *p; ++ uint32_t verb, rslt; ++ uint32_t *d = ATTR32(desc); ++ ++ qbman_fq_attr_clear(desc); ++ ++ p = qbman_swp_mc_start(s); ++ if (!p) ++ return -EBUSY; ++ qb_attr_code_encode(&code_fq_fqid, p, fqid); ++ p = qbman_swp_mc_complete(s, p, QBMAN_FQ_QUERY); ++ ++ /* Decode the outcome */ ++ verb = qb_attr_code_decode(&code_generic_verb, p); ++ rslt = qb_attr_code_decode(&code_generic_rslt, p); ++ BUG_ON(verb != QBMAN_FQ_QUERY); ++ ++ /* Determine success or failure */ ++ if (unlikely(rslt != QBMAN_MC_RSLT_OK)) { ++ pr_err("Query of FQID 0x%x failed, code=0x%02x\n", ++ fqid, rslt); ++ return -EIO; ++ } ++ /* For the configure, word[0] of the command contains only the WE-mask. ++ * For the query, word[0] of the result contains only the verb/rslt ++ * fields. Skip word[0] in the latter case. */ ++ word_copy(&d[1], &p[1], 15); ++ return 0; ++} ++ ++void qbman_fq_attr_get_fqctrl(struct qbman_attr *d, uint32_t *fqctrl) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *fqctrl = qb_attr_code_decode(&code_fq_fqctrl, p); ++} ++ ++void qbman_fq_attr_get_cgrid(struct qbman_attr *d, uint32_t *cgrid) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *cgrid = qb_attr_code_decode(&code_fq_cgrid, p); ++} ++ ++void qbman_fq_attr_get_destwq(struct qbman_attr *d, uint32_t *destwq) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *destwq = qb_attr_code_decode(&code_fq_destwq, p); ++} ++ ++void qbman_fq_attr_get_icscred(struct qbman_attr *d, uint32_t *icscred) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *icscred = qb_attr_code_decode(&code_fq_icscred, p); ++} ++ ++static struct qb_attr_code code_tdthresh_exp = QB_CODE(0, 0, 5); ++static struct qb_attr_code code_tdthresh_mant = QB_CODE(0, 5, 8); ++static uint32_t qbman_thresh_to_value(uint32_t val) ++{ ++ uint32_t m, e; ++ ++ m = qb_attr_code_decode(&code_tdthresh_mant, &val); ++ e = qb_attr_code_decode(&code_tdthresh_exp, &val); ++ return m << e; ++} ++ ++void qbman_fq_attr_get_tdthresh(struct qbman_attr *d, uint32_t *tdthresh) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *tdthresh = qbman_thresh_to_value(qb_attr_code_decode(&code_fq_tdthresh, ++ p)); ++} ++ ++void qbman_fq_attr_get_oa(struct qbman_attr *d, ++ int *oa_ics, int *oa_cgr, int32_t *oa_len) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *oa_ics = !!qb_attr_code_decode(&code_fq_oa_ics, p); ++ *oa_cgr = !!qb_attr_code_decode(&code_fq_oa_cgr, p); ++ *oa_len = qb_attr_code_makesigned(&code_fq_oa_len, ++ qb_attr_code_decode(&code_fq_oa_len, p)); ++} ++ ++void qbman_fq_attr_get_mctl(struct qbman_attr *d, ++ int *bdi, int *ff, int *va, int *ps) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *bdi = !!qb_attr_code_decode(&code_fq_mctl_bdi, p); ++ *ff = !!qb_attr_code_decode(&code_fq_mctl_ff, p); ++ *va = !!qb_attr_code_decode(&code_fq_mctl_va, p); ++ *ps = !!qb_attr_code_decode(&code_fq_mctl_ps, p); ++} ++ ++void qbman_fq_attr_get_ctx(struct qbman_attr *d, uint32_t *hi, uint32_t *lo) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *hi = qb_attr_code_decode(&code_fq_ctx_upper32, p); ++ *lo = qb_attr_code_decode(&code_fq_ctx_lower32, p); ++} ++ ++void qbman_fq_attr_get_icid(struct qbman_attr *d, uint32_t *icid, int *pl) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *icid = qb_attr_code_decode(&code_fq_icid, p); ++ *pl = !!qb_attr_code_decode(&code_fq_pl, p); ++} ++ ++void qbman_fq_attr_get_vfqid(struct qbman_attr *d, uint32_t *vfqid) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *vfqid = qb_attr_code_decode(&code_fq_vfqid, p); ++} ++ ++void qbman_fq_attr_get_erfqid(struct qbman_attr *d, uint32_t *erfqid) ++{ ++ uint32_t *p = ATTR32(d); ++ ++ *erfqid = qb_attr_code_decode(&code_fq_erfqid, p); ++} ++ ++/* Query FQ Non-Programmalbe Fields */ ++static struct qb_attr_code code_fq_np_state = QB_CODE(0, 16, 3); ++static struct qb_attr_code code_fq_np_fe = QB_CODE(0, 19, 1); ++static struct qb_attr_code code_fq_np_x = QB_CODE(0, 20, 1); ++static struct qb_attr_code code_fq_np_r = QB_CODE(0, 21, 1); ++static struct qb_attr_code code_fq_np_oe = QB_CODE(0, 22, 1); ++static struct qb_attr_code code_fq_np_frm_cnt = QB_CODE(6, 0, 24); ++static struct qb_attr_code code_fq_np_byte_cnt = QB_CODE(7, 0, 32); ++ ++int qbman_fq_query_state(struct qbman_swp *s, uint32_t fqid, ++ struct qbman_attr *state) ++{ ++ uint32_t *p; ++ uint32_t verb, rslt; ++ uint32_t *d = ATTR32(state); ++ ++ qbman_fq_attr_clear(state); ++ ++ p = qbman_swp_mc_start(s); ++ if (!p) ++ return -EBUSY; ++ qb_attr_code_encode(&code_fq_fqid, p, fqid); ++ p = qbman_swp_mc_complete(s, p, QBMAN_FQ_QUERY_NP); ++ ++ /* Decode the outcome */ ++ verb = qb_attr_code_decode(&code_generic_verb, p); ++ rslt = qb_attr_code_decode(&code_generic_rslt, p); ++ BUG_ON(verb != QBMAN_FQ_QUERY_NP); ++ ++ /* Determine success or failure */ ++ if (unlikely(rslt != QBMAN_MC_RSLT_OK)) { ++ pr_err("Query NP fields of FQID 0x%x failed, code=0x%02x\n", ++ fqid, rslt); ++ return -EIO; ++ } ++ word_copy(&d[0], &p[0], 16); ++ return 0; ++} ++ ++uint32_t qbman_fq_state_schedstate(const struct qbman_attr *state) ++{ ++ const uint32_t *p = ATTR32(state); ++ ++ return qb_attr_code_decode(&code_fq_np_state, p); ++} ++ ++int qbman_fq_state_force_eligible(const struct qbman_attr *state) ++{ ++ const uint32_t *p = ATTR32(state); ++ ++ return !!qb_attr_code_decode(&code_fq_np_fe, p); ++} ++ ++int qbman_fq_state_xoff(const struct qbman_attr *state) ++{ ++ const uint32_t *p = ATTR32(state); ++ ++ return !!qb_attr_code_decode(&code_fq_np_x, p); ++} ++ ++int qbman_fq_state_retirement_pending(const struct qbman_attr *state) ++{ ++ const uint32_t *p = ATTR32(state); ++ ++ return !!qb_attr_code_decode(&code_fq_np_r, p); ++} ++ ++int qbman_fq_state_overflow_error(const struct qbman_attr *state) ++{ ++ const uint32_t *p = ATTR32(state); ++ ++ return !!qb_attr_code_decode(&code_fq_np_oe, p); ++} ++ ++uint32_t qbman_fq_state_frame_count(const struct qbman_attr *state) ++{ ++ const uint32_t *p = ATTR32(state); ++ ++ return qb_attr_code_decode(&code_fq_np_frm_cnt, p); ++} ++ ++uint32_t qbman_fq_state_byte_count(const struct qbman_attr *state) ++{ ++ const uint32_t *p = ATTR32(state); ++ ++ return qb_attr_code_decode(&code_fq_np_byte_cnt, p); ++} ++ ++/* Query CGR */ ++static struct qb_attr_code code_cgr_cgid = QB_CODE(0, 16, 16); ++static struct qb_attr_code code_cgr_cscn_wq_en_enter = QB_CODE(2, 0, 1); ++static struct qb_attr_code code_cgr_cscn_wq_en_exit = QB_CODE(2, 1, 1); ++static struct qb_attr_code code_cgr_cscn_wq_icd = QB_CODE(2, 2, 1); ++static struct qb_attr_code code_cgr_mode = QB_CODE(3, 16, 2); ++static struct qb_attr_code code_cgr_rej_cnt_mode = QB_CODE(3, 18, 1); ++static struct qb_attr_code code_cgr_cscn_bdi = QB_CODE(3, 19, 1); ++static struct qb_attr_code code_cgr_cscn_wr_en_enter = QB_CODE(3, 24, 1); ++static struct qb_attr_code code_cgr_cscn_wr_en_exit = QB_CODE(3, 25, 1); ++static struct qb_attr_code code_cgr_cg_wr_ae = QB_CODE(3, 26, 1); ++static struct qb_attr_code code_cgr_cscn_dcp_en = QB_CODE(3, 27, 1); ++static struct qb_attr_code code_cgr_cg_wr_va = QB_CODE(3, 28, 1); ++static struct qb_attr_code code_cgr_i_cnt_wr_en = QB_CODE(4, 0, 1); ++static struct qb_attr_code code_cgr_i_cnt_wr_bnd = QB_CODE(4, 1, 5); ++static struct qb_attr_code code_cgr_td_en = QB_CODE(4, 8, 1); ++static struct qb_attr_code code_cgr_cs_thres = QB_CODE(4, 16, 13); ++static struct qb_attr_code code_cgr_cs_thres_x = QB_CODE(5, 0, 13); ++static struct qb_attr_code code_cgr_td_thres = QB_CODE(5, 16, 13); ++static struct qb_attr_code code_cgr_cscn_tdcp = QB_CODE(6, 0, 16); ++static struct qb_attr_code code_cgr_cscn_wqid = QB_CODE(6, 16, 16); ++static struct qb_attr_code code_cgr_cscn_vcgid = QB_CODE(7, 0, 16); ++static struct qb_attr_code code_cgr_cg_icid = QB_CODE(7, 16, 15); ++static struct qb_attr_code code_cgr_cg_pl = QB_CODE(7, 31, 1); ++static struct qb_attr_code code_cgr_cg_wr_addr_lo = QB_CODE(8, 0, 32); ++static struct qb_attr_code code_cgr_cg_wr_addr_hi = QB_CODE(9, 0, 32); ++static struct qb_attr_code code_cgr_cscn_ctx_lo = QB_CODE(10, 0, 32); ++static struct qb_attr_code code_cgr_cscn_ctx_hi = QB_CODE(11, 0, 32); ++ ++void qbman_cgr_attr_clear(struct qbman_attr *a) ++{ ++ memset(a, 0, sizeof(*a)); ++ attr_type_set(a, qbman_attr_usage_cgr); ++} ++ ++int qbman_cgr_query(struct qbman_swp *s, uint32_t cgid, struct qbman_attr *attr) ++{ ++ uint32_t *p; ++ uint32_t verb, rslt; ++ uint32_t *d[2]; ++ int i; ++ uint32_t query_verb; ++ ++ d[0] = ATTR32(attr); ++ d[1] = ATTR32_1(attr); ++ ++ qbman_cgr_attr_clear(attr); ++ ++ for (i = 0; i < 2; i++) { ++ p = qbman_swp_mc_start(s); ++ if (!p) ++ return -EBUSY; ++ query_verb = i ? QBMAN_WRED_QUERY : QBMAN_CGR_QUERY; ++ ++ qb_attr_code_encode(&code_cgr_cgid, p, cgid); ++ p = qbman_swp_mc_complete(s, p, p[0] | query_verb); ++ ++ /* Decode the outcome */ ++ verb = qb_attr_code_decode(&code_generic_verb, p); ++ rslt = qb_attr_code_decode(&code_generic_rslt, p); ++ BUG_ON(verb != query_verb); ++ ++ /* Determine success or failure */ ++ if (unlikely(rslt != QBMAN_MC_RSLT_OK)) { ++ pr_err("Query CGID 0x%x failed,", cgid); ++ pr_err(" verb=0x%02x, code=0x%02x\n", verb, rslt); ++ return -EIO; ++ } ++ /* For the configure, word[0] of the command contains only the ++ * verb/cgid. For the query, word[0] of the result contains ++ * only the verb/rslt fields. Skip word[0] in the latter case. ++ */ ++ word_copy(&d[i][1], &p[1], 15); ++ } ++ return 0; ++} ++ ++void qbman_cgr_attr_get_ctl1(struct qbman_attr *d, int *cscn_wq_en_enter, ++ int *cscn_wq_en_exit, int *cscn_wq_icd) ++ { ++ uint32_t *p = ATTR32(d); ++ *cscn_wq_en_enter = !!qb_attr_code_decode(&code_cgr_cscn_wq_en_enter, ++ p); ++ *cscn_wq_en_exit = !!qb_attr_code_decode(&code_cgr_cscn_wq_en_exit, p); ++ *cscn_wq_icd = !!qb_attr_code_decode(&code_cgr_cscn_wq_icd, p); ++} ++ ++void qbman_cgr_attr_get_mode(struct qbman_attr *d, uint32_t *mode, ++ int *rej_cnt_mode, int *cscn_bdi) ++{ ++ uint32_t *p = ATTR32(d); ++ *mode = qb_attr_code_decode(&code_cgr_mode, p); ++ *rej_cnt_mode = !!qb_attr_code_decode(&code_cgr_rej_cnt_mode, p); ++ *cscn_bdi = !!qb_attr_code_decode(&code_cgr_cscn_bdi, p); ++} ++ ++void qbman_cgr_attr_get_ctl2(struct qbman_attr *d, int *cscn_wr_en_enter, ++ int *cscn_wr_en_exit, int *cg_wr_ae, ++ int *cscn_dcp_en, int *cg_wr_va) ++{ ++ uint32_t *p = ATTR32(d); ++ *cscn_wr_en_enter = !!qb_attr_code_decode(&code_cgr_cscn_wr_en_enter, ++ p); ++ *cscn_wr_en_exit = !!qb_attr_code_decode(&code_cgr_cscn_wr_en_exit, p); ++ *cg_wr_ae = !!qb_attr_code_decode(&code_cgr_cg_wr_ae, p); ++ *cscn_dcp_en = !!qb_attr_code_decode(&code_cgr_cscn_dcp_en, p); ++ *cg_wr_va = !!qb_attr_code_decode(&code_cgr_cg_wr_va, p); ++} ++ ++void qbman_cgr_attr_get_iwc(struct qbman_attr *d, int *i_cnt_wr_en, ++ uint32_t *i_cnt_wr_bnd) ++{ ++ uint32_t *p = ATTR32(d); ++ *i_cnt_wr_en = !!qb_attr_code_decode(&code_cgr_i_cnt_wr_en, p); ++ *i_cnt_wr_bnd = qb_attr_code_decode(&code_cgr_i_cnt_wr_bnd, p); ++} ++ ++void qbman_cgr_attr_get_tdc(struct qbman_attr *d, int *td_en) ++{ ++ uint32_t *p = ATTR32(d); ++ *td_en = !!qb_attr_code_decode(&code_cgr_td_en, p); ++} ++ ++void qbman_cgr_attr_get_cs_thres(struct qbman_attr *d, uint32_t *cs_thres) ++{ ++ uint32_t *p = ATTR32(d); ++ *cs_thres = qbman_thresh_to_value(qb_attr_code_decode( ++ &code_cgr_cs_thres, p)); ++} ++ ++void qbman_cgr_attr_get_cs_thres_x(struct qbman_attr *d, ++ uint32_t *cs_thres_x) ++{ ++ uint32_t *p = ATTR32(d); ++ *cs_thres_x = qbman_thresh_to_value(qb_attr_code_decode( ++ &code_cgr_cs_thres_x, p)); ++} ++ ++void qbman_cgr_attr_get_td_thres(struct qbman_attr *d, uint32_t *td_thres) ++{ ++ uint32_t *p = ATTR32(d); ++ *td_thres = qbman_thresh_to_value(qb_attr_code_decode( ++ &code_cgr_td_thres, p)); ++} ++ ++void qbman_cgr_attr_get_cscn_tdcp(struct qbman_attr *d, uint32_t *cscn_tdcp) ++{ ++ uint32_t *p = ATTR32(d); ++ *cscn_tdcp = qb_attr_code_decode(&code_cgr_cscn_tdcp, p); ++} ++ ++void qbman_cgr_attr_get_cscn_wqid(struct qbman_attr *d, uint32_t *cscn_wqid) ++{ ++ uint32_t *p = ATTR32(d); ++ *cscn_wqid = qb_attr_code_decode(&code_cgr_cscn_wqid, p); ++} ++ ++void qbman_cgr_attr_get_cscn_vcgid(struct qbman_attr *d, ++ uint32_t *cscn_vcgid) ++{ ++ uint32_t *p = ATTR32(d); ++ *cscn_vcgid = qb_attr_code_decode(&code_cgr_cscn_vcgid, p); ++} ++ ++void qbman_cgr_attr_get_cg_icid(struct qbman_attr *d, uint32_t *icid, ++ int *pl) ++{ ++ uint32_t *p = ATTR32(d); ++ *icid = qb_attr_code_decode(&code_cgr_cg_icid, p); ++ *pl = !!qb_attr_code_decode(&code_cgr_cg_pl, p); ++} ++ ++void qbman_cgr_attr_get_cg_wr_addr(struct qbman_attr *d, ++ uint64_t *cg_wr_addr) ++{ ++ uint32_t *p = ATTR32(d); ++ *cg_wr_addr = ((uint64_t)qb_attr_code_decode(&code_cgr_cg_wr_addr_hi, ++ p) << 32) | ++ (uint64_t)qb_attr_code_decode(&code_cgr_cg_wr_addr_lo, ++ p); ++} ++ ++void qbman_cgr_attr_get_cscn_ctx(struct qbman_attr *d, uint64_t *cscn_ctx) ++{ ++ uint32_t *p = ATTR32(d); ++ *cscn_ctx = ((uint64_t)qb_attr_code_decode(&code_cgr_cscn_ctx_hi, p) ++ << 32) | ++ (uint64_t)qb_attr_code_decode(&code_cgr_cscn_ctx_lo, p); ++} ++ ++#define WRED_EDP_WORD(n) (18 + n/4) ++#define WRED_EDP_OFFSET(n) (8 * (n % 4)) ++#define WRED_PARM_DP_WORD(n) (n + 20) ++#define WRED_WE_EDP(n) (16 + n * 2) ++#define WRED_WE_PARM_DP(n) (17 + n * 2) ++void qbman_cgr_attr_wred_get_edp(struct qbman_attr *d, uint32_t idx, ++ int *edp) ++{ ++ uint32_t *p = ATTR32(d); ++ struct qb_attr_code code_wred_edp = QB_CODE(WRED_EDP_WORD(idx), ++ WRED_EDP_OFFSET(idx), 8); ++ *edp = (int)qb_attr_code_decode(&code_wred_edp, p); ++} ++ ++void qbman_cgr_attr_wred_dp_decompose(uint32_t dp, uint64_t *minth, ++ uint64_t *maxth, uint8_t *maxp) ++{ ++ uint8_t ma, mn, step_i, step_s, pn; ++ ++ ma = (uint8_t)(dp >> 24); ++ mn = (uint8_t)(dp >> 19) & 0x1f; ++ step_i = (uint8_t)(dp >> 11); ++ step_s = (uint8_t)(dp >> 6) & 0x1f; ++ pn = (uint8_t)dp & 0x3f; ++ ++ *maxp = ((pn<<2) * 100)/256; ++ ++ if (mn == 0) ++ *maxth = ma; ++ else ++ *maxth = ((ma+256) * (1<<(mn-1))); ++ ++ if (step_s == 0) ++ *minth = *maxth - step_i; ++ else ++ *minth = *maxth - (256 + step_i) * (1<<(step_s - 1)); ++} ++ ++void qbman_cgr_attr_wred_get_parm_dp(struct qbman_attr *d, uint32_t idx, ++ uint32_t *dp) ++{ ++ uint32_t *p = ATTR32(d); ++ struct qb_attr_code code_wred_parm_dp = QB_CODE(WRED_PARM_DP_WORD(idx), ++ 0, 8); ++ *dp = qb_attr_code_decode(&code_wred_parm_dp, p); ++} ++ ++/* Query CGR/CCGR/CQ statistics */ ++static struct qb_attr_code code_cgr_stat_ct = QB_CODE(4, 0, 32); ++static struct qb_attr_code code_cgr_stat_frame_cnt_lo = QB_CODE(4, 0, 32); ++static struct qb_attr_code code_cgr_stat_frame_cnt_hi = QB_CODE(5, 0, 8); ++static struct qb_attr_code code_cgr_stat_byte_cnt_lo = QB_CODE(6, 0, 32); ++static struct qb_attr_code code_cgr_stat_byte_cnt_hi = QB_CODE(7, 0, 16); ++static int qbman_cgr_statistics_query(struct qbman_swp *s, uint32_t cgid, ++ int clear, uint32_t command_type, ++ uint64_t *frame_cnt, uint64_t *byte_cnt) ++{ ++ uint32_t *p; ++ uint32_t verb, rslt; ++ uint32_t query_verb; ++ uint32_t hi, lo; ++ ++ p = qbman_swp_mc_start(s); ++ if (!p) ++ return -EBUSY; ++ ++ qb_attr_code_encode(&code_cgr_cgid, p, cgid); ++ if (command_type < 2) ++ qb_attr_code_encode(&code_cgr_stat_ct, p, command_type); ++ query_verb = clear ? ++ QBMAN_CGR_STAT_QUERY_CLR : QBMAN_CGR_STAT_QUERY; ++ p = qbman_swp_mc_complete(s, p, p[0] | query_verb); ++ ++ /* Decode the outcome */ ++ verb = qb_attr_code_decode(&code_generic_verb, p); ++ rslt = qb_attr_code_decode(&code_generic_rslt, p); ++ BUG_ON(verb != query_verb); ++ ++ /* Determine success or failure */ ++ if (unlikely(rslt != QBMAN_MC_RSLT_OK)) { ++ pr_err("Query statistics of CGID 0x%x failed,", cgid); ++ pr_err(" verb=0x%02x code=0x%02x\n", verb, rslt); ++ return -EIO; ++ } ++ ++ if (*frame_cnt) { ++ hi = qb_attr_code_decode(&code_cgr_stat_frame_cnt_hi, p); ++ lo = qb_attr_code_decode(&code_cgr_stat_frame_cnt_lo, p); ++ *frame_cnt = ((uint64_t)hi << 32) | (uint64_t)lo; ++ } ++ if (*byte_cnt) { ++ hi = qb_attr_code_decode(&code_cgr_stat_byte_cnt_hi, p); ++ lo = qb_attr_code_decode(&code_cgr_stat_byte_cnt_lo, p); ++ *byte_cnt = ((uint64_t)hi << 32) | (uint64_t)lo; ++ } ++ ++ return 0; ++} ++ ++int qbman_cgr_reject_statistics(struct qbman_swp *s, uint32_t cgid, int clear, ++ uint64_t *frame_cnt, uint64_t *byte_cnt) ++{ ++ return qbman_cgr_statistics_query(s, cgid, clear, 0xff, ++ frame_cnt, byte_cnt); ++} ++ ++int qbman_ccgr_reject_statistics(struct qbman_swp *s, uint32_t cgid, int clear, ++ uint64_t *frame_cnt, uint64_t *byte_cnt) ++{ ++ return qbman_cgr_statistics_query(s, cgid, clear, 1, ++ frame_cnt, byte_cnt); ++} ++ ++int qbman_cq_dequeue_statistics(struct qbman_swp *s, uint32_t cgid, int clear, ++ uint64_t *frame_cnt, uint64_t *byte_cnt) ++{ ++ return qbman_cgr_statistics_query(s, cgid, clear, 0, ++ frame_cnt, byte_cnt); ++} +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/qbman_debug.h +@@ -0,0 +1,136 @@ ++/* Copyright (C) 2015 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++struct qbman_attr { ++ uint32_t dont_manipulate_directly[40]; ++}; ++ ++/* Buffer pool query commands */ ++int qbman_bp_query(struct qbman_swp *s, uint32_t bpid, ++ struct qbman_attr *a); ++void qbman_bp_attr_get_bdi(struct qbman_attr *a, int *bdi, int *va, int *wae); ++void qbman_bp_attr_get_swdet(struct qbman_attr *a, uint32_t *swdet); ++void qbman_bp_attr_get_swdxt(struct qbman_attr *a, uint32_t *swdxt); ++void qbman_bp_attr_get_hwdet(struct qbman_attr *a, uint32_t *hwdet); ++void qbman_bp_attr_get_hwdxt(struct qbman_attr *a, uint32_t *hwdxt); ++void qbman_bp_attr_get_swset(struct qbman_attr *a, uint32_t *swset); ++void qbman_bp_attr_get_swsxt(struct qbman_attr *a, uint32_t *swsxt); ++void qbman_bp_attr_get_vbpid(struct qbman_attr *a, uint32_t *vbpid); ++void qbman_bp_attr_get_icid(struct qbman_attr *a, uint32_t *icid, int *pl); ++void qbman_bp_attr_get_bpscn_addr(struct qbman_attr *a, uint64_t *bpscn_addr); ++void qbman_bp_attr_get_bpscn_ctx(struct qbman_attr *a, uint64_t *bpscn_ctx); ++void qbman_bp_attr_get_hw_targ(struct qbman_attr *a, uint32_t *hw_targ); ++int qbman_bp_info_has_free_bufs(struct qbman_attr *a); ++int qbman_bp_info_is_depleted(struct qbman_attr *a); ++int qbman_bp_info_is_surplus(struct qbman_attr *a); ++uint32_t qbman_bp_info_num_free_bufs(struct qbman_attr *a); ++uint32_t qbman_bp_info_hdptr(struct qbman_attr *a); ++uint32_t qbman_bp_info_sdcnt(struct qbman_attr *a); ++uint32_t qbman_bp_info_hdcnt(struct qbman_attr *a); ++uint32_t qbman_bp_info_sscnt(struct qbman_attr *a); ++ ++/* FQ query function for programmable fields */ ++int qbman_fq_query(struct qbman_swp *s, uint32_t fqid, ++ struct qbman_attr *desc); ++void qbman_fq_attr_get_fqctrl(struct qbman_attr *d, uint32_t *fqctrl); ++void qbman_fq_attr_get_cgrid(struct qbman_attr *d, uint32_t *cgrid); ++void qbman_fq_attr_get_destwq(struct qbman_attr *d, uint32_t *destwq); ++void qbman_fq_attr_get_icscred(struct qbman_attr *d, uint32_t *icscred); ++void qbman_fq_attr_get_tdthresh(struct qbman_attr *d, uint32_t *tdthresh); ++void qbman_fq_attr_get_oa(struct qbman_attr *d, ++ int *oa_ics, int *oa_cgr, int32_t *oa_len); ++void qbman_fq_attr_get_mctl(struct qbman_attr *d, ++ int *bdi, int *ff, int *va, int *ps); ++void qbman_fq_attr_get_ctx(struct qbman_attr *d, uint32_t *hi, uint32_t *lo); ++void qbman_fq_attr_get_icid(struct qbman_attr *d, uint32_t *icid, int *pl); ++void qbman_fq_attr_get_vfqid(struct qbman_attr *d, uint32_t *vfqid); ++void qbman_fq_attr_get_erfqid(struct qbman_attr *d, uint32_t *erfqid); ++ ++/* FQ query command for non-programmable fields*/ ++enum qbman_fq_schedstate_e { ++ qbman_fq_schedstate_oos = 0, ++ qbman_fq_schedstate_retired, ++ qbman_fq_schedstate_tentatively_scheduled, ++ qbman_fq_schedstate_truly_scheduled, ++ qbman_fq_schedstate_parked, ++ qbman_fq_schedstate_held_active, ++}; ++ ++int qbman_fq_query_state(struct qbman_swp *s, uint32_t fqid, ++ struct qbman_attr *state); ++uint32_t qbman_fq_state_schedstate(const struct qbman_attr *state); ++int qbman_fq_state_force_eligible(const struct qbman_attr *state); ++int qbman_fq_state_xoff(const struct qbman_attr *state); ++int qbman_fq_state_retirement_pending(const struct qbman_attr *state); ++int qbman_fq_state_overflow_error(const struct qbman_attr *state); ++uint32_t qbman_fq_state_frame_count(const struct qbman_attr *state); ++uint32_t qbman_fq_state_byte_count(const struct qbman_attr *state); ++ ++/* CGR query */ ++int qbman_cgr_query(struct qbman_swp *s, uint32_t cgid, ++ struct qbman_attr *attr); ++void qbman_cgr_attr_get_ctl1(struct qbman_attr *d, int *cscn_wq_en_enter, ++ int *cscn_wq_en_exit, int *cscn_wq_icd); ++void qbman_cgr_attr_get_mode(struct qbman_attr *d, uint32_t *mode, ++ int *rej_cnt_mode, int *cscn_bdi); ++void qbman_cgr_attr_get_ctl2(struct qbman_attr *d, int *cscn_wr_en_enter, ++ int *cscn_wr_en_exit, int *cg_wr_ae, ++ int *cscn_dcp_en, int *cg_wr_va); ++void qbman_cgr_attr_get_iwc(struct qbman_attr *d, int *i_cnt_wr_en, ++ uint32_t *i_cnt_wr_bnd); ++void qbman_cgr_attr_get_tdc(struct qbman_attr *d, int *td_en); ++void qbman_cgr_attr_get_cs_thres(struct qbman_attr *d, uint32_t *cs_thres); ++void qbman_cgr_attr_get_cs_thres_x(struct qbman_attr *d, ++ uint32_t *cs_thres_x); ++void qbman_cgr_attr_get_td_thres(struct qbman_attr *d, uint32_t *td_thres); ++void qbman_cgr_attr_get_cscn_tdcp(struct qbman_attr *d, uint32_t *cscn_tdcp); ++void qbman_cgr_attr_get_cscn_wqid(struct qbman_attr *d, uint32_t *cscn_wqid); ++void qbman_cgr_attr_get_cscn_vcgid(struct qbman_attr *d, ++ uint32_t *cscn_vcgid); ++void qbman_cgr_attr_get_cg_icid(struct qbman_attr *d, uint32_t *icid, ++ int *pl); ++void qbman_cgr_attr_get_cg_wr_addr(struct qbman_attr *d, ++ uint64_t *cg_wr_addr); ++void qbman_cgr_attr_get_cscn_ctx(struct qbman_attr *d, uint64_t *cscn_ctx); ++void qbman_cgr_attr_wred_get_edp(struct qbman_attr *d, uint32_t idx, ++ int *edp); ++void qbman_cgr_attr_wred_dp_decompose(uint32_t dp, uint64_t *minth, ++ uint64_t *maxth, uint8_t *maxp); ++void qbman_cgr_attr_wred_get_parm_dp(struct qbman_attr *d, uint32_t idx, ++ uint32_t *dp); ++ ++/* CGR/CCGR/CQ statistics query */ ++int qbman_cgr_reject_statistics(struct qbman_swp *s, uint32_t cgid, int clear, ++ uint64_t *frame_cnt, uint64_t *byte_cnt); ++int qbman_ccgr_reject_statistics(struct qbman_swp *s, uint32_t cgid, int clear, ++ uint64_t *frame_cnt, uint64_t *byte_cnt); ++int qbman_cq_dequeue_statistics(struct qbman_swp *s, uint32_t cgid, int clear, ++ uint64_t *frame_cnt, uint64_t *byte_cnt); +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/qbman_portal.c +@@ -0,0 +1,1212 @@ ++/* Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include "qbman_portal.h" ++ ++/* QBMan portal management command codes */ ++#define QBMAN_MC_ACQUIRE 0x30 ++#define QBMAN_WQCHAN_CONFIGURE 0x46 ++ ++/* CINH register offsets */ ++#define QBMAN_CINH_SWP_EQAR 0x8c0 ++#define QBMAN_CINH_SWP_DQPI 0xa00 ++#define QBMAN_CINH_SWP_DCAP 0xac0 ++#define QBMAN_CINH_SWP_SDQCR 0xb00 ++#define QBMAN_CINH_SWP_RAR 0xcc0 ++#define QBMAN_CINH_SWP_ISR 0xe00 ++#define QBMAN_CINH_SWP_IER 0xe40 ++#define QBMAN_CINH_SWP_ISDR 0xe80 ++#define QBMAN_CINH_SWP_IIR 0xec0 ++ ++/* CENA register offsets */ ++#define QBMAN_CENA_SWP_EQCR(n) (0x000 + ((uint32_t)(n) << 6)) ++#define QBMAN_CENA_SWP_DQRR(n) (0x200 + ((uint32_t)(n) << 6)) ++#define QBMAN_CENA_SWP_RCR(n) (0x400 + ((uint32_t)(n) << 6)) ++#define QBMAN_CENA_SWP_CR 0x600 ++#define QBMAN_CENA_SWP_RR(vb) (0x700 + ((uint32_t)(vb) >> 1)) ++#define QBMAN_CENA_SWP_VDQCR 0x780 ++ ++/* Reverse mapping of QBMAN_CENA_SWP_DQRR() */ ++#define QBMAN_IDX_FROM_DQRR(p) (((unsigned long)p & 0x1ff) >> 6) ++ ++/* QBMan FQ management command codes */ ++#define QBMAN_FQ_SCHEDULE 0x48 ++#define QBMAN_FQ_FORCE 0x49 ++#define QBMAN_FQ_XON 0x4d ++#define QBMAN_FQ_XOFF 0x4e ++ ++/*******************************/ ++/* Pre-defined attribute codes */ ++/*******************************/ ++ ++struct qb_attr_code code_generic_verb = QB_CODE(0, 0, 7); ++struct qb_attr_code code_generic_rslt = QB_CODE(0, 8, 8); ++ ++/*************************/ ++/* SDQCR attribute codes */ ++/*************************/ ++ ++/* we put these here because at least some of them are required by ++ * qbman_swp_init() */ ++struct qb_attr_code code_sdqcr_dct = QB_CODE(0, 24, 2); ++struct qb_attr_code code_sdqcr_fc = QB_CODE(0, 29, 1); ++struct qb_attr_code code_sdqcr_tok = QB_CODE(0, 16, 8); ++#define CODE_SDQCR_DQSRC(n) QB_CODE(0, n, 1) ++enum qbman_sdqcr_dct { ++ qbman_sdqcr_dct_null = 0, ++ qbman_sdqcr_dct_prio_ics, ++ qbman_sdqcr_dct_active_ics, ++ qbman_sdqcr_dct_active ++}; ++enum qbman_sdqcr_fc { ++ qbman_sdqcr_fc_one = 0, ++ qbman_sdqcr_fc_up_to_3 = 1 ++}; ++struct qb_attr_code code_sdqcr_dqsrc = QB_CODE(0, 0, 16); ++ ++/*********************************/ ++/* Portal constructor/destructor */ ++/*********************************/ ++ ++/* Software portals should always be in the power-on state when we initialise, ++ * due to the CCSR-based portal reset functionality that MC has. ++ * ++ * Erk! Turns out that QMan versions prior to 4.1 do not correctly reset DQRR ++ * valid-bits, so we need to support a workaround where we don't trust ++ * valid-bits when detecting new entries until any stale ring entries have been ++ * overwritten at least once. The idea is that we read PI for the first few ++ * entries, then switch to valid-bit after that. The trick is to clear the ++ * bug-work-around boolean once the PI wraps around the ring for the first time. ++ * ++ * Note: this still carries a slight additional cost once the decrementer hits ++ * zero, so ideally the workaround should only be compiled in if the compiled ++ * image needs to support affected chips. We use WORKAROUND_DQRR_RESET_BUG for ++ * this. ++ */ ++struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d) ++{ ++ int ret; ++ struct qbman_swp *p = kmalloc(sizeof(*p), GFP_KERNEL); ++ ++ if (!p) ++ return NULL; ++ p->desc = d; ++#ifdef QBMAN_CHECKING ++ p->mc.check = swp_mc_can_start; ++#endif ++ p->mc.valid_bit = QB_VALID_BIT; ++ p->sdq = 0; ++ qb_attr_code_encode(&code_sdqcr_dct, &p->sdq, qbman_sdqcr_dct_prio_ics); ++ qb_attr_code_encode(&code_sdqcr_fc, &p->sdq, qbman_sdqcr_fc_up_to_3); ++ qb_attr_code_encode(&code_sdqcr_tok, &p->sdq, 0xbb); ++ atomic_set(&p->vdq.busy, 1); ++ p->vdq.valid_bit = QB_VALID_BIT; ++ p->dqrr.next_idx = 0; ++ p->dqrr.valid_bit = QB_VALID_BIT; ++ /* TODO: should also read PI/CI type registers and check that they're on ++ * PoR values. If we're asked to initialise portals that aren't in reset ++ * state, bad things will follow. */ ++#ifdef WORKAROUND_DQRR_RESET_BUG ++ p->dqrr.reset_bug = 1; ++#endif ++ if ((p->desc->qman_version & 0xFFFF0000) < QMAN_REV_4100) ++ p->dqrr.dqrr_size = 4; ++ else ++ p->dqrr.dqrr_size = 8; ++ ret = qbman_swp_sys_init(&p->sys, d, p->dqrr.dqrr_size); ++ if (ret) { ++ kfree(p); ++ pr_err("qbman_swp_sys_init() failed %d\n", ret); ++ return NULL; ++ } ++ /* SDQCR needs to be initialized to 0 when no channels are ++ being dequeued from or else the QMan HW will indicate an ++ error. The values that were calculated above will be ++ applied when dequeues from a specific channel are enabled */ ++ qbman_cinh_write(&p->sys, QBMAN_CINH_SWP_SDQCR, 0); ++ return p; ++} ++ ++void qbman_swp_finish(struct qbman_swp *p) ++{ ++#ifdef QBMAN_CHECKING ++ BUG_ON(p->mc.check != swp_mc_can_start); ++#endif ++ qbman_swp_sys_finish(&p->sys); ++ kfree(p); ++} ++ ++const struct qbman_swp_desc *qbman_swp_get_desc(struct qbman_swp *p) ++{ ++ return p->desc; ++} ++ ++/**************/ ++/* Interrupts */ ++/**************/ ++ ++uint32_t qbman_swp_interrupt_get_vanish(struct qbman_swp *p) ++{ ++ return qbman_cinh_read(&p->sys, QBMAN_CINH_SWP_ISDR); ++} ++ ++void qbman_swp_interrupt_set_vanish(struct qbman_swp *p, uint32_t mask) ++{ ++ qbman_cinh_write(&p->sys, QBMAN_CINH_SWP_ISDR, mask); ++} ++ ++uint32_t qbman_swp_interrupt_read_status(struct qbman_swp *p) ++{ ++ return qbman_cinh_read(&p->sys, QBMAN_CINH_SWP_ISR); ++} ++ ++void qbman_swp_interrupt_clear_status(struct qbman_swp *p, uint32_t mask) ++{ ++ qbman_cinh_write(&p->sys, QBMAN_CINH_SWP_ISR, mask); ++} ++ ++uint32_t qbman_swp_interrupt_get_trigger(struct qbman_swp *p) ++{ ++ return qbman_cinh_read(&p->sys, QBMAN_CINH_SWP_IER); ++} ++ ++void qbman_swp_interrupt_set_trigger(struct qbman_swp *p, uint32_t mask) ++{ ++ qbman_cinh_write(&p->sys, QBMAN_CINH_SWP_IER, mask); ++} ++ ++int qbman_swp_interrupt_get_inhibit(struct qbman_swp *p) ++{ ++ return qbman_cinh_read(&p->sys, QBMAN_CINH_SWP_IIR); ++} ++ ++void qbman_swp_interrupt_set_inhibit(struct qbman_swp *p, int inhibit) ++{ ++ qbman_cinh_write(&p->sys, QBMAN_CINH_SWP_IIR, inhibit ? 0xffffffff : 0); ++} ++ ++/***********************/ ++/* Management commands */ ++/***********************/ ++ ++/* ++ * Internal code common to all types of management commands. ++ */ ++ ++void *qbman_swp_mc_start(struct qbman_swp *p) ++{ ++ void *ret; ++#ifdef QBMAN_CHECKING ++ BUG_ON(p->mc.check != swp_mc_can_start); ++#endif ++ ret = qbman_cena_write_start(&p->sys, QBMAN_CENA_SWP_CR); ++#ifdef QBMAN_CHECKING ++ if (!ret) ++ p->mc.check = swp_mc_can_submit; ++#endif ++ return ret; ++} ++ ++void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, uint32_t cmd_verb) ++{ ++ uint32_t *v = cmd; ++#ifdef QBMAN_CHECKING ++ BUG_ON(!p->mc.check != swp_mc_can_submit); ++#endif ++ /* TBD: "|=" is going to hurt performance. Need to move as many fields ++ * out of word zero, and for those that remain, the "OR" needs to occur ++ * at the caller side. This debug check helps to catch cases where the ++ * caller wants to OR but has forgotten to do so. */ ++ BUG_ON((*v & cmd_verb) != *v); ++ *v = cmd_verb | p->mc.valid_bit; ++ qbman_cena_write_complete(&p->sys, QBMAN_CENA_SWP_CR, cmd); ++#ifdef QBMAN_CHECKING ++ p->mc.check = swp_mc_can_poll; ++#endif ++} ++ ++void *qbman_swp_mc_result(struct qbman_swp *p) ++{ ++ uint32_t *ret, verb; ++#ifdef QBMAN_CHECKING ++ BUG_ON(p->mc.check != swp_mc_can_poll); ++#endif ++ qbman_cena_invalidate_prefetch(&p->sys, ++ QBMAN_CENA_SWP_RR(p->mc.valid_bit)); ++ ret = qbman_cena_read(&p->sys, QBMAN_CENA_SWP_RR(p->mc.valid_bit)); ++ /* Remove the valid-bit - command completed iff the rest is non-zero */ ++ verb = ret[0] & ~QB_VALID_BIT; ++ if (!verb) ++ return NULL; ++#ifdef QBMAN_CHECKING ++ p->mc.check = swp_mc_can_start; ++#endif ++ p->mc.valid_bit ^= QB_VALID_BIT; ++ return ret; ++} ++ ++/***********/ ++/* Enqueue */ ++/***********/ ++ ++/* These should be const, eventually */ ++static struct qb_attr_code code_eq_cmd = QB_CODE(0, 0, 2); ++static struct qb_attr_code code_eq_eqdi = QB_CODE(0, 3, 1); ++static struct qb_attr_code code_eq_dca_en = QB_CODE(0, 15, 1); ++static struct qb_attr_code code_eq_dca_pk = QB_CODE(0, 14, 1); ++static struct qb_attr_code code_eq_dca_idx = QB_CODE(0, 8, 2); ++static struct qb_attr_code code_eq_orp_en = QB_CODE(0, 2, 1); ++static struct qb_attr_code code_eq_orp_is_nesn = QB_CODE(0, 31, 1); ++static struct qb_attr_code code_eq_orp_nlis = QB_CODE(0, 30, 1); ++static struct qb_attr_code code_eq_orp_seqnum = QB_CODE(0, 16, 14); ++static struct qb_attr_code code_eq_opr_id = QB_CODE(1, 0, 16); ++static struct qb_attr_code code_eq_tgt_id = QB_CODE(2, 0, 24); ++/* static struct qb_attr_code code_eq_tag = QB_CODE(3, 0, 32); */ ++static struct qb_attr_code code_eq_qd_en = QB_CODE(0, 4, 1); ++static struct qb_attr_code code_eq_qd_bin = QB_CODE(4, 0, 16); ++static struct qb_attr_code code_eq_qd_pri = QB_CODE(4, 16, 4); ++static struct qb_attr_code code_eq_rsp_stash = QB_CODE(5, 16, 1); ++static struct qb_attr_code code_eq_rsp_id = QB_CODE(5, 24, 8); ++static struct qb_attr_code code_eq_rsp_lo = QB_CODE(6, 0, 32); ++ ++enum qbman_eq_cmd_e { ++ /* No enqueue, primarily for plugging ORP gaps for dropped frames */ ++ qbman_eq_cmd_empty, ++ /* DMA an enqueue response once complete */ ++ qbman_eq_cmd_respond, ++ /* DMA an enqueue response only if the enqueue fails */ ++ qbman_eq_cmd_respond_reject ++}; ++ ++void qbman_eq_desc_clear(struct qbman_eq_desc *d) ++{ ++ memset(d, 0, sizeof(*d)); ++} ++ ++void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_eq_orp_en, cl, 0); ++ qb_attr_code_encode(&code_eq_cmd, cl, ++ respond_success ? qbman_eq_cmd_respond : ++ qbman_eq_cmd_respond_reject); ++} ++ ++void qbman_eq_desc_set_orp(struct qbman_eq_desc *d, int respond_success, ++ uint32_t opr_id, uint32_t seqnum, int incomplete) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_eq_orp_en, cl, 1); ++ qb_attr_code_encode(&code_eq_cmd, cl, ++ respond_success ? qbman_eq_cmd_respond : ++ qbman_eq_cmd_respond_reject); ++ qb_attr_code_encode(&code_eq_opr_id, cl, opr_id); ++ qb_attr_code_encode(&code_eq_orp_seqnum, cl, seqnum); ++ qb_attr_code_encode(&code_eq_orp_nlis, cl, !!incomplete); ++} ++ ++void qbman_eq_desc_set_orp_hole(struct qbman_eq_desc *d, uint32_t opr_id, ++ uint32_t seqnum) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_eq_orp_en, cl, 1); ++ qb_attr_code_encode(&code_eq_cmd, cl, qbman_eq_cmd_empty); ++ qb_attr_code_encode(&code_eq_opr_id, cl, opr_id); ++ qb_attr_code_encode(&code_eq_orp_seqnum, cl, seqnum); ++ qb_attr_code_encode(&code_eq_orp_nlis, cl, 0); ++ qb_attr_code_encode(&code_eq_orp_is_nesn, cl, 0); ++} ++ ++void qbman_eq_desc_set_orp_nesn(struct qbman_eq_desc *d, uint32_t opr_id, ++ uint32_t seqnum) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_eq_orp_en, cl, 1); ++ qb_attr_code_encode(&code_eq_cmd, cl, qbman_eq_cmd_empty); ++ qb_attr_code_encode(&code_eq_opr_id, cl, opr_id); ++ qb_attr_code_encode(&code_eq_orp_seqnum, cl, seqnum); ++ qb_attr_code_encode(&code_eq_orp_nlis, cl, 0); ++ qb_attr_code_encode(&code_eq_orp_is_nesn, cl, 1); ++} ++ ++void qbman_eq_desc_set_response(struct qbman_eq_desc *d, ++ dma_addr_t storage_phys, ++ int stash) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode_64(&code_eq_rsp_lo, (uint64_t *)cl, storage_phys); ++ qb_attr_code_encode(&code_eq_rsp_stash, cl, !!stash); ++} ++ ++void qbman_eq_desc_set_token(struct qbman_eq_desc *d, uint8_t token) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_eq_rsp_id, cl, (uint32_t)token); ++} ++ ++void qbman_eq_desc_set_fq(struct qbman_eq_desc *d, uint32_t fqid) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_eq_qd_en, cl, 0); ++ qb_attr_code_encode(&code_eq_tgt_id, cl, fqid); ++} ++ ++void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, uint32_t qdid, ++ uint32_t qd_bin, uint32_t qd_prio) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_eq_qd_en, cl, 1); ++ qb_attr_code_encode(&code_eq_tgt_id, cl, qdid); ++ qb_attr_code_encode(&code_eq_qd_bin, cl, qd_bin); ++ qb_attr_code_encode(&code_eq_qd_pri, cl, qd_prio); ++} ++ ++void qbman_eq_desc_set_eqdi(struct qbman_eq_desc *d, int enable) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_eq_eqdi, cl, !!enable); ++} ++ ++void qbman_eq_desc_set_dca(struct qbman_eq_desc *d, int enable, ++ uint32_t dqrr_idx, int park) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_eq_dca_en, cl, !!enable); ++ if (enable) { ++ qb_attr_code_encode(&code_eq_dca_pk, cl, !!park); ++ qb_attr_code_encode(&code_eq_dca_idx, cl, dqrr_idx); ++ } ++} ++ ++#define EQAR_IDX(eqar) ((eqar) & 0x7) ++#define EQAR_VB(eqar) ((eqar) & 0x80) ++#define EQAR_SUCCESS(eqar) ((eqar) & 0x100) ++ ++int qbman_swp_enqueue(struct qbman_swp *s, const struct qbman_eq_desc *d, ++ const struct qbman_fd *fd) ++{ ++ uint32_t *p; ++ const uint32_t *cl = qb_cl(d); ++ uint32_t eqar = qbman_cinh_read(&s->sys, QBMAN_CINH_SWP_EQAR); ++ ++ pr_debug("EQAR=%08x\n", eqar); ++ if (!EQAR_SUCCESS(eqar)) ++ return -EBUSY; ++ p = qbman_cena_write_start(&s->sys, ++ QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar))); ++ word_copy(&p[1], &cl[1], 7); ++ word_copy(&p[8], fd, sizeof(*fd) >> 2); ++ /* Set the verb byte, have to substitute in the valid-bit */ ++ p[0] = cl[0] | EQAR_VB(eqar); ++ qbman_cena_write_complete(&s->sys, ++ QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar)), ++ p); ++ return 0; ++} ++ ++/*************************/ ++/* Static (push) dequeue */ ++/*************************/ ++ ++void qbman_swp_push_get(struct qbman_swp *s, uint8_t channel_idx, int *enabled) ++{ ++ struct qb_attr_code code = CODE_SDQCR_DQSRC(channel_idx); ++ ++ BUG_ON(channel_idx > 15); ++ *enabled = (int)qb_attr_code_decode(&code, &s->sdq); ++} ++ ++void qbman_swp_push_set(struct qbman_swp *s, uint8_t channel_idx, int enable) ++{ ++ uint16_t dqsrc; ++ struct qb_attr_code code = CODE_SDQCR_DQSRC(channel_idx); ++ ++ BUG_ON(channel_idx > 15); ++ qb_attr_code_encode(&code, &s->sdq, !!enable); ++ /* Read make the complete src map. If no channels are enabled ++ the SDQCR must be 0 or else QMan will assert errors */ ++ dqsrc = (uint16_t)qb_attr_code_decode(&code_sdqcr_dqsrc, &s->sdq); ++ if (dqsrc != 0) ++ qbman_cinh_write(&s->sys, QBMAN_CINH_SWP_SDQCR, s->sdq); ++ else ++ qbman_cinh_write(&s->sys, QBMAN_CINH_SWP_SDQCR, 0); ++} ++ ++/***************************/ ++/* Volatile (pull) dequeue */ ++/***************************/ ++ ++/* These should be const, eventually */ ++static struct qb_attr_code code_pull_dct = QB_CODE(0, 0, 2); ++static struct qb_attr_code code_pull_dt = QB_CODE(0, 2, 2); ++static struct qb_attr_code code_pull_rls = QB_CODE(0, 4, 1); ++static struct qb_attr_code code_pull_stash = QB_CODE(0, 5, 1); ++static struct qb_attr_code code_pull_numframes = QB_CODE(0, 8, 4); ++static struct qb_attr_code code_pull_token = QB_CODE(0, 16, 8); ++static struct qb_attr_code code_pull_dqsource = QB_CODE(1, 0, 24); ++static struct qb_attr_code code_pull_rsp_lo = QB_CODE(2, 0, 32); ++ ++enum qb_pull_dt_e { ++ qb_pull_dt_channel, ++ qb_pull_dt_workqueue, ++ qb_pull_dt_framequeue ++}; ++ ++void qbman_pull_desc_clear(struct qbman_pull_desc *d) ++{ ++ memset(d, 0, sizeof(*d)); ++} ++ ++void qbman_pull_desc_set_storage(struct qbman_pull_desc *d, ++ struct dpaa2_dq *storage, ++ dma_addr_t storage_phys, ++ int stash) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ /* Squiggle the pointer 'storage' into the extra 2 words of the ++ * descriptor (which aren't copied to the hw command) */ ++ *(void **)&cl[4] = storage; ++ if (!storage) { ++ qb_attr_code_encode(&code_pull_rls, cl, 0); ++ return; ++ } ++ qb_attr_code_encode(&code_pull_rls, cl, 1); ++ qb_attr_code_encode(&code_pull_stash, cl, !!stash); ++ qb_attr_code_encode_64(&code_pull_rsp_lo, (uint64_t *)cl, storage_phys); ++} ++ ++void qbman_pull_desc_set_numframes(struct qbman_pull_desc *d, uint8_t numframes) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ BUG_ON(!numframes || (numframes > 16)); ++ qb_attr_code_encode(&code_pull_numframes, cl, ++ (uint32_t)(numframes - 1)); ++} ++ ++void qbman_pull_desc_set_token(struct qbman_pull_desc *d, uint8_t token) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_pull_token, cl, token); ++} ++ ++void qbman_pull_desc_set_fq(struct qbman_pull_desc *d, uint32_t fqid) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_pull_dct, cl, 1); ++ qb_attr_code_encode(&code_pull_dt, cl, qb_pull_dt_framequeue); ++ qb_attr_code_encode(&code_pull_dqsource, cl, fqid); ++} ++ ++void qbman_pull_desc_set_wq(struct qbman_pull_desc *d, uint32_t wqid, ++ enum qbman_pull_type_e dct) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_pull_dct, cl, dct); ++ qb_attr_code_encode(&code_pull_dt, cl, qb_pull_dt_workqueue); ++ qb_attr_code_encode(&code_pull_dqsource, cl, wqid); ++} ++ ++void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, uint32_t chid, ++ enum qbman_pull_type_e dct) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_pull_dct, cl, dct); ++ qb_attr_code_encode(&code_pull_dt, cl, qb_pull_dt_channel); ++ qb_attr_code_encode(&code_pull_dqsource, cl, chid); ++} ++ ++int qbman_swp_pull(struct qbman_swp *s, struct qbman_pull_desc *d) ++{ ++ uint32_t *p; ++ uint32_t *cl = qb_cl(d); ++ ++ if (!atomic_dec_and_test(&s->vdq.busy)) { ++ atomic_inc(&s->vdq.busy); ++ return -EBUSY; ++ } ++ s->vdq.storage = *(void **)&cl[4]; ++ qb_attr_code_encode(&code_pull_token, cl, 1); ++ p = qbman_cena_write_start(&s->sys, QBMAN_CENA_SWP_VDQCR); ++ word_copy(&p[1], &cl[1], 3); ++ /* Set the verb byte, have to substitute in the valid-bit */ ++ p[0] = cl[0] | s->vdq.valid_bit; ++ s->vdq.valid_bit ^= QB_VALID_BIT; ++ qbman_cena_write_complete(&s->sys, QBMAN_CENA_SWP_VDQCR, p); ++ return 0; ++} ++ ++/****************/ ++/* Polling DQRR */ ++/****************/ ++ ++static struct qb_attr_code code_dqrr_verb = QB_CODE(0, 0, 8); ++static struct qb_attr_code code_dqrr_response = QB_CODE(0, 0, 7); ++static struct qb_attr_code code_dqrr_stat = QB_CODE(0, 8, 8); ++static struct qb_attr_code code_dqrr_seqnum = QB_CODE(0, 16, 14); ++static struct qb_attr_code code_dqrr_odpid = QB_CODE(1, 0, 16); ++/* static struct qb_attr_code code_dqrr_tok = QB_CODE(1, 24, 8); */ ++static struct qb_attr_code code_dqrr_fqid = QB_CODE(2, 0, 24); ++static struct qb_attr_code code_dqrr_byte_count = QB_CODE(4, 0, 32); ++static struct qb_attr_code code_dqrr_frame_count = QB_CODE(5, 0, 24); ++static struct qb_attr_code code_dqrr_ctx_lo = QB_CODE(6, 0, 32); ++ ++#define QBMAN_RESULT_DQ 0x60 ++#define QBMAN_RESULT_FQRN 0x21 ++#define QBMAN_RESULT_FQRNI 0x22 ++#define QBMAN_RESULT_FQPN 0x24 ++#define QBMAN_RESULT_FQDAN 0x25 ++#define QBMAN_RESULT_CDAN 0x26 ++#define QBMAN_RESULT_CSCN_MEM 0x27 ++#define QBMAN_RESULT_CGCU 0x28 ++#define QBMAN_RESULT_BPSCN 0x29 ++#define QBMAN_RESULT_CSCN_WQ 0x2a ++ ++static struct qb_attr_code code_dqpi_pi = QB_CODE(0, 0, 4); ++ ++/* NULL return if there are no unconsumed DQRR entries. Returns a DQRR entry ++ * only once, so repeated calls can return a sequence of DQRR entries, without ++ * requiring they be consumed immediately or in any particular order. */ ++const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s) ++{ ++ uint32_t verb; ++ uint32_t response_verb; ++ uint32_t flags; ++ const struct dpaa2_dq *dq; ++ const uint32_t *p; ++ ++ /* Before using valid-bit to detect if something is there, we have to ++ * handle the case of the DQRR reset bug... */ ++#ifdef WORKAROUND_DQRR_RESET_BUG ++ if (unlikely(s->dqrr.reset_bug)) { ++ /* We pick up new entries by cache-inhibited producer index, ++ * which means that a non-coherent mapping would require us to ++ * invalidate and read *only* once that PI has indicated that ++ * there's an entry here. The first trip around the DQRR ring ++ * will be much less efficient than all subsequent trips around ++ * it... ++ */ ++ uint32_t dqpi = qbman_cinh_read(&s->sys, QBMAN_CINH_SWP_DQPI); ++ uint32_t pi = qb_attr_code_decode(&code_dqpi_pi, &dqpi); ++ /* there are new entries iff pi != next_idx */ ++ if (pi == s->dqrr.next_idx) ++ return NULL; ++ /* if next_idx is/was the last ring index, and 'pi' is ++ * different, we can disable the workaround as all the ring ++ * entries have now been DMA'd to so valid-bit checking is ++ * repaired. Note: this logic needs to be based on next_idx ++ * (which increments one at a time), rather than on pi (which ++ * can burst and wrap-around between our snapshots of it). ++ */ ++ if (s->dqrr.next_idx == (s->dqrr.dqrr_size - 1)) { ++ pr_debug("DEBUG: next_idx=%d, pi=%d, clear reset bug\n", ++ s->dqrr.next_idx, pi); ++ s->dqrr.reset_bug = 0; ++ } ++ qbman_cena_invalidate_prefetch(&s->sys, ++ QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); ++ } ++#endif ++ ++ dq = qbman_cena_read(&s->sys, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); ++ p = qb_cl(dq); ++ verb = qb_attr_code_decode(&code_dqrr_verb, p); ++ ++ /* If the valid-bit isn't of the expected polarity, nothing there. Note, ++ * in the DQRR reset bug workaround, we shouldn't need to skip these ++ * check, because we've already determined that a new entry is available ++ * and we've invalidated the cacheline before reading it, so the ++ * valid-bit behaviour is repaired and should tell us what we already ++ * knew from reading PI. ++ */ ++ if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) { ++ qbman_cena_invalidate_prefetch(&s->sys, ++ QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); ++ return NULL; ++ } ++ /* There's something there. Move "next_idx" attention to the next ring ++ * entry (and prefetch it) before returning what we found. */ ++ s->dqrr.next_idx++; ++ s->dqrr.next_idx &= s->dqrr.dqrr_size - 1; /* Wrap around */ ++ /* TODO: it's possible to do all this without conditionals, optimise it ++ * later. */ ++ if (!s->dqrr.next_idx) ++ s->dqrr.valid_bit ^= QB_VALID_BIT; ++ ++ /* If this is the final response to a volatile dequeue command ++ indicate that the vdq is no longer busy */ ++ flags = dpaa2_dq_flags(dq); ++ response_verb = qb_attr_code_decode(&code_dqrr_response, &verb); ++ if ((response_verb == QBMAN_RESULT_DQ) && ++ (flags & DPAA2_DQ_STAT_VOLATILE) && ++ (flags & DPAA2_DQ_STAT_EXPIRED)) ++ atomic_inc(&s->vdq.busy); ++ ++ qbman_cena_invalidate_prefetch(&s->sys, ++ QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)); ++ return dq; ++} ++ ++/* Consume DQRR entries previously returned from qbman_swp_dqrr_next(). */ ++void qbman_swp_dqrr_consume(struct qbman_swp *s, const struct dpaa2_dq *dq) ++{ ++ qbman_cinh_write(&s->sys, QBMAN_CINH_SWP_DCAP, QBMAN_IDX_FROM_DQRR(dq)); ++} ++ ++/*********************************/ ++/* Polling user-provided storage */ ++/*********************************/ ++ ++int qbman_result_has_new_result(struct qbman_swp *s, ++ const struct dpaa2_dq *dq) ++{ ++ /* To avoid converting the little-endian DQ entry to host-endian prior ++ * to us knowing whether there is a valid entry or not (and run the ++ * risk of corrupting the incoming hardware LE write), we detect in ++ * hardware endianness rather than host. This means we need a different ++ * "code" depending on whether we are BE or LE in software, which is ++ * where DQRR_TOK_OFFSET comes in... */ ++ static struct qb_attr_code code_dqrr_tok_detect = ++ QB_CODE(0, DQRR_TOK_OFFSET, 8); ++ /* The user trying to poll for a result treats "dq" as const. It is ++ * however the same address that was provided to us non-const in the ++ * first place, for directing hardware DMA to. So we can cast away the ++ * const because it is mutable from our perspective. */ ++ uint32_t *p = qb_cl((struct dpaa2_dq *)dq); ++ uint32_t token; ++ ++ token = qb_attr_code_decode(&code_dqrr_tok_detect, &p[1]); ++ if (token != 1) ++ return 0; ++ qb_attr_code_encode(&code_dqrr_tok_detect, &p[1], 0); ++ ++ /* Only now do we convert from hardware to host endianness. Also, as we ++ * are returning success, the user has promised not to call us again, so ++ * there's no risk of us converting the endianness twice... */ ++ make_le32_n(p, 16); ++ ++ /* VDQCR "no longer busy" hook - not quite the same as DQRR, because the ++ * fact "VDQCR" shows busy doesn't mean that the result we're looking at ++ * is from the same command. Eg. we may be looking at our 10th dequeue ++ * result from our first VDQCR command, yet the second dequeue command ++ * could have been kicked off already, after seeing the 1st result. Ie. ++ * the result we're looking at is not necessarily proof that we can ++ * reset "busy". We instead base the decision on whether the current ++ * result is sitting at the first 'storage' location of the busy ++ * command. */ ++ if (s->vdq.storage == dq) { ++ s->vdq.storage = NULL; ++ atomic_inc(&s->vdq.busy); ++ } ++ return 1; ++} ++ ++/********************************/ ++/* Categorising qbman_result */ ++/********************************/ ++ ++static struct qb_attr_code code_result_in_mem = ++ QB_CODE(0, QBMAN_RESULT_VERB_OFFSET_IN_MEM, 7); ++ ++static inline int __qbman_result_is_x(const struct dpaa2_dq *dq, uint32_t x) ++{ ++ const uint32_t *p = qb_cl(dq); ++ uint32_t response_verb = qb_attr_code_decode(&code_dqrr_response, p); ++ ++ return response_verb == x; ++} ++ ++static inline int __qbman_result_is_x_in_mem(const struct dpaa2_dq *dq, ++ uint32_t x) ++{ ++ const uint32_t *p = qb_cl(dq); ++ uint32_t response_verb = qb_attr_code_decode(&code_result_in_mem, p); ++ ++ return (response_verb == x); ++} ++ ++int qbman_result_is_DQ(const struct dpaa2_dq *dq) ++{ ++ return __qbman_result_is_x(dq, QBMAN_RESULT_DQ); ++} ++ ++int qbman_result_is_FQDAN(const struct dpaa2_dq *dq) ++{ ++ return __qbman_result_is_x(dq, QBMAN_RESULT_FQDAN); ++} ++ ++int qbman_result_is_CDAN(const struct dpaa2_dq *dq) ++{ ++ return __qbman_result_is_x(dq, QBMAN_RESULT_CDAN); ++} ++ ++int qbman_result_is_CSCN(const struct dpaa2_dq *dq) ++{ ++ return __qbman_result_is_x_in_mem(dq, QBMAN_RESULT_CSCN_MEM) || ++ __qbman_result_is_x(dq, QBMAN_RESULT_CSCN_WQ); ++} ++ ++int qbman_result_is_BPSCN(const struct dpaa2_dq *dq) ++{ ++ return __qbman_result_is_x_in_mem(dq, QBMAN_RESULT_BPSCN); ++} ++ ++int qbman_result_is_CGCU(const struct dpaa2_dq *dq) ++{ ++ return __qbman_result_is_x_in_mem(dq, QBMAN_RESULT_CGCU); ++} ++ ++int qbman_result_is_FQRN(const struct dpaa2_dq *dq) ++{ ++ return __qbman_result_is_x_in_mem(dq, QBMAN_RESULT_FQRN); ++} ++ ++int qbman_result_is_FQRNI(const struct dpaa2_dq *dq) ++{ ++ return __qbman_result_is_x_in_mem(dq, QBMAN_RESULT_FQRNI); ++} ++ ++int qbman_result_is_FQPN(const struct dpaa2_dq *dq) ++{ ++ return __qbman_result_is_x(dq, QBMAN_RESULT_FQPN); ++} ++ ++/*********************************/ ++/* Parsing frame dequeue results */ ++/*********************************/ ++ ++/* These APIs assume qbman_result_is_DQ() is TRUE */ ++ ++uint32_t dpaa2_dq_flags(const struct dpaa2_dq *dq) ++{ ++ const uint32_t *p = qb_cl(dq); ++ ++ return qb_attr_code_decode(&code_dqrr_stat, p); ++} ++ ++uint16_t dpaa2_dq_seqnum(const struct dpaa2_dq *dq) ++{ ++ const uint32_t *p = qb_cl(dq); ++ ++ return (uint16_t)qb_attr_code_decode(&code_dqrr_seqnum, p); ++} ++ ++uint16_t dpaa2_dq_odpid(const struct dpaa2_dq *dq) ++{ ++ const uint32_t *p = qb_cl(dq); ++ ++ return (uint16_t)qb_attr_code_decode(&code_dqrr_odpid, p); ++} ++ ++uint32_t dpaa2_dq_fqid(const struct dpaa2_dq *dq) ++{ ++ const uint32_t *p = qb_cl(dq); ++ ++ return qb_attr_code_decode(&code_dqrr_fqid, p); ++} ++ ++uint32_t dpaa2_dq_byte_count(const struct dpaa2_dq *dq) ++{ ++ const uint32_t *p = qb_cl(dq); ++ ++ return qb_attr_code_decode(&code_dqrr_byte_count, p); ++} ++ ++uint32_t dpaa2_dq_frame_count(const struct dpaa2_dq *dq) ++{ ++ const uint32_t *p = qb_cl(dq); ++ ++ return qb_attr_code_decode(&code_dqrr_frame_count, p); ++} ++ ++uint64_t dpaa2_dq_fqd_ctx(const struct dpaa2_dq *dq) ++{ ++ const uint64_t *p = (uint64_t *)qb_cl(dq); ++ ++ return qb_attr_code_decode_64(&code_dqrr_ctx_lo, p); ++} ++EXPORT_SYMBOL(dpaa2_dq_fqd_ctx); ++ ++const struct dpaa2_fd *dpaa2_dq_fd(const struct dpaa2_dq *dq) ++{ ++ const uint32_t *p = qb_cl(dq); ++ ++ return (const struct dpaa2_fd *)&p[8]; ++} ++EXPORT_SYMBOL(dpaa2_dq_fd); ++ ++/**************************************/ ++/* Parsing state-change notifications */ ++/**************************************/ ++ ++static struct qb_attr_code code_scn_state = QB_CODE(0, 16, 8); ++static struct qb_attr_code code_scn_rid = QB_CODE(1, 0, 24); ++static struct qb_attr_code code_scn_state_in_mem = ++ QB_CODE(0, SCN_STATE_OFFSET_IN_MEM, 8); ++static struct qb_attr_code code_scn_rid_in_mem = ++ QB_CODE(1, SCN_RID_OFFSET_IN_MEM, 24); ++static struct qb_attr_code code_scn_ctx_lo = QB_CODE(2, 0, 32); ++ ++uint8_t qbman_result_SCN_state(const struct dpaa2_dq *scn) ++{ ++ const uint32_t *p = qb_cl(scn); ++ ++ return (uint8_t)qb_attr_code_decode(&code_scn_state, p); ++} ++ ++uint32_t qbman_result_SCN_rid(const struct dpaa2_dq *scn) ++{ ++ const uint32_t *p = qb_cl(scn); ++ ++ return qb_attr_code_decode(&code_scn_rid, p); ++} ++ ++uint64_t qbman_result_SCN_ctx(const struct dpaa2_dq *scn) ++{ ++ const uint64_t *p = (uint64_t *)qb_cl(scn); ++ ++ return qb_attr_code_decode_64(&code_scn_ctx_lo, p); ++} ++ ++uint8_t qbman_result_SCN_state_in_mem(const struct dpaa2_dq *scn) ++{ ++ const uint32_t *p = qb_cl(scn); ++ ++ return (uint8_t)qb_attr_code_decode(&code_scn_state_in_mem, p); ++} ++ ++uint32_t qbman_result_SCN_rid_in_mem(const struct dpaa2_dq *scn) ++{ ++ const uint32_t *p = qb_cl(scn); ++ uint32_t result_rid; ++ ++ result_rid = qb_attr_code_decode(&code_scn_rid_in_mem, p); ++ return make_le24(result_rid); ++} ++ ++/*****************/ ++/* Parsing BPSCN */ ++/*****************/ ++uint16_t qbman_result_bpscn_bpid(const struct dpaa2_dq *scn) ++{ ++ return (uint16_t)qbman_result_SCN_rid_in_mem(scn) & 0x3FFF; ++} ++ ++int qbman_result_bpscn_has_free_bufs(const struct dpaa2_dq *scn) ++{ ++ return !(int)(qbman_result_SCN_state_in_mem(scn) & 0x1); ++} ++ ++int qbman_result_bpscn_is_depleted(const struct dpaa2_dq *scn) ++{ ++ return (int)(qbman_result_SCN_state_in_mem(scn) & 0x2); ++} ++ ++int qbman_result_bpscn_is_surplus(const struct dpaa2_dq *scn) ++{ ++ return (int)(qbman_result_SCN_state_in_mem(scn) & 0x4); ++} ++ ++uint64_t qbman_result_bpscn_ctx(const struct dpaa2_dq *scn) ++{ ++ return qbman_result_SCN_ctx(scn); ++} ++ ++/*****************/ ++/* Parsing CGCU */ ++/*****************/ ++uint16_t qbman_result_cgcu_cgid(const struct dpaa2_dq *scn) ++{ ++ return (uint16_t)qbman_result_SCN_rid_in_mem(scn) & 0xFFFF; ++} ++ ++uint64_t qbman_result_cgcu_icnt(const struct dpaa2_dq *scn) ++{ ++ return qbman_result_SCN_ctx(scn) & 0xFFFFFFFFFF; ++} ++ ++/******************/ ++/* Buffer release */ ++/******************/ ++ ++/* These should be const, eventually */ ++/* static struct qb_attr_code code_release_num = QB_CODE(0, 0, 3); */ ++static struct qb_attr_code code_release_set_me = QB_CODE(0, 5, 1); ++static struct qb_attr_code code_release_rcdi = QB_CODE(0, 6, 1); ++static struct qb_attr_code code_release_bpid = QB_CODE(0, 16, 16); ++ ++void qbman_release_desc_clear(struct qbman_release_desc *d) ++{ ++ uint32_t *cl; ++ ++ memset(d, 0, sizeof(*d)); ++ cl = qb_cl(d); ++ qb_attr_code_encode(&code_release_set_me, cl, 1); ++} ++ ++void qbman_release_desc_set_bpid(struct qbman_release_desc *d, uint32_t bpid) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_release_bpid, cl, bpid); ++} ++ ++void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable) ++{ ++ uint32_t *cl = qb_cl(d); ++ ++ qb_attr_code_encode(&code_release_rcdi, cl, !!enable); ++} ++ ++#define RAR_IDX(rar) ((rar) & 0x7) ++#define RAR_VB(rar) ((rar) & 0x80) ++#define RAR_SUCCESS(rar) ((rar) & 0x100) ++ ++int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d, ++ const uint64_t *buffers, unsigned int num_buffers) ++{ ++ uint32_t *p; ++ const uint32_t *cl = qb_cl(d); ++ uint32_t rar = qbman_cinh_read(&s->sys, QBMAN_CINH_SWP_RAR); ++ ++ pr_debug("RAR=%08x\n", rar); ++ if (!RAR_SUCCESS(rar)) ++ return -EBUSY; ++ BUG_ON(!num_buffers || (num_buffers > 7)); ++ /* Start the release command */ ++ p = qbman_cena_write_start(&s->sys, ++ QBMAN_CENA_SWP_RCR(RAR_IDX(rar))); ++ /* Copy the caller's buffer pointers to the command */ ++ u64_to_le32_copy(&p[2], buffers, num_buffers); ++ /* Set the verb byte, have to substitute in the valid-bit and the number ++ * of buffers. */ ++ p[0] = cl[0] | RAR_VB(rar) | num_buffers; ++ qbman_cena_write_complete(&s->sys, ++ QBMAN_CENA_SWP_RCR(RAR_IDX(rar)), ++ p); ++ return 0; ++} ++ ++/*******************/ ++/* Buffer acquires */ ++/*******************/ ++ ++/* These should be const, eventually */ ++static struct qb_attr_code code_acquire_bpid = QB_CODE(0, 16, 16); ++static struct qb_attr_code code_acquire_num = QB_CODE(1, 0, 3); ++static struct qb_attr_code code_acquire_r_num = QB_CODE(1, 0, 3); ++ ++int qbman_swp_acquire(struct qbman_swp *s, uint32_t bpid, uint64_t *buffers, ++ unsigned int num_buffers) ++{ ++ uint32_t *p; ++ uint32_t verb, rslt, num; ++ ++ BUG_ON(!num_buffers || (num_buffers > 7)); ++ ++ /* Start the management command */ ++ p = qbman_swp_mc_start(s); ++ ++ if (!p) ++ return -EBUSY; ++ ++ /* Encode the caller-provided attributes */ ++ qb_attr_code_encode(&code_acquire_bpid, p, bpid); ++ qb_attr_code_encode(&code_acquire_num, p, num_buffers); ++ ++ /* Complete the management command */ ++ p = qbman_swp_mc_complete(s, p, p[0] | QBMAN_MC_ACQUIRE); ++ ++ /* Decode the outcome */ ++ verb = qb_attr_code_decode(&code_generic_verb, p); ++ rslt = qb_attr_code_decode(&code_generic_rslt, p); ++ num = qb_attr_code_decode(&code_acquire_r_num, p); ++ BUG_ON(verb != QBMAN_MC_ACQUIRE); ++ ++ /* Determine success or failure */ ++ if (unlikely(rslt != QBMAN_MC_RSLT_OK)) { ++ pr_err("Acquire buffers from BPID 0x%x failed, code=0x%02x\n", ++ bpid, rslt); ++ return -EIO; ++ } ++ BUG_ON(num > num_buffers); ++ /* Copy the acquired buffers to the caller's array */ ++ u64_from_le32_copy(buffers, &p[2], num); ++ return (int)num; ++} ++ ++/*****************/ ++/* FQ management */ ++/*****************/ ++ ++static struct qb_attr_code code_fqalt_fqid = QB_CODE(1, 0, 32); ++ ++static int qbman_swp_alt_fq_state(struct qbman_swp *s, uint32_t fqid, ++ uint8_t alt_fq_verb) ++{ ++ uint32_t *p; ++ uint32_t verb, rslt; ++ ++ /* Start the management command */ ++ p = qbman_swp_mc_start(s); ++ if (!p) ++ return -EBUSY; ++ ++ qb_attr_code_encode(&code_fqalt_fqid, p, fqid); ++ /* Complete the management command */ ++ p = qbman_swp_mc_complete(s, p, p[0] | alt_fq_verb); ++ ++ /* Decode the outcome */ ++ verb = qb_attr_code_decode(&code_generic_verb, p); ++ rslt = qb_attr_code_decode(&code_generic_rslt, p); ++ BUG_ON(verb != alt_fq_verb); ++ ++ /* Determine success or failure */ ++ if (unlikely(rslt != QBMAN_MC_RSLT_OK)) { ++ pr_err("ALT FQID %d failed: verb = 0x%08x, code = 0x%02x\n", ++ fqid, alt_fq_verb, rslt); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++int qbman_swp_fq_schedule(struct qbman_swp *s, uint32_t fqid) ++{ ++ return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_SCHEDULE); ++} ++ ++int qbman_swp_fq_force(struct qbman_swp *s, uint32_t fqid) ++{ ++ return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_FORCE); ++} ++ ++int qbman_swp_fq_xon(struct qbman_swp *s, uint32_t fqid) ++{ ++ return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_XON); ++} ++ ++int qbman_swp_fq_xoff(struct qbman_swp *s, uint32_t fqid) ++{ ++ return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_XOFF); ++} ++ ++/**********************/ ++/* Channel management */ ++/**********************/ ++ ++static struct qb_attr_code code_cdan_cid = QB_CODE(0, 16, 12); ++static struct qb_attr_code code_cdan_we = QB_CODE(1, 0, 8); ++static struct qb_attr_code code_cdan_en = QB_CODE(1, 8, 1); ++static struct qb_attr_code code_cdan_ctx_lo = QB_CODE(2, 0, 32); ++ ++/* Hide "ICD" for now as we don't use it, don't set it, and don't test it, so it ++ * would be irresponsible to expose it. */ ++#define CODE_CDAN_WE_EN 0x1 ++#define CODE_CDAN_WE_CTX 0x4 ++ ++static int qbman_swp_CDAN_set(struct qbman_swp *s, uint16_t channelid, ++ uint8_t we_mask, uint8_t cdan_en, ++ uint64_t ctx) ++{ ++ uint32_t *p; ++ uint32_t verb, rslt; ++ ++ /* Start the management command */ ++ p = qbman_swp_mc_start(s); ++ if (!p) ++ return -EBUSY; ++ ++ /* Encode the caller-provided attributes */ ++ qb_attr_code_encode(&code_cdan_cid, p, channelid); ++ qb_attr_code_encode(&code_cdan_we, p, we_mask); ++ qb_attr_code_encode(&code_cdan_en, p, cdan_en); ++ qb_attr_code_encode_64(&code_cdan_ctx_lo, (uint64_t *)p, ctx); ++ /* Complete the management command */ ++ p = qbman_swp_mc_complete(s, p, p[0] | QBMAN_WQCHAN_CONFIGURE); ++ ++ /* Decode the outcome */ ++ verb = qb_attr_code_decode(&code_generic_verb, p); ++ rslt = qb_attr_code_decode(&code_generic_rslt, p); ++ BUG_ON(verb != QBMAN_WQCHAN_CONFIGURE); ++ ++ /* Determine success or failure */ ++ if (unlikely(rslt != QBMAN_MC_RSLT_OK)) { ++ pr_err("CDAN cQID %d failed: code = 0x%02x\n", ++ channelid, rslt); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++int qbman_swp_CDAN_set_context(struct qbman_swp *s, uint16_t channelid, ++ uint64_t ctx) ++{ ++ return qbman_swp_CDAN_set(s, channelid, ++ CODE_CDAN_WE_CTX, ++ 0, ctx); ++} ++ ++int qbman_swp_CDAN_enable(struct qbman_swp *s, uint16_t channelid) ++{ ++ return qbman_swp_CDAN_set(s, channelid, ++ CODE_CDAN_WE_EN, ++ 1, 0); ++} ++int qbman_swp_CDAN_disable(struct qbman_swp *s, uint16_t channelid) ++{ ++ return qbman_swp_CDAN_set(s, channelid, ++ CODE_CDAN_WE_EN, ++ 0, 0); ++} ++int qbman_swp_CDAN_set_context_enable(struct qbman_swp *s, uint16_t channelid, ++ uint64_t ctx) ++{ ++ return qbman_swp_CDAN_set(s, channelid, ++ CODE_CDAN_WE_EN | CODE_CDAN_WE_CTX, ++ 1, ctx); ++} +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/qbman_portal.h +@@ -0,0 +1,261 @@ ++/* Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include "qbman_private.h" ++#include "fsl_qbman_portal.h" ++#include "../../include/fsl_dpaa2_fd.h" ++ ++/* All QBMan command and result structures use this "valid bit" encoding */ ++#define QB_VALID_BIT ((uint32_t)0x80) ++ ++/* Management command result codes */ ++#define QBMAN_MC_RSLT_OK 0xf0 ++ ++/* TBD: as of QBMan 4.1, DQRR will be 8 rather than 4! */ ++#define QBMAN_DQRR_SIZE 4 ++ ++/* DQRR valid-bit reset bug. See qbman_portal.c::qbman_swp_init(). */ ++#define WORKAROUND_DQRR_RESET_BUG ++ ++/* --------------------- */ ++/* portal data structure */ ++/* --------------------- */ ++ ++struct qbman_swp { ++ const struct qbman_swp_desc *desc; ++ /* The qbman_sys (ie. arch/OS-specific) support code can put anything it ++ * needs in here. */ ++ struct qbman_swp_sys sys; ++ /* Management commands */ ++ struct { ++#ifdef QBMAN_CHECKING ++ enum swp_mc_check { ++ swp_mc_can_start, /* call __qbman_swp_mc_start() */ ++ swp_mc_can_submit, /* call __qbman_swp_mc_submit() */ ++ swp_mc_can_poll, /* call __qbman_swp_mc_result() */ ++ } check; ++#endif ++ uint32_t valid_bit; /* 0x00 or 0x80 */ ++ } mc; ++ /* Push dequeues */ ++ uint32_t sdq; ++ /* Volatile dequeues */ ++ struct { ++ /* VDQCR supports a "1 deep pipeline", meaning that if you know ++ * the last-submitted command is already executing in the ++ * hardware (as evidenced by at least 1 valid dequeue result), ++ * you can write another dequeue command to the register, the ++ * hardware will start executing it as soon as the ++ * already-executing command terminates. (This minimises latency ++ * and stalls.) With that in mind, this "busy" variable refers ++ * to whether or not a command can be submitted, not whether or ++ * not a previously-submitted command is still executing. In ++ * other words, once proof is seen that the previously-submitted ++ * command is executing, "vdq" is no longer "busy". ++ */ ++ atomic_t busy; ++ uint32_t valid_bit; /* 0x00 or 0x80 */ ++ /* We need to determine when vdq is no longer busy. This depends ++ * on whether the "busy" (last-submitted) dequeue command is ++ * targeting DQRR or main-memory, and detected is based on the ++ * presence of the dequeue command's "token" showing up in ++ * dequeue entries in DQRR or main-memory (respectively). */ ++ struct dpaa2_dq *storage; /* NULL if DQRR */ ++ } vdq; ++ /* DQRR */ ++ struct { ++ uint32_t next_idx; ++ uint32_t valid_bit; ++ uint8_t dqrr_size; ++#ifdef WORKAROUND_DQRR_RESET_BUG ++ int reset_bug; ++#endif ++ } dqrr; ++}; ++ ++/* -------------------------- */ ++/* portal management commands */ ++/* -------------------------- */ ++ ++/* Different management commands all use this common base layer of code to issue ++ * commands and poll for results. The first function returns a pointer to where ++ * the caller should fill in their MC command (though they should ignore the ++ * verb byte), the second function commits merges in the caller-supplied command ++ * verb (which should not include the valid-bit) and submits the command to ++ * hardware, and the third function checks for a completed response (returns ++ * non-NULL if only if the response is complete). */ ++void *qbman_swp_mc_start(struct qbman_swp *p); ++void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, uint32_t cmd_verb); ++void *qbman_swp_mc_result(struct qbman_swp *p); ++ ++/* Wraps up submit + poll-for-result */ ++static inline void *qbman_swp_mc_complete(struct qbman_swp *swp, void *cmd, ++ uint32_t cmd_verb) ++{ ++ int loopvar; ++ ++ qbman_swp_mc_submit(swp, cmd, cmd_verb); ++ DBG_POLL_START(loopvar); ++ do { ++ DBG_POLL_CHECK(loopvar); ++ cmd = qbman_swp_mc_result(swp); ++ } while (!cmd); ++ return cmd; ++} ++ ++/* ------------ */ ++/* qb_attr_code */ ++/* ------------ */ ++ ++/* This struct locates a sub-field within a QBMan portal (CENA) cacheline which ++ * is either serving as a configuration command or a query result. The ++ * representation is inherently little-endian, as the indexing of the words is ++ * itself little-endian in nature and layerscape is little endian for anything ++ * that crosses a word boundary too (64-bit fields are the obvious examples). ++ */ ++struct qb_attr_code { ++ unsigned int word; /* which uint32_t[] array member encodes the field */ ++ unsigned int lsoffset; /* encoding offset from ls-bit */ ++ unsigned int width; /* encoding width. (bool must be 1.) */ ++}; ++ ++/* Some pre-defined codes */ ++extern struct qb_attr_code code_generic_verb; ++extern struct qb_attr_code code_generic_rslt; ++ ++/* Macros to define codes */ ++#define QB_CODE(a, b, c) { a, b, c} ++#define QB_CODE_NULL \ ++ QB_CODE((unsigned int)-1, (unsigned int)-1, (unsigned int)-1) ++ ++/* Rotate a code "ms", meaning that it moves from less-significant bytes to ++ * more-significant, from less-significant words to more-significant, etc. The ++ * "ls" version does the inverse, from more-significant towards ++ * less-significant. ++ */ ++static inline void qb_attr_code_rotate_ms(struct qb_attr_code *code, ++ unsigned int bits) ++{ ++ code->lsoffset += bits; ++ while (code->lsoffset > 31) { ++ code->word++; ++ code->lsoffset -= 32; ++ } ++} ++static inline void qb_attr_code_rotate_ls(struct qb_attr_code *code, ++ unsigned int bits) ++{ ++ /* Don't be fooled, this trick should work because the types are ++ * unsigned. So the case that interests the while loop (the rotate has ++ * gone too far and the word count needs to compensate for it), is ++ * manifested when lsoffset is negative. But that equates to a really ++ * large unsigned value, starting with lots of "F"s. As such, we can ++ * continue adding 32 back to it until it wraps back round above zero, ++ * to a value of 31 or less... ++ */ ++ code->lsoffset -= bits; ++ while (code->lsoffset > 31) { ++ code->word--; ++ code->lsoffset += 32; ++ } ++} ++/* Implement a loop of code rotations until 'expr' evaluates to FALSE (0). */ ++#define qb_attr_code_for_ms(code, bits, expr) \ ++ for (; expr; qb_attr_code_rotate_ms(code, bits)) ++#define qb_attr_code_for_ls(code, bits, expr) \ ++ for (; expr; qb_attr_code_rotate_ls(code, bits)) ++ ++/* decode a field from a cacheline */ ++static inline uint32_t qb_attr_code_decode(const struct qb_attr_code *code, ++ const uint32_t *cacheline) ++{ ++ return d32_uint32_t(code->lsoffset, code->width, cacheline[code->word]); ++} ++static inline uint64_t qb_attr_code_decode_64(const struct qb_attr_code *code, ++ const uint64_t *cacheline) ++{ ++ uint64_t res; ++ u64_from_le32_copy(&res, &cacheline[code->word/2], 1); ++ return res; ++} ++ ++/* encode a field to a cacheline */ ++static inline void qb_attr_code_encode(const struct qb_attr_code *code, ++ uint32_t *cacheline, uint32_t val) ++{ ++ cacheline[code->word] = ++ r32_uint32_t(code->lsoffset, code->width, cacheline[code->word]) ++ | e32_uint32_t(code->lsoffset, code->width, val); ++} ++static inline void qb_attr_code_encode_64(const struct qb_attr_code *code, ++ uint64_t *cacheline, uint64_t val) ++{ ++ u64_to_le32_copy(&cacheline[code->word/2], &val, 1); ++} ++ ++/* Small-width signed values (two's-complement) will decode into medium-width ++ * positives. (Eg. for an 8-bit signed field, which stores values from -128 to ++ * +127, a setting of -7 would appear to decode to the 32-bit unsigned value ++ * 249. Likewise -120 would decode as 136.) This function allows the caller to ++ * "re-sign" such fields to 32-bit signed. (Eg. -7, which was 249 with an 8-bit ++ * encoding, will become 0xfffffff9 if you cast the return value to uint32_t). ++ */ ++static inline int32_t qb_attr_code_makesigned(const struct qb_attr_code *code, ++ uint32_t val) ++{ ++ BUG_ON(val >= (1 << code->width)); ++ /* If the high bit was set, it was encoding a negative */ ++ if (val >= (1 << (code->width - 1))) ++ return (int32_t)0 - (int32_t)(((uint32_t)1 << code->width) - ++ val); ++ /* Otherwise, it was encoding a positive */ ++ return (int32_t)val; ++} ++ ++/* ---------------------- */ ++/* Descriptors/cachelines */ ++/* ---------------------- */ ++ ++/* To avoid needless dynamic allocation, the driver API often gives the caller ++ * a "descriptor" type that the caller can instantiate however they like. ++ * Ultimately though, it is just a cacheline of binary storage (or something ++ * smaller when it is known that the descriptor doesn't need all 64 bytes) for ++ * holding pre-formatted pieces of hardware commands. The performance-critical ++ * code can then copy these descriptors directly into hardware command ++ * registers more efficiently than trying to construct/format commands ++ * on-the-fly. The API user sees the descriptor as an array of 32-bit words in ++ * order for the compiler to know its size, but the internal details are not ++ * exposed. The following macro is used within the driver for converting *any* ++ * descriptor pointer to a usable array pointer. The use of a macro (instead of ++ * an inline) is necessary to work with different descriptor types and to work ++ * correctly with const and non-const inputs (and similarly-qualified outputs). ++ */ ++#define qb_cl(d) (&(d)->dont_manipulate_directly[0]) +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/qbman_private.h +@@ -0,0 +1,173 @@ ++/* Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++*/ ++ ++/* Perform extra checking */ ++#define QBMAN_CHECKING ++ ++/* To maximise the amount of logic that is common between the Linux driver and ++ * other targets (such as the embedded MC firmware), we pivot here between the ++ * inclusion of two platform-specific headers. ++ * ++ * The first, qbman_sys_decl.h, includes any and all required system headers as ++ * well as providing any definitions for the purposes of compatibility. The ++ * second, qbman_sys.h, is where platform-specific routines go. ++ * ++ * The point of the split is that the platform-independent code (including this ++ * header) may depend on platform-specific declarations, yet other ++ * platform-specific routines may depend on platform-independent definitions. ++ */ ++ ++#include "qbman_sys_decl.h" ++ ++#define QMAN_REV_4000 0x04000000 ++#define QMAN_REV_4100 0x04010000 ++#define QMAN_REV_4101 0x04010001 ++ ++/* When things go wrong, it is a convenient trick to insert a few FOO() ++ * statements in the code to trace progress. TODO: remove this once we are ++ * hacking the code less actively. ++ */ ++#define FOO() fsl_os_print("FOO: %s:%d\n", __FILE__, __LINE__) ++ ++/* Any time there is a register interface which we poll on, this provides a ++ * "break after x iterations" scheme for it. It's handy for debugging, eg. ++ * where you don't want millions of lines of log output from a polling loop ++ * that won't, because such things tend to drown out the earlier log output ++ * that might explain what caused the problem. (NB: put ";" after each macro!) ++ * TODO: we should probably remove this once we're done sanitising the ++ * simulator... ++ */ ++#define DBG_POLL_START(loopvar) (loopvar = 10) ++#define DBG_POLL_CHECK(loopvar) \ ++ do {if (!(loopvar--)) BUG_ON(1); } while (0) ++ ++/* For CCSR or portal-CINH registers that contain fields at arbitrary offsets ++ * and widths, these macro-generated encode/decode/isolate/remove inlines can ++ * be used. ++ * ++ * Eg. to "d"ecode a 14-bit field out of a register (into a "uint16_t" type), ++ * where the field is located 3 bits "up" from the least-significant bit of the ++ * register (ie. the field location within the 32-bit register corresponds to a ++ * mask of 0x0001fff8), you would do; ++ * uint16_t field = d32_uint16_t(3, 14, reg_value); ++ * ++ * Or to "e"ncode a 1-bit boolean value (input type is "int", zero is FALSE, ++ * non-zero is TRUE, so must convert all non-zero inputs to 1, hence the "!!" ++ * operator) into a register at bit location 0x00080000 (19 bits "in" from the ++ * LS bit), do; ++ * reg_value |= e32_int(19, 1, !!field); ++ * ++ * If you wish to read-modify-write a register, such that you leave the 14-bit ++ * field as-is but have all other fields set to zero, then "i"solate the 14-bit ++ * value using; ++ * reg_value = i32_uint16_t(3, 14, reg_value); ++ * ++ * Alternatively, you could "r"emove the 1-bit boolean field (setting it to ++ * zero) but leaving all other fields as-is; ++ * reg_val = r32_int(19, 1, reg_value); ++ * ++ */ ++#define MAKE_MASK32(width) (width == 32 ? 0xffffffff : \ ++ (uint32_t)((1 << width) - 1)) ++#define DECLARE_CODEC32(t) \ ++static inline uint32_t e32_##t(uint32_t lsoffset, uint32_t width, t val) \ ++{ \ ++ BUG_ON(width > (sizeof(t) * 8)); \ ++ return ((uint32_t)val & MAKE_MASK32(width)) << lsoffset; \ ++} \ ++static inline t d32_##t(uint32_t lsoffset, uint32_t width, uint32_t val) \ ++{ \ ++ BUG_ON(width > (sizeof(t) * 8)); \ ++ return (t)((val >> lsoffset) & MAKE_MASK32(width)); \ ++} \ ++static inline uint32_t i32_##t(uint32_t lsoffset, uint32_t width, \ ++ uint32_t val) \ ++{ \ ++ BUG_ON(width > (sizeof(t) * 8)); \ ++ return e32_##t(lsoffset, width, d32_##t(lsoffset, width, val)); \ ++} \ ++static inline uint32_t r32_##t(uint32_t lsoffset, uint32_t width, \ ++ uint32_t val) \ ++{ \ ++ BUG_ON(width > (sizeof(t) * 8)); \ ++ return ~(MAKE_MASK32(width) << lsoffset) & val; \ ++} ++DECLARE_CODEC32(uint32_t) ++DECLARE_CODEC32(uint16_t) ++DECLARE_CODEC32(uint8_t) ++DECLARE_CODEC32(int) ++ ++ /*********************/ ++ /* Debugging assists */ ++ /*********************/ ++ ++static inline void __hexdump(unsigned long start, unsigned long end, ++ unsigned long p, size_t sz, const unsigned char *c) ++{ ++ while (start < end) { ++ unsigned int pos = 0; ++ char buf[64]; ++ int nl = 0; ++ ++ pos += sprintf(buf + pos, "%08lx: ", start); ++ do { ++ if ((start < p) || (start >= (p + sz))) ++ pos += sprintf(buf + pos, ".."); ++ else ++ pos += sprintf(buf + pos, "%02x", *(c++)); ++ if (!(++start & 15)) { ++ buf[pos++] = '\n'; ++ nl = 1; ++ } else { ++ nl = 0; ++ if (!(start & 1)) ++ buf[pos++] = ' '; ++ if (!(start & 3)) ++ buf[pos++] = ' '; ++ } ++ } while (start & 15); ++ if (!nl) ++ buf[pos++] = '\n'; ++ buf[pos] = '\0'; ++ pr_info("%s", buf); ++ } ++} ++static inline void hexdump(const void *ptr, size_t sz) ++{ ++ unsigned long p = (unsigned long)ptr; ++ unsigned long start = p & ~(unsigned long)15; ++ unsigned long end = (p + sz + 15) & ~(unsigned long)15; ++ const unsigned char *c = ptr; ++ ++ __hexdump(start, end, p, sz, c); ++} ++ ++#include "qbman_sys.h" +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/qbman_sys.h +@@ -0,0 +1,307 @@ ++/* Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++/* qbman_sys_decl.h and qbman_sys.h are the two platform-specific files in the ++ * driver. They are only included via qbman_private.h, which is itself a ++ * platform-independent file and is included by all the other driver source. ++ * ++ * qbman_sys_decl.h is included prior to all other declarations and logic, and ++ * it exists to provide compatibility with any linux interfaces our ++ * single-source driver code is dependent on (eg. kmalloc). Ie. this file ++ * provides linux compatibility. ++ * ++ * This qbman_sys.h header, on the other hand, is included *after* any common ++ * and platform-neutral declarations and logic in qbman_private.h, and exists to ++ * implement any platform-specific logic of the qbman driver itself. Ie. it is ++ * *not* to provide linux compatibility. ++ */ ++ ++/* Trace the 3 different classes of read/write access to QBMan. #undef as ++ * required. */ ++#undef QBMAN_CCSR_TRACE ++#undef QBMAN_CINH_TRACE ++#undef QBMAN_CENA_TRACE ++ ++static inline void word_copy(void *d, const void *s, unsigned int cnt) ++{ ++ uint32_t *dd = d; ++ const uint32_t *ss = s; ++ ++ while (cnt--) ++ *(dd++) = *(ss++); ++} ++ ++/* Currently, the CENA support code expects each 32-bit word to be written in ++ * host order, and these are converted to hardware (little-endian) order on ++ * command submission. However, 64-bit quantities are must be written (and read) ++ * as two 32-bit words with the least-significant word first, irrespective of ++ * host endianness. */ ++static inline void u64_to_le32_copy(void *d, const uint64_t *s, ++ unsigned int cnt) ++{ ++ uint32_t *dd = d; ++ const uint32_t *ss = (const uint32_t *)s; ++ ++ while (cnt--) { ++ /* TBD: the toolchain was choking on the use of 64-bit types up ++ * until recently so this works entirely with 32-bit variables. ++ * When 64-bit types become usable again, investigate better ++ * ways of doing this. */ ++#if defined(__BIG_ENDIAN) ++ *(dd++) = ss[1]; ++ *(dd++) = ss[0]; ++ ss += 2; ++#else ++ *(dd++) = *(ss++); ++ *(dd++) = *(ss++); ++#endif ++ } ++} ++static inline void u64_from_le32_copy(uint64_t *d, const void *s, ++ unsigned int cnt) ++{ ++ const uint32_t *ss = s; ++ uint32_t *dd = (uint32_t *)d; ++ ++ while (cnt--) { ++#if defined(__BIG_ENDIAN) ++ dd[1] = *(ss++); ++ dd[0] = *(ss++); ++ dd += 2; ++#else ++ *(dd++) = *(ss++); ++ *(dd++) = *(ss++); ++#endif ++ } ++} ++ ++/* Convert a host-native 32bit value into little endian */ ++#if defined(__BIG_ENDIAN) ++static inline uint32_t make_le32(uint32_t val) ++{ ++ return ((val & 0xff) << 24) | ((val & 0xff00) << 8) | ++ ((val & 0xff0000) >> 8) | ((val & 0xff000000) >> 24); ++} ++static inline uint32_t make_le24(uint32_t val) ++{ ++ return (((val & 0xff) << 16) | (val & 0xff00) | ++ ((val & 0xff0000) >> 16)); ++} ++#else ++#define make_le32(val) (val) ++#define make_le24(val) (val) ++#endif ++static inline void make_le32_n(uint32_t *val, unsigned int num) ++{ ++ while (num--) { ++ *val = make_le32(*val); ++ val++; ++ } ++} ++ ++ /******************/ ++ /* Portal access */ ++ /******************/ ++struct qbman_swp_sys { ++ /* On GPP, the sys support for qbman_swp is here. The CENA region isi ++ * not an mmap() of the real portal registers, but an allocated ++ * place-holder, because the actual writes/reads to/from the portal are ++ * marshalled from these allocated areas using QBMan's "MC access ++ * registers". CINH accesses are atomic so there's no need for a ++ * place-holder. */ ++ void *cena; ++ void __iomem *addr_cena; ++ void __iomem *addr_cinh; ++}; ++ ++/* P_OFFSET is (ACCESS_CMD,0,12) - offset within the portal ++ * C is (ACCESS_CMD,12,1) - is inhibited? (0==CENA, 1==CINH) ++ * SWP_IDX is (ACCESS_CMD,16,10) - Software portal index ++ * P is (ACCESS_CMD,28,1) - (0==special portal, 1==any portal) ++ * T is (ACCESS_CMD,29,1) - Command type (0==READ, 1==WRITE) ++ * E is (ACCESS_CMD,31,1) - Command execute (1 to issue, poll for 0==complete) ++ */ ++ ++static inline void qbman_cinh_write(struct qbman_swp_sys *s, uint32_t offset, ++ uint32_t val) ++{ ++ ++ writel_relaxed(val, s->addr_cinh + offset); ++#ifdef QBMAN_CINH_TRACE ++ pr_info("qbman_cinh_write(%p:0x%03x) 0x%08x\n", ++ s->addr_cinh, offset, val); ++#endif ++} ++ ++static inline uint32_t qbman_cinh_read(struct qbman_swp_sys *s, uint32_t offset) ++{ ++ uint32_t reg = readl_relaxed(s->addr_cinh + offset); ++ ++#ifdef QBMAN_CINH_TRACE ++ pr_info("qbman_cinh_read(%p:0x%03x) 0x%08x\n", ++ s->addr_cinh, offset, reg); ++#endif ++ return reg; ++} ++ ++static inline void *qbman_cena_write_start(struct qbman_swp_sys *s, ++ uint32_t offset) ++{ ++ void *shadow = s->cena + offset; ++ ++#ifdef QBMAN_CENA_TRACE ++ pr_info("qbman_cena_write_start(%p:0x%03x) %p\n", ++ s->addr_cena, offset, shadow); ++#endif ++ BUG_ON(offset & 63); ++ dcbz(shadow); ++ return shadow; ++} ++ ++static inline void qbman_cena_write_complete(struct qbman_swp_sys *s, ++ uint32_t offset, void *cmd) ++{ ++ const uint32_t *shadow = cmd; ++ int loop; ++ ++#ifdef QBMAN_CENA_TRACE ++ pr_info("qbman_cena_write_complete(%p:0x%03x) %p\n", ++ s->addr_cena, offset, shadow); ++ hexdump(cmd, 64); ++#endif ++ for (loop = 15; loop >= 1; loop--) ++ writel_relaxed(shadow[loop], s->addr_cena + ++ offset + loop * 4); ++ lwsync(); ++ writel_relaxed(shadow[0], s->addr_cena + offset); ++ dcbf(s->addr_cena + offset); ++} ++ ++static inline void *qbman_cena_read(struct qbman_swp_sys *s, uint32_t offset) ++{ ++ uint32_t *shadow = s->cena + offset; ++ unsigned int loop; ++ ++#ifdef QBMAN_CENA_TRACE ++ pr_info("qbman_cena_read(%p:0x%03x) %p\n", ++ s->addr_cena, offset, shadow); ++#endif ++ ++ for (loop = 0; loop < 16; loop++) ++ shadow[loop] = readl_relaxed(s->addr_cena + offset ++ + loop * 4); ++#ifdef QBMAN_CENA_TRACE ++ hexdump(shadow, 64); ++#endif ++ return shadow; ++} ++ ++static inline void qbman_cena_invalidate_prefetch(struct qbman_swp_sys *s, ++ uint32_t offset) ++{ ++ dcivac(s->addr_cena + offset); ++ prefetch_for_load(s->addr_cena + offset); ++} ++ ++ /******************/ ++ /* Portal support */ ++ /******************/ ++ ++/* The SWP_CFG portal register is special, in that it is used by the ++ * platform-specific code rather than the platform-independent code in ++ * qbman_portal.c. So use of it is declared locally here. */ ++#define QBMAN_CINH_SWP_CFG 0xd00 ++ ++/* For MC portal use, we always configure with ++ * DQRR_MF is (SWP_CFG,20,3) - DQRR max fill (<- 0x4) ++ * EST is (SWP_CFG,16,3) - EQCR_CI stashing threshold (<- 0x0) ++ * RPM is (SWP_CFG,12,2) - RCR production notification mode (<- 0x3) ++ * DCM is (SWP_CFG,10,2) - DQRR consumption notification mode (<- 0x2) ++ * EPM is (SWP_CFG,8,2) - EQCR production notification mode (<- 0x3) ++ * SD is (SWP_CFG,5,1) - memory stashing drop enable (<- FALSE) ++ * SP is (SWP_CFG,4,1) - memory stashing priority (<- TRUE) ++ * SE is (SWP_CFG,3,1) - memory stashing enable (<- 0x0) ++ * DP is (SWP_CFG,2,1) - dequeue stashing priority (<- TRUE) ++ * DE is (SWP_CFG,1,1) - dequeue stashing enable (<- 0x0) ++ * EP is (SWP_CFG,0,1) - EQCR_CI stashing priority (<- FALSE) ++ */ ++static inline uint32_t qbman_set_swp_cfg(uint8_t max_fill, uint8_t wn, ++ uint8_t est, uint8_t rpm, uint8_t dcm, ++ uint8_t epm, int sd, int sp, int se, ++ int dp, int de, int ep) ++{ ++ uint32_t reg; ++ ++ reg = e32_uint8_t(20, (uint32_t)(3 + (max_fill >> 3)), max_fill) | ++ e32_uint8_t(16, 3, est) | e32_uint8_t(12, 2, rpm) | ++ e32_uint8_t(10, 2, dcm) | e32_uint8_t(8, 2, epm) | ++ e32_int(5, 1, sd) | e32_int(4, 1, sp) | e32_int(3, 1, se) | ++ e32_int(2, 1, dp) | e32_int(1, 1, de) | e32_int(0, 1, ep) | ++ e32_uint8_t(14, 1, wn); ++ return reg; ++} ++ ++static inline int qbman_swp_sys_init(struct qbman_swp_sys *s, ++ const struct qbman_swp_desc *d, ++ uint8_t dqrr_size) ++{ ++ uint32_t reg; ++ ++ s->addr_cena = d->cena_bar; ++ s->addr_cinh = d->cinh_bar; ++ s->cena = (void *)get_zeroed_page(GFP_KERNEL); ++ if (!s->cena) { ++ pr_err("Could not allocate page for cena shadow\n"); ++ return -1; ++ } ++ ++#ifdef QBMAN_CHECKING ++ /* We should never be asked to initialise for a portal that isn't in ++ * the power-on state. (Ie. don't forget to reset portals when they are ++ * decommissioned!) ++ */ ++ reg = qbman_cinh_read(s, QBMAN_CINH_SWP_CFG); ++ BUG_ON(reg); ++#endif ++ reg = qbman_set_swp_cfg(dqrr_size, 0, 0, 3, 2, 3, 0, 1, 0, 1, 0, 0); ++ qbman_cinh_write(s, QBMAN_CINH_SWP_CFG, reg); ++ reg = qbman_cinh_read(s, QBMAN_CINH_SWP_CFG); ++ if (!reg) { ++ pr_err("The portal is not enabled!\n"); ++ kfree(s->cena); ++ return -1; ++ } ++ return 0; ++} ++ ++static inline void qbman_swp_sys_finish(struct qbman_swp_sys *s) ++{ ++ free_page((unsigned long)s->cena); ++} +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/qbman_sys_decl.h +@@ -0,0 +1,86 @@ ++/* Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "fsl_qbman_base.h" ++ ++/* The platform-independent code shouldn't need endianness, except for ++ * weird/fast-path cases like qbman_result_has_token(), which needs to ++ * perform a passive and endianness-specific test on a read-only data structure ++ * very quickly. It's an exception, and this symbol is used for that case. */ ++#if defined(__BIG_ENDIAN) ++#define DQRR_TOK_OFFSET 0 ++#define QBMAN_RESULT_VERB_OFFSET_IN_MEM 24 ++#define SCN_STATE_OFFSET_IN_MEM 8 ++#define SCN_RID_OFFSET_IN_MEM 8 ++#else ++#define DQRR_TOK_OFFSET 24 ++#define QBMAN_RESULT_VERB_OFFSET_IN_MEM 0 ++#define SCN_STATE_OFFSET_IN_MEM 16 ++#define SCN_RID_OFFSET_IN_MEM 0 ++#endif ++ ++/* Similarly-named functions */ ++#define upper32(a) upper_32_bits(a) ++#define lower32(a) lower_32_bits(a) ++ ++ /****************/ ++ /* arch assists */ ++ /****************/ ++ ++#define dcbz(p) { asm volatile("dc zva, %0" : : "r" (p) : "memory"); } ++#define lwsync() { asm volatile("dmb st" : : : "memory"); } ++#define dcbf(p) { asm volatile("dc cvac, %0;" : : "r" (p) : "memory"); } ++#define dcivac(p) { asm volatile("dc ivac, %0" : : "r"(p) : "memory"); } ++static inline void prefetch_for_load(void *p) ++{ ++ asm volatile("prfm pldl1keep, [%0, #64]" : : "r" (p)); ++} ++static inline void prefetch_for_store(void *p) ++{ ++ asm volatile("prfm pstl1keep, [%0, #64]" : : "r" (p)); ++} +--- /dev/null ++++ b/drivers/staging/fsl-mc/bus/dpio/qbman_test.c +@@ -0,0 +1,664 @@ ++/* Copyright (C) 2014 Freescale Semiconductor, Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++#include ++#include ++ ++#include "qbman_private.h" ++#include "fsl_qbman_portal.h" ++#include "qbman_debug.h" ++#include "../../include/fsl_dpaa2_fd.h" ++ ++#define QBMAN_SWP_CENA_BASE 0x818000000 ++#define QBMAN_SWP_CINH_BASE 0x81c000000 ++ ++#define QBMAN_PORTAL_IDX 2 ++#define QBMAN_TEST_FQID 19 ++#define QBMAN_TEST_BPID 23 ++#define QBMAN_USE_QD ++#ifdef QBMAN_USE_QD ++#define QBMAN_TEST_QDID 1 ++#endif ++#define QBMAN_TEST_LFQID 0xf00010 ++ ++#define NUM_EQ_FRAME 10 ++#define NUM_DQ_FRAME 10 ++#define NUM_DQ_IN_DQRR 5 ++#define NUM_DQ_IN_MEM (NUM_DQ_FRAME - NUM_DQ_IN_DQRR) ++ ++static struct qbman_swp *swp; ++static struct qbman_eq_desc eqdesc; ++static struct qbman_pull_desc pulldesc; ++static struct qbman_release_desc releasedesc; ++static struct qbman_eq_response eq_storage[1]; ++static struct dpaa2_dq dq_storage[NUM_DQ_IN_MEM] __aligned(64); ++static dma_addr_t eq_storage_phys; ++static dma_addr_t dq_storage_phys; ++ ++/* FQ ctx attribute values for the test code. */ ++#define FQCTX_HI 0xabbaf00d ++#define FQCTX_LO 0x98765432 ++#define FQ_VFQID 0x123456 ++ ++/* Sample frame descriptor */ ++static struct qbman_fd_simple fd = { ++ .addr_lo = 0xbabaf33d, ++ .addr_hi = 0x01234567, ++ .len = 0x7777, ++ .frc = 0xdeadbeef, ++ .flc_lo = 0xcafecafe, ++ .flc_hi = 0xbeadabba ++}; ++ ++static void fd_inc(struct qbman_fd_simple *_fd) ++{ ++ _fd->addr_lo += _fd->len; ++ _fd->flc_lo += 0x100; ++ _fd->frc += 0x10; ++} ++ ++static int fd_cmp(struct qbman_fd *fda, struct qbman_fd *fdb) ++{ ++ int i; ++ ++ for (i = 0; i < 8; i++) ++ if (fda->words[i] - fdb->words[i]) ++ return 1; ++ return 0; ++} ++ ++struct qbman_fd fd_eq[NUM_EQ_FRAME]; ++struct qbman_fd fd_dq[NUM_DQ_FRAME]; ++ ++/* "Buffers" to be released (and storage for buffers to be acquired) */ ++static uint64_t rbufs[320]; ++static uint64_t abufs[320]; ++ ++static void do_enqueue(struct qbman_swp *swp) ++{ ++ int i, j, ret; ++ ++#ifdef QBMAN_USE_QD ++ pr_info("*****QBMan_test: Enqueue %d frames to QD %d\n", ++ NUM_EQ_FRAME, QBMAN_TEST_QDID); ++#else ++ pr_info("*****QBMan_test: Enqueue %d frames to FQ %d\n", ++ NUM_EQ_FRAME, QBMAN_TEST_FQID); ++#endif ++ for (i = 0; i < NUM_EQ_FRAME; i++) { ++ /*********************************/ ++ /* Prepare a enqueue descriptor */ ++ /*********************************/ ++ memset(eq_storage, 0, sizeof(eq_storage)); ++ eq_storage_phys = virt_to_phys(eq_storage); ++ qbman_eq_desc_clear(&eqdesc); ++ qbman_eq_desc_set_no_orp(&eqdesc, 0); ++ qbman_eq_desc_set_response(&eqdesc, eq_storage_phys, 0); ++ qbman_eq_desc_set_token(&eqdesc, 0x99); ++#ifdef QBMAN_USE_QD ++ /**********************************/ ++ /* Prepare a Queueing Destination */ ++ /**********************************/ ++ qbman_eq_desc_set_qd(&eqdesc, QBMAN_TEST_QDID, 0, 3); ++#else ++ qbman_eq_desc_set_fq(&eqdesc, QBMAN_TEST_FQID); ++#endif ++ ++ /******************/ ++ /* Try an enqueue */ ++ /******************/ ++ ret = qbman_swp_enqueue(swp, &eqdesc, ++ (const struct qbman_fd *)&fd); ++ BUG_ON(ret); ++ for (j = 0; j < 8; j++) ++ fd_eq[i].words[j] = *((uint32_t *)&fd + j); ++ fd_inc(&fd); ++ } ++} ++ ++static void do_push_dequeue(struct qbman_swp *swp) ++{ ++ int i, j; ++ const struct dpaa2_dq *dq_storage1; ++ const struct qbman_fd *__fd; ++ int loopvar; ++ ++ pr_info("*****QBMan_test: Start push dequeue\n"); ++ for (i = 0; i < NUM_DQ_FRAME; i++) { ++ DBG_POLL_START(loopvar); ++ do { ++ DBG_POLL_CHECK(loopvar); ++ dq_storage1 = qbman_swp_dqrr_next(swp); ++ } while (!dq_storage1); ++ if (dq_storage1) { ++ __fd = (const struct qbman_fd *) ++ dpaa2_dq_fd(dq_storage1); ++ for (j = 0; j < 8; j++) ++ fd_dq[i].words[j] = __fd->words[j]; ++ if (fd_cmp(&fd_eq[i], &fd_dq[i])) { ++ pr_info("enqueue FD is\n"); ++ hexdump(&fd_eq[i], 32); ++ pr_info("dequeue FD is\n"); ++ hexdump(&fd_dq[i], 32); ++ } ++ qbman_swp_dqrr_consume(swp, dq_storage1); ++ } else { ++ pr_info("The push dequeue fails\n"); ++ } ++ } ++} ++ ++static void do_pull_dequeue(struct qbman_swp *swp) ++{ ++ int i, j, ret; ++ const struct dpaa2_dq *dq_storage1; ++ const struct qbman_fd *__fd; ++ int loopvar; ++ ++ pr_info("*****QBMan_test: Dequeue %d frames with dq entry in DQRR\n", ++ NUM_DQ_IN_DQRR); ++ for (i = 0; i < NUM_DQ_IN_DQRR; i++) { ++ qbman_pull_desc_clear(&pulldesc); ++ qbman_pull_desc_set_storage(&pulldesc, NULL, 0, 0); ++ qbman_pull_desc_set_numframes(&pulldesc, 1); ++ qbman_pull_desc_set_fq(&pulldesc, QBMAN_TEST_FQID); ++ ++ ret = qbman_swp_pull(swp, &pulldesc); ++ BUG_ON(ret); ++ DBG_POLL_START(loopvar); ++ do { ++ DBG_POLL_CHECK(loopvar); ++ dq_storage1 = qbman_swp_dqrr_next(swp); ++ } while (!dq_storage1); ++ ++ if (dq_storage1) { ++ __fd = (const struct qbman_fd *) ++ dpaa2_dq_fd(dq_storage1); ++ for (j = 0; j < 8; j++) ++ fd_dq[i].words[j] = __fd->words[j]; ++ if (fd_cmp(&fd_eq[i], &fd_dq[i])) { ++ pr_info("enqueue FD is\n"); ++ hexdump(&fd_eq[i], 32); ++ pr_info("dequeue FD is\n"); ++ hexdump(&fd_dq[i], 32); ++ } ++ qbman_swp_dqrr_consume(swp, dq_storage1); ++ } else { ++ pr_info("Dequeue with dq entry in DQRR fails\n"); ++ } ++ } ++ ++ pr_info("*****QBMan_test: Dequeue %d frames with dq entry in memory\n", ++ NUM_DQ_IN_MEM); ++ for (i = 0; i < NUM_DQ_IN_MEM; i++) { ++ dq_storage_phys = virt_to_phys(&dq_storage[i]); ++ qbman_pull_desc_clear(&pulldesc); ++ qbman_pull_desc_set_storage(&pulldesc, &dq_storage[i], ++ dq_storage_phys, 1); ++ qbman_pull_desc_set_numframes(&pulldesc, 1); ++ qbman_pull_desc_set_fq(&pulldesc, QBMAN_TEST_FQID); ++ ret = qbman_swp_pull(swp, &pulldesc); ++ BUG_ON(ret); ++ ++ DBG_POLL_START(loopvar); ++ do { ++ DBG_POLL_CHECK(loopvar); ++ ret = qbman_result_has_new_result(swp, ++ &dq_storage[i]); ++ } while (!ret); ++ ++ if (ret) { ++ for (j = 0; j < 8; j++) ++ fd_dq[i + NUM_DQ_IN_DQRR].words[j] = ++ dq_storage[i].dont_manipulate_directly[j + 8]; ++ j = i + NUM_DQ_IN_DQRR; ++ if (fd_cmp(&fd_eq[j], &fd_dq[j])) { ++ pr_info("enqueue FD is\n"); ++ hexdump(&fd_eq[i + NUM_DQ_IN_DQRR], 32); ++ pr_info("dequeue FD is\n"); ++ hexdump(&fd_dq[i + NUM_DQ_IN_DQRR], 32); ++ hexdump(&dq_storage[i], 64); ++ } ++ } else { ++ pr_info("Dequeue with dq entry in memory fails\n"); ++ } ++ } ++} ++ ++static void release_buffer(struct qbman_swp *swp, unsigned int num) ++{ ++ int ret; ++ unsigned int i, j; ++ ++ qbman_release_desc_clear(&releasedesc); ++ qbman_release_desc_set_bpid(&releasedesc, QBMAN_TEST_BPID); ++ pr_info("*****QBMan_test: Release %d buffers to BP %d\n", ++ num, QBMAN_TEST_BPID); ++ for (i = 0; i < (num / 7 + 1); i++) { ++ j = ((num - i * 7) > 7) ? 7 : (num - i * 7); ++ ret = qbman_swp_release(swp, &releasedesc, &rbufs[i * 7], j); ++ BUG_ON(ret); ++ } ++} ++ ++static void acquire_buffer(struct qbman_swp *swp, unsigned int num) ++{ ++ int ret; ++ unsigned int i, j; ++ ++ pr_info("*****QBMan_test: Acquire %d buffers from BP %d\n", ++ num, QBMAN_TEST_BPID); ++ ++ for (i = 0; i < (num / 7 + 1); i++) { ++ j = ((num - i * 7) > 7) ? 7 : (num - i * 7); ++ ret = qbman_swp_acquire(swp, QBMAN_TEST_BPID, &abufs[i * 7], j); ++ BUG_ON(ret != j); ++ } ++} ++ ++static void buffer_pool_test(struct qbman_swp *swp) ++{ ++ struct qbman_attr info; ++ struct dpaa2_dq *bpscn_message; ++ dma_addr_t bpscn_phys; ++ uint64_t bpscn_ctx; ++ uint64_t ctx = 0xbbccddaadeadbeefull; ++ int i, ret; ++ uint32_t hw_targ; ++ ++ pr_info("*****QBMan_test: test buffer pool management\n"); ++ ret = qbman_bp_query(swp, QBMAN_TEST_BPID, &info); ++ qbman_bp_attr_get_bpscn_addr(&info, &bpscn_phys); ++ pr_info("The bpscn is %llx, info_phys is %llx\n", bpscn_phys, ++ virt_to_phys(&info)); ++ bpscn_message = phys_to_virt(bpscn_phys); ++ ++ for (i = 0; i < 320; i++) ++ rbufs[i] = 0xf00dabba01234567ull + i * 0x40; ++ ++ release_buffer(swp, 320); ++ ++ pr_info("QBMan_test: query the buffer pool\n"); ++ qbman_bp_query(swp, QBMAN_TEST_BPID, &info); ++ hexdump(&info, 64); ++ qbman_bp_attr_get_hw_targ(&info, &hw_targ); ++ pr_info("hw_targ is %d\n", hw_targ); ++ ++ /* Acquire buffers to trigger BPSCN */ ++ acquire_buffer(swp, 300); ++ /* BPSCN should be written to the memory */ ++ qbman_bp_query(swp, QBMAN_TEST_BPID, &info); ++ hexdump(&info, 64); ++ hexdump(bpscn_message, 64); ++ BUG_ON(!qbman_result_is_BPSCN(bpscn_message)); ++ /* There should be free buffers in the pool */ ++ BUG_ON(!(qbman_result_bpscn_has_free_bufs(bpscn_message))); ++ /* Buffer pool is depleted */ ++ BUG_ON(!qbman_result_bpscn_is_depleted(bpscn_message)); ++ /* The ctx should match */ ++ bpscn_ctx = qbman_result_bpscn_ctx(bpscn_message); ++ pr_info("BPSCN test: ctx %llx, bpscn_ctx %llx\n", ctx, bpscn_ctx); ++ BUG_ON(ctx != bpscn_ctx); ++ memset(bpscn_message, 0, sizeof(struct dpaa2_dq)); ++ ++ /* Re-seed the buffer pool to trigger BPSCN */ ++ release_buffer(swp, 240); ++ /* BPSCN should be written to the memory */ ++ BUG_ON(!qbman_result_is_BPSCN(bpscn_message)); ++ /* There should be free buffers in the pool */ ++ BUG_ON(!(qbman_result_bpscn_has_free_bufs(bpscn_message))); ++ /* Buffer pool is not depleted */ ++ BUG_ON(qbman_result_bpscn_is_depleted(bpscn_message)); ++ memset(bpscn_message, 0, sizeof(struct dpaa2_dq)); ++ ++ acquire_buffer(swp, 260); ++ /* BPSCN should be written to the memory */ ++ BUG_ON(!qbman_result_is_BPSCN(bpscn_message)); ++ /* There should be free buffers in the pool while BPSCN generated */ ++ BUG_ON(!(qbman_result_bpscn_has_free_bufs(bpscn_message))); ++ /* Buffer pool is depletion */ ++ BUG_ON(!qbman_result_bpscn_is_depleted(bpscn_message)); ++} ++ ++static void ceetm_test(struct qbman_swp *swp) ++{ ++ int i, j, ret; ++ ++ qbman_eq_desc_clear(&eqdesc); ++ qbman_eq_desc_set_no_orp(&eqdesc, 0); ++ qbman_eq_desc_set_fq(&eqdesc, QBMAN_TEST_LFQID); ++ pr_info("*****QBMan_test: Enqueue to LFQID %x\n", ++ QBMAN_TEST_LFQID); ++ for (i = 0; i < NUM_EQ_FRAME; i++) { ++ ret = qbman_swp_enqueue(swp, &eqdesc, ++ (const struct qbman_fd *)&fd); ++ BUG_ON(ret); ++ for (j = 0; j < 8; j++) ++ fd_eq[i].words[j] = *((uint32_t *)&fd + j); ++ fd_inc(&fd); ++ } ++} ++ ++int qbman_test(void) ++{ ++ struct qbman_swp_desc pd; ++ uint32_t reg; ++ ++ pd.cena_bar = ioremap_cache_ns(QBMAN_SWP_CENA_BASE + ++ QBMAN_PORTAL_IDX * 0x10000, 0x10000); ++ pd.cinh_bar = ioremap(QBMAN_SWP_CINH_BASE + ++ QBMAN_PORTAL_IDX * 0x10000, 0x10000); ++ ++ /* Detect whether the mc image is the test image with GPP setup */ ++ reg = readl_relaxed(pd.cena_bar + 0x4); ++ if (reg != 0xdeadbeef) { ++ pr_err("The MC image doesn't have GPP test setup, stop!\n"); ++ iounmap(pd.cena_bar); ++ iounmap(pd.cinh_bar); ++ return -1; ++ } ++ ++ pr_info("*****QBMan_test: Init QBMan SWP %d\n", QBMAN_PORTAL_IDX); ++ swp = qbman_swp_init(&pd); ++ if (!swp) { ++ iounmap(pd.cena_bar); ++ iounmap(pd.cinh_bar); ++ return -1; ++ } ++ ++ /*******************/ ++ /* Enqueue frames */ ++ /*******************/ ++ do_enqueue(swp); ++ ++ /*******************/ ++ /* Do pull dequeue */ ++ /*******************/ ++ do_pull_dequeue(swp); ++ ++ /*******************/ ++ /* Enqueue frames */ ++ /*******************/ ++ qbman_swp_push_set(swp, 0, 1); ++ qbman_swp_fq_schedule(swp, QBMAN_TEST_FQID); ++ do_enqueue(swp); ++ ++ /*******************/ ++ /* Do push dequeue */ ++ /*******************/ ++ do_push_dequeue(swp); ++ ++ /**************************/ ++ /* Test buffer pool funcs */ ++ /**************************/ ++ buffer_pool_test(swp); ++ ++ /******************/ ++ /* CEETM test */ ++ /******************/ ++ ceetm_test(swp); ++ ++ qbman_swp_finish(swp); ++ pr_info("*****QBMan_test: Kernel test Passed\n"); ++ return 0; ++} ++ ++/* user-space test-case, definitions: ++ * ++ * 1 portal only, using portal index 3. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define QBMAN_TEST_US_SWP 3 /* portal index for user space */ ++ ++#define QBMAN_TEST_MAGIC 'q' ++struct qbman_test_swp_ioctl { ++ unsigned long portal1_cinh; ++ unsigned long portal1_cena; ++}; ++struct qbman_test_dma_ioctl { ++ unsigned long ptr; ++ uint64_t phys_addr; ++}; ++ ++struct qbman_test_priv { ++ int has_swp_map; ++ int has_dma_map; ++ unsigned long pgoff; ++}; ++ ++#define QBMAN_TEST_SWP_MAP \ ++ _IOR(QBMAN_TEST_MAGIC, 0x01, struct qbman_test_swp_ioctl) ++#define QBMAN_TEST_SWP_UNMAP \ ++ _IOR(QBMAN_TEST_MAGIC, 0x02, struct qbman_test_swp_ioctl) ++#define QBMAN_TEST_DMA_MAP \ ++ _IOR(QBMAN_TEST_MAGIC, 0x03, struct qbman_test_dma_ioctl) ++#define QBMAN_TEST_DMA_UNMAP \ ++ _IOR(QBMAN_TEST_MAGIC, 0x04, struct qbman_test_dma_ioctl) ++ ++#define TEST_PORTAL1_CENA_PGOFF ((QBMAN_SWP_CENA_BASE + QBMAN_TEST_US_SWP * \ ++ 0x10000) >> PAGE_SHIFT) ++#define TEST_PORTAL1_CINH_PGOFF ((QBMAN_SWP_CINH_BASE + QBMAN_TEST_US_SWP * \ ++ 0x10000) >> PAGE_SHIFT) ++ ++static int qbman_test_open(struct inode *inode, struct file *filp) ++{ ++ struct qbman_test_priv *priv; ++ ++ priv = kmalloc(sizeof(struct qbman_test_priv), GFP_KERNEL); ++ if (!priv) ++ return -EIO; ++ filp->private_data = priv; ++ priv->has_swp_map = 0; ++ priv->has_dma_map = 0; ++ priv->pgoff = 0; ++ return 0; ++} ++ ++static int qbman_test_mmap(struct file *filp, struct vm_area_struct *vma) ++{ ++ int ret; ++ struct qbman_test_priv *priv = filp->private_data; ++ ++ BUG_ON(!priv); ++ ++ if (vma->vm_pgoff == TEST_PORTAL1_CINH_PGOFF) ++ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); ++ else if (vma->vm_pgoff == TEST_PORTAL1_CENA_PGOFF) ++ vma->vm_page_prot = pgprot_cached_ns(vma->vm_page_prot); ++ else if (vma->vm_pgoff == priv->pgoff) ++ vma->vm_page_prot = pgprot_cached(vma->vm_page_prot); ++ else { ++ pr_err("Damn, unrecognised pg_off!!\n"); ++ return -EINVAL; ++ } ++ ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, ++ vma->vm_end - vma->vm_start, ++ vma->vm_page_prot); ++ return ret; ++} ++ ++static long qbman_test_ioctl(struct file *fp, unsigned int cmd, ++ unsigned long arg) ++{ ++ void __user *a = (void __user *)arg; ++ unsigned long longret, populate; ++ int ret = 0; ++ struct qbman_test_priv *priv = fp->private_data; ++ ++ BUG_ON(!priv); ++ ++ switch (cmd) { ++ case QBMAN_TEST_SWP_MAP: ++ { ++ struct qbman_test_swp_ioctl params; ++ ++ if (priv->has_swp_map) ++ return -EINVAL; ++ down_write(¤t->mm->mmap_sem); ++ /* Map portal1 CINH */ ++ longret = do_mmap_pgoff(fp, PAGE_SIZE, 0x10000, ++ PROT_READ | PROT_WRITE, MAP_SHARED, ++ TEST_PORTAL1_CINH_PGOFF, &populate); ++ if (longret & ~PAGE_MASK) { ++ ret = (int)longret; ++ goto out; ++ } ++ params.portal1_cinh = longret; ++ /* Map portal1 CENA */ ++ longret = do_mmap_pgoff(fp, PAGE_SIZE, 0x10000, ++ PROT_READ | PROT_WRITE, MAP_SHARED, ++ TEST_PORTAL1_CENA_PGOFF, &populate); ++ if (longret & ~PAGE_MASK) { ++ ret = (int)longret; ++ goto out; ++ } ++ params.portal1_cena = longret; ++ priv->has_swp_map = 1; ++out: ++ up_write(¤t->mm->mmap_sem); ++ if (!ret && copy_to_user(a, ¶ms, sizeof(params))) ++ return -EFAULT; ++ return ret; ++ } ++ case QBMAN_TEST_SWP_UNMAP: ++ { ++ struct qbman_test_swp_ioctl params; ++ ++ if (!priv->has_swp_map) ++ return -EINVAL; ++ ++ if (copy_from_user(¶ms, a, sizeof(params))) ++ return -EFAULT; ++ down_write(¤t->mm->mmap_sem); ++ do_munmap(current->mm, params.portal1_cena, 0x10000); ++ do_munmap(current->mm, params.portal1_cinh, 0x10000); ++ up_write(¤t->mm->mmap_sem); ++ priv->has_swp_map = 0; ++ return 0; ++ } ++ case QBMAN_TEST_DMA_MAP: ++ { ++ struct qbman_test_dma_ioctl params; ++ void *vaddr; ++ ++ if (priv->has_dma_map) ++ return -EINVAL; ++ vaddr = (void *)get_zeroed_page(GFP_KERNEL); ++ params.phys_addr = virt_to_phys(vaddr); ++ priv->pgoff = (unsigned long)params.phys_addr >> PAGE_SHIFT; ++ down_write(¤t->mm->mmap_sem); ++ longret = do_mmap_pgoff(fp, PAGE_SIZE, PAGE_SIZE, ++ PROT_READ | PROT_WRITE, MAP_SHARED, ++ priv->pgoff, &populate); ++ if (longret & ~PAGE_MASK) { ++ ret = (int)longret; ++ return ret; ++ } ++ params.ptr = longret; ++ priv->has_dma_map = 1; ++ up_write(¤t->mm->mmap_sem); ++ if (copy_to_user(a, ¶ms, sizeof(params))) ++ return -EFAULT; ++ return 0; ++ } ++ case QBMAN_TEST_DMA_UNMAP: ++ { ++ struct qbman_test_dma_ioctl params; ++ ++ if (!priv->has_dma_map) ++ return -EINVAL; ++ if (copy_from_user(¶ms, a, sizeof(params))) ++ return -EFAULT; ++ down_write(¤t->mm->mmap_sem); ++ do_munmap(current->mm, params.ptr, PAGE_SIZE); ++ up_write(¤t->mm->mmap_sem); ++ free_page((unsigned long)phys_to_virt(params.phys_addr)); ++ priv->has_dma_map = 0; ++ return 0; ++ } ++ default: ++ pr_err("Bad ioctl cmd!\n"); ++ } ++ return -EINVAL; ++} ++ ++static const struct file_operations qbman_fops = { ++ .open = qbman_test_open, ++ .mmap = qbman_test_mmap, ++ .unlocked_ioctl = qbman_test_ioctl ++}; ++ ++static struct miscdevice qbman_miscdev = { ++ .name = "qbman-test", ++ .fops = &qbman_fops, ++ .minor = MISC_DYNAMIC_MINOR, ++}; ++ ++static int qbman_miscdev_init; ++ ++static int test_init(void) ++{ ++ int ret = qbman_test(); ++ ++ if (!ret) { ++ /* MC image supports the test cases, so instantiate the ++ * character devic that the user-space test case will use to do ++ * its memory mappings. */ ++ ret = misc_register(&qbman_miscdev); ++ if (ret) { ++ pr_err("qbman-test: failed to register misc device\n"); ++ return ret; ++ } ++ pr_info("qbman-test: misc device registered!\n"); ++ qbman_miscdev_init = 1; ++ } ++ return 0; ++} ++ ++static void test_exit(void) ++{ ++ if (qbman_miscdev_init) { ++ misc_deregister(&qbman_miscdev); ++ qbman_miscdev_init = 0; ++ } ++} ++ ++module_init(test_init); ++module_exit(test_exit); +--- /dev/null ++++ b/drivers/staging/fsl-mc/include/fsl_dpaa2_fd.h +@@ -0,0 +1,774 @@ ++/* Copyright 2014 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPAA2_FD_H ++#define __FSL_DPAA2_FD_H ++ ++/** ++ * DOC: DPAA2 FD - Frame Descriptor APIs for DPAA2 ++ * ++ * Frame Descriptors (FDs) are used to describe frame data in the DPAA2. ++ * Frames can be enqueued and dequeued to Frame Queues which are consumed ++ * by the various DPAA accelerators (WRIOP, SEC, PME, DCE) ++ * ++ * There are three types of frames: Single, Scatter Gather and Frame Lists. ++ * ++ * The set of APIs in this file must be used to create, manipulate and ++ * query Frame Descriptor. ++ * ++ */ ++ ++/** ++ * struct dpaa2_fd - Place-holder for FDs. ++ * @words: for easier/faster copying the whole FD structure. ++ * @addr_lo: the lower 32 bits of the address in FD. ++ * @addr_hi: the upper 32 bits of the address in FD. ++ * @len: the length field in FD. ++ * @bpid_offset: represent the bpid and offset fields in FD ++ * @frc: frame context ++ * @ctrl: the 32bit control bits including dd, sc,... va, err. ++ * @flc_lo: the lower 32bit of flow context. ++ * @flc_hi: the upper 32bits of flow context. ++ * ++ * This structure represents the basic Frame Descriptor used in the system. ++ * We represent it via the simplest form that we need for now. Different ++ * overlays may be needed to support different options, etc. (It is impractical ++ * to define One True Struct, because the resulting encoding routines (lots of ++ * read-modify-writes) would be worst-case performance whether or not ++ * circumstances required them.) ++ */ ++struct dpaa2_fd { ++ union { ++ u32 words[8]; ++ struct dpaa2_fd_simple { ++ u32 addr_lo; ++ u32 addr_hi; ++ u32 len; ++ /* offset in the MS 16 bits, BPID in the LS 16 bits */ ++ u32 bpid_offset; ++ u32 frc; /* frame context */ ++ /* "err", "va", "cbmt", "asal", [...] */ ++ u32 ctrl; ++ /* flow context */ ++ u32 flc_lo; ++ u32 flc_hi; ++ } simple; ++ }; ++}; ++ ++enum dpaa2_fd_format { ++ dpaa2_fd_single = 0, ++ dpaa2_fd_list, ++ dpaa2_fd_sg ++}; ++ ++/* Accessors for SG entry fields ++ * ++ * These setters and getters assume little endian format. For converting ++ * between LE and cpu endianness, the specific conversion functions must be ++ * called before the SGE contents are accessed by the core (on Rx), ++ * respectively before the SG table is sent to hardware (on Tx) ++ */ ++ ++/** ++ * dpaa2_fd_get_addr() - get the addr field of frame descriptor ++ * @fd: the given frame descriptor. ++ * ++ * Return the address in the frame descriptor. ++ */ ++static inline dma_addr_t dpaa2_fd_get_addr(const struct dpaa2_fd *fd) ++{ ++ return (dma_addr_t)((((uint64_t)fd->simple.addr_hi) << 32) ++ + fd->simple.addr_lo); ++} ++ ++/** ++ * dpaa2_fd_set_addr() - Set the addr field of frame descriptor ++ * @fd: the given frame descriptor. ++ * @addr: the address needs to be set in frame descriptor. ++ */ ++static inline void dpaa2_fd_set_addr(struct dpaa2_fd *fd, dma_addr_t addr) ++{ ++ fd->simple.addr_hi = upper_32_bits(addr); ++ fd->simple.addr_lo = lower_32_bits(addr); ++} ++ ++/** ++ * dpaa2_fd_get_frc() - Get the frame context in the frame descriptor ++ * @fd: the given frame descriptor. ++ * ++ * Return the frame context field in the frame descriptor. ++ */ ++static inline u32 dpaa2_fd_get_frc(const struct dpaa2_fd *fd) ++{ ++ return fd->simple.frc; ++} ++ ++/** ++ * dpaa2_fd_set_frc() - Set the frame context in the frame descriptor ++ * @fd: the given frame descriptor. ++ * @frc: the frame context needs to be set in frame descriptor. ++ */ ++static inline void dpaa2_fd_set_frc(struct dpaa2_fd *fd, u32 frc) ++{ ++ fd->simple.frc = frc; ++} ++ ++/** ++ * dpaa2_fd_get_flc() - Get the flow context in the frame descriptor ++ * @fd: the given frame descriptor. ++ * ++ * Return the flow context in the frame descriptor. ++ */ ++static inline dma_addr_t dpaa2_fd_get_flc(const struct dpaa2_fd *fd) ++{ ++ return (dma_addr_t)((((uint64_t)fd->simple.flc_hi) << 32) + ++ fd->simple.flc_lo); ++} ++ ++/** ++ * dpaa2_fd_set_flc() - Set the flow context field of frame descriptor ++ * @fd: the given frame descriptor. ++ * @flc_addr: the flow context needs to be set in frame descriptor. ++ */ ++static inline void dpaa2_fd_set_flc(struct dpaa2_fd *fd, dma_addr_t flc_addr) ++{ ++ fd->simple.flc_hi = upper_32_bits(flc_addr); ++ fd->simple.flc_lo = lower_32_bits(flc_addr); ++} ++ ++/** ++ * dpaa2_fd_get_len() - Get the length in the frame descriptor ++ * @fd: the given frame descriptor. ++ * ++ * Return the length field in the frame descriptor. ++ */ ++static inline u32 dpaa2_fd_get_len(const struct dpaa2_fd *fd) ++{ ++ return fd->simple.len; ++} ++ ++/** ++ * dpaa2_fd_set_len() - Set the length field of frame descriptor ++ * @fd: the given frame descriptor. ++ * @len: the length needs to be set in frame descriptor. ++ */ ++static inline void dpaa2_fd_set_len(struct dpaa2_fd *fd, u32 len) ++{ ++ fd->simple.len = len; ++} ++ ++/** ++ * dpaa2_fd_get_offset() - Get the offset field in the frame descriptor ++ * @fd: the given frame descriptor. ++ * ++ * Return the offset. ++ */ ++static inline uint16_t dpaa2_fd_get_offset(const struct dpaa2_fd *fd) ++{ ++ return (uint16_t)(fd->simple.bpid_offset >> 16) & 0x0FFF; ++} ++ ++/** ++ * dpaa2_fd_set_offset() - Set the offset field of frame descriptor ++ * ++ * @fd: the given frame descriptor. ++ * @offset: the offset needs to be set in frame descriptor. ++ */ ++static inline void dpaa2_fd_set_offset(struct dpaa2_fd *fd, uint16_t offset) ++{ ++ fd->simple.bpid_offset &= 0xF000FFFF; ++ fd->simple.bpid_offset |= (u32)offset << 16; ++} ++ ++/** ++ * dpaa2_fd_get_format() - Get the format field in the frame descriptor ++ * @fd: the given frame descriptor. ++ * ++ * Return the format. ++ */ ++static inline enum dpaa2_fd_format dpaa2_fd_get_format( ++ const struct dpaa2_fd *fd) ++{ ++ return (enum dpaa2_fd_format)((fd->simple.bpid_offset >> 28) & 0x3); ++} ++ ++/** ++ * dpaa2_fd_set_format() - Set the format field of frame descriptor ++ * ++ * @fd: the given frame descriptor. ++ * @format: the format needs to be set in frame descriptor. ++ */ ++static inline void dpaa2_fd_set_format(struct dpaa2_fd *fd, ++ enum dpaa2_fd_format format) ++{ ++ fd->simple.bpid_offset &= 0xCFFFFFFF; ++ fd->simple.bpid_offset |= (u32)format << 28; ++} ++ ++/** ++ * dpaa2_fd_get_bpid() - Get the bpid field in the frame descriptor ++ * @fd: the given frame descriptor. ++ * ++ * Return the bpid. ++ */ ++static inline uint16_t dpaa2_fd_get_bpid(const struct dpaa2_fd *fd) ++{ ++ return (uint16_t)(fd->simple.bpid_offset & 0xFFFF); ++} ++ ++/** ++ * dpaa2_fd_set_bpid() - Set the bpid field of frame descriptor ++ * ++ * @fd: the given frame descriptor. ++ * @bpid: the bpid needs to be set in frame descriptor. ++ */ ++static inline void dpaa2_fd_set_bpid(struct dpaa2_fd *fd, uint16_t bpid) ++{ ++ fd->simple.bpid_offset &= 0xFFFF0000; ++ fd->simple.bpid_offset |= (u32)bpid; ++} ++ ++/** ++ * struct dpaa2_sg_entry - the scatter-gathering structure ++ * @addr_lo: the lower 32bit of address ++ * @addr_hi: the upper 32bit of address ++ * @len: the length in this sg entry. ++ * @bpid_offset: offset in the MS 16 bits, BPID in the LS 16 bits. ++ */ ++struct dpaa2_sg_entry { ++ u32 addr_lo; ++ u32 addr_hi; ++ u32 len; ++ u32 bpid_offset; ++}; ++ ++enum dpaa2_sg_format { ++ dpaa2_sg_single = 0, ++ dpaa2_sg_frame_data, ++ dpaa2_sg_sgt_ext ++}; ++ ++/** ++ * dpaa2_sg_get_addr() - Get the address from SG entry ++ * @sg: the given scatter-gathering object. ++ * ++ * Return the address. ++ */ ++static inline dma_addr_t dpaa2_sg_get_addr(const struct dpaa2_sg_entry *sg) ++{ ++ return (dma_addr_t)((((u64)sg->addr_hi) << 32) + sg->addr_lo); ++} ++ ++/** ++ * dpaa2_sg_set_addr() - Set the address in SG entry ++ * @sg: the given scatter-gathering object. ++ * @addr: the address to be set. ++ */ ++static inline void dpaa2_sg_set_addr(struct dpaa2_sg_entry *sg, dma_addr_t addr) ++{ ++ sg->addr_hi = upper_32_bits(addr); ++ sg->addr_lo = lower_32_bits(addr); ++} ++ ++ ++static inline bool dpaa2_sg_short_len(const struct dpaa2_sg_entry *sg) ++{ ++ return (sg->bpid_offset >> 30) & 0x1; ++} ++ ++/** ++ * dpaa2_sg_get_len() - Get the length in SG entry ++ * @sg: the given scatter-gathering object. ++ * ++ * Return the length. ++ */ ++static inline u32 dpaa2_sg_get_len(const struct dpaa2_sg_entry *sg) ++{ ++ if (dpaa2_sg_short_len(sg)) ++ return sg->len & 0x1FFFF; ++ return sg->len; ++} ++ ++/** ++ * dpaa2_sg_set_len() - Set the length in SG entry ++ * @sg: the given scatter-gathering object. ++ * @len: the length to be set. ++ */ ++static inline void dpaa2_sg_set_len(struct dpaa2_sg_entry *sg, u32 len) ++{ ++ sg->len = len; ++} ++ ++/** ++ * dpaa2_sg_get_offset() - Get the offset in SG entry ++ * @sg: the given scatter-gathering object. ++ * ++ * Return the offset. ++ */ ++static inline u16 dpaa2_sg_get_offset(const struct dpaa2_sg_entry *sg) ++{ ++ return (u16)(sg->bpid_offset >> 16) & 0x0FFF; ++} ++ ++/** ++ * dpaa2_sg_set_offset() - Set the offset in SG entry ++ * @sg: the given scatter-gathering object. ++ * @offset: the offset to be set. ++ */ ++static inline void dpaa2_sg_set_offset(struct dpaa2_sg_entry *sg, ++ u16 offset) ++{ ++ sg->bpid_offset &= 0xF000FFFF; ++ sg->bpid_offset |= (u32)offset << 16; ++} ++ ++/** ++ * dpaa2_sg_get_format() - Get the SG format in SG entry ++ * @sg: the given scatter-gathering object. ++ * ++ * Return the format. ++ */ ++static inline enum dpaa2_sg_format ++ dpaa2_sg_get_format(const struct dpaa2_sg_entry *sg) ++{ ++ return (enum dpaa2_sg_format)((sg->bpid_offset >> 28) & 0x3); ++} ++ ++/** ++ * dpaa2_sg_set_format() - Set the SG format in SG entry ++ * @sg: the given scatter-gathering object. ++ * @format: the format to be set. ++ */ ++static inline void dpaa2_sg_set_format(struct dpaa2_sg_entry *sg, ++ enum dpaa2_sg_format format) ++{ ++ sg->bpid_offset &= 0xCFFFFFFF; ++ sg->bpid_offset |= (u32)format << 28; ++} ++ ++/** ++ * dpaa2_sg_get_bpid() - Get the buffer pool id in SG entry ++ * @sg: the given scatter-gathering object. ++ * ++ * Return the bpid. ++ */ ++static inline u16 dpaa2_sg_get_bpid(const struct dpaa2_sg_entry *sg) ++{ ++ return (u16)(sg->bpid_offset & 0x3FFF); ++} ++ ++/** ++ * dpaa2_sg_set_bpid() - Set the buffer pool id in SG entry ++ * @sg: the given scatter-gathering object. ++ * @bpid: the bpid to be set. ++ */ ++static inline void dpaa2_sg_set_bpid(struct dpaa2_sg_entry *sg, u16 bpid) ++{ ++ sg->bpid_offset &= 0xFFFFC000; ++ sg->bpid_offset |= (u32)bpid; ++} ++ ++/** ++ * dpaa2_sg_is_final() - Check final bit in SG entry ++ * @sg: the given scatter-gathering object. ++ * ++ * Return bool. ++ */ ++static inline bool dpaa2_sg_is_final(const struct dpaa2_sg_entry *sg) ++{ ++ return !!(sg->bpid_offset >> 31); ++} ++ ++/** ++ * dpaa2_sg_set_final() - Set the final bit in SG entry ++ * @sg: the given scatter-gathering object. ++ * @final: the final boolean to be set. ++ */ ++static inline void dpaa2_sg_set_final(struct dpaa2_sg_entry *sg, bool final) ++{ ++ sg->bpid_offset &= 0x7FFFFFFF; ++ sg->bpid_offset |= (u32)final << 31; ++} ++ ++/* Endianness conversion helper functions ++ * The accelerator drivers which construct / read scatter gather entries ++ * need to call these in order to account for endianness mismatches between ++ * hardware and cpu ++ */ ++#ifdef __BIG_ENDIAN ++/** ++ * dpaa2_sg_cpu_to_le() - convert scatter gather entry from native cpu ++ * format little endian format. ++ * @sg: the given scatter gather entry. ++ */ ++static inline void dpaa2_sg_cpu_to_le(struct dpaa2_sg_entry *sg) ++{ ++ uint32_t *p = (uint32_t *)sg; ++ int i; ++ ++ for (i = 0; i < sizeof(*sg) / sizeof(u32); i++) ++ cpu_to_le32s(p++); ++} ++ ++/** ++ * dpaa2_sg_le_to_cpu() - convert scatter gather entry from little endian ++ * format to native cpu format. ++ * @sg: the given scatter gather entry. ++ */ ++static inline void dpaa2_sg_le_to_cpu(struct dpaa2_sg_entry *sg) ++{ ++ uint32_t *p = (uint32_t *)sg; ++ int i; ++ ++ for (i = 0; i < sizeof(*sg) / sizeof(u32); i++) ++ le32_to_cpus(p++); ++} ++#else ++#define dpaa2_sg_cpu_to_le(sg) ++#define dpaa2_sg_le_to_cpu(sg) ++#endif /* __BIG_ENDIAN */ ++ ++ ++/** ++ * struct dpaa2_fl_entry - structure for frame list entry. ++ * @addr_lo: the lower 32bit of address ++ * @addr_hi: the upper 32bit of address ++ * @len: the length in this sg entry. ++ * @bpid_offset: offset in the MS 16 bits, BPID in the LS 16 bits. ++ * @frc: frame context ++ * @ctrl: the 32bit control bits including dd, sc,... va, err. ++ * @flc_lo: the lower 32bit of flow context. ++ * @flc_hi: the upper 32bits of flow context. ++ * ++ * Frame List Entry (FLE) ++ * Identical to dpaa2_fd.simple layout, but some bits are different ++ */ ++struct dpaa2_fl_entry { ++ u32 addr_lo; ++ u32 addr_hi; ++ u32 len; ++ u32 bpid_offset; ++ u32 frc; ++ u32 ctrl; ++ u32 flc_lo; ++ u32 flc_hi; ++}; ++ ++enum dpaa2_fl_format { ++ dpaa2_fl_single = 0, ++ dpaa2_fl_res, ++ dpaa2_fl_sg ++}; ++ ++/** ++ * dpaa2_fl_get_addr() - Get address in the frame list entry ++ * @fle: the given frame list entry. ++ * ++ * Return address for the get function. ++ */ ++static inline dma_addr_t dpaa2_fl_get_addr(const struct dpaa2_fl_entry *fle) ++{ ++ return (dma_addr_t)((((uint64_t)fle->addr_hi) << 32) + fle->addr_lo); ++} ++ ++/** ++ * dpaa2_fl_set_addr() - Set the address in the frame list entry ++ * @fle: the given frame list entry. ++ * @addr: the address needs to be set. ++ * ++ */ ++static inline void dpaa2_fl_set_addr(struct dpaa2_fl_entry *fle, ++ dma_addr_t addr) ++{ ++ fle->addr_hi = upper_32_bits(addr); ++ fle->addr_lo = lower_32_bits(addr); ++} ++ ++/** ++ * dpaa2_fl_get_flc() - Get the flow context in the frame list entry ++ * @fle: the given frame list entry. ++ * ++ * Return flow context for the get function. ++ */ ++static inline dma_addr_t dpaa2_fl_get_flc(const struct dpaa2_fl_entry *fle) ++{ ++ return (dma_addr_t)((((uint64_t)fle->flc_hi) << 32) + fle->flc_lo); ++} ++ ++/** ++ * dpaa2_fl_set_flc() - Set the flow context in the frame list entry ++ * @fle: the given frame list entry. ++ * @flc_addr: the flow context address needs to be set. ++ * ++ */ ++static inline void dpaa2_fl_set_flc(struct dpaa2_fl_entry *fle, ++ dma_addr_t flc_addr) ++{ ++ fle->flc_hi = upper_32_bits(flc_addr); ++ fle->flc_lo = lower_32_bits(flc_addr); ++} ++ ++/** ++ * dpaa2_fl_get_len() - Get the length in the frame list entry ++ * @fle: the given frame list entry. ++ * ++ * Return length for the get function. ++ */ ++static inline u32 dpaa2_fl_get_len(const struct dpaa2_fl_entry *fle) ++{ ++ return fle->len; ++} ++ ++/** ++ * dpaa2_fl_set_len() - Set the length in the frame list entry ++ * @fle: the given frame list entry. ++ * @len: the length needs to be set. ++ * ++ */ ++static inline void dpaa2_fl_set_len(struct dpaa2_fl_entry *fle, u32 len) ++{ ++ fle->len = len; ++} ++ ++/** ++ * dpaa2_fl_get_offset() - Get/Set the offset in the frame list entry ++ * @fle: the given frame list entry. ++ * ++ * Return offset for the get function. ++ */ ++static inline uint16_t dpaa2_fl_get_offset(const struct dpaa2_fl_entry *fle) ++{ ++ return (uint16_t)(fle->bpid_offset >> 16) & 0x0FFF; ++} ++ ++/** ++ * dpaa2_fl_set_offset() - Set the offset in the frame list entry ++ * @fle: the given frame list entry. ++ * @offset: the offset needs to be set. ++ * ++ */ ++static inline void dpaa2_fl_set_offset(struct dpaa2_fl_entry *fle, ++ uint16_t offset) ++{ ++ fle->bpid_offset &= 0xF000FFFF; ++ fle->bpid_offset |= (u32)(offset & 0x0FFF) << 16; ++} ++ ++/** ++ * dpaa2_fl_get_format() - Get the format in the frame list entry ++ * @fle: the given frame list entry. ++ * ++ * Return frame list format for the get function. ++ */ ++static inline enum dpaa2_fl_format dpaa2_fl_get_format( ++ const struct dpaa2_fl_entry *fle) ++{ ++ return (enum dpaa2_fl_format)((fle->bpid_offset >> 28) & 0x3); ++} ++ ++/** ++ * dpaa2_fl_set_format() - Set the format in the frame list entry ++ * @fle: the given frame list entry. ++ * @format: the frame list format needs to be set. ++ * ++ */ ++static inline void dpaa2_fl_set_format(struct dpaa2_fl_entry *fle, ++ enum dpaa2_fl_format format) ++{ ++ fle->bpid_offset &= 0xCFFFFFFF; ++ fle->bpid_offset |= (u32)(format & 0x3) << 28; ++} ++ ++/** ++ * dpaa2_fl_get_bpid() - Get the buffer pool id in the frame list entry ++ * @fle: the given frame list entry. ++ * ++ * Return bpid for the get function. ++ */ ++static inline uint16_t dpaa2_fl_get_bpid(const struct dpaa2_fl_entry *fle) ++{ ++ return (uint16_t)(fle->bpid_offset & 0x3FFF); ++} ++ ++/** ++ * dpaa2_fl_set_bpid() - Set the buffer pool id in the frame list entry ++ * @fle: the given frame list entry. ++ * @bpid: the buffer pool id needs to be set. ++ * ++ */ ++static inline void dpaa2_fl_set_bpid(struct dpaa2_fl_entry *fle, uint16_t bpid) ++{ ++ fle->bpid_offset &= 0xFFFFC000; ++ fle->bpid_offset |= (u32)bpid; ++} ++ ++/** dpaa2_fl_is_final() - check the final bit is set or not in the frame list. ++ * @fle: the given frame list entry. ++ * ++ * Return final bit settting. ++ */ ++static inline bool dpaa2_fl_is_final(const struct dpaa2_fl_entry *fle) ++{ ++ return !!(fle->bpid_offset >> 31); ++} ++ ++/** ++ * dpaa2_fl_set_final() - Set the final bit in the frame list entry ++ * @fle: the given frame list entry. ++ * @final: the final bit needs to be set. ++ * ++ */ ++static inline void dpaa2_fl_set_final(struct dpaa2_fl_entry *fle, bool final) ++{ ++ fle->bpid_offset &= 0x7FFFFFFF; ++ fle->bpid_offset |= (u32)final << 31; ++} ++ ++/** ++ * struct dpaa2_dq - the qman result structure ++ * @dont_manipulate_directly: the 16 32bit data to represent the whole ++ * possible qman dequeue result. ++ * ++ * When frames are dequeued, the FDs show up inside "dequeue" result structures ++ * (if at all, not all dequeue results contain valid FDs). This structure type ++ * is intentionally defined without internal detail, and the only reason it ++ * isn't declared opaquely (without size) is to allow the user to provide ++ * suitably-sized (and aligned) memory for these entries. ++ */ ++struct dpaa2_dq { ++ uint32_t dont_manipulate_directly[16]; ++}; ++ ++/* Parsing frame dequeue results */ ++/* FQ empty */ ++#define DPAA2_DQ_STAT_FQEMPTY 0x80 ++/* FQ held active */ ++#define DPAA2_DQ_STAT_HELDACTIVE 0x40 ++/* FQ force eligible */ ++#define DPAA2_DQ_STAT_FORCEELIGIBLE 0x20 ++/* Valid frame */ ++#define DPAA2_DQ_STAT_VALIDFRAME 0x10 ++/* FQ ODP enable */ ++#define DPAA2_DQ_STAT_ODPVALID 0x04 ++/* Volatile dequeue */ ++#define DPAA2_DQ_STAT_VOLATILE 0x02 ++/* volatile dequeue command is expired */ ++#define DPAA2_DQ_STAT_EXPIRED 0x01 ++ ++/** ++ * dpaa2_dq_flags() - Get the stat field of dequeue response ++ * @dq: the dequeue result. ++ */ ++uint32_t dpaa2_dq_flags(const struct dpaa2_dq *dq); ++ ++/** ++ * dpaa2_dq_is_pull() - Check whether the dq response is from a pull ++ * command. ++ * @dq: the dequeue result. ++ * ++ * Return 1 for volatile(pull) dequeue, 0 for static dequeue. ++ */ ++static inline int dpaa2_dq_is_pull(const struct dpaa2_dq *dq) ++{ ++ return (int)(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_VOLATILE); ++} ++ ++/** ++ * dpaa2_dq_is_pull_complete() - Check whether the pull command is completed. ++ * @dq: the dequeue result. ++ * ++ * Return boolean. ++ */ ++static inline int dpaa2_dq_is_pull_complete( ++ const struct dpaa2_dq *dq) ++{ ++ return (int)(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_EXPIRED); ++} ++ ++/** ++ * dpaa2_dq_seqnum() - Get the seqnum field in dequeue response ++ * seqnum is valid only if VALIDFRAME flag is TRUE ++ * @dq: the dequeue result. ++ * ++ * Return seqnum. ++ */ ++uint16_t dpaa2_dq_seqnum(const struct dpaa2_dq *dq); ++ ++/** ++ * dpaa2_dq_odpid() - Get the seqnum field in dequeue response ++ * odpid is valid only if ODPVAILD flag is TRUE. ++ * @dq: the dequeue result. ++ * ++ * Return odpid. ++ */ ++uint16_t dpaa2_dq_odpid(const struct dpaa2_dq *dq); ++ ++/** ++ * dpaa2_dq_fqid() - Get the fqid in dequeue response ++ * @dq: the dequeue result. ++ * ++ * Return fqid. ++ */ ++uint32_t dpaa2_dq_fqid(const struct dpaa2_dq *dq); ++ ++/** ++ * dpaa2_dq_byte_count() - Get the byte count in dequeue response ++ * @dq: the dequeue result. ++ * ++ * Return the byte count remaining in the FQ. ++ */ ++uint32_t dpaa2_dq_byte_count(const struct dpaa2_dq *dq); ++ ++/** ++ * dpaa2_dq_frame_count() - Get the frame count in dequeue response ++ * @dq: the dequeue result. ++ * ++ * Return the frame count remaining in the FQ. ++ */ ++uint32_t dpaa2_dq_frame_count(const struct dpaa2_dq *dq); ++ ++/** ++ * dpaa2_dq_fd_ctx() - Get the frame queue context in dequeue response ++ * @dq: the dequeue result. ++ * ++ * Return the frame queue context. ++ */ ++uint64_t dpaa2_dq_fqd_ctx(const struct dpaa2_dq *dq); ++ ++/** ++ * dpaa2_dq_fd() - Get the frame descriptor in dequeue response ++ * @dq: the dequeue result. ++ * ++ * Return the frame descriptor. ++ */ ++const struct dpaa2_fd *dpaa2_dq_fd(const struct dpaa2_dq *dq); ++ ++#endif /* __FSL_DPAA2_FD_H */ +--- /dev/null ++++ b/drivers/staging/fsl-mc/include/fsl_dpaa2_io.h +@@ -0,0 +1,619 @@ ++/* Copyright 2014 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPAA2_IO_H ++#define __FSL_DPAA2_IO_H ++ ++#include "fsl_dpaa2_fd.h" ++ ++struct dpaa2_io; ++struct dpaa2_io_store; ++ ++/** ++ * DOC: DPIO Service Management ++ * ++ * The DPIO service provides APIs for users to interact with the datapath ++ * by enqueueing and dequeing frame descriptors. ++ * ++ * The following set of APIs can be used to enqueue and dequeue frames ++ * as well as producing notification callbacks when data is available ++ * for dequeue. ++ */ ++ ++/** ++ * struct dpaa2_io_desc - The DPIO descriptor. ++ * @receives_notifications: Use notificaton mode. ++ * @has_irq: use irq-based proessing. ++ * @will_poll: use poll processing. ++ * @has_8prio: set for channel with 8 priority WQs. ++ * @cpu: the cpu index that at least interrupt handlers will execute on. ++ * @stash_affinity: the stash affinity for this portal favour 'cpu' ++ * @regs_cena: the cache enabled regs. ++ * @regs_cinh: the cache inhibited regs. ++ * @dpio_id: The dpio index. ++ * @qman_version: the qman version ++ * ++ * Describe the attributes and features of the DPIO object. ++ */ ++struct dpaa2_io_desc { ++ /* non-zero iff the DPIO has a channel */ ++ int receives_notifications; ++ /* non-zero if the DPIO portal interrupt is handled. If so, the ++ * caller/OS handles the interrupt and calls dpaa2_io_service_irq(). */ ++ int has_irq; ++ /* non-zero if the caller/OS is prepared to called the ++ * dpaa2_io_service_poll() routine as part of its run-to-completion (or ++ * scheduling) loop. If so, the DPIO service may dynamically switch some ++ * of its processing between polling-based and irq-based. It is illegal ++ * combination to have (!has_irq && !will_poll). */ ++ int will_poll; ++ /* ignored unless 'receives_notifications'. Non-zero iff the channel has ++ * 8 priority WQs, otherwise the channel has 2. */ ++ int has_8prio; ++ /* the cpu index that at least interrupt handlers will execute on. And ++ * if 'stash_affinity' is non-zero, the cache targeted by stash ++ * transactions is affine to this cpu. */ ++ int cpu; ++ /* non-zero if stash transactions for this portal favour 'cpu' over ++ * other CPUs. (Eg. zero if there's no stashing, or stashing is to ++ * shared cache.) */ ++ int stash_affinity; ++ /* Caller-provided flags, determined by bus-scanning and/or creation of ++ * DPIO objects via MC commands. */ ++ void *regs_cena; ++ void *regs_cinh; ++ int dpio_id; ++ uint32_t qman_version; ++}; ++ ++/** ++ * dpaa2_io_create() - create a dpaa2_io object. ++ * @desc: the dpaa2_io descriptor ++ * ++ * Activates a "struct dpaa2_io" corresponding to the given config of an actual ++ * DPIO object. This handle can be used on it's own (like a one-portal "DPIO ++ * service") or later be added to a service-type "struct dpaa2_io" object. Note, ++ * the information required on 'cfg' is copied so the caller is free to do as ++ * they wish with the input parameter upon return. ++ * ++ * Return a valid dpaa2_io object for success, or NULL for failure. ++ */ ++struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc); ++ ++/** ++ * dpaa2_io_create_service() - Create an (initially empty) DPIO service. ++ * ++ * Return a valid dpaa2_io object for success, or NULL for failure. ++ */ ++struct dpaa2_io *dpaa2_io_create_service(void); ++ ++/** ++ * dpaa2_io_default_service() - Use the driver's own global (and initially ++ * empty) DPIO service. ++ * ++ * This increments the reference count, so don't forget to use dpaa2_io_down() ++ * for each time this function is called. ++ * ++ * Return a valid dpaa2_io object for success, or NULL for failure. ++ */ ++struct dpaa2_io *dpaa2_io_default_service(void); ++ ++/** ++ * dpaa2_io_down() - release the dpaa2_io object. ++ * @d: the dpaa2_io object to be released. ++ * ++ * The "struct dpaa2_io" type can represent an individual DPIO object (as ++ * described by "struct dpaa2_io_desc") or an instance of a "DPIO service", ++ * which can be used to group/encapsulate multiple DPIO objects. In all cases, ++ * each handle obtained should be released using this function. ++ */ ++void dpaa2_io_down(struct dpaa2_io *d); ++ ++/** ++ * dpaa2_io_service_add() - Add the given DPIO object to the given DPIO service. ++ * @service: the given DPIO service. ++ * @obj: the given DPIO object. ++ * ++ * 'service' must have been created by dpaa2_io_create_service() and 'obj' ++ * must have been created by dpaa2_io_create(). This increments the reference ++ * count on the object that 'obj' refers to, so the user could call ++ * dpaa2_io_down(obj) after this and the object will persist within the service ++ * (and will be destroyed when the service is destroyed). ++ * ++ * Return 0 for success, or -EINVAL for failure. ++ */ ++int dpaa2_io_service_add(struct dpaa2_io *service, struct dpaa2_io *obj); ++ ++/** ++ * dpaa2_io_get_descriptor() - Get the DPIO descriptor of the given DPIO object. ++ * @obj: the given DPIO object. ++ * @desc: the returned DPIO descriptor. ++ * ++ * This function will return failure if the given dpaa2_io struct represents a ++ * service rather than an individual DPIO object, otherwise it returns zero and ++ * the given 'cfg' structure is filled in. ++ * ++ * Return 0 for success, or -EINVAL for failure. ++ */ ++int dpaa2_io_get_descriptor(struct dpaa2_io *obj, struct dpaa2_io_desc *desc); ++ ++/** ++ * dpaa2_io_poll() - Process any notifications and h/w-initiated events that ++ * are polling-driven. ++ * @obj: the given DPIO object. ++ * ++ * Obligatory for DPIO objects that have dpaa2_io_desc::will_poll non-zero. ++ * ++ * Return 0 for success, or -EINVAL for failure. ++ */ ++int dpaa2_io_poll(struct dpaa2_io *obj); ++ ++/** ++ * dpaa2_io_irq() - Process any notifications and h/w-initiated events that are ++ * irq-driven. ++ * @obj: the given DPIO object. ++ * ++ * Obligatory for DPIO objects that have dpaa2_io_desc::has_irq non-zero. ++ * ++ * Return IRQ_HANDLED for success, or -EINVAL for failure. ++ */ ++int dpaa2_io_irq(struct dpaa2_io *obj); ++ ++/** ++ * dpaa2_io_pause_poll() - Used to stop polling. ++ * @obj: the given DPIO object. ++ * ++ * If a polling application is going to stop polling for a period of time and ++ * supports interrupt processing, it can call this function to convert all ++ * processing to IRQ. (Eg. when sleeping.) ++ * ++ * Return -EINVAL. ++ */ ++int dpaa2_io_pause_poll(struct dpaa2_io *obj); ++ ++/** ++ * dpaa2_io_resume_poll() - Resume polling ++ * @obj: the given DPIO object. ++ * ++ * Return -EINVAL. ++ */ ++int dpaa2_io_resume_poll(struct dpaa2_io *obj); ++ ++/** ++ * dpaa2_io_service_notifications() - Get a mask of cpus that the DPIO service ++ * can receive notifications on. ++ * @s: the given DPIO object. ++ * @mask: the mask of cpus. ++ * ++ * Note that this is a run-time snapshot. If things like cpu-hotplug are ++ * supported in the target system, then an attempt to register notifications ++ * for a cpu that appears present in the given mask might fail if that cpu has ++ * gone offline in the mean time. ++ */ ++void dpaa2_io_service_notifications(struct dpaa2_io *s, cpumask_t *mask); ++ ++/** ++ * dpaa2_io_service_stashing - Get a mask of cpus that the DPIO service has stash ++ * affinity to. ++ * @s: the given DPIO object. ++ * @mask: the mask of cpus. ++ */ ++void dpaa2_io_service_stashing(struct dpaa2_io *s, cpumask_t *mask); ++ ++/** ++ * dpaa2_io_service_nonaffine() - Check the DPIO service's cpu affinity ++ * for stashing. ++ * @s: the given DPIO object. ++ * ++ * Return a boolean, whether or not the DPIO service has resources that have no ++ * particular cpu affinity for stashing. (Useful to know if you wish to operate ++ * on CPUs that the service has no affinity to, you would choose to use ++ * resources that are neutral, rather than affine to a different CPU.) Unlike ++ * other service-specific APIs, this one doesn't return an error if it is passed ++ * a non-service object. So don't do it. ++ */ ++int dpaa2_io_service_has_nonaffine(struct dpaa2_io *s); ++ ++/*************************/ ++/* Notification handling */ ++/*************************/ ++ ++/** ++ * struct dpaa2_io_notification_ctx - The DPIO notification context structure. ++ * @cb: the callback to be invoked when the notification arrives. ++ * @is_cdan: Zero/FALSE for FQDAN, non-zero/TRUE for CDAN. ++ * @id: FQID or channel ID, needed for rearm. ++ * @desired_cpu: the cpu on which the notifications will show up. ++ * @actual_cpu: the cpu the notification actually shows up. ++ * @migration_cb: callback function used for migration. ++ * @dpio_id: the dpio index. ++ * @qman64: the 64-bit context value shows up in the FQDAN/CDAN. ++ * @node: the list node. ++ * @dpio_private: the dpio object internal to dpio_service. ++ * ++ * When a FQDAN/CDAN registration is made (eg. by DPNI/DPCON/DPAI code), a ++ * context of the following type is used. The caller can embed it within a ++ * larger structure in order to add state that is tracked along with the ++ * notification (this may be useful when callbacks are invoked that pass this ++ * notification context as a parameter). ++ */ ++struct dpaa2_io_notification_ctx { ++ void (*cb)(struct dpaa2_io_notification_ctx *); ++ int is_cdan; ++ uint32_t id; ++ /* This specifies which cpu the user wants notifications to show up on ++ * (ie. to execute 'cb'). If notification-handling on that cpu is not ++ * available at the time of notification registration, the registration ++ * will fail. */ ++ int desired_cpu; ++ /* If the target platform supports cpu-hotplug or other features ++ * (related to power-management, one would expect) that can migrate IRQ ++ * handling of a given DPIO object, then this value will potentially be ++ * different to 'desired_cpu' at run-time. */ ++ int actual_cpu; ++ /* And if migration does occur and this callback is non-NULL, it will ++ * be invoked prior to any futher notification callbacks executing on ++ * 'newcpu'. Note that 'oldcpu' is what 'actual_cpu' was prior to the ++ * migration, and 'newcpu' is what it is now. Both could conceivably be ++ * different to 'desired_cpu'. */ ++ void (*migration_cb)(struct dpaa2_io_notification_ctx *, ++ int oldcpu, int newcpu); ++ /* These are returned from dpaa2_io_service_register(). ++ * 'dpio_id' is the dpaa2_io_desc::dpio_id value of the DPIO object that ++ * has been selected by the service for receiving the notifications. The ++ * caller can use this value in the MC command that attaches the FQ (or ++ * channel) of their DPNI (or DPCON, respectively) to this DPIO for ++ * notification-generation. ++ * 'qman64' is the 64-bit context value that needs to be sent in the ++ * same MC command in order to be programmed into the FQ or channel - ++ * this is the 64-bit value that shows up in the FQDAN/CDAN messages to ++ * the DPIO object, and the DPIO service specifies this value back to ++ * the caller so that the notifications that show up will be ++ * comprensible/demux-able to the DPIO service. */ ++ int dpio_id; ++ uint64_t qman64; ++ /* These fields are internal to the DPIO service once the context is ++ * registered. TBD: may require more internal state fields. */ ++ struct list_head node; ++ void *dpio_private; ++}; ++ ++/** ++ * dpaa2_io_service_register() - Prepare for servicing of FQDAN or CDAN ++ * notifications on the given DPIO service. ++ * @service: the given DPIO service. ++ * @ctx: the notification context. ++ * ++ * The MC command to attach the caller's DPNI/DPCON/DPAI device to a ++ * DPIO object is performed after this function is called. In that way, (a) the ++ * DPIO service is "ready" to handle a notification arrival (which might happen ++ * before the "attach" command to MC has returned control of execution back to ++ * the caller), and (b) the DPIO service can provide back to the caller the ++ * 'dpio_id' and 'qman64' parameters that it should pass along in the MC command ++ * in order for the DPNI/DPCON/DPAI resources to be configured to produce the ++ * right notification fields to the DPIO service. ++ * ++ * Return 0 for success, or -ENODEV for failure. ++ */ ++int dpaa2_io_service_register(struct dpaa2_io *service, ++ struct dpaa2_io_notification_ctx *ctx); ++ ++/** ++ * dpaa2_io_service_deregister - The opposite of 'register'. ++ * @service: the given DPIO service. ++ * @ctx: the notification context. ++ * ++ * Note that 'register' should be called *before* ++ * making the MC call to attach the notification-producing device to the ++ * notification-handling DPIO service, the 'unregister' function should be ++ * called *after* making the MC call to detach the notification-producing ++ * device. ++ * ++ * Return 0 for success. ++ */ ++int dpaa2_io_service_deregister(struct dpaa2_io *service, ++ struct dpaa2_io_notification_ctx *ctx); ++ ++/** ++ * dpaa2_io_service_rearm() - Rearm the notification for the given DPIO service. ++ * @service: the given DPIO service. ++ * @ctx: the notification context. ++ * ++ * Once a FQDAN/CDAN has been produced, the corresponding FQ/channel is ++ * considered "disarmed". Ie. the user can issue pull dequeue operations on that ++ * traffic source for as long as it likes. Eventually it may wish to "rearm" ++ * that source to allow it to produce another FQDAN/CDAN, that's what this ++ * function achieves. ++ * ++ * Return 0 for success, or -ENODEV if no service available, -EBUSY/-EIO for not ++ * being able to implement the rearm the notifiaton due to setting CDAN or ++ * scheduling fq. ++ */ ++int dpaa2_io_service_rearm(struct dpaa2_io *service, ++ struct dpaa2_io_notification_ctx *ctx); ++ ++/** ++ * dpaa2_io_from_registration() - Get the DPIO object from the given notification ++ * context. ++ * @ctx: the given notifiation context. ++ * @ret: the returned DPIO object. ++ * ++ * Like 'dpaa2_io_service_get_persistent()' (see below), except that the ++ * returned handle is not selected based on a 'cpu' argument, but is the same ++ * DPIO object that the given notification context is registered against. The ++ * returned handle carries a reference count, so a corresponding dpaa2_io_down() ++ * would be required when the reference is no longer needed. ++ * ++ * Return 0 for success, or -EINVAL for failure. ++ */ ++int dpaa2_io_from_registration(struct dpaa2_io_notification_ctx *ctx, ++ struct dpaa2_io **ret); ++ ++/**********************************/ ++/* General usage of DPIO services */ ++/**********************************/ ++ ++/** ++ * dpaa2_io_service_get_persistent() - Get the DPIO resource from the given ++ * notification context and cpu. ++ * @service: the DPIO service. ++ * @cpu: the cpu that the DPIO resource has stashing affinity to. ++ * @ret: the returned DPIO resource. ++ * ++ * The various DPIO interfaces can accept a "struct dpaa2_io" handle that refers ++ * to an individual DPIO object or to a whole service. In the latter case, an ++ * internal choice is made for each operation. This function supports the former ++ * case, by selecting an individual DPIO object *from* the service in order for ++ * it to be used multiple times to provide "persistence". The returned handle ++ * also carries a reference count, so a corresponding dpaa2_io_down() would be ++ * required when the reference is no longer needed. Note, a parameter of -1 for ++ * 'cpu' will select a DPIO resource that has no particular stashing affinity to ++ * any cpu (eg. one that stashes to platform cache). ++ * ++ * Return 0 for success, or -ENODEV for failure. ++ */ ++int dpaa2_io_service_get_persistent(struct dpaa2_io *service, int cpu, ++ struct dpaa2_io **ret); ++ ++/*****************/ ++/* Pull dequeues */ ++/*****************/ ++ ++/** ++ * dpaa2_io_service_pull_fq() - pull dequeue functions from a fq. ++ * @d: the given DPIO service. ++ * @fqid: the given frame queue id. ++ * @s: the dpaa2_io_store object for the result. ++ * ++ * To support DCA/order-preservation, it will be necessary to support an ++ * alternative form, because they must ultimately dequeue to DQRR rather than a ++ * user-supplied dpaa2_io_store. Furthermore, those dequeue results will ++ * "complete" using a caller-provided callback (from DQRR processing) rather ++ * than the caller explicitly looking at their dpaa2_io_store for results. Eg. ++ * the alternative form will likely take a callback parameter rather than a ++ * store parameter. Ignoring it for now to keep the picture clearer. ++ * ++ * Return 0 for success, or error code for failure. ++ */ ++int dpaa2_io_service_pull_fq(struct dpaa2_io *d, uint32_t fqid, ++ struct dpaa2_io_store *s); ++ ++/** ++ * dpaa2_io_service_pull_channel() - pull dequeue functions from a channel. ++ * @d: the given DPIO service. ++ * @channelid: the given channel id. ++ * @s: the dpaa2_io_store object for the result. ++ * ++ * To support DCA/order-preservation, it will be necessary to support an ++ * alternative form, because they must ultimately dequeue to DQRR rather than a ++ * user-supplied dpaa2_io_store. Furthermore, those dequeue results will ++ * "complete" using a caller-provided callback (from DQRR processing) rather ++ * than the caller explicitly looking at their dpaa2_io_store for results. Eg. ++ * the alternative form will likely take a callback parameter rather than a ++ * store parameter. Ignoring it for now to keep the picture clearer. ++ * ++ * Return 0 for success, or error code for failure. ++ */ ++int dpaa2_io_service_pull_channel(struct dpaa2_io *d, uint32_t channelid, ++ struct dpaa2_io_store *s); ++ ++/************/ ++/* Enqueues */ ++/************/ ++ ++/** ++ * dpaa2_io_service_enqueue_fq() - Enqueue a frame to a frame queue. ++ * @d: the given DPIO service. ++ * @fqid: the given frame queue id. ++ * @fd: the frame descriptor which is enqueued. ++ * ++ * This definition bypasses some features that are not expected to be priority-1 ++ * features, and may not be needed at all via current assumptions (QBMan's ++ * feature set is wider than the MC object model is intendeding to support, ++ * initially at least). Plus, keeping them out (for now) keeps the API view ++ * simpler. Missing features are; ++ * - enqueue confirmation (results DMA'd back to the user) ++ * - ORP ++ * - DCA/order-preservation (see note in "pull dequeues") ++ * - enqueue consumption interrupts ++ * ++ * Return 0 for successful enqueue, or -EBUSY if the enqueue ring is not ready, ++ * or -ENODEV if there is no dpio service. ++ */ ++int dpaa2_io_service_enqueue_fq(struct dpaa2_io *d, ++ uint32_t fqid, ++ const struct dpaa2_fd *fd); ++ ++/** ++ * dpaa2_io_service_enqueue_qd() - Enqueue a frame to a QD. ++ * @d: the given DPIO service. ++ * @qdid: the given queuing destination id. ++ * @prio: the given queuing priority. ++ * @qdbin: the given queuing destination bin. ++ * @fd: the frame descriptor which is enqueued. ++ * ++ * This definition bypasses some features that are not expected to be priority-1 ++ * features, and may not be needed at all via current assumptions (QBMan's ++ * feature set is wider than the MC object model is intendeding to support, ++ * initially at least). Plus, keeping them out (for now) keeps the API view ++ * simpler. Missing features are; ++ * - enqueue confirmation (results DMA'd back to the user) ++ * - ORP ++ * - DCA/order-preservation (see note in "pull dequeues") ++ * - enqueue consumption interrupts ++ * ++ * Return 0 for successful enqueue, or -EBUSY if the enqueue ring is not ready, ++ * or -ENODEV if there is no dpio service. ++ */ ++int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, ++ uint32_t qdid, uint8_t prio, uint16_t qdbin, ++ const struct dpaa2_fd *fd); ++ ++/*******************/ ++/* Buffer handling */ ++/*******************/ ++ ++/** ++ * dpaa2_io_service_release() - Release buffers to a buffer pool. ++ * @d: the given DPIO object. ++ * @bpid: the buffer pool id. ++ * @buffers: the buffers to be released. ++ * @num_buffers: the number of the buffers to be released. ++ * ++ * Return 0 for success, and negative error code for failure. ++ */ ++int dpaa2_io_service_release(struct dpaa2_io *d, ++ uint32_t bpid, ++ const uint64_t *buffers, ++ unsigned int num_buffers); ++ ++/** ++ * dpaa2_io_service_acquire() - Acquire buffers from a buffer pool. ++ * @d: the given DPIO object. ++ * @bpid: the buffer pool id. ++ * @buffers: the buffer addresses for acquired buffers. ++ * @num_buffers: the expected number of the buffers to acquire. ++ * ++ * Return a negative error code if the command failed, otherwise it returns ++ * the number of buffers acquired, which may be less than the number requested. ++ * Eg. if the buffer pool is empty, this will return zero. ++ */ ++int dpaa2_io_service_acquire(struct dpaa2_io *d, ++ uint32_t bpid, ++ uint64_t *buffers, ++ unsigned int num_buffers); ++ ++/***************/ ++/* DPIO stores */ ++/***************/ ++ ++/* These are reusable memory blocks for retrieving dequeue results into, and to ++ * assist with parsing those results once they show up. They also hide the ++ * details of how to use "tokens" to make detection of DMA results possible (ie. ++ * comparing memory before the DMA and after it) while minimising the needless ++ * clearing/rewriting of those memory locations between uses. ++ */ ++ ++/** ++ * dpaa2_io_store_create() - Create the dma memory storage for dequeue ++ * result. ++ * @max_frames: the maximum number of dequeued result for frames, must be <= 16. ++ * @dev: the device to allow mapping/unmapping the DMAable region. ++ * ++ * Constructor - max_frames must be <= 16. The user provides the ++ * device struct to allow mapping/unmapping of the DMAable region. Area for ++ * storage will be allocated during create. The size of this storage is ++ * "max_frames*sizeof(struct dpaa2_dq)". The 'dpaa2_io_store' returned is a ++ * wrapper structure allocated within the DPIO code, which owns and manages ++ * allocated store. ++ * ++ * Return dpaa2_io_store struct for successfuly created storage memory, or NULL ++ * if not getting the stroage for dequeue result in create API. ++ */ ++struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames, ++ struct device *dev); ++ ++/** ++ * dpaa2_io_store_destroy() - Destroy the dma memory storage for dequeue ++ * result. ++ * @s: the storage memory to be destroyed. ++ * ++ * Frees to specified storage memory. ++ */ ++void dpaa2_io_store_destroy(struct dpaa2_io_store *s); ++ ++/** ++ * dpaa2_io_store_next() - Determine when the next dequeue result is available. ++ * @s: the dpaa2_io_store object. ++ * @is_last: indicate whether this is the last frame in the pull command. ++ * ++ * Once dpaa2_io_store has been passed to a function that performs dequeues to ++ * it, like dpaa2_ni_rx(), this function can be used to determine when the next ++ * frame result is available. Once this function returns non-NULL, a subsequent ++ * call to it will try to find the *next* dequeue result. ++ * ++ * Note that if a pull-dequeue has a null result because the target FQ/channel ++ * was empty, then this function will return NULL rather than expect the caller ++ * to always check for this on his own side. As such, "is_last" can be used to ++ * differentiate between "end-of-empty-dequeue" and "still-waiting". ++ * ++ * Return dequeue result for a valid dequeue result, or NULL for empty dequeue. ++ */ ++struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last); ++ ++#ifdef CONFIG_FSL_QBMAN_DEBUG ++/** ++ * dpaa2_io_query_fq_count() - Get the frame and byte count for a given fq. ++ * @d: the given DPIO object. ++ * @fqid: the id of frame queue to be queried. ++ * @fcnt: the queried frame count. ++ * @bcnt: the queried byte count. ++ * ++ * Knowing the FQ count at run-time can be useful in debugging situations. ++ * The instantaneous frame- and byte-count are hereby returned. ++ * ++ * Return 0 for a successful query, and negative error code if query fails. ++ */ ++int dpaa2_io_query_fq_count(struct dpaa2_io *d, uint32_t fqid, ++ uint32_t *fcnt, uint32_t *bcnt); ++ ++/** ++ * dpaa2_io_query_bp_count() - Query the number of buffers currenty in a ++ * buffer pool. ++ * @d: the given DPIO object. ++ * @bpid: the index of buffer pool to be queried. ++ * @num: the queried number of buffers in the buffer pool. ++ * ++ * Return 0 for a sucessful query, and negative error code if query fails. ++ */ ++int dpaa2_io_query_bp_count(struct dpaa2_io *d, uint32_t bpid, ++ uint32_t *num); ++#endif ++#endif /* __FSL_DPAA2_IO_H */ diff --git a/target/linux/layerscape/patches-4.4/7199-dpaa2-dpio-Cosmetic-cleanup.patch b/target/linux/layerscape/patches-4.4/7199-dpaa2-dpio-Cosmetic-cleanup.patch new file mode 100644 index 0000000000..dd5eb7e1b0 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7199-dpaa2-dpio-Cosmetic-cleanup.patch @@ -0,0 +1,35 @@ +From a4150e8ec8da3add3933dd026c7154dcca2ee2e7 Mon Sep 17 00:00:00 2001 +From: Mihai Caraman +Date: Tue, 5 Apr 2016 14:47:57 +0000 +Subject: [PATCH 199/226] dpaa2-dpio: Cosmetic cleanup + +Replace obsolete terms. + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/dpio/fsl_qbman_base.h | 2 +- + drivers/staging/fsl-mc/bus/dpio/qbman_portal.h | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dpio/fsl_qbman_base.h ++++ b/drivers/staging/fsl-mc/bus/dpio/fsl_qbman_base.h +@@ -51,7 +51,7 @@ struct qbman_block_desc { + * Descriptor for a QBMan software portal, expressed in terms that make sense to + * the user context. Ie. on MC, this information is likely to be true-physical, + * and instantiated statically at compile-time. On GPP, this information is +- * likely to be obtained via "discovery" over a partition's "layerscape bus" ++ * likely to be obtained via "discovery" over a partition's "MC bus" + * (ie. in response to a MC portal command), and would take into account any + * virtualisation of the GPP user's address space and/or interrupt numbering. + */ +--- a/drivers/staging/fsl-mc/bus/dpio/qbman_portal.h ++++ b/drivers/staging/fsl-mc/bus/dpio/qbman_portal.h +@@ -138,7 +138,7 @@ static inline void *qbman_swp_mc_complet + /* This struct locates a sub-field within a QBMan portal (CENA) cacheline which + * is either serving as a configuration command or a query result. The + * representation is inherently little-endian, as the indexing of the words is +- * itself little-endian in nature and layerscape is little endian for anything ++ * itself little-endian in nature and DPAA2 is little endian for anything + * that crosses a word boundary too (64-bit fields are the obvious examples). + */ + struct qb_attr_code { diff --git a/target/linux/layerscape/patches-4.4/7200-staging-fsl-mc-dpio-driver-match-id-cleanup.patch b/target/linux/layerscape/patches-4.4/7200-staging-fsl-mc-dpio-driver-match-id-cleanup.patch new file mode 100644 index 0000000000..91ff06a381 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7200-staging-fsl-mc-dpio-driver-match-id-cleanup.patch @@ -0,0 +1,26 @@ +From 3cc23880ecb98efe2d868254201ac58f945d9e1d Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 15 Jun 2016 14:05:08 -0500 +Subject: [PATCH 200/226] staging: fsl-mc: dpio driver match id cleanup + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-mc/bus/dpio/dpio-drv.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/staging/fsl-mc/bus/dpio/dpio-drv.c ++++ b/drivers/staging/fsl-mc/bus/dpio/dpio-drv.c +@@ -364,12 +364,10 @@ err_mcportal: + return err; + } + +-static const struct fsl_mc_device_match_id dpaa2_dpio_match_id_table[] = { ++static const struct fsl_mc_device_id dpaa2_dpio_match_id_table[] = { + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dpio", +- .ver_major = DPIO_VER_MAJOR, +- .ver_minor = DPIO_VER_MINOR + }, + { .vendor = 0x0 } + }; diff --git a/target/linux/layerscape/patches-4.4/7201-staging-dpaa2-eth-initial-commit-of-dpaa2-eth-driver.patch b/target/linux/layerscape/patches-4.4/7201-staging-dpaa2-eth-initial-commit-of-dpaa2-eth-driver.patch new file mode 100644 index 0000000000..cbec144516 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7201-staging-dpaa2-eth-initial-commit-of-dpaa2-eth-driver.patch @@ -0,0 +1,12268 @@ +From e588172442093fe22374dc1bfc88a7da751d6b30 Mon Sep 17 00:00:00 2001 +From: Bogdan Hamciuc +Date: Tue, 15 Sep 2015 10:14:16 -0500 +Subject: [PATCH 201/226] staging: dpaa2-eth: initial commit of dpaa2-eth + driver + +commit 3106ece5d96784b63a4eabb26661baaefedd164f +[context adjustment] + +This is a commit of a squash of the cumulative dpaa2-eth patches +in the sdk 2.0 kernel as of 3/7/2016. + +flib,dpaa2-eth: flib header update (Rebasing onto kernel 3.19, MC 0.6) + +this patch was moved from 4.0 branch + +Signed-off-by: Bogdan Hamciuc +[Stuart: split into multiple patches] +Signed-off-by: Stuart Yoder +Integrated-by: Jilong Guo + +flib,dpaa2-eth: updated Eth (was: Rebasing onto kernel 3.19, MC 0.6) + +updated Ethernet driver from 4.0 branch + +Signed-off-by: Bogdan Hamciuc +[Stuart: cherry-picked patch from 4.0 and split it up] +Signed-off-by: Stuart Yoder + +Conflicts: + + drivers/staging/Makefile + +Signed-off-by: Stuart Yoder + +dpaa2-eth: Adjust 'options' size + +The 'options' field of various MC configuration structures has changed +from u64 to u32 as of MC firmware version 7.0. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I9ba0c19fc22f745e6be6cc40862afa18fa3ac3db +Reviewed-on: http://git.am.freescale.net:8181/35579 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Selectively disable preemption + +Temporary workaround for a MC Bus API quirk which only allows us to +specify exclusively, either a spinlock-protected MC Portal, or a +mutex-protected one, but then tries to match the runtime context in +order to enforce their usage. + +Te Be Reverted. + +Signed-off-by: Bogdan Hamciuc +Change-Id: Ida2ec1fdbdebfd2e427f96ddad7582880146fda9 +Reviewed-on: http://git.am.freescale.net:8181/35580 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Fix ethtool bug + +We were writing beyond the end of the allocated data area for ethtool +statistics. + +Signed-off-by: Ioana Radulescu +Change-Id: I6b77498a78dad06970508ebbed7144be73854f7f +Reviewed-on: http://git.am.freescale.net:8181/35583 +Reviewed-by: Bogdan Hamciuc +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Retry read if store unexpectedly empty + +After we place a volatile dequeue command, we might get to inquire the +store before the DMA has actually completed. In such cases, we must +retry, lest we'll have the store overwritten by the next legitimate +volatile dequeue. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I314fbb8b4d9f589715e42d35fc6677d726b8f5ba +Reviewed-on: http://git.am.freescale.net:8181/35584 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +flib: Fix "missing braces around initializer" warning + +Gcc does not support (yet?) the ={0} initializer in the case of an array +of structs. Fixing the Flib in order to make the warning go away. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I8782ecb714c032cfeeecf4c8323cf9dbb702b10f +Reviewed-on: http://git.am.freescale.net:8181/35586 +Reviewed-by: Stuart Yoder +Tested-by: Stuart Yoder + +Revert "dpaa2-eth: Selectively disable preemption" + +This reverts commit e1455823c33b8dd48b5d2d50a7e8a11d3934cc0d. + +dpaa2-eth: Fix memory leak + +A buffer kmalloc'ed at probe time was not freed after it was no +longer needed. + +Signed-off-by: Ioana Radulescu +Change-Id: Iba197209e9203ed306449729c6dcd23ec95f094d +Reviewed-on: http://git.am.freescale.net:8181/35756 +Reviewed-by: Bogdan Hamciuc +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Remove unused field in ldpaa_eth_priv structure + +Signed-off-by: Ioana Radulescu +Change-Id: I124c3e4589b6420b1ea5cc05a03a51ea938b2bea +Reviewed-on: http://git.am.freescale.net:8181/35757 +Reviewed-by: Bogdan Hamciuc +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Fix "NOHZ: local_softirq_pending" warning + +Explicitly run softirqs after we enable NAPI. This in particular gets us +rid of the "NOHZ: local_softirq_pending" warnings, but it also solves a +couple of other problems, among which fluctuating performance and high +ping latencies. + +Notes: + - This will prevent us from timely processing notifications and +other "non-frame events" coming into the software portal. So far, +though, we only expect Dequeue Available Notifications, so this patch +is good enough for now. + - A degradation in console responsiveness is expected, especially in +cases where the bottom-half runs on the same CPU as the console. + +Signed-off-by: Bogdan Hamciuc +Signed-off-by: Ioana Radulescu +Change-Id: Ia6f11da433024e80ee59e821c9eabfa5068df5e5 +Reviewed-on: http://git.am.freescale.net:8181/35830 +Reviewed-by: Alexandru Marginean +Reviewed-by: Stuart Yoder +Tested-by: Stuart Yoder + +dpaa2-eth: Add polling mode for link state changes + +Add the Kconfigurable option of using a thread for polling on +the link state instead of relying on interrupts from the MC. + +Signed-off-by: Ioana Radulescu +Change-Id: If2fe66fc5c0fbee2568d7afa15d43ea33f92e8e2 +Reviewed-on: http://git.am.freescale.net:8181/35967 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Bogdan Hamciuc +Reviewed-by: Stuart Yoder + +dpaa2-eth: Update copyright years. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I7e00eecfc5569027c908124726edaf06be357c02 +Reviewed-on: http://git.am.freescale.net:8181/37666 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Ruxandra Ioana Radulescu +Reviewed-by: Stuart Yoder + +dpaa2-eth: Drain bpools when netdev is down + +In a data path layout with potentially a dozen interfaces, not all of +them may be up at the same time, yet they may consume a fair amount of +buffer space. +Drain the buffer pool upon ifdown and re-seed it at ifup. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I24a379b643c8b5161a33b966c3314cf91024ed4a +Reviewed-on: http://git.am.freescale.net:8181/37667 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Ruxandra Ioana Radulescu +Reviewed-by: Stuart Yoder + +dpaa2-eth: Interrupts cleanup + +Add the code for cleaning up interrupts on driver removal. +This was lost during transition from kernel 3.16 to 3.19. + +Also, there's no need to call devm_free_irq() if probe fails +as the kernel will release all driver resources. + +Signed-off-by: Ioana Radulescu +Change-Id: Ifd404bbf399d5ba62e2896371076719c1d6b4214 +Reviewed-on: http://git.am.freescale.net:8181/36199 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Bogdan Hamciuc +Reviewed-by: Bharat Bhushan +Reviewed-by: Stuart Yoder +Reviewed-on: http://git.am.freescale.net:8181/37690 + +dpaa2-eth: Ethtool support for hashing + +Only one set of header fields is supported for all protocols, the driver +silently replaces previous configuration regardless of user selected +protocol. +Following fields are supported: + L2DA + VLAN tag + L3 proto + IP SA + IP DA + L4 bytes 0 & 1 [TCP/UDP src port] + L4 bytes 2 & 3 [TCP/UDP dst port] + +Signed-off-by: Alex Marginean + +Change-Id: I97c9dac1b842fe6bc7115e40c08c42f67dee8c9c +Reviewed-on: http://git.am.freescale.net:8181/37260 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Bogdan Hamciuc +Reviewed-by: Stuart Yoder + +dpaa2-eth: Fix maximum number of FQs + +The maximum number of Rx/Tx conf FQs associated to a DPNI was not +updated when the implementation changed. It just happened to work +by accident. + +Signed-off-by: Ioana Radulescu +Reviewed-by: Bogdan Hamciuc +Change-Id: I03e30e0121a40d0d15fcdc4bee1fb98caa17c0ef +Reviewed-on: http://git.am.freescale.net:8181/37668 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Fix Rx buffer address alignment + +We need to align the start address of the Rx buffers to +LDPAA_ETH_BUF_ALIGN bytes. We were using SMP_CACHE_BYTES instead. +It happened to work because both defines have the value of 64, +but this may change at some point. + +Signed-off-by: Ioana Radulescu +Reviewed-by: Bogdan Hamciuc +Change-Id: I08a0f3f18f82c5581c491bd395e3ad066b25bcf5 +Reviewed-on: http://git.am.freescale.net:8181/37669 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Add buffer count to ethtool statistics + +Print the number of buffers available in the pool for a certain DPNI +along with the rest of the ethtool -S stats. + +Signed-off-by: Ioana Radulescu +Reviewed-by: Bogdan Hamciuc +Change-Id: Ia1f5cf341c8414ae2058a73f6bc81490ef134592 +Reviewed-on: http://git.am.freescale.net:8181/37671 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Add Rx error queue + +Add a Kconfigurable option that allows Rx error frames to be +enqueued on an error FQ. By default error frames are discarded, +but for debug purposes we may want to process them at driver +level. + +Note: Checkpatch issues a false positive about complex macros that +should be parenthesized. + +Signed-off-by: Ioana Radulescu +Reviewed-by: Bogdan Hamciuc +Change-Id: I7d19d00b5d5445514ebd112c886ce8ccdbb1f0da +Reviewed-on: http://git.am.freescale.net:8181/37672 +Reviewed-by: Stuart Yoder +Tested-by: Stuart Yoder + +staging: fsl-dpaa2: FLib headers cleanup + +Going with the flow of moving fsl-dpaa2 headers into the drivers' +location rather than keeping them all in one place. + +Signed-off-by: Bogdan Hamciuc +Change-Id: Ia2870cd019a4934c7835d38752a46b2a0045f30e +Reviewed-on: http://git.am.freescale.net:8181/37674 +Reviewed-by: Ruxandra Ioana Radulescu +Reviewed-by: Stuart Yoder +Tested-by: Stuart Yoder + +dpaa2-eth: Klocwork fixes + +Fix several issues reported by Klocwork. + +Signed-off-by: Ioana Radulescu +Reviewed-by: Bogdan Hamciuc +Change-Id: I1e23365765f3b0ff9b6474d8207df7c1f2433ccd +Reviewed-on: http://git.am.freescale.net:8181/37675 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Probe devices with no hash support + +Don't fail at probe if the DPNI doesn't have the hash distribution +option enabled. Instead, initialize a single Rx frame queue and +use it for all incoming traffic. + +Rx flow hashing configuration through ethtool will not work +in this case. + +Signed-off-by: Ioana Radulescu +Reviewed-by: Bogdan Hamciuc +Change-Id: Iaf17e05b15946e6901c39a21b5344b89e9f1d797 +Reviewed-on: http://git.am.freescale.net:8181/37676 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Process frames in IRQ context + +Stop using threaded IRQs and move back to hardirq top-halves. +This is the first patch of a small series adapting the DPIO and Ethernet +code to these changes. + +Signed-off-by: Roy Pledge +Tested-by: Ioana Radulescu +Tested-by: Bogdan Hamciuc +Reviewed-by: Bogdan Hamciuc +Reviewed-by: Stuart Yoder +[Stuart: split dpio and eth into separate patches, updated subject] +Signed-off-by: Stuart Yoder + +dpaa2-eth: Fix bug in NAPI poll + +We incorrectly rearmed FQDAN notifications at the end of a NAPI cycle, +regardless of whether the NAPI budget was consumed or not. We only need +to rearm notifications if the NAPI cycle cleaned less frames than its +budget, otherwise a new NAPI poll will be scheduled anyway. + +Signed-off-by: Ioana Radulescu +Reviewed-by: Bogdan Hamciuc +Change-Id: Ib55497bdbd769047420b3150668f2e2aef3c93f6 +Reviewed-on: http://git.am.freescale.net:8181/38317 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Use dma_map_sg on Tx + +Use the simpler dma_map_sg() along with the scatterlist API if the +egress frame is scatter-gather, at the cost of keeping some extra +information in the frame's software annotation area. + +Signed-off-by: Bogdan Hamciuc +Change-Id: If293aeabbd58d031f21456704357d4ff7e53c559 +Reviewed-on: http://git.am.freescale.net:8181/37681 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Reduce retries if Tx portal busy + +Too many retries due to Tx portal contention led to a significant cycle +waste and reduction in performance. +Reducing the number of enqueue retries and dropping frame if eventually +unsuccessful. + +Signed-off-by: Bogdan Hamciuc +Change-Id: Ib111ec61cd4294a7632348c25fa3d7f4002be0c0 +Reviewed-on: http://git.am.freescale.net:8181/37682 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Add sysfs support for TxConf affinity change + +This adds support in sysfs for affining Tx Confirmation queues to GPPs, +via the affine DPIO objects. + +The user can specify a cpu list in /sys/class/net/ni/txconf_affinity +to which the Ethernet driver will affine the TxConf FQs, in round-robin +fashion. This is naturally a bit coarse, because there is no "official" +mapping of the transmitting CPUs to Tx Confirmation queues. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I4b3da632e202ceeb22986c842d746aafe2a87a81 +Reviewed-on: http://git.am.freescale.net:8181/37684 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Implement ndo_select_queue + +Use a very simple selection function for the egress FQ. The purpose +behind this is to more evenly distribute Tx Confirmation traffic, +especially in the case of multiple egress flows, when bundling it all on +CPU 0 would make that CPU a bottleneck. + +Signed-off-by: Bogdan Hamciuc +Change-Id: Ibfe8aad7ad5c719cc95d7817d7de6d2094f0f7ed +Reviewed-on: http://git.am.freescale.net:8181/37685 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Reduce TxConf NAPI weight back to 64 + +It turns out that not only the kernel frowned upon the old budget of 256, +but the measured values were well below that anyway. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I62ddd3ea1dbfd8b51e2bcb2286e0d5eb10ac7f27 +Reviewed-on: http://git.am.freescale.net:8181/37688 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Try refilling the buffer pool less often + +We used to check if the buffer pool needs refilling at each Rx +frame. Instead, do that check (and the actual buffer release if +needed) only after a pull dequeue. + +Signed-off-by: Ioana Radulescu +Change-Id: Id52fab83873c40a711b8cadfcf909eb7e2e210f3 +Reviewed-on: http://git.am.freescale.net:8181/38318 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Bogdan Hamciuc +Reviewed-by: Stuart Yoder + +dpaa2-eth: Stay in NAPI if exact budget is met + +An off-by-one bug would cause premature exiting from the NAPI cycle. +Performance degradation is particularly severe in IPFWD cases. + +Signed-off-by: Ioana Radulescu +Tested-by: Bogdan Hamciuc +Change-Id: I9de2580c7ff8e46cbca9613890b03737add35e26 +Reviewed-on: http://git.am.freescale.net:8181/37908 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Bogdan Hamciuc +Reviewed-by: Stuart Yoder + +dpaa2-eth: Minor changes to FQ stats + +Signed-off-by: Ioana Radulescu +Change-Id: I0ced0e7b2eee28599cdea79094336c0d44f0d32b +Reviewed-on: http://git.am.freescale.net:8181/38319 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Bogdan Hamciuc +Reviewed-by: Stuart Yoder + +dpaa2-eth: Support fewer DPIOs than CPUs + +The previous DPIO functions would transparently choose a (perhaps +non-affine) CPU if the required CPU was not available. Now that their API +contract is enforced, we must make an explicit request for *any* DPIO if +the request for an *affine* DPIO has failed. + +Signed-off-by: Bogdan Hamciuc +Change-Id: Ib08047ffa33518993b1ffa4671d0d4f36d6793d0 +Reviewed-on: http://git.am.freescale.net:8181/38320 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Roy Pledge +Reviewed-by: Stuart Yoder + +dpaa2-eth: cosmetic changes in hashing code + +Signed-off-by: Alex Marginean +Change-Id: I79e21a69a6fb68cdbdb8d853c059661f8988dbf9 +Reviewed-on: http://git.am.freescale.net:8181/37258 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Prefetch data before initial access + +Signed-off-by: Ioana Radulescu +Change-Id: Ie8f0163651aea7e3e197a408f89ca98d296d4b8b +Reviewed-on: http://git.am.freescale.net:8181/38753 +Reviewed-by: Bogdan Hamciuc +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Use netif_receive_skb + +netif_rx() is a leftover since our pre-NAPI codebase. + +Signed-off-by: Ioana Radulescu +Change-Id: I02ff0a059862964df1bf81b247853193994c2dfe +Reviewed-on: http://git.am.freescale.net:8181/38754 +Reviewed-by: Bogdan Hamciuc +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Use napi_alloc_frag() on Rx. + +A bit better-suited than netdev_alloc_frag(). + +Signed-off-by: Ioana Radulescu +Change-Id: I8863a783502db963e5dc968f049534c36ad484e2 +Reviewed-on: http://git.am.freescale.net:8181/38755 +Reviewed-by: Bogdan Hamciuc +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Silence skb_realloc_headroom() warning + +pktgen tests tend to be too noisy because pktgen does not observe the +net device's needed_headroom specification and we used to be pretty loud +about that. We'll print the warning message just once. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I3c12eba29c79aa9c487307d367f6d9f4dbe447a3 +Reviewed-on: http://git.am.freescale.net:8181/38756 +Reviewed-by: Ruxandra Ioana Radulescu +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Print message upon device unplugging + +Give a console notification when a DPNI is unplugged. This is useful for +automated tests to know the operation (which is not instantaneous) has +finished. + +Signed-off-by: Bogdan Hamciuc +Change-Id: If33033201fcee7671ad91c2b56badf3fb56a9e3e +Reviewed-on: http://git.am.freescale.net:8181/38757 +Reviewed-by: Ruxandra Ioana Radulescu +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Add debugfs support + +Add debugfs entries for showing detailed per-CPU and per-FQ +counters for each network interface. Also add a knob for +resetting these stats. +The agregated interface statistics were already available through +ethtool -S. + +Signed-off-by: Ioana Radulescu +Reviewed-by: Bogdan Hamciuc +Change-Id: I55f5bfe07a15b0d1bf0c6175d8829654163a4318 +Reviewed-on: http://git.am.freescale.net:8181/38758 +Reviewed-by: Stuart Yoder +Tested-by: Stuart Yoder + +dpaa2-eth: limited support for flow steering + +Steering is supported on a sub-set of fields, including DMAC, IP SRC +and DST, L4 ports. +Steering and hashing configurations depend on each other, that makes +the whole thing tricky to configure. Currently FS can be configured +using only the fields selected for hashing and all the hashing fields +must be included in the match key - masking doesn't work yet. + +Signed-off-by: Alex Marginean +Change-Id: I9fa3199f7818a9a5f9d69d3483ffd839056cc468 +Reviewed-on: http://git.am.freescale.net:8181/38759 +Reviewed-by: Bogdan Hamciuc +Tested-by: Review Code-CDREVIEW +Reviewed-by: Ruxandra Ioana Radulescu +Reviewed-by: Stuart Yoder + +dpaa2-eth: Rename files into the dpaa2 nomenclature + +Signed-off-by: Bogdan Hamciuc +Change-Id: I1c3d62e2f19a59d4b65727234fd7df2dfd8683d9 +Reviewed-on: http://git.am.freescale.net:8181/38965 +Reviewed-by: Alexandru Marginean +Reviewed-by: Ruxandra Ioana Radulescu +Reviewed-by: Stuart Yoder +Tested-by: Stuart Yoder + +staging: dpaa2-eth: migrated remaining flibs for MC fw 8.0.0 + +Signed-off-by: J. German Rivera +[Stuart: split eth part into separate patch, updated subject] +Signed-off-by: Stuart Yoder + +dpaa2-eth: Clear 'backup_pool' attribute + +New MC-0.7 firmware allows specifying an alternate buffer pool, but we +are momentarily not using that feature. + +Signed-off-by: Bogdan Hamciuc +Change-Id: I0a6e6626512b7bbddfef732c71f1400b67f3e619 +Reviewed-on: http://git.am.freescale.net:8181/39149 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +dpaa2-eth: Do programing of MSIs in devm_request_threaded_irq() + +With the new dprc_set_obj_irq() we can now program MSIS in the device +in the callback invoked from devm_request_threaded_irq(). +Since this callback is invoked with interrupts disabled, we need to +use an atomic portal, instead of the root DPRC's built-in portal +which is non-atomic. + +Signed-off-by: Itai Katz +Signed-off-by: J. German Rivera +[Stuart: split original patch into multiple patches] +Signed-off-by: Stuart Yoder + +dpaa2-eth: Do not map beyond skb tail + +On Tx do dma_map only until skb->tail, rather than skb->end. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Declare NETIF_F_LLTX as a capability + +We are effectively doing lock-less Tx. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Avoid bitcopy of 'backpointers' struct + +Make 'struct ldpaa_eth_swa bps' a pointer and void copying it on both Tx +and TxConf. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Use CDANs instead of FQDANs + +Use Channel Dequeue Available Notifications (CDANs) instead of +Frame Queue notifications. We allocate a QMan channel (or DPCON +object) for each available cpu and assign to it the Rx and Tx conf +queues associated with that cpu. + +We usually want to have affine DPIOs and DPCONs (one for each core). +If this is not possible due to insufficient resources, we distribute +all ingress traffic on the cores with affine DPIOs. + +NAPI instances are now one per channel instead of one per FQ, as the +interrupt source changes. Statistics counters change accordingly. + +Note that after this commit is applied, one needs to provide sufficient +DPCON objects (either through DPL on restool) in order for the Ethernet +interfaces to work. + +Signed-off-by: Ioana Radulescu +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Cleanup debugfs statistics + +Several minor changes to statistics reporting: +* Fix print alignment of statistics counters +* Fix a naming ambiguity in the cpu_stats debugfs ops +* Add Rx/Tx error counters; these were already used, but not +reported in the per-CPU stats + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Add tx shaping configuration in sysfs + +Egress traffic can be shaped via a per-DPNI SysFS entry: + echo M N > /sys/class/net/ni/tx_shaping +where: + M is the maximum throughput, expressed in Mbps. + N is the maximum burst size, expressed in bytes, at most 64000. + +To remove shaping, use M=0, N=0. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Fix "Tx busy" counter + +Under heavy egress load, when a large number of the transmitted packets +cannot be sent because of high portal contention, the "Tx busy" counter +was not properly incremented. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Fix memory cleanup in case of Tx congestion + +The error path of ldpaa_eth_tx() was not properly freeing the SGT buffer +if the enqueue had failed because of congestion. DMA unmapping was +missing, too. + +Factor the code originally inside the TxConf callback out into a +separate function that would be called on both TxConf and Tx paths. + +Signed-off-by: Bogdan Hamciuc +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Use napi_gro_receive() + +Call napi_gro_receive(), effectively enabling GRO. +NOTE: We could further optimize this by looking ahead in the parse results +received from hardware and only using GRO when the L3+L4 combination is +appropriate. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Fix compilation of Rx Error FQ code + +Conditionally-compiled code slipped between cracks when FLibs were +updated. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: Add Kconfig dependency on DEBUG_FS + +The driver's debugfs support depends on the generic CONFIG_DEBUG_FS. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Fix interface down/up bug + +If a networking interface was brought down while still receiving +ingress traffic, the delay between DPNI disable and NAPI disable +was not enough to ensure all in-flight frames got processed. +Instead, some frames were left pending in the Rx queues. If the +net device was then removed (i.e. restool unbind/unplug), the +call to dpni_reset() silently failed and the kernel crashed on +device replugging. + +Fix this by increasing the FQ drain time. Also, at ifconfig up +we enable NAPI before starting the DPNI, to make sure we don't +miss any early CDANs. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Iterate only through initialized channels + +The number of DPIO objects available to a DPNI may be fewer than the +number of online cores. A typical example would be a DPNI with a +distribution size smaller than 8. Since we only initialize as many +channels (DPCONs) as there are DPIOs, iterating through all online cpus +would produce a nasty oops when retrieving ethtool stats. + +Signed-off-by: Bogdan Hamciuc + +net: pktgen: Observe needed_headroom of the device + +Allocate enough space so as not to force the outgoing net device to do +skb_realloc_headroom(). + +Signed-off-by: Bogdan Hamciuc +Signed-off-by: David S. Miller + +dpaa2-eth: Trace buffer pool seeding + +Add ftrace support for buffer pool seeding. Individual buffers are +described by virtual and dma addresses and sizes, as well as by bpid. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Explicitly set carrier off at ifconfig up + +If we don't, netif_carrier_ok() will still return true even if the link +state is marked as LINKWATCH_PENDING, which in a dpni-2-dpni case may +last indefinitely long. This will cause "ifconfig up" followed by "ip +link show" to report LOWER_UP when the peer DPNI is still down (and in +fact before we've even received any link notification at all). + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Fix FQ type in stats print + +Fix a bug where the type of the Rx error queue was printed +incorrectly in the debugfs statistics + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Don't build debugfs support as a separate module + +Instead have module init and exit functions declared explicitly for +the Ethernet driver and initialize/destroy the debugfs directory there. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Remove debugfs #ifdefs from dpaa2-eth.c + +Instead of conditionally compiling the calls to debugfs init +functions in dpaa2-eth.c, define no-op stubs for these functions +in case the debugfs Kconfig option is not enabled. This makes +the code more readable. + +Signed-off-by: Ioana Radulescu +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Use napi_complete_done() + +Replace napi_complete() with napi_complete_done(). + +Together with setting /sys/class/net/ethX/gro_flush_timeout, this +allows us to take better advantage of GRO coalescing and improves +throughput and cpu load in TCP termination tests. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Fix error path in probe + +NAPI delete was called at the wrong place when exiting probe +function on an error path + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Allocate channels based on queue count + +Limit the number of channels allocated per DPNI to the maximum +between the number of Rx queues per traffic class (distribution size) +and Tx confirmation queues (number of tx flows). +If this happens to be larger than the number of available cores, only +allocate one channel for each core and distribute the frame queues on +the cores/channels in a round robin fashion. + +Signed-off-by: Ioana Radulescu +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Use DPNI setting for number of Tx flows + +Instead of creating one Tx flow for each online cpu, use the DPNI +attributes for deciding how many senders we have. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Renounce sentinel in enum dpni_counter + +Bring back the Flib header dpni.h to its initial content by removing the +sentinel value in enum dpni_counter. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Fix Rx queue count + +We were missing a roundup to the next power of 2 in order to be in sync +with the MC implementation. +Actually, moved that logic in a separate function which we'll remove +once the MC API is updated. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Unmap the S/G table outside ldpaa_eth_free_rx_fd + +The Scatter-Gather table is already unmapped outside ldpaa_eth_free_rx_fd +so no need to try to unmap it once more. + +Signed-off-by: Cristian Sovaiala + +dpaa2-eth: Use napi_schedule_irqoff() + +At the time we schedule NAPI, the Dequeue Available Notifications (which +are the de facto triggers of NAPI processing) are already disabled. + +Signed-off-by: Ioana Radulescu +Signed-off-by: Bogdan Hamciuc + +net: Fix ethernet Kconfig + +Re-add missing 'source' directive. This exists on the integration +branch, but was mistakenly removed by an earlier dpaa2-eth rebase. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Manually update link state at ifup + +The DPMAC may have handled the link state notification before the DPNI +is up. A new PHY state transision may not subsequently occur, so the +DPNI must initiate a read of the DPMAC state. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Stop carrier upon ifdown + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Fix print messages in link state handling code + +Avoid an "(uninitialized)" message during DPNI probe by replacing +netdev_info() with its corresponding dev_info(). +Purge some related comments and add some netdev messages to assist +link state debugging. +Remove an excessively defensive assertion. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Do not allow ethtool settings change while the NI is up + +Due to a MC limitation, link state changes while the DPNI is enabled +will fail. For now, we'll just prevent the call from going down to the MC +if we know it will fail. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Reduce ethtool messages verbosity + +Transform a couple of netdev_info() calls into netdev_dbg(). + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Only unmask IRQs that we actually handle + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Produce fewer boot log messages + +No longer print one line for each all-zero hwaddr that was replaced with +a random MAC address; just inform the user once that this has occurred. +And reduce redundancy of some printouts in the bootlog. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Fix big endian issue + +We were not doing any endianness conversions on the scatter gather +table entries, which caused problems on big endian kernels. + +For frame descriptors the QMan driver takes care of this transparently, +but in the case of SG entries we need to do it ourselves. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Force atomic context for lazy bpool seeding + +We use the same ldpaa_bp_add_7() function for initial buffer pool +seeding (from .ndo_open) and for hotpath pool replenishing. The function +is using napi_alloc_frag() as an optimization for the Rx datapath, but +that turns out to require atomic execution because of a this_cpu_ptr() +call down its stack. +This patch temporarily disables preemption around the initial seeding of +the Rx buffer pool. + +Signed-off-by: Bogdan Hamciuc + +dpaa-eth: Integrate Flib version 0.7.1.2 + +Although API-compatible with 0.7.1.1, there are some ABI changes +that warrant a new integration. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: No longer adjust max_dist_per_tc + +The MC firmware until version 0.7.1.1/8.0.2 requires that +max_dist_per_tc have the value expected by the hardware, which would be +different from what the user expects. MC firmware 0.7.1.2/8.0.5 fixes +that, so we remove our transparent conversion. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Enforce 256-byte Rx alignment + +Hardware erratum enforced by MC requires that Rx buffer lengths and +addresses be 265-byte aligned. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Rename Tx buf alignment macro + +The existing "BUF_ALIGN" macro remained confined to Tx usage, after +separate alignment was introduced for Rx. Renaming accordingly. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Fix hashing distribution size + +Commit be3fb62623e4338e60fb60019f134b6055cbc127 +Author: Bogdan Hamciuc +Date: Fri Oct 23 18:26:44 2015 +0300 + + dpaa2-eth: No longer adjust max_dist_per_tc + +missed one usage of the ldpaa_queue_count() function, making +distribution size inadvertenly lower. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Remove ndo_select_queue + +Our implementation of ndo_select_queue would lead to questions regarding +our support for qdiscs. Until we find an optimal way to select the txq +without breaking future qdisc integration, just remove the +ndo_select_queue callback entirely and leave the stack figure out the +flow. +This incurs a ~2-3% penalty on some performance tests. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Select TxConf FQ based on processor id + +Use smp_processor_id instead of skb queue mapping to determine the tx +flow id and implicitly the confirmation queue. + +Signed-off-by: Bogdan Hamciuc + +dpaa2-eth: Reduce number of buffers in bpool + +Reduce the maximum number of buffers in each buffer pool associated +with a DPNI. This in turn reduces the number of memory allocations +performed in a single batch when buffers fall below a certain +threshold. + +Provides a significant performance boost (~5-10% increase) on both +termination and forwarding scenarios, while also reducing the driver +memory footprint. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Replace "ldpaa" with "dpaa2" + +Replace all instances of "ldpaa"/"LDPAA" in the Ethernet driver +(names of functions, structures, macros, etc), with "dpaa2"/"DPAA2", +except for DPIO API function calls. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: rename ldpaa to dpaa2 + +Signed-off-by: Haiying Wang +(Stuart: this patch was split out from the origin global rename patch) +Signed-off-by: Stuart Yoder + +dpaa2-eth: Rename dpaa_io_query_fq_count to dpaa2_io_query_fq_count + +Signed-off-by: Cristian Sovaiala + +fsl-dpio: rename dpaa_* structure to dpaa2_* + +Signed-off-by: Haiying Wang + +dpaa2-eth, dpni, fsl-mc: Updates for MC0.8.0 + +Several changes need to be performed in sync for supporting +the newest MC version: +* Update mc-cmd.h +* Update the dpni binary interface to v6.0 +* Update the DPAA2 Eth driver to account for several API changes + +Signed-off-by: Ioana Radulescu + +staging: fsl-dpaa2: ethernet: add support for hardware timestamping + +Signed-off-by: Yangbo Lu + +fsl-dpaa2: eth: Do not set bpid in egress fd + +We don't do FD recycling on egress, BPID is therefore not necessary. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Amend buffer refill comment + +A change request has been pending for placing an upper bound to the +buffer replenish logic on Rx. However, short of practical alternatives, +resort to amending the relevant comment and rely on ksoftirqd to +guarantee interactivity. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Configure a taildrop threshold for each Rx frame queue. + +The selected value allows for Rx jumbo (10K) frames processing +while at the same time helps balance the system in the case of +IP forwarding. + +Also compute the number of buffers in the pool based on the TD +threshold to avoid starving some of the ingress queues in small +frames, high throughput scenarios. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Check objects' FLIB version + +Make sure we support the DPNI, DPCON and DPBP version, otherwise +abort probing early on and provide an error message. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Remove likely/unlikely from cold paths + +Signed-off-by: Cristian Sovaiala +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Remove __cold attribute + +Signed-off-by: Cristian Sovaiala + +fsl-dpaa2: eth: Replace netdev_XXX with dev_XXX before register_netdevice() + +Signed-off-by: Cristian Sovaiala +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Fix coccinelle issue + +drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c:687:1-36: WARNING: +Assignment of bool to 0/1 + +Signed-off-by: Cristian Sovaiala + +fsl-dpaa2: eth: Fix minor spelling issue + +Signed-off-by: Cristian Sovaiala + +fsl-dpaa2: eth: Add a couple of 'unlikely' on hot path + +Signed-off-by: Cristian Sovaiala +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Fix a bunch of minor issues found by static analysis tools + +As found by Klocworks and Checkpatch: + - Unused variables + - Integer type replacements + - Unchecked memory allocations + - Whitespace, alignment and newlining + +Signed-off-by: Cristian Sovaiala +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Remove "inline" keyword from static functions + +Signed-off-by: Cristian Sovaiala + +fsl-dpaa2: eth: Remove BUG/BUG_ONs + +Signed-off-by: Cristian Sovaiala +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Use NAPI_POLL_WEIGHT + +No need to define our own macro as long as we're using the +default value of 64. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Move dpaa2_eth_swa structure to header file + +It was the only structure defined inside dpaa2-eth.c + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Replace uintX_t with uX + +Signed-off-by: Ioana Radulescu +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Minor fixes & cosmetics + +- Make driver log level an int, because this is what + netif_msg_init expects. +- Remove driver description macro as it was used only once, + immediately after being defined +- Remove include comment + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Move bcast address setup to dpaa2_eth_netdev_init + +It seems to fit better there than directly in probe. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Fix DMA mapping bug + +During hashing/flow steering configuration via ethtool, we were +doing a DMA unmap from the wrong address. Fix the issue by using +the DMA address that was initially mapped. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Associate buffer counting to queues instead of cpu + +Move the buffer counters from being percpu variables to being +associated with QMan channels. This is more natural as we need +to dimension the buffer pool count based on distribution size +rather than number of online cores. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Provide driver and fw version to ethtool + +Read fw version from the MC and interpret DPNI FLib major.minor as the +driver's version. Report these in 'ethool -i'. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Remove dependency on GCOV_KERNEL + +Signed-off-by: Cristian Sovaiala + +fsl-dpaa2: eth: Remove FIXME/TODO comments from the code + +Some of the concerns had already been addressed, a couple are being +fixed in place. +Left a few TODOs related to the flow-steering code, which needs to be +revisited before upstreaming anyway. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Remove forward declarations + +Instead move the functions such that they are defined prior to +being used. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Remove dead code in IRQ handler + +If any of those conditions were met, it is unlikely we'd ever be there +in the first place. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Remove dpaa2_dpbp_drain() + +Its sole caller was __dpaa2_dpbp_free(), so move its content and get rid +of one function call. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Remove duplicate define + +We somehow ended up with two defines for the maximum number +of tx queues. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Move header comment to .c file + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Make DPCON allocation failure produce a benign message + +Number of DPCONs may be smaller than the number of CPUs in a number of +valid scenarios. One such scenario is when the DPNI's distribution width +is smaller than the number of cores and we just don't want to +over-allocate DPCONs. +Make the DPCON allocation failure less menacing by changing the logged +message. + +While at it, remove a unused parameter in function prototype. + +Signed-off-by: Bogdan Hamciuc + +dpaa2 eth: irq update + +Signed-off-by: Stuart Yoder + +Conflicts: + drivers/staging/Kconfig + drivers/staging/Makefile +--- + MAINTAINERS | 15 + + drivers/staging/Kconfig | 2 + + drivers/staging/Makefile | 1 + + drivers/staging/fsl-dpaa2/Kconfig | 11 + + drivers/staging/fsl-dpaa2/Makefile | 5 + + drivers/staging/fsl-dpaa2/ethernet/Kconfig | 42 + + drivers/staging/fsl-dpaa2/ethernet/Makefile | 21 + + .../staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c | 319 +++ + .../staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.h | 61 + + .../staging/fsl-dpaa2/ethernet/dpaa2-eth-trace.h | 185 ++ + drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 2793 ++++++++++++++++++++ + drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 366 +++ + drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c | 882 +++++++ + drivers/staging/fsl-dpaa2/ethernet/dpkg.h | 175 ++ + drivers/staging/fsl-dpaa2/ethernet/dpni-cmd.h | 1058 ++++++++ + drivers/staging/fsl-dpaa2/ethernet/dpni.c | 1907 +++++++++++++ + drivers/staging/fsl-dpaa2/ethernet/dpni.h | 2581 ++++++++++++++++++ + drivers/staging/fsl-mc/include/mc-cmd.h | 5 +- + drivers/staging/fsl-mc/include/net.h | 481 ++++ + net/core/pktgen.c | 1 + + 20 files changed, 10910 insertions(+), 1 deletion(-) + create mode 100644 drivers/staging/fsl-dpaa2/Kconfig + create mode 100644 drivers/staging/fsl-dpaa2/Makefile + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/Kconfig + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/Makefile + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.h + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-trace.h + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpkg.h + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpni-cmd.h + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpni.c + create mode 100644 drivers/staging/fsl-dpaa2/ethernet/dpni.h + create mode 100644 drivers/staging/fsl-mc/include/net.h + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -4539,6 +4539,21 @@ L: linux-kernel@vger.kernel.org + S: Maintained + F: drivers/staging/fsl-mc/ + ++FREESCALE DPAA2 ETH DRIVER ++M: Ioana Radulescu ++M: Bogdan Hamciuc ++M: Cristian Sovaiala ++L: linux-kernel@vger.kernel.org ++S: Maintained ++F: drivers/staging/fsl-dpaa2/ethernet/ ++ ++FREESCALE QORIQ MANAGEMENT COMPLEX RESTOOL DRIVER ++M: Lijun Pan ++L: linux-kernel@vger.kernel.org ++S: Maintained ++F: drivers/staging/fsl-mc/bus/mc-ioctl.h ++F: drivers/staging/fsl-mc/bus/mc-restool.c ++ + FREEVXFS FILESYSTEM + M: Christoph Hellwig + W: ftp://ftp.openlinux.org/pub/people/hch/vxfs +--- a/drivers/staging/Kconfig ++++ b/drivers/staging/Kconfig +@@ -114,4 +114,6 @@ source "drivers/staging/most/Kconfig" + + source "drivers/staging/fsl_ppfe/Kconfig" + ++source "drivers/staging/fsl-dpaa2/Kconfig" ++ + endif # STAGING +--- a/drivers/staging/Makefile ++++ b/drivers/staging/Makefile +@@ -49,3 +49,4 @@ obj-$(CONFIG_FSL_DPA) += fsl_q + obj-$(CONFIG_WILC1000) += wilc1000/ + obj-$(CONFIG_MOST) += most/ + obj-$(CONFIG_FSL_PPFE) += fsl_ppfe/ ++obj-$(CONFIG_FSL_DPAA2) += fsl-dpaa2/ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/Kconfig +@@ -0,0 +1,11 @@ ++# ++# Freescale device configuration ++# ++ ++config FSL_DPAA2 ++ bool "Freescale DPAA2 devices" ++ depends on FSL_MC_BUS ++ ---help--- ++ Build drivers for Freescale DataPath Acceleration Architecture (DPAA2) family of SoCs. ++# TODO move DPIO driver in-here? ++source "drivers/staging/fsl-dpaa2/ethernet/Kconfig" +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/Makefile +@@ -0,0 +1,5 @@ ++# ++# Makefile for the Freescale network device drivers. ++# ++ ++obj-$(CONFIG_FSL_DPAA2_ETH) += ethernet/ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/Kconfig +@@ -0,0 +1,42 @@ ++# ++# Freescale DPAA Ethernet driver configuration ++# ++# Copyright (C) 2014-2015 Freescale Semiconductor, Inc. ++# ++# This file is released under the GPLv2 ++# ++ ++menuconfig FSL_DPAA2_ETH ++ tristate "Freescale DPAA2 Ethernet" ++ depends on FSL_DPAA2 && FSL_MC_BUS && FSL_MC_DPIO ++ select FSL_DPAA2_MAC ++ default y ++ ---help--- ++ Freescale Data Path Acceleration Architecture Ethernet ++ driver, using the Freescale MC bus driver. ++ ++if FSL_DPAA2_ETH ++config FSL_DPAA2_ETH_LINK_POLL ++ bool "Use polling mode for link state" ++ default n ++ ---help--- ++ Poll for detecting link state changes instead of using ++ interrupts. ++ ++config FSL_DPAA2_ETH_USE_ERR_QUEUE ++ bool "Enable Rx error queue" ++ default n ++ ---help--- ++ Allow Rx error frames to be enqueued on an error queue ++ and processed by the driver (by default they are dropped ++ in hardware). ++ This may impact performance, recommended for debugging ++ purposes only. ++ ++config FSL_DPAA2_ETH_DEBUGFS ++ depends on DEBUG_FS && FSL_QBMAN_DEBUG ++ bool "Enable debugfs support" ++ default n ++ ---help--- ++ Enable advanced statistics through debugfs interface. ++endif +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/Makefile +@@ -0,0 +1,21 @@ ++# ++# Makefile for the Freescale DPAA Ethernet controllers ++# ++# Copyright (C) 2014-2015 Freescale Semiconductor, Inc. ++# ++# This file is released under the GPLv2 ++# ++ ++ccflags-y += -DVERSION=\"\" ++ ++obj-$(CONFIG_FSL_DPAA2_ETH) += fsl-dpaa2-eth.o ++ ++fsl-dpaa2-eth-objs := dpaa2-eth.o dpaa2-ethtool.o dpni.o ++fsl-dpaa2-eth-${CONFIG_FSL_DPAA2_ETH_DEBUGFS} += dpaa2-eth-debugfs.o ++ ++#Needed by the tracing framework ++CFLAGS_dpaa2-eth.o := -I$(src) ++ ++ifeq ($(CONFIG_FSL_DPAA2_ETH_GCOV),y) ++ GCOV_PROFILE := y ++endif +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c +@@ -0,0 +1,319 @@ ++ ++/* Copyright 2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++#include ++#include ++#include "dpaa2-eth.h" ++#include "dpaa2-eth-debugfs.h" ++ ++#define DPAA2_ETH_DBG_ROOT "dpaa2-eth" ++ ++ ++static struct dentry *dpaa2_dbg_root; ++ ++static int dpaa2_dbg_cpu_show(struct seq_file *file, void *offset) ++{ ++ struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)file->private; ++ struct rtnl_link_stats64 *stats; ++ struct dpaa2_eth_stats *extras; ++ int i; ++ ++ seq_printf(file, "Per-CPU stats for %s\n", priv->net_dev->name); ++ seq_printf(file, "%s%16s%16s%16s%16s%16s%16s%16s%16s\n", ++ "CPU", "Rx", "Rx Err", "Rx SG", "Tx", "Tx Err", "Tx conf", ++ "Tx SG", "Enq busy"); ++ ++ for_each_online_cpu(i) { ++ stats = per_cpu_ptr(priv->percpu_stats, i); ++ extras = per_cpu_ptr(priv->percpu_extras, i); ++ seq_printf(file, "%3d%16llu%16llu%16llu%16llu%16llu%16llu%16llu%16llu\n", ++ i, ++ stats->rx_packets, ++ stats->rx_errors, ++ extras->rx_sg_frames, ++ stats->tx_packets, ++ stats->tx_errors, ++ extras->tx_conf_frames, ++ extras->tx_sg_frames, ++ extras->tx_portal_busy); ++ } ++ ++ return 0; ++} ++ ++static int dpaa2_dbg_cpu_open(struct inode *inode, struct file *file) ++{ ++ int err; ++ struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)inode->i_private; ++ ++ err = single_open(file, dpaa2_dbg_cpu_show, priv); ++ if (err < 0) ++ netdev_err(priv->net_dev, "single_open() failed\n"); ++ ++ return err; ++} ++ ++static const struct file_operations dpaa2_dbg_cpu_ops = { ++ .open = dpaa2_dbg_cpu_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static char *fq_type_to_str(struct dpaa2_eth_fq *fq) ++{ ++ switch (fq->type) { ++ case DPAA2_RX_FQ: ++ return "Rx"; ++ case DPAA2_TX_CONF_FQ: ++ return "Tx conf"; ++ case DPAA2_RX_ERR_FQ: ++ return "Rx err"; ++ default: ++ return "N/A"; ++ } ++} ++ ++static int dpaa2_dbg_fqs_show(struct seq_file *file, void *offset) ++{ ++ struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)file->private; ++ struct dpaa2_eth_fq *fq; ++ u32 fcnt, bcnt; ++ int i, err; ++ ++ seq_printf(file, "FQ stats for %s:\n", priv->net_dev->name); ++ seq_printf(file, "%s%16s%16s%16s%16s\n", ++ "VFQID", "CPU", "Type", "Frames", "Pending frames"); ++ ++ for (i = 0; i < priv->num_fqs; i++) { ++ fq = &priv->fq[i]; ++ err = dpaa2_io_query_fq_count(NULL, fq->fqid, &fcnt, &bcnt); ++ if (err) ++ fcnt = 0; ++ ++ seq_printf(file, "%5d%16d%16s%16llu%16u\n", ++ fq->fqid, ++ fq->target_cpu, ++ fq_type_to_str(fq), ++ fq->stats.frames, ++ fcnt); ++ } ++ ++ return 0; ++} ++ ++static int dpaa2_dbg_fqs_open(struct inode *inode, struct file *file) ++{ ++ int err; ++ struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)inode->i_private; ++ ++ err = single_open(file, dpaa2_dbg_fqs_show, priv); ++ if (err < 0) ++ netdev_err(priv->net_dev, "single_open() failed\n"); ++ ++ return err; ++} ++ ++static const struct file_operations dpaa2_dbg_fq_ops = { ++ .open = dpaa2_dbg_fqs_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static int dpaa2_dbg_ch_show(struct seq_file *file, void *offset) ++{ ++ struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)file->private; ++ struct dpaa2_eth_channel *ch; ++ int i; ++ ++ seq_printf(file, "Channel stats for %s:\n", priv->net_dev->name); ++ seq_printf(file, "%s%16s%16s%16s%16s%16s\n", ++ "CHID", "CPU", "Deq busy", "Frames", "CDANs", ++ "Avg frm/CDAN"); ++ ++ for (i = 0; i < priv->num_channels; i++) { ++ ch = priv->channel[i]; ++ seq_printf(file, "%4d%16d%16llu%16llu%16llu%16llu\n", ++ ch->ch_id, ++ ch->nctx.desired_cpu, ++ ch->stats.dequeue_portal_busy, ++ ch->stats.frames, ++ ch->stats.cdan, ++ ch->stats.frames / ch->stats.cdan); ++ } ++ ++ return 0; ++} ++ ++static int dpaa2_dbg_ch_open(struct inode *inode, struct file *file) ++{ ++ int err; ++ struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)inode->i_private; ++ ++ err = single_open(file, dpaa2_dbg_ch_show, priv); ++ if (err < 0) ++ netdev_err(priv->net_dev, "single_open() failed\n"); ++ ++ return err; ++} ++ ++static const struct file_operations dpaa2_dbg_ch_ops = { ++ .open = dpaa2_dbg_ch_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static ssize_t dpaa2_dbg_reset_write(struct file *file, const char __user *buf, ++ size_t count, loff_t *offset) ++{ ++ struct dpaa2_eth_priv *priv = file->private_data; ++ struct rtnl_link_stats64 *percpu_stats; ++ struct dpaa2_eth_stats *percpu_extras; ++ struct dpaa2_eth_fq *fq; ++ struct dpaa2_eth_channel *ch; ++ int i; ++ ++ for_each_online_cpu(i) { ++ percpu_stats = per_cpu_ptr(priv->percpu_stats, i); ++ memset(percpu_stats, 0, sizeof(*percpu_stats)); ++ ++ percpu_extras = per_cpu_ptr(priv->percpu_extras, i); ++ memset(percpu_extras, 0, sizeof(*percpu_extras)); ++ } ++ ++ for (i = 0; i < priv->num_fqs; i++) { ++ fq = &priv->fq[i]; ++ memset(&fq->stats, 0, sizeof(fq->stats)); ++ } ++ ++ for_each_cpu(i, &priv->dpio_cpumask) { ++ ch = priv->channel[i]; ++ memset(&ch->stats, 0, sizeof(ch->stats)); ++ } ++ ++ return count; ++} ++ ++static const struct file_operations dpaa2_dbg_reset_ops = { ++ .open = simple_open, ++ .write = dpaa2_dbg_reset_write, ++}; ++ ++void dpaa2_dbg_add(struct dpaa2_eth_priv *priv) ++{ ++ if (!dpaa2_dbg_root) ++ return; ++ ++ /* Create a directory for the interface */ ++ priv->dbg.dir = debugfs_create_dir(priv->net_dev->name, ++ dpaa2_dbg_root); ++ if (!priv->dbg.dir) { ++ netdev_err(priv->net_dev, "debugfs_create_dir() failed\n"); ++ return; ++ } ++ ++ /* per-cpu stats file */ ++ priv->dbg.cpu_stats = debugfs_create_file("cpu_stats", S_IRUGO, ++ priv->dbg.dir, priv, ++ &dpaa2_dbg_cpu_ops); ++ if (!priv->dbg.cpu_stats) { ++ netdev_err(priv->net_dev, "debugfs_create_file() failed\n"); ++ goto err_cpu_stats; ++ } ++ ++ /* per-fq stats file */ ++ priv->dbg.fq_stats = debugfs_create_file("fq_stats", S_IRUGO, ++ priv->dbg.dir, priv, ++ &dpaa2_dbg_fq_ops); ++ if (!priv->dbg.fq_stats) { ++ netdev_err(priv->net_dev, "debugfs_create_file() failed\n"); ++ goto err_fq_stats; ++ } ++ ++ /* per-fq stats file */ ++ priv->dbg.ch_stats = debugfs_create_file("ch_stats", S_IRUGO, ++ priv->dbg.dir, priv, ++ &dpaa2_dbg_ch_ops); ++ if (!priv->dbg.fq_stats) { ++ netdev_err(priv->net_dev, "debugfs_create_file() failed\n"); ++ goto err_ch_stats; ++ } ++ ++ /* reset stats */ ++ priv->dbg.reset_stats = debugfs_create_file("reset_stats", S_IWUSR, ++ priv->dbg.dir, priv, ++ &dpaa2_dbg_reset_ops); ++ if (!priv->dbg.reset_stats) { ++ netdev_err(priv->net_dev, "debugfs_create_file() failed\n"); ++ goto err_reset_stats; ++ } ++ ++ return; ++ ++err_reset_stats: ++ debugfs_remove(priv->dbg.ch_stats); ++err_ch_stats: ++ debugfs_remove(priv->dbg.fq_stats); ++err_fq_stats: ++ debugfs_remove(priv->dbg.cpu_stats); ++err_cpu_stats: ++ debugfs_remove(priv->dbg.dir); ++} ++ ++void dpaa2_dbg_remove(struct dpaa2_eth_priv *priv) ++{ ++ debugfs_remove(priv->dbg.reset_stats); ++ debugfs_remove(priv->dbg.fq_stats); ++ debugfs_remove(priv->dbg.ch_stats); ++ debugfs_remove(priv->dbg.cpu_stats); ++ debugfs_remove(priv->dbg.dir); ++} ++ ++void dpaa2_eth_dbg_init(void) ++{ ++ dpaa2_dbg_root = debugfs_create_dir(DPAA2_ETH_DBG_ROOT, NULL); ++ if (!dpaa2_dbg_root) { ++ pr_err("DPAA2-ETH: debugfs create failed\n"); ++ return; ++ } ++ ++ pr_info("DPAA2-ETH: debugfs created\n"); ++} ++ ++void __exit dpaa2_eth_dbg_exit(void) ++{ ++ debugfs_remove(dpaa2_dbg_root); ++} ++ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.h +@@ -0,0 +1,61 @@ ++/* Copyright 2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#ifndef DPAA2_ETH_DEBUGFS_H ++#define DPAA2_ETH_DEBUGFS_H ++ ++#include ++#include "dpaa2-eth.h" ++ ++extern struct dpaa2_eth_priv *priv; ++ ++struct dpaa2_debugfs { ++ struct dentry *dir; ++ struct dentry *fq_stats; ++ struct dentry *ch_stats; ++ struct dentry *cpu_stats; ++ struct dentry *reset_stats; ++}; ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_DEBUGFS ++void dpaa2_eth_dbg_init(void); ++void dpaa2_eth_dbg_exit(void); ++void dpaa2_dbg_add(struct dpaa2_eth_priv *priv); ++void dpaa2_dbg_remove(struct dpaa2_eth_priv *priv); ++#else ++static inline void dpaa2_eth_dbg_init(void) {} ++static inline void dpaa2_eth_dbg_exit(void) {} ++static inline void dpaa2_dbg_add(struct dpaa2_eth_priv *priv) {} ++static inline void dpaa2_dbg_remove(struct dpaa2_eth_priv *priv) {} ++#endif /* CONFIG_FSL_DPAA2_ETH_DEBUGFS */ ++ ++#endif /* DPAA2_ETH_DEBUGFS_H */ ++ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-trace.h +@@ -0,0 +1,185 @@ ++/* Copyright 2014-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#undef TRACE_SYSTEM ++#define TRACE_SYSTEM dpaa2_eth ++ ++#if !defined(_DPAA2_ETH_TRACE_H) || defined(TRACE_HEADER_MULTI_READ) ++#define _DPAA2_ETH_TRACE_H ++ ++#include ++#include ++#include "dpaa2-eth.h" ++#include ++ ++#define TR_FMT "[%s] fd: addr=0x%llx, len=%u, off=%u" ++/* trace_printk format for raw buffer event class */ ++#define TR_BUF_FMT "[%s] vaddr=%p size=%zu dma_addr=%pad map_size=%zu bpid=%d" ++ ++/* This is used to declare a class of events. ++ * individual events of this type will be defined below. ++ */ ++ ++/* Store details about a frame descriptor */ ++DECLARE_EVENT_CLASS(dpaa2_eth_fd, ++ /* Trace function prototype */ ++ TP_PROTO(struct net_device *netdev, ++ const struct dpaa2_fd *fd), ++ ++ /* Repeat argument list here */ ++ TP_ARGS(netdev, fd), ++ ++ /* A structure containing the relevant information we want ++ * to record. Declare name and type for each normal element, ++ * name, type and size for arrays. Use __string for variable ++ * length strings. ++ */ ++ TP_STRUCT__entry( ++ __field(u64, fd_addr) ++ __field(u32, fd_len) ++ __field(u16, fd_offset) ++ __string(name, netdev->name) ++ ), ++ ++ /* The function that assigns values to the above declared ++ * fields ++ */ ++ TP_fast_assign( ++ __entry->fd_addr = dpaa2_fd_get_addr(fd); ++ __entry->fd_len = dpaa2_fd_get_len(fd); ++ __entry->fd_offset = dpaa2_fd_get_offset(fd); ++ __assign_str(name, netdev->name); ++ ), ++ ++ /* This is what gets printed when the trace event is ++ * triggered. ++ */ ++ TP_printk(TR_FMT, ++ __get_str(name), ++ __entry->fd_addr, ++ __entry->fd_len, ++ __entry->fd_offset) ++); ++ ++/* Now declare events of the above type. Format is: ++ * DEFINE_EVENT(class, name, proto, args), with proto and args same as for class ++ */ ++ ++/* Tx (egress) fd */ ++DEFINE_EVENT(dpaa2_eth_fd, dpaa2_tx_fd, ++ TP_PROTO(struct net_device *netdev, ++ const struct dpaa2_fd *fd), ++ ++ TP_ARGS(netdev, fd) ++); ++ ++/* Rx fd */ ++DEFINE_EVENT(dpaa2_eth_fd, dpaa2_rx_fd, ++ TP_PROTO(struct net_device *netdev, ++ const struct dpaa2_fd *fd), ++ ++ TP_ARGS(netdev, fd) ++); ++ ++/* Tx confirmation fd */ ++DEFINE_EVENT(dpaa2_eth_fd, dpaa2_tx_conf_fd, ++ TP_PROTO(struct net_device *netdev, ++ const struct dpaa2_fd *fd), ++ ++ TP_ARGS(netdev, fd) ++); ++ ++/* Log data about raw buffers. Useful for tracing DPBP content. */ ++TRACE_EVENT(dpaa2_eth_buf_seed, ++ /* Trace function prototype */ ++ TP_PROTO(struct net_device *netdev, ++ /* virtual address and size */ ++ void *vaddr, ++ size_t size, ++ /* dma map address and size */ ++ dma_addr_t dma_addr, ++ size_t map_size, ++ /* buffer pool id, if relevant */ ++ u16 bpid), ++ ++ /* Repeat argument list here */ ++ TP_ARGS(netdev, vaddr, size, dma_addr, map_size, bpid), ++ ++ /* A structure containing the relevant information we want ++ * to record. Declare name and type for each normal element, ++ * name, type and size for arrays. Use __string for variable ++ * length strings. ++ */ ++ TP_STRUCT__entry( ++ __field(void *, vaddr) ++ __field(size_t, size) ++ __field(dma_addr_t, dma_addr) ++ __field(size_t, map_size) ++ __field(u16, bpid) ++ __string(name, netdev->name) ++ ), ++ ++ /* The function that assigns values to the above declared ++ * fields ++ */ ++ TP_fast_assign( ++ __entry->vaddr = vaddr; ++ __entry->size = size; ++ __entry->dma_addr = dma_addr; ++ __entry->map_size = map_size; ++ __entry->bpid = bpid; ++ __assign_str(name, netdev->name); ++ ), ++ ++ /* This is what gets printed when the trace event is ++ * triggered. ++ */ ++ TP_printk(TR_BUF_FMT, ++ __get_str(name), ++ __entry->vaddr, ++ __entry->size, ++ &__entry->dma_addr, ++ __entry->map_size, ++ __entry->bpid) ++); ++ ++/* If only one event of a certain type needs to be declared, use TRACE_EVENT(). ++ * The syntax is the same as for DECLARE_EVENT_CLASS(). ++ */ ++ ++#endif /* _DPAA2_ETH_TRACE_H */ ++ ++/* This must be outside ifdef _DPAA2_ETH_TRACE_H */ ++#undef TRACE_INCLUDE_PATH ++#define TRACE_INCLUDE_PATH . ++#undef TRACE_INCLUDE_FILE ++#define TRACE_INCLUDE_FILE dpaa2-eth-trace ++#include +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c +@@ -0,0 +1,2793 @@ ++/* Copyright 2014-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../../fsl-mc/include/mc.h" ++#include "../../fsl-mc/include/mc-sys.h" ++#include "dpaa2-eth.h" ++ ++/* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files ++ * using trace events only need to #include ++ */ ++#define CREATE_TRACE_POINTS ++#include "dpaa2-eth-trace.h" ++ ++MODULE_LICENSE("Dual BSD/GPL"); ++MODULE_AUTHOR("Freescale Semiconductor, Inc"); ++MODULE_DESCRIPTION("Freescale DPAA2 Ethernet Driver"); ++ ++static int debug = -1; ++module_param(debug, int, S_IRUGO); ++MODULE_PARM_DESC(debug, "Module/Driver verbosity level"); ++ ++/* Oldest DPAA2 objects version we are compatible with */ ++#define DPAA2_SUPPORTED_DPNI_VERSION 6 ++#define DPAA2_SUPPORTED_DPBP_VERSION 2 ++#define DPAA2_SUPPORTED_DPCON_VERSION 2 ++ ++/* Iterate through the cpumask in a round-robin fashion. */ ++#define cpumask_rr(cpu, maskptr) \ ++do { \ ++ (cpu) = cpumask_next((cpu), (maskptr)); \ ++ if ((cpu) >= nr_cpu_ids) \ ++ (cpu) = cpumask_first((maskptr)); \ ++} while (0) ++ ++static void dpaa2_eth_rx_csum(struct dpaa2_eth_priv *priv, ++ u32 fd_status, ++ struct sk_buff *skb) ++{ ++ skb_checksum_none_assert(skb); ++ ++ /* HW checksum validation is disabled, nothing to do here */ ++ if (!(priv->net_dev->features & NETIF_F_RXCSUM)) ++ return; ++ ++ /* Read checksum validation bits */ ++ if (!((fd_status & DPAA2_ETH_FAS_L3CV) && ++ (fd_status & DPAA2_ETH_FAS_L4CV))) ++ return; ++ ++ /* Inform the stack there's no need to compute L3/L4 csum anymore */ ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++} ++ ++/* Free a received FD. ++ * Not to be used for Tx conf FDs or on any other paths. ++ */ ++static void dpaa2_eth_free_rx_fd(struct dpaa2_eth_priv *priv, ++ const struct dpaa2_fd *fd, ++ void *vaddr) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ dma_addr_t addr = dpaa2_fd_get_addr(fd); ++ u8 fd_format = dpaa2_fd_get_format(fd); ++ ++ if (fd_format == dpaa2_fd_sg) { ++ struct dpaa2_sg_entry *sgt = vaddr + dpaa2_fd_get_offset(fd); ++ void *sg_vaddr; ++ int i; ++ ++ for (i = 0; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) { ++ dpaa2_sg_le_to_cpu(&sgt[i]); ++ ++ addr = dpaa2_sg_get_addr(&sgt[i]); ++ dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUFFER_SIZE, ++ DMA_FROM_DEVICE); ++ ++ sg_vaddr = phys_to_virt(addr); ++ put_page(virt_to_head_page(sg_vaddr)); ++ ++ if (dpaa2_sg_is_final(&sgt[i])) ++ break; ++ } ++ } ++ ++ put_page(virt_to_head_page(vaddr)); ++} ++ ++/* Build a linear skb based on a single-buffer frame descriptor */ ++static struct sk_buff *dpaa2_eth_build_linear_skb(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ const struct dpaa2_fd *fd, ++ void *fd_vaddr) ++{ ++ struct sk_buff *skb = NULL; ++ u16 fd_offset = dpaa2_fd_get_offset(fd); ++ u32 fd_length = dpaa2_fd_get_len(fd); ++ ++ skb = build_skb(fd_vaddr, DPAA2_ETH_RX_BUFFER_SIZE + ++ SKB_DATA_ALIGN(sizeof(struct skb_shared_info))); ++ if (unlikely(!skb)) { ++ netdev_err(priv->net_dev, "build_skb() failed\n"); ++ return NULL; ++ } ++ ++ skb_reserve(skb, fd_offset); ++ skb_put(skb, fd_length); ++ ++ ch->buf_count--; ++ ++ return skb; ++} ++ ++/* Build a non linear (fragmented) skb based on a S/G table */ ++static struct sk_buff *dpaa2_eth_build_frag_skb(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ struct dpaa2_sg_entry *sgt) ++{ ++ struct sk_buff *skb = NULL; ++ struct device *dev = priv->net_dev->dev.parent; ++ void *sg_vaddr; ++ dma_addr_t sg_addr; ++ u16 sg_offset; ++ u32 sg_length; ++ struct page *page, *head_page; ++ int page_offset; ++ int i; ++ ++ for (i = 0; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) { ++ struct dpaa2_sg_entry *sge = &sgt[i]; ++ ++ dpaa2_sg_le_to_cpu(sge); ++ ++ /* We don't support anything else yet! */ ++ if (unlikely(dpaa2_sg_get_format(sge) != dpaa2_sg_single)) { ++ dev_warn_once(dev, "Unsupported S/G entry format: %d\n", ++ dpaa2_sg_get_format(sge)); ++ return NULL; ++ } ++ ++ /* Get the address, offset and length from the S/G entry */ ++ sg_addr = dpaa2_sg_get_addr(sge); ++ dma_unmap_single(dev, sg_addr, DPAA2_ETH_RX_BUFFER_SIZE, ++ DMA_FROM_DEVICE); ++ if (unlikely(dma_mapping_error(dev, sg_addr))) { ++ netdev_err(priv->net_dev, "DMA unmap failed\n"); ++ return NULL; ++ } ++ sg_vaddr = phys_to_virt(sg_addr); ++ sg_length = dpaa2_sg_get_len(sge); ++ ++ if (i == 0) { ++ /* We build the skb around the first data buffer */ ++ skb = build_skb(sg_vaddr, DPAA2_ETH_RX_BUFFER_SIZE + ++ SKB_DATA_ALIGN(sizeof(struct skb_shared_info))); ++ if (unlikely(!skb)) { ++ netdev_err(priv->net_dev, "build_skb failed\n"); ++ return NULL; ++ } ++ sg_offset = dpaa2_sg_get_offset(sge); ++ skb_reserve(skb, sg_offset); ++ skb_put(skb, sg_length); ++ } else { ++ /* Subsequent data in SGEntries are stored at ++ * offset 0 in their buffers, we don't need to ++ * compute sg_offset. ++ */ ++ WARN_ONCE(dpaa2_sg_get_offset(sge) != 0, ++ "Non-zero offset in SGE[%d]!\n", i); ++ ++ /* Rest of the data buffers are stored as skb frags */ ++ page = virt_to_page(sg_vaddr); ++ head_page = virt_to_head_page(sg_vaddr); ++ ++ /* Offset in page (which may be compound) */ ++ page_offset = ((unsigned long)sg_vaddr & ++ (PAGE_SIZE - 1)) + ++ (page_address(page) - page_address(head_page)); ++ ++ skb_add_rx_frag(skb, i - 1, head_page, page_offset, ++ sg_length, DPAA2_ETH_RX_BUFFER_SIZE); ++ } ++ ++ if (dpaa2_sg_is_final(sge)) ++ break; ++ } ++ ++ /* Count all data buffers + sgt buffer */ ++ ch->buf_count -= i + 2; ++ ++ return skb; ++} ++ ++static void dpaa2_eth_rx(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ const struct dpaa2_fd *fd, ++ struct napi_struct *napi) ++{ ++ dma_addr_t addr = dpaa2_fd_get_addr(fd); ++ u8 fd_format = dpaa2_fd_get_format(fd); ++ void *vaddr; ++ struct sk_buff *skb; ++ struct rtnl_link_stats64 *percpu_stats; ++ struct dpaa2_eth_stats *percpu_extras; ++ struct device *dev = priv->net_dev->dev.parent; ++ struct dpaa2_fas *fas; ++ u32 status = 0; ++ ++ /* Tracing point */ ++ trace_dpaa2_rx_fd(priv->net_dev, fd); ++ ++ dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUFFER_SIZE, DMA_FROM_DEVICE); ++ vaddr = phys_to_virt(addr); ++ ++ prefetch(vaddr + priv->buf_layout.private_data_size); ++ prefetch(vaddr + dpaa2_fd_get_offset(fd)); ++ ++ percpu_stats = this_cpu_ptr(priv->percpu_stats); ++ percpu_extras = this_cpu_ptr(priv->percpu_extras); ++ ++ if (fd_format == dpaa2_fd_single) { ++ skb = dpaa2_eth_build_linear_skb(priv, ch, fd, vaddr); ++ } else if (fd_format == dpaa2_fd_sg) { ++ struct dpaa2_sg_entry *sgt = ++ vaddr + dpaa2_fd_get_offset(fd); ++ skb = dpaa2_eth_build_frag_skb(priv, ch, sgt); ++ put_page(virt_to_head_page(vaddr)); ++ percpu_extras->rx_sg_frames++; ++ percpu_extras->rx_sg_bytes += dpaa2_fd_get_len(fd); ++ } else { ++ /* We don't support any other format */ ++ netdev_err(priv->net_dev, "Received invalid frame format\n"); ++ goto err_frame_format; ++ } ++ ++ if (unlikely(!skb)) { ++ dev_err_once(dev, "error building skb\n"); ++ goto err_build_skb; ++ } ++ ++ prefetch(skb->data); ++ ++ if (priv->ts_rx_en) { ++ struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb); ++ u64 *ns = (u64 *) (vaddr + ++ priv->buf_layout.private_data_size + ++ sizeof(struct dpaa2_fas)); ++ ++ *ns = DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS * (*ns); ++ memset(shhwtstamps, 0, sizeof(*shhwtstamps)); ++ shhwtstamps->hwtstamp = ns_to_ktime(*ns); ++ } ++ ++ /* Check if we need to validate the L4 csum */ ++ if (likely(fd->simple.frc & DPAA2_FD_FRC_FASV)) { ++ fas = (struct dpaa2_fas *) ++ (vaddr + priv->buf_layout.private_data_size); ++ status = le32_to_cpu(fas->status); ++ dpaa2_eth_rx_csum(priv, status, skb); ++ } ++ ++ skb->protocol = eth_type_trans(skb, priv->net_dev); ++ ++ percpu_stats->rx_packets++; ++ percpu_stats->rx_bytes += skb->len; ++ ++ if (priv->net_dev->features & NETIF_F_GRO) ++ napi_gro_receive(napi, skb); ++ else ++ netif_receive_skb(skb); ++ ++ return; ++err_frame_format: ++err_build_skb: ++ dpaa2_eth_free_rx_fd(priv, fd, vaddr); ++ percpu_stats->rx_dropped++; ++} ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE ++static void dpaa2_eth_rx_err(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ const struct dpaa2_fd *fd, ++ struct napi_struct *napi __always_unused) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ dma_addr_t addr = dpaa2_fd_get_addr(fd); ++ void *vaddr; ++ struct rtnl_link_stats64 *percpu_stats; ++ struct dpaa2_fas *fas; ++ u32 status = 0; ++ ++ dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUFFER_SIZE, DMA_FROM_DEVICE); ++ vaddr = phys_to_virt(addr); ++ ++ if (fd->simple.frc & DPAA2_FD_FRC_FASV) { ++ fas = (struct dpaa2_fas *) ++ (vaddr + priv->buf_layout.private_data_size); ++ status = le32_to_cpu(fas->status); ++ ++ /* All frames received on this queue should have at least ++ * one of the Rx error bits set */ ++ WARN_ON_ONCE((status & DPAA2_ETH_RX_ERR_MASK) == 0); ++ netdev_dbg(priv->net_dev, "Rx frame error: 0x%08x\n", ++ status & DPAA2_ETH_RX_ERR_MASK); ++ } ++ dpaa2_eth_free_rx_fd(priv, fd, vaddr); ++ ++ percpu_stats = this_cpu_ptr(priv->percpu_stats); ++ percpu_stats->rx_errors++; ++} ++#endif ++ ++/* Consume all frames pull-dequeued into the store. This is the simplest way to ++ * make sure we don't accidentally issue another volatile dequeue which would ++ * overwrite (leak) frames already in the store. ++ * ++ * Observance of NAPI budget is not our concern, leaving that to the caller. ++ */ ++static int dpaa2_eth_store_consume(struct dpaa2_eth_channel *ch) ++{ ++ struct dpaa2_eth_priv *priv = ch->priv; ++ struct dpaa2_eth_fq *fq; ++ struct dpaa2_dq *dq; ++ const struct dpaa2_fd *fd; ++ int cleaned = 0; ++ int is_last; ++ ++ do { ++ dq = dpaa2_io_store_next(ch->store, &is_last); ++ if (unlikely(!dq)) { ++ if (unlikely(!is_last)) { ++ netdev_dbg(priv->net_dev, ++ "Channel %d reqturned no valid frames\n", ++ ch->ch_id); ++ /* MUST retry until we get some sort of ++ * valid response token (be it "empty dequeue" ++ * or a valid frame). ++ */ ++ continue; ++ } ++ break; ++ } ++ ++ /* Obtain FD and process it */ ++ fd = dpaa2_dq_fd(dq); ++ fq = (struct dpaa2_eth_fq *)dpaa2_dq_fqd_ctx(dq); ++ fq->stats.frames++; ++ ++ fq->consume(priv, ch, fd, &ch->napi); ++ cleaned++; ++ } while (!is_last); ++ ++ return cleaned; ++} ++ ++static int dpaa2_eth_build_sg_fd(struct dpaa2_eth_priv *priv, ++ struct sk_buff *skb, ++ struct dpaa2_fd *fd) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ void *sgt_buf = NULL; ++ dma_addr_t addr; ++ int nr_frags = skb_shinfo(skb)->nr_frags; ++ struct dpaa2_sg_entry *sgt; ++ int i, j, err; ++ int sgt_buf_size; ++ struct scatterlist *scl, *crt_scl; ++ int num_sg; ++ int num_dma_bufs; ++ struct dpaa2_eth_swa *bps; ++ ++ /* Create and map scatterlist. ++ * We don't advertise NETIF_F_FRAGLIST, so skb_to_sgvec() will not have ++ * to go beyond nr_frags+1. ++ * Note: We don't support chained scatterlists ++ */ ++ WARN_ON(PAGE_SIZE / sizeof(struct scatterlist) < nr_frags + 1); ++ scl = kcalloc(nr_frags + 1, sizeof(struct scatterlist), GFP_ATOMIC); ++ if (unlikely(!scl)) ++ return -ENOMEM; ++ ++ sg_init_table(scl, nr_frags + 1); ++ num_sg = skb_to_sgvec(skb, scl, 0, skb->len); ++ num_dma_bufs = dma_map_sg(dev, scl, num_sg, DMA_TO_DEVICE); ++ if (unlikely(!num_dma_bufs)) { ++ netdev_err(priv->net_dev, "dma_map_sg() error\n"); ++ err = -ENOMEM; ++ goto dma_map_sg_failed; ++ } ++ ++ /* Prepare the HW SGT structure */ ++ sgt_buf_size = priv->tx_data_offset + ++ sizeof(struct dpaa2_sg_entry) * (1 + num_dma_bufs); ++ sgt_buf = kzalloc(sgt_buf_size + DPAA2_ETH_TX_BUF_ALIGN, GFP_ATOMIC); ++ if (unlikely(!sgt_buf)) { ++ netdev_err(priv->net_dev, "failed to allocate SGT buffer\n"); ++ err = -ENOMEM; ++ goto sgt_buf_alloc_failed; ++ } ++ sgt_buf = PTR_ALIGN(sgt_buf, DPAA2_ETH_TX_BUF_ALIGN); ++ ++ /* PTA from egress side is passed as is to the confirmation side so ++ * we need to clear some fields here in order to find consistent values ++ * on TX confirmation. We are clearing FAS (Frame Annotation Status) ++ * field here. ++ */ ++ memset(sgt_buf + priv->buf_layout.private_data_size, 0, 8); ++ ++ sgt = (struct dpaa2_sg_entry *)(sgt_buf + priv->tx_data_offset); ++ ++ /* Fill in the HW SGT structure. ++ * ++ * sgt_buf is zeroed out, so the following fields are implicit ++ * in all sgt entries: ++ * - offset is 0 ++ * - format is 'dpaa2_sg_single' ++ */ ++ for_each_sg(scl, crt_scl, num_dma_bufs, i) { ++ dpaa2_sg_set_addr(&sgt[i], sg_dma_address(crt_scl)); ++ dpaa2_sg_set_len(&sgt[i], sg_dma_len(crt_scl)); ++ } ++ dpaa2_sg_set_final(&sgt[i - 1], true); ++ ++ /* Store the skb backpointer in the SGT buffer. ++ * Fit the scatterlist and the number of buffers alongside the ++ * skb backpointer in the SWA. We'll need all of them on Tx Conf. ++ */ ++ bps = (struct dpaa2_eth_swa *)sgt_buf; ++ bps->skb = skb; ++ bps->scl = scl; ++ bps->num_sg = num_sg; ++ bps->num_dma_bufs = num_dma_bufs; ++ ++ for (j = 0; j < i; j++) ++ dpaa2_sg_cpu_to_le(&sgt[j]); ++ ++ /* Separately map the SGT buffer */ ++ addr = dma_map_single(dev, sgt_buf, sgt_buf_size, DMA_TO_DEVICE); ++ if (unlikely(dma_mapping_error(dev, addr))) { ++ netdev_err(priv->net_dev, "dma_map_single() failed\n"); ++ err = -ENOMEM; ++ goto dma_map_single_failed; ++ } ++ dpaa2_fd_set_offset(fd, priv->tx_data_offset); ++ dpaa2_fd_set_format(fd, dpaa2_fd_sg); ++ dpaa2_fd_set_addr(fd, addr); ++ dpaa2_fd_set_len(fd, skb->len); ++ ++ fd->simple.ctrl = DPAA2_FD_CTRL_ASAL | DPAA2_FD_CTRL_PTA | ++ DPAA2_FD_CTRL_PTV1; ++ ++ return 0; ++ ++dma_map_single_failed: ++ kfree(sgt_buf); ++sgt_buf_alloc_failed: ++ dma_unmap_sg(dev, scl, num_sg, DMA_TO_DEVICE); ++dma_map_sg_failed: ++ kfree(scl); ++ return err; ++} ++ ++static int dpaa2_eth_build_single_fd(struct dpaa2_eth_priv *priv, ++ struct sk_buff *skb, ++ struct dpaa2_fd *fd) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ u8 *buffer_start; ++ struct sk_buff **skbh; ++ dma_addr_t addr; ++ ++ buffer_start = PTR_ALIGN(skb->data - priv->tx_data_offset - ++ DPAA2_ETH_TX_BUF_ALIGN, ++ DPAA2_ETH_TX_BUF_ALIGN); ++ ++ /* PTA from egress side is passed as is to the confirmation side so ++ * we need to clear some fields here in order to find consistent values ++ * on TX confirmation. We are clearing FAS (Frame Annotation Status) ++ * field here. ++ */ ++ memset(buffer_start + priv->buf_layout.private_data_size, 0, 8); ++ ++ /* Store a backpointer to the skb at the beginning of the buffer ++ * (in the private data area) such that we can release it ++ * on Tx confirm ++ */ ++ skbh = (struct sk_buff **)buffer_start; ++ *skbh = skb; ++ ++ addr = dma_map_single(dev, ++ buffer_start, ++ skb_tail_pointer(skb) - buffer_start, ++ DMA_TO_DEVICE); ++ if (unlikely(dma_mapping_error(dev, addr))) { ++ dev_err(dev, "dma_map_single() failed\n"); ++ return -EINVAL; ++ } ++ ++ dpaa2_fd_set_addr(fd, addr); ++ dpaa2_fd_set_offset(fd, (u16)(skb->data - buffer_start)); ++ dpaa2_fd_set_len(fd, skb->len); ++ dpaa2_fd_set_format(fd, dpaa2_fd_single); ++ ++ fd->simple.ctrl = DPAA2_FD_CTRL_ASAL | DPAA2_FD_CTRL_PTA | ++ DPAA2_FD_CTRL_PTV1; ++ ++ return 0; ++} ++ ++/* DMA-unmap and free FD and possibly SGT buffer allocated on Tx. The skb ++ * back-pointed to is also freed. ++ * This can be called either from dpaa2_eth_tx_conf() or on the error path of ++ * dpaa2_eth_tx(). ++ * Optionally, return the frame annotation status word (FAS), which needs ++ * to be checked if we're on the confirmation path. ++ */ ++static void dpaa2_eth_free_fd(const struct dpaa2_eth_priv *priv, ++ const struct dpaa2_fd *fd, ++ u32 *status) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ dma_addr_t fd_addr; ++ struct sk_buff **skbh, *skb; ++ unsigned char *buffer_start; ++ int unmap_size; ++ struct scatterlist *scl; ++ int num_sg, num_dma_bufs; ++ struct dpaa2_eth_swa *bps; ++ bool fd_single; ++ struct dpaa2_fas *fas; ++ ++ fd_addr = dpaa2_fd_get_addr(fd); ++ skbh = phys_to_virt(fd_addr); ++ fd_single = (dpaa2_fd_get_format(fd) == dpaa2_fd_single); ++ ++ if (fd_single) { ++ skb = *skbh; ++ buffer_start = (unsigned char *)skbh; ++ /* Accessing the skb buffer is safe before dma unmap, because ++ * we didn't map the actual skb shell. ++ */ ++ dma_unmap_single(dev, fd_addr, ++ skb_tail_pointer(skb) - buffer_start, ++ DMA_TO_DEVICE); ++ } else { ++ bps = (struct dpaa2_eth_swa *)skbh; ++ skb = bps->skb; ++ scl = bps->scl; ++ num_sg = bps->num_sg; ++ num_dma_bufs = bps->num_dma_bufs; ++ ++ /* Unmap the scatterlist */ ++ dma_unmap_sg(dev, scl, num_sg, DMA_TO_DEVICE); ++ kfree(scl); ++ ++ /* Unmap the SGT buffer */ ++ unmap_size = priv->tx_data_offset + ++ sizeof(struct dpaa2_sg_entry) * (1 + num_dma_bufs); ++ dma_unmap_single(dev, fd_addr, unmap_size, DMA_TO_DEVICE); ++ } ++ ++ if (priv->ts_tx_en && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { ++ struct skb_shared_hwtstamps shhwtstamps; ++ u64 *ns; ++ ++ memset(&shhwtstamps, 0, sizeof(shhwtstamps)); ++ ++ ns = (u64 *)((void *)skbh + ++ priv->buf_layout.private_data_size + ++ sizeof(struct dpaa2_fas)); ++ *ns = DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS * (*ns); ++ shhwtstamps.hwtstamp = ns_to_ktime(*ns); ++ skb_tstamp_tx(skb, &shhwtstamps); ++ } ++ ++ /* Check the status from the Frame Annotation after we unmap the first ++ * buffer but before we free it. ++ */ ++ if (status && (fd->simple.frc & DPAA2_FD_FRC_FASV)) { ++ fas = (struct dpaa2_fas *) ++ ((void *)skbh + priv->buf_layout.private_data_size); ++ *status = le32_to_cpu(fas->status); ++ } ++ ++ /* Free SGT buffer kmalloc'ed on tx */ ++ if (!fd_single) ++ kfree(skbh); ++ ++ /* Move on with skb release */ ++ dev_kfree_skb(skb); ++} ++ ++static int dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ struct dpaa2_fd fd; ++ struct rtnl_link_stats64 *percpu_stats; ++ struct dpaa2_eth_stats *percpu_extras; ++ int err, i; ++ /* TxConf FQ selection primarily based on cpu affinity; this is ++ * non-migratable context, so it's safe to call smp_processor_id(). ++ */ ++ u16 queue_mapping = smp_processor_id() % priv->dpni_attrs.max_senders; ++ ++ percpu_stats = this_cpu_ptr(priv->percpu_stats); ++ percpu_extras = this_cpu_ptr(priv->percpu_extras); ++ ++ /* Setup the FD fields */ ++ memset(&fd, 0, sizeof(fd)); ++ ++ if (unlikely(skb_headroom(skb) < DPAA2_ETH_NEEDED_HEADROOM(priv))) { ++ struct sk_buff *ns; ++ ++ dev_info_once(net_dev->dev.parent, ++ "skb headroom too small, must realloc.\n"); ++ ns = skb_realloc_headroom(skb, DPAA2_ETH_NEEDED_HEADROOM(priv)); ++ if (unlikely(!ns)) { ++ percpu_stats->tx_dropped++; ++ goto err_alloc_headroom; ++ } ++ dev_kfree_skb(skb); ++ skb = ns; ++ } ++ ++ /* We'll be holding a back-reference to the skb until Tx Confirmation; ++ * we don't want that overwritten by a concurrent Tx with a cloned skb. ++ */ ++ skb = skb_unshare(skb, GFP_ATOMIC); ++ if (unlikely(!skb)) { ++ netdev_err(net_dev, "Out of memory for skb_unshare()"); ++ /* skb_unshare() has already freed the skb */ ++ percpu_stats->tx_dropped++; ++ return NETDEV_TX_OK; ++ } ++ ++ if (skb_is_nonlinear(skb)) { ++ err = dpaa2_eth_build_sg_fd(priv, skb, &fd); ++ percpu_extras->tx_sg_frames++; ++ percpu_extras->tx_sg_bytes += skb->len; ++ } else { ++ err = dpaa2_eth_build_single_fd(priv, skb, &fd); ++ } ++ ++ if (unlikely(err)) { ++ percpu_stats->tx_dropped++; ++ goto err_build_fd; ++ } ++ ++ /* Tracing point */ ++ trace_dpaa2_tx_fd(net_dev, &fd); ++ ++ for (i = 0; i < (DPAA2_ETH_MAX_TX_QUEUES << 1); i++) { ++ err = dpaa2_io_service_enqueue_qd(NULL, priv->tx_qdid, 0, ++ priv->fq[queue_mapping].flowid, ++ &fd); ++ if (err != -EBUSY) ++ break; ++ } ++ percpu_extras->tx_portal_busy += i; ++ if (unlikely(err < 0)) { ++ netdev_dbg(net_dev, "error enqueueing Tx frame\n"); ++ percpu_stats->tx_errors++; ++ /* Clean up everything, including freeing the skb */ ++ dpaa2_eth_free_fd(priv, &fd, NULL); ++ } else { ++ percpu_stats->tx_packets++; ++ percpu_stats->tx_bytes += skb->len; ++ } ++ ++ return NETDEV_TX_OK; ++ ++err_build_fd: ++err_alloc_headroom: ++ dev_kfree_skb(skb); ++ ++ return NETDEV_TX_OK; ++} ++ ++static void dpaa2_eth_tx_conf(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ const struct dpaa2_fd *fd, ++ struct napi_struct *napi __always_unused) ++{ ++ struct rtnl_link_stats64 *percpu_stats; ++ struct dpaa2_eth_stats *percpu_extras; ++ u32 status = 0; ++ ++ /* Tracing point */ ++ trace_dpaa2_tx_conf_fd(priv->net_dev, fd); ++ ++ percpu_extras = this_cpu_ptr(priv->percpu_extras); ++ percpu_extras->tx_conf_frames++; ++ percpu_extras->tx_conf_bytes += dpaa2_fd_get_len(fd); ++ ++ dpaa2_eth_free_fd(priv, fd, &status); ++ ++ if (unlikely(status & DPAA2_ETH_TXCONF_ERR_MASK)) { ++ netdev_err(priv->net_dev, "TxConf frame error(s): 0x%08x\n", ++ status & DPAA2_ETH_TXCONF_ERR_MASK); ++ percpu_stats = this_cpu_ptr(priv->percpu_stats); ++ /* Tx-conf logically pertains to the egress path. */ ++ percpu_stats->tx_errors++; ++ } ++} ++ ++static int dpaa2_eth_set_rx_csum(struct dpaa2_eth_priv *priv, bool enable) ++{ ++ int err; ++ ++ err = dpni_set_l3_chksum_validation(priv->mc_io, 0, priv->mc_token, ++ enable); ++ if (err) { ++ netdev_err(priv->net_dev, ++ "dpni_set_l3_chksum_validation() failed\n"); ++ return err; ++ } ++ ++ err = dpni_set_l4_chksum_validation(priv->mc_io, 0, priv->mc_token, ++ enable); ++ if (err) { ++ netdev_err(priv->net_dev, ++ "dpni_set_l4_chksum_validation failed\n"); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static int dpaa2_eth_set_tx_csum(struct dpaa2_eth_priv *priv, bool enable) ++{ ++ struct dpaa2_eth_fq *fq; ++ struct dpni_tx_flow_cfg tx_flow_cfg; ++ int err; ++ int i; ++ ++ memset(&tx_flow_cfg, 0, sizeof(tx_flow_cfg)); ++ tx_flow_cfg.options = DPNI_TX_FLOW_OPT_L3_CHKSUM_GEN | ++ DPNI_TX_FLOW_OPT_L4_CHKSUM_GEN; ++ tx_flow_cfg.l3_chksum_gen = enable; ++ tx_flow_cfg.l4_chksum_gen = enable; ++ ++ for (i = 0; i < priv->num_fqs; i++) { ++ fq = &priv->fq[i]; ++ if (fq->type != DPAA2_TX_CONF_FQ) ++ continue; ++ ++ /* The Tx flowid is kept in the corresponding TxConf FQ. */ ++ err = dpni_set_tx_flow(priv->mc_io, 0, priv->mc_token, ++ &fq->flowid, &tx_flow_cfg); ++ if (err) { ++ netdev_err(priv->net_dev, "dpni_set_tx_flow failed\n"); ++ return err; ++ } ++ } ++ ++ return 0; ++} ++ ++static int dpaa2_bp_add_7(struct dpaa2_eth_priv *priv, u16 bpid) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ u64 buf_array[7]; ++ void *buf; ++ dma_addr_t addr; ++ int i; ++ ++ for (i = 0; i < 7; i++) { ++ /* Allocate buffer visible to WRIOP + skb shared info + ++ * alignment padding ++ */ ++ buf = napi_alloc_frag(DPAA2_ETH_BUF_RAW_SIZE); ++ if (unlikely(!buf)) { ++ dev_err(dev, "buffer allocation failed\n"); ++ goto err_alloc; ++ } ++ buf = PTR_ALIGN(buf, DPAA2_ETH_RX_BUF_ALIGN); ++ ++ addr = dma_map_single(dev, buf, DPAA2_ETH_RX_BUFFER_SIZE, ++ DMA_FROM_DEVICE); ++ if (unlikely(dma_mapping_error(dev, addr))) { ++ dev_err(dev, "dma_map_single() failed\n"); ++ goto err_map; ++ } ++ buf_array[i] = addr; ++ ++ /* tracing point */ ++ trace_dpaa2_eth_buf_seed(priv->net_dev, ++ buf, DPAA2_ETH_BUF_RAW_SIZE, ++ addr, DPAA2_ETH_RX_BUFFER_SIZE, ++ bpid); ++ } ++ ++release_bufs: ++ /* In case the portal is busy, retry until successful. ++ * The buffer release function would only fail if the QBMan portal ++ * was busy, which implies portal contention (i.e. more CPUs than ++ * portals, i.e. GPPs w/o affine DPIOs). For all practical purposes, ++ * there is little we can realistically do, short of giving up - ++ * in which case we'd risk depleting the buffer pool and never again ++ * receiving the Rx interrupt which would kick-start the refill logic. ++ * So just keep retrying, at the risk of being moved to ksoftirqd. ++ */ ++ while (dpaa2_io_service_release(NULL, bpid, buf_array, i)) ++ cpu_relax(); ++ return i; ++ ++err_map: ++ put_page(virt_to_head_page(buf)); ++err_alloc: ++ if (i) ++ goto release_bufs; ++ ++ return 0; ++} ++ ++static int dpaa2_dpbp_seed(struct dpaa2_eth_priv *priv, u16 bpid) ++{ ++ int i, j; ++ int new_count; ++ ++ /* This is the lazy seeding of Rx buffer pools. ++ * dpaa2_bp_add_7() is also used on the Rx hotpath and calls ++ * napi_alloc_frag(). The trouble with that is that it in turn ends up ++ * calling this_cpu_ptr(), which mandates execution in atomic context. ++ * Rather than splitting up the code, do a one-off preempt disable. ++ */ ++ preempt_disable(); ++ for (j = 0; j < priv->num_channels; j++) { ++ for (i = 0; i < DPAA2_ETH_NUM_BUFS; i += 7) { ++ new_count = dpaa2_bp_add_7(priv, bpid); ++ priv->channel[j]->buf_count += new_count; ++ ++ if (new_count < 7) { ++ preempt_enable(); ++ goto out_of_memory; ++ } ++ } ++ } ++ preempt_enable(); ++ ++ return 0; ++ ++out_of_memory: ++ return -ENOMEM; ++} ++ ++/** ++ * Drain the specified number of buffers from the DPNI's private buffer pool. ++ * @count must not exceeed 7 ++ */ ++static void dpaa2_dpbp_drain_cnt(struct dpaa2_eth_priv *priv, int count) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ u64 buf_array[7]; ++ void *vaddr; ++ int ret, i; ++ ++ do { ++ ret = dpaa2_io_service_acquire(NULL, priv->dpbp_attrs.bpid, ++ buf_array, count); ++ if (ret < 0) { ++ pr_err("dpaa2_io_service_acquire() failed\n"); ++ return; ++ } ++ for (i = 0; i < ret; i++) { ++ /* Same logic as on regular Rx path */ ++ dma_unmap_single(dev, buf_array[i], ++ DPAA2_ETH_RX_BUFFER_SIZE, ++ DMA_FROM_DEVICE); ++ vaddr = phys_to_virt(buf_array[i]); ++ put_page(virt_to_head_page(vaddr)); ++ } ++ } while (ret); ++} ++ ++static void __dpaa2_dpbp_free(struct dpaa2_eth_priv *priv) ++{ ++ int i; ++ ++ dpaa2_dpbp_drain_cnt(priv, 7); ++ dpaa2_dpbp_drain_cnt(priv, 1); ++ ++ for (i = 0; i < priv->num_channels; i++) ++ priv->channel[i]->buf_count = 0; ++} ++ ++/* Function is called from softirq context only, so we don't need to guard ++ * the access to percpu count ++ */ ++static int dpaa2_dpbp_refill(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ u16 bpid) ++{ ++ int new_count; ++ int err = 0; ++ ++ if (unlikely(ch->buf_count < DPAA2_ETH_REFILL_THRESH)) { ++ do { ++ new_count = dpaa2_bp_add_7(priv, bpid); ++ if (unlikely(!new_count)) { ++ /* Out of memory; abort for now, we'll ++ * try later on ++ */ ++ break; ++ } ++ ch->buf_count += new_count; ++ } while (ch->buf_count < DPAA2_ETH_NUM_BUFS); ++ ++ if (unlikely(ch->buf_count < DPAA2_ETH_NUM_BUFS)) ++ err = -ENOMEM; ++ } ++ ++ return err; ++} ++ ++static int __dpaa2_eth_pull_channel(struct dpaa2_eth_channel *ch) ++{ ++ int err; ++ int dequeues = -1; ++ struct dpaa2_eth_priv *priv = ch->priv; ++ ++ /* Retry while portal is busy */ ++ do { ++ err = dpaa2_io_service_pull_channel(NULL, ch->ch_id, ch->store); ++ dequeues++; ++ } while (err == -EBUSY); ++ if (unlikely(err)) ++ netdev_err(priv->net_dev, "dpaa2_io_service_pull err %d", err); ++ ++ ch->stats.dequeue_portal_busy += dequeues; ++ return err; ++} ++ ++static int dpaa2_eth_poll(struct napi_struct *napi, int budget) ++{ ++ struct dpaa2_eth_channel *ch; ++ int cleaned = 0, store_cleaned; ++ struct dpaa2_eth_priv *priv; ++ int err; ++ ++ ch = container_of(napi, struct dpaa2_eth_channel, napi); ++ priv = ch->priv; ++ ++ __dpaa2_eth_pull_channel(ch); ++ ++ do { ++ /* Refill pool if appropriate */ ++ dpaa2_dpbp_refill(priv, ch, priv->dpbp_attrs.bpid); ++ ++ store_cleaned = dpaa2_eth_store_consume(ch); ++ cleaned += store_cleaned; ++ ++ if (store_cleaned == 0 || ++ cleaned > budget - DPAA2_ETH_STORE_SIZE) ++ break; ++ ++ /* Try to dequeue some more */ ++ err = __dpaa2_eth_pull_channel(ch); ++ if (unlikely(err)) ++ break; ++ } while (1); ++ ++ if (cleaned < budget) { ++ napi_complete_done(napi, cleaned); ++ err = dpaa2_io_service_rearm(NULL, &ch->nctx); ++ if (unlikely(err)) ++ netdev_err(priv->net_dev, ++ "Notif rearm failed for channel %d\n", ++ ch->ch_id); ++ } ++ ++ ch->stats.frames += cleaned; ++ ++ return cleaned; ++} ++ ++static void dpaa2_eth_napi_enable(struct dpaa2_eth_priv *priv) ++{ ++ struct dpaa2_eth_channel *ch; ++ int i; ++ ++ for (i = 0; i < priv->num_channels; i++) { ++ ch = priv->channel[i]; ++ napi_enable(&ch->napi); ++ } ++} ++ ++static void dpaa2_eth_napi_disable(struct dpaa2_eth_priv *priv) ++{ ++ struct dpaa2_eth_channel *ch; ++ int i; ++ ++ for (i = 0; i < priv->num_channels; i++) { ++ ch = priv->channel[i]; ++ napi_disable(&ch->napi); ++ } ++} ++ ++static int dpaa2_link_state_update(struct dpaa2_eth_priv *priv) ++{ ++ struct dpni_link_state state; ++ int err; ++ ++ err = dpni_get_link_state(priv->mc_io, 0, priv->mc_token, &state); ++ if (unlikely(err)) { ++ netdev_err(priv->net_dev, ++ "dpni_get_link_state() failed\n"); ++ return err; ++ } ++ ++ /* Chech link state; speed / duplex changes are not treated yet */ ++ if (priv->link_state.up == state.up) ++ return 0; ++ ++ priv->link_state = state; ++ if (state.up) { ++ netif_carrier_on(priv->net_dev); ++ netif_tx_start_all_queues(priv->net_dev); ++ } else { ++ netif_tx_stop_all_queues(priv->net_dev); ++ netif_carrier_off(priv->net_dev); ++ } ++ ++ netdev_info(priv->net_dev, "Link Event: state %s", ++ state.up ? "up" : "down"); ++ ++ return 0; ++} ++ ++static int dpaa2_eth_open(struct net_device *net_dev) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ int err; ++ ++ err = dpaa2_dpbp_seed(priv, priv->dpbp_attrs.bpid); ++ if (err) { ++ /* Not much to do; the buffer pool, though not filled up, ++ * may still contain some buffers which would enable us ++ * to limp on. ++ */ ++ netdev_err(net_dev, "Buffer seeding failed for DPBP %d (bpid=%d)\n", ++ priv->dpbp_dev->obj_desc.id, priv->dpbp_attrs.bpid); ++ } ++ ++ /* We'll only start the txqs when the link is actually ready; make sure ++ * we don't race against the link up notification, which may come ++ * immediately after dpni_enable(); ++ */ ++ netif_tx_stop_all_queues(net_dev); ++ dpaa2_eth_napi_enable(priv); ++ /* Also, explicitly set carrier off, otherwise netif_carrier_ok() will ++ * return true and cause 'ip link show' to report the LOWER_UP flag, ++ * even though the link notification wasn't even received. ++ */ ++ netif_carrier_off(net_dev); ++ ++ err = dpni_enable(priv->mc_io, 0, priv->mc_token); ++ if (err < 0) { ++ dev_err(net_dev->dev.parent, "dpni_enable() failed\n"); ++ goto enable_err; ++ } ++ ++ /* If the DPMAC object has already processed the link up interrupt, ++ * we have to learn the link state ourselves. ++ */ ++ err = dpaa2_link_state_update(priv); ++ if (err < 0) { ++ dev_err(net_dev->dev.parent, "Can't update link state\n"); ++ goto link_state_err; ++ } ++ ++ return 0; ++ ++link_state_err: ++enable_err: ++ dpaa2_eth_napi_disable(priv); ++ __dpaa2_dpbp_free(priv); ++ return err; ++} ++ ++static int dpaa2_eth_stop(struct net_device *net_dev) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ ++ /* Stop Tx and Rx traffic */ ++ netif_tx_stop_all_queues(net_dev); ++ netif_carrier_off(net_dev); ++ dpni_disable(priv->mc_io, 0, priv->mc_token); ++ ++ msleep(500); ++ ++ dpaa2_eth_napi_disable(priv); ++ msleep(100); ++ ++ __dpaa2_dpbp_free(priv); ++ ++ return 0; ++} ++ ++static int dpaa2_eth_init(struct net_device *net_dev) ++{ ++ u64 supported = 0; ++ u64 not_supported = 0; ++ const struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ u32 options = priv->dpni_attrs.options; ++ ++ /* Capabilities listing */ ++ supported |= IFF_LIVE_ADDR_CHANGE | IFF_PROMISC | IFF_ALLMULTI; ++ ++ if (options & DPNI_OPT_UNICAST_FILTER) ++ supported |= IFF_UNICAST_FLT; ++ else ++ not_supported |= IFF_UNICAST_FLT; ++ ++ if (options & DPNI_OPT_MULTICAST_FILTER) ++ supported |= IFF_MULTICAST; ++ else ++ not_supported |= IFF_MULTICAST; ++ ++ net_dev->priv_flags |= supported; ++ net_dev->priv_flags &= ~not_supported; ++ ++ /* Features */ ++ net_dev->features = NETIF_F_RXCSUM | ++ NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | ++ NETIF_F_SG | NETIF_F_HIGHDMA | ++ NETIF_F_LLTX; ++ net_dev->hw_features = net_dev->features; ++ ++ return 0; ++} ++ ++static int dpaa2_eth_set_addr(struct net_device *net_dev, void *addr) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ struct device *dev = net_dev->dev.parent; ++ int err; ++ ++ err = eth_mac_addr(net_dev, addr); ++ if (err < 0) { ++ dev_err(dev, "eth_mac_addr() failed with error %d\n", err); ++ return err; ++ } ++ ++ err = dpni_set_primary_mac_addr(priv->mc_io, 0, priv->mc_token, ++ net_dev->dev_addr); ++ if (err) { ++ dev_err(dev, "dpni_set_primary_mac_addr() failed (%d)\n", err); ++ return err; ++ } ++ ++ return 0; ++} ++ ++/** Fill in counters maintained by the GPP driver. These may be different from ++ * the hardware counters obtained by ethtool. ++ */ ++static struct rtnl_link_stats64 ++*dpaa2_eth_get_stats(struct net_device *net_dev, ++ struct rtnl_link_stats64 *stats) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ struct rtnl_link_stats64 *percpu_stats; ++ u64 *cpustats; ++ u64 *netstats = (u64 *)stats; ++ int i, j; ++ int num = sizeof(struct rtnl_link_stats64) / sizeof(u64); ++ ++ for_each_possible_cpu(i) { ++ percpu_stats = per_cpu_ptr(priv->percpu_stats, i); ++ cpustats = (u64 *)percpu_stats; ++ for (j = 0; j < num; j++) ++ netstats[j] += cpustats[j]; ++ } ++ ++ return stats; ++} ++ ++static int dpaa2_eth_change_mtu(struct net_device *net_dev, int mtu) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ int err; ++ ++ if (mtu < 68 || mtu > DPAA2_ETH_MAX_MTU) { ++ netdev_err(net_dev, "Invalid MTU %d. Valid range is: 68..%d\n", ++ mtu, DPAA2_ETH_MAX_MTU); ++ return -EINVAL; ++ } ++ ++ /* Set the maximum Rx frame length to match the transmit side; ++ * account for L2 headers when computing the MFL ++ */ ++ err = dpni_set_max_frame_length(priv->mc_io, 0, priv->mc_token, ++ (u16)DPAA2_ETH_L2_MAX_FRM(mtu)); ++ if (err) { ++ netdev_err(net_dev, "dpni_set_mfl() failed\n"); ++ return err; ++ } ++ ++ net_dev->mtu = mtu; ++ return 0; ++} ++ ++/* Convenience macro to make code littered with error checking more readable */ ++#define DPAA2_ETH_WARN_IF_ERR(err, netdevp, format, ...) \ ++do { \ ++ if (err) \ ++ netdev_warn(netdevp, format, ##__VA_ARGS__); \ ++} while (0) ++ ++/* Copy mac unicast addresses from @net_dev to @priv. ++ * Its sole purpose is to make dpaa2_eth_set_rx_mode() more readable. ++ */ ++static void _dpaa2_eth_hw_add_uc_addr(const struct net_device *net_dev, ++ struct dpaa2_eth_priv *priv) ++{ ++ struct netdev_hw_addr *ha; ++ int err; ++ ++ netdev_for_each_uc_addr(ha, net_dev) { ++ err = dpni_add_mac_addr(priv->mc_io, 0, priv->mc_token, ++ ha->addr); ++ DPAA2_ETH_WARN_IF_ERR(err, priv->net_dev, ++ "Could not add ucast MAC %pM to the filtering table (err %d)\n", ++ ha->addr, err); ++ } ++} ++ ++/* Copy mac multicast addresses from @net_dev to @priv ++ * Its sole purpose is to make dpaa2_eth_set_rx_mode() more readable. ++ */ ++static void _dpaa2_eth_hw_add_mc_addr(const struct net_device *net_dev, ++ struct dpaa2_eth_priv *priv) ++{ ++ struct netdev_hw_addr *ha; ++ int err; ++ ++ netdev_for_each_mc_addr(ha, net_dev) { ++ err = dpni_add_mac_addr(priv->mc_io, 0, priv->mc_token, ++ ha->addr); ++ DPAA2_ETH_WARN_IF_ERR(err, priv->net_dev, ++ "Could not add mcast MAC %pM to the filtering table (err %d)\n", ++ ha->addr, err); ++ } ++} ++ ++static void dpaa2_eth_set_rx_mode(struct net_device *net_dev) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ int uc_count = netdev_uc_count(net_dev); ++ int mc_count = netdev_mc_count(net_dev); ++ u8 max_uc = priv->dpni_attrs.max_unicast_filters; ++ u8 max_mc = priv->dpni_attrs.max_multicast_filters; ++ u32 options = priv->dpni_attrs.options; ++ u16 mc_token = priv->mc_token; ++ struct fsl_mc_io *mc_io = priv->mc_io; ++ int err; ++ ++ /* Basic sanity checks; these probably indicate a misconfiguration */ ++ if (!(options & DPNI_OPT_UNICAST_FILTER) && max_uc != 0) ++ netdev_info(net_dev, ++ "max_unicast_filters=%d, you must have DPNI_OPT_UNICAST_FILTER in the DPL\n", ++ max_uc); ++ if (!(options & DPNI_OPT_MULTICAST_FILTER) && max_mc != 0) ++ netdev_info(net_dev, ++ "max_multicast_filters=%d, you must have DPNI_OPT_MULTICAST_FILTER in the DPL\n", ++ max_mc); ++ ++ /* Force promiscuous if the uc or mc counts exceed our capabilities. */ ++ if (uc_count > max_uc) { ++ netdev_info(net_dev, ++ "Unicast addr count reached %d, max allowed is %d; forcing promisc\n", ++ uc_count, max_uc); ++ goto force_promisc; ++ } ++ if (mc_count > max_mc) { ++ netdev_info(net_dev, ++ "Multicast addr count reached %d, max allowed is %d; forcing promisc\n", ++ mc_count, max_mc); ++ goto force_mc_promisc; ++ } ++ ++ /* Adjust promisc settings due to flag combinations */ ++ if (net_dev->flags & IFF_PROMISC) { ++ goto force_promisc; ++ } else if (net_dev->flags & IFF_ALLMULTI) { ++ /* First, rebuild unicast filtering table. This should be done ++ * in promisc mode, in order to avoid frame loss while we ++ * progressively add entries to the table. ++ * We don't know whether we had been in promisc already, and ++ * making an MC call to find it is expensive; so set uc promisc ++ * nonetheless. ++ */ ++ err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 1); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set uc promisc\n"); ++ ++ /* Actual uc table reconstruction. */ ++ err = dpni_clear_mac_filters(mc_io, 0, mc_token, 1, 0); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear uc filters\n"); ++ _dpaa2_eth_hw_add_uc_addr(net_dev, priv); ++ ++ /* Finally, clear uc promisc and set mc promisc as requested. */ ++ err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 0); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear uc promisc\n"); ++ goto force_mc_promisc; ++ } ++ ++ /* Neither unicast, nor multicast promisc will be on... eventually. ++ * For now, rebuild mac filtering tables while forcing both of them on. ++ */ ++ err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 1); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set uc promisc (%d)\n", err); ++ err = dpni_set_multicast_promisc(mc_io, 0, mc_token, 1); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set mc promisc (%d)\n", err); ++ ++ /* Actual mac filtering tables reconstruction */ ++ err = dpni_clear_mac_filters(mc_io, 0, mc_token, 1, 1); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear mac filters\n"); ++ _dpaa2_eth_hw_add_mc_addr(net_dev, priv); ++ _dpaa2_eth_hw_add_uc_addr(net_dev, priv); ++ ++ /* Now we can clear both ucast and mcast promisc, without risking ++ * to drop legitimate frames anymore. ++ */ ++ err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 0); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear ucast promisc\n"); ++ err = dpni_set_multicast_promisc(mc_io, 0, mc_token, 0); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear mcast promisc\n"); ++ ++ return; ++ ++force_promisc: ++ err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 1); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set ucast promisc\n"); ++force_mc_promisc: ++ err = dpni_set_multicast_promisc(mc_io, 0, mc_token, 1); ++ DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set mcast promisc\n"); ++} ++ ++static int dpaa2_eth_set_features(struct net_device *net_dev, ++ netdev_features_t features) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ netdev_features_t changed = features ^ net_dev->features; ++ int err; ++ ++ if (changed & NETIF_F_RXCSUM) { ++ bool enable = !!(features & NETIF_F_RXCSUM); ++ ++ err = dpaa2_eth_set_rx_csum(priv, enable); ++ if (err) ++ return err; ++ } ++ ++ if (changed & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)) { ++ bool enable = !!(features & ++ (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)); ++ err = dpaa2_eth_set_tx_csum(priv, enable); ++ if (err) ++ return err; ++ } ++ ++ return 0; ++} ++ ++static int dpaa2_eth_ts_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(dev); ++ struct hwtstamp_config config; ++ ++ if (copy_from_user(&config, rq->ifr_data, sizeof(config))) ++ return -EFAULT; ++ ++ switch (config.tx_type) { ++ case HWTSTAMP_TX_OFF: ++ priv->ts_tx_en = false; ++ break; ++ case HWTSTAMP_TX_ON: ++ priv->ts_tx_en = true; ++ break; ++ default: ++ return -ERANGE; ++ } ++ ++ if (config.rx_filter == HWTSTAMP_FILTER_NONE) ++ priv->ts_rx_en = false; ++ else { ++ priv->ts_rx_en = true; ++ /* TS is set for all frame types, not only those requested */ ++ config.rx_filter = HWTSTAMP_FILTER_ALL; ++ } ++ ++ return copy_to_user(rq->ifr_data, &config, sizeof(config)) ? ++ -EFAULT : 0; ++} ++ ++static int dpaa2_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ if (cmd == SIOCSHWTSTAMP) ++ return dpaa2_eth_ts_ioctl(dev, rq, cmd); ++ else ++ return -EINVAL; ++} ++ ++static const struct net_device_ops dpaa2_eth_ops = { ++ .ndo_open = dpaa2_eth_open, ++ .ndo_start_xmit = dpaa2_eth_tx, ++ .ndo_stop = dpaa2_eth_stop, ++ .ndo_init = dpaa2_eth_init, ++ .ndo_set_mac_address = dpaa2_eth_set_addr, ++ .ndo_get_stats64 = dpaa2_eth_get_stats, ++ .ndo_change_mtu = dpaa2_eth_change_mtu, ++ .ndo_set_rx_mode = dpaa2_eth_set_rx_mode, ++ .ndo_set_features = dpaa2_eth_set_features, ++ .ndo_do_ioctl = dpaa2_eth_ioctl, ++}; ++ ++static void dpaa2_eth_cdan_cb(struct dpaa2_io_notification_ctx *ctx) ++{ ++ struct dpaa2_eth_channel *ch; ++ ++ ch = container_of(ctx, struct dpaa2_eth_channel, nctx); ++ ++ /* Update NAPI statistics */ ++ ch->stats.cdan++; ++ ++ napi_schedule_irqoff(&ch->napi); ++} ++ ++static void dpaa2_eth_setup_fqs(struct dpaa2_eth_priv *priv) ++{ ++ int i; ++ ++ /* We have one TxConf FQ per Tx flow */ ++ for (i = 0; i < priv->dpni_attrs.max_senders; i++) { ++ priv->fq[priv->num_fqs].netdev_priv = priv; ++ priv->fq[priv->num_fqs].type = DPAA2_TX_CONF_FQ; ++ priv->fq[priv->num_fqs].consume = dpaa2_eth_tx_conf; ++ priv->fq[priv->num_fqs++].flowid = DPNI_NEW_FLOW_ID; ++ } ++ ++ /* The number of Rx queues (Rx distribution width) may be different from ++ * the number of cores. ++ * We only support one traffic class for now. ++ */ ++ for (i = 0; i < dpaa2_queue_count(priv); i++) { ++ priv->fq[priv->num_fqs].netdev_priv = priv; ++ priv->fq[priv->num_fqs].type = DPAA2_RX_FQ; ++ priv->fq[priv->num_fqs].consume = dpaa2_eth_rx; ++ priv->fq[priv->num_fqs++].flowid = (u16)i; ++ } ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE ++ /* We have exactly one Rx error queue per DPNI */ ++ priv->fq[priv->num_fqs].netdev_priv = priv; ++ priv->fq[priv->num_fqs].type = DPAA2_RX_ERR_FQ; ++ priv->fq[priv->num_fqs++].consume = dpaa2_eth_rx_err; ++#endif ++} ++ ++static int check_obj_version(struct fsl_mc_device *ls_dev, u16 mc_version) ++{ ++ char *name = ls_dev->obj_desc.type; ++ struct device *dev = &ls_dev->dev; ++ u16 supported_version, flib_version; ++ ++ if (strcmp(name, "dpni") == 0) { ++ flib_version = DPNI_VER_MAJOR; ++ supported_version = DPAA2_SUPPORTED_DPNI_VERSION; ++ } else if (strcmp(name, "dpbp") == 0) { ++ flib_version = DPBP_VER_MAJOR; ++ supported_version = DPAA2_SUPPORTED_DPBP_VERSION; ++ } else if (strcmp(name, "dpcon") == 0) { ++ flib_version = DPCON_VER_MAJOR; ++ supported_version = DPAA2_SUPPORTED_DPCON_VERSION; ++ } else { ++ dev_err(dev, "invalid object type (%s)\n", name); ++ return -EINVAL; ++ } ++ ++ /* Check that the FLIB-defined version matches the one reported by MC */ ++ if (mc_version != flib_version) { ++ dev_err(dev, ++ "%s FLIB version mismatch: MC reports %d, we have %d\n", ++ name, mc_version, flib_version); ++ return -EINVAL; ++ } ++ ++ /* ... and that we actually support it */ ++ if (mc_version < supported_version) { ++ dev_err(dev, "Unsupported %s FLIB version (%d)\n", ++ name, mc_version); ++ return -EINVAL; ++ } ++ dev_dbg(dev, "Using %s FLIB version %d\n", name, mc_version); ++ ++ return 0; ++} ++ ++static struct fsl_mc_device *dpaa2_dpcon_setup(struct dpaa2_eth_priv *priv) ++{ ++ struct fsl_mc_device *dpcon; ++ struct device *dev = priv->net_dev->dev.parent; ++ struct dpcon_attr attrs; ++ int err; ++ ++ err = fsl_mc_object_allocate(to_fsl_mc_device(dev), ++ FSL_MC_POOL_DPCON, &dpcon); ++ if (err) { ++ dev_info(dev, "Not enough DPCONs, will go on as-is\n"); ++ return NULL; ++ } ++ ++ err = dpcon_open(priv->mc_io, 0, dpcon->obj_desc.id, &dpcon->mc_handle); ++ if (err) { ++ dev_err(dev, "dpcon_open() failed\n"); ++ goto err_open; ++ } ++ ++ err = dpcon_get_attributes(priv->mc_io, 0, dpcon->mc_handle, &attrs); ++ if (err) { ++ dev_err(dev, "dpcon_get_attributes() failed\n"); ++ goto err_get_attr; ++ } ++ ++ err = check_obj_version(dpcon, attrs.version.major); ++ if (err) ++ goto err_dpcon_ver; ++ ++ err = dpcon_enable(priv->mc_io, 0, dpcon->mc_handle); ++ if (err) { ++ dev_err(dev, "dpcon_enable() failed\n"); ++ goto err_enable; ++ } ++ ++ return dpcon; ++ ++err_enable: ++err_dpcon_ver: ++err_get_attr: ++ dpcon_close(priv->mc_io, 0, dpcon->mc_handle); ++err_open: ++ fsl_mc_object_free(dpcon); ++ ++ return NULL; ++} ++ ++static void dpaa2_dpcon_free(struct dpaa2_eth_priv *priv, ++ struct fsl_mc_device *dpcon) ++{ ++ dpcon_disable(priv->mc_io, 0, dpcon->mc_handle); ++ dpcon_close(priv->mc_io, 0, dpcon->mc_handle); ++ fsl_mc_object_free(dpcon); ++} ++ ++static struct dpaa2_eth_channel * ++dpaa2_alloc_channel(struct dpaa2_eth_priv *priv) ++{ ++ struct dpaa2_eth_channel *channel; ++ struct dpcon_attr attr; ++ struct device *dev = priv->net_dev->dev.parent; ++ int err; ++ ++ channel = kzalloc(sizeof(*channel), GFP_ATOMIC); ++ if (!channel) { ++ dev_err(dev, "Memory allocation failed\n"); ++ return NULL; ++ } ++ ++ channel->dpcon = dpaa2_dpcon_setup(priv); ++ if (!channel->dpcon) ++ goto err_setup; ++ ++ err = dpcon_get_attributes(priv->mc_io, 0, channel->dpcon->mc_handle, ++ &attr); ++ if (err) { ++ dev_err(dev, "dpcon_get_attributes() failed\n"); ++ goto err_get_attr; ++ } ++ ++ channel->dpcon_id = attr.id; ++ channel->ch_id = attr.qbman_ch_id; ++ channel->priv = priv; ++ ++ return channel; ++ ++err_get_attr: ++ dpaa2_dpcon_free(priv, channel->dpcon); ++err_setup: ++ kfree(channel); ++ return NULL; ++} ++ ++static void dpaa2_free_channel(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *channel) ++{ ++ dpaa2_dpcon_free(priv, channel->dpcon); ++ kfree(channel); ++} ++ ++static int dpaa2_dpio_setup(struct dpaa2_eth_priv *priv) ++{ ++ struct dpaa2_io_notification_ctx *nctx; ++ struct dpaa2_eth_channel *channel; ++ struct dpcon_notification_cfg dpcon_notif_cfg; ++ struct device *dev = priv->net_dev->dev.parent; ++ int i, err; ++ ++ /* Don't allocate more channels than strictly necessary and assign ++ * them to cores starting from the first one available in ++ * cpu_online_mask. ++ * If the number of channels is lower than the number of cores, ++ * there will be no rx/tx conf processing on the last cores in the mask. ++ */ ++ cpumask_clear(&priv->dpio_cpumask); ++ for_each_online_cpu(i) { ++ /* Try to allocate a channel */ ++ channel = dpaa2_alloc_channel(priv); ++ if (!channel) ++ goto err_alloc_ch; ++ ++ priv->channel[priv->num_channels] = channel; ++ ++ nctx = &channel->nctx; ++ nctx->is_cdan = 1; ++ nctx->cb = dpaa2_eth_cdan_cb; ++ nctx->id = channel->ch_id; ++ nctx->desired_cpu = i; ++ ++ /* Register the new context */ ++ err = dpaa2_io_service_register(NULL, nctx); ++ if (err) { ++ dev_info(dev, "No affine DPIO for core %d\n", i); ++ /* This core doesn't have an affine DPIO, but there's ++ * a chance another one does, so keep trying ++ */ ++ dpaa2_free_channel(priv, channel); ++ continue; ++ } ++ ++ /* Register DPCON notification with MC */ ++ dpcon_notif_cfg.dpio_id = nctx->dpio_id; ++ dpcon_notif_cfg.priority = 0; ++ dpcon_notif_cfg.user_ctx = nctx->qman64; ++ err = dpcon_set_notification(priv->mc_io, 0, ++ channel->dpcon->mc_handle, ++ &dpcon_notif_cfg); ++ if (err) { ++ dev_err(dev, "dpcon_set_notification failed()\n"); ++ goto err_set_cdan; ++ } ++ ++ /* If we managed to allocate a channel and also found an affine ++ * DPIO for this core, add it to the final mask ++ */ ++ cpumask_set_cpu(i, &priv->dpio_cpumask); ++ priv->num_channels++; ++ ++ if (priv->num_channels == dpaa2_max_channels(priv)) ++ break; ++ } ++ ++ /* Tx confirmation queues can only be serviced by cpus ++ * with an affine DPIO/channel ++ */ ++ cpumask_copy(&priv->txconf_cpumask, &priv->dpio_cpumask); ++ ++ return 0; ++ ++err_set_cdan: ++ dpaa2_io_service_deregister(NULL, nctx); ++ dpaa2_free_channel(priv, channel); ++err_alloc_ch: ++ if (cpumask_empty(&priv->dpio_cpumask)) { ++ dev_err(dev, "No cpu with an affine DPIO/DPCON\n"); ++ return -ENODEV; ++ } ++ cpumask_copy(&priv->txconf_cpumask, &priv->dpio_cpumask); ++ ++ return 0; ++} ++ ++static void dpaa2_dpio_free(struct dpaa2_eth_priv *priv) ++{ ++ int i; ++ struct dpaa2_eth_channel *ch; ++ ++ /* deregister CDAN notifications and free channels */ ++ for (i = 0; i < priv->num_channels; i++) { ++ ch = priv->channel[i]; ++ dpaa2_io_service_deregister(NULL, &ch->nctx); ++ dpaa2_free_channel(priv, ch); ++ } ++} ++ ++static struct dpaa2_eth_channel * ++dpaa2_get_channel_by_cpu(struct dpaa2_eth_priv *priv, int cpu) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ int i; ++ ++ for (i = 0; i < priv->num_channels; i++) ++ if (priv->channel[i]->nctx.desired_cpu == cpu) ++ return priv->channel[i]; ++ ++ /* We should never get here. Issue a warning and return ++ * the first channel, because it's still better than nothing ++ */ ++ dev_warn(dev, "No affine channel found for cpu %d\n", cpu); ++ ++ return priv->channel[0]; ++} ++ ++static void dpaa2_set_fq_affinity(struct dpaa2_eth_priv *priv) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ struct dpaa2_eth_fq *fq; ++ int rx_cpu, txconf_cpu; ++ int i; ++ ++ /* For each FQ, pick one channel/CPU to deliver frames to. ++ * This may well change at runtime, either through irqbalance or ++ * through direct user intervention. ++ */ ++ rx_cpu = cpumask_first(&priv->dpio_cpumask); ++ txconf_cpu = cpumask_first(&priv->txconf_cpumask); ++ ++ for (i = 0; i < priv->num_fqs; i++) { ++ fq = &priv->fq[i]; ++ switch (fq->type) { ++ case DPAA2_RX_FQ: ++ case DPAA2_RX_ERR_FQ: ++ fq->target_cpu = rx_cpu; ++ cpumask_rr(rx_cpu, &priv->dpio_cpumask); ++ break; ++ case DPAA2_TX_CONF_FQ: ++ fq->target_cpu = txconf_cpu; ++ cpumask_rr(txconf_cpu, &priv->txconf_cpumask); ++ break; ++ default: ++ dev_err(dev, "Unknown FQ type: %d\n", fq->type); ++ } ++ fq->channel = dpaa2_get_channel_by_cpu(priv, fq->target_cpu); ++ } ++} ++ ++static int dpaa2_dpbp_setup(struct dpaa2_eth_priv *priv) ++{ ++ int err; ++ struct fsl_mc_device *dpbp_dev; ++ struct device *dev = priv->net_dev->dev.parent; ++ ++ err = fsl_mc_object_allocate(to_fsl_mc_device(dev), FSL_MC_POOL_DPBP, ++ &dpbp_dev); ++ if (err) { ++ dev_err(dev, "DPBP device allocation failed\n"); ++ return err; ++ } ++ ++ priv->dpbp_dev = dpbp_dev; ++ ++ err = dpbp_open(priv->mc_io, 0, priv->dpbp_dev->obj_desc.id, ++ &dpbp_dev->mc_handle); ++ if (err) { ++ dev_err(dev, "dpbp_open() failed\n"); ++ goto err_open; ++ } ++ ++ err = dpbp_enable(priv->mc_io, 0, dpbp_dev->mc_handle); ++ if (err) { ++ dev_err(dev, "dpbp_enable() failed\n"); ++ goto err_enable; ++ } ++ ++ err = dpbp_get_attributes(priv->mc_io, 0, dpbp_dev->mc_handle, ++ &priv->dpbp_attrs); ++ if (err) { ++ dev_err(dev, "dpbp_get_attributes() failed\n"); ++ goto err_get_attr; ++ } ++ ++ err = check_obj_version(dpbp_dev, priv->dpbp_attrs.version.major); ++ if (err) ++ goto err_dpbp_ver; ++ ++ return 0; ++ ++err_dpbp_ver: ++err_get_attr: ++ dpbp_disable(priv->mc_io, 0, dpbp_dev->mc_handle); ++err_enable: ++ dpbp_close(priv->mc_io, 0, dpbp_dev->mc_handle); ++err_open: ++ fsl_mc_object_free(dpbp_dev); ++ ++ return err; ++} ++ ++static void dpaa2_dpbp_free(struct dpaa2_eth_priv *priv) ++{ ++ __dpaa2_dpbp_free(priv); ++ dpbp_disable(priv->mc_io, 0, priv->dpbp_dev->mc_handle); ++ dpbp_close(priv->mc_io, 0, priv->dpbp_dev->mc_handle); ++ fsl_mc_object_free(priv->dpbp_dev); ++} ++ ++static int dpaa2_dpni_setup(struct fsl_mc_device *ls_dev) ++{ ++ struct device *dev = &ls_dev->dev; ++ struct dpaa2_eth_priv *priv; ++ struct net_device *net_dev; ++ void *dma_mem; ++ int err; ++ ++ net_dev = dev_get_drvdata(dev); ++ priv = netdev_priv(net_dev); ++ ++ priv->dpni_id = ls_dev->obj_desc.id; ++ ++ /* and get a handle for the DPNI this interface is associate with */ ++ err = dpni_open(priv->mc_io, 0, priv->dpni_id, &priv->mc_token); ++ if (err) { ++ dev_err(dev, "dpni_open() failed\n"); ++ goto err_open; ++ } ++ ++ ls_dev->mc_io = priv->mc_io; ++ ls_dev->mc_handle = priv->mc_token; ++ ++ dma_mem = kzalloc(DPAA2_EXT_CFG_SIZE, GFP_DMA | GFP_KERNEL); ++ if (!dma_mem) ++ goto err_alloc; ++ ++ priv->dpni_attrs.ext_cfg_iova = dma_map_single(dev, dma_mem, ++ DPAA2_EXT_CFG_SIZE, ++ DMA_FROM_DEVICE); ++ if (dma_mapping_error(dev, priv->dpni_attrs.ext_cfg_iova)) { ++ dev_err(dev, "dma mapping for dpni_ext_cfg failed\n"); ++ goto err_dma_map; ++ } ++ ++ err = dpni_get_attributes(priv->mc_io, 0, priv->mc_token, ++ &priv->dpni_attrs); ++ if (err) { ++ dev_err(dev, "dpni_get_attributes() failed (err=%d)\n", err); ++ dma_unmap_single(dev, priv->dpni_attrs.ext_cfg_iova, ++ DPAA2_EXT_CFG_SIZE, DMA_FROM_DEVICE); ++ goto err_get_attr; ++ } ++ ++ err = check_obj_version(ls_dev, priv->dpni_attrs.version.major); ++ if (err) ++ goto err_dpni_ver; ++ ++ dma_unmap_single(dev, priv->dpni_attrs.ext_cfg_iova, ++ DPAA2_EXT_CFG_SIZE, DMA_FROM_DEVICE); ++ ++ memset(&priv->dpni_ext_cfg, 0, sizeof(priv->dpni_ext_cfg)); ++ err = dpni_extract_extended_cfg(&priv->dpni_ext_cfg, dma_mem); ++ if (err) { ++ dev_err(dev, "dpni_extract_extended_cfg() failed\n"); ++ goto err_extract; ++ } ++ ++ /* Configure our buffers' layout */ ++ priv->buf_layout.options = DPNI_BUF_LAYOUT_OPT_PARSER_RESULT | ++ DPNI_BUF_LAYOUT_OPT_FRAME_STATUS | ++ DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE | ++ DPNI_BUF_LAYOUT_OPT_DATA_ALIGN; ++ priv->buf_layout.pass_parser_result = true; ++ priv->buf_layout.pass_frame_status = true; ++ priv->buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE; ++ /* HW erratum mandates data alignment in multiples of 256 */ ++ priv->buf_layout.data_align = DPAA2_ETH_RX_BUF_ALIGN; ++ /* ...rx, ... */ ++ err = dpni_set_rx_buffer_layout(priv->mc_io, 0, priv->mc_token, ++ &priv->buf_layout); ++ if (err) { ++ dev_err(dev, "dpni_set_rx_buffer_layout() failed"); ++ goto err_buf_layout; ++ } ++ /* ... tx, ... */ ++ /* remove Rx-only options */ ++ priv->buf_layout.options &= ~(DPNI_BUF_LAYOUT_OPT_DATA_ALIGN | ++ DPNI_BUF_LAYOUT_OPT_PARSER_RESULT); ++ err = dpni_set_tx_buffer_layout(priv->mc_io, 0, priv->mc_token, ++ &priv->buf_layout); ++ if (err) { ++ dev_err(dev, "dpni_set_tx_buffer_layout() failed"); ++ goto err_buf_layout; ++ } ++ /* ... tx-confirm. */ ++ priv->buf_layout.options &= ~DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE; ++ priv->buf_layout.options |= DPNI_BUF_LAYOUT_OPT_TIMESTAMP; ++ priv->buf_layout.pass_timestamp = 1; ++ err = dpni_set_tx_conf_buffer_layout(priv->mc_io, 0, priv->mc_token, ++ &priv->buf_layout); ++ if (err) { ++ dev_err(dev, "dpni_set_tx_conf_buffer_layout() failed"); ++ goto err_buf_layout; ++ } ++ /* Now that we've set our tx buffer layout, retrieve the minimum ++ * required tx data offset. ++ */ ++ err = dpni_get_tx_data_offset(priv->mc_io, 0, priv->mc_token, ++ &priv->tx_data_offset); ++ if (err) { ++ dev_err(dev, "dpni_get_tx_data_offset() failed\n"); ++ goto err_data_offset; ++ } ++ ++ /* Warn in case TX data offset is not multiple of 64 bytes. */ ++ WARN_ON(priv->tx_data_offset % 64); ++ ++ /* Accommodate SWA space. */ ++ priv->tx_data_offset += DPAA2_ETH_SWA_SIZE; ++ ++ /* allocate classification rule space */ ++ priv->cls_rule = kzalloc(sizeof(*priv->cls_rule) * ++ DPAA2_CLASSIFIER_ENTRY_COUNT, GFP_KERNEL); ++ if (!priv->cls_rule) ++ goto err_cls_rule; ++ ++ kfree(dma_mem); ++ ++ return 0; ++ ++err_cls_rule: ++err_data_offset: ++err_buf_layout: ++err_extract: ++err_dpni_ver: ++err_get_attr: ++err_dma_map: ++ kfree(dma_mem); ++err_alloc: ++ dpni_close(priv->mc_io, 0, priv->mc_token); ++err_open: ++ return err; ++} ++ ++static void dpaa2_dpni_free(struct dpaa2_eth_priv *priv) ++{ ++ int err; ++ ++ err = dpni_reset(priv->mc_io, 0, priv->mc_token); ++ if (err) ++ netdev_warn(priv->net_dev, "dpni_reset() failed (err %d)\n", ++ err); ++ ++ dpni_close(priv->mc_io, 0, priv->mc_token); ++} ++ ++static int dpaa2_rx_flow_setup(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_fq *fq) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ struct dpni_queue_attr rx_queue_attr; ++ struct dpni_queue_cfg queue_cfg; ++ int err; ++ ++ memset(&queue_cfg, 0, sizeof(queue_cfg)); ++ queue_cfg.options = DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST | ++ DPNI_QUEUE_OPT_TAILDROP_THRESHOLD; ++ queue_cfg.dest_cfg.dest_type = DPNI_DEST_DPCON; ++ queue_cfg.dest_cfg.priority = 1; ++ queue_cfg.user_ctx = (u64)fq; ++ queue_cfg.dest_cfg.dest_id = fq->channel->dpcon_id; ++ queue_cfg.tail_drop_threshold = DPAA2_ETH_TAILDROP_THRESH; ++ err = dpni_set_rx_flow(priv->mc_io, 0, priv->mc_token, 0, fq->flowid, ++ &queue_cfg); ++ if (err) { ++ dev_err(dev, "dpni_set_rx_flow() failed\n"); ++ return err; ++ } ++ ++ /* Get the actual FQID that was assigned by MC */ ++ err = dpni_get_rx_flow(priv->mc_io, 0, priv->mc_token, 0, fq->flowid, ++ &rx_queue_attr); ++ if (err) { ++ dev_err(dev, "dpni_get_rx_flow() failed\n"); ++ return err; ++ } ++ fq->fqid = rx_queue_attr.fqid; ++ ++ return 0; ++} ++ ++static int dpaa2_tx_flow_setup(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_fq *fq) ++{ ++ struct device *dev = priv->net_dev->dev.parent; ++ struct dpni_tx_flow_cfg tx_flow_cfg; ++ struct dpni_tx_conf_cfg tx_conf_cfg; ++ struct dpni_tx_conf_attr tx_conf_attr; ++ int err; ++ ++ memset(&tx_flow_cfg, 0, sizeof(tx_flow_cfg)); ++ tx_flow_cfg.options = DPNI_TX_FLOW_OPT_TX_CONF_ERROR; ++ tx_flow_cfg.use_common_tx_conf_queue = 0; ++ err = dpni_set_tx_flow(priv->mc_io, 0, priv->mc_token, ++ &fq->flowid, &tx_flow_cfg); ++ if (err) { ++ dev_err(dev, "dpni_set_tx_flow() failed\n"); ++ return err; ++ } ++ ++ tx_conf_cfg.errors_only = 0; ++ tx_conf_cfg.queue_cfg.options = DPNI_QUEUE_OPT_USER_CTX | ++ DPNI_QUEUE_OPT_DEST; ++ tx_conf_cfg.queue_cfg.user_ctx = (u64)fq; ++ tx_conf_cfg.queue_cfg.dest_cfg.dest_type = DPNI_DEST_DPCON; ++ tx_conf_cfg.queue_cfg.dest_cfg.dest_id = fq->channel->dpcon_id; ++ tx_conf_cfg.queue_cfg.dest_cfg.priority = 0; ++ ++ err = dpni_set_tx_conf(priv->mc_io, 0, priv->mc_token, fq->flowid, ++ &tx_conf_cfg); ++ if (err) { ++ dev_err(dev, "dpni_set_tx_conf() failed\n"); ++ return err; ++ } ++ ++ err = dpni_get_tx_conf(priv->mc_io, 0, priv->mc_token, fq->flowid, ++ &tx_conf_attr); ++ if (err) { ++ dev_err(dev, "dpni_get_tx_conf() failed\n"); ++ return err; ++ } ++ ++ fq->fqid = tx_conf_attr.queue_attr.fqid; ++ ++ return 0; ++} ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE ++static int dpaa2_rx_err_setup(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_fq *fq) ++{ ++ struct dpni_queue_attr queue_attr; ++ struct dpni_queue_cfg queue_cfg; ++ int err; ++ ++ /* Configure the Rx error queue to generate CDANs, ++ * just like the Rx queues */ ++ queue_cfg.options = DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST; ++ queue_cfg.dest_cfg.dest_type = DPNI_DEST_DPCON; ++ queue_cfg.dest_cfg.priority = 1; ++ queue_cfg.user_ctx = (u64)fq; ++ queue_cfg.dest_cfg.dest_id = fq->channel->dpcon_id; ++ err = dpni_set_rx_err_queue(priv->mc_io, 0, priv->mc_token, &queue_cfg); ++ if (err) { ++ netdev_err(priv->net_dev, "dpni_set_rx_err_queue() failed\n"); ++ return err; ++ } ++ ++ /* Get the FQID */ ++ err = dpni_get_rx_err_queue(priv->mc_io, 0, priv->mc_token, &queue_attr); ++ if (err) { ++ netdev_err(priv->net_dev, "dpni_get_rx_err_queue() failed\n"); ++ return err; ++ } ++ fq->fqid = queue_attr.fqid; ++ ++ return 0; ++} ++#endif ++ ++static int dpaa2_dpni_bind(struct dpaa2_eth_priv *priv) ++{ ++ struct net_device *net_dev = priv->net_dev; ++ struct device *dev = net_dev->dev.parent; ++ struct dpni_pools_cfg pools_params; ++ struct dpni_error_cfg err_cfg; ++ int err = 0; ++ int i; ++ ++ pools_params.num_dpbp = 1; ++ pools_params.pools[0].dpbp_id = priv->dpbp_dev->obj_desc.id; ++ pools_params.pools[0].backup_pool = 0; ++ pools_params.pools[0].buffer_size = DPAA2_ETH_RX_BUFFER_SIZE; ++ err = dpni_set_pools(priv->mc_io, 0, priv->mc_token, &pools_params); ++ if (err) { ++ dev_err(dev, "dpni_set_pools() failed\n"); ++ return err; ++ } ++ ++ dpaa2_cls_check(net_dev); ++ ++ /* have the interface implicitly distribute traffic based on supported ++ * header fields ++ */ ++ if (dpaa2_eth_hash_enabled(priv)) { ++ err = dpaa2_set_hash(net_dev, DPAA2_RXH_SUPPORTED); ++ if (err) ++ return err; ++ } ++ ++ /* Configure handling of error frames */ ++ err_cfg.errors = DPAA2_ETH_RX_ERR_MASK; ++ err_cfg.set_frame_annotation = 1; ++#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE ++ err_cfg.error_action = DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE; ++#else ++ err_cfg.error_action = DPNI_ERROR_ACTION_DISCARD; ++#endif ++ err = dpni_set_errors_behavior(priv->mc_io, 0, priv->mc_token, ++ &err_cfg); ++ if (err) { ++ dev_err(dev, "dpni_set_errors_behavior failed\n"); ++ return err; ++ } ++ ++ /* Configure Rx and Tx conf queues to generate CDANs */ ++ for (i = 0; i < priv->num_fqs; i++) { ++ switch (priv->fq[i].type) { ++ case DPAA2_RX_FQ: ++ err = dpaa2_rx_flow_setup(priv, &priv->fq[i]); ++ break; ++ case DPAA2_TX_CONF_FQ: ++ err = dpaa2_tx_flow_setup(priv, &priv->fq[i]); ++ break; ++#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE ++ case DPAA2_RX_ERR_FQ: ++ err = dpaa2_rx_err_setup(priv, &priv->fq[i]); ++ break; ++#endif ++ default: ++ dev_err(dev, "Invalid FQ type %d\n", priv->fq[i].type); ++ return -EINVAL; ++ } ++ if (err) ++ return err; ++ } ++ ++ err = dpni_get_qdid(priv->mc_io, 0, priv->mc_token, &priv->tx_qdid); ++ if (err) { ++ dev_err(dev, "dpni_get_qdid() failed\n"); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static int dpaa2_eth_alloc_rings(struct dpaa2_eth_priv *priv) ++{ ++ struct net_device *net_dev = priv->net_dev; ++ struct device *dev = net_dev->dev.parent; ++ int i; ++ ++ for (i = 0; i < priv->num_channels; i++) { ++ priv->channel[i]->store = ++ dpaa2_io_store_create(DPAA2_ETH_STORE_SIZE, dev); ++ if (!priv->channel[i]->store) { ++ netdev_err(net_dev, "dpaa2_io_store_create() failed\n"); ++ goto err_ring; ++ } ++ } ++ ++ return 0; ++ ++err_ring: ++ for (i = 0; i < priv->num_channels; i++) { ++ if (!priv->channel[i]->store) ++ break; ++ dpaa2_io_store_destroy(priv->channel[i]->store); ++ } ++ ++ return -ENOMEM; ++} ++ ++static void dpaa2_eth_free_rings(struct dpaa2_eth_priv *priv) ++{ ++ int i; ++ ++ for (i = 0; i < priv->num_channels; i++) ++ dpaa2_io_store_destroy(priv->channel[i]->store); ++} ++ ++static int dpaa2_eth_netdev_init(struct net_device *net_dev) ++{ ++ int err; ++ struct device *dev = net_dev->dev.parent; ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ u8 mac_addr[ETH_ALEN]; ++ u8 bcast_addr[ETH_ALEN]; ++ ++ net_dev->netdev_ops = &dpaa2_eth_ops; ++ ++ /* If the DPL contains all-0 mac_addr, set a random hardware address */ ++ err = dpni_get_primary_mac_addr(priv->mc_io, 0, priv->mc_token, ++ mac_addr); ++ if (err) { ++ dev_err(dev, "dpni_get_primary_mac_addr() failed (%d)", err); ++ return err; ++ } ++ if (is_zero_ether_addr(mac_addr)) { ++ /* Fills in net_dev->dev_addr, as required by ++ * register_netdevice() ++ */ ++ eth_hw_addr_random(net_dev); ++ /* Make the user aware, without cluttering the boot log */ ++ pr_info_once(KBUILD_MODNAME " device(s) have all-zero hwaddr, replaced with random"); ++ err = dpni_set_primary_mac_addr(priv->mc_io, 0, priv->mc_token, ++ net_dev->dev_addr); ++ if (err) { ++ dev_err(dev, "dpni_set_primary_mac_addr(): %d\n", err); ++ return err; ++ } ++ /* Override NET_ADDR_RANDOM set by eth_hw_addr_random(); for all ++ * practical purposes, this will be our "permanent" mac address, ++ * at least until the next reboot. This move will also permit ++ * register_netdevice() to properly fill up net_dev->perm_addr. ++ */ ++ net_dev->addr_assign_type = NET_ADDR_PERM; ++ } else { ++ /* NET_ADDR_PERM is default, all we have to do is ++ * fill in the device addr. ++ */ ++ memcpy(net_dev->dev_addr, mac_addr, net_dev->addr_len); ++ } ++ ++ /* Explicitly add the broadcast address to the MAC filtering table; ++ * the MC won't do that for us. ++ */ ++ eth_broadcast_addr(bcast_addr); ++ err = dpni_add_mac_addr(priv->mc_io, 0, priv->mc_token, bcast_addr); ++ if (err) { ++ dev_warn(dev, "dpni_add_mac_addr() failed (%d)\n", err); ++ /* Won't return an error; at least, we'd have egress traffic */ ++ } ++ ++ /* Reserve enough space to align buffer as per hardware requirement; ++ * NOTE: priv->tx_data_offset MUST be initialized at this point. ++ */ ++ net_dev->needed_headroom = DPAA2_ETH_NEEDED_HEADROOM(priv); ++ ++ /* Our .ndo_init will be called herein */ ++ err = register_netdev(net_dev); ++ if (err < 0) { ++ dev_err(dev, "register_netdev() = %d\n", err); ++ return err; ++ } ++ ++ return 0; ++} ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_LINK_POLL ++static int dpaa2_poll_link_state(void *arg) ++{ ++ struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)arg; ++ int err; ++ ++ while (!kthread_should_stop()) { ++ err = dpaa2_link_state_update(priv); ++ if (unlikely(err)) ++ return err; ++ ++ msleep(DPAA2_ETH_LINK_STATE_REFRESH); ++ } ++ ++ return 0; ++} ++#else ++static irqreturn_t dpni_irq0_handler(int irq_num, void *arg) ++{ ++ return IRQ_WAKE_THREAD; ++} ++ ++static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg) ++{ ++ u8 irq_index = DPNI_IRQ_INDEX; ++ u32 status, clear = 0; ++ struct device *dev = (struct device *)arg; ++ struct fsl_mc_device *dpni_dev = to_fsl_mc_device(dev); ++ struct net_device *net_dev = dev_get_drvdata(dev); ++ int err; ++ ++ netdev_dbg(net_dev, "IRQ %d received\n", irq_num); ++ err = dpni_get_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle, ++ irq_index, &status); ++ if (unlikely(err)) { ++ netdev_err(net_dev, "Can't get irq status (err %d)", err); ++ clear = 0xffffffff; ++ goto out; ++ } ++ ++ if (status & DPNI_IRQ_EVENT_LINK_CHANGED) { ++ clear |= DPNI_IRQ_EVENT_LINK_CHANGED; ++ dpaa2_link_state_update(netdev_priv(net_dev)); ++ } ++ ++out: ++ dpni_clear_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle, ++ irq_index, clear); ++ return IRQ_HANDLED; ++} ++ ++static int dpaa2_eth_setup_irqs(struct fsl_mc_device *ls_dev) ++{ ++ int err = 0; ++ struct fsl_mc_device_irq *irq; ++ int irq_count = ls_dev->obj_desc.irq_count; ++ u8 irq_index = DPNI_IRQ_INDEX; ++ u32 mask = DPNI_IRQ_EVENT_LINK_CHANGED; ++ ++ /* The only interrupt supported now is the link state notification. */ ++ if (WARN_ON(irq_count != 1)) ++ return -EINVAL; ++ ++ irq = ls_dev->irqs[0]; ++ err = devm_request_threaded_irq(&ls_dev->dev, irq->msi_desc->irq, ++ dpni_irq0_handler, ++ dpni_irq0_handler_thread, ++ IRQF_NO_SUSPEND | IRQF_ONESHOT, ++ dev_name(&ls_dev->dev), &ls_dev->dev); ++ if (err < 0) { ++ dev_err(&ls_dev->dev, "devm_request_threaded_irq(): %d", err); ++ return err; ++ } ++ ++ err = dpni_set_irq_mask(ls_dev->mc_io, 0, ls_dev->mc_handle, ++ irq_index, mask); ++ if (err < 0) { ++ dev_err(&ls_dev->dev, "dpni_set_irq_mask(): %d", err); ++ return err; ++ } ++ ++ err = dpni_set_irq_enable(ls_dev->mc_io, 0, ls_dev->mc_handle, ++ irq_index, 1); ++ if (err < 0) { ++ dev_err(&ls_dev->dev, "dpni_set_irq_enable(): %d", err); ++ return err; ++ } ++ ++ return 0; ++} ++#endif ++ ++static void dpaa2_eth_napi_add(struct dpaa2_eth_priv *priv) ++{ ++ int i; ++ struct dpaa2_eth_channel *ch; ++ ++ for (i = 0; i < priv->num_channels; i++) { ++ ch = priv->channel[i]; ++ /* NAPI weight *MUST* be a multiple of DPAA2_ETH_STORE_SIZE */ ++ netif_napi_add(priv->net_dev, &ch->napi, dpaa2_eth_poll, ++ NAPI_POLL_WEIGHT); ++ } ++} ++ ++static void dpaa2_eth_napi_del(struct dpaa2_eth_priv *priv) ++{ ++ int i; ++ struct dpaa2_eth_channel *ch; ++ ++ for (i = 0; i < priv->num_channels; i++) { ++ ch = priv->channel[i]; ++ netif_napi_del(&ch->napi); ++ } ++} ++ ++/* SysFS support */ ++ ++static ssize_t dpaa2_eth_show_tx_shaping(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(to_net_dev(dev)); ++ /* No MC API for getting the shaping config. We're stateful. */ ++ struct dpni_tx_shaping_cfg *scfg = &priv->shaping_cfg; ++ ++ return sprintf(buf, "%u %hu\n", scfg->rate_limit, scfg->max_burst_size); ++} ++ ++static ssize_t dpaa2_eth_write_tx_shaping(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, ++ size_t count) ++{ ++ int err, items; ++ struct dpaa2_eth_priv *priv = netdev_priv(to_net_dev(dev)); ++ struct dpni_tx_shaping_cfg scfg; ++ ++ items = sscanf(buf, "%u %hu", &scfg.rate_limit, &scfg.max_burst_size); ++ if (items != 2) { ++ pr_err("Expected format: \"rate_limit(Mbps) max_burst_size(bytes)\"\n"); ++ return -EINVAL; ++ } ++ /* Size restriction as per MC API documentation */ ++ if (scfg.max_burst_size > 64000) { ++ pr_err("max_burst_size must be <= 64000, thanks.\n"); ++ return -EINVAL; ++ } ++ ++ err = dpni_set_tx_shaping(priv->mc_io, 0, priv->mc_token, &scfg); ++ if (err) { ++ dev_err(dev, "dpni_set_tx_shaping() failed\n"); ++ return -EPERM; ++ } ++ /* If successful, save the current configuration for future inquiries */ ++ priv->shaping_cfg = scfg; ++ ++ return count; ++} ++ ++static ssize_t dpaa2_eth_show_txconf_cpumask(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(to_net_dev(dev)); ++ ++ return cpumap_print_to_pagebuf(1, buf, &priv->txconf_cpumask); ++} ++ ++static ssize_t dpaa2_eth_write_txconf_cpumask(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, ++ size_t count) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(to_net_dev(dev)); ++ struct dpaa2_eth_fq *fq; ++ bool running = netif_running(priv->net_dev); ++ int i, err; ++ ++ err = cpulist_parse(buf, &priv->txconf_cpumask); ++ if (err) ++ return err; ++ ++ /* Only accept CPUs that have an affine DPIO */ ++ if (!cpumask_subset(&priv->txconf_cpumask, &priv->dpio_cpumask)) { ++ netdev_info(priv->net_dev, ++ "cpumask must be a subset of 0x%lx\n", ++ *cpumask_bits(&priv->dpio_cpumask)); ++ cpumask_and(&priv->txconf_cpumask, &priv->dpio_cpumask, ++ &priv->txconf_cpumask); ++ } ++ ++ /* Rewiring the TxConf FQs requires interface shutdown. ++ */ ++ if (running) { ++ err = dpaa2_eth_stop(priv->net_dev); ++ if (err) ++ return -ENODEV; ++ } ++ ++ /* Set the new TxConf FQ affinities */ ++ dpaa2_set_fq_affinity(priv); ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_LINK_POLL ++ /* dpaa2_eth_open() below will *stop* the Tx queues until an explicit ++ * link up notification is received. Give the polling thread enough time ++ * to detect the link state change, or else we'll end up with the ++ * transmission side forever shut down. ++ */ ++ msleep(2 * DPAA2_ETH_LINK_STATE_REFRESH); ++#endif ++ ++ for (i = 0; i < priv->num_fqs; i++) { ++ fq = &priv->fq[i]; ++ if (fq->type != DPAA2_TX_CONF_FQ) ++ continue; ++ dpaa2_tx_flow_setup(priv, fq); ++ } ++ ++ if (running) { ++ err = dpaa2_eth_open(priv->net_dev); ++ if (err) ++ return -ENODEV; ++ } ++ ++ return count; ++} ++ ++static struct device_attribute dpaa2_eth_attrs[] = { ++ __ATTR(txconf_cpumask, ++ S_IRUSR | S_IWUSR, ++ dpaa2_eth_show_txconf_cpumask, ++ dpaa2_eth_write_txconf_cpumask), ++ ++ __ATTR(tx_shaping, ++ S_IRUSR | S_IWUSR, ++ dpaa2_eth_show_tx_shaping, ++ dpaa2_eth_write_tx_shaping), ++}; ++ ++void dpaa2_eth_sysfs_init(struct device *dev) ++{ ++ int i, err; ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_eth_attrs); i++) { ++ err = device_create_file(dev, &dpaa2_eth_attrs[i]); ++ if (err) { ++ dev_err(dev, "ERROR creating sysfs file\n"); ++ goto undo; ++ } ++ } ++ return; ++ ++undo: ++ while (i > 0) ++ device_remove_file(dev, &dpaa2_eth_attrs[--i]); ++} ++ ++void dpaa2_eth_sysfs_remove(struct device *dev) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_eth_attrs); i++) ++ device_remove_file(dev, &dpaa2_eth_attrs[i]); ++} ++ ++static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) ++{ ++ struct device *dev; ++ struct net_device *net_dev = NULL; ++ struct dpaa2_eth_priv *priv = NULL; ++ int err = 0; ++ ++ dev = &dpni_dev->dev; ++ ++ /* Net device */ ++ net_dev = alloc_etherdev_mq(sizeof(*priv), DPAA2_ETH_MAX_TX_QUEUES); ++ if (!net_dev) { ++ dev_err(dev, "alloc_etherdev_mq() failed\n"); ++ return -ENOMEM; ++ } ++ ++ SET_NETDEV_DEV(net_dev, dev); ++ dev_set_drvdata(dev, net_dev); ++ ++ priv = netdev_priv(net_dev); ++ priv->net_dev = net_dev; ++ priv->msg_enable = netif_msg_init(debug, -1); ++ ++ /* Obtain a MC portal */ ++ err = fsl_mc_portal_allocate(dpni_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL, ++ &priv->mc_io); ++ if (err) { ++ dev_err(dev, "MC portal allocation failed\n"); ++ goto err_portal_alloc; ++ } ++ ++#ifndef CONFIG_FSL_DPAA2_ETH_LINK_POLL ++ err = fsl_mc_allocate_irqs(dpni_dev); ++ if (err) { ++ dev_err(dev, "MC irqs allocation failed\n"); ++ goto err_irqs_alloc; ++ } ++#endif ++ ++ /* DPNI initialization */ ++ err = dpaa2_dpni_setup(dpni_dev); ++ if (err < 0) ++ goto err_dpni_setup; ++ ++ /* DPIO */ ++ err = dpaa2_dpio_setup(priv); ++ if (err) ++ goto err_dpio_setup; ++ ++ /* FQs */ ++ dpaa2_eth_setup_fqs(priv); ++ dpaa2_set_fq_affinity(priv); ++ ++ /* DPBP */ ++ err = dpaa2_dpbp_setup(priv); ++ if (err) ++ goto err_dpbp_setup; ++ ++ /* DPNI binding to DPIO and DPBPs */ ++ err = dpaa2_dpni_bind(priv); ++ if (err) ++ goto err_bind; ++ ++ dpaa2_eth_napi_add(priv); ++ ++ /* Percpu statistics */ ++ priv->percpu_stats = alloc_percpu(*priv->percpu_stats); ++ if (!priv->percpu_stats) { ++ dev_err(dev, "alloc_percpu(percpu_stats) failed\n"); ++ err = -ENOMEM; ++ goto err_alloc_percpu_stats; ++ } ++ priv->percpu_extras = alloc_percpu(*priv->percpu_extras); ++ if (!priv->percpu_extras) { ++ dev_err(dev, "alloc_percpu(percpu_extras) failed\n"); ++ err = -ENOMEM; ++ goto err_alloc_percpu_extras; ++ } ++ ++ snprintf(net_dev->name, IFNAMSIZ, "ni%d", dpni_dev->obj_desc.id); ++ if (!dev_valid_name(net_dev->name)) { ++ dev_warn(&net_dev->dev, ++ "netdevice name \"%s\" cannot be used, reverting to default..\n", ++ net_dev->name); ++ dev_alloc_name(net_dev, "eth%d"); ++ dev_warn(&net_dev->dev, "using name \"%s\"\n", net_dev->name); ++ } ++ ++ err = dpaa2_eth_netdev_init(net_dev); ++ if (err) ++ goto err_netdev_init; ++ ++ /* Configure checksum offload based on current interface flags */ ++ err = dpaa2_eth_set_rx_csum(priv, ++ !!(net_dev->features & NETIF_F_RXCSUM)); ++ if (err) ++ goto err_csum; ++ ++ err = dpaa2_eth_set_tx_csum(priv, ++ !!(net_dev->features & ++ (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM))); ++ if (err) ++ goto err_csum; ++ ++ err = dpaa2_eth_alloc_rings(priv); ++ if (err) ++ goto err_alloc_rings; ++ ++ net_dev->ethtool_ops = &dpaa2_ethtool_ops; ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_LINK_POLL ++ priv->poll_thread = kthread_run(dpaa2_poll_link_state, priv, ++ "%s_poll_link", net_dev->name); ++#else ++ err = dpaa2_eth_setup_irqs(dpni_dev); ++ if (err) { ++ netdev_err(net_dev, "ERROR %d setting up interrupts", err); ++ goto err_setup_irqs; ++ } ++#endif ++ ++ dpaa2_eth_sysfs_init(&net_dev->dev); ++ dpaa2_dbg_add(priv); ++ ++ dev_info(dev, "Probed interface %s\n", net_dev->name); ++ return 0; ++ ++#ifndef CONFIG_FSL_DPAA2_ETH_LINK_POLL ++err_setup_irqs: ++#endif ++ dpaa2_eth_free_rings(priv); ++err_alloc_rings: ++err_csum: ++ unregister_netdev(net_dev); ++err_netdev_init: ++ free_percpu(priv->percpu_extras); ++err_alloc_percpu_extras: ++ free_percpu(priv->percpu_stats); ++err_alloc_percpu_stats: ++ dpaa2_eth_napi_del(priv); ++err_bind: ++ dpaa2_dpbp_free(priv); ++err_dpbp_setup: ++ dpaa2_dpio_free(priv); ++err_dpio_setup: ++ kfree(priv->cls_rule); ++ dpni_close(priv->mc_io, 0, priv->mc_token); ++err_dpni_setup: ++#ifndef CONFIG_FSL_DPAA2_ETH_LINK_POLL ++ fsl_mc_free_irqs(dpni_dev); ++err_irqs_alloc: ++#endif ++ fsl_mc_portal_free(priv->mc_io); ++err_portal_alloc: ++ dev_set_drvdata(dev, NULL); ++ free_netdev(net_dev); ++ ++ return err; ++} ++ ++static int dpaa2_eth_remove(struct fsl_mc_device *ls_dev) ++{ ++ struct device *dev; ++ struct net_device *net_dev; ++ struct dpaa2_eth_priv *priv; ++ ++ dev = &ls_dev->dev; ++ net_dev = dev_get_drvdata(dev); ++ priv = netdev_priv(net_dev); ++ ++ dpaa2_dbg_remove(priv); ++ dpaa2_eth_sysfs_remove(&net_dev->dev); ++ ++ unregister_netdev(net_dev); ++ dev_info(net_dev->dev.parent, "Removed interface %s\n", net_dev->name); ++ ++ dpaa2_dpio_free(priv); ++ dpaa2_eth_free_rings(priv); ++ dpaa2_eth_napi_del(priv); ++ dpaa2_dpbp_free(priv); ++ dpaa2_dpni_free(priv); ++ ++ fsl_mc_portal_free(priv->mc_io); ++ ++ free_percpu(priv->percpu_stats); ++ free_percpu(priv->percpu_extras); ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_LINK_POLL ++ kthread_stop(priv->poll_thread); ++#else ++ fsl_mc_free_irqs(ls_dev); ++#endif ++ ++ kfree(priv->cls_rule); ++ ++ dev_set_drvdata(dev, NULL); ++ free_netdev(net_dev); ++ ++ return 0; ++} ++ ++static const struct fsl_mc_device_match_id dpaa2_eth_match_id_table[] = { ++ { ++ .vendor = FSL_MC_VENDOR_FREESCALE, ++ .obj_type = "dpni", ++ .ver_major = DPNI_VER_MAJOR, ++ .ver_minor = DPNI_VER_MINOR ++ }, ++ { .vendor = 0x0 } ++}; ++ ++static struct fsl_mc_driver dpaa2_eth_driver = { ++ .driver = { ++ .name = KBUILD_MODNAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = dpaa2_eth_probe, ++ .remove = dpaa2_eth_remove, ++ .match_id_table = dpaa2_eth_match_id_table ++}; ++ ++static int __init dpaa2_eth_driver_init(void) ++{ ++ int err; ++ ++ dpaa2_eth_dbg_init(); ++ ++ err = fsl_mc_driver_register(&dpaa2_eth_driver); ++ if (err) { ++ dpaa2_eth_dbg_exit(); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static void __exit dpaa2_eth_driver_exit(void) ++{ ++ fsl_mc_driver_unregister(&dpaa2_eth_driver); ++ dpaa2_eth_dbg_exit(); ++} ++ ++module_init(dpaa2_eth_driver_init); ++module_exit(dpaa2_eth_driver_exit); +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h +@@ -0,0 +1,366 @@ ++/* Copyright 2014-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#ifndef __DPAA2_ETH_H ++#define __DPAA2_ETH_H ++ ++#include ++#include ++#include "../../fsl-mc/include/fsl_dpaa2_io.h" ++#include "../../fsl-mc/include/fsl_dpaa2_fd.h" ++#include "../../fsl-mc/include/dpbp.h" ++#include "../../fsl-mc/include/dpbp-cmd.h" ++#include "../../fsl-mc/include/dpcon.h" ++#include "../../fsl-mc/include/dpcon-cmd.h" ++#include "../../fsl-mc/include/dpmng.h" ++#include "dpni.h" ++#include "dpni-cmd.h" ++ ++#include "dpaa2-eth-trace.h" ++#include "dpaa2-eth-debugfs.h" ++ ++#define DPAA2_ETH_STORE_SIZE 16 ++ ++/* Maximum receive frame size is 64K */ ++#define DPAA2_ETH_MAX_SG_ENTRIES ((64 * 1024) / DPAA2_ETH_RX_BUFFER_SIZE) ++ ++/* Maximum acceptable MTU value. It is in direct relation with the MC-enforced ++ * Max Frame Length (currently 10k). ++ */ ++#define DPAA2_ETH_MFL (10 * 1024) ++#define DPAA2_ETH_MAX_MTU (DPAA2_ETH_MFL - VLAN_ETH_HLEN) ++/* Convert L3 MTU to L2 MFL */ ++#define DPAA2_ETH_L2_MAX_FRM(mtu) (mtu + VLAN_ETH_HLEN) ++ ++/* Set the taildrop threshold (in bytes) to allow the enqueue of several jumbo ++ * frames in the Rx queues (length of the current frame is not ++ * taken into account when making the taildrop decision) ++ */ ++#define DPAA2_ETH_TAILDROP_THRESH (64 * 1024) ++ ++/* Buffer quota per queue. Must be large enough such that for minimum sized ++ * frames taildrop kicks in before the bpool gets depleted, so we compute ++ * how many 64B frames fit inside the taildrop threshold and add a margin ++ * to accommodate the buffer refill delay. ++ */ ++#define DPAA2_ETH_MAX_FRAMES_PER_QUEUE (DPAA2_ETH_TAILDROP_THRESH / 64) ++#define DPAA2_ETH_NUM_BUFS (DPAA2_ETH_MAX_FRAMES_PER_QUEUE + 256) ++#define DPAA2_ETH_REFILL_THRESH DPAA2_ETH_MAX_FRAMES_PER_QUEUE ++ ++/* Hardware requires alignment for ingress/egress buffer addresses ++ * and ingress buffer lengths. ++ */ ++#define DPAA2_ETH_RX_BUFFER_SIZE 2048 ++#define DPAA2_ETH_TX_BUF_ALIGN 64 ++#define DPAA2_ETH_RX_BUF_ALIGN 256 ++#define DPAA2_ETH_NEEDED_HEADROOM(p_priv) \ ++ ((p_priv)->tx_data_offset + DPAA2_ETH_TX_BUF_ALIGN) ++ ++#define DPAA2_ETH_BUF_RAW_SIZE \ ++ (DPAA2_ETH_RX_BUFFER_SIZE + \ ++ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + \ ++ DPAA2_ETH_RX_BUF_ALIGN) ++ ++/* PTP nominal frequency 1MHz */ ++#define DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS 1000 ++ ++/* We are accommodating a skb backpointer and some S/G info ++ * in the frame's software annotation. The hardware ++ * options are either 0 or 64, so we choose the latter. ++ */ ++#define DPAA2_ETH_SWA_SIZE 64 ++ ++/* Must keep this struct smaller than DPAA2_ETH_SWA_SIZE */ ++struct dpaa2_eth_swa { ++ struct sk_buff *skb; ++ struct scatterlist *scl; ++ int num_sg; ++ int num_dma_bufs; ++}; ++ ++/* Annotation valid bits in FD FRC */ ++#define DPAA2_FD_FRC_FASV 0x8000 ++#define DPAA2_FD_FRC_FAEADV 0x4000 ++#define DPAA2_FD_FRC_FAPRV 0x2000 ++#define DPAA2_FD_FRC_FAIADV 0x1000 ++#define DPAA2_FD_FRC_FASWOV 0x0800 ++#define DPAA2_FD_FRC_FAICFDV 0x0400 ++ ++/* Annotation bits in FD CTRL */ ++#define DPAA2_FD_CTRL_ASAL 0x00020000 /* ASAL = 128 */ ++#define DPAA2_FD_CTRL_PTA 0x00800000 ++#define DPAA2_FD_CTRL_PTV1 0x00400000 ++ ++/* Frame annotation status */ ++struct dpaa2_fas { ++ u8 reserved; ++ u8 ppid; ++ __le16 ifpid; ++ __le32 status; ++} __packed; ++ ++/* Debug frame, otherwise supposed to be discarded */ ++#define DPAA2_ETH_FAS_DISC 0x80000000 ++/* MACSEC frame */ ++#define DPAA2_ETH_FAS_MS 0x40000000 ++#define DPAA2_ETH_FAS_PTP 0x08000000 ++/* Ethernet multicast frame */ ++#define DPAA2_ETH_FAS_MC 0x04000000 ++/* Ethernet broadcast frame */ ++#define DPAA2_ETH_FAS_BC 0x02000000 ++#define DPAA2_ETH_FAS_KSE 0x00040000 ++#define DPAA2_ETH_FAS_EOFHE 0x00020000 ++#define DPAA2_ETH_FAS_MNLE 0x00010000 ++#define DPAA2_ETH_FAS_TIDE 0x00008000 ++#define DPAA2_ETH_FAS_PIEE 0x00004000 ++/* Frame length error */ ++#define DPAA2_ETH_FAS_FLE 0x00002000 ++/* Frame physical error; our favourite pastime */ ++#define DPAA2_ETH_FAS_FPE 0x00001000 ++#define DPAA2_ETH_FAS_PTE 0x00000080 ++#define DPAA2_ETH_FAS_ISP 0x00000040 ++#define DPAA2_ETH_FAS_PHE 0x00000020 ++#define DPAA2_ETH_FAS_BLE 0x00000010 ++/* L3 csum validation performed */ ++#define DPAA2_ETH_FAS_L3CV 0x00000008 ++/* L3 csum error */ ++#define DPAA2_ETH_FAS_L3CE 0x00000004 ++/* L4 csum validation performed */ ++#define DPAA2_ETH_FAS_L4CV 0x00000002 ++/* L4 csum error */ ++#define DPAA2_ETH_FAS_L4CE 0x00000001 ++/* These bits always signal errors */ ++#define DPAA2_ETH_RX_ERR_MASK (DPAA2_ETH_FAS_KSE | \ ++ DPAA2_ETH_FAS_EOFHE | \ ++ DPAA2_ETH_FAS_MNLE | \ ++ DPAA2_ETH_FAS_TIDE | \ ++ DPAA2_ETH_FAS_PIEE | \ ++ DPAA2_ETH_FAS_FLE | \ ++ DPAA2_ETH_FAS_FPE | \ ++ DPAA2_ETH_FAS_PTE | \ ++ DPAA2_ETH_FAS_ISP | \ ++ DPAA2_ETH_FAS_PHE | \ ++ DPAA2_ETH_FAS_BLE | \ ++ DPAA2_ETH_FAS_L3CE | \ ++ DPAA2_ETH_FAS_L4CE) ++/* Unsupported features in the ingress */ ++#define DPAA2_ETH_RX_UNSUPP_MASK DPAA2_ETH_FAS_MS ++/* Tx errors */ ++#define DPAA2_ETH_TXCONF_ERR_MASK (DPAA2_ETH_FAS_KSE | \ ++ DPAA2_ETH_FAS_EOFHE | \ ++ DPAA2_ETH_FAS_MNLE | \ ++ DPAA2_ETH_FAS_TIDE) ++ ++/* Time in milliseconds between link state updates */ ++#define DPAA2_ETH_LINK_STATE_REFRESH 1000 ++ ++/* Driver statistics, other than those in struct rtnl_link_stats64. ++ * These are usually collected per-CPU and aggregated by ethtool. ++ */ ++struct dpaa2_eth_stats { ++ __u64 tx_conf_frames; ++ __u64 tx_conf_bytes; ++ __u64 tx_sg_frames; ++ __u64 tx_sg_bytes; ++ __u64 rx_sg_frames; ++ __u64 rx_sg_bytes; ++ /* Enqueues retried due to portal busy */ ++ __u64 tx_portal_busy; ++}; ++ ++/* Per-FQ statistics */ ++struct dpaa2_eth_fq_stats { ++ /* Number of frames received on this queue */ ++ __u64 frames; ++}; ++ ++/* Per-channel statistics */ ++struct dpaa2_eth_ch_stats { ++ /* Volatile dequeues retried due to portal busy */ ++ __u64 dequeue_portal_busy; ++ /* Number of CDANs; useful to estimate avg NAPI len */ ++ __u64 cdan; ++ /* Number of frames received on queues from this channel */ ++ __u64 frames; ++}; ++ ++/* Maximum number of Rx queues associated with a DPNI */ ++#define DPAA2_ETH_MAX_RX_QUEUES 16 ++#define DPAA2_ETH_MAX_TX_QUEUES NR_CPUS ++#define DPAA2_ETH_MAX_RX_ERR_QUEUES 1 ++#define DPAA2_ETH_MAX_QUEUES (DPAA2_ETH_MAX_RX_QUEUES + \ ++ DPAA2_ETH_MAX_TX_QUEUES + \ ++ DPAA2_ETH_MAX_RX_ERR_QUEUES) ++ ++#define DPAA2_ETH_MAX_DPCONS NR_CPUS ++ ++enum dpaa2_eth_fq_type { ++ DPAA2_RX_FQ = 0, ++ DPAA2_TX_CONF_FQ, ++ DPAA2_RX_ERR_FQ ++}; ++ ++struct dpaa2_eth_priv; ++ ++struct dpaa2_eth_fq { ++ u32 fqid; ++ u16 flowid; ++ int target_cpu; ++ struct dpaa2_eth_channel *channel; ++ enum dpaa2_eth_fq_type type; ++ ++ void (*consume)(struct dpaa2_eth_priv *, ++ struct dpaa2_eth_channel *, ++ const struct dpaa2_fd *, ++ struct napi_struct *); ++ struct dpaa2_eth_priv *netdev_priv; /* backpointer */ ++ struct dpaa2_eth_fq_stats stats; ++}; ++ ++struct dpaa2_eth_channel { ++ struct dpaa2_io_notification_ctx nctx; ++ struct fsl_mc_device *dpcon; ++ int dpcon_id; ++ int ch_id; ++ int dpio_id; ++ struct napi_struct napi; ++ struct dpaa2_io_store *store; ++ struct dpaa2_eth_priv *priv; ++ int buf_count; ++ struct dpaa2_eth_ch_stats stats; ++}; ++ ++struct dpaa2_cls_rule { ++ struct ethtool_rx_flow_spec fs; ++ bool in_use; ++}; ++ ++struct dpaa2_eth_priv { ++ struct net_device *net_dev; ++ ++ u8 num_fqs; ++ /* First queue is tx conf, the rest are rx */ ++ struct dpaa2_eth_fq fq[DPAA2_ETH_MAX_QUEUES]; ++ ++ u8 num_channels; ++ struct dpaa2_eth_channel *channel[DPAA2_ETH_MAX_DPCONS]; ++ ++ int dpni_id; ++ struct dpni_attr dpni_attrs; ++ struct dpni_extended_cfg dpni_ext_cfg; ++ /* Insofar as the MC is concerned, we're using one layout on all 3 types ++ * of buffers (Rx, Tx, Tx-Conf). ++ */ ++ struct dpni_buffer_layout buf_layout; ++ u16 tx_data_offset; ++ ++ struct fsl_mc_device *dpbp_dev; ++ struct dpbp_attr dpbp_attrs; ++ ++ u16 tx_qdid; ++ struct fsl_mc_io *mc_io; ++ /* SysFS-controlled affinity mask for TxConf FQs */ ++ struct cpumask txconf_cpumask; ++ /* Cores which have an affine DPIO/DPCON. ++ * This is the cpu set on which Rx frames are processed; ++ * Tx confirmation frames are processed on a subset of this, ++ * depending on user settings. ++ */ ++ struct cpumask dpio_cpumask; ++ ++ /* Standard statistics */ ++ struct rtnl_link_stats64 __percpu *percpu_stats; ++ /* Extra stats, in addition to the ones known by the kernel */ ++ struct dpaa2_eth_stats __percpu *percpu_extras; ++ u32 msg_enable; /* net_device message level */ ++ ++ u16 mc_token; ++ ++ struct dpni_link_state link_state; ++ struct task_struct *poll_thread; ++ ++ /* enabled ethtool hashing bits */ ++ u64 rx_hash_fields; ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_DEBUGFS ++ struct dpaa2_debugfs dbg; ++#endif ++ ++ /* array of classification rules */ ++ struct dpaa2_cls_rule *cls_rule; ++ ++ struct dpni_tx_shaping_cfg shaping_cfg; ++ ++ bool ts_tx_en; /* Tx timestamping enabled */ ++ bool ts_rx_en; /* Rx timestamping enabled */ ++}; ++ ++/* default Rx hash options, set during probing */ ++#define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \ ++ | RXH_IP_SRC | RXH_IP_DST | RXH_L4_B_0_1 \ ++ | RXH_L4_B_2_3) ++ ++#define dpaa2_eth_hash_enabled(priv) \ ++ ((priv)->dpni_attrs.options & DPNI_OPT_DIST_HASH) ++ ++#define dpaa2_eth_fs_enabled(priv) \ ++ ((priv)->dpni_attrs.options & DPNI_OPT_DIST_FS) ++ ++#define DPAA2_CLASSIFIER_ENTRY_COUNT 16 ++ ++/* Required by struct dpni_attr::ext_cfg_iova */ ++#define DPAA2_EXT_CFG_SIZE 256 ++ ++extern const struct ethtool_ops dpaa2_ethtool_ops; ++ ++int dpaa2_set_hash(struct net_device *net_dev, u64 flags); ++ ++static int dpaa2_queue_count(struct dpaa2_eth_priv *priv) ++{ ++ if (!dpaa2_eth_hash_enabled(priv)) ++ return 1; ++ ++ return priv->dpni_ext_cfg.tc_cfg[0].max_dist; ++} ++ ++static inline int dpaa2_max_channels(struct dpaa2_eth_priv *priv) ++{ ++ /* Ideally, we want a number of channels large enough ++ * to accommodate both the Rx distribution size ++ * and the max number of Tx confirmation queues ++ */ ++ return max_t(int, dpaa2_queue_count(priv), ++ priv->dpni_attrs.max_senders); ++} ++ ++void dpaa2_cls_check(struct net_device *); ++ ++#endif /* __DPAA2_H */ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c +@@ -0,0 +1,882 @@ ++/* Copyright 2014-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include "dpni.h" /* DPNI_LINK_OPT_* */ ++#include "dpaa2-eth.h" ++ ++/* size of DMA memory used to pass configuration to classifier, in bytes */ ++#define DPAA2_CLASSIFIER_DMA_SIZE 256 ++ ++/* To be kept in sync with 'enum dpni_counter' */ ++char dpaa2_ethtool_stats[][ETH_GSTRING_LEN] = { ++ "rx frames", ++ "rx bytes", ++ "rx frames dropped", ++ "rx err frames", ++ "rx mcast frames", ++ "rx mcast bytes", ++ "rx bcast frames", ++ "rx bcast bytes", ++ "tx frames", ++ "tx bytes", ++ "tx err frames", ++}; ++ ++#define DPAA2_ETH_NUM_STATS ARRAY_SIZE(dpaa2_ethtool_stats) ++ ++/* To be kept in sync with 'struct dpaa2_eth_stats' */ ++char dpaa2_ethtool_extras[][ETH_GSTRING_LEN] = { ++ /* per-cpu stats */ ++ ++ "tx conf frames", ++ "tx conf bytes", ++ "tx sg frames", ++ "tx sg bytes", ++ "rx sg frames", ++ "rx sg bytes", ++ /* how many times we had to retry the enqueue command */ ++ "tx portal busy", ++ ++ /* Channel stats */ ++ ++ /* How many times we had to retry the volatile dequeue command */ ++ "portal busy", ++ /* Number of notifications received */ ++ "cdan", ++#ifdef CONFIG_FSL_QBMAN_DEBUG ++ /* FQ stats */ ++ "rx pending frames", ++ "rx pending bytes", ++ "tx conf pending frames", ++ "tx conf pending bytes", ++ "buffer count" ++#endif ++}; ++ ++#define DPAA2_ETH_NUM_EXTRA_STATS ARRAY_SIZE(dpaa2_ethtool_extras) ++ ++static void dpaa2_get_drvinfo(struct net_device *net_dev, ++ struct ethtool_drvinfo *drvinfo) ++{ ++ struct mc_version mc_ver; ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ char fw_version[ETHTOOL_FWVERS_LEN]; ++ char version[32]; ++ int err; ++ ++ err = mc_get_version(priv->mc_io, 0, &mc_ver); ++ if (err) { ++ strlcpy(drvinfo->fw_version, "Error retrieving MC version", ++ sizeof(drvinfo->fw_version)); ++ } else { ++ scnprintf(fw_version, sizeof(fw_version), "%d.%d.%d", ++ mc_ver.major, mc_ver.minor, mc_ver.revision); ++ strlcpy(drvinfo->fw_version, fw_version, ++ sizeof(drvinfo->fw_version)); ++ } ++ ++ scnprintf(version, sizeof(version), "%d.%d", DPNI_VER_MAJOR, ++ DPNI_VER_MINOR); ++ strlcpy(drvinfo->version, version, sizeof(drvinfo->version)); ++ ++ strlcpy(drvinfo->driver, KBUILD_MODNAME, sizeof(drvinfo->driver)); ++ strlcpy(drvinfo->bus_info, dev_name(net_dev->dev.parent->parent), ++ sizeof(drvinfo->bus_info)); ++} ++ ++static u32 dpaa2_get_msglevel(struct net_device *net_dev) ++{ ++ return ((struct dpaa2_eth_priv *)netdev_priv(net_dev))->msg_enable; ++} ++ ++static void dpaa2_set_msglevel(struct net_device *net_dev, ++ u32 msg_enable) ++{ ++ ((struct dpaa2_eth_priv *)netdev_priv(net_dev))->msg_enable = ++ msg_enable; ++} ++ ++static int dpaa2_get_settings(struct net_device *net_dev, ++ struct ethtool_cmd *cmd) ++{ ++ struct dpni_link_state state = {0}; ++ int err = 0; ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ ++ err = dpni_get_link_state(priv->mc_io, 0, priv->mc_token, &state); ++ if (err) { ++ netdev_err(net_dev, "ERROR %d getting link state", err); ++ goto out; ++ } ++ ++ /* At the moment, we have no way of interrogating the DPMAC ++ * from the DPNI side - and for that matter there may exist ++ * no DPMAC at all. So for now we just don't report anything ++ * beyond the DPNI attributes. ++ */ ++ if (state.options & DPNI_LINK_OPT_AUTONEG) ++ cmd->autoneg = AUTONEG_ENABLE; ++ if (!(state.options & DPNI_LINK_OPT_HALF_DUPLEX)) ++ cmd->duplex = DUPLEX_FULL; ++ ethtool_cmd_speed_set(cmd, state.rate); ++ ++out: ++ return err; ++} ++ ++static int dpaa2_set_settings(struct net_device *net_dev, ++ struct ethtool_cmd *cmd) ++{ ++ struct dpni_link_cfg cfg = {0}; ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ int err = 0; ++ ++ netdev_dbg(net_dev, "Setting link parameters..."); ++ ++ /* Due to a temporary firmware limitation, the DPNI must be down ++ * in order to be able to change link settings. Taking steps to let ++ * the user know that. ++ */ ++ if (netif_running(net_dev)) { ++ netdev_info(net_dev, "Sorry, interface must be brought down first.\n"); ++ return -EACCES; ++ } ++ ++ cfg.rate = ethtool_cmd_speed(cmd); ++ if (cmd->autoneg == AUTONEG_ENABLE) ++ cfg.options |= DPNI_LINK_OPT_AUTONEG; ++ else ++ cfg.options &= ~DPNI_LINK_OPT_AUTONEG; ++ if (cmd->duplex == DUPLEX_HALF) ++ cfg.options |= DPNI_LINK_OPT_HALF_DUPLEX; ++ else ++ cfg.options &= ~DPNI_LINK_OPT_HALF_DUPLEX; ++ ++ err = dpni_set_link_cfg(priv->mc_io, 0, priv->mc_token, &cfg); ++ if (err) ++ /* ethtool will be loud enough if we return an error; no point ++ * in putting our own error message on the console by default ++ */ ++ netdev_dbg(net_dev, "ERROR %d setting link cfg", err); ++ ++ return err; ++} ++ ++static void dpaa2_get_strings(struct net_device *netdev, u32 stringset, ++ u8 *data) ++{ ++ u8 *p = data; ++ int i; ++ ++ switch (stringset) { ++ case ETH_SS_STATS: ++ for (i = 0; i < DPAA2_ETH_NUM_STATS; i++) { ++ strlcpy(p, dpaa2_ethtool_stats[i], ETH_GSTRING_LEN); ++ p += ETH_GSTRING_LEN; ++ } ++ for (i = 0; i < DPAA2_ETH_NUM_EXTRA_STATS; i++) { ++ strlcpy(p, dpaa2_ethtool_extras[i], ETH_GSTRING_LEN); ++ p += ETH_GSTRING_LEN; ++ } ++ break; ++ } ++} ++ ++static int dpaa2_get_sset_count(struct net_device *net_dev, int sset) ++{ ++ switch (sset) { ++ case ETH_SS_STATS: /* ethtool_get_stats(), ethtool_get_drvinfo() */ ++ return DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS; ++ default: ++ return -EOPNOTSUPP; ++ } ++} ++ ++/** Fill in hardware counters, as returned by the MC firmware. ++ */ ++static void dpaa2_get_ethtool_stats(struct net_device *net_dev, ++ struct ethtool_stats *stats, ++ u64 *data) ++{ ++ int i; /* Current index in the data array */ ++ int j, k, err; ++ ++#ifdef CONFIG_FSL_QBMAN_DEBUG ++ u32 fcnt, bcnt; ++ u32 fcnt_rx_total = 0, fcnt_tx_total = 0; ++ u32 bcnt_rx_total = 0, bcnt_tx_total = 0; ++ u32 buf_cnt; ++#endif ++ u64 cdan = 0; ++ u64 portal_busy = 0; ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ struct dpaa2_eth_stats *extras; ++ struct dpaa2_eth_ch_stats *ch_stats; ++ ++ memset(data, 0, ++ sizeof(u64) * (DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS)); ++ ++ /* Print standard counters, from DPNI statistics */ ++ for (i = 0; i < DPAA2_ETH_NUM_STATS; i++) { ++ err = dpni_get_counter(priv->mc_io, 0, priv->mc_token, i, ++ data + i); ++ if (err != 0) ++ netdev_warn(net_dev, "Err %d getting DPNI counter %d", ++ err, i); ++ } ++ ++ /* Print per-cpu extra stats */ ++ for_each_online_cpu(k) { ++ extras = per_cpu_ptr(priv->percpu_extras, k); ++ for (j = 0; j < sizeof(*extras) / sizeof(__u64); j++) ++ *((__u64 *)data + i + j) += *((__u64 *)extras + j); ++ } ++ i += j; ++ ++ /* We may be using fewer DPIOs than actual CPUs */ ++ for_each_cpu(j, &priv->dpio_cpumask) { ++ ch_stats = &priv->channel[j]->stats; ++ cdan += ch_stats->cdan; ++ portal_busy += ch_stats->dequeue_portal_busy; ++ } ++ ++ *(data + i++) = portal_busy; ++ *(data + i++) = cdan; ++ ++#ifdef CONFIG_FSL_QBMAN_DEBUG ++ for (j = 0; j < priv->num_fqs; j++) { ++ /* Print FQ instantaneous counts */ ++ err = dpaa2_io_query_fq_count(NULL, priv->fq[j].fqid, ++ &fcnt, &bcnt); ++ if (err) { ++ netdev_warn(net_dev, "FQ query error %d", err); ++ return; ++ } ++ ++ if (priv->fq[j].type == DPAA2_TX_CONF_FQ) { ++ fcnt_tx_total += fcnt; ++ bcnt_tx_total += bcnt; ++ } else { ++ fcnt_rx_total += fcnt; ++ bcnt_rx_total += bcnt; ++ } ++ } ++ *(data + i++) = fcnt_rx_total; ++ *(data + i++) = bcnt_rx_total; ++ *(data + i++) = fcnt_tx_total; ++ *(data + i++) = bcnt_tx_total; ++ ++ err = dpaa2_io_query_bp_count(NULL, priv->dpbp_attrs.bpid, &buf_cnt); ++ if (err) { ++ netdev_warn(net_dev, "Buffer count query error %d\n", err); ++ return; ++ } ++ *(data + i++) = buf_cnt; ++#endif ++} ++ ++static const struct dpaa2_hash_fields { ++ u64 rxnfc_field; ++ enum net_prot cls_prot; ++ int cls_field; ++ int size; ++} dpaa2_hash_fields[] = { ++ { ++ /* L2 header */ ++ .rxnfc_field = RXH_L2DA, ++ .cls_prot = NET_PROT_ETH, ++ .cls_field = NH_FLD_ETH_DA, ++ .size = 6, ++ }, { ++ /* VLAN header */ ++ .rxnfc_field = RXH_VLAN, ++ .cls_prot = NET_PROT_VLAN, ++ .cls_field = NH_FLD_VLAN_TCI, ++ .size = 2, ++ }, { ++ /* IP header */ ++ .rxnfc_field = RXH_IP_SRC, ++ .cls_prot = NET_PROT_IP, ++ .cls_field = NH_FLD_IP_SRC, ++ .size = 4, ++ }, { ++ .rxnfc_field = RXH_IP_DST, ++ .cls_prot = NET_PROT_IP, ++ .cls_field = NH_FLD_IP_DST, ++ .size = 4, ++ }, { ++ .rxnfc_field = RXH_L3_PROTO, ++ .cls_prot = NET_PROT_IP, ++ .cls_field = NH_FLD_IP_PROTO, ++ .size = 1, ++ }, { ++ /* Using UDP ports, this is functionally equivalent to raw ++ * byte pairs from L4 header. ++ */ ++ .rxnfc_field = RXH_L4_B_0_1, ++ .cls_prot = NET_PROT_UDP, ++ .cls_field = NH_FLD_UDP_PORT_SRC, ++ .size = 2, ++ }, { ++ .rxnfc_field = RXH_L4_B_2_3, ++ .cls_prot = NET_PROT_UDP, ++ .cls_field = NH_FLD_UDP_PORT_DST, ++ .size = 2, ++ }, ++}; ++ ++static int dpaa2_cls_is_enabled(struct net_device *net_dev, u64 flag) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ ++ return !!(priv->rx_hash_fields & flag); ++} ++ ++static int dpaa2_cls_key_off(struct net_device *net_dev, u64 flag) ++{ ++ int i, off = 0; ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_hash_fields); i++) { ++ if (dpaa2_hash_fields[i].rxnfc_field & flag) ++ return off; ++ if (dpaa2_cls_is_enabled(net_dev, ++ dpaa2_hash_fields[i].rxnfc_field)) ++ off += dpaa2_hash_fields[i].size; ++ } ++ ++ return -1; ++} ++ ++static u8 dpaa2_cls_key_size(struct net_device *net_dev) ++{ ++ u8 i, size = 0; ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_hash_fields); i++) { ++ if (!dpaa2_cls_is_enabled(net_dev, ++ dpaa2_hash_fields[i].rxnfc_field)) ++ continue; ++ size += dpaa2_hash_fields[i].size; ++ } ++ ++ return size; ++} ++ ++static u8 dpaa2_cls_max_key_size(struct net_device *net_dev) ++{ ++ u8 i, size = 0; ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_hash_fields); i++) ++ size += dpaa2_hash_fields[i].size; ++ ++ return size; ++} ++ ++void dpaa2_cls_check(struct net_device *net_dev) ++{ ++ u8 key_size = dpaa2_cls_max_key_size(net_dev); ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ ++ if (priv->dpni_attrs.options & DPNI_OPT_DIST_FS && ++ priv->dpni_attrs.max_dist_key_size < key_size) { ++ dev_err(&net_dev->dev, ++ "max_dist_key_size = %d, expected %d. Steering is disabled\n", ++ priv->dpni_attrs.max_dist_key_size, ++ key_size); ++ priv->dpni_attrs.options &= ~DPNI_OPT_DIST_FS; ++ } ++} ++ ++/* Set RX hash options ++ * flags is a combination of RXH_ bits ++ */ ++int dpaa2_set_hash(struct net_device *net_dev, u64 flags) ++{ ++ struct device *dev = net_dev->dev.parent; ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ struct dpkg_profile_cfg cls_cfg; ++ struct dpni_rx_tc_dist_cfg dist_cfg; ++ u8 *dma_mem; ++ u64 enabled_flags = 0; ++ int i; ++ int err = 0; ++ ++ if (!dpaa2_eth_hash_enabled(priv)) { ++ dev_err(dev, "Hashing support is not enabled\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ if (flags & ~DPAA2_RXH_SUPPORTED) { ++ /* RXH_DISCARD is not supported */ ++ dev_err(dev, "unsupported option selected, supported options are: mvtsdfn\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ memset(&cls_cfg, 0, sizeof(cls_cfg)); ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_hash_fields); i++) { ++ struct dpkg_extract *key = ++ &cls_cfg.extracts[cls_cfg.num_extracts]; ++ ++ if (!(flags & dpaa2_hash_fields[i].rxnfc_field)) ++ continue; ++ ++ if (cls_cfg.num_extracts >= DPKG_MAX_NUM_OF_EXTRACTS) { ++ dev_err(dev, "error adding key extraction rule, too many rules?\n"); ++ return -E2BIG; ++ } ++ ++ key->type = DPKG_EXTRACT_FROM_HDR; ++ key->extract.from_hdr.prot = ++ dpaa2_hash_fields[i].cls_prot; ++ key->extract.from_hdr.type = DPKG_FULL_FIELD; ++ key->extract.from_hdr.field = ++ dpaa2_hash_fields[i].cls_field; ++ cls_cfg.num_extracts++; ++ ++ enabled_flags |= dpaa2_hash_fields[i].rxnfc_field; ++ } ++ ++ dma_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_DMA | GFP_KERNEL); ++ if (!dma_mem) ++ return -ENOMEM; ++ ++ err = dpni_prepare_key_cfg(&cls_cfg, dma_mem); ++ if (err) { ++ dev_err(dev, "dpni_prepare_key_cfg error %d", err); ++ return err; ++ } ++ ++ memset(&dist_cfg, 0, sizeof(dist_cfg)); ++ ++ /* Prepare for setting the rx dist */ ++ dist_cfg.key_cfg_iova = dma_map_single(net_dev->dev.parent, dma_mem, ++ DPAA2_CLASSIFIER_DMA_SIZE, ++ DMA_TO_DEVICE); ++ if (dma_mapping_error(net_dev->dev.parent, dist_cfg.key_cfg_iova)) { ++ dev_err(dev, "DMA mapping failed\n"); ++ kfree(dma_mem); ++ return -ENOMEM; ++ } ++ ++ dist_cfg.dist_size = dpaa2_queue_count(priv); ++ if (dpaa2_eth_fs_enabled(priv)) { ++ dist_cfg.dist_mode = DPNI_DIST_MODE_FS; ++ dist_cfg.fs_cfg.miss_action = DPNI_FS_MISS_HASH; ++ } else { ++ dist_cfg.dist_mode = DPNI_DIST_MODE_HASH; ++ } ++ ++ err = dpni_set_rx_tc_dist(priv->mc_io, 0, priv->mc_token, 0, &dist_cfg); ++ dma_unmap_single(net_dev->dev.parent, dist_cfg.key_cfg_iova, ++ DPAA2_CLASSIFIER_DMA_SIZE, DMA_TO_DEVICE); ++ kfree(dma_mem); ++ if (err) { ++ dev_err(dev, "dpni_set_rx_tc_dist() error %d\n", err); ++ return err; ++ } ++ ++ priv->rx_hash_fields = enabled_flags; ++ ++ return 0; ++} ++ ++static int dpaa2_cls_prep_rule(struct net_device *net_dev, ++ struct ethtool_rx_flow_spec *fs, ++ void *key) ++{ ++ struct ethtool_tcpip4_spec *l4ip4_h, *l4ip4_m; ++ struct ethhdr *eth_h, *eth_m; ++ struct ethtool_flow_ext *ext_h, *ext_m; ++ const u8 key_size = dpaa2_cls_key_size(net_dev); ++ void *msk = key + key_size; ++ ++ memset(key, 0, key_size * 2); ++ ++ /* This code is a major mess, it has to be cleaned up after the ++ * classification mask issue is fixed and key format will be made static ++ */ ++ ++ switch (fs->flow_type & 0xff) { ++ case TCP_V4_FLOW: ++ l4ip4_h = &fs->h_u.tcp_ip4_spec; ++ l4ip4_m = &fs->m_u.tcp_ip4_spec; ++ /* TODO: ethertype to match IPv4 and protocol to match TCP */ ++ goto l4ip4; ++ ++ case UDP_V4_FLOW: ++ l4ip4_h = &fs->h_u.udp_ip4_spec; ++ l4ip4_m = &fs->m_u.udp_ip4_spec; ++ goto l4ip4; ++ ++ case SCTP_V4_FLOW: ++ l4ip4_h = &fs->h_u.sctp_ip4_spec; ++ l4ip4_m = &fs->m_u.sctp_ip4_spec; ++ ++l4ip4: ++ if (l4ip4_m->tos) { ++ netdev_err(net_dev, ++ "ToS is not supported for IPv4 L4\n"); ++ return -EOPNOTSUPP; ++ } ++ if (l4ip4_m->ip4src && ++ !dpaa2_cls_is_enabled(net_dev, RXH_IP_SRC)) { ++ netdev_err(net_dev, "IP SRC not supported!\n"); ++ return -EOPNOTSUPP; ++ } ++ if (l4ip4_m->ip4dst && ++ !dpaa2_cls_is_enabled(net_dev, RXH_IP_DST)) { ++ netdev_err(net_dev, "IP DST not supported!\n"); ++ return -EOPNOTSUPP; ++ } ++ if (l4ip4_m->psrc && ++ !dpaa2_cls_is_enabled(net_dev, RXH_L4_B_0_1)) { ++ netdev_err(net_dev, "PSRC not supported, ignored\n"); ++ return -EOPNOTSUPP; ++ } ++ if (l4ip4_m->pdst && ++ !dpaa2_cls_is_enabled(net_dev, RXH_L4_B_2_3)) { ++ netdev_err(net_dev, "PDST not supported, ignored\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ if (dpaa2_cls_is_enabled(net_dev, RXH_IP_SRC)) { ++ *(u32 *)(key + dpaa2_cls_key_off(net_dev, RXH_IP_SRC)) ++ = l4ip4_h->ip4src; ++ *(u32 *)(msk + dpaa2_cls_key_off(net_dev, RXH_IP_SRC)) ++ = l4ip4_m->ip4src; ++ } ++ if (dpaa2_cls_is_enabled(net_dev, RXH_IP_DST)) { ++ *(u32 *)(key + dpaa2_cls_key_off(net_dev, RXH_IP_DST)) ++ = l4ip4_h->ip4dst; ++ *(u32 *)(msk + dpaa2_cls_key_off(net_dev, RXH_IP_DST)) ++ = l4ip4_m->ip4dst; ++ } ++ ++ if (dpaa2_cls_is_enabled(net_dev, RXH_L4_B_0_1)) { ++ *(u32 *)(key + dpaa2_cls_key_off(net_dev, RXH_L4_B_0_1)) ++ = l4ip4_h->psrc; ++ *(u32 *)(msk + dpaa2_cls_key_off(net_dev, RXH_L4_B_0_1)) ++ = l4ip4_m->psrc; ++ } ++ ++ if (dpaa2_cls_is_enabled(net_dev, RXH_L4_B_2_3)) { ++ *(u32 *)(key + dpaa2_cls_key_off(net_dev, RXH_L4_B_2_3)) ++ = l4ip4_h->pdst; ++ *(u32 *)(msk + dpaa2_cls_key_off(net_dev, RXH_L4_B_2_3)) ++ = l4ip4_m->pdst; ++ } ++ break; ++ ++ case ETHER_FLOW: ++ eth_h = &fs->h_u.ether_spec; ++ eth_m = &fs->m_u.ether_spec; ++ ++ if (eth_m->h_proto) { ++ netdev_err(net_dev, "Ethertype is not supported!\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ if (!is_zero_ether_addr(eth_m->h_source)) { ++ netdev_err(net_dev, "ETH SRC is not supported!\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ if (dpaa2_cls_is_enabled(net_dev, RXH_L2DA)) { ++ ether_addr_copy(key ++ + dpaa2_cls_key_off(net_dev, RXH_L2DA), ++ eth_h->h_dest); ++ ether_addr_copy(msk ++ + dpaa2_cls_key_off(net_dev, RXH_L2DA), ++ eth_m->h_dest); ++ } else { ++ if (!is_zero_ether_addr(eth_m->h_dest)) { ++ netdev_err(net_dev, ++ "ETH DST is not supported!\n"); ++ return -EOPNOTSUPP; ++ } ++ } ++ break; ++ ++ default: ++ /* TODO: IP user flow, AH, ESP */ ++ return -EOPNOTSUPP; ++ } ++ ++ if (fs->flow_type & FLOW_EXT) { ++ /* TODO: ETH data, VLAN ethertype, VLAN TCI .. */ ++ return -EOPNOTSUPP; ++ } ++ ++ if (fs->flow_type & FLOW_MAC_EXT) { ++ ext_h = &fs->h_ext; ++ ext_m = &fs->m_ext; ++ ++ if (dpaa2_cls_is_enabled(net_dev, RXH_L2DA)) { ++ ether_addr_copy(key ++ + dpaa2_cls_key_off(net_dev, RXH_L2DA), ++ ext_h->h_dest); ++ ether_addr_copy(msk ++ + dpaa2_cls_key_off(net_dev, RXH_L2DA), ++ ext_m->h_dest); ++ } else { ++ if (!is_zero_ether_addr(ext_m->h_dest)) { ++ netdev_err(net_dev, ++ "ETH DST is not supported!\n"); ++ return -EOPNOTSUPP; ++ } ++ } ++ } ++ return 0; ++} ++ ++static int dpaa2_do_cls(struct net_device *net_dev, ++ struct ethtool_rx_flow_spec *fs, ++ bool add) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ const int rule_cnt = DPAA2_CLASSIFIER_ENTRY_COUNT; ++ struct dpni_rule_cfg rule_cfg; ++ void *dma_mem; ++ int err = 0; ++ ++ if (!dpaa2_eth_fs_enabled(priv)) { ++ netdev_err(net_dev, "dev does not support steering!\n"); ++ /* dev doesn't support steering */ ++ return -EOPNOTSUPP; ++ } ++ ++ if ((fs->ring_cookie != RX_CLS_FLOW_DISC && ++ fs->ring_cookie >= dpaa2_queue_count(priv)) || ++ fs->location >= rule_cnt) ++ return -EINVAL; ++ ++ memset(&rule_cfg, 0, sizeof(rule_cfg)); ++ rule_cfg.key_size = dpaa2_cls_key_size(net_dev); ++ ++ /* allocate twice the key size, for the actual key and for mask */ ++ dma_mem = kzalloc(rule_cfg.key_size * 2, GFP_DMA | GFP_KERNEL); ++ if (!dma_mem) ++ return -ENOMEM; ++ ++ err = dpaa2_cls_prep_rule(net_dev, fs, dma_mem); ++ if (err) ++ goto err_free_mem; ++ ++ rule_cfg.key_iova = dma_map_single(net_dev->dev.parent, dma_mem, ++ rule_cfg.key_size * 2, ++ DMA_TO_DEVICE); ++ ++ rule_cfg.mask_iova = rule_cfg.key_iova + rule_cfg.key_size; ++ ++ if (!(priv->dpni_attrs.options & DPNI_OPT_FS_MASK_SUPPORT)) { ++ int i; ++ u8 *mask = dma_mem + rule_cfg.key_size; ++ ++ /* check that nothing is masked out, otherwise it won't work */ ++ for (i = 0; i < rule_cfg.key_size; i++) { ++ if (mask[i] == 0xff) ++ continue; ++ netdev_err(net_dev, "dev does not support masking!\n"); ++ err = -EOPNOTSUPP; ++ goto err_free_mem; ++ } ++ rule_cfg.mask_iova = 0; ++ } ++ ++ /* No way to control rule order in firmware */ ++ if (add) ++ err = dpni_add_fs_entry(priv->mc_io, 0, priv->mc_token, 0, ++ &rule_cfg, (u16)fs->ring_cookie); ++ else ++ err = dpni_remove_fs_entry(priv->mc_io, 0, priv->mc_token, 0, ++ &rule_cfg); ++ ++ dma_unmap_single(net_dev->dev.parent, rule_cfg.key_iova, ++ rule_cfg.key_size * 2, DMA_TO_DEVICE); ++ if (err) { ++ netdev_err(net_dev, "dpaa2_add_cls() error %d\n", err); ++ goto err_free_mem; ++ } ++ ++ priv->cls_rule[fs->location].fs = *fs; ++ priv->cls_rule[fs->location].in_use = true; ++ ++err_free_mem: ++ kfree(dma_mem); ++ ++ return err; ++} ++ ++static int dpaa2_add_cls(struct net_device *net_dev, ++ struct ethtool_rx_flow_spec *fs) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ int err; ++ ++ err = dpaa2_do_cls(net_dev, fs, true); ++ if (err) ++ return err; ++ ++ priv->cls_rule[fs->location].in_use = true; ++ priv->cls_rule[fs->location].fs = *fs; ++ ++ return 0; ++} ++ ++static int dpaa2_del_cls(struct net_device *net_dev, int location) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ int err; ++ ++ err = dpaa2_do_cls(net_dev, &priv->cls_rule[location].fs, false); ++ if (err) ++ return err; ++ ++ priv->cls_rule[location].in_use = false; ++ ++ return 0; ++} ++ ++static void dpaa2_clear_cls(struct net_device *net_dev) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ int i, err; ++ ++ for (i = 0; i < DPAA2_CLASSIFIER_ENTRY_COUNT; i++) { ++ if (!priv->cls_rule[i].in_use) ++ continue; ++ ++ err = dpaa2_del_cls(net_dev, i); ++ if (err) ++ netdev_warn(net_dev, ++ "err trying to delete classification entry %d\n", ++ i); ++ } ++} ++ ++static int dpaa2_set_rxnfc(struct net_device *net_dev, ++ struct ethtool_rxnfc *rxnfc) ++{ ++ int err = 0; ++ ++ switch (rxnfc->cmd) { ++ case ETHTOOL_SRXFH: ++ /* first off clear ALL classification rules, chaging key ++ * composition will break them anyway ++ */ ++ dpaa2_clear_cls(net_dev); ++ /* we purposely ignore cmd->flow_type for now, because the ++ * classifier only supports a single set of fields for all ++ * protocols ++ */ ++ err = dpaa2_set_hash(net_dev, rxnfc->data); ++ break; ++ case ETHTOOL_SRXCLSRLINS: ++ err = dpaa2_add_cls(net_dev, &rxnfc->fs); ++ break; ++ ++ case ETHTOOL_SRXCLSRLDEL: ++ err = dpaa2_del_cls(net_dev, rxnfc->fs.location); ++ break; ++ ++ default: ++ err = -EOPNOTSUPP; ++ } ++ ++ return err; ++} ++ ++static int dpaa2_get_rxnfc(struct net_device *net_dev, ++ struct ethtool_rxnfc *rxnfc, u32 *rule_locs) ++{ ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ const int rule_cnt = DPAA2_CLASSIFIER_ENTRY_COUNT; ++ int i, j; ++ ++ switch (rxnfc->cmd) { ++ case ETHTOOL_GRXFH: ++ /* we purposely ignore cmd->flow_type for now, because the ++ * classifier only supports a single set of fields for all ++ * protocols ++ */ ++ rxnfc->data = priv->rx_hash_fields; ++ break; ++ ++ case ETHTOOL_GRXRINGS: ++ rxnfc->data = dpaa2_queue_count(priv); ++ break; ++ ++ case ETHTOOL_GRXCLSRLCNT: ++ for (i = 0, rxnfc->rule_cnt = 0; i < rule_cnt; i++) ++ if (priv->cls_rule[i].in_use) ++ rxnfc->rule_cnt++; ++ rxnfc->data = rule_cnt; ++ break; ++ ++ case ETHTOOL_GRXCLSRULE: ++ if (!priv->cls_rule[rxnfc->fs.location].in_use) ++ return -EINVAL; ++ ++ rxnfc->fs = priv->cls_rule[rxnfc->fs.location].fs; ++ break; ++ ++ case ETHTOOL_GRXCLSRLALL: ++ for (i = 0, j = 0; i < rule_cnt; i++) { ++ if (!priv->cls_rule[i].in_use) ++ continue; ++ if (j == rxnfc->rule_cnt) ++ return -EMSGSIZE; ++ rule_locs[j++] = i; ++ } ++ rxnfc->rule_cnt = j; ++ rxnfc->data = rule_cnt; ++ break; ++ ++ default: ++ return -EOPNOTSUPP; ++ } ++ ++ return 0; ++} ++ ++const struct ethtool_ops dpaa2_ethtool_ops = { ++ .get_drvinfo = dpaa2_get_drvinfo, ++ .get_msglevel = dpaa2_get_msglevel, ++ .set_msglevel = dpaa2_set_msglevel, ++ .get_link = ethtool_op_get_link, ++ .get_settings = dpaa2_get_settings, ++ .set_settings = dpaa2_set_settings, ++ .get_sset_count = dpaa2_get_sset_count, ++ .get_ethtool_stats = dpaa2_get_ethtool_stats, ++ .get_strings = dpaa2_get_strings, ++ .get_rxnfc = dpaa2_get_rxnfc, ++ .set_rxnfc = dpaa2_set_rxnfc, ++}; +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpkg.h +@@ -0,0 +1,175 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPKG_H_ ++#define __FSL_DPKG_H_ ++ ++#include ++#include "../../fsl-mc/include/net.h" ++ ++/* Data Path Key Generator API ++ * Contains initialization APIs and runtime APIs for the Key Generator ++ */ ++ ++/** Key Generator properties */ ++ ++/** ++ * Number of masks per key extraction ++ */ ++#define DPKG_NUM_OF_MASKS 4 ++/** ++ * Number of extractions per key profile ++ */ ++#define DPKG_MAX_NUM_OF_EXTRACTS 10 ++ ++/** ++ * enum dpkg_extract_from_hdr_type - Selecting extraction by header types ++ * @DPKG_FROM_HDR: Extract selected bytes from header, by offset ++ * @DPKG_FROM_FIELD: Extract selected bytes from header, by offset from field ++ * @DPKG_FULL_FIELD: Extract a full field ++ */ ++enum dpkg_extract_from_hdr_type { ++ DPKG_FROM_HDR = 0, ++ DPKG_FROM_FIELD = 1, ++ DPKG_FULL_FIELD = 2 ++}; ++ ++/** ++ * enum dpkg_extract_type - Enumeration for selecting extraction type ++ * @DPKG_EXTRACT_FROM_HDR: Extract from the header ++ * @DPKG_EXTRACT_FROM_DATA: Extract from data not in specific header ++ * @DPKG_EXTRACT_FROM_PARSE: Extract from parser-result; ++ * e.g. can be used to extract header existence; ++ * please refer to 'Parse Result definition' section in the parser BG ++ */ ++enum dpkg_extract_type { ++ DPKG_EXTRACT_FROM_HDR = 0, ++ DPKG_EXTRACT_FROM_DATA = 1, ++ DPKG_EXTRACT_FROM_PARSE = 3 ++}; ++ ++/** ++ * struct dpkg_mask - A structure for defining a single extraction mask ++ * @mask: Byte mask for the extracted content ++ * @offset: Offset within the extracted content ++ */ ++struct dpkg_mask { ++ uint8_t mask; ++ uint8_t offset; ++}; ++ ++/** ++ * struct dpkg_extract - A structure for defining a single extraction ++ * @type: Determines how the union below is interpreted: ++ * DPKG_EXTRACT_FROM_HDR: selects 'from_hdr'; ++ * DPKG_EXTRACT_FROM_DATA: selects 'from_data'; ++ * DPKG_EXTRACT_FROM_PARSE: selects 'from_parse' ++ * @extract: Selects extraction method ++ * @num_of_byte_masks: Defines the number of valid entries in the array below; ++ * This is also the number of bytes to be used as masks ++ * @masks: Masks parameters ++ */ ++struct dpkg_extract { ++ enum dpkg_extract_type type; ++ /** ++ * union extract - Selects extraction method ++ * @from_hdr - Used when 'type = DPKG_EXTRACT_FROM_HDR' ++ * @from_data - Used when 'type = DPKG_EXTRACT_FROM_DATA' ++ * @from_parse - Used when 'type = DPKG_EXTRACT_FROM_PARSE' ++ */ ++ union { ++ /** ++ * struct from_hdr - Used when 'type = DPKG_EXTRACT_FROM_HDR' ++ * @prot: Any of the supported headers ++ * @type: Defines the type of header extraction: ++ * DPKG_FROM_HDR: use size & offset below; ++ * DPKG_FROM_FIELD: use field, size and offset below; ++ * DPKG_FULL_FIELD: use field below ++ * @field: One of the supported fields (NH_FLD_) ++ * ++ * @size: Size in bytes ++ * @offset: Byte offset ++ * @hdr_index: Clear for cases not listed below; ++ * Used for protocols that may have more than a single ++ * header, 0 indicates an outer header; ++ * Supported protocols (possible values): ++ * NET_PROT_VLAN (0, HDR_INDEX_LAST); ++ * NET_PROT_MPLS (0, 1, HDR_INDEX_LAST); ++ * NET_PROT_IP(0, HDR_INDEX_LAST); ++ * NET_PROT_IPv4(0, HDR_INDEX_LAST); ++ * NET_PROT_IPv6(0, HDR_INDEX_LAST); ++ */ ++ ++ struct { ++ enum net_prot prot; ++ enum dpkg_extract_from_hdr_type type; ++ uint32_t field; ++ uint8_t size; ++ uint8_t offset; ++ uint8_t hdr_index; ++ } from_hdr; ++ /** ++ * struct from_data - Used when 'type = DPKG_EXTRACT_FROM_DATA' ++ * @size: Size in bytes ++ * @offset: Byte offset ++ */ ++ struct { ++ uint8_t size; ++ uint8_t offset; ++ } from_data; ++ ++ /** ++ * struct from_parse - Used when 'type = DPKG_EXTRACT_FROM_PARSE' ++ * @size: Size in bytes ++ * @offset: Byte offset ++ */ ++ struct { ++ uint8_t size; ++ uint8_t offset; ++ } from_parse; ++ } extract; ++ ++ uint8_t num_of_byte_masks; ++ struct dpkg_mask masks[DPKG_NUM_OF_MASKS]; ++}; ++ ++/** ++ * struct dpkg_profile_cfg - A structure for defining a full Key Generation ++ * profile (rule) ++ * @num_extracts: Defines the number of valid entries in the array below ++ * @extracts: Array of required extractions ++ */ ++struct dpkg_profile_cfg { ++ uint8_t num_extracts; ++ struct dpkg_extract extracts[DPKG_MAX_NUM_OF_EXTRACTS]; ++}; ++ ++#endif /* __FSL_DPKG_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpni-cmd.h +@@ -0,0 +1,1058 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef _FSL_DPNI_CMD_H ++#define _FSL_DPNI_CMD_H ++ ++/* DPNI Version */ ++#define DPNI_VER_MAJOR 6 ++#define DPNI_VER_MINOR 0 ++ ++/* Command IDs */ ++#define DPNI_CMDID_OPEN 0x801 ++#define DPNI_CMDID_CLOSE 0x800 ++#define DPNI_CMDID_CREATE 0x901 ++#define DPNI_CMDID_DESTROY 0x900 ++ ++#define DPNI_CMDID_ENABLE 0x002 ++#define DPNI_CMDID_DISABLE 0x003 ++#define DPNI_CMDID_GET_ATTR 0x004 ++#define DPNI_CMDID_RESET 0x005 ++#define DPNI_CMDID_IS_ENABLED 0x006 ++ ++#define DPNI_CMDID_SET_IRQ 0x010 ++#define DPNI_CMDID_GET_IRQ 0x011 ++#define DPNI_CMDID_SET_IRQ_ENABLE 0x012 ++#define DPNI_CMDID_GET_IRQ_ENABLE 0x013 ++#define DPNI_CMDID_SET_IRQ_MASK 0x014 ++#define DPNI_CMDID_GET_IRQ_MASK 0x015 ++#define DPNI_CMDID_GET_IRQ_STATUS 0x016 ++#define DPNI_CMDID_CLEAR_IRQ_STATUS 0x017 ++ ++#define DPNI_CMDID_SET_POOLS 0x200 ++#define DPNI_CMDID_GET_RX_BUFFER_LAYOUT 0x201 ++#define DPNI_CMDID_SET_RX_BUFFER_LAYOUT 0x202 ++#define DPNI_CMDID_GET_TX_BUFFER_LAYOUT 0x203 ++#define DPNI_CMDID_SET_TX_BUFFER_LAYOUT 0x204 ++#define DPNI_CMDID_SET_TX_CONF_BUFFER_LAYOUT 0x205 ++#define DPNI_CMDID_GET_TX_CONF_BUFFER_LAYOUT 0x206 ++#define DPNI_CMDID_SET_L3_CHKSUM_VALIDATION 0x207 ++#define DPNI_CMDID_GET_L3_CHKSUM_VALIDATION 0x208 ++#define DPNI_CMDID_SET_L4_CHKSUM_VALIDATION 0x209 ++#define DPNI_CMDID_GET_L4_CHKSUM_VALIDATION 0x20A ++#define DPNI_CMDID_SET_ERRORS_BEHAVIOR 0x20B ++#define DPNI_CMDID_SET_TX_CONF_REVOKE 0x20C ++ ++#define DPNI_CMDID_GET_QDID 0x210 ++#define DPNI_CMDID_GET_SP_INFO 0x211 ++#define DPNI_CMDID_GET_TX_DATA_OFFSET 0x212 ++#define DPNI_CMDID_GET_COUNTER 0x213 ++#define DPNI_CMDID_SET_COUNTER 0x214 ++#define DPNI_CMDID_GET_LINK_STATE 0x215 ++#define DPNI_CMDID_SET_MAX_FRAME_LENGTH 0x216 ++#define DPNI_CMDID_GET_MAX_FRAME_LENGTH 0x217 ++#define DPNI_CMDID_SET_MTU 0x218 ++#define DPNI_CMDID_GET_MTU 0x219 ++#define DPNI_CMDID_SET_LINK_CFG 0x21A ++#define DPNI_CMDID_SET_TX_SHAPING 0x21B ++ ++#define DPNI_CMDID_SET_MCAST_PROMISC 0x220 ++#define DPNI_CMDID_GET_MCAST_PROMISC 0x221 ++#define DPNI_CMDID_SET_UNICAST_PROMISC 0x222 ++#define DPNI_CMDID_GET_UNICAST_PROMISC 0x223 ++#define DPNI_CMDID_SET_PRIM_MAC 0x224 ++#define DPNI_CMDID_GET_PRIM_MAC 0x225 ++#define DPNI_CMDID_ADD_MAC_ADDR 0x226 ++#define DPNI_CMDID_REMOVE_MAC_ADDR 0x227 ++#define DPNI_CMDID_CLR_MAC_FILTERS 0x228 ++ ++#define DPNI_CMDID_SET_VLAN_FILTERS 0x230 ++#define DPNI_CMDID_ADD_VLAN_ID 0x231 ++#define DPNI_CMDID_REMOVE_VLAN_ID 0x232 ++#define DPNI_CMDID_CLR_VLAN_FILTERS 0x233 ++ ++#define DPNI_CMDID_SET_RX_TC_DIST 0x235 ++#define DPNI_CMDID_SET_TX_FLOW 0x236 ++#define DPNI_CMDID_GET_TX_FLOW 0x237 ++#define DPNI_CMDID_SET_RX_FLOW 0x238 ++#define DPNI_CMDID_GET_RX_FLOW 0x239 ++#define DPNI_CMDID_SET_RX_ERR_QUEUE 0x23A ++#define DPNI_CMDID_GET_RX_ERR_QUEUE 0x23B ++ ++#define DPNI_CMDID_SET_RX_TC_POLICING 0x23E ++#define DPNI_CMDID_SET_RX_TC_EARLY_DROP 0x23F ++ ++#define DPNI_CMDID_SET_QOS_TBL 0x240 ++#define DPNI_CMDID_ADD_QOS_ENT 0x241 ++#define DPNI_CMDID_REMOVE_QOS_ENT 0x242 ++#define DPNI_CMDID_CLR_QOS_TBL 0x243 ++#define DPNI_CMDID_ADD_FS_ENT 0x244 ++#define DPNI_CMDID_REMOVE_FS_ENT 0x245 ++#define DPNI_CMDID_CLR_FS_ENT 0x246 ++#define DPNI_CMDID_SET_VLAN_INSERTION 0x247 ++#define DPNI_CMDID_SET_VLAN_REMOVAL 0x248 ++#define DPNI_CMDID_SET_IPR 0x249 ++#define DPNI_CMDID_SET_IPF 0x24A ++ ++#define DPNI_CMDID_SET_TX_SELECTION 0x250 ++#define DPNI_CMDID_GET_RX_TC_POLICING 0x251 ++#define DPNI_CMDID_GET_RX_TC_EARLY_DROP 0x252 ++#define DPNI_CMDID_SET_RX_TC_CONGESTION_NOTIFICATION 0x253 ++#define DPNI_CMDID_GET_RX_TC_CONGESTION_NOTIFICATION 0x254 ++#define DPNI_CMDID_SET_TX_TC_CONGESTION_NOTIFICATION 0x255 ++#define DPNI_CMDID_GET_TX_TC_CONGESTION_NOTIFICATION 0x256 ++#define DPNI_CMDID_SET_TX_CONF 0x257 ++#define DPNI_CMDID_GET_TX_CONF 0x258 ++#define DPNI_CMDID_SET_TX_CONF_CONGESTION_NOTIFICATION 0x259 ++#define DPNI_CMDID_GET_TX_CONF_CONGESTION_NOTIFICATION 0x25A ++#define DPNI_CMDID_SET_TX_TC_EARLY_DROP 0x25B ++#define DPNI_CMDID_GET_TX_TC_EARLY_DROP 0x25C ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_OPEN(cmd, dpni_id) \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, dpni_id) ++ ++#define DPNI_PREP_EXTENDED_CFG(ext, cfg) \ ++do { \ ++ MC_PREP_OP(ext, 0, 0, 16, uint16_t, cfg->tc_cfg[0].max_dist); \ ++ MC_PREP_OP(ext, 0, 16, 16, uint16_t, cfg->tc_cfg[0].max_fs_entries); \ ++ MC_PREP_OP(ext, 0, 32, 16, uint16_t, cfg->tc_cfg[1].max_dist); \ ++ MC_PREP_OP(ext, 0, 48, 16, uint16_t, cfg->tc_cfg[1].max_fs_entries); \ ++ MC_PREP_OP(ext, 1, 0, 16, uint16_t, cfg->tc_cfg[2].max_dist); \ ++ MC_PREP_OP(ext, 1, 16, 16, uint16_t, cfg->tc_cfg[2].max_fs_entries); \ ++ MC_PREP_OP(ext, 1, 32, 16, uint16_t, cfg->tc_cfg[3].max_dist); \ ++ MC_PREP_OP(ext, 1, 48, 16, uint16_t, cfg->tc_cfg[3].max_fs_entries); \ ++ MC_PREP_OP(ext, 2, 0, 16, uint16_t, cfg->tc_cfg[4].max_dist); \ ++ MC_PREP_OP(ext, 2, 16, 16, uint16_t, cfg->tc_cfg[4].max_fs_entries); \ ++ MC_PREP_OP(ext, 2, 32, 16, uint16_t, cfg->tc_cfg[5].max_dist); \ ++ MC_PREP_OP(ext, 2, 48, 16, uint16_t, cfg->tc_cfg[5].max_fs_entries); \ ++ MC_PREP_OP(ext, 3, 0, 16, uint16_t, cfg->tc_cfg[6].max_dist); \ ++ MC_PREP_OP(ext, 3, 16, 16, uint16_t, cfg->tc_cfg[6].max_fs_entries); \ ++ MC_PREP_OP(ext, 3, 32, 16, uint16_t, cfg->tc_cfg[7].max_dist); \ ++ MC_PREP_OP(ext, 3, 48, 16, uint16_t, cfg->tc_cfg[7].max_fs_entries); \ ++ MC_PREP_OP(ext, 4, 0, 16, uint16_t, \ ++ cfg->ipr_cfg.max_open_frames_ipv4); \ ++ MC_PREP_OP(ext, 4, 16, 16, uint16_t, \ ++ cfg->ipr_cfg.max_open_frames_ipv6); \ ++ MC_PREP_OP(ext, 4, 32, 16, uint16_t, \ ++ cfg->ipr_cfg.max_reass_frm_size); \ ++ MC_PREP_OP(ext, 5, 0, 16, uint16_t, \ ++ cfg->ipr_cfg.min_frag_size_ipv4); \ ++ MC_PREP_OP(ext, 5, 16, 16, uint16_t, \ ++ cfg->ipr_cfg.min_frag_size_ipv6); \ ++} while (0) ++ ++#define DPNI_EXT_EXTENDED_CFG(ext, cfg) \ ++do { \ ++ MC_EXT_OP(ext, 0, 0, 16, uint16_t, cfg->tc_cfg[0].max_dist); \ ++ MC_EXT_OP(ext, 0, 16, 16, uint16_t, cfg->tc_cfg[0].max_fs_entries); \ ++ MC_EXT_OP(ext, 0, 32, 16, uint16_t, cfg->tc_cfg[1].max_dist); \ ++ MC_EXT_OP(ext, 0, 48, 16, uint16_t, cfg->tc_cfg[1].max_fs_entries); \ ++ MC_EXT_OP(ext, 1, 0, 16, uint16_t, cfg->tc_cfg[2].max_dist); \ ++ MC_EXT_OP(ext, 1, 16, 16, uint16_t, cfg->tc_cfg[2].max_fs_entries); \ ++ MC_EXT_OP(ext, 1, 32, 16, uint16_t, cfg->tc_cfg[3].max_dist); \ ++ MC_EXT_OP(ext, 1, 48, 16, uint16_t, cfg->tc_cfg[3].max_fs_entries); \ ++ MC_EXT_OP(ext, 2, 0, 16, uint16_t, cfg->tc_cfg[4].max_dist); \ ++ MC_EXT_OP(ext, 2, 16, 16, uint16_t, cfg->tc_cfg[4].max_fs_entries); \ ++ MC_EXT_OP(ext, 2, 32, 16, uint16_t, cfg->tc_cfg[5].max_dist); \ ++ MC_EXT_OP(ext, 2, 48, 16, uint16_t, cfg->tc_cfg[5].max_fs_entries); \ ++ MC_EXT_OP(ext, 3, 0, 16, uint16_t, cfg->tc_cfg[6].max_dist); \ ++ MC_EXT_OP(ext, 3, 16, 16, uint16_t, cfg->tc_cfg[6].max_fs_entries); \ ++ MC_EXT_OP(ext, 3, 32, 16, uint16_t, cfg->tc_cfg[7].max_dist); \ ++ MC_EXT_OP(ext, 3, 48, 16, uint16_t, cfg->tc_cfg[7].max_fs_entries); \ ++ MC_EXT_OP(ext, 4, 0, 16, uint16_t, \ ++ cfg->ipr_cfg.max_open_frames_ipv4); \ ++ MC_EXT_OP(ext, 4, 16, 16, uint16_t, \ ++ cfg->ipr_cfg.max_open_frames_ipv6); \ ++ MC_EXT_OP(ext, 4, 32, 16, uint16_t, \ ++ cfg->ipr_cfg.max_reass_frm_size); \ ++ MC_EXT_OP(ext, 5, 0, 16, uint16_t, \ ++ cfg->ipr_cfg.min_frag_size_ipv4); \ ++ MC_EXT_OP(ext, 5, 16, 16, uint16_t, \ ++ cfg->ipr_cfg.min_frag_size_ipv6); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_CREATE(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->adv.max_tcs); \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, cfg->adv.max_senders); \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->mac_addr[5]); \ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->mac_addr[4]); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->mac_addr[3]); \ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, cfg->mac_addr[2]); \ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, cfg->mac_addr[1]); \ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, cfg->mac_addr[0]); \ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->adv.options); \ ++ MC_CMD_OP(cmd, 2, 0, 8, uint8_t, cfg->adv.max_unicast_filters); \ ++ MC_CMD_OP(cmd, 2, 8, 8, uint8_t, cfg->adv.max_multicast_filters); \ ++ MC_CMD_OP(cmd, 2, 16, 8, uint8_t, cfg->adv.max_vlan_filters); \ ++ MC_CMD_OP(cmd, 2, 24, 8, uint8_t, cfg->adv.max_qos_entries); \ ++ MC_CMD_OP(cmd, 2, 32, 8, uint8_t, cfg->adv.max_qos_key_size); \ ++ MC_CMD_OP(cmd, 2, 48, 8, uint8_t, cfg->adv.max_dist_key_size); \ ++ MC_CMD_OP(cmd, 2, 56, 8, enum net_prot, cfg->adv.start_hdr); \ ++ MC_CMD_OP(cmd, 4, 48, 8, uint8_t, cfg->adv.max_policers); \ ++ MC_CMD_OP(cmd, 4, 56, 8, uint8_t, cfg->adv.max_congestion_ctrl); \ ++ MC_CMD_OP(cmd, 5, 0, 64, uint64_t, cfg->adv.ext_cfg_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_POOLS(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->num_dpbp); \ ++ MC_CMD_OP(cmd, 0, 8, 1, int, cfg->pools[0].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 9, 1, int, cfg->pools[1].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 10, 1, int, cfg->pools[2].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 11, 1, int, cfg->pools[3].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 12, 1, int, cfg->pools[4].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 13, 1, int, cfg->pools[5].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 14, 1, int, cfg->pools[6].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 15, 1, int, cfg->pools[7].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 32, 32, int, cfg->pools[0].dpbp_id); \ ++ MC_CMD_OP(cmd, 4, 32, 16, uint16_t, cfg->pools[0].buffer_size);\ ++ MC_CMD_OP(cmd, 1, 0, 32, int, cfg->pools[1].dpbp_id); \ ++ MC_CMD_OP(cmd, 4, 48, 16, uint16_t, cfg->pools[1].buffer_size);\ ++ MC_CMD_OP(cmd, 1, 32, 32, int, cfg->pools[2].dpbp_id); \ ++ MC_CMD_OP(cmd, 5, 0, 16, uint16_t, cfg->pools[2].buffer_size);\ ++ MC_CMD_OP(cmd, 2, 0, 32, int, cfg->pools[3].dpbp_id); \ ++ MC_CMD_OP(cmd, 5, 16, 16, uint16_t, cfg->pools[3].buffer_size);\ ++ MC_CMD_OP(cmd, 2, 32, 32, int, cfg->pools[4].dpbp_id); \ ++ MC_CMD_OP(cmd, 5, 32, 16, uint16_t, cfg->pools[4].buffer_size);\ ++ MC_CMD_OP(cmd, 3, 0, 32, int, cfg->pools[5].dpbp_id); \ ++ MC_CMD_OP(cmd, 5, 48, 16, uint16_t, cfg->pools[5].buffer_size);\ ++ MC_CMD_OP(cmd, 3, 32, 32, int, cfg->pools[6].dpbp_id); \ ++ MC_CMD_OP(cmd, 6, 0, 16, uint16_t, cfg->pools[6].buffer_size);\ ++ MC_CMD_OP(cmd, 4, 0, 32, int, cfg->pools[7].dpbp_id); \ ++ MC_CMD_OP(cmd, 6, 16, 16, uint16_t, cfg->pools[7].buffer_size);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_IS_ENABLED(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_IRQ(cmd, irq_index, irq_cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr); \ ++ MC_CMD_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_IRQ(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_IRQ(cmd, type, irq_cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val); \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr); \ ++ MC_RSP_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, type); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_IRQ_ENABLE(cmd, irq_index, en) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, en); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_IRQ_ENABLE(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_IRQ_ENABLE(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_IRQ_MASK(cmd, irq_index, mask) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, mask); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_IRQ_MASK(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_IRQ_MASK(cmd, mask) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mask) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_IRQ_STATUS(cmd, status) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, status) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_ATTR(cmd, attr) \ ++ MC_CMD_OP(cmd, 6, 0, 64, uint64_t, attr->ext_cfg_iova) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, int, attr->id);\ ++ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->max_tcs); \ ++ MC_RSP_OP(cmd, 0, 40, 8, uint8_t, attr->max_senders); \ ++ MC_RSP_OP(cmd, 0, 48, 8, enum net_prot, attr->start_hdr); \ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, attr->options); \ ++ MC_RSP_OP(cmd, 2, 0, 8, uint8_t, attr->max_unicast_filters); \ ++ MC_RSP_OP(cmd, 2, 8, 8, uint8_t, attr->max_multicast_filters);\ ++ MC_RSP_OP(cmd, 2, 16, 8, uint8_t, attr->max_vlan_filters); \ ++ MC_RSP_OP(cmd, 2, 24, 8, uint8_t, attr->max_qos_entries); \ ++ MC_RSP_OP(cmd, 2, 32, 8, uint8_t, attr->max_qos_key_size); \ ++ MC_RSP_OP(cmd, 2, 40, 8, uint8_t, attr->max_dist_key_size); \ ++ MC_RSP_OP(cmd, 4, 48, 8, uint8_t, attr->max_policers); \ ++ MC_RSP_OP(cmd, 4, 56, 8, uint8_t, attr->max_congestion_ctrl); \ ++ MC_RSP_OP(cmd, 5, 32, 16, uint16_t, attr->version.major);\ ++ MC_RSP_OP(cmd, 5, 48, 16, uint16_t, attr->version.minor);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_ERRORS_BEHAVIOR(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, cfg->errors); \ ++ MC_CMD_OP(cmd, 0, 32, 4, enum dpni_error_action, cfg->error_action); \ ++ MC_CMD_OP(cmd, 0, 36, 1, int, cfg->set_frame_annotation); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_RX_BUFFER_LAYOUT(cmd, layout) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ ++ MC_RSP_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ ++ MC_RSP_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ ++ MC_RSP_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ ++ MC_RSP_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ ++ MC_RSP_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_RX_BUFFER_LAYOUT(cmd, layout) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, layout->options); \ ++ MC_CMD_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ ++ MC_CMD_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ ++ MC_CMD_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ ++ MC_CMD_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ ++ MC_CMD_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_TX_BUFFER_LAYOUT(cmd, layout) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ ++ MC_RSP_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ ++ MC_RSP_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ ++ MC_RSP_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ ++ MC_RSP_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ ++ MC_RSP_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_TX_BUFFER_LAYOUT(cmd, layout) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, layout->options); \ ++ MC_CMD_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ ++ MC_CMD_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ ++ MC_CMD_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ ++ MC_CMD_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ ++ MC_CMD_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_TX_CONF_BUFFER_LAYOUT(cmd, layout) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ ++ MC_RSP_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ ++ MC_RSP_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ ++ MC_RSP_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ ++ MC_RSP_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ ++ MC_RSP_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_TX_CONF_BUFFER_LAYOUT(cmd, layout) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, layout->options); \ ++ MC_CMD_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ ++ MC_CMD_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ ++ MC_CMD_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ ++ MC_CMD_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ ++ MC_CMD_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_L3_CHKSUM_VALIDATION(cmd, en) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_L3_CHKSUM_VALIDATION(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_L4_CHKSUM_VALIDATION(cmd, en) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_L4_CHKSUM_VALIDATION(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_QDID(cmd, qdid) \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, qdid) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_SP_INFO(cmd, sp_info) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, sp_info->spids[0]); \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, sp_info->spids[1]); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_TX_DATA_OFFSET(cmd, data_offset) \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, data_offset) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_COUNTER(cmd, counter) \ ++ MC_CMD_OP(cmd, 0, 0, 16, enum dpni_counter, counter) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_COUNTER(cmd, value) \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, value) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_COUNTER(cmd, counter, value) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, enum dpni_counter, counter); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, value); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_LINK_CFG(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->rate);\ ++ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->options);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_LINK_STATE(cmd, state) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 32, 1, int, state->up);\ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, state->rate);\ ++ MC_RSP_OP(cmd, 2, 0, 64, uint64_t, state->options);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_TX_SHAPING(cmd, tx_shaper) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, tx_shaper->max_burst_size);\ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, tx_shaper->rate_limit);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_MAX_FRAME_LENGTH(cmd, max_frame_length) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, max_frame_length) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_MAX_FRAME_LENGTH(cmd, max_frame_length) \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, max_frame_length) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_MTU(cmd, mtu) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, mtu) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_MTU(cmd, mtu) \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, mtu) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_MULTICAST_PROMISC(cmd, en) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_MULTICAST_PROMISC(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_UNICAST_PROMISC(cmd, en) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_UNICAST_PROMISC(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_PRIMARY_MAC_ADDR(cmd, mac_addr) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, mac_addr[5]); \ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, mac_addr[4]); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, mac_addr[3]); \ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, mac_addr[2]); \ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, mac_addr[1]); \ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, mac_addr[0]); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_PRIMARY_MAC_ADDR(cmd, mac_addr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 16, 8, uint8_t, mac_addr[5]); \ ++ MC_RSP_OP(cmd, 0, 24, 8, uint8_t, mac_addr[4]); \ ++ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, mac_addr[3]); \ ++ MC_RSP_OP(cmd, 0, 40, 8, uint8_t, mac_addr[2]); \ ++ MC_RSP_OP(cmd, 0, 48, 8, uint8_t, mac_addr[1]); \ ++ MC_RSP_OP(cmd, 0, 56, 8, uint8_t, mac_addr[0]); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_ADD_MAC_ADDR(cmd, mac_addr) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, mac_addr[5]); \ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, mac_addr[4]); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, mac_addr[3]); \ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, mac_addr[2]); \ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, mac_addr[1]); \ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, mac_addr[0]); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_REMOVE_MAC_ADDR(cmd, mac_addr) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, mac_addr[5]); \ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, mac_addr[4]); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, mac_addr[3]); \ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, mac_addr[2]); \ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, mac_addr[1]); \ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, mac_addr[0]); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_CLEAR_MAC_FILTERS(cmd, unicast, multicast) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, unicast); \ ++ MC_CMD_OP(cmd, 0, 1, 1, int, multicast); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_VLAN_FILTERS(cmd, en) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_ADD_VLAN_ID(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 32, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_REMOVE_VLAN_ID(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 32, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_TX_SELECTION(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, cfg->tc_sched[0].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 0, 16, 4, enum dpni_tx_schedule_mode, \ ++ cfg->tc_sched[0].mode); \ ++ MC_CMD_OP(cmd, 0, 32, 16, uint16_t, cfg->tc_sched[1].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 0, 48, 4, enum dpni_tx_schedule_mode, \ ++ cfg->tc_sched[1].mode); \ ++ MC_CMD_OP(cmd, 1, 0, 16, uint16_t, cfg->tc_sched[2].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 1, 16, 4, enum dpni_tx_schedule_mode, \ ++ cfg->tc_sched[2].mode); \ ++ MC_CMD_OP(cmd, 1, 32, 16, uint16_t, cfg->tc_sched[3].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 1, 48, 4, enum dpni_tx_schedule_mode, \ ++ cfg->tc_sched[3].mode); \ ++ MC_CMD_OP(cmd, 2, 0, 16, uint16_t, cfg->tc_sched[4].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 2, 16, 4, enum dpni_tx_schedule_mode, \ ++ cfg->tc_sched[4].mode); \ ++ MC_CMD_OP(cmd, 2, 32, 16, uint16_t, cfg->tc_sched[5].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 2, 48, 4, enum dpni_tx_schedule_mode, \ ++ cfg->tc_sched[5].mode); \ ++ MC_CMD_OP(cmd, 3, 0, 16, uint16_t, cfg->tc_sched[6].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 3, 16, 4, enum dpni_tx_schedule_mode, \ ++ cfg->tc_sched[6].mode); \ ++ MC_CMD_OP(cmd, 3, 32, 16, uint16_t, cfg->tc_sched[7].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 3, 48, 4, enum dpni_tx_schedule_mode, \ ++ cfg->tc_sched[7].mode); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_RX_TC_DIST(cmd, tc_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, cfg->dist_size); \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 0, 24, 4, enum dpni_dist_mode, cfg->dist_mode); \ ++ MC_CMD_OP(cmd, 0, 28, 4, enum dpni_fs_miss_action, \ ++ cfg->fs_cfg.miss_action); \ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, cfg->fs_cfg.default_flow_id); \ ++ MC_CMD_OP(cmd, 6, 0, 64, uint64_t, cfg->key_cfg_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_TX_FLOW(cmd, flow_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 43, 1, int, cfg->l3_chksum_gen);\ ++ MC_CMD_OP(cmd, 0, 44, 1, int, cfg->l4_chksum_gen);\ ++ MC_CMD_OP(cmd, 0, 45, 1, int, cfg->use_common_tx_conf_queue);\ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id);\ ++ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->options);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_SET_TX_FLOW(cmd, flow_id) \ ++ MC_RSP_OP(cmd, 0, 48, 16, uint16_t, flow_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_TX_FLOW(cmd, flow_id) \ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_TX_FLOW(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 43, 1, int, attr->l3_chksum_gen);\ ++ MC_RSP_OP(cmd, 0, 44, 1, int, attr->l4_chksum_gen);\ ++ MC_RSP_OP(cmd, 0, 45, 1, int, attr->use_common_tx_conf_queue);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_RX_FLOW(cmd, tc_id, flow_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, cfg->dest_cfg.dest_id); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->dest_cfg.priority);\ ++ MC_CMD_OP(cmd, 0, 40, 2, enum dpni_dest, cfg->dest_cfg.dest_type);\ ++ MC_CMD_OP(cmd, 0, 42, 1, int, cfg->order_preservation_en);\ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->user_ctx); \ ++ MC_CMD_OP(cmd, 2, 16, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 2, 32, 32, uint32_t, cfg->options); \ ++ MC_CMD_OP(cmd, 3, 0, 4, enum dpni_flc_type, cfg->flc_cfg.flc_type); \ ++ MC_CMD_OP(cmd, 3, 4, 4, enum dpni_stash_size, \ ++ cfg->flc_cfg.frame_data_size);\ ++ MC_CMD_OP(cmd, 3, 8, 4, enum dpni_stash_size, \ ++ cfg->flc_cfg.flow_context_size);\ ++ MC_CMD_OP(cmd, 3, 32, 32, uint32_t, cfg->flc_cfg.options);\ ++ MC_CMD_OP(cmd, 4, 0, 64, uint64_t, cfg->flc_cfg.flow_context);\ ++ MC_CMD_OP(cmd, 5, 0, 32, uint32_t, cfg->tail_drop_threshold); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_RX_FLOW(cmd, tc_id, flow_id) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_RX_FLOW(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, int, attr->dest_cfg.dest_id); \ ++ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->dest_cfg.priority);\ ++ MC_RSP_OP(cmd, 0, 40, 2, enum dpni_dest, attr->dest_cfg.dest_type); \ ++ MC_RSP_OP(cmd, 0, 42, 1, int, attr->order_preservation_en);\ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->user_ctx); \ ++ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, attr->tail_drop_threshold); \ ++ MC_RSP_OP(cmd, 2, 32, 32, uint32_t, attr->fqid); \ ++ MC_RSP_OP(cmd, 3, 0, 4, enum dpni_flc_type, attr->flc_cfg.flc_type); \ ++ MC_RSP_OP(cmd, 3, 4, 4, enum dpni_stash_size, \ ++ attr->flc_cfg.frame_data_size);\ ++ MC_RSP_OP(cmd, 3, 8, 4, enum dpni_stash_size, \ ++ attr->flc_cfg.flow_context_size);\ ++ MC_RSP_OP(cmd, 3, 32, 32, uint32_t, attr->flc_cfg.options);\ ++ MC_RSP_OP(cmd, 4, 0, 64, uint64_t, attr->flc_cfg.flow_context);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_RX_ERR_QUEUE(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, cfg->dest_cfg.dest_id); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->dest_cfg.priority);\ ++ MC_CMD_OP(cmd, 0, 40, 2, enum dpni_dest, cfg->dest_cfg.dest_type);\ ++ MC_CMD_OP(cmd, 0, 42, 1, int, cfg->order_preservation_en);\ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->user_ctx); \ ++ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->options); \ ++ MC_CMD_OP(cmd, 2, 32, 32, uint32_t, cfg->tail_drop_threshold); \ ++ MC_CMD_OP(cmd, 3, 0, 4, enum dpni_flc_type, cfg->flc_cfg.flc_type); \ ++ MC_CMD_OP(cmd, 3, 4, 4, enum dpni_stash_size, \ ++ cfg->flc_cfg.frame_data_size);\ ++ MC_CMD_OP(cmd, 3, 8, 4, enum dpni_stash_size, \ ++ cfg->flc_cfg.flow_context_size);\ ++ MC_CMD_OP(cmd, 3, 32, 32, uint32_t, cfg->flc_cfg.options);\ ++ MC_CMD_OP(cmd, 4, 0, 64, uint64_t, cfg->flc_cfg.flow_context);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_RX_ERR_QUEUE(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, int, attr->dest_cfg.dest_id); \ ++ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->dest_cfg.priority);\ ++ MC_RSP_OP(cmd, 0, 40, 2, enum dpni_dest, attr->dest_cfg.dest_type);\ ++ MC_RSP_OP(cmd, 0, 42, 1, int, attr->order_preservation_en);\ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->user_ctx); \ ++ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, attr->tail_drop_threshold); \ ++ MC_RSP_OP(cmd, 2, 32, 32, uint32_t, attr->fqid); \ ++ MC_RSP_OP(cmd, 3, 0, 4, enum dpni_flc_type, attr->flc_cfg.flc_type); \ ++ MC_RSP_OP(cmd, 3, 4, 4, enum dpni_stash_size, \ ++ attr->flc_cfg.frame_data_size);\ ++ MC_RSP_OP(cmd, 3, 8, 4, enum dpni_stash_size, \ ++ attr->flc_cfg.flow_context_size);\ ++ MC_RSP_OP(cmd, 3, 32, 32, uint32_t, attr->flc_cfg.options);\ ++ MC_RSP_OP(cmd, 4, 0, 64, uint64_t, attr->flc_cfg.flow_context);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_TX_CONF_REVOKE(cmd, revoke) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, revoke) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_QOS_TABLE(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->default_tc); \ ++ MC_CMD_OP(cmd, 0, 40, 1, int, cfg->discard_on_miss); \ ++ MC_CMD_OP(cmd, 6, 0, 64, uint64_t, cfg->key_cfg_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_ADD_QOS_ENTRY(cmd, cfg, tc_id) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->key_size); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->key_iova); \ ++ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->mask_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_REMOVE_QOS_ENTRY(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->key_size); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->key_iova); \ ++ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->mask_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_ADD_FS_ENTRY(cmd, tc_id, cfg, flow_id) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id); \ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->key_size); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->key_iova); \ ++ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->mask_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_REMOVE_FS_ENTRY(cmd, tc_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->key_size); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->key_iova); \ ++ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->mask_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_CLEAR_FS_ENTRIES(cmd, tc_id) \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_VLAN_INSERTION(cmd, en) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_VLAN_REMOVAL(cmd, en) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_IPR(cmd, en) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_IPF(cmd, en) \ ++ MC_CMD_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_RX_TC_POLICING(cmd, tc_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 4, enum dpni_policer_mode, cfg->mode); \ ++ MC_CMD_OP(cmd, 0, 4, 4, enum dpni_policer_color, cfg->default_color); \ ++ MC_CMD_OP(cmd, 0, 8, 4, enum dpni_policer_unit, cfg->units); \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, cfg->options); \ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->cir); \ ++ MC_CMD_OP(cmd, 1, 32, 32, uint32_t, cfg->cbs); \ ++ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->eir); \ ++ MC_CMD_OP(cmd, 2, 32, 32, uint32_t, cfg->ebs);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_RX_TC_POLICING(cmd, tc_id) \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_RSP_GET_RX_TC_POLICING(cmd, cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 4, enum dpni_policer_mode, cfg->mode); \ ++ MC_RSP_OP(cmd, 0, 4, 4, enum dpni_policer_color, cfg->default_color); \ ++ MC_RSP_OP(cmd, 0, 8, 4, enum dpni_policer_unit, cfg->units); \ ++ MC_RSP_OP(cmd, 0, 32, 32, uint32_t, cfg->options); \ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, cfg->cir); \ ++ MC_RSP_OP(cmd, 1, 32, 32, uint32_t, cfg->cbs); \ ++ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, cfg->eir); \ ++ MC_RSP_OP(cmd, 2, 32, 32, uint32_t, cfg->ebs);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_PREP_EARLY_DROP(ext, cfg) \ ++do { \ ++ MC_PREP_OP(ext, 0, 0, 2, enum dpni_early_drop_mode, cfg->mode); \ ++ MC_PREP_OP(ext, 0, 2, 2, \ ++ enum dpni_congestion_unit, cfg->units); \ ++ MC_PREP_OP(ext, 0, 32, 32, uint32_t, cfg->tail_drop_threshold); \ ++ MC_PREP_OP(ext, 1, 0, 8, uint8_t, cfg->green.drop_probability); \ ++ MC_PREP_OP(ext, 2, 0, 64, uint64_t, cfg->green.max_threshold); \ ++ MC_PREP_OP(ext, 3, 0, 64, uint64_t, cfg->green.min_threshold); \ ++ MC_PREP_OP(ext, 5, 0, 8, uint8_t, cfg->yellow.drop_probability);\ ++ MC_PREP_OP(ext, 6, 0, 64, uint64_t, cfg->yellow.max_threshold); \ ++ MC_PREP_OP(ext, 7, 0, 64, uint64_t, cfg->yellow.min_threshold); \ ++ MC_PREP_OP(ext, 9, 0, 8, uint8_t, cfg->red.drop_probability); \ ++ MC_PREP_OP(ext, 10, 0, 64, uint64_t, cfg->red.max_threshold); \ ++ MC_PREP_OP(ext, 11, 0, 64, uint64_t, cfg->red.min_threshold); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_EXT_EARLY_DROP(ext, cfg) \ ++do { \ ++ MC_EXT_OP(ext, 0, 0, 2, enum dpni_early_drop_mode, cfg->mode); \ ++ MC_EXT_OP(ext, 0, 2, 2, \ ++ enum dpni_congestion_unit, cfg->units); \ ++ MC_EXT_OP(ext, 0, 32, 32, uint32_t, cfg->tail_drop_threshold); \ ++ MC_EXT_OP(ext, 1, 0, 8, uint8_t, cfg->green.drop_probability); \ ++ MC_EXT_OP(ext, 2, 0, 64, uint64_t, cfg->green.max_threshold); \ ++ MC_EXT_OP(ext, 3, 0, 64, uint64_t, cfg->green.min_threshold); \ ++ MC_EXT_OP(ext, 5, 0, 8, uint8_t, cfg->yellow.drop_probability);\ ++ MC_EXT_OP(ext, 6, 0, 64, uint64_t, cfg->yellow.max_threshold); \ ++ MC_EXT_OP(ext, 7, 0, 64, uint64_t, cfg->yellow.min_threshold); \ ++ MC_EXT_OP(ext, 9, 0, 8, uint8_t, cfg->red.drop_probability); \ ++ MC_EXT_OP(ext, 10, 0, 64, uint64_t, cfg->red.max_threshold); \ ++ MC_EXT_OP(ext, 11, 0, 64, uint64_t, cfg->red.min_threshold); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_RX_TC_EARLY_DROP(cmd, tc_id, early_drop_iova) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, early_drop_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_RX_TC_EARLY_DROP(cmd, tc_id, early_drop_iova) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, early_drop_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_SET_TX_TC_EARLY_DROP(cmd, tc_id, early_drop_iova) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, early_drop_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPNI_CMD_GET_TX_TC_EARLY_DROP(cmd, tc_id, early_drop_iova) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, early_drop_iova); \ ++} while (0) ++ ++#define DPNI_CMD_SET_RX_TC_CONGESTION_NOTIFICATION(cmd, tc_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 2, enum dpni_congestion_unit, cfg->units); \ ++ MC_CMD_OP(cmd, 0, 4, 4, enum dpni_dest, cfg->dest_cfg.dest_type); \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->dest_cfg.priority); \ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->threshold_entry); \ ++ MC_CMD_OP(cmd, 1, 32, 32, uint32_t, cfg->threshold_exit); \ ++ MC_CMD_OP(cmd, 2, 0, 16, uint16_t, cfg->options); \ ++ MC_CMD_OP(cmd, 2, 32, 32, int, cfg->dest_cfg.dest_id); \ ++ MC_CMD_OP(cmd, 3, 0, 64, uint64_t, cfg->message_ctx); \ ++ MC_CMD_OP(cmd, 4, 0, 64, uint64_t, cfg->message_iova); \ ++} while (0) ++ ++#define DPNI_CMD_GET_RX_TC_CONGESTION_NOTIFICATION(cmd, tc_id) \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc_id) ++ ++#define DPNI_RSP_GET_RX_TC_CONGESTION_NOTIFICATION(cmd, cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 2, enum dpni_congestion_unit, cfg->units); \ ++ MC_RSP_OP(cmd, 0, 4, 4, enum dpni_dest, cfg->dest_cfg.dest_type); \ ++ MC_RSP_OP(cmd, 0, 16, 8, uint8_t, cfg->dest_cfg.priority); \ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, cfg->threshold_entry); \ ++ MC_RSP_OP(cmd, 1, 32, 32, uint32_t, cfg->threshold_exit); \ ++ MC_RSP_OP(cmd, 2, 0, 16, uint16_t, cfg->options); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, cfg->dest_cfg.dest_id); \ ++ MC_RSP_OP(cmd, 3, 0, 64, uint64_t, cfg->message_ctx); \ ++ MC_RSP_OP(cmd, 4, 0, 64, uint64_t, cfg->message_iova); \ ++} while (0) ++ ++#define DPNI_CMD_SET_TX_TC_CONGESTION_NOTIFICATION(cmd, tc_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 2, enum dpni_congestion_unit, cfg->units); \ ++ MC_CMD_OP(cmd, 0, 4, 4, enum dpni_dest, cfg->dest_cfg.dest_type); \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->dest_cfg.priority); \ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->threshold_entry); \ ++ MC_CMD_OP(cmd, 1, 32, 32, uint32_t, cfg->threshold_exit); \ ++ MC_CMD_OP(cmd, 2, 0, 16, uint16_t, cfg->options); \ ++ MC_CMD_OP(cmd, 2, 32, 32, int, cfg->dest_cfg.dest_id); \ ++ MC_CMD_OP(cmd, 3, 0, 64, uint64_t, cfg->message_ctx); \ ++ MC_CMD_OP(cmd, 4, 0, 64, uint64_t, cfg->message_iova); \ ++} while (0) ++ ++#define DPNI_CMD_GET_TX_TC_CONGESTION_NOTIFICATION(cmd, tc_id) \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc_id) ++ ++#define DPNI_RSP_GET_TX_TC_CONGESTION_NOTIFICATION(cmd, cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 2, enum dpni_congestion_unit, cfg->units); \ ++ MC_RSP_OP(cmd, 0, 4, 4, enum dpni_dest, cfg->dest_cfg.dest_type); \ ++ MC_RSP_OP(cmd, 0, 16, 8, uint8_t, cfg->dest_cfg.priority); \ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, cfg->threshold_entry); \ ++ MC_RSP_OP(cmd, 1, 32, 32, uint32_t, cfg->threshold_exit); \ ++ MC_RSP_OP(cmd, 2, 0, 16, uint16_t, cfg->options); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, cfg->dest_cfg.dest_id); \ ++ MC_RSP_OP(cmd, 3, 0, 64, uint64_t, cfg->message_ctx); \ ++ MC_RSP_OP(cmd, 4, 0, 64, uint64_t, cfg->message_iova); \ ++} while (0) ++ ++#define DPNI_CMD_SET_TX_CONF(cmd, flow_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->queue_cfg.dest_cfg.priority); \ ++ MC_CMD_OP(cmd, 0, 40, 2, enum dpni_dest, \ ++ cfg->queue_cfg.dest_cfg.dest_type); \ ++ MC_CMD_OP(cmd, 0, 42, 1, int, cfg->errors_only); \ ++ MC_CMD_OP(cmd, 0, 46, 1, int, cfg->queue_cfg.order_preservation_en); \ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->queue_cfg.user_ctx); \ ++ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->queue_cfg.options); \ ++ MC_CMD_OP(cmd, 2, 32, 32, int, cfg->queue_cfg.dest_cfg.dest_id); \ ++ MC_CMD_OP(cmd, 3, 0, 32, uint32_t, \ ++ cfg->queue_cfg.tail_drop_threshold); \ ++ MC_CMD_OP(cmd, 4, 0, 4, enum dpni_flc_type, \ ++ cfg->queue_cfg.flc_cfg.flc_type); \ ++ MC_CMD_OP(cmd, 4, 4, 4, enum dpni_stash_size, \ ++ cfg->queue_cfg.flc_cfg.frame_data_size); \ ++ MC_CMD_OP(cmd, 4, 8, 4, enum dpni_stash_size, \ ++ cfg->queue_cfg.flc_cfg.flow_context_size); \ ++ MC_CMD_OP(cmd, 4, 32, 32, uint32_t, cfg->queue_cfg.flc_cfg.options); \ ++ MC_CMD_OP(cmd, 5, 0, 64, uint64_t, \ ++ cfg->queue_cfg.flc_cfg.flow_context); \ ++} while (0) ++ ++#define DPNI_CMD_GET_TX_CONF(cmd, flow_id) \ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id) ++ ++#define DPNI_RSP_GET_TX_CONF(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, \ ++ attr->queue_attr.dest_cfg.priority); \ ++ MC_RSP_OP(cmd, 0, 40, 2, enum dpni_dest, \ ++ attr->queue_attr.dest_cfg.dest_type); \ ++ MC_RSP_OP(cmd, 0, 42, 1, int, attr->errors_only); \ ++ MC_RSP_OP(cmd, 0, 46, 1, int, \ ++ attr->queue_attr.order_preservation_en); \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->queue_attr.user_ctx); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, attr->queue_attr.dest_cfg.dest_id); \ ++ MC_RSP_OP(cmd, 3, 0, 32, uint32_t, \ ++ attr->queue_attr.tail_drop_threshold); \ ++ MC_RSP_OP(cmd, 3, 32, 32, uint32_t, attr->queue_attr.fqid); \ ++ MC_RSP_OP(cmd, 4, 0, 4, enum dpni_flc_type, \ ++ attr->queue_attr.flc_cfg.flc_type); \ ++ MC_RSP_OP(cmd, 4, 4, 4, enum dpni_stash_size, \ ++ attr->queue_attr.flc_cfg.frame_data_size); \ ++ MC_RSP_OP(cmd, 4, 8, 4, enum dpni_stash_size, \ ++ attr->queue_attr.flc_cfg.flow_context_size); \ ++ MC_RSP_OP(cmd, 4, 32, 32, uint32_t, attr->queue_attr.flc_cfg.options); \ ++ MC_RSP_OP(cmd, 5, 0, 64, uint64_t, \ ++ attr->queue_attr.flc_cfg.flow_context); \ ++} while (0) ++ ++#define DPNI_CMD_SET_TX_CONF_CONGESTION_NOTIFICATION(cmd, flow_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 2, enum dpni_congestion_unit, cfg->units); \ ++ MC_CMD_OP(cmd, 0, 4, 4, enum dpni_dest, cfg->dest_cfg.dest_type); \ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->dest_cfg.priority); \ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id); \ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->threshold_entry); \ ++ MC_CMD_OP(cmd, 1, 32, 32, uint32_t, cfg->threshold_exit); \ ++ MC_CMD_OP(cmd, 2, 0, 16, uint16_t, cfg->options); \ ++ MC_CMD_OP(cmd, 2, 32, 32, int, cfg->dest_cfg.dest_id); \ ++ MC_CMD_OP(cmd, 3, 0, 64, uint64_t, cfg->message_ctx); \ ++ MC_CMD_OP(cmd, 4, 0, 64, uint64_t, cfg->message_iova); \ ++} while (0) ++ ++#define DPNI_CMD_GET_TX_CONF_CONGESTION_NOTIFICATION(cmd, flow_id) \ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id) ++ ++#define DPNI_RSP_GET_TX_CONF_CONGESTION_NOTIFICATION(cmd, cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 2, enum dpni_congestion_unit, cfg->units); \ ++ MC_RSP_OP(cmd, 0, 4, 4, enum dpni_dest, cfg->dest_cfg.dest_type); \ ++ MC_RSP_OP(cmd, 0, 16, 8, uint8_t, cfg->dest_cfg.priority); \ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, cfg->threshold_entry); \ ++ MC_RSP_OP(cmd, 1, 32, 32, uint32_t, cfg->threshold_exit); \ ++ MC_RSP_OP(cmd, 2, 0, 16, uint16_t, cfg->options); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, cfg->dest_cfg.dest_id); \ ++ MC_RSP_OP(cmd, 3, 0, 64, uint64_t, cfg->message_ctx); \ ++ MC_RSP_OP(cmd, 4, 0, 64, uint64_t, cfg->message_iova); \ ++} while (0) ++ ++#endif /* _FSL_DPNI_CMD_H */ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpni.c +@@ -0,0 +1,1907 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include "../../fsl-mc/include/mc-sys.h" ++#include "../../fsl-mc/include/mc-cmd.h" ++#include "dpni.h" ++#include "dpni-cmd.h" ++ ++int dpni_prepare_key_cfg(const struct dpkg_profile_cfg *cfg, ++ uint8_t *key_cfg_buf) ++{ ++ int i, j; ++ int offset = 0; ++ int param = 1; ++ uint64_t *params = (uint64_t *)key_cfg_buf; ++ ++ if (!key_cfg_buf || !cfg) ++ return -EINVAL; ++ ++ params[0] |= mc_enc(0, 8, cfg->num_extracts); ++ params[0] = cpu_to_le64(params[0]); ++ ++ if (cfg->num_extracts >= DPKG_MAX_NUM_OF_EXTRACTS) ++ return -EINVAL; ++ ++ for (i = 0; i < cfg->num_extracts; i++) { ++ switch (cfg->extracts[i].type) { ++ case DPKG_EXTRACT_FROM_HDR: ++ params[param] |= mc_enc(0, 8, ++ cfg->extracts[i].extract.from_hdr.prot); ++ params[param] |= mc_enc(8, 4, ++ cfg->extracts[i].extract.from_hdr.type); ++ params[param] |= mc_enc(16, 8, ++ cfg->extracts[i].extract.from_hdr.size); ++ params[param] |= mc_enc(24, 8, ++ cfg->extracts[i].extract. ++ from_hdr.offset); ++ params[param] |= mc_enc(32, 32, ++ cfg->extracts[i].extract. ++ from_hdr.field); ++ params[param] = cpu_to_le64(params[param]); ++ param++; ++ params[param] |= mc_enc(0, 8, ++ cfg->extracts[i].extract. ++ from_hdr.hdr_index); ++ break; ++ case DPKG_EXTRACT_FROM_DATA: ++ params[param] |= mc_enc(16, 8, ++ cfg->extracts[i].extract. ++ from_data.size); ++ params[param] |= mc_enc(24, 8, ++ cfg->extracts[i].extract. ++ from_data.offset); ++ params[param] = cpu_to_le64(params[param]); ++ param++; ++ break; ++ case DPKG_EXTRACT_FROM_PARSE: ++ params[param] |= mc_enc(16, 8, ++ cfg->extracts[i].extract. ++ from_parse.size); ++ params[param] |= mc_enc(24, 8, ++ cfg->extracts[i].extract. ++ from_parse.offset); ++ params[param] = cpu_to_le64(params[param]); ++ param++; ++ break; ++ default: ++ return -EINVAL; ++ } ++ params[param] |= mc_enc( ++ 24, 8, cfg->extracts[i].num_of_byte_masks); ++ params[param] |= mc_enc(32, 4, cfg->extracts[i].type); ++ params[param] = cpu_to_le64(params[param]); ++ param++; ++ for (offset = 0, j = 0; ++ j < DPKG_NUM_OF_MASKS; ++ offset += 16, j++) { ++ params[param] |= mc_enc( ++ (offset), 8, cfg->extracts[i].masks[j].mask); ++ params[param] |= mc_enc( ++ (offset + 8), 8, ++ cfg->extracts[i].masks[j].offset); ++ } ++ params[param] = cpu_to_le64(params[param]); ++ param++; ++ } ++ return 0; ++} ++ ++int dpni_prepare_extended_cfg(const struct dpni_extended_cfg *cfg, ++ uint8_t *ext_cfg_buf) ++{ ++ uint64_t *ext_params = (uint64_t *)ext_cfg_buf; ++ ++ DPNI_PREP_EXTENDED_CFG(ext_params, cfg); ++ ++ return 0; ++} ++ ++int dpni_extract_extended_cfg(struct dpni_extended_cfg *cfg, ++ const uint8_t *ext_cfg_buf) ++{ ++ uint64_t *ext_params = (uint64_t *)ext_cfg_buf; ++ ++ DPNI_EXT_EXTENDED_CFG(ext_params, cfg); ++ ++ return 0; ++} ++ ++int dpni_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpni_id, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_OPEN, ++ cmd_flags, ++ 0); ++ DPNI_CMD_OPEN(cmd, dpni_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpni_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_CLOSE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpni_cfg *cfg, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_CREATE, ++ cmd_flags, ++ 0); ++ DPNI_CMD_CREATE(cmd, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpni_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_DESTROY, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_pools(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_pools_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_POOLS, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_POOLS(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_ENABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_DISABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_IS_ENABLED, cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_IS_ENABLED(cmd, *en); ++ ++ return 0; ++} ++ ++int dpni_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_RESET, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpni_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_IRQ, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_IRQ(cmd, irq_index, irq_cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpni_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_IRQ, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_IRQ(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_IRQ(cmd, *type, irq_cfg); ++ ++ return 0; ++} ++ ++int dpni_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_IRQ_ENABLE(cmd, irq_index, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_IRQ_ENABLE(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_IRQ_ENABLE(cmd, *en); ++ ++ return 0; ++} ++ ++int dpni_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_IRQ_MASK(cmd, irq_index, mask); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_IRQ_MASK(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_IRQ_MASK(cmd, *mask); ++ ++ return 0; ++} ++ ++int dpni_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_IRQ_STATUS(cmd, irq_index, *status); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_IRQ_STATUS(cmd, *status); ++ ++ return 0; ++} ++ ++int dpni_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_CLEAR_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPNI_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_ATTR, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_ATTR(cmd, attr); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpni_set_errors_behavior(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_error_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_ERRORS_BEHAVIOR, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_ERRORS_BEHAVIOR(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_rx_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_buffer_layout *layout) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_RX_BUFFER_LAYOUT, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_RX_BUFFER_LAYOUT(cmd, layout); ++ ++ return 0; ++} ++ ++int dpni_set_rx_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_buffer_layout *layout) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_RX_BUFFER_LAYOUT, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_RX_BUFFER_LAYOUT(cmd, layout); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_tx_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_buffer_layout *layout) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_TX_BUFFER_LAYOUT, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_TX_BUFFER_LAYOUT(cmd, layout); ++ ++ return 0; ++} ++ ++int dpni_set_tx_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_buffer_layout *layout) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_BUFFER_LAYOUT, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_BUFFER_LAYOUT(cmd, layout); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_tx_conf_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_buffer_layout *layout) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_TX_CONF_BUFFER_LAYOUT, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_TX_CONF_BUFFER_LAYOUT(cmd, layout); ++ ++ return 0; ++} ++ ++int dpni_set_tx_conf_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_buffer_layout *layout) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_CONF_BUFFER_LAYOUT, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_CONF_BUFFER_LAYOUT(cmd, layout); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_l3_chksum_validation(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_L3_CHKSUM_VALIDATION, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_L3_CHKSUM_VALIDATION(cmd, *en); ++ ++ return 0; ++} ++ ++int dpni_set_l3_chksum_validation(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_L3_CHKSUM_VALIDATION, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_L3_CHKSUM_VALIDATION(cmd, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_l4_chksum_validation(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_L4_CHKSUM_VALIDATION, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_L4_CHKSUM_VALIDATION(cmd, *en); ++ ++ return 0; ++} ++ ++int dpni_set_l4_chksum_validation(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_L4_CHKSUM_VALIDATION, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_L4_CHKSUM_VALIDATION(cmd, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_qdid(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *qdid) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_QDID, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_QDID(cmd, *qdid); ++ ++ return 0; ++} ++ ++int dpni_get_sp_info(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_sp_info *sp_info) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_SP_INFO, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_SP_INFO(cmd, sp_info); ++ ++ return 0; ++} ++ ++int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *data_offset) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_TX_DATA_OFFSET, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_TX_DATA_OFFSET(cmd, *data_offset); ++ ++ return 0; ++} ++ ++int dpni_get_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ enum dpni_counter counter, ++ uint64_t *value) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_COUNTER, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_COUNTER(cmd, counter); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_COUNTER(cmd, *value); ++ ++ return 0; ++} ++ ++int dpni_set_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ enum dpni_counter counter, ++ uint64_t value) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_COUNTER, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_COUNTER(cmd, counter, value); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_link_cfg(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_link_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_LINK_CFG, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_LINK_CFG(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_link_state(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_link_state *state) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_LINK_STATE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_LINK_STATE(cmd, state); ++ ++ return 0; ++} ++ ++int dpni_set_tx_shaping(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_tx_shaping_cfg *tx_shaper) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_SHAPING, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_SHAPING(cmd, tx_shaper); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t max_frame_length) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_MAX_FRAME_LENGTH, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_MAX_FRAME_LENGTH(cmd, max_frame_length); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *max_frame_length) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_MAX_FRAME_LENGTH, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_MAX_FRAME_LENGTH(cmd, *max_frame_length); ++ ++ return 0; ++} ++ ++int dpni_set_mtu(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t mtu) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_MTU, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_MTU(cmd, mtu); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_mtu(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *mtu) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_MTU, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_MTU(cmd, *mtu); ++ ++ return 0; ++} ++ ++int dpni_set_multicast_promisc(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_MCAST_PROMISC, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_MULTICAST_PROMISC(cmd, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_multicast_promisc(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_MCAST_PROMISC, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_MULTICAST_PROMISC(cmd, *en); ++ ++ return 0; ++} ++ ++int dpni_set_unicast_promisc(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_UNICAST_PROMISC, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_UNICAST_PROMISC(cmd, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_unicast_promisc(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_UNICAST_PROMISC, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_UNICAST_PROMISC(cmd, *en); ++ ++ return 0; ++} ++ ++int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const uint8_t mac_addr[6]) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_PRIM_MAC, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_PRIMARY_MAC_ADDR(cmd, mac_addr); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t mac_addr[6]) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_PRIM_MAC, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_PRIMARY_MAC_ADDR(cmd, mac_addr); ++ ++ return 0; ++} ++ ++int dpni_add_mac_addr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const uint8_t mac_addr[6]) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_ADD_MAC_ADDR, ++ cmd_flags, ++ token); ++ DPNI_CMD_ADD_MAC_ADDR(cmd, mac_addr); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_remove_mac_addr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const uint8_t mac_addr[6]) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_REMOVE_MAC_ADDR, ++ cmd_flags, ++ token); ++ DPNI_CMD_REMOVE_MAC_ADDR(cmd, mac_addr); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_clear_mac_filters(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int unicast, ++ int multicast) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_CLR_MAC_FILTERS, ++ cmd_flags, ++ token); ++ DPNI_CMD_CLEAR_MAC_FILTERS(cmd, unicast, multicast); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_vlan_filters(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_VLAN_FILTERS, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_VLAN_FILTERS(cmd, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_add_vlan_id(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_ADD_VLAN_ID, ++ cmd_flags, ++ token); ++ DPNI_CMD_ADD_VLAN_ID(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_remove_vlan_id(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_REMOVE_VLAN_ID, ++ cmd_flags, ++ token); ++ DPNI_CMD_REMOVE_VLAN_ID(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_clear_vlan_filters(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_CLR_VLAN_FILTERS, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_tx_selection(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_tx_selection_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_SELECTION, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_SELECTION(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_rx_tc_dist(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_rx_tc_dist_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_RX_TC_DIST, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_RX_TC_DIST(cmd, tc_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_tx_flow(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *flow_id, ++ const struct dpni_tx_flow_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_FLOW, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_FLOW(cmd, *flow_id, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_SET_TX_FLOW(cmd, *flow_id); ++ ++ return 0; ++} ++ ++int dpni_get_tx_flow(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ struct dpni_tx_flow_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_TX_FLOW, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_TX_FLOW(cmd, flow_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_TX_FLOW(cmd, attr); ++ ++ return 0; ++} ++ ++int dpni_set_rx_flow(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint16_t flow_id, ++ const struct dpni_queue_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_RX_FLOW, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_RX_FLOW(cmd, tc_id, flow_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_rx_flow(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint16_t flow_id, ++ struct dpni_queue_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_RX_FLOW, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_RX_FLOW(cmd, tc_id, flow_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_RX_FLOW(cmd, attr); ++ ++ return 0; ++} ++ ++int dpni_set_rx_err_queue(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_queue_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_RX_ERR_QUEUE, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_RX_ERR_QUEUE(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_rx_err_queue(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_queue_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_RX_ERR_QUEUE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPNI_RSP_GET_RX_ERR_QUEUE(cmd, attr); ++ ++ return 0; ++} ++ ++int dpni_set_tx_conf_revoke(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int revoke) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_CONF_REVOKE, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_CONF_REVOKE(cmd, revoke); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_qos_table(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_qos_tbl_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_QOS_TBL, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_QOS_TABLE(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_add_qos_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_rule_cfg *cfg, ++ uint8_t tc_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_ADD_QOS_ENT, ++ cmd_flags, ++ token); ++ DPNI_CMD_ADD_QOS_ENTRY(cmd, cfg, tc_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_remove_qos_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_rule_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_REMOVE_QOS_ENT, ++ cmd_flags, ++ token); ++ DPNI_CMD_REMOVE_QOS_ENTRY(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_clear_qos_table(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_CLR_QOS_TBL, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_add_fs_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_rule_cfg *cfg, ++ uint16_t flow_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_ADD_FS_ENT, ++ cmd_flags, ++ token); ++ DPNI_CMD_ADD_FS_ENTRY(cmd, tc_id, cfg, flow_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_remove_fs_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_rule_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_REMOVE_FS_ENT, ++ cmd_flags, ++ token); ++ DPNI_CMD_REMOVE_FS_ENTRY(cmd, tc_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_clear_fs_entries(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_CLR_FS_ENT, ++ cmd_flags, ++ token); ++ DPNI_CMD_CLEAR_FS_ENTRIES(cmd, tc_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_vlan_insertion(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_VLAN_INSERTION, ++ cmd_flags, token); ++ DPNI_CMD_SET_VLAN_INSERTION(cmd, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_vlan_removal(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_VLAN_REMOVAL, ++ cmd_flags, token); ++ DPNI_CMD_SET_VLAN_REMOVAL(cmd, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_ipr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_IPR, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_IPR(cmd, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_ipf(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_IPF, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_IPF(cmd, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_rx_tc_policing(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_rx_tc_policing_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_RX_TC_POLICING, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_RX_TC_POLICING(cmd, tc_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_rx_tc_policing(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ struct dpni_rx_tc_policing_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_RX_TC_POLICING, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_RX_TC_POLICING(cmd, tc_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ DPNI_RSP_GET_RX_TC_POLICING(cmd, cfg); ++ ++ return 0; ++} ++ ++void dpni_prepare_early_drop(const struct dpni_early_drop_cfg *cfg, ++ uint8_t *early_drop_buf) ++{ ++ uint64_t *ext_params = (uint64_t *)early_drop_buf; ++ ++ DPNI_PREP_EARLY_DROP(ext_params, cfg); ++} ++ ++void dpni_extract_early_drop(struct dpni_early_drop_cfg *cfg, ++ const uint8_t *early_drop_buf) ++{ ++ uint64_t *ext_params = (uint64_t *)early_drop_buf; ++ ++ DPNI_EXT_EARLY_DROP(ext_params, cfg); ++} ++ ++int dpni_set_rx_tc_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint64_t early_drop_iova) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_RX_TC_EARLY_DROP, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_RX_TC_EARLY_DROP(cmd, tc_id, early_drop_iova); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_rx_tc_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint64_t early_drop_iova) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_RX_TC_EARLY_DROP, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_RX_TC_EARLY_DROP(cmd, tc_id, early_drop_iova); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_tx_tc_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint64_t early_drop_iova) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_TC_EARLY_DROP, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_TC_EARLY_DROP(cmd, tc_id, early_drop_iova); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_tx_tc_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint64_t early_drop_iova) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_TX_TC_EARLY_DROP, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_TX_TC_EARLY_DROP(cmd, tc_id, early_drop_iova); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_set_rx_tc_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_congestion_notification_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header( ++ DPNI_CMDID_SET_RX_TC_CONGESTION_NOTIFICATION, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_RX_TC_CONGESTION_NOTIFICATION(cmd, tc_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_rx_tc_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ struct dpni_congestion_notification_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header( ++ DPNI_CMDID_GET_RX_TC_CONGESTION_NOTIFICATION, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_RX_TC_CONGESTION_NOTIFICATION(cmd, tc_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ DPNI_RSP_GET_RX_TC_CONGESTION_NOTIFICATION(cmd, cfg); ++ ++ return 0; ++} ++ ++int dpni_set_tx_tc_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_congestion_notification_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header( ++ DPNI_CMDID_SET_TX_TC_CONGESTION_NOTIFICATION, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_TC_CONGESTION_NOTIFICATION(cmd, tc_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_tx_tc_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ struct dpni_congestion_notification_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header( ++ DPNI_CMDID_GET_TX_TC_CONGESTION_NOTIFICATION, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_TX_TC_CONGESTION_NOTIFICATION(cmd, tc_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ DPNI_RSP_GET_TX_TC_CONGESTION_NOTIFICATION(cmd, cfg); ++ ++ return 0; ++} ++ ++int dpni_set_tx_conf(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ const struct dpni_tx_conf_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_TX_CONF, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_CONF(cmd, flow_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_tx_conf(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ struct dpni_tx_conf_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPNI_CMDID_GET_TX_CONF, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_TX_CONF(cmd, flow_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ DPNI_RSP_GET_TX_CONF(cmd, attr); ++ ++ return 0; ++} ++ ++int dpni_set_tx_conf_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ const struct dpni_congestion_notification_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header( ++ DPNI_CMDID_SET_TX_CONF_CONGESTION_NOTIFICATION, ++ cmd_flags, ++ token); ++ DPNI_CMD_SET_TX_CONF_CONGESTION_NOTIFICATION(cmd, flow_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpni_get_tx_conf_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ struct dpni_congestion_notification_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header( ++ DPNI_CMDID_GET_TX_CONF_CONGESTION_NOTIFICATION, ++ cmd_flags, ++ token); ++ DPNI_CMD_GET_TX_CONF_CONGESTION_NOTIFICATION(cmd, flow_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ DPNI_RSP_GET_TX_CONF_CONGESTION_NOTIFICATION(cmd, cfg); ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpni.h +@@ -0,0 +1,2581 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPNI_H ++#define __FSL_DPNI_H ++ ++#include "dpkg.h" ++ ++struct fsl_mc_io; ++ ++/** ++ * Data Path Network Interface API ++ * Contains initialization APIs and runtime control APIs for DPNI ++ */ ++ ++/** General DPNI macros */ ++ ++/** ++ * Maximum number of traffic classes ++ */ ++#define DPNI_MAX_TC 8 ++/** ++ * Maximum number of buffer pools per DPNI ++ */ ++#define DPNI_MAX_DPBP 8 ++/** ++ * Maximum number of storage-profiles per DPNI ++ */ ++#define DPNI_MAX_SP 2 ++ ++/** ++ * All traffic classes considered; see dpni_set_rx_flow() ++ */ ++#define DPNI_ALL_TCS (uint8_t)(-1) ++/** ++ * All flows within traffic class considered; see dpni_set_rx_flow() ++ */ ++#define DPNI_ALL_TC_FLOWS (uint16_t)(-1) ++/** ++ * Generate new flow ID; see dpni_set_tx_flow() ++ */ ++#define DPNI_NEW_FLOW_ID (uint16_t)(-1) ++/* use for common tx-conf queue; see dpni_set_tx_conf_() */ ++#define DPNI_COMMON_TX_CONF (uint16_t)(-1) ++ ++/** ++ * dpni_open() - Open a control session for the specified object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @dpni_id: DPNI unique ID ++ * @token: Returned token; use in subsequent API calls ++ * ++ * This function can be used to open a control session for an ++ * already created object; an object may have been declared in ++ * the DPL or by calling the dpni_create() function. ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent commands for ++ * this specific object. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpni_id, ++ uint16_t *token); ++ ++/** ++ * dpni_close() - Close the control session of the object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * ++ * After this function is called, no further operations are ++ * allowed on the object without opening a new control session. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/* DPNI configuration options */ ++ ++/** ++ * Allow different distribution key profiles for different traffic classes; ++ * if not set, a single key profile is assumed ++ */ ++#define DPNI_OPT_ALLOW_DIST_KEY_PER_TC 0x00000001 ++ ++/** ++ * Disable all non-error transmit confirmation; error frames are reported ++ * back to a common Tx error queue ++ */ ++#define DPNI_OPT_TX_CONF_DISABLED 0x00000002 ++ ++/** ++ * Disable per-sender private Tx confirmation/error queue ++ */ ++#define DPNI_OPT_PRIVATE_TX_CONF_ERROR_DISABLED 0x00000004 ++ ++/** ++ * Support distribution based on hashed key; ++ * allows statistical distribution over receive queues in a traffic class ++ */ ++#define DPNI_OPT_DIST_HASH 0x00000010 ++ ++/** ++ * DEPRECATED - if this flag is selected and and all new 'max_fs_entries' are ++ * '0' then backward compatibility is preserved; ++ * Support distribution based on flow steering; ++ * allows explicit control of distribution over receive queues in a traffic ++ * class ++ */ ++#define DPNI_OPT_DIST_FS 0x00000020 ++ ++/** ++ * Unicast filtering support ++ */ ++#define DPNI_OPT_UNICAST_FILTER 0x00000080 ++/** ++ * Multicast filtering support ++ */ ++#define DPNI_OPT_MULTICAST_FILTER 0x00000100 ++/** ++ * VLAN filtering support ++ */ ++#define DPNI_OPT_VLAN_FILTER 0x00000200 ++/** ++ * Support IP reassembly on received packets ++ */ ++#define DPNI_OPT_IPR 0x00000800 ++/** ++ * Support IP fragmentation on transmitted packets ++ */ ++#define DPNI_OPT_IPF 0x00001000 ++/** ++ * VLAN manipulation support ++ */ ++#define DPNI_OPT_VLAN_MANIPULATION 0x00010000 ++/** ++ * Support masking of QoS lookup keys ++ */ ++#define DPNI_OPT_QOS_MASK_SUPPORT 0x00020000 ++/** ++ * Support masking of Flow Steering lookup keys ++ */ ++#define DPNI_OPT_FS_MASK_SUPPORT 0x00040000 ++ ++/** ++ * struct dpni_extended_cfg - Structure representing extended DPNI configuration ++ * @tc_cfg: TCs configuration ++ * @ipr_cfg: IP reassembly configuration ++ */ ++struct dpni_extended_cfg { ++ /** ++ * struct tc_cfg - TC configuration ++ * @max_dist: Maximum distribution size for Rx traffic class; ++ * supported values: 1,2,3,4,6,7,8,12,14,16,24,28,32,48,56,64,96, ++ * 112,128,192,224,256,384,448,512,768,896,1024; ++ * value '0' will be treated as '1'. ++ * other unsupported values will be round down to the nearest ++ * supported value. ++ * @max_fs_entries: Maximum FS entries for Rx traffic class; ++ * '0' means no support for this TC; ++ */ ++ struct { ++ uint16_t max_dist; ++ uint16_t max_fs_entries; ++ } tc_cfg[DPNI_MAX_TC]; ++ /** ++ * struct ipr_cfg - Structure representing IP reassembly configuration ++ * @max_reass_frm_size: Maximum size of the reassembled frame ++ * @min_frag_size_ipv4: Minimum fragment size of IPv4 fragments ++ * @min_frag_size_ipv6: Minimum fragment size of IPv6 fragments ++ * @max_open_frames_ipv4: Maximum concurrent IPv4 packets in reassembly ++ * process ++ * @max_open_frames_ipv6: Maximum concurrent IPv6 packets in reassembly ++ * process ++ */ ++ struct { ++ uint16_t max_reass_frm_size; ++ uint16_t min_frag_size_ipv4; ++ uint16_t min_frag_size_ipv6; ++ uint16_t max_open_frames_ipv4; ++ uint16_t max_open_frames_ipv6; ++ } ipr_cfg; ++}; ++ ++/** ++ * dpni_prepare_extended_cfg() - function prepare extended parameters ++ * @cfg: extended structure ++ * @ext_cfg_buf: Zeroed 256 bytes of memory before mapping it to DMA ++ * ++ * This function has to be called before dpni_create() ++ */ ++int dpni_prepare_extended_cfg(const struct dpni_extended_cfg *cfg, ++ uint8_t *ext_cfg_buf); ++ ++/** ++ * struct dpni_cfg - Structure representing DPNI configuration ++ * @mac_addr: Primary MAC address ++ * @adv: Advanced parameters; default is all zeros; ++ * use this structure to change default settings ++ */ ++struct dpni_cfg { ++ uint8_t mac_addr[6]; ++ /** ++ * struct adv - Advanced parameters ++ * @options: Mask of available options; use 'DPNI_OPT_' values ++ * @start_hdr: Selects the packet starting header for parsing; ++ * 'NET_PROT_NONE' is treated as default: 'NET_PROT_ETH' ++ * @max_senders: Maximum number of different senders; used as the number ++ * of dedicated Tx flows; Non-power-of-2 values are rounded ++ * up to the next power-of-2 value as hardware demands it; ++ * '0' will be treated as '1' ++ * @max_tcs: Maximum number of traffic classes (for both Tx and Rx); ++ * '0' will e treated as '1' ++ * @max_unicast_filters: Maximum number of unicast filters; ++ * '0' is treated as '16' ++ * @max_multicast_filters: Maximum number of multicast filters; ++ * '0' is treated as '64' ++ * @max_qos_entries: if 'max_tcs > 1', declares the maximum entries in ++ * the QoS table; '0' is treated as '64' ++ * @max_qos_key_size: Maximum key size for the QoS look-up; ++ * '0' is treated as '24' which is enough for IPv4 ++ * 5-tuple ++ * @max_dist_key_size: Maximum key size for the distribution; ++ * '0' is treated as '24' which is enough for IPv4 5-tuple ++ * @max_policers: Maximum number of policers; ++ * should be between '0' and max_tcs ++ * @max_congestion_ctrl: Maximum number of congestion control groups ++ * (CGs); covers early drop and congestion notification ++ * requirements; ++ * should be between '0' and ('max_tcs' + 'max_senders') ++ * @ext_cfg_iova: I/O virtual address of 256 bytes DMA-able memory ++ * filled with the extended configuration by calling ++ * dpni_prepare_extended_cfg() ++ */ ++ struct { ++ uint32_t options; ++ enum net_prot start_hdr; ++ uint8_t max_senders; ++ uint8_t max_tcs; ++ uint8_t max_unicast_filters; ++ uint8_t max_multicast_filters; ++ uint8_t max_vlan_filters; ++ uint8_t max_qos_entries; ++ uint8_t max_qos_key_size; ++ uint8_t max_dist_key_size; ++ uint8_t max_policers; ++ uint8_t max_congestion_ctrl; ++ uint64_t ext_cfg_iova; ++ } adv; ++}; ++ ++/** ++ * dpni_create() - Create the DPNI object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @cfg: Configuration structure ++ * @token: Returned token; use in subsequent API calls ++ * ++ * Create the DPNI object, allocate required resources and ++ * perform required initialization. ++ * ++ * The object can be created either by declaring it in the ++ * DPL file, or by calling this function. ++ * ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent calls to ++ * this specific object. For objects that are created using the ++ * DPL file, call dpni_open() function to get an authentication ++ * token first. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpni_cfg *cfg, ++ uint16_t *token); ++ ++/** ++ * dpni_destroy() - Destroy the DPNI object and release all its resources. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * struct dpni_pools_cfg - Structure representing buffer pools configuration ++ * @num_dpbp: Number of DPBPs ++ * @pools: Array of buffer pools parameters; The number of valid entries ++ * must match 'num_dpbp' value ++ */ ++struct dpni_pools_cfg { ++ uint8_t num_dpbp; ++ /** ++ * struct pools - Buffer pools parameters ++ * @dpbp_id: DPBP object ID ++ * @buffer_size: Buffer size ++ * @backup_pool: Backup pool ++ */ ++ struct { ++ int dpbp_id; ++ uint16_t buffer_size; ++ int backup_pool; ++ } pools[DPNI_MAX_DPBP]; ++}; ++ ++/** ++ * dpni_set_pools() - Set buffer pools configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @cfg: Buffer pools configuration ++ * ++ * mandatory for DPNI operation ++ * warning:Allowed only when DPNI is disabled ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_pools(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_pools_cfg *cfg); ++ ++/** ++ * dpni_enable() - Enable the DPNI, allow sending and receiving frames. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpni_disable() - Disable the DPNI, stop sending and receiving frames. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpni_is_enabled() - Check if the DPNI is enabled. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Returns '1' if object is enabled; '0' otherwise ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en); ++ ++/** ++ * dpni_reset() - Reset the DPNI, returns the object to initial state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * DPNI IRQ Index and Events ++ */ ++ ++/** ++ * IRQ index ++ */ ++#define DPNI_IRQ_INDEX 0 ++/** ++ * IRQ event - indicates a change in link state ++ */ ++#define DPNI_IRQ_EVENT_LINK_CHANGED 0x00000001 ++ ++/** ++ * struct dpni_irq_cfg - IRQ configuration ++ * @addr: Address that must be written to signal a message-based interrupt ++ * @val: Value to write into irq_addr address ++ * @irq_num: A user defined number associated with this IRQ ++ */ ++struct dpni_irq_cfg { ++ uint64_t addr; ++ uint32_t val; ++ int irq_num; ++}; ++ ++/** ++ * dpni_set_irq() - Set IRQ information for the DPNI to trigger an interrupt. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @irq_index: Identifies the interrupt index to configure ++ * @irq_cfg: IRQ configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpni_irq_cfg *irq_cfg); ++ ++/** ++ * dpni_get_irq() - Get IRQ information from the DPNI. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @irq_index: The interrupt index to configure ++ * @type: Interrupt type: 0 represents message interrupt ++ * type (both irq_addr and irq_val are valid) ++ * @irq_cfg: IRQ attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpni_irq_cfg *irq_cfg); ++ ++/** ++ * dpni_set_irq_enable() - Set overall interrupt state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @irq_index: The interrupt index to configure ++ * @en: Interrupt state: - enable = 1, disable = 0 ++ * ++ * Allows GPP software to control when interrupts are generated. ++ * Each interrupt can have up to 32 causes. The enable/disable control's the ++ * overall interrupt state. if the interrupt is disabled no causes will cause ++ * an interrupt. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en); ++ ++/** ++ * dpni_get_irq_enable() - Get overall interrupt state ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @irq_index: The interrupt index to configure ++ * @en: Returned interrupt state - enable = 1, disable = 0 ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en); ++ ++/** ++ * dpni_set_irq_mask() - Set interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @irq_index: The interrupt index to configure ++ * @mask: event mask to trigger interrupt; ++ * each bit: ++ * 0 = ignore event ++ * 1 = consider event for asserting IRQ ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask); ++ ++/** ++ * dpni_get_irq_mask() - Get interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @irq_index: The interrupt index to configure ++ * @mask: Returned event mask to trigger interrupt ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask); ++ ++/** ++ * dpni_get_irq_status() - Get the current status of any pending interrupts. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @irq_index: The interrupt index to configure ++ * @status: Returned interrupts status - one bit per cause: ++ * 0 = no interrupt pending ++ * 1 = interrupt pending ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status); ++ ++/** ++ * dpni_clear_irq_status() - Clear a pending interrupt's status ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @irq_index: The interrupt index to configure ++ * @status: bits to clear (W1C) - one bit per cause: ++ * 0 = don't change ++ * 1 = clear status bit ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status); ++ ++/** ++ * struct dpni_attr - Structure representing DPNI attributes ++ * @id: DPNI object ID ++ * @version: DPNI version ++ * @start_hdr: Indicates the packet starting header for parsing ++ * @options: Mask of available options; reflects the value as was given in ++ * object's creation ++ * @max_senders: Maximum number of different senders; used as the number ++ * of dedicated Tx flows; ++ * @max_tcs: Maximum number of traffic classes (for both Tx and Rx) ++ * @max_unicast_filters: Maximum number of unicast filters ++ * @max_multicast_filters: Maximum number of multicast filters ++ * @max_vlan_filters: Maximum number of VLAN filters ++ * @max_qos_entries: if 'max_tcs > 1', declares the maximum entries in QoS table ++ * @max_qos_key_size: Maximum key size for the QoS look-up ++ * @max_dist_key_size: Maximum key size for the distribution look-up ++ * @max_policers: Maximum number of policers; ++ * @max_congestion_ctrl: Maximum number of congestion control groups (CGs); ++ * @ext_cfg_iova: I/O virtual address of 256 bytes DMA-able memory; ++ * call dpni_extract_extended_cfg() to extract the extended configuration ++ */ ++struct dpni_attr { ++ int id; ++ /** ++ * struct version - DPNI version ++ * @major: DPNI major version ++ * @minor: DPNI minor version ++ */ ++ struct { ++ uint16_t major; ++ uint16_t minor; ++ } version; ++ enum net_prot start_hdr; ++ uint32_t options; ++ uint8_t max_senders; ++ uint8_t max_tcs; ++ uint8_t max_unicast_filters; ++ uint8_t max_multicast_filters; ++ uint8_t max_vlan_filters; ++ uint8_t max_qos_entries; ++ uint8_t max_qos_key_size; ++ uint8_t max_dist_key_size; ++ uint8_t max_policers; ++ uint8_t max_congestion_ctrl; ++ uint64_t ext_cfg_iova; ++}; ++ ++/** ++ * dpni_get_attributes() - Retrieve DPNI attributes. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @attr: Object's attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_attr *attr); ++ ++/** ++ * dpni_extract_extended_cfg() - extract the extended parameters ++ * @cfg: extended structure ++ * @ext_cfg_buf: 256 bytes of DMA-able memory ++ * ++ * This function has to be called after dpni_get_attributes() ++ */ ++int dpni_extract_extended_cfg(struct dpni_extended_cfg *cfg, ++ const uint8_t *ext_cfg_buf); ++ ++/** ++ * DPNI errors ++ */ ++ ++/** ++ * Extract out of frame header error ++ */ ++#define DPNI_ERROR_EOFHE 0x00020000 ++/** ++ * Frame length error ++ */ ++#define DPNI_ERROR_FLE 0x00002000 ++/** ++ * Frame physical error ++ */ ++#define DPNI_ERROR_FPE 0x00001000 ++/** ++ * Parsing header error ++ */ ++#define DPNI_ERROR_PHE 0x00000020 ++/** ++ * Parser L3 checksum error ++ */ ++#define DPNI_ERROR_L3CE 0x00000004 ++/** ++ * Parser L3 checksum error ++ */ ++#define DPNI_ERROR_L4CE 0x00000001 ++ ++/** ++ * enum dpni_error_action - Defines DPNI behavior for errors ++ * @DPNI_ERROR_ACTION_DISCARD: Discard the frame ++ * @DPNI_ERROR_ACTION_CONTINUE: Continue with the normal flow ++ * @DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE: Send the frame to the error queue ++ */ ++enum dpni_error_action { ++ DPNI_ERROR_ACTION_DISCARD = 0, ++ DPNI_ERROR_ACTION_CONTINUE = 1, ++ DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE = 2 ++}; ++ ++/** ++ * struct dpni_error_cfg - Structure representing DPNI errors treatment ++ * @errors: Errors mask; use 'DPNI_ERROR__ ++ * @error_action: The desired action for the errors mask ++ * @set_frame_annotation: Set to '1' to mark the errors in frame annotation ++ * status (FAS); relevant only for the non-discard action ++ */ ++struct dpni_error_cfg { ++ uint32_t errors; ++ enum dpni_error_action error_action; ++ int set_frame_annotation; ++}; ++ ++/** ++ * dpni_set_errors_behavior() - Set errors behavior ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @cfg: Errors configuration ++ * ++ * this function may be called numerous times with different ++ * error masks ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_errors_behavior(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_error_cfg *cfg); ++ ++/** ++ * DPNI buffer layout modification options ++ */ ++ ++/** ++ * Select to modify the time-stamp setting ++ */ ++#define DPNI_BUF_LAYOUT_OPT_TIMESTAMP 0x00000001 ++/** ++ * Select to modify the parser-result setting; not applicable for Tx ++ */ ++#define DPNI_BUF_LAYOUT_OPT_PARSER_RESULT 0x00000002 ++/** ++ * Select to modify the frame-status setting ++ */ ++#define DPNI_BUF_LAYOUT_OPT_FRAME_STATUS 0x00000004 ++/** ++ * Select to modify the private-data-size setting ++ */ ++#define DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE 0x00000008 ++/** ++ * Select to modify the data-alignment setting ++ */ ++#define DPNI_BUF_LAYOUT_OPT_DATA_ALIGN 0x00000010 ++/** ++ * Select to modify the data-head-room setting ++ */ ++#define DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM 0x00000020 ++/** ++ * Select to modify the data-tail-room setting ++ */ ++#define DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM 0x00000040 ++ ++/** ++ * struct dpni_buffer_layout - Structure representing DPNI buffer layout ++ * @options: Flags representing the suggested modifications to the buffer ++ * layout; Use any combination of 'DPNI_BUF_LAYOUT_OPT_' flags ++ * @pass_timestamp: Pass timestamp value ++ * @pass_parser_result: Pass parser results ++ * @pass_frame_status: Pass frame status ++ * @private_data_size: Size kept for private data (in bytes) ++ * @data_align: Data alignment ++ * @data_head_room: Data head room ++ * @data_tail_room: Data tail room ++ */ ++struct dpni_buffer_layout { ++ uint32_t options; ++ int pass_timestamp; ++ int pass_parser_result; ++ int pass_frame_status; ++ uint16_t private_data_size; ++ uint16_t data_align; ++ uint16_t data_head_room; ++ uint16_t data_tail_room; ++}; ++ ++/** ++ * dpni_get_rx_buffer_layout() - Retrieve Rx buffer layout attributes. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @layout: Returns buffer layout attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_rx_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_buffer_layout *layout); ++ ++/** ++ * dpni_set_rx_buffer_layout() - Set Rx buffer layout configuration. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @layout: Buffer layout configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ * ++ * @warning Allowed only when DPNI is disabled ++ */ ++int dpni_set_rx_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_buffer_layout *layout); ++ ++/** ++ * dpni_get_tx_buffer_layout() - Retrieve Tx buffer layout attributes. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @layout: Returns buffer layout attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_tx_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_buffer_layout *layout); ++ ++/** ++ * dpni_set_tx_buffer_layout() - Set Tx buffer layout configuration. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @layout: Buffer layout configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ * ++ * @warning Allowed only when DPNI is disabled ++ */ ++int dpni_set_tx_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_buffer_layout *layout); ++ ++/** ++ * dpni_get_tx_conf_buffer_layout() - Retrieve Tx confirmation buffer layout ++ * attributes. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @layout: Returns buffer layout attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_tx_conf_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_buffer_layout *layout); ++ ++/** ++ * dpni_set_tx_conf_buffer_layout() - Set Tx confirmation buffer layout ++ * configuration. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @layout: Buffer layout configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ * ++ * @warning Allowed only when DPNI is disabled ++ */ ++int dpni_set_tx_conf_buffer_layout(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_buffer_layout *layout); ++ ++/** ++ * dpni_set_l3_chksum_validation() - Enable/disable L3 checksum validation ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Set to '1' to enable; '0' to disable ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_l3_chksum_validation(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en); ++ ++/** ++ * dpni_get_l3_chksum_validation() - Get L3 checksum validation mode ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Returns '1' if enabled; '0' otherwise ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_l3_chksum_validation(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en); ++ ++/** ++ * dpni_set_l4_chksum_validation() - Enable/disable L4 checksum validation ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Set to '1' to enable; '0' to disable ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_l4_chksum_validation(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en); ++ ++/** ++ * dpni_get_l4_chksum_validation() - Get L4 checksum validation mode ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Returns '1' if enabled; '0' otherwise ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_l4_chksum_validation(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en); ++ ++/** ++ * dpni_get_qdid() - Get the Queuing Destination ID (QDID) that should be used ++ * for enqueue operations ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @qdid: Returned virtual QDID value that should be used as an argument ++ * in all enqueue operations ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_qdid(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *qdid); ++ ++/** ++ * struct dpni_sp_info - Structure representing DPNI storage-profile information ++ * (relevant only for DPNI owned by AIOP) ++ * @spids: array of storage-profiles ++ */ ++struct dpni_sp_info { ++ uint16_t spids[DPNI_MAX_SP]; ++}; ++ ++/** ++ * dpni_get_spids() - Get the AIOP storage profile IDs associated with the DPNI ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @sp_info: Returned AIOP storage-profile information ++ * ++ * Return: '0' on Success; Error code otherwise. ++ * ++ * @warning Only relevant for DPNI that belongs to AIOP container. ++ */ ++int dpni_get_sp_info(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_sp_info *sp_info); ++ ++/** ++ * dpni_get_tx_data_offset() - Get the Tx data offset (from start of buffer) ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @data_offset: Tx data offset (from start of buffer) ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *data_offset); ++ ++/** ++ * enum dpni_counter - DPNI counter types ++ * @DPNI_CNT_ING_FRAME: Counts ingress frames ++ * @DPNI_CNT_ING_BYTE: Counts ingress bytes ++ * @DPNI_CNT_ING_FRAME_DROP: Counts ingress frames dropped due to explicit ++ * 'drop' setting ++ * @DPNI_CNT_ING_FRAME_DISCARD: Counts ingress frames discarded due to errors ++ * @DPNI_CNT_ING_MCAST_FRAME: Counts ingress multicast frames ++ * @DPNI_CNT_ING_MCAST_BYTE: Counts ingress multicast bytes ++ * @DPNI_CNT_ING_BCAST_FRAME: Counts ingress broadcast frames ++ * @DPNI_CNT_ING_BCAST_BYTES: Counts ingress broadcast bytes ++ * @DPNI_CNT_EGR_FRAME: Counts egress frames ++ * @DPNI_CNT_EGR_BYTE: Counts egress bytes ++ * @DPNI_CNT_EGR_FRAME_DISCARD: Counts egress frames discarded due to errors ++ */ ++enum dpni_counter { ++ DPNI_CNT_ING_FRAME = 0x0, ++ DPNI_CNT_ING_BYTE = 0x1, ++ DPNI_CNT_ING_FRAME_DROP = 0x2, ++ DPNI_CNT_ING_FRAME_DISCARD = 0x3, ++ DPNI_CNT_ING_MCAST_FRAME = 0x4, ++ DPNI_CNT_ING_MCAST_BYTE = 0x5, ++ DPNI_CNT_ING_BCAST_FRAME = 0x6, ++ DPNI_CNT_ING_BCAST_BYTES = 0x7, ++ DPNI_CNT_EGR_FRAME = 0x8, ++ DPNI_CNT_EGR_BYTE = 0x9, ++ DPNI_CNT_EGR_FRAME_DISCARD = 0xa ++}; ++ ++/** ++ * dpni_get_counter() - Read a specific DPNI counter ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @counter: The requested counter ++ * @value: Returned counter's current value ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ enum dpni_counter counter, ++ uint64_t *value); ++ ++/** ++ * dpni_set_counter() - Set (or clear) a specific DPNI counter ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @counter: The requested counter ++ * @value: New counter value; typically pass '0' for resetting ++ * the counter. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ enum dpni_counter counter, ++ uint64_t value); ++ ++/** ++ * Enable auto-negotiation ++ */ ++#define DPNI_LINK_OPT_AUTONEG 0x0000000000000001ULL ++/** ++ * Enable half-duplex mode ++ */ ++#define DPNI_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL ++/** ++ * Enable pause frames ++ */ ++#define DPNI_LINK_OPT_PAUSE 0x0000000000000004ULL ++/** ++ * Enable a-symmetric pause frames ++ */ ++#define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL ++ ++/** ++ * struct - Structure representing DPNI link configuration ++ * @rate: Rate ++ * @options: Mask of available options; use 'DPNI_LINK_OPT_' values ++ */ ++struct dpni_link_cfg { ++ uint32_t rate; ++ uint64_t options; ++}; ++ ++/** ++ * dpni_set_link_cfg() - set the link configuration. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @cfg: Link configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_link_cfg(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_link_cfg *cfg); ++ ++/** ++ * struct dpni_link_state - Structure representing DPNI link state ++ * @rate: Rate ++ * @options: Mask of available options; use 'DPNI_LINK_OPT_' values ++ * @up: Link state; '0' for down, '1' for up ++ */ ++struct dpni_link_state { ++ uint32_t rate; ++ uint64_t options; ++ int up; ++}; ++ ++/** ++ * dpni_get_link_state() - Return the link state (either up or down) ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @state: Returned link state; ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_link_state(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_link_state *state); ++ ++/** ++ * struct dpni_tx_shaping - Structure representing DPNI tx shaping configuration ++ * @rate_limit: rate in Mbps ++ * @max_burst_size: burst size in bytes (up to 64KB) ++ */ ++struct dpni_tx_shaping_cfg { ++ uint32_t rate_limit; ++ uint16_t max_burst_size; ++}; ++ ++/** ++ * dpni_set_tx_shaping() - Set the transmit shaping ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tx_shaper: tx shaping configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_tx_shaping(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_tx_shaping_cfg *tx_shaper); ++ ++/** ++ * dpni_set_max_frame_length() - Set the maximum received frame length. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @max_frame_length: Maximum received frame length (in ++ * bytes); frame is discarded if its ++ * length exceeds this value ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t max_frame_length); ++ ++/** ++ * dpni_get_max_frame_length() - Get the maximum received frame length. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @max_frame_length: Maximum received frame length (in ++ * bytes); frame is discarded if its ++ * length exceeds this value ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *max_frame_length); ++ ++/** ++ * dpni_set_mtu() - Set the MTU for the interface. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @mtu: MTU length (in bytes) ++ * ++ * MTU determines the maximum fragment size for performing IP ++ * fragmentation on egress packets. ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_mtu(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t mtu); ++ ++/** ++ * dpni_get_mtu() - Get the MTU. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @mtu: Returned MTU length (in bytes) ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_mtu(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *mtu); ++ ++/** ++ * dpni_set_multicast_promisc() - Enable/disable multicast promiscuous mode ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Set to '1' to enable; '0' to disable ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_multicast_promisc(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en); ++ ++/** ++ * dpni_get_multicast_promisc() - Get multicast promiscuous mode ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Returns '1' if enabled; '0' otherwise ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_multicast_promisc(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en); ++ ++/** ++ * dpni_set_unicast_promisc() - Enable/disable unicast promiscuous mode ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Set to '1' to enable; '0' to disable ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_unicast_promisc(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en); ++ ++/** ++ * dpni_get_unicast_promisc() - Get unicast promiscuous mode ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Returns '1' if enabled; '0' otherwise ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_unicast_promisc(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en); ++ ++/** ++ * dpni_set_primary_mac_addr() - Set the primary MAC address ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @mac_addr: MAC address to set as primary address ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const uint8_t mac_addr[6]); ++ ++/** ++ * dpni_get_primary_mac_addr() - Get the primary MAC address ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @mac_addr: Returned MAC address ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t mac_addr[6]); ++ ++/** ++ * dpni_add_mac_addr() - Add MAC address filter ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @mac_addr: MAC address to add ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_add_mac_addr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const uint8_t mac_addr[6]); ++ ++/** ++ * dpni_remove_mac_addr() - Remove MAC address filter ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @mac_addr: MAC address to remove ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_remove_mac_addr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const uint8_t mac_addr[6]); ++ ++/** ++ * dpni_clear_mac_filters() - Clear all unicast and/or multicast MAC filters ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @unicast: Set to '1' to clear unicast addresses ++ * @multicast: Set to '1' to clear multicast addresses ++ * ++ * The primary MAC address is not cleared by this operation. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_clear_mac_filters(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int unicast, ++ int multicast); ++ ++/** ++ * dpni_set_vlan_filters() - Enable/disable VLAN filtering mode ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Set to '1' to enable; '0' to disable ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_vlan_filters(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en); ++ ++/** ++ * dpni_add_vlan_id() - Add VLAN ID filter ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @vlan_id: VLAN ID to add ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_add_vlan_id(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id); ++ ++/** ++ * dpni_remove_vlan_id() - Remove VLAN ID filter ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @vlan_id: VLAN ID to remove ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_remove_vlan_id(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id); ++ ++/** ++ * dpni_clear_vlan_filters() - Clear all VLAN filters ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_clear_vlan_filters(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * enum dpni_tx_schedule_mode - DPNI Tx scheduling mode ++ * @DPNI_TX_SCHED_STRICT_PRIORITY: strict priority ++ * @DPNI_TX_SCHED_WEIGHTED: weighted based scheduling ++ */ ++enum dpni_tx_schedule_mode { ++ DPNI_TX_SCHED_STRICT_PRIORITY, ++ DPNI_TX_SCHED_WEIGHTED, ++}; ++ ++/** ++ * struct dpni_tx_schedule_cfg - Structure representing Tx ++ * scheduling configuration ++ * @mode: scheduling mode ++ * @delta_bandwidth: Bandwidth represented in weights from 100 to 10000; ++ * not applicable for 'strict-priority' mode; ++ */ ++struct dpni_tx_schedule_cfg { ++ enum dpni_tx_schedule_mode mode; ++ uint16_t delta_bandwidth; ++}; ++ ++/** ++ * struct dpni_tx_selection_cfg - Structure representing transmission ++ * selection configuration ++ * @tc_sched: an array of traffic-classes ++ */ ++struct dpni_tx_selection_cfg { ++ struct dpni_tx_schedule_cfg tc_sched[DPNI_MAX_TC]; ++}; ++ ++/** ++ * dpni_set_tx_selection() - Set transmission selection configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @cfg: transmission selection configuration ++ * ++ * warning: Allowed only when DPNI is disabled ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_tx_selection(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_tx_selection_cfg *cfg); ++ ++/** ++ * enum dpni_dist_mode - DPNI distribution mode ++ * @DPNI_DIST_MODE_NONE: No distribution ++ * @DPNI_DIST_MODE_HASH: Use hash distribution; only relevant if ++ * the 'DPNI_OPT_DIST_HASH' option was set at DPNI creation ++ * @DPNI_DIST_MODE_FS: Use explicit flow steering; only relevant if ++ * the 'DPNI_OPT_DIST_FS' option was set at DPNI creation ++ */ ++enum dpni_dist_mode { ++ DPNI_DIST_MODE_NONE = 0, ++ DPNI_DIST_MODE_HASH = 1, ++ DPNI_DIST_MODE_FS = 2 ++}; ++ ++/** ++ * enum dpni_fs_miss_action - DPNI Flow Steering miss action ++ * @DPNI_FS_MISS_DROP: In case of no-match, drop the frame ++ * @DPNI_FS_MISS_EXPLICIT_FLOWID: In case of no-match, use explicit flow-id ++ * @DPNI_FS_MISS_HASH: In case of no-match, distribute using hash ++ */ ++enum dpni_fs_miss_action { ++ DPNI_FS_MISS_DROP = 0, ++ DPNI_FS_MISS_EXPLICIT_FLOWID = 1, ++ DPNI_FS_MISS_HASH = 2 ++}; ++ ++/** ++ * struct dpni_fs_tbl_cfg - Flow Steering table configuration ++ * @miss_action: Miss action selection ++ * @default_flow_id: Used when 'miss_action = DPNI_FS_MISS_EXPLICIT_FLOWID' ++ */ ++struct dpni_fs_tbl_cfg { ++ enum dpni_fs_miss_action miss_action; ++ uint16_t default_flow_id; ++}; ++ ++/** ++ * dpni_prepare_key_cfg() - function prepare extract parameters ++ * @cfg: defining a full Key Generation profile (rule) ++ * @key_cfg_buf: Zeroed 256 bytes of memory before mapping it to DMA ++ * ++ * This function has to be called before the following functions: ++ * - dpni_set_rx_tc_dist() ++ * - dpni_set_qos_table() ++ */ ++int dpni_prepare_key_cfg(const struct dpkg_profile_cfg *cfg, ++ uint8_t *key_cfg_buf); ++ ++/** ++ * struct dpni_rx_tc_dist_cfg - Rx traffic class distribution configuration ++ * @dist_size: Set the distribution size; ++ * supported values: 1,2,3,4,6,7,8,12,14,16,24,28,32,48,56,64,96, ++ * 112,128,192,224,256,384,448,512,768,896,1024 ++ * @dist_mode: Distribution mode ++ * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with ++ * the extractions to be used for the distribution key by calling ++ * dpni_prepare_key_cfg() relevant only when ++ * 'dist_mode != DPNI_DIST_MODE_NONE', otherwise it can be '0' ++ * @fs_cfg: Flow Steering table configuration; only relevant if ++ * 'dist_mode = DPNI_DIST_MODE_FS' ++ */ ++struct dpni_rx_tc_dist_cfg { ++ uint16_t dist_size; ++ enum dpni_dist_mode dist_mode; ++ uint64_t key_cfg_iova; ++ struct dpni_fs_tbl_cfg fs_cfg; ++}; ++ ++/** ++ * dpni_set_rx_tc_dist() - Set Rx traffic class distribution configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: Traffic class distribution configuration ++ * ++ * warning: if 'dist_mode != DPNI_DIST_MODE_NONE', call dpni_prepare_key_cfg() ++ * first to prepare the key_cfg_iova parameter ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_set_rx_tc_dist(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_rx_tc_dist_cfg *cfg); ++ ++/** ++ * Set to select color aware mode (otherwise - color blind) ++ */ ++#define DPNI_POLICER_OPT_COLOR_AWARE 0x00000001 ++/** ++ * Set to discard frame with RED color ++ */ ++#define DPNI_POLICER_OPT_DISCARD_RED 0x00000002 ++ ++/** ++ * enum dpni_policer_mode - selecting the policer mode ++ * @DPNI_POLICER_MODE_NONE: Policer is disabled ++ * @DPNI_POLICER_MODE_PASS_THROUGH: Policer pass through ++ * @DPNI_POLICER_MODE_RFC_2698: Policer algorithm RFC 2698 ++ * @DPNI_POLICER_MODE_RFC_4115: Policer algorithm RFC 4115 ++ */ ++enum dpni_policer_mode { ++ DPNI_POLICER_MODE_NONE = 0, ++ DPNI_POLICER_MODE_PASS_THROUGH, ++ DPNI_POLICER_MODE_RFC_2698, ++ DPNI_POLICER_MODE_RFC_4115 ++}; ++ ++/** ++ * enum dpni_policer_unit - DPNI policer units ++ * @DPNI_POLICER_UNIT_BYTES: bytes units ++ * @DPNI_POLICER_UNIT_FRAMES: frames units ++ */ ++enum dpni_policer_unit { ++ DPNI_POLICER_UNIT_BYTES = 0, ++ DPNI_POLICER_UNIT_FRAMES ++}; ++ ++/** ++ * enum dpni_policer_color - selecting the policer color ++ * @DPNI_POLICER_COLOR_GREEN: Green color ++ * @DPNI_POLICER_COLOR_YELLOW: Yellow color ++ * @DPNI_POLICER_COLOR_RED: Red color ++ */ ++enum dpni_policer_color { ++ DPNI_POLICER_COLOR_GREEN = 0, ++ DPNI_POLICER_COLOR_YELLOW, ++ DPNI_POLICER_COLOR_RED ++}; ++ ++/** ++ * struct dpni_rx_tc_policing_cfg - Policer configuration ++ * @options: Mask of available options; use 'DPNI_POLICER_OPT_' values ++ * @mode: policer mode ++ * @default_color: For pass-through mode the policer re-colors with this ++ * color any incoming packets. For Color aware non-pass-through mode: ++ * policer re-colors with this color all packets with FD[DROPP]>2. ++ * @units: Bytes or Packets ++ * @cir: Committed information rate (CIR) in Kbps or packets/second ++ * @cbs: Committed burst size (CBS) in bytes or packets ++ * @eir: Peak information rate (PIR, rfc2698) in Kbps or packets/second ++ * Excess information rate (EIR, rfc4115) in Kbps or packets/second ++ * @ebs: Peak burst size (PBS, rfc2698) in bytes or packets ++ * Excess burst size (EBS, rfc4115) in bytes or packets ++ */ ++struct dpni_rx_tc_policing_cfg { ++ uint32_t options; ++ enum dpni_policer_mode mode; ++ enum dpni_policer_unit units; ++ enum dpni_policer_color default_color; ++ uint32_t cir; ++ uint32_t cbs; ++ uint32_t eir; ++ uint32_t ebs; ++}; ++ ++/** ++ * dpni_set_rx_tc_policing() - Set Rx traffic class policing configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: Traffic class policing configuration ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_set_rx_tc_policing(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_rx_tc_policing_cfg *cfg); ++ ++/** ++ * dpni_get_rx_tc_policing() - Get Rx traffic class policing configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: Traffic class policing configuration ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_get_rx_tc_policing(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ struct dpni_rx_tc_policing_cfg *cfg); ++ ++/** ++ * enum dpni_congestion_unit - DPNI congestion units ++ * @DPNI_CONGESTION_UNIT_BYTES: bytes units ++ * @DPNI_CONGESTION_UNIT_FRAMES: frames units ++ */ ++enum dpni_congestion_unit { ++ DPNI_CONGESTION_UNIT_BYTES = 0, ++ DPNI_CONGESTION_UNIT_FRAMES ++}; ++ ++/** ++ * enum dpni_early_drop_mode - DPNI early drop mode ++ * @DPNI_EARLY_DROP_MODE_NONE: early drop is disabled ++ * @DPNI_EARLY_DROP_MODE_TAIL: early drop in taildrop mode ++ * @DPNI_EARLY_DROP_MODE_WRED: early drop in WRED mode ++ */ ++enum dpni_early_drop_mode { ++ DPNI_EARLY_DROP_MODE_NONE = 0, ++ DPNI_EARLY_DROP_MODE_TAIL, ++ DPNI_EARLY_DROP_MODE_WRED ++}; ++ ++/** ++ * struct dpni_wred_cfg - WRED configuration ++ * @max_threshold: maximum threshold that packets may be discarded. Above this ++ * threshold all packets are discarded; must be less than 2^39; ++ * approximated to be expressed as (x+256)*2^(y-1) due to HW ++ * implementation. ++ * @min_threshold: minimum threshold that packets may be discarded at ++ * @drop_probability: probability that a packet will be discarded (1-100, ++ * associated with the max_threshold). ++ */ ++struct dpni_wred_cfg { ++ uint64_t max_threshold; ++ uint64_t min_threshold; ++ uint8_t drop_probability; ++}; ++ ++/** ++ * struct dpni_early_drop_cfg - early-drop configuration ++ * @mode: drop mode ++ * @units: units type ++ * @green: WRED - 'green' configuration ++ * @yellow: WRED - 'yellow' configuration ++ * @red: WRED - 'red' configuration ++ * @tail_drop_threshold: tail drop threshold ++ */ ++struct dpni_early_drop_cfg { ++ enum dpni_early_drop_mode mode; ++ enum dpni_congestion_unit units; ++ ++ struct dpni_wred_cfg green; ++ struct dpni_wred_cfg yellow; ++ struct dpni_wred_cfg red; ++ ++ uint32_t tail_drop_threshold; ++}; ++ ++/** ++ * dpni_prepare_early_drop() - prepare an early drop. ++ * @cfg: Early-drop configuration ++ * @early_drop_buf: Zeroed 256 bytes of memory before mapping it to DMA ++ * ++ * This function has to be called before dpni_set_rx_tc_early_drop or ++ * dpni_set_tx_tc_early_drop ++ * ++ */ ++void dpni_prepare_early_drop(const struct dpni_early_drop_cfg *cfg, ++ uint8_t *early_drop_buf); ++ ++/** ++ * dpni_extract_early_drop() - extract the early drop configuration. ++ * @cfg: Early-drop configuration ++ * @early_drop_buf: Zeroed 256 bytes of memory before mapping it to DMA ++ * ++ * This function has to be called after dpni_get_rx_tc_early_drop or ++ * dpni_get_tx_tc_early_drop ++ * ++ */ ++void dpni_extract_early_drop(struct dpni_early_drop_cfg *cfg, ++ const uint8_t *early_drop_buf); ++ ++/** ++ * dpni_set_rx_tc_early_drop() - Set Rx traffic class early-drop configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @early_drop_iova: I/O virtual address of 256 bytes DMA-able memory filled ++ * with the early-drop configuration by calling dpni_prepare_early_drop() ++ * ++ * warning: Before calling this function, call dpni_prepare_early_drop() to ++ * prepare the early_drop_iova parameter ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_set_rx_tc_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint64_t early_drop_iova); ++ ++/** ++ * dpni_get_rx_tc_early_drop() - Get Rx traffic class early-drop configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @early_drop_iova: I/O virtual address of 256 bytes DMA-able memory ++ * ++ * warning: After calling this function, call dpni_extract_early_drop() to ++ * get the early drop configuration ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_get_rx_tc_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint64_t early_drop_iova); ++ ++/** ++ * dpni_set_tx_tc_early_drop() - Set Tx traffic class early-drop configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @early_drop_iova: I/O virtual address of 256 bytes DMA-able memory filled ++ * with the early-drop configuration by calling dpni_prepare_early_drop() ++ * ++ * warning: Before calling this function, call dpni_prepare_early_drop() to ++ * prepare the early_drop_iova parameter ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_set_tx_tc_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint64_t early_drop_iova); ++ ++/** ++ * dpni_get_tx_tc_early_drop() - Get Tx traffic class early-drop configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @early_drop_iova: I/O virtual address of 256 bytes DMA-able memory ++ * ++ * warning: After calling this function, call dpni_extract_early_drop() to ++ * get the early drop configuration ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_get_tx_tc_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint64_t early_drop_iova); ++ ++/** ++ * enum dpni_dest - DPNI destination types ++ * @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and ++ * does not generate FQDAN notifications; user is expected to ++ * dequeue from the queue based on polling or other user-defined ++ * method ++ * @DPNI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN ++ * notifications to the specified DPIO; user is expected to dequeue ++ * from the queue only after notification is received ++ * @DPNI_DEST_DPCON: The queue is set in schedule mode and does not generate ++ * FQDAN notifications, but is connected to the specified DPCON ++ * object; user is expected to dequeue from the DPCON channel ++ */ ++enum dpni_dest { ++ DPNI_DEST_NONE = 0, ++ DPNI_DEST_DPIO = 1, ++ DPNI_DEST_DPCON = 2 ++}; ++ ++/** ++ * struct dpni_dest_cfg - Structure representing DPNI destination parameters ++ * @dest_type: Destination type ++ * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type ++ * @priority: Priority selection within the DPIO or DPCON channel; valid values ++ * are 0-1 or 0-7, depending on the number of priorities in that ++ * channel; not relevant for 'DPNI_DEST_NONE' option ++ */ ++struct dpni_dest_cfg { ++ enum dpni_dest dest_type; ++ int dest_id; ++ uint8_t priority; ++}; ++ ++/* DPNI congestion options */ ++ ++/** ++ * CSCN message is written to message_iova once entering a ++ * congestion state (see 'threshold_entry') ++ */ ++#define DPNI_CONG_OPT_WRITE_MEM_ON_ENTER 0x00000001 ++/** ++ * CSCN message is written to message_iova once exiting a ++ * congestion state (see 'threshold_exit') ++ */ ++#define DPNI_CONG_OPT_WRITE_MEM_ON_EXIT 0x00000002 ++/** ++ * CSCN write will attempt to allocate into a cache (coherent write); ++ * valid only if 'DPNI_CONG_OPT_WRITE_MEM_' is selected ++ */ ++#define DPNI_CONG_OPT_COHERENT_WRITE 0x00000004 ++/** ++ * if 'dest_cfg.dest_type != DPNI_DEST_NONE' CSCN message is sent to ++ * DPIO/DPCON's WQ channel once entering a congestion state ++ * (see 'threshold_entry') ++ */ ++#define DPNI_CONG_OPT_NOTIFY_DEST_ON_ENTER 0x00000008 ++/** ++ * if 'dest_cfg.dest_type != DPNI_DEST_NONE' CSCN message is sent to ++ * DPIO/DPCON's WQ channel once exiting a congestion state ++ * (see 'threshold_exit') ++ */ ++#define DPNI_CONG_OPT_NOTIFY_DEST_ON_EXIT 0x00000010 ++/** ++ * if 'dest_cfg.dest_type != DPNI_DEST_NONE' when the CSCN is written to the ++ * sw-portal's DQRR, the DQRI interrupt is asserted immediately (if enabled) ++ */ ++#define DPNI_CONG_OPT_INTR_COALESCING_DISABLED 0x00000020 ++ ++/** ++ * struct dpni_congestion_notification_cfg - congestion notification ++ * configuration ++ * @units: units type ++ * @threshold_entry: above this threshold we enter a congestion state. ++ * set it to '0' to disable it ++ * @threshold_exit: below this threshold we exit the congestion state. ++ * @message_ctx: The context that will be part of the CSCN message ++ * @message_iova: I/O virtual address (must be in DMA-able memory), ++ * must be 16B aligned; valid only if 'DPNI_CONG_OPT_WRITE_MEM_' is ++ * contained in 'options' ++ * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel ++ * @options: Mask of available options; use 'DPNI_CONG_OPT_' values ++ */ ++ ++struct dpni_congestion_notification_cfg { ++ enum dpni_congestion_unit units; ++ uint32_t threshold_entry; ++ uint32_t threshold_exit; ++ uint64_t message_ctx; ++ uint64_t message_iova; ++ struct dpni_dest_cfg dest_cfg; ++ uint16_t options; ++}; ++ ++/** ++ * dpni_set_rx_tc_congestion_notification() - Set Rx traffic class congestion ++ * notification configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: congestion notification configuration ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_set_rx_tc_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_congestion_notification_cfg *cfg); ++ ++/** ++ * dpni_get_rx_tc_congestion_notification() - Get Rx traffic class congestion ++ * notification configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: congestion notification configuration ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_get_rx_tc_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ struct dpni_congestion_notification_cfg *cfg); ++ ++/** ++ * dpni_set_tx_tc_congestion_notification() - Set Tx traffic class congestion ++ * notification configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: congestion notification configuration ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_set_tx_tc_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_congestion_notification_cfg *cfg); ++ ++/** ++ * dpni_get_tx_tc_congestion_notification() - Get Tx traffic class congestion ++ * notification configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: congestion notification configuration ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_get_tx_tc_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ struct dpni_congestion_notification_cfg *cfg); ++ ++/** ++ * enum dpni_flc_type - DPNI FLC types ++ * @DPNI_FLC_USER_DEFINED: select the FLC to be used for user defined value ++ * @DPNI_FLC_STASH: select the FLC to be used for stash control ++ */ ++enum dpni_flc_type { ++ DPNI_FLC_USER_DEFINED = 0, ++ DPNI_FLC_STASH = 1, ++}; ++ ++/** ++ * enum dpni_stash_size - DPNI FLC stashing size ++ * @DPNI_STASH_SIZE_0B: no stash ++ * @DPNI_STASH_SIZE_64B: stashes 64 bytes ++ * @DPNI_STASH_SIZE_128B: stashes 128 bytes ++ * @DPNI_STASH_SIZE_192B: stashes 192 bytes ++ */ ++enum dpni_stash_size { ++ DPNI_STASH_SIZE_0B = 0, ++ DPNI_STASH_SIZE_64B = 1, ++ DPNI_STASH_SIZE_128B = 2, ++ DPNI_STASH_SIZE_192B = 3, ++}; ++ ++/* DPNI FLC stash options */ ++ ++/** ++ * stashes the whole annotation area (up to 192 bytes) ++ */ ++#define DPNI_FLC_STASH_FRAME_ANNOTATION 0x00000001 ++ ++/** ++ * struct dpni_flc_cfg - Structure representing DPNI FLC configuration ++ * @flc_type: FLC type ++ * @options: Mask of available options; ++ * use 'DPNI_FLC_STASH_' values ++ * @frame_data_size: Size of frame data to be stashed ++ * @flow_context_size: Size of flow context to be stashed ++ * @flow_context: 1. In case flc_type is 'DPNI_FLC_USER_DEFINED': ++ * this value will be provided in the frame descriptor ++ * (FD[FLC]) ++ * 2. In case flc_type is 'DPNI_FLC_STASH': ++ * this value will be I/O virtual address of the ++ * flow-context; ++ * Must be cacheline-aligned and DMA-able memory ++ */ ++struct dpni_flc_cfg { ++ enum dpni_flc_type flc_type; ++ uint32_t options; ++ enum dpni_stash_size frame_data_size; ++ enum dpni_stash_size flow_context_size; ++ uint64_t flow_context; ++}; ++ ++/** ++ * DPNI queue modification options ++ */ ++ ++/** ++ * Select to modify the user's context associated with the queue ++ */ ++#define DPNI_QUEUE_OPT_USER_CTX 0x00000001 ++/** ++ * Select to modify the queue's destination ++ */ ++#define DPNI_QUEUE_OPT_DEST 0x00000002 ++/** Select to modify the flow-context parameters; ++ * not applicable for Tx-conf/Err queues as the FD comes from the user ++ */ ++#define DPNI_QUEUE_OPT_FLC 0x00000004 ++/** ++ * Select to modify the queue's order preservation ++ */ ++#define DPNI_QUEUE_OPT_ORDER_PRESERVATION 0x00000008 ++/* Select to modify the queue's tail-drop threshold */ ++#define DPNI_QUEUE_OPT_TAILDROP_THRESHOLD 0x00000010 ++ ++/** ++ * struct dpni_queue_cfg - Structure representing queue configuration ++ * @options: Flags representing the suggested modifications to the queue; ++ * Use any combination of 'DPNI_QUEUE_OPT_' flags ++ * @user_ctx: User context value provided in the frame descriptor of each ++ * dequeued frame; valid only if 'DPNI_QUEUE_OPT_USER_CTX' ++ * is contained in 'options' ++ * @dest_cfg: Queue destination parameters; ++ * valid only if 'DPNI_QUEUE_OPT_DEST' is contained in 'options' ++ * @flc_cfg: Flow context configuration; in case the TC's distribution ++ * is either NONE or HASH the FLC's settings of flow#0 are used. ++ * in the case of FS (flow-steering) the flow's FLC settings ++ * are used. ++ * valid only if 'DPNI_QUEUE_OPT_FLC' is contained in 'options' ++ * @order_preservation_en: enable/disable order preservation; ++ * valid only if 'DPNI_QUEUE_OPT_ORDER_PRESERVATION' is contained ++ * in 'options' ++ * @tail_drop_threshold: set the queue's tail drop threshold in bytes; ++ * '0' value disable the threshold; maximum value is 0xE000000; ++ * valid only if 'DPNI_QUEUE_OPT_TAILDROP_THRESHOLD' is contained ++ * in 'options' ++ */ ++struct dpni_queue_cfg { ++ uint32_t options; ++ uint64_t user_ctx; ++ struct dpni_dest_cfg dest_cfg; ++ struct dpni_flc_cfg flc_cfg; ++ int order_preservation_en; ++ uint32_t tail_drop_threshold; ++}; ++ ++/** ++ * struct dpni_queue_attr - Structure representing queue attributes ++ * @user_ctx: User context value provided in the frame descriptor of each ++ * dequeued frame ++ * @dest_cfg: Queue destination configuration ++ * @flc_cfg: Flow context configuration ++ * @order_preservation_en: enable/disable order preservation ++ * @tail_drop_threshold: queue's tail drop threshold in bytes; ++ * @fqid: Virtual fqid value to be used for dequeue operations ++ */ ++struct dpni_queue_attr { ++ uint64_t user_ctx; ++ struct dpni_dest_cfg dest_cfg; ++ struct dpni_flc_cfg flc_cfg; ++ int order_preservation_en; ++ uint32_t tail_drop_threshold; ++ ++ uint32_t fqid; ++}; ++ ++/** ++ * DPNI Tx flow modification options ++ */ ++ ++/** ++ * Select to modify the settings for dedicate Tx confirmation/error ++ */ ++#define DPNI_TX_FLOW_OPT_TX_CONF_ERROR 0x00000001 ++/** ++ * Select to modify the L3 checksum generation setting ++ */ ++#define DPNI_TX_FLOW_OPT_L3_CHKSUM_GEN 0x00000010 ++/** ++ * Select to modify the L4 checksum generation setting ++ */ ++#define DPNI_TX_FLOW_OPT_L4_CHKSUM_GEN 0x00000020 ++ ++/** ++ * struct dpni_tx_flow_cfg - Structure representing Tx flow configuration ++ * @options: Flags representing the suggested modifications to the Tx flow; ++ * Use any combination 'DPNI_TX_FLOW_OPT_' flags ++ * @use_common_tx_conf_queue: Set to '1' to use the common (default) Tx ++ * confirmation and error queue; Set to '0' to use the private ++ * Tx confirmation and error queue; valid only if ++ * 'DPNI_OPT_PRIVATE_TX_CONF_ERROR_DISABLED' wasn't set at DPNI creation ++ * and 'DPNI_TX_FLOW_OPT_TX_CONF_ERROR' is contained in 'options' ++ * @l3_chksum_gen: Set to '1' to enable L3 checksum generation; '0' to disable; ++ * valid only if 'DPNI_TX_FLOW_OPT_L3_CHKSUM_GEN' is contained in 'options' ++ * @l4_chksum_gen: Set to '1' to enable L4 checksum generation; '0' to disable; ++ * valid only if 'DPNI_TX_FLOW_OPT_L4_CHKSUM_GEN' is contained in 'options' ++ */ ++struct dpni_tx_flow_cfg { ++ uint32_t options; ++ int use_common_tx_conf_queue; ++ int l3_chksum_gen; ++ int l4_chksum_gen; ++}; ++ ++/** ++ * dpni_set_tx_flow() - Set Tx flow configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @flow_id: Provides (or returns) the sender's flow ID; ++ * for each new sender set (*flow_id) to 'DPNI_NEW_FLOW_ID' to generate ++ * a new flow_id; this ID should be used as the QDBIN argument ++ * in enqueue operations ++ * @cfg: Tx flow configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_tx_flow(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *flow_id, ++ const struct dpni_tx_flow_cfg *cfg); ++ ++/** ++ * struct dpni_tx_flow_attr - Structure representing Tx flow attributes ++ * @use_common_tx_conf_queue: '1' if using common (default) Tx confirmation and ++ * error queue; '0' if using private Tx confirmation and error queue ++ * @l3_chksum_gen: '1' if L3 checksum generation is enabled; '0' if disabled ++ * @l4_chksum_gen: '1' if L4 checksum generation is enabled; '0' if disabled ++ */ ++struct dpni_tx_flow_attr { ++ int use_common_tx_conf_queue; ++ int l3_chksum_gen; ++ int l4_chksum_gen; ++}; ++ ++/** ++ * dpni_get_tx_flow() - Get Tx flow attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @flow_id: The sender's flow ID, as returned by the ++ * dpni_set_tx_flow() function ++ * @attr: Returned Tx flow attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_tx_flow(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ struct dpni_tx_flow_attr *attr); ++ ++/** ++ * struct dpni_tx_conf_cfg - Structure representing Tx conf configuration ++ * @errors_only: Set to '1' to report back only error frames; ++ * Set to '0' to confirm transmission/error for all transmitted frames; ++ * @queue_cfg: Queue configuration ++ */ ++struct dpni_tx_conf_cfg { ++ int errors_only; ++ struct dpni_queue_cfg queue_cfg; ++}; ++ ++/** ++ * dpni_set_tx_conf() - Set Tx confirmation and error queue configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @flow_id: The sender's flow ID, as returned by the ++ * dpni_set_tx_flow() function; ++ * use 'DPNI_COMMON_TX_CONF' for common tx-conf ++ * @cfg: Queue configuration ++ * ++ * If either 'DPNI_OPT_TX_CONF_DISABLED' or ++ * 'DPNI_OPT_PRIVATE_TX_CONF_ERROR_DISABLED' were selected at DPNI creation, ++ * this function can ONLY be used with 'flow_id == DPNI_COMMON_TX_CONF'; ++ * i.e. only serve the common tx-conf-err queue; ++ * if 'DPNI_OPT_TX_CONF_DISABLED' was selected, only error frames are reported ++ * back - successfully transmitted frames are not confirmed. Otherwise, all ++ * transmitted frames are sent for confirmation. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_tx_conf(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ const struct dpni_tx_conf_cfg *cfg); ++ ++/** ++ * struct dpni_tx_conf_attr - Structure representing Tx conf attributes ++ * @errors_only: '1' if only error frames are reported back; '0' if all ++ * transmitted frames are confirmed ++ * @queue_attr: Queue attributes ++ */ ++struct dpni_tx_conf_attr { ++ int errors_only; ++ struct dpni_queue_attr queue_attr; ++}; ++ ++/** ++ * dpni_get_tx_conf() - Get Tx confirmation and error queue attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @flow_id: The sender's flow ID, as returned by the ++ * dpni_set_tx_flow() function; ++ * use 'DPNI_COMMON_TX_CONF' for common tx-conf ++ * @attr: Returned tx-conf attributes ++ * ++ * If either 'DPNI_OPT_TX_CONF_DISABLED' or ++ * 'DPNI_OPT_PRIVATE_TX_CONF_ERROR_DISABLED' were selected at DPNI creation, ++ * this function can ONLY be used with 'flow_id == DPNI_COMMON_TX_CONF'; ++ * i.e. only serve the common tx-conf-err queue; ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_tx_conf(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ struct dpni_tx_conf_attr *attr); ++ ++/** ++ * dpni_set_tx_conf_congestion_notification() - Set Tx conf congestion ++ * notification configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @flow_id: The sender's flow ID, as returned by the ++ * dpni_set_tx_flow() function; ++ * use 'DPNI_COMMON_TX_CONF' for common tx-conf ++ * @cfg: congestion notification configuration ++ * ++ * If either 'DPNI_OPT_TX_CONF_DISABLED' or ++ * 'DPNI_OPT_PRIVATE_TX_CONF_ERROR_DISABLED' were selected at DPNI creation, ++ * this function can ONLY be used with 'flow_id == DPNI_COMMON_TX_CONF'; ++ * i.e. only serve the common tx-conf-err queue; ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_set_tx_conf_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ const struct dpni_congestion_notification_cfg *cfg); ++ ++/** ++ * dpni_get_tx_conf_congestion_notification() - Get Tx conf congestion ++ * notification configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @flow_id: The sender's flow ID, as returned by the ++ * dpni_set_tx_flow() function; ++ * use 'DPNI_COMMON_TX_CONF' for common tx-conf ++ * @cfg: congestion notification ++ * ++ * If either 'DPNI_OPT_TX_CONF_DISABLED' or ++ * 'DPNI_OPT_PRIVATE_TX_CONF_ERROR_DISABLED' were selected at DPNI creation, ++ * this function can ONLY be used with 'flow_id == DPNI_COMMON_TX_CONF'; ++ * i.e. only serve the common tx-conf-err queue; ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpni_get_tx_conf_congestion_notification(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t flow_id, ++ struct dpni_congestion_notification_cfg *cfg); ++ ++/** ++ * dpni_set_tx_conf_revoke() - Tx confirmation revocation ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @revoke: revoke or not ++ * ++ * This function is useful only when 'DPNI_OPT_TX_CONF_DISABLED' is not ++ * selected at DPNI creation. ++ * Calling this function with 'revoke' set to '1' disables all transmit ++ * confirmation (including the private confirmation queues), regardless of ++ * previous settings; Note that in this case, Tx error frames are still ++ * enqueued to the general transmit errors queue. ++ * Calling this function with 'revoke' set to '0' restores the previous ++ * settings for both general and private transmit confirmation. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_tx_conf_revoke(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int revoke); ++ ++/** ++ * dpni_set_rx_flow() - Set Rx flow configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7); ++ * use 'DPNI_ALL_TCS' to set all TCs and all flows ++ * @flow_id: Rx flow id within the traffic class; use ++ * 'DPNI_ALL_TC_FLOWS' to set all flows within ++ * this tc_id; ignored if tc_id is set to ++ * 'DPNI_ALL_TCS'; ++ * @cfg: Rx flow configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_rx_flow(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint16_t flow_id, ++ const struct dpni_queue_cfg *cfg); ++ ++/** ++ * dpni_get_rx_flow() - Get Rx flow attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @flow_id: Rx flow id within the traffic class ++ * @attr: Returned Rx flow attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_rx_flow(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ uint16_t flow_id, ++ struct dpni_queue_attr *attr); ++ ++/** ++ * dpni_set_rx_err_queue() - Set Rx error queue configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @cfg: Queue configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_rx_err_queue(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_queue_cfg *cfg); ++ ++/** ++ * dpni_get_rx_err_queue() - Get Rx error queue attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @attr: Returned Queue attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_get_rx_err_queue(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpni_queue_attr *attr); ++ ++/** ++ * struct dpni_qos_tbl_cfg - Structure representing QOS table configuration ++ * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with ++ * key extractions to be used as the QoS criteria by calling ++ * dpni_prepare_key_cfg() ++ * @discard_on_miss: Set to '1' to discard frames in case of no match (miss); ++ * '0' to use the 'default_tc' in such cases ++ * @default_tc: Used in case of no-match and 'discard_on_miss'= 0 ++ */ ++struct dpni_qos_tbl_cfg { ++ uint64_t key_cfg_iova; ++ int discard_on_miss; ++ uint8_t default_tc; ++}; ++ ++/** ++ * dpni_set_qos_table() - Set QoS mapping table ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @cfg: QoS table configuration ++ * ++ * This function and all QoS-related functions require that ++ *'max_tcs > 1' was set at DPNI creation. ++ * ++ * warning: Before calling this function, call dpni_prepare_key_cfg() to ++ * prepare the key_cfg_iova parameter ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_qos_table(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_qos_tbl_cfg *cfg); ++ ++/** ++ * struct dpni_rule_cfg - Rule configuration for table lookup ++ * @key_iova: I/O virtual address of the key (must be in DMA-able memory) ++ * @mask_iova: I/O virtual address of the mask (must be in DMA-able memory) ++ * @key_size: key and mask size (in bytes) ++ */ ++struct dpni_rule_cfg { ++ uint64_t key_iova; ++ uint64_t mask_iova; ++ uint8_t key_size; ++}; ++ ++/** ++ * dpni_add_qos_entry() - Add QoS mapping entry (to select a traffic class) ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @cfg: QoS rule to add ++ * @tc_id: Traffic class selection (0-7) ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_add_qos_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_rule_cfg *cfg, ++ uint8_t tc_id); ++ ++/** ++ * dpni_remove_qos_entry() - Remove QoS mapping entry ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @cfg: QoS rule to remove ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_remove_qos_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpni_rule_cfg *cfg); ++ ++/** ++ * dpni_clear_qos_table() - Clear all QoS mapping entries ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * ++ * Following this function call, all frames are directed to ++ * the default traffic class (0) ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_clear_qos_table(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpni_add_fs_entry() - Add Flow Steering entry for a specific traffic class ++ * (to select a flow ID) ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: Flow steering rule to add ++ * @flow_id: Flow id selection (must be smaller than the ++ * distribution size of the traffic class) ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_add_fs_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_rule_cfg *cfg, ++ uint16_t flow_id); ++ ++/** ++ * dpni_remove_fs_entry() - Remove Flow Steering entry from a specific ++ * traffic class ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * @cfg: Flow steering rule to remove ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_remove_fs_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id, ++ const struct dpni_rule_cfg *cfg); ++ ++/** ++ * dpni_clear_fs_entries() - Clear all Flow Steering entries of a specific ++ * traffic class ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @tc_id: Traffic class selection (0-7) ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_clear_fs_entries(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t tc_id); ++ ++/** ++ * dpni_set_vlan_insertion() - Enable/disable VLAN insertion for egress frames ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Set to '1' to enable; '0' to disable ++ * ++ * Requires that the 'DPNI_OPT_VLAN_MANIPULATION' option is set ++ * at DPNI creation. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_vlan_insertion(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en); ++ ++/** ++ * dpni_set_vlan_removal() - Enable/disable VLAN removal for ingress frames ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Set to '1' to enable; '0' to disable ++ * ++ * Requires that the 'DPNI_OPT_VLAN_MANIPULATION' option is set ++ * at DPNI creation. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_vlan_removal(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en); ++ ++/** ++ * dpni_set_ipr() - Enable/disable IP reassembly of ingress frames ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Set to '1' to enable; '0' to disable ++ * ++ * Requires that the 'DPNI_OPT_IPR' option is set at DPNI creation. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_ipr(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en); ++ ++/** ++ * dpni_set_ipf() - Enable/disable IP fragmentation of egress frames ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPNI object ++ * @en: Set to '1' to enable; '0' to disable ++ * ++ * Requires that the 'DPNI_OPT_IPF' option is set at DPNI ++ * creation. Fragmentation is performed according to MTU value ++ * set by dpni_set_mtu() function ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpni_set_ipf(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int en); ++ ++#endif /* __FSL_DPNI_H */ +--- a/drivers/staging/fsl-mc/include/mc-cmd.h ++++ b/drivers/staging/fsl-mc/include/mc-cmd.h +@@ -103,8 +103,11 @@ enum mc_cmd_status { + #define MC_CMD_HDR_READ_FLAGS(_hdr) \ + ((u32)mc_dec((_hdr), MC_CMD_HDR_FLAGS_O, MC_CMD_HDR_FLAGS_S)) + ++#define MC_PREP_OP(_ext, _param, _offset, _width, _type, _arg) \ ++ ((_ext)[_param] |= cpu_to_le64(mc_enc((_offset), (_width), _arg))) ++ + #define MC_EXT_OP(_ext, _param, _offset, _width, _type, _arg) \ +- ((_ext)[_param] |= mc_enc((_offset), (_width), _arg)) ++ (_arg = (_type)mc_dec(cpu_to_le64(_ext[_param]), (_offset), (_width))) + + #define MC_CMD_OP(_cmd, _param, _offset, _width, _type, _arg) \ + ((_cmd).params[_param] |= mc_enc((_offset), (_width), _arg)) +--- /dev/null ++++ b/drivers/staging/fsl-mc/include/net.h +@@ -0,0 +1,481 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_NET_H ++#define __FSL_NET_H ++ ++#define LAST_HDR_INDEX 0xFFFFFFFF ++ ++/*****************************************************************************/ ++/* Protocol fields */ ++/*****************************************************************************/ ++ ++/************************* Ethernet fields *********************************/ ++#define NH_FLD_ETH_DA (1) ++#define NH_FLD_ETH_SA (NH_FLD_ETH_DA << 1) ++#define NH_FLD_ETH_LENGTH (NH_FLD_ETH_DA << 2) ++#define NH_FLD_ETH_TYPE (NH_FLD_ETH_DA << 3) ++#define NH_FLD_ETH_FINAL_CKSUM (NH_FLD_ETH_DA << 4) ++#define NH_FLD_ETH_PADDING (NH_FLD_ETH_DA << 5) ++#define NH_FLD_ETH_ALL_FIELDS ((NH_FLD_ETH_DA << 6) - 1) ++ ++#define NH_FLD_ETH_ADDR_SIZE 6 ++ ++/*************************** VLAN fields ***********************************/ ++#define NH_FLD_VLAN_VPRI (1) ++#define NH_FLD_VLAN_CFI (NH_FLD_VLAN_VPRI << 1) ++#define NH_FLD_VLAN_VID (NH_FLD_VLAN_VPRI << 2) ++#define NH_FLD_VLAN_LENGTH (NH_FLD_VLAN_VPRI << 3) ++#define NH_FLD_VLAN_TYPE (NH_FLD_VLAN_VPRI << 4) ++#define NH_FLD_VLAN_ALL_FIELDS ((NH_FLD_VLAN_VPRI << 5) - 1) ++ ++#define NH_FLD_VLAN_TCI (NH_FLD_VLAN_VPRI | \ ++ NH_FLD_VLAN_CFI | \ ++ NH_FLD_VLAN_VID) ++ ++/************************ IP (generic) fields ******************************/ ++#define NH_FLD_IP_VER (1) ++#define NH_FLD_IP_DSCP (NH_FLD_IP_VER << 2) ++#define NH_FLD_IP_ECN (NH_FLD_IP_VER << 3) ++#define NH_FLD_IP_PROTO (NH_FLD_IP_VER << 4) ++#define NH_FLD_IP_SRC (NH_FLD_IP_VER << 5) ++#define NH_FLD_IP_DST (NH_FLD_IP_VER << 6) ++#define NH_FLD_IP_TOS_TC (NH_FLD_IP_VER << 7) ++#define NH_FLD_IP_ID (NH_FLD_IP_VER << 8) ++#define NH_FLD_IP_ALL_FIELDS ((NH_FLD_IP_VER << 9) - 1) ++ ++#define NH_FLD_IP_PROTO_SIZE 1 ++ ++/***************************** IPV4 fields *********************************/ ++#define NH_FLD_IPV4_VER (1) ++#define NH_FLD_IPV4_HDR_LEN (NH_FLD_IPV4_VER << 1) ++#define NH_FLD_IPV4_TOS (NH_FLD_IPV4_VER << 2) ++#define NH_FLD_IPV4_TOTAL_LEN (NH_FLD_IPV4_VER << 3) ++#define NH_FLD_IPV4_ID (NH_FLD_IPV4_VER << 4) ++#define NH_FLD_IPV4_FLAG_D (NH_FLD_IPV4_VER << 5) ++#define NH_FLD_IPV4_FLAG_M (NH_FLD_IPV4_VER << 6) ++#define NH_FLD_IPV4_OFFSET (NH_FLD_IPV4_VER << 7) ++#define NH_FLD_IPV4_TTL (NH_FLD_IPV4_VER << 8) ++#define NH_FLD_IPV4_PROTO (NH_FLD_IPV4_VER << 9) ++#define NH_FLD_IPV4_CKSUM (NH_FLD_IPV4_VER << 10) ++#define NH_FLD_IPV4_SRC_IP (NH_FLD_IPV4_VER << 11) ++#define NH_FLD_IPV4_DST_IP (NH_FLD_IPV4_VER << 12) ++#define NH_FLD_IPV4_OPTS (NH_FLD_IPV4_VER << 13) ++#define NH_FLD_IPV4_OPTS_COUNT (NH_FLD_IPV4_VER << 14) ++#define NH_FLD_IPV4_ALL_FIELDS ((NH_FLD_IPV4_VER << 15) - 1) ++ ++#define NH_FLD_IPV4_ADDR_SIZE 4 ++#define NH_FLD_IPV4_PROTO_SIZE 1 ++ ++/***************************** IPV6 fields *********************************/ ++#define NH_FLD_IPV6_VER (1) ++#define NH_FLD_IPV6_TC (NH_FLD_IPV6_VER << 1) ++#define NH_FLD_IPV6_SRC_IP (NH_FLD_IPV6_VER << 2) ++#define NH_FLD_IPV6_DST_IP (NH_FLD_IPV6_VER << 3) ++#define NH_FLD_IPV6_NEXT_HDR (NH_FLD_IPV6_VER << 4) ++#define NH_FLD_IPV6_FL (NH_FLD_IPV6_VER << 5) ++#define NH_FLD_IPV6_HOP_LIMIT (NH_FLD_IPV6_VER << 6) ++#define NH_FLD_IPV6_ID (NH_FLD_IPV6_VER << 7) ++#define NH_FLD_IPV6_ALL_FIELDS ((NH_FLD_IPV6_VER << 8) - 1) ++ ++#define NH_FLD_IPV6_ADDR_SIZE 16 ++#define NH_FLD_IPV6_NEXT_HDR_SIZE 1 ++ ++/***************************** ICMP fields *********************************/ ++#define NH_FLD_ICMP_TYPE (1) ++#define NH_FLD_ICMP_CODE (NH_FLD_ICMP_TYPE << 1) ++#define NH_FLD_ICMP_CKSUM (NH_FLD_ICMP_TYPE << 2) ++#define NH_FLD_ICMP_ID (NH_FLD_ICMP_TYPE << 3) ++#define NH_FLD_ICMP_SQ_NUM (NH_FLD_ICMP_TYPE << 4) ++#define NH_FLD_ICMP_ALL_FIELDS ((NH_FLD_ICMP_TYPE << 5) - 1) ++ ++#define NH_FLD_ICMP_CODE_SIZE 1 ++#define NH_FLD_ICMP_TYPE_SIZE 1 ++ ++/***************************** IGMP fields *********************************/ ++#define NH_FLD_IGMP_VERSION (1) ++#define NH_FLD_IGMP_TYPE (NH_FLD_IGMP_VERSION << 1) ++#define NH_FLD_IGMP_CKSUM (NH_FLD_IGMP_VERSION << 2) ++#define NH_FLD_IGMP_DATA (NH_FLD_IGMP_VERSION << 3) ++#define NH_FLD_IGMP_ALL_FIELDS ((NH_FLD_IGMP_VERSION << 4) - 1) ++ ++/***************************** TCP fields **********************************/ ++#define NH_FLD_TCP_PORT_SRC (1) ++#define NH_FLD_TCP_PORT_DST (NH_FLD_TCP_PORT_SRC << 1) ++#define NH_FLD_TCP_SEQ (NH_FLD_TCP_PORT_SRC << 2) ++#define NH_FLD_TCP_ACK (NH_FLD_TCP_PORT_SRC << 3) ++#define NH_FLD_TCP_OFFSET (NH_FLD_TCP_PORT_SRC << 4) ++#define NH_FLD_TCP_FLAGS (NH_FLD_TCP_PORT_SRC << 5) ++#define NH_FLD_TCP_WINDOW (NH_FLD_TCP_PORT_SRC << 6) ++#define NH_FLD_TCP_CKSUM (NH_FLD_TCP_PORT_SRC << 7) ++#define NH_FLD_TCP_URGPTR (NH_FLD_TCP_PORT_SRC << 8) ++#define NH_FLD_TCP_OPTS (NH_FLD_TCP_PORT_SRC << 9) ++#define NH_FLD_TCP_OPTS_COUNT (NH_FLD_TCP_PORT_SRC << 10) ++#define NH_FLD_TCP_ALL_FIELDS ((NH_FLD_TCP_PORT_SRC << 11) - 1) ++ ++#define NH_FLD_TCP_PORT_SIZE 2 ++ ++/***************************** UDP fields **********************************/ ++#define NH_FLD_UDP_PORT_SRC (1) ++#define NH_FLD_UDP_PORT_DST (NH_FLD_UDP_PORT_SRC << 1) ++#define NH_FLD_UDP_LEN (NH_FLD_UDP_PORT_SRC << 2) ++#define NH_FLD_UDP_CKSUM (NH_FLD_UDP_PORT_SRC << 3) ++#define NH_FLD_UDP_ALL_FIELDS ((NH_FLD_UDP_PORT_SRC << 4) - 1) ++ ++#define NH_FLD_UDP_PORT_SIZE 2 ++ ++/*************************** UDP-lite fields *******************************/ ++#define NH_FLD_UDP_LITE_PORT_SRC (1) ++#define NH_FLD_UDP_LITE_PORT_DST (NH_FLD_UDP_LITE_PORT_SRC << 1) ++#define NH_FLD_UDP_LITE_ALL_FIELDS \ ++ ((NH_FLD_UDP_LITE_PORT_SRC << 2) - 1) ++ ++#define NH_FLD_UDP_LITE_PORT_SIZE 2 ++ ++/*************************** UDP-encap-ESP fields **************************/ ++#define NH_FLD_UDP_ENC_ESP_PORT_SRC (1) ++#define NH_FLD_UDP_ENC_ESP_PORT_DST (NH_FLD_UDP_ENC_ESP_PORT_SRC << 1) ++#define NH_FLD_UDP_ENC_ESP_LEN (NH_FLD_UDP_ENC_ESP_PORT_SRC << 2) ++#define NH_FLD_UDP_ENC_ESP_CKSUM (NH_FLD_UDP_ENC_ESP_PORT_SRC << 3) ++#define NH_FLD_UDP_ENC_ESP_SPI (NH_FLD_UDP_ENC_ESP_PORT_SRC << 4) ++#define NH_FLD_UDP_ENC_ESP_SEQUENCE_NUM (NH_FLD_UDP_ENC_ESP_PORT_SRC << 5) ++#define NH_FLD_UDP_ENC_ESP_ALL_FIELDS \ ++ ((NH_FLD_UDP_ENC_ESP_PORT_SRC << 6) - 1) ++ ++#define NH_FLD_UDP_ENC_ESP_PORT_SIZE 2 ++#define NH_FLD_UDP_ENC_ESP_SPI_SIZE 4 ++ ++/***************************** SCTP fields *********************************/ ++#define NH_FLD_SCTP_PORT_SRC (1) ++#define NH_FLD_SCTP_PORT_DST (NH_FLD_SCTP_PORT_SRC << 1) ++#define NH_FLD_SCTP_VER_TAG (NH_FLD_SCTP_PORT_SRC << 2) ++#define NH_FLD_SCTP_CKSUM (NH_FLD_SCTP_PORT_SRC << 3) ++#define NH_FLD_SCTP_ALL_FIELDS ((NH_FLD_SCTP_PORT_SRC << 4) - 1) ++ ++#define NH_FLD_SCTP_PORT_SIZE 2 ++ ++/***************************** DCCP fields *********************************/ ++#define NH_FLD_DCCP_PORT_SRC (1) ++#define NH_FLD_DCCP_PORT_DST (NH_FLD_DCCP_PORT_SRC << 1) ++#define NH_FLD_DCCP_ALL_FIELDS ((NH_FLD_DCCP_PORT_SRC << 2) - 1) ++ ++#define NH_FLD_DCCP_PORT_SIZE 2 ++ ++/***************************** IPHC fields *********************************/ ++#define NH_FLD_IPHC_CID (1) ++#define NH_FLD_IPHC_CID_TYPE (NH_FLD_IPHC_CID << 1) ++#define NH_FLD_IPHC_HCINDEX (NH_FLD_IPHC_CID << 2) ++#define NH_FLD_IPHC_GEN (NH_FLD_IPHC_CID << 3) ++#define NH_FLD_IPHC_D_BIT (NH_FLD_IPHC_CID << 4) ++#define NH_FLD_IPHC_ALL_FIELDS ((NH_FLD_IPHC_CID << 5) - 1) ++ ++/***************************** SCTP fields *********************************/ ++#define NH_FLD_SCTP_CHUNK_DATA_TYPE (1) ++#define NH_FLD_SCTP_CHUNK_DATA_FLAGS (NH_FLD_SCTP_CHUNK_DATA_TYPE << 1) ++#define NH_FLD_SCTP_CHUNK_DATA_LENGTH (NH_FLD_SCTP_CHUNK_DATA_TYPE << 2) ++#define NH_FLD_SCTP_CHUNK_DATA_TSN (NH_FLD_SCTP_CHUNK_DATA_TYPE << 3) ++#define NH_FLD_SCTP_CHUNK_DATA_STREAM_ID (NH_FLD_SCTP_CHUNK_DATA_TYPE << 4) ++#define NH_FLD_SCTP_CHUNK_DATA_STREAM_SQN (NH_FLD_SCTP_CHUNK_DATA_TYPE << 5) ++#define NH_FLD_SCTP_CHUNK_DATA_PAYLOAD_PID (NH_FLD_SCTP_CHUNK_DATA_TYPE << 6) ++#define NH_FLD_SCTP_CHUNK_DATA_UNORDERED (NH_FLD_SCTP_CHUNK_DATA_TYPE << 7) ++#define NH_FLD_SCTP_CHUNK_DATA_BEGGINING (NH_FLD_SCTP_CHUNK_DATA_TYPE << 8) ++#define NH_FLD_SCTP_CHUNK_DATA_END (NH_FLD_SCTP_CHUNK_DATA_TYPE << 9) ++#define NH_FLD_SCTP_CHUNK_DATA_ALL_FIELDS \ ++ ((NH_FLD_SCTP_CHUNK_DATA_TYPE << 10) - 1) ++ ++/*************************** L2TPV2 fields *********************************/ ++#define NH_FLD_L2TPV2_TYPE_BIT (1) ++#define NH_FLD_L2TPV2_LENGTH_BIT (NH_FLD_L2TPV2_TYPE_BIT << 1) ++#define NH_FLD_L2TPV2_SEQUENCE_BIT (NH_FLD_L2TPV2_TYPE_BIT << 2) ++#define NH_FLD_L2TPV2_OFFSET_BIT (NH_FLD_L2TPV2_TYPE_BIT << 3) ++#define NH_FLD_L2TPV2_PRIORITY_BIT (NH_FLD_L2TPV2_TYPE_BIT << 4) ++#define NH_FLD_L2TPV2_VERSION (NH_FLD_L2TPV2_TYPE_BIT << 5) ++#define NH_FLD_L2TPV2_LEN (NH_FLD_L2TPV2_TYPE_BIT << 6) ++#define NH_FLD_L2TPV2_TUNNEL_ID (NH_FLD_L2TPV2_TYPE_BIT << 7) ++#define NH_FLD_L2TPV2_SESSION_ID (NH_FLD_L2TPV2_TYPE_BIT << 8) ++#define NH_FLD_L2TPV2_NS (NH_FLD_L2TPV2_TYPE_BIT << 9) ++#define NH_FLD_L2TPV2_NR (NH_FLD_L2TPV2_TYPE_BIT << 10) ++#define NH_FLD_L2TPV2_OFFSET_SIZE (NH_FLD_L2TPV2_TYPE_BIT << 11) ++#define NH_FLD_L2TPV2_FIRST_BYTE (NH_FLD_L2TPV2_TYPE_BIT << 12) ++#define NH_FLD_L2TPV2_ALL_FIELDS \ ++ ((NH_FLD_L2TPV2_TYPE_BIT << 13) - 1) ++ ++/*************************** L2TPV3 fields *********************************/ ++#define NH_FLD_L2TPV3_CTRL_TYPE_BIT (1) ++#define NH_FLD_L2TPV3_CTRL_LENGTH_BIT (NH_FLD_L2TPV3_CTRL_TYPE_BIT << 1) ++#define NH_FLD_L2TPV3_CTRL_SEQUENCE_BIT (NH_FLD_L2TPV3_CTRL_TYPE_BIT << 2) ++#define NH_FLD_L2TPV3_CTRL_VERSION (NH_FLD_L2TPV3_CTRL_TYPE_BIT << 3) ++#define NH_FLD_L2TPV3_CTRL_LENGTH (NH_FLD_L2TPV3_CTRL_TYPE_BIT << 4) ++#define NH_FLD_L2TPV3_CTRL_CONTROL (NH_FLD_L2TPV3_CTRL_TYPE_BIT << 5) ++#define NH_FLD_L2TPV3_CTRL_SENT (NH_FLD_L2TPV3_CTRL_TYPE_BIT << 6) ++#define NH_FLD_L2TPV3_CTRL_RECV (NH_FLD_L2TPV3_CTRL_TYPE_BIT << 7) ++#define NH_FLD_L2TPV3_CTRL_FIRST_BYTE (NH_FLD_L2TPV3_CTRL_TYPE_BIT << 8) ++#define NH_FLD_L2TPV3_CTRL_ALL_FIELDS \ ++ ((NH_FLD_L2TPV3_CTRL_TYPE_BIT << 9) - 1) ++ ++#define NH_FLD_L2TPV3_SESS_TYPE_BIT (1) ++#define NH_FLD_L2TPV3_SESS_VERSION (NH_FLD_L2TPV3_SESS_TYPE_BIT << 1) ++#define NH_FLD_L2TPV3_SESS_ID (NH_FLD_L2TPV3_SESS_TYPE_BIT << 2) ++#define NH_FLD_L2TPV3_SESS_COOKIE (NH_FLD_L2TPV3_SESS_TYPE_BIT << 3) ++#define NH_FLD_L2TPV3_SESS_ALL_FIELDS \ ++ ((NH_FLD_L2TPV3_SESS_TYPE_BIT << 4) - 1) ++ ++/**************************** PPP fields ***********************************/ ++#define NH_FLD_PPP_PID (1) ++#define NH_FLD_PPP_COMPRESSED (NH_FLD_PPP_PID << 1) ++#define NH_FLD_PPP_ALL_FIELDS ((NH_FLD_PPP_PID << 2) - 1) ++ ++/************************** PPPoE fields ***********************************/ ++#define NH_FLD_PPPOE_VER (1) ++#define NH_FLD_PPPOE_TYPE (NH_FLD_PPPOE_VER << 1) ++#define NH_FLD_PPPOE_CODE (NH_FLD_PPPOE_VER << 2) ++#define NH_FLD_PPPOE_SID (NH_FLD_PPPOE_VER << 3) ++#define NH_FLD_PPPOE_LEN (NH_FLD_PPPOE_VER << 4) ++#define NH_FLD_PPPOE_SESSION (NH_FLD_PPPOE_VER << 5) ++#define NH_FLD_PPPOE_PID (NH_FLD_PPPOE_VER << 6) ++#define NH_FLD_PPPOE_ALL_FIELDS ((NH_FLD_PPPOE_VER << 7) - 1) ++ ++/************************* PPP-Mux fields **********************************/ ++#define NH_FLD_PPPMUX_PID (1) ++#define NH_FLD_PPPMUX_CKSUM (NH_FLD_PPPMUX_PID << 1) ++#define NH_FLD_PPPMUX_COMPRESSED (NH_FLD_PPPMUX_PID << 2) ++#define NH_FLD_PPPMUX_ALL_FIELDS ((NH_FLD_PPPMUX_PID << 3) - 1) ++ ++/*********************** PPP-Mux sub-frame fields **************************/ ++#define NH_FLD_PPPMUX_SUBFRM_PFF (1) ++#define NH_FLD_PPPMUX_SUBFRM_LXT (NH_FLD_PPPMUX_SUBFRM_PFF << 1) ++#define NH_FLD_PPPMUX_SUBFRM_LEN (NH_FLD_PPPMUX_SUBFRM_PFF << 2) ++#define NH_FLD_PPPMUX_SUBFRM_PID (NH_FLD_PPPMUX_SUBFRM_PFF << 3) ++#define NH_FLD_PPPMUX_SUBFRM_USE_PID (NH_FLD_PPPMUX_SUBFRM_PFF << 4) ++#define NH_FLD_PPPMUX_SUBFRM_ALL_FIELDS \ ++ ((NH_FLD_PPPMUX_SUBFRM_PFF << 5) - 1) ++ ++/*************************** LLC fields ************************************/ ++#define NH_FLD_LLC_DSAP (1) ++#define NH_FLD_LLC_SSAP (NH_FLD_LLC_DSAP << 1) ++#define NH_FLD_LLC_CTRL (NH_FLD_LLC_DSAP << 2) ++#define NH_FLD_LLC_ALL_FIELDS ((NH_FLD_LLC_DSAP << 3) - 1) ++ ++/*************************** NLPID fields **********************************/ ++#define NH_FLD_NLPID_NLPID (1) ++#define NH_FLD_NLPID_ALL_FIELDS ((NH_FLD_NLPID_NLPID << 1) - 1) ++ ++/*************************** SNAP fields ***********************************/ ++#define NH_FLD_SNAP_OUI (1) ++#define NH_FLD_SNAP_PID (NH_FLD_SNAP_OUI << 1) ++#define NH_FLD_SNAP_ALL_FIELDS ((NH_FLD_SNAP_OUI << 2) - 1) ++ ++/*************************** LLC SNAP fields *******************************/ ++#define NH_FLD_LLC_SNAP_TYPE (1) ++#define NH_FLD_LLC_SNAP_ALL_FIELDS ((NH_FLD_LLC_SNAP_TYPE << 1) - 1) ++ ++#define NH_FLD_ARP_HTYPE (1) ++#define NH_FLD_ARP_PTYPE (NH_FLD_ARP_HTYPE << 1) ++#define NH_FLD_ARP_HLEN (NH_FLD_ARP_HTYPE << 2) ++#define NH_FLD_ARP_PLEN (NH_FLD_ARP_HTYPE << 3) ++#define NH_FLD_ARP_OPER (NH_FLD_ARP_HTYPE << 4) ++#define NH_FLD_ARP_SHA (NH_FLD_ARP_HTYPE << 5) ++#define NH_FLD_ARP_SPA (NH_FLD_ARP_HTYPE << 6) ++#define NH_FLD_ARP_THA (NH_FLD_ARP_HTYPE << 7) ++#define NH_FLD_ARP_TPA (NH_FLD_ARP_HTYPE << 8) ++#define NH_FLD_ARP_ALL_FIELDS ((NH_FLD_ARP_HTYPE << 9) - 1) ++ ++/*************************** RFC2684 fields ********************************/ ++#define NH_FLD_RFC2684_LLC (1) ++#define NH_FLD_RFC2684_NLPID (NH_FLD_RFC2684_LLC << 1) ++#define NH_FLD_RFC2684_OUI (NH_FLD_RFC2684_LLC << 2) ++#define NH_FLD_RFC2684_PID (NH_FLD_RFC2684_LLC << 3) ++#define NH_FLD_RFC2684_VPN_OUI (NH_FLD_RFC2684_LLC << 4) ++#define NH_FLD_RFC2684_VPN_IDX (NH_FLD_RFC2684_LLC << 5) ++#define NH_FLD_RFC2684_ALL_FIELDS ((NH_FLD_RFC2684_LLC << 6) - 1) ++ ++/*************************** User defined fields ***************************/ ++#define NH_FLD_USER_DEFINED_SRCPORT (1) ++#define NH_FLD_USER_DEFINED_PCDID (NH_FLD_USER_DEFINED_SRCPORT << 1) ++#define NH_FLD_USER_DEFINED_ALL_FIELDS \ ++ ((NH_FLD_USER_DEFINED_SRCPORT << 2) - 1) ++ ++/*************************** Payload fields ********************************/ ++#define NH_FLD_PAYLOAD_BUFFER (1) ++#define NH_FLD_PAYLOAD_SIZE (NH_FLD_PAYLOAD_BUFFER << 1) ++#define NH_FLD_MAX_FRM_SIZE (NH_FLD_PAYLOAD_BUFFER << 2) ++#define NH_FLD_MIN_FRM_SIZE (NH_FLD_PAYLOAD_BUFFER << 3) ++#define NH_FLD_PAYLOAD_TYPE (NH_FLD_PAYLOAD_BUFFER << 4) ++#define NH_FLD_FRAME_SIZE (NH_FLD_PAYLOAD_BUFFER << 5) ++#define NH_FLD_PAYLOAD_ALL_FIELDS ((NH_FLD_PAYLOAD_BUFFER << 6) - 1) ++ ++/*************************** GRE fields ************************************/ ++#define NH_FLD_GRE_TYPE (1) ++#define NH_FLD_GRE_ALL_FIELDS ((NH_FLD_GRE_TYPE << 1) - 1) ++ ++/*************************** MINENCAP fields *******************************/ ++#define NH_FLD_MINENCAP_SRC_IP (1) ++#define NH_FLD_MINENCAP_DST_IP (NH_FLD_MINENCAP_SRC_IP << 1) ++#define NH_FLD_MINENCAP_TYPE (NH_FLD_MINENCAP_SRC_IP << 2) ++#define NH_FLD_MINENCAP_ALL_FIELDS \ ++ ((NH_FLD_MINENCAP_SRC_IP << 3) - 1) ++ ++/*************************** IPSEC AH fields *******************************/ ++#define NH_FLD_IPSEC_AH_SPI (1) ++#define NH_FLD_IPSEC_AH_NH (NH_FLD_IPSEC_AH_SPI << 1) ++#define NH_FLD_IPSEC_AH_ALL_FIELDS ((NH_FLD_IPSEC_AH_SPI << 2) - 1) ++ ++/*************************** IPSEC ESP fields ******************************/ ++#define NH_FLD_IPSEC_ESP_SPI (1) ++#define NH_FLD_IPSEC_ESP_SEQUENCE_NUM (NH_FLD_IPSEC_ESP_SPI << 1) ++#define NH_FLD_IPSEC_ESP_ALL_FIELDS ((NH_FLD_IPSEC_ESP_SPI << 2) - 1) ++ ++#define NH_FLD_IPSEC_ESP_SPI_SIZE 4 ++ ++/*************************** MPLS fields ***********************************/ ++#define NH_FLD_MPLS_LABEL_STACK (1) ++#define NH_FLD_MPLS_LABEL_STACK_ALL_FIELDS \ ++ ((NH_FLD_MPLS_LABEL_STACK << 1) - 1) ++ ++/*************************** MACSEC fields *********************************/ ++#define NH_FLD_MACSEC_SECTAG (1) ++#define NH_FLD_MACSEC_ALL_FIELDS ((NH_FLD_MACSEC_SECTAG << 1) - 1) ++ ++/*************************** GTP fields ************************************/ ++#define NH_FLD_GTP_TEID (1) ++ ++ ++/* Protocol options */ ++ ++/* Ethernet options */ ++#define NH_OPT_ETH_BROADCAST 1 ++#define NH_OPT_ETH_MULTICAST 2 ++#define NH_OPT_ETH_UNICAST 3 ++#define NH_OPT_ETH_BPDU 4 ++ ++#define NH_ETH_IS_MULTICAST_ADDR(addr) (addr[0] & 0x01) ++/* also applicable for broadcast */ ++ ++/* VLAN options */ ++#define NH_OPT_VLAN_CFI 1 ++ ++/* IPV4 options */ ++#define NH_OPT_IPV4_UNICAST 1 ++#define NH_OPT_IPV4_MULTICAST 2 ++#define NH_OPT_IPV4_BROADCAST 3 ++#define NH_OPT_IPV4_OPTION 4 ++#define NH_OPT_IPV4_FRAG 5 ++#define NH_OPT_IPV4_INITIAL_FRAG 6 ++ ++/* IPV6 options */ ++#define NH_OPT_IPV6_UNICAST 1 ++#define NH_OPT_IPV6_MULTICAST 2 ++#define NH_OPT_IPV6_OPTION 3 ++#define NH_OPT_IPV6_FRAG 4 ++#define NH_OPT_IPV6_INITIAL_FRAG 5 ++ ++/* General IP options (may be used for any version) */ ++#define NH_OPT_IP_FRAG 1 ++#define NH_OPT_IP_INITIAL_FRAG 2 ++#define NH_OPT_IP_OPTION 3 ++ ++/* Minenc. options */ ++#define NH_OPT_MINENCAP_SRC_ADDR_PRESENT 1 ++ ++/* GRE. options */ ++#define NH_OPT_GRE_ROUTING_PRESENT 1 ++ ++/* TCP options */ ++#define NH_OPT_TCP_OPTIONS 1 ++#define NH_OPT_TCP_CONTROL_HIGH_BITS 2 ++#define NH_OPT_TCP_CONTROL_LOW_BITS 3 ++ ++/* CAPWAP options */ ++#define NH_OPT_CAPWAP_DTLS 1 ++ ++enum net_prot { ++ NET_PROT_NONE = 0, ++ NET_PROT_PAYLOAD, ++ NET_PROT_ETH, ++ NET_PROT_VLAN, ++ NET_PROT_IPV4, ++ NET_PROT_IPV6, ++ NET_PROT_IP, ++ NET_PROT_TCP, ++ NET_PROT_UDP, ++ NET_PROT_UDP_LITE, ++ NET_PROT_IPHC, ++ NET_PROT_SCTP, ++ NET_PROT_SCTP_CHUNK_DATA, ++ NET_PROT_PPPOE, ++ NET_PROT_PPP, ++ NET_PROT_PPPMUX, ++ NET_PROT_PPPMUX_SUBFRM, ++ NET_PROT_L2TPV2, ++ NET_PROT_L2TPV3_CTRL, ++ NET_PROT_L2TPV3_SESS, ++ NET_PROT_LLC, ++ NET_PROT_LLC_SNAP, ++ NET_PROT_NLPID, ++ NET_PROT_SNAP, ++ NET_PROT_MPLS, ++ NET_PROT_IPSEC_AH, ++ NET_PROT_IPSEC_ESP, ++ NET_PROT_UDP_ENC_ESP, /* RFC 3948 */ ++ NET_PROT_MACSEC, ++ NET_PROT_GRE, ++ NET_PROT_MINENCAP, ++ NET_PROT_DCCP, ++ NET_PROT_ICMP, ++ NET_PROT_IGMP, ++ NET_PROT_ARP, ++ NET_PROT_CAPWAP_DATA, ++ NET_PROT_CAPWAP_CTRL, ++ NET_PROT_RFC2684, ++ NET_PROT_ICMPV6, ++ NET_PROT_FCOE, ++ NET_PROT_FIP, ++ NET_PROT_ISCSI, ++ NET_PROT_GTP, ++ NET_PROT_USER_DEFINED_L2, ++ NET_PROT_USER_DEFINED_L3, ++ NET_PROT_USER_DEFINED_L4, ++ NET_PROT_USER_DEFINED_L5, ++ NET_PROT_USER_DEFINED_SHIM1, ++ NET_PROT_USER_DEFINED_SHIM2, ++ ++ NET_PROT_DUMMY_LAST ++}; ++ ++/*! IEEE8021.Q */ ++#define NH_IEEE8021Q_ETYPE 0x8100 ++#define NH_IEEE8021Q_HDR(etype, pcp, dei, vlan_id) \ ++ ((((uint32_t)(etype & 0xFFFF)) << 16) | \ ++ (((uint32_t)(pcp & 0x07)) << 13) | \ ++ (((uint32_t)(dei & 0x01)) << 12) | \ ++ (((uint32_t)(vlan_id & 0xFFF)))) ++ ++#endif /* __FSL_NET_H */ +--- a/net/core/pktgen.c ++++ b/net/core/pktgen.c +@@ -2790,6 +2790,7 @@ static struct sk_buff *pktgen_alloc_skb( + } else { + skb = __netdev_alloc_skb(dev, size, GFP_NOWAIT); + } ++ skb_reserve(skb, LL_RESERVED_SPACE(dev)); + + /* the caller pre-fetches from skb->data and reserves for the mac hdr */ + if (likely(skb)) diff --git a/target/linux/layerscape/patches-4.4/7202-staging-fsl-dpaa2-eth-code-cleanup-for-upstreaming.patch b/target/linux/layerscape/patches-4.4/7202-staging-fsl-dpaa2-eth-code-cleanup-for-upstreaming.patch new file mode 100644 index 0000000000..d331b6600c --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7202-staging-fsl-dpaa2-eth-code-cleanup-for-upstreaming.patch @@ -0,0 +1,3257 @@ +From 2a6f0dd5425cf43b8c09a8203e6ee64ba2b3868d Mon Sep 17 00:00:00 2001 +From: Bogdan Hamciuc +Date: Tue, 12 Jan 2016 08:58:40 +0200 +Subject: [PATCH 202/226] staging: fsl-dpaa2: eth: code cleanup for + upstreaming + +-this is a squash of cleanup commits (see QLINUX-5338), all commit logs + are below + +Signed-off-by: Stuart Yoder + +--------------------------------------------------------------------- + +fsl-dpaa2: eth: Drain queues upon ifconfig down + +MC firmware assists in draining the Tx FQs; the Eth driver flushes the +Rx and TxConfirm queues then empties the buffer pool. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: eth: Don't use magic numbers + +Add a define to avoid mentioning directly the maximum number +of buffers released/acquired through a single QBMan command. + +Signed-off-by: Ioana Radulescu + +dpaa2-eth: Remove cpumask_rr macro + +It's only used in one place and not very intuitive + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Rename a variable + +The old name was a leftover and non-intuitive. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Rearrange code + +Rearrange the conditional statements in several functions +to avoid excessive indenting, with no change in functionality. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Remove incorrect check + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Fix bug on error path + +We were not doing a DMA unmap on the error path of dpaa2_dpni_setup. +Reorganize the code a bit to avoid this. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Error messages cleanup + +This commit cleans up and improves uniformity of messages on +error paths throughout the Ethernet driver: + +* don't use WARN/WARN_ON/WARN_ONCE for warning messages, as +we don't need a stack dump +* give up using the DPAA2_ETH_WARN_IF_ERR custom macro +* ensure dev_err and netdev_err are each used where needed and +not randomly +* remove error messages on memory allocation failures; the kernel +is quite capable of dumping a detailed message when that happens +* remove error messages on the fast path; we don't want to flood +the console and we already increment counters in most error cases +* ratelimit error messages where appropriate + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Fix name of ethtool counters + +Rename counters in ethtool -S from "portal busy" to "dequeue portal +busy" and from "tx portal busy" to "enqueue portal busy", so it's +less confusing for the user. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Retry DAN rearm if portal busy + +There's a chance the data available notification rearming will +fail if the QBMan portal is busy. Keep retrying until portal +becomes available again, like we do for buffer release and +pull dequeue operations. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Add cpu_relax() to portal busy loops + +For several DPIO operations, we may need to repeatedly try +until the QBMan portal is no longer busy. Add a cpu_relax() to +those loops, like we were already doing when seeding buffers. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Add a counter for channel pull errors + +We no longer print an error message in this case, so add an error +counter so we can at least know something went wrong. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Function renames + +Attempt to provide more uniformity for the DPAA2 Ethernet +driver function naming conventions: +* major functions (ndo_ops, driver ops, ethtool, etc) all have +the "dpaa2_eth" prefix +* non-static functions also start with "dpaa2_eth" +* static helper functions don't get any prefix in order to avoid +very long names +* some functions get more intuitive and/or explicit names +* don't use names starting with an underscore + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Structure and macro renames + +Some more renaming: +* defines of error/status bits in the frame annotation status +word get a "DPAA2_FAS" prefix instead of "DPAA2_ETH_FAS", as they're +not really specific to the ethernet driver. We may consider moving +these defines to a separate header file in the future +* DPAA2_ETH_RX_BUFFER_SIZE is renamed to DPAA2_ETH_RX_BUF_SIZE +to better match the naming style of other defines +* structure "dpaa2_eth_stats" becomes "dpaa2_eth_drv_stats" to +make it clear these are driver specific statistics + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Cosmetics + +Various coding style fixes and other minor cosmetics, +with no functional impact. Also remove a couple of unused +defines and a structure field. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Move function call + +Move call to set_fq_affinity() from probe to setup_fqs(), as it +logically belongs there. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Comments cleanup + +Add relevant comments where needed, remove obsolete or +useless ones. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Remove link poll Kconfig option + +Always try to use interrupts, but if they are not available +fall back to polling the link state. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: Remove message level + +We were defining netif message level, but we weren't using +it when printing error/info messages, so remove for now. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: eth: fix compile error on 4.5 uprev + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/ethernet/Kconfig | 6 - + .../staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c | 6 +- + drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 992 ++++++++++---------- + drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 133 +-- + drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c | 226 ++--- + 5 files changed, 693 insertions(+), 670 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/ethernet/Kconfig ++++ b/drivers/staging/fsl-dpaa2/ethernet/Kconfig +@@ -16,12 +16,6 @@ menuconfig FSL_DPAA2_ETH + driver, using the Freescale MC bus driver. + + if FSL_DPAA2_ETH +-config FSL_DPAA2_ETH_LINK_POLL +- bool "Use polling mode for link state" +- default n +- ---help--- +- Poll for detecting link state changes instead of using +- interrupts. + + config FSL_DPAA2_ETH_USE_ERR_QUEUE + bool "Enable Rx error queue" +--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth-debugfs.c +@@ -30,7 +30,6 @@ + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +- + #include + #include + #include "dpaa2-eth.h" +@@ -38,14 +37,13 @@ + + #define DPAA2_ETH_DBG_ROOT "dpaa2-eth" + +- + static struct dentry *dpaa2_dbg_root; + + static int dpaa2_dbg_cpu_show(struct seq_file *file, void *offset) + { + struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)file->private; + struct rtnl_link_stats64 *stats; +- struct dpaa2_eth_stats *extras; ++ struct dpaa2_eth_drv_stats *extras; + int i; + + seq_printf(file, "Per-CPU stats for %s\n", priv->net_dev->name); +@@ -200,7 +198,7 @@ static ssize_t dpaa2_dbg_reset_write(str + { + struct dpaa2_eth_priv *priv = file->private_data; + struct rtnl_link_stats64 *percpu_stats; +- struct dpaa2_eth_stats *percpu_extras; ++ struct dpaa2_eth_drv_stats *percpu_extras; + struct dpaa2_eth_fq *fq; + struct dpaa2_eth_channel *ch; + int i; +--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c +@@ -53,26 +53,14 @@ MODULE_LICENSE("Dual BSD/GPL"); + MODULE_AUTHOR("Freescale Semiconductor, Inc"); + MODULE_DESCRIPTION("Freescale DPAA2 Ethernet Driver"); + +-static int debug = -1; +-module_param(debug, int, S_IRUGO); +-MODULE_PARM_DESC(debug, "Module/Driver verbosity level"); +- + /* Oldest DPAA2 objects version we are compatible with */ + #define DPAA2_SUPPORTED_DPNI_VERSION 6 + #define DPAA2_SUPPORTED_DPBP_VERSION 2 + #define DPAA2_SUPPORTED_DPCON_VERSION 2 + +-/* Iterate through the cpumask in a round-robin fashion. */ +-#define cpumask_rr(cpu, maskptr) \ +-do { \ +- (cpu) = cpumask_next((cpu), (maskptr)); \ +- if ((cpu) >= nr_cpu_ids) \ +- (cpu) = cpumask_first((maskptr)); \ +-} while (0) +- +-static void dpaa2_eth_rx_csum(struct dpaa2_eth_priv *priv, +- u32 fd_status, +- struct sk_buff *skb) ++static void validate_rx_csum(struct dpaa2_eth_priv *priv, ++ u32 fd_status, ++ struct sk_buff *skb) + { + skb_checksum_none_assert(skb); + +@@ -81,8 +69,8 @@ static void dpaa2_eth_rx_csum(struct dpa + return; + + /* Read checksum validation bits */ +- if (!((fd_status & DPAA2_ETH_FAS_L3CV) && +- (fd_status & DPAA2_ETH_FAS_L4CV))) ++ if (!((fd_status & DPAA2_FAS_L3CV) && ++ (fd_status & DPAA2_FAS_L4CV))) + return; + + /* Inform the stack there's no need to compute L3/L4 csum anymore */ +@@ -92,53 +80,55 @@ static void dpaa2_eth_rx_csum(struct dpa + /* Free a received FD. + * Not to be used for Tx conf FDs or on any other paths. + */ +-static void dpaa2_eth_free_rx_fd(struct dpaa2_eth_priv *priv, +- const struct dpaa2_fd *fd, +- void *vaddr) ++static void free_rx_fd(struct dpaa2_eth_priv *priv, ++ const struct dpaa2_fd *fd, ++ void *vaddr) + { + struct device *dev = priv->net_dev->dev.parent; + dma_addr_t addr = dpaa2_fd_get_addr(fd); + u8 fd_format = dpaa2_fd_get_format(fd); ++ struct dpaa2_sg_entry *sgt; ++ void *sg_vaddr; ++ int i; + +- if (fd_format == dpaa2_fd_sg) { +- struct dpaa2_sg_entry *sgt = vaddr + dpaa2_fd_get_offset(fd); +- void *sg_vaddr; +- int i; ++ /* If single buffer frame, just free the data buffer */ ++ if (fd_format == dpaa2_fd_single) ++ goto free_buf; + +- for (i = 0; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) { +- dpaa2_sg_le_to_cpu(&sgt[i]); ++ /* For S/G frames, we first need to free all SG entries */ ++ sgt = vaddr + dpaa2_fd_get_offset(fd); ++ for (i = 0; i < DPAA2_ETH_MAX_SG_ENTRIES; i++) { ++ dpaa2_sg_le_to_cpu(&sgt[i]); + +- addr = dpaa2_sg_get_addr(&sgt[i]); +- dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUFFER_SIZE, +- DMA_FROM_DEVICE); ++ addr = dpaa2_sg_get_addr(&sgt[i]); ++ dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, ++ DMA_FROM_DEVICE); + +- sg_vaddr = phys_to_virt(addr); +- put_page(virt_to_head_page(sg_vaddr)); ++ sg_vaddr = phys_to_virt(addr); ++ put_page(virt_to_head_page(sg_vaddr)); + +- if (dpaa2_sg_is_final(&sgt[i])) +- break; +- } ++ if (dpaa2_sg_is_final(&sgt[i])) ++ break; + } + ++free_buf: + put_page(virt_to_head_page(vaddr)); + } + + /* Build a linear skb based on a single-buffer frame descriptor */ +-static struct sk_buff *dpaa2_eth_build_linear_skb(struct dpaa2_eth_priv *priv, +- struct dpaa2_eth_channel *ch, +- const struct dpaa2_fd *fd, +- void *fd_vaddr) ++static struct sk_buff *build_linear_skb(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ const struct dpaa2_fd *fd, ++ void *fd_vaddr) + { + struct sk_buff *skb = NULL; + u16 fd_offset = dpaa2_fd_get_offset(fd); + u32 fd_length = dpaa2_fd_get_len(fd); + +- skb = build_skb(fd_vaddr, DPAA2_ETH_RX_BUFFER_SIZE + ++ skb = build_skb(fd_vaddr, DPAA2_ETH_RX_BUF_SIZE + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))); +- if (unlikely(!skb)) { +- netdev_err(priv->net_dev, "build_skb() failed\n"); ++ if (unlikely(!skb)) + return NULL; +- } + + skb_reserve(skb, fd_offset); + skb_put(skb, fd_length); +@@ -149,9 +139,9 @@ static struct sk_buff *dpaa2_eth_build_l + } + + /* Build a non linear (fragmented) skb based on a S/G table */ +-static struct sk_buff *dpaa2_eth_build_frag_skb(struct dpaa2_eth_priv *priv, +- struct dpaa2_eth_channel *ch, +- struct dpaa2_sg_entry *sgt) ++static struct sk_buff *build_frag_skb(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ struct dpaa2_sg_entry *sgt) + { + struct sk_buff *skb = NULL; + struct device *dev = priv->net_dev->dev.parent; +@@ -168,66 +158,57 @@ static struct sk_buff *dpaa2_eth_build_f + + dpaa2_sg_le_to_cpu(sge); + +- /* We don't support anything else yet! */ +- if (unlikely(dpaa2_sg_get_format(sge) != dpaa2_sg_single)) { +- dev_warn_once(dev, "Unsupported S/G entry format: %d\n", +- dpaa2_sg_get_format(sge)); +- return NULL; +- } ++ /* NOTE: We only support SG entries in dpaa2_sg_single format, ++ * but this is the only format we may receive from HW anyway ++ */ + +- /* Get the address, offset and length from the S/G entry */ ++ /* Get the address and length from the S/G entry */ + sg_addr = dpaa2_sg_get_addr(sge); +- dma_unmap_single(dev, sg_addr, DPAA2_ETH_RX_BUFFER_SIZE, ++ dma_unmap_single(dev, sg_addr, DPAA2_ETH_RX_BUF_SIZE, + DMA_FROM_DEVICE); +- if (unlikely(dma_mapping_error(dev, sg_addr))) { +- netdev_err(priv->net_dev, "DMA unmap failed\n"); +- return NULL; +- } ++ + sg_vaddr = phys_to_virt(sg_addr); + sg_length = dpaa2_sg_get_len(sge); + + if (i == 0) { + /* We build the skb around the first data buffer */ +- skb = build_skb(sg_vaddr, DPAA2_ETH_RX_BUFFER_SIZE + ++ skb = build_skb(sg_vaddr, DPAA2_ETH_RX_BUF_SIZE + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))); +- if (unlikely(!skb)) { +- netdev_err(priv->net_dev, "build_skb failed\n"); ++ if (unlikely(!skb)) + return NULL; +- } ++ + sg_offset = dpaa2_sg_get_offset(sge); + skb_reserve(skb, sg_offset); + skb_put(skb, sg_length); + } else { +- /* Subsequent data in SGEntries are stored at +- * offset 0 in their buffers, we don't need to +- * compute sg_offset. +- */ +- WARN_ONCE(dpaa2_sg_get_offset(sge) != 0, +- "Non-zero offset in SGE[%d]!\n", i); +- + /* Rest of the data buffers are stored as skb frags */ + page = virt_to_page(sg_vaddr); + head_page = virt_to_head_page(sg_vaddr); + +- /* Offset in page (which may be compound) */ ++ /* Offset in page (which may be compound). ++ * Data in subsequent SG entries is stored from the ++ * beginning of the buffer, so we don't need to add the ++ * sg_offset. ++ */ + page_offset = ((unsigned long)sg_vaddr & + (PAGE_SIZE - 1)) + + (page_address(page) - page_address(head_page)); + + skb_add_rx_frag(skb, i - 1, head_page, page_offset, +- sg_length, DPAA2_ETH_RX_BUFFER_SIZE); ++ sg_length, DPAA2_ETH_RX_BUF_SIZE); + } + + if (dpaa2_sg_is_final(sge)) + break; + } + +- /* Count all data buffers + sgt buffer */ ++ /* Count all data buffers + SG table buffer */ + ch->buf_count -= i + 2; + + return skb; + } + ++/* Main Rx frame processing routine */ + static void dpaa2_eth_rx(struct dpaa2_eth_priv *priv, + struct dpaa2_eth_channel *ch, + const struct dpaa2_fd *fd, +@@ -238,7 +219,7 @@ static void dpaa2_eth_rx(struct dpaa2_et + void *vaddr; + struct sk_buff *skb; + struct rtnl_link_stats64 *percpu_stats; +- struct dpaa2_eth_stats *percpu_extras; ++ struct dpaa2_eth_drv_stats *percpu_extras; + struct device *dev = priv->net_dev->dev.parent; + struct dpaa2_fas *fas; + u32 status = 0; +@@ -246,7 +227,7 @@ static void dpaa2_eth_rx(struct dpaa2_et + /* Tracing point */ + trace_dpaa2_rx_fd(priv->net_dev, fd); + +- dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUFFER_SIZE, DMA_FROM_DEVICE); ++ dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, DMA_FROM_DEVICE); + vaddr = phys_to_virt(addr); + + prefetch(vaddr + priv->buf_layout.private_data_size); +@@ -256,32 +237,30 @@ static void dpaa2_eth_rx(struct dpaa2_et + percpu_extras = this_cpu_ptr(priv->percpu_extras); + + if (fd_format == dpaa2_fd_single) { +- skb = dpaa2_eth_build_linear_skb(priv, ch, fd, vaddr); ++ skb = build_linear_skb(priv, ch, fd, vaddr); + } else if (fd_format == dpaa2_fd_sg) { + struct dpaa2_sg_entry *sgt = + vaddr + dpaa2_fd_get_offset(fd); +- skb = dpaa2_eth_build_frag_skb(priv, ch, sgt); ++ skb = build_frag_skb(priv, ch, sgt); + put_page(virt_to_head_page(vaddr)); + percpu_extras->rx_sg_frames++; + percpu_extras->rx_sg_bytes += dpaa2_fd_get_len(fd); + } else { + /* We don't support any other format */ +- netdev_err(priv->net_dev, "Received invalid frame format\n"); + goto err_frame_format; + } + +- if (unlikely(!skb)) { +- dev_err_once(dev, "error building skb\n"); ++ if (unlikely(!skb)) + goto err_build_skb; +- } + + prefetch(skb->data); + ++ /* Get the timestamp value */ + if (priv->ts_rx_en) { + struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb); +- u64 *ns = (u64 *) (vaddr + +- priv->buf_layout.private_data_size + +- sizeof(struct dpaa2_fas)); ++ u64 *ns = (u64 *)(vaddr + ++ priv->buf_layout.private_data_size + ++ sizeof(struct dpaa2_fas)); + + *ns = DPAA2_PTP_NOMINAL_FREQ_PERIOD_NS * (*ns); + memset(shhwtstamps, 0, sizeof(*shhwtstamps)); +@@ -293,7 +272,7 @@ static void dpaa2_eth_rx(struct dpaa2_et + fas = (struct dpaa2_fas *) + (vaddr + priv->buf_layout.private_data_size); + status = le32_to_cpu(fas->status); +- dpaa2_eth_rx_csum(priv, status, skb); ++ validate_rx_csum(priv, status, skb); + } + + skb->protocol = eth_type_trans(skb, priv->net_dev); +@@ -309,11 +288,14 @@ static void dpaa2_eth_rx(struct dpaa2_et + return; + err_frame_format: + err_build_skb: +- dpaa2_eth_free_rx_fd(priv, fd, vaddr); ++ free_rx_fd(priv, fd, vaddr); + percpu_stats->rx_dropped++; + } + + #ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE ++/* Processing of Rx frames received on the error FQ ++ * We check and print the error bits and then free the frame ++ */ + static void dpaa2_eth_rx_err(struct dpaa2_eth_priv *priv, + struct dpaa2_eth_channel *ch, + const struct dpaa2_fd *fd, +@@ -326,21 +308,18 @@ static void dpaa2_eth_rx_err(struct dpaa + struct dpaa2_fas *fas; + u32 status = 0; + +- dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUFFER_SIZE, DMA_FROM_DEVICE); ++ dma_unmap_single(dev, addr, DPAA2_ETH_RX_BUF_SIZE, DMA_FROM_DEVICE); + vaddr = phys_to_virt(addr); + + if (fd->simple.frc & DPAA2_FD_FRC_FASV) { + fas = (struct dpaa2_fas *) + (vaddr + priv->buf_layout.private_data_size); + status = le32_to_cpu(fas->status); +- +- /* All frames received on this queue should have at least +- * one of the Rx error bits set */ +- WARN_ON_ONCE((status & DPAA2_ETH_RX_ERR_MASK) == 0); +- netdev_dbg(priv->net_dev, "Rx frame error: 0x%08x\n", +- status & DPAA2_ETH_RX_ERR_MASK); ++ if (net_ratelimit()) ++ netdev_warn(priv->net_dev, "Rx frame error: 0x%08x\n", ++ status & DPAA2_ETH_RX_ERR_MASK); + } +- dpaa2_eth_free_rx_fd(priv, fd, vaddr); ++ free_rx_fd(priv, fd, vaddr); + + percpu_stats = this_cpu_ptr(priv->percpu_stats); + percpu_stats->rx_errors++; +@@ -353,7 +332,7 @@ static void dpaa2_eth_rx_err(struct dpaa + * + * Observance of NAPI budget is not our concern, leaving that to the caller. + */ +-static int dpaa2_eth_store_consume(struct dpaa2_eth_channel *ch) ++static int consume_frames(struct dpaa2_eth_channel *ch) + { + struct dpaa2_eth_priv *priv = ch->priv; + struct dpaa2_eth_fq *fq; +@@ -365,20 +344,14 @@ static int dpaa2_eth_store_consume(struc + do { + dq = dpaa2_io_store_next(ch->store, &is_last); + if (unlikely(!dq)) { +- if (unlikely(!is_last)) { +- netdev_dbg(priv->net_dev, +- "Channel %d reqturned no valid frames\n", +- ch->ch_id); +- /* MUST retry until we get some sort of +- * valid response token (be it "empty dequeue" +- * or a valid frame). +- */ +- continue; +- } +- break; ++ /* If we're here, we *must* have placed a ++ * volatile dequeue comnmand, so keep reading through ++ * the store until we get some sort of valid response ++ * token (either a valid frame or an "empty dequeue") ++ */ ++ continue; + } + +- /* Obtain FD and process it */ + fd = dpaa2_dq_fd(dq); + fq = (struct dpaa2_eth_fq *)dpaa2_dq_fqd_ctx(dq); + fq->stats.frames++; +@@ -390,9 +363,10 @@ static int dpaa2_eth_store_consume(struc + return cleaned; + } + +-static int dpaa2_eth_build_sg_fd(struct dpaa2_eth_priv *priv, +- struct sk_buff *skb, +- struct dpaa2_fd *fd) ++/* Create a frame descriptor based on a fragmented skb */ ++static int build_sg_fd(struct dpaa2_eth_priv *priv, ++ struct sk_buff *skb, ++ struct dpaa2_fd *fd) + { + struct device *dev = priv->net_dev->dev.parent; + void *sgt_buf = NULL; +@@ -404,14 +378,16 @@ static int dpaa2_eth_build_sg_fd(struct + struct scatterlist *scl, *crt_scl; + int num_sg; + int num_dma_bufs; +- struct dpaa2_eth_swa *bps; ++ struct dpaa2_eth_swa *swa; + + /* Create and map scatterlist. + * We don't advertise NETIF_F_FRAGLIST, so skb_to_sgvec() will not have + * to go beyond nr_frags+1. + * Note: We don't support chained scatterlists + */ +- WARN_ON(PAGE_SIZE / sizeof(struct scatterlist) < nr_frags + 1); ++ if (unlikely(PAGE_SIZE / sizeof(struct scatterlist) < nr_frags + 1)) ++ return -EINVAL; ++ + scl = kcalloc(nr_frags + 1, sizeof(struct scatterlist), GFP_ATOMIC); + if (unlikely(!scl)) + return -ENOMEM; +@@ -420,7 +396,6 @@ static int dpaa2_eth_build_sg_fd(struct + num_sg = skb_to_sgvec(skb, scl, 0, skb->len); + num_dma_bufs = dma_map_sg(dev, scl, num_sg, DMA_TO_DEVICE); + if (unlikely(!num_dma_bufs)) { +- netdev_err(priv->net_dev, "dma_map_sg() error\n"); + err = -ENOMEM; + goto dma_map_sg_failed; + } +@@ -430,7 +405,6 @@ static int dpaa2_eth_build_sg_fd(struct + sizeof(struct dpaa2_sg_entry) * (1 + num_dma_bufs); + sgt_buf = kzalloc(sgt_buf_size + DPAA2_ETH_TX_BUF_ALIGN, GFP_ATOMIC); + if (unlikely(!sgt_buf)) { +- netdev_err(priv->net_dev, "failed to allocate SGT buffer\n"); + err = -ENOMEM; + goto sgt_buf_alloc_failed; + } +@@ -462,19 +436,19 @@ static int dpaa2_eth_build_sg_fd(struct + * Fit the scatterlist and the number of buffers alongside the + * skb backpointer in the SWA. We'll need all of them on Tx Conf. + */ +- bps = (struct dpaa2_eth_swa *)sgt_buf; +- bps->skb = skb; +- bps->scl = scl; +- bps->num_sg = num_sg; +- bps->num_dma_bufs = num_dma_bufs; ++ swa = (struct dpaa2_eth_swa *)sgt_buf; ++ swa->skb = skb; ++ swa->scl = scl; ++ swa->num_sg = num_sg; ++ swa->num_dma_bufs = num_dma_bufs; + ++ /* Hardware expects the SG table to be in little endian format */ + for (j = 0; j < i; j++) + dpaa2_sg_cpu_to_le(&sgt[j]); + + /* Separately map the SGT buffer */ + addr = dma_map_single(dev, sgt_buf, sgt_buf_size, DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(dev, addr))) { +- netdev_err(priv->net_dev, "dma_map_single() failed\n"); + err = -ENOMEM; + goto dma_map_single_failed; + } +@@ -484,7 +458,7 @@ static int dpaa2_eth_build_sg_fd(struct + dpaa2_fd_set_len(fd, skb->len); + + fd->simple.ctrl = DPAA2_FD_CTRL_ASAL | DPAA2_FD_CTRL_PTA | +- DPAA2_FD_CTRL_PTV1; ++ DPAA2_FD_CTRL_PTV1; + + return 0; + +@@ -497,9 +471,10 @@ dma_map_sg_failed: + return err; + } + +-static int dpaa2_eth_build_single_fd(struct dpaa2_eth_priv *priv, +- struct sk_buff *skb, +- struct dpaa2_fd *fd) ++/* Create a frame descriptor based on a linear skb */ ++static int build_single_fd(struct dpaa2_eth_priv *priv, ++ struct sk_buff *skb, ++ struct dpaa2_fd *fd) + { + struct device *dev = priv->net_dev->dev.parent; + u8 *buffer_start; +@@ -524,14 +499,11 @@ static int dpaa2_eth_build_single_fd(str + skbh = (struct sk_buff **)buffer_start; + *skbh = skb; + +- addr = dma_map_single(dev, +- buffer_start, ++ addr = dma_map_single(dev, buffer_start, + skb_tail_pointer(skb) - buffer_start, + DMA_TO_DEVICE); +- if (unlikely(dma_mapping_error(dev, addr))) { +- dev_err(dev, "dma_map_single() failed\n"); +- return -EINVAL; +- } ++ if (unlikely(dma_mapping_error(dev, addr))) ++ return -ENOMEM; + + dpaa2_fd_set_addr(fd, addr); + dpaa2_fd_set_offset(fd, (u16)(skb->data - buffer_start)); +@@ -539,21 +511,23 @@ static int dpaa2_eth_build_single_fd(str + dpaa2_fd_set_format(fd, dpaa2_fd_single); + + fd->simple.ctrl = DPAA2_FD_CTRL_ASAL | DPAA2_FD_CTRL_PTA | +- DPAA2_FD_CTRL_PTV1; ++ DPAA2_FD_CTRL_PTV1; + + return 0; + } + +-/* DMA-unmap and free FD and possibly SGT buffer allocated on Tx. The skb ++/* FD freeing routine on the Tx path ++ * ++ * DMA-unmap and free FD and possibly SGT buffer allocated on Tx. The skb + * back-pointed to is also freed. + * This can be called either from dpaa2_eth_tx_conf() or on the error path of + * dpaa2_eth_tx(). + * Optionally, return the frame annotation status word (FAS), which needs + * to be checked if we're on the confirmation path. + */ +-static void dpaa2_eth_free_fd(const struct dpaa2_eth_priv *priv, +- const struct dpaa2_fd *fd, +- u32 *status) ++static void free_tx_fd(const struct dpaa2_eth_priv *priv, ++ const struct dpaa2_fd *fd, ++ u32 *status) + { + struct device *dev = priv->net_dev->dev.parent; + dma_addr_t fd_addr; +@@ -562,7 +536,7 @@ static void dpaa2_eth_free_fd(const stru + int unmap_size; + struct scatterlist *scl; + int num_sg, num_dma_bufs; +- struct dpaa2_eth_swa *bps; ++ struct dpaa2_eth_swa *swa; + bool fd_single; + struct dpaa2_fas *fas; + +@@ -580,11 +554,11 @@ static void dpaa2_eth_free_fd(const stru + skb_tail_pointer(skb) - buffer_start, + DMA_TO_DEVICE); + } else { +- bps = (struct dpaa2_eth_swa *)skbh; +- skb = bps->skb; +- scl = bps->scl; +- num_sg = bps->num_sg; +- num_dma_bufs = bps->num_dma_bufs; ++ swa = (struct dpaa2_eth_swa *)skbh; ++ skb = swa->skb; ++ scl = swa->scl; ++ num_sg = swa->num_sg; ++ num_dma_bufs = swa->num_dma_bufs; + + /* Unmap the scatterlist */ + dma_unmap_sg(dev, scl, num_sg, DMA_TO_DEVICE); +@@ -596,6 +570,7 @@ static void dpaa2_eth_free_fd(const stru + dma_unmap_single(dev, fd_addr, unmap_size, DMA_TO_DEVICE); + } + ++ /* Get the timestamp value */ + if (priv->ts_tx_en && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { + struct skb_shared_hwtstamps shhwtstamps; + u64 *ns; +@@ -610,8 +585,9 @@ static void dpaa2_eth_free_fd(const stru + skb_tstamp_tx(skb, &shhwtstamps); + } + +- /* Check the status from the Frame Annotation after we unmap the first +- * buffer but before we free it. ++ /* Read the status from the Frame Annotation after we unmap the first ++ * buffer but before we free it. The caller function is responsible ++ * for checking the status value. + */ + if (status && (fd->simple.frc & DPAA2_FD_FRC_FASV)) { + fas = (struct dpaa2_fas *) +@@ -632,24 +608,16 @@ static int dpaa2_eth_tx(struct sk_buff * + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + struct dpaa2_fd fd; + struct rtnl_link_stats64 *percpu_stats; +- struct dpaa2_eth_stats *percpu_extras; ++ struct dpaa2_eth_drv_stats *percpu_extras; ++ u16 queue_mapping, flow_id; + int err, i; +- /* TxConf FQ selection primarily based on cpu affinity; this is +- * non-migratable context, so it's safe to call smp_processor_id(). +- */ +- u16 queue_mapping = smp_processor_id() % priv->dpni_attrs.max_senders; + + percpu_stats = this_cpu_ptr(priv->percpu_stats); + percpu_extras = this_cpu_ptr(priv->percpu_extras); + +- /* Setup the FD fields */ +- memset(&fd, 0, sizeof(fd)); +- + if (unlikely(skb_headroom(skb) < DPAA2_ETH_NEEDED_HEADROOM(priv))) { + struct sk_buff *ns; + +- dev_info_once(net_dev->dev.parent, +- "skb headroom too small, must realloc.\n"); + ns = skb_realloc_headroom(skb, DPAA2_ETH_NEEDED_HEADROOM(priv)); + if (unlikely(!ns)) { + percpu_stats->tx_dropped++; +@@ -664,18 +632,20 @@ static int dpaa2_eth_tx(struct sk_buff * + */ + skb = skb_unshare(skb, GFP_ATOMIC); + if (unlikely(!skb)) { +- netdev_err(net_dev, "Out of memory for skb_unshare()"); + /* skb_unshare() has already freed the skb */ + percpu_stats->tx_dropped++; + return NETDEV_TX_OK; + } + ++ /* Setup the FD fields */ ++ memset(&fd, 0, sizeof(fd)); ++ + if (skb_is_nonlinear(skb)) { +- err = dpaa2_eth_build_sg_fd(priv, skb, &fd); ++ err = build_sg_fd(priv, skb, &fd); + percpu_extras->tx_sg_frames++; + percpu_extras->tx_sg_bytes += skb->len; + } else { +- err = dpaa2_eth_build_single_fd(priv, skb, &fd); ++ err = build_single_fd(priv, skb, &fd); + } + + if (unlikely(err)) { +@@ -686,19 +656,22 @@ static int dpaa2_eth_tx(struct sk_buff * + /* Tracing point */ + trace_dpaa2_tx_fd(net_dev, &fd); + ++ /* TxConf FQ selection primarily based on cpu affinity; this is ++ * non-migratable context, so it's safe to call smp_processor_id(). ++ */ ++ queue_mapping = smp_processor_id() % priv->dpni_attrs.max_senders; ++ flow_id = priv->fq[queue_mapping].flowid; + for (i = 0; i < (DPAA2_ETH_MAX_TX_QUEUES << 1); i++) { + err = dpaa2_io_service_enqueue_qd(NULL, priv->tx_qdid, 0, +- priv->fq[queue_mapping].flowid, +- &fd); ++ flow_id, &fd); + if (err != -EBUSY) + break; + } + percpu_extras->tx_portal_busy += i; + if (unlikely(err < 0)) { +- netdev_dbg(net_dev, "error enqueueing Tx frame\n"); + percpu_stats->tx_errors++; + /* Clean up everything, including freeing the skb */ +- dpaa2_eth_free_fd(priv, &fd, NULL); ++ free_tx_fd(priv, &fd, NULL); + } else { + percpu_stats->tx_packets++; + percpu_stats->tx_bytes += skb->len; +@@ -713,13 +686,14 @@ err_alloc_headroom: + return NETDEV_TX_OK; + } + ++/* Tx confirmation frame processing routine */ + static void dpaa2_eth_tx_conf(struct dpaa2_eth_priv *priv, + struct dpaa2_eth_channel *ch, + const struct dpaa2_fd *fd, + struct napi_struct *napi __always_unused) + { + struct rtnl_link_stats64 *percpu_stats; +- struct dpaa2_eth_stats *percpu_extras; ++ struct dpaa2_eth_drv_stats *percpu_extras; + u32 status = 0; + + /* Tracing point */ +@@ -729,18 +703,16 @@ static void dpaa2_eth_tx_conf(struct dpa + percpu_extras->tx_conf_frames++; + percpu_extras->tx_conf_bytes += dpaa2_fd_get_len(fd); + +- dpaa2_eth_free_fd(priv, fd, &status); ++ free_tx_fd(priv, fd, &status); + + if (unlikely(status & DPAA2_ETH_TXCONF_ERR_MASK)) { +- netdev_err(priv->net_dev, "TxConf frame error(s): 0x%08x\n", +- status & DPAA2_ETH_TXCONF_ERR_MASK); + percpu_stats = this_cpu_ptr(priv->percpu_stats); + /* Tx-conf logically pertains to the egress path. */ + percpu_stats->tx_errors++; + } + } + +-static int dpaa2_eth_set_rx_csum(struct dpaa2_eth_priv *priv, bool enable) ++static int set_rx_csum(struct dpaa2_eth_priv *priv, bool enable) + { + int err; + +@@ -763,7 +735,7 @@ static int dpaa2_eth_set_rx_csum(struct + return 0; + } + +-static int dpaa2_eth_set_tx_csum(struct dpaa2_eth_priv *priv, bool enable) ++static int set_tx_csum(struct dpaa2_eth_priv *priv, bool enable) + { + struct dpaa2_eth_fq *fq; + struct dpni_tx_flow_cfg tx_flow_cfg; +@@ -793,37 +765,38 @@ static int dpaa2_eth_set_tx_csum(struct + return 0; + } + +-static int dpaa2_bp_add_7(struct dpaa2_eth_priv *priv, u16 bpid) ++/* Perform a single release command to add buffers ++ * to the specified buffer pool ++ */ ++static int add_bufs(struct dpaa2_eth_priv *priv, u16 bpid) + { + struct device *dev = priv->net_dev->dev.parent; +- u64 buf_array[7]; ++ u64 buf_array[DPAA2_ETH_BUFS_PER_CMD]; + void *buf; + dma_addr_t addr; + int i; + +- for (i = 0; i < 7; i++) { ++ for (i = 0; i < DPAA2_ETH_BUFS_PER_CMD; i++) { + /* Allocate buffer visible to WRIOP + skb shared info + + * alignment padding + */ + buf = napi_alloc_frag(DPAA2_ETH_BUF_RAW_SIZE); +- if (unlikely(!buf)) { +- dev_err(dev, "buffer allocation failed\n"); ++ if (unlikely(!buf)) + goto err_alloc; +- } ++ + buf = PTR_ALIGN(buf, DPAA2_ETH_RX_BUF_ALIGN); + +- addr = dma_map_single(dev, buf, DPAA2_ETH_RX_BUFFER_SIZE, ++ addr = dma_map_single(dev, buf, DPAA2_ETH_RX_BUF_SIZE, + DMA_FROM_DEVICE); +- if (unlikely(dma_mapping_error(dev, addr))) { +- dev_err(dev, "dma_map_single() failed\n"); ++ if (unlikely(dma_mapping_error(dev, addr))) + goto err_map; +- } ++ + buf_array[i] = addr; + + /* tracing point */ + trace_dpaa2_eth_buf_seed(priv->net_dev, + buf, DPAA2_ETH_BUF_RAW_SIZE, +- addr, DPAA2_ETH_RX_BUFFER_SIZE, ++ addr, DPAA2_ETH_RX_BUF_SIZE, + bpid); + } + +@@ -850,59 +823,57 @@ err_alloc: + return 0; + } + +-static int dpaa2_dpbp_seed(struct dpaa2_eth_priv *priv, u16 bpid) ++static int seed_pool(struct dpaa2_eth_priv *priv, u16 bpid) + { + int i, j; + int new_count; + + /* This is the lazy seeding of Rx buffer pools. +- * dpaa2_bp_add_7() is also used on the Rx hotpath and calls ++ * dpaa2_add_bufs() is also used on the Rx hotpath and calls + * napi_alloc_frag(). The trouble with that is that it in turn ends up + * calling this_cpu_ptr(), which mandates execution in atomic context. + * Rather than splitting up the code, do a one-off preempt disable. + */ + preempt_disable(); + for (j = 0; j < priv->num_channels; j++) { +- for (i = 0; i < DPAA2_ETH_NUM_BUFS; i += 7) { +- new_count = dpaa2_bp_add_7(priv, bpid); ++ for (i = 0; i < DPAA2_ETH_NUM_BUFS; ++ i += DPAA2_ETH_BUFS_PER_CMD) { ++ new_count = add_bufs(priv, bpid); + priv->channel[j]->buf_count += new_count; + +- if (new_count < 7) { ++ if (new_count < DPAA2_ETH_BUFS_PER_CMD) { + preempt_enable(); +- goto out_of_memory; ++ return -ENOMEM; + } + } + } + preempt_enable(); + + return 0; +- +-out_of_memory: +- return -ENOMEM; + } + + /** + * Drain the specified number of buffers from the DPNI's private buffer pool. +- * @count must not exceeed 7 ++ * @count must not exceeed DPAA2_ETH_BUFS_PER_CMD + */ +-static void dpaa2_dpbp_drain_cnt(struct dpaa2_eth_priv *priv, int count) ++static void drain_bufs(struct dpaa2_eth_priv *priv, int count) + { + struct device *dev = priv->net_dev->dev.parent; +- u64 buf_array[7]; ++ u64 buf_array[DPAA2_ETH_BUFS_PER_CMD]; + void *vaddr; + int ret, i; + + do { + ret = dpaa2_io_service_acquire(NULL, priv->dpbp_attrs.bpid, +- buf_array, count); ++ buf_array, count); + if (ret < 0) { +- pr_err("dpaa2_io_service_acquire() failed\n"); ++ netdev_err(priv->net_dev, "dpaa2_io_service_acquire() failed\n"); + return; + } + for (i = 0; i < ret; i++) { + /* Same logic as on regular Rx path */ + dma_unmap_single(dev, buf_array[i], +- DPAA2_ETH_RX_BUFFER_SIZE, ++ DPAA2_ETH_RX_BUF_SIZE, + DMA_FROM_DEVICE); + vaddr = phys_to_virt(buf_array[i]); + put_page(virt_to_head_page(vaddr)); +@@ -910,12 +881,12 @@ static void dpaa2_dpbp_drain_cnt(struct + } while (ret); + } + +-static void __dpaa2_dpbp_free(struct dpaa2_eth_priv *priv) ++static void drain_pool(struct dpaa2_eth_priv *priv) + { + int i; + +- dpaa2_dpbp_drain_cnt(priv, 7); +- dpaa2_dpbp_drain_cnt(priv, 1); ++ drain_bufs(priv, DPAA2_ETH_BUFS_PER_CMD); ++ drain_bufs(priv, 1); + + for (i = 0; i < priv->num_channels; i++) + priv->channel[i]->buf_count = 0; +@@ -924,50 +895,55 @@ static void __dpaa2_dpbp_free(struct dpa + /* Function is called from softirq context only, so we don't need to guard + * the access to percpu count + */ +-static int dpaa2_dpbp_refill(struct dpaa2_eth_priv *priv, +- struct dpaa2_eth_channel *ch, +- u16 bpid) ++static int refill_pool(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch, ++ u16 bpid) + { + int new_count; +- int err = 0; + +- if (unlikely(ch->buf_count < DPAA2_ETH_REFILL_THRESH)) { +- do { +- new_count = dpaa2_bp_add_7(priv, bpid); +- if (unlikely(!new_count)) { +- /* Out of memory; abort for now, we'll +- * try later on +- */ +- break; +- } +- ch->buf_count += new_count; +- } while (ch->buf_count < DPAA2_ETH_NUM_BUFS); ++ if (likely(ch->buf_count >= DPAA2_ETH_REFILL_THRESH)) ++ return 0; + +- if (unlikely(ch->buf_count < DPAA2_ETH_NUM_BUFS)) +- err = -ENOMEM; +- } ++ do { ++ new_count = add_bufs(priv, bpid); ++ if (unlikely(!new_count)) { ++ /* Out of memory; abort for now, we'll try later on */ ++ break; ++ } ++ ch->buf_count += new_count; ++ } while (ch->buf_count < DPAA2_ETH_NUM_BUFS); + +- return err; ++ if (unlikely(ch->buf_count < DPAA2_ETH_NUM_BUFS)) ++ return -ENOMEM; ++ ++ return 0; + } + +-static int __dpaa2_eth_pull_channel(struct dpaa2_eth_channel *ch) ++static int pull_channel(struct dpaa2_eth_channel *ch) + { + int err; + int dequeues = -1; +- struct dpaa2_eth_priv *priv = ch->priv; + + /* Retry while portal is busy */ + do { + err = dpaa2_io_service_pull_channel(NULL, ch->ch_id, ch->store); + dequeues++; ++ cpu_relax(); + } while (err == -EBUSY); +- if (unlikely(err)) +- netdev_err(priv->net_dev, "dpaa2_io_service_pull err %d", err); + + ch->stats.dequeue_portal_busy += dequeues; ++ if (unlikely(err)) ++ ch->stats.pull_err++; ++ + return err; + } + ++/* NAPI poll routine ++ * ++ * Frames are dequeued from the QMan channel associated with this NAPI context. ++ * Rx, Tx confirmation and (if configured) Rx error frames all count ++ * towards the NAPI budget. ++ */ + static int dpaa2_eth_poll(struct napi_struct *napi, int budget) + { + struct dpaa2_eth_channel *ch; +@@ -978,32 +954,32 @@ static int dpaa2_eth_poll(struct napi_st + ch = container_of(napi, struct dpaa2_eth_channel, napi); + priv = ch->priv; + +- __dpaa2_eth_pull_channel(ch); ++ while (cleaned < budget) { ++ err = pull_channel(ch); ++ if (unlikely(err)) ++ break; + +- do { + /* Refill pool if appropriate */ +- dpaa2_dpbp_refill(priv, ch, priv->dpbp_attrs.bpid); ++ refill_pool(priv, ch, priv->dpbp_attrs.bpid); + +- store_cleaned = dpaa2_eth_store_consume(ch); ++ store_cleaned = consume_frames(ch); + cleaned += store_cleaned; + ++ /* If we have enough budget left for a full store, ++ * try a new pull dequeue, otherwise we're done here ++ */ + if (store_cleaned == 0 || + cleaned > budget - DPAA2_ETH_STORE_SIZE) + break; +- +- /* Try to dequeue some more */ +- err = __dpaa2_eth_pull_channel(ch); +- if (unlikely(err)) +- break; +- } while (1); ++ } + + if (cleaned < budget) { + napi_complete_done(napi, cleaned); +- err = dpaa2_io_service_rearm(NULL, &ch->nctx); +- if (unlikely(err)) +- netdev_err(priv->net_dev, +- "Notif rearm failed for channel %d\n", +- ch->ch_id); ++ /* Re-enable data available notifications */ ++ do { ++ err = dpaa2_io_service_rearm(NULL, &ch->nctx); ++ cpu_relax(); ++ } while (err == -EBUSY); + } + + ch->stats.frames += cleaned; +@@ -1011,7 +987,7 @@ static int dpaa2_eth_poll(struct napi_st + return cleaned; + } + +-static void dpaa2_eth_napi_enable(struct dpaa2_eth_priv *priv) ++static void enable_ch_napi(struct dpaa2_eth_priv *priv) + { + struct dpaa2_eth_channel *ch; + int i; +@@ -1022,7 +998,7 @@ static void dpaa2_eth_napi_enable(struct + } + } + +-static void dpaa2_eth_napi_disable(struct dpaa2_eth_priv *priv) ++static void disable_ch_napi(struct dpaa2_eth_priv *priv) + { + struct dpaa2_eth_channel *ch; + int i; +@@ -1033,7 +1009,7 @@ static void dpaa2_eth_napi_disable(struc + } + } + +-static int dpaa2_link_state_update(struct dpaa2_eth_priv *priv) ++static int link_state_update(struct dpaa2_eth_priv *priv) + { + struct dpni_link_state state; + int err; +@@ -1069,7 +1045,7 @@ static int dpaa2_eth_open(struct net_dev + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + int err; + +- err = dpaa2_dpbp_seed(priv, priv->dpbp_attrs.bpid); ++ err = seed_pool(priv, priv->dpbp_attrs.bpid); + if (err) { + /* Not much to do; the buffer pool, though not filled up, + * may still contain some buffers which would enable us +@@ -1084,7 +1060,7 @@ static int dpaa2_eth_open(struct net_dev + * immediately after dpni_enable(); + */ + netif_tx_stop_all_queues(net_dev); +- dpaa2_eth_napi_enable(priv); ++ enable_ch_napi(priv); + /* Also, explicitly set carrier off, otherwise netif_carrier_ok() will + * return true and cause 'ip link show' to report the LOWER_UP flag, + * even though the link notification wasn't even received. +@@ -1093,16 +1069,16 @@ static int dpaa2_eth_open(struct net_dev + + err = dpni_enable(priv->mc_io, 0, priv->mc_token); + if (err < 0) { +- dev_err(net_dev->dev.parent, "dpni_enable() failed\n"); ++ netdev_err(net_dev, "dpni_enable() failed\n"); + goto enable_err; + } + + /* If the DPMAC object has already processed the link up interrupt, + * we have to learn the link state ourselves. + */ +- err = dpaa2_link_state_update(priv); ++ err = link_state_update(priv); + if (err < 0) { +- dev_err(net_dev->dev.parent, "Can't update link state\n"); ++ netdev_err(net_dev, "Can't update link state\n"); + goto link_state_err; + } + +@@ -1110,26 +1086,84 @@ static int dpaa2_eth_open(struct net_dev + + link_state_err: + enable_err: +- dpaa2_eth_napi_disable(priv); +- __dpaa2_dpbp_free(priv); ++ disable_ch_napi(priv); ++ drain_pool(priv); + return err; + } + ++/* The DPIO store must be empty when we call this, ++ * at the end of every NAPI cycle. ++ */ ++static u32 drain_channel(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *ch) ++{ ++ u32 drained = 0, total = 0; ++ ++ do { ++ pull_channel(ch); ++ drained = consume_frames(ch); ++ total += drained; ++ } while (drained); ++ ++ return total; ++} ++ ++static u32 drain_ingress_frames(struct dpaa2_eth_priv *priv) ++{ ++ struct dpaa2_eth_channel *ch; ++ int i; ++ u32 drained = 0; ++ ++ for (i = 0; i < priv->num_channels; i++) { ++ ch = priv->channel[i]; ++ drained += drain_channel(priv, ch); ++ } ++ ++ return drained; ++} ++ + static int dpaa2_eth_stop(struct net_device *net_dev) + { + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ int dpni_enabled; ++ int retries = 10; ++ u32 drained; + +- /* Stop Tx and Rx traffic */ + netif_tx_stop_all_queues(net_dev); + netif_carrier_off(net_dev); +- dpni_disable(priv->mc_io, 0, priv->mc_token); + +- msleep(500); ++ /* Loop while dpni_disable() attempts to drain the egress FQs ++ * and confirm them back to us. ++ */ ++ do { ++ dpni_disable(priv->mc_io, 0, priv->mc_token); ++ dpni_is_enabled(priv->mc_io, 0, priv->mc_token, &dpni_enabled); ++ if (dpni_enabled) ++ /* Allow the MC some slack */ ++ msleep(100); ++ } while (dpni_enabled && --retries); ++ if (!retries) { ++ netdev_warn(net_dev, "Retry count exceeded disabling DPNI\n"); ++ /* Must go on and disable NAPI nonetheless, so we don't crash at ++ * the next "ifconfig up" ++ */ ++ } + +- dpaa2_eth_napi_disable(priv); +- msleep(100); ++ /* Wait for NAPI to complete on every core and disable it. ++ * In particular, this will also prevent NAPI from being rescheduled if ++ * a new CDAN is serviced, effectively discarding the CDAN. We therefore ++ * don't even need to disarm the channels, except perhaps for the case ++ * of a huge coalescing value. ++ */ ++ disable_ch_napi(priv); ++ ++ /* Manually drain the Rx and TxConf queues */ ++ drained = drain_ingress_frames(priv); ++ if (drained) ++ netdev_dbg(net_dev, "Drained %d frames.\n", drained); + +- __dpaa2_dpbp_free(priv); ++ /* Empty the buffer pool */ ++ drain_pool(priv); + + return 0; + } +@@ -1138,7 +1172,7 @@ static int dpaa2_eth_init(struct net_dev + { + u64 supported = 0; + u64 not_supported = 0; +- const struct dpaa2_eth_priv *priv = netdev_priv(net_dev); ++ struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + u32 options = priv->dpni_attrs.options; + + /* Capabilities listing */ +@@ -1230,7 +1264,7 @@ static int dpaa2_eth_change_mtu(struct n + err = dpni_set_max_frame_length(priv->mc_io, 0, priv->mc_token, + (u16)DPAA2_ETH_L2_MAX_FRM(mtu)); + if (err) { +- netdev_err(net_dev, "dpni_set_mfl() failed\n"); ++ netdev_err(net_dev, "dpni_set_max_frame_length() failed\n"); + return err; + } + +@@ -1238,18 +1272,11 @@ static int dpaa2_eth_change_mtu(struct n + return 0; + } + +-/* Convenience macro to make code littered with error checking more readable */ +-#define DPAA2_ETH_WARN_IF_ERR(err, netdevp, format, ...) \ +-do { \ +- if (err) \ +- netdev_warn(netdevp, format, ##__VA_ARGS__); \ +-} while (0) +- + /* Copy mac unicast addresses from @net_dev to @priv. + * Its sole purpose is to make dpaa2_eth_set_rx_mode() more readable. + */ +-static void _dpaa2_eth_hw_add_uc_addr(const struct net_device *net_dev, +- struct dpaa2_eth_priv *priv) ++static void add_uc_hw_addr(const struct net_device *net_dev, ++ struct dpaa2_eth_priv *priv) + { + struct netdev_hw_addr *ha; + int err; +@@ -1257,17 +1284,18 @@ static void _dpaa2_eth_hw_add_uc_addr(co + netdev_for_each_uc_addr(ha, net_dev) { + err = dpni_add_mac_addr(priv->mc_io, 0, priv->mc_token, + ha->addr); +- DPAA2_ETH_WARN_IF_ERR(err, priv->net_dev, +- "Could not add ucast MAC %pM to the filtering table (err %d)\n", +- ha->addr, err); ++ if (err) ++ netdev_warn(priv->net_dev, ++ "Could not add ucast MAC %pM to the filtering table (err %d)\n", ++ ha->addr, err); + } + } + + /* Copy mac multicast addresses from @net_dev to @priv + * Its sole purpose is to make dpaa2_eth_set_rx_mode() more readable. + */ +-static void _dpaa2_eth_hw_add_mc_addr(const struct net_device *net_dev, +- struct dpaa2_eth_priv *priv) ++static void add_mc_hw_addr(const struct net_device *net_dev, ++ struct dpaa2_eth_priv *priv) + { + struct netdev_hw_addr *ha; + int err; +@@ -1275,9 +1303,10 @@ static void _dpaa2_eth_hw_add_mc_addr(co + netdev_for_each_mc_addr(ha, net_dev) { + err = dpni_add_mac_addr(priv->mc_io, 0, priv->mc_token, + ha->addr); +- DPAA2_ETH_WARN_IF_ERR(err, priv->net_dev, +- "Could not add mcast MAC %pM to the filtering table (err %d)\n", +- ha->addr, err); ++ if (err) ++ netdev_warn(priv->net_dev, ++ "Could not add mcast MAC %pM to the filtering table (err %d)\n", ++ ha->addr, err); + } + } + +@@ -1296,11 +1325,11 @@ static void dpaa2_eth_set_rx_mode(struct + /* Basic sanity checks; these probably indicate a misconfiguration */ + if (!(options & DPNI_OPT_UNICAST_FILTER) && max_uc != 0) + netdev_info(net_dev, +- "max_unicast_filters=%d, you must have DPNI_OPT_UNICAST_FILTER in the DPL\n", ++ "max_unicast_filters=%d, DPNI_OPT_UNICAST_FILTER option must be enabled\n", + max_uc); + if (!(options & DPNI_OPT_MULTICAST_FILTER) && max_mc != 0) + netdev_info(net_dev, +- "max_multicast_filters=%d, you must have DPNI_OPT_MULTICAST_FILTER in the DPL\n", ++ "max_multicast_filters=%d, DPNI_OPT_MULTICAST_FILTER option must be enabled\n", + max_mc); + + /* Force promiscuous if the uc or mc counts exceed our capabilities. */ +@@ -1318,9 +1347,9 @@ static void dpaa2_eth_set_rx_mode(struct + } + + /* Adjust promisc settings due to flag combinations */ +- if (net_dev->flags & IFF_PROMISC) { ++ if (net_dev->flags & IFF_PROMISC) + goto force_promisc; +- } else if (net_dev->flags & IFF_ALLMULTI) { ++ if (net_dev->flags & IFF_ALLMULTI) { + /* First, rebuild unicast filtering table. This should be done + * in promisc mode, in order to avoid frame loss while we + * progressively add entries to the table. +@@ -1329,16 +1358,19 @@ static void dpaa2_eth_set_rx_mode(struct + * nonetheless. + */ + err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 1); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set uc promisc\n"); ++ if (err) ++ netdev_warn(net_dev, "Can't set uc promisc\n"); + + /* Actual uc table reconstruction. */ + err = dpni_clear_mac_filters(mc_io, 0, mc_token, 1, 0); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear uc filters\n"); +- _dpaa2_eth_hw_add_uc_addr(net_dev, priv); ++ if (err) ++ netdev_warn(net_dev, "Can't clear uc filters\n"); ++ add_uc_hw_addr(net_dev, priv); + + /* Finally, clear uc promisc and set mc promisc as requested. */ + err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 0); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear uc promisc\n"); ++ if (err) ++ netdev_warn(net_dev, "Can't clear uc promisc\n"); + goto force_mc_promisc; + } + +@@ -1346,32 +1378,39 @@ static void dpaa2_eth_set_rx_mode(struct + * For now, rebuild mac filtering tables while forcing both of them on. + */ + err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 1); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set uc promisc (%d)\n", err); ++ if (err) ++ netdev_warn(net_dev, "Can't set uc promisc (%d)\n", err); + err = dpni_set_multicast_promisc(mc_io, 0, mc_token, 1); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set mc promisc (%d)\n", err); ++ if (err) ++ netdev_warn(net_dev, "Can't set mc promisc (%d)\n", err); + + /* Actual mac filtering tables reconstruction */ + err = dpni_clear_mac_filters(mc_io, 0, mc_token, 1, 1); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear mac filters\n"); +- _dpaa2_eth_hw_add_mc_addr(net_dev, priv); +- _dpaa2_eth_hw_add_uc_addr(net_dev, priv); ++ if (err) ++ netdev_warn(net_dev, "Can't clear mac filters\n"); ++ add_mc_hw_addr(net_dev, priv); ++ add_uc_hw_addr(net_dev, priv); + + /* Now we can clear both ucast and mcast promisc, without risking + * to drop legitimate frames anymore. + */ + err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 0); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear ucast promisc\n"); ++ if (err) ++ netdev_warn(net_dev, "Can't clear ucast promisc\n"); + err = dpni_set_multicast_promisc(mc_io, 0, mc_token, 0); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't clear mcast promisc\n"); ++ if (err) ++ netdev_warn(net_dev, "Can't clear mcast promisc\n"); + + return; + + force_promisc: + err = dpni_set_unicast_promisc(mc_io, 0, mc_token, 1); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set ucast promisc\n"); ++ if (err) ++ netdev_warn(net_dev, "Can't set ucast promisc\n"); + force_mc_promisc: + err = dpni_set_multicast_promisc(mc_io, 0, mc_token, 1); +- DPAA2_ETH_WARN_IF_ERR(err, net_dev, "Can't set mcast promisc\n"); ++ if (err) ++ netdev_warn(net_dev, "Can't set mcast promisc\n"); + } + + static int dpaa2_eth_set_features(struct net_device *net_dev, +@@ -1379,20 +1418,19 @@ static int dpaa2_eth_set_features(struct + { + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + netdev_features_t changed = features ^ net_dev->features; ++ bool enable; + int err; + + if (changed & NETIF_F_RXCSUM) { +- bool enable = !!(features & NETIF_F_RXCSUM); +- +- err = dpaa2_eth_set_rx_csum(priv, enable); ++ enable = !!(features & NETIF_F_RXCSUM); ++ err = set_rx_csum(priv, enable); + if (err) + return err; + } + + if (changed & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)) { +- bool enable = !!(features & +- (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)); +- err = dpaa2_eth_set_tx_csum(priv, enable); ++ enable = !!(features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)); ++ err = set_tx_csum(priv, enable); + if (err) + return err; + } +@@ -1419,9 +1457,9 @@ static int dpaa2_eth_ts_ioctl(struct net + return -ERANGE; + } + +- if (config.rx_filter == HWTSTAMP_FILTER_NONE) ++ if (config.rx_filter == HWTSTAMP_FILTER_NONE) { + priv->ts_rx_en = false; +- else { ++ } else { + priv->ts_rx_en = true; + /* TS is set for all frame types, not only those requested */ + config.rx_filter = HWTSTAMP_FILTER_ALL; +@@ -1435,8 +1473,8 @@ static int dpaa2_eth_ioctl(struct net_de + { + if (cmd == SIOCSHWTSTAMP) + return dpaa2_eth_ts_ioctl(dev, rq, cmd); +- else +- return -EINVAL; ++ ++ return -EINVAL; + } + + static const struct net_device_ops dpaa2_eth_ops = { +@@ -1452,7 +1490,7 @@ static const struct net_device_ops dpaa2 + .ndo_do_ioctl = dpaa2_eth_ioctl, + }; + +-static void dpaa2_eth_cdan_cb(struct dpaa2_io_notification_ctx *ctx) ++static void cdan_cb(struct dpaa2_io_notification_ctx *ctx) + { + struct dpaa2_eth_channel *ch; + +@@ -1464,37 +1502,9 @@ static void dpaa2_eth_cdan_cb(struct dpa + napi_schedule_irqoff(&ch->napi); + } + +-static void dpaa2_eth_setup_fqs(struct dpaa2_eth_priv *priv) +-{ +- int i; +- +- /* We have one TxConf FQ per Tx flow */ +- for (i = 0; i < priv->dpni_attrs.max_senders; i++) { +- priv->fq[priv->num_fqs].netdev_priv = priv; +- priv->fq[priv->num_fqs].type = DPAA2_TX_CONF_FQ; +- priv->fq[priv->num_fqs].consume = dpaa2_eth_tx_conf; +- priv->fq[priv->num_fqs++].flowid = DPNI_NEW_FLOW_ID; +- } +- +- /* The number of Rx queues (Rx distribution width) may be different from +- * the number of cores. +- * We only support one traffic class for now. +- */ +- for (i = 0; i < dpaa2_queue_count(priv); i++) { +- priv->fq[priv->num_fqs].netdev_priv = priv; +- priv->fq[priv->num_fqs].type = DPAA2_RX_FQ; +- priv->fq[priv->num_fqs].consume = dpaa2_eth_rx; +- priv->fq[priv->num_fqs++].flowid = (u16)i; +- } +- +-#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE +- /* We have exactly one Rx error queue per DPNI */ +- priv->fq[priv->num_fqs].netdev_priv = priv; +- priv->fq[priv->num_fqs].type = DPAA2_RX_ERR_FQ; +- priv->fq[priv->num_fqs++].consume = dpaa2_eth_rx_err; +-#endif +-} +- ++/* Verify that the FLIB API version of various MC objects is supported ++ * by our driver ++ */ + static int check_obj_version(struct fsl_mc_device *ls_dev, u16 mc_version) + { + char *name = ls_dev->obj_desc.type; +@@ -1517,8 +1527,7 @@ static int check_obj_version(struct fsl_ + + /* Check that the FLIB-defined version matches the one reported by MC */ + if (mc_version != flib_version) { +- dev_err(dev, +- "%s FLIB version mismatch: MC reports %d, we have %d\n", ++ dev_err(dev, "%s FLIB version mismatch: MC reports %d, we have %d\n", + name, mc_version, flib_version); + return -EINVAL; + } +@@ -1534,7 +1543,8 @@ static int check_obj_version(struct fsl_ + return 0; + } + +-static struct fsl_mc_device *dpaa2_dpcon_setup(struct dpaa2_eth_priv *priv) ++/* Allocate and configure a DPCON object */ ++static struct fsl_mc_device *setup_dpcon(struct dpaa2_eth_priv *priv) + { + struct fsl_mc_device *dpcon; + struct device *dev = priv->net_dev->dev.parent; +@@ -1582,8 +1592,8 @@ err_open: + return NULL; + } + +-static void dpaa2_dpcon_free(struct dpaa2_eth_priv *priv, +- struct fsl_mc_device *dpcon) ++static void free_dpcon(struct dpaa2_eth_priv *priv, ++ struct fsl_mc_device *dpcon) + { + dpcon_disable(priv->mc_io, 0, dpcon->mc_handle); + dpcon_close(priv->mc_io, 0, dpcon->mc_handle); +@@ -1591,7 +1601,7 @@ static void dpaa2_dpcon_free(struct dpaa + } + + static struct dpaa2_eth_channel * +-dpaa2_alloc_channel(struct dpaa2_eth_priv *priv) ++alloc_channel(struct dpaa2_eth_priv *priv) + { + struct dpaa2_eth_channel *channel; + struct dpcon_attr attr; +@@ -1599,12 +1609,10 @@ dpaa2_alloc_channel(struct dpaa2_eth_pri + int err; + + channel = kzalloc(sizeof(*channel), GFP_ATOMIC); +- if (!channel) { +- dev_err(dev, "Memory allocation failed\n"); ++ if (!channel) + return NULL; +- } + +- channel->dpcon = dpaa2_dpcon_setup(priv); ++ channel->dpcon = setup_dpcon(priv); + if (!channel->dpcon) + goto err_setup; + +@@ -1622,20 +1630,23 @@ dpaa2_alloc_channel(struct dpaa2_eth_pri + return channel; + + err_get_attr: +- dpaa2_dpcon_free(priv, channel->dpcon); ++ free_dpcon(priv, channel->dpcon); + err_setup: + kfree(channel); + return NULL; + } + +-static void dpaa2_free_channel(struct dpaa2_eth_priv *priv, +- struct dpaa2_eth_channel *channel) ++static void free_channel(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_channel *channel) + { +- dpaa2_dpcon_free(priv, channel->dpcon); ++ free_dpcon(priv, channel->dpcon); + kfree(channel); + } + +-static int dpaa2_dpio_setup(struct dpaa2_eth_priv *priv) ++/* DPIO setup: allocate and configure QBMan channels, setup core affinity ++ * and register data availability notifications ++ */ ++static int setup_dpio(struct dpaa2_eth_priv *priv) + { + struct dpaa2_io_notification_ctx *nctx; + struct dpaa2_eth_channel *channel; +@@ -1652,7 +1663,7 @@ static int dpaa2_dpio_setup(struct dpaa2 + cpumask_clear(&priv->dpio_cpumask); + for_each_online_cpu(i) { + /* Try to allocate a channel */ +- channel = dpaa2_alloc_channel(priv); ++ channel = alloc_channel(priv); + if (!channel) + goto err_alloc_ch; + +@@ -1660,7 +1671,7 @@ static int dpaa2_dpio_setup(struct dpaa2 + + nctx = &channel->nctx; + nctx->is_cdan = 1; +- nctx->cb = dpaa2_eth_cdan_cb; ++ nctx->cb = cdan_cb; + nctx->id = channel->ch_id; + nctx->desired_cpu = i; + +@@ -1671,7 +1682,7 @@ static int dpaa2_dpio_setup(struct dpaa2 + /* This core doesn't have an affine DPIO, but there's + * a chance another one does, so keep trying + */ +- dpaa2_free_channel(priv, channel); ++ free_channel(priv, channel); + continue; + } + +@@ -1693,7 +1704,7 @@ static int dpaa2_dpio_setup(struct dpaa2 + cpumask_set_cpu(i, &priv->dpio_cpumask); + priv->num_channels++; + +- if (priv->num_channels == dpaa2_max_channels(priv)) ++ if (priv->num_channels == dpaa2_eth_max_channels(priv)) + break; + } + +@@ -1706,7 +1717,7 @@ static int dpaa2_dpio_setup(struct dpaa2 + + err_set_cdan: + dpaa2_io_service_deregister(NULL, nctx); +- dpaa2_free_channel(priv, channel); ++ free_channel(priv, channel); + err_alloc_ch: + if (cpumask_empty(&priv->dpio_cpumask)) { + dev_err(dev, "No cpu with an affine DPIO/DPCON\n"); +@@ -1717,7 +1728,7 @@ err_alloc_ch: + return 0; + } + +-static void dpaa2_dpio_free(struct dpaa2_eth_priv *priv) ++static void free_dpio(struct dpaa2_eth_priv *priv) + { + int i; + struct dpaa2_eth_channel *ch; +@@ -1726,12 +1737,12 @@ static void dpaa2_dpio_free(struct dpaa2 + for (i = 0; i < priv->num_channels; i++) { + ch = priv->channel[i]; + dpaa2_io_service_deregister(NULL, &ch->nctx); +- dpaa2_free_channel(priv, ch); ++ free_channel(priv, ch); + } + } + +-static struct dpaa2_eth_channel * +-dpaa2_get_channel_by_cpu(struct dpaa2_eth_priv *priv, int cpu) ++static struct dpaa2_eth_channel *get_affine_channel(struct dpaa2_eth_priv *priv, ++ int cpu) + { + struct device *dev = priv->net_dev->dev.parent; + int i; +@@ -1748,11 +1759,11 @@ dpaa2_get_channel_by_cpu(struct dpaa2_et + return priv->channel[0]; + } + +-static void dpaa2_set_fq_affinity(struct dpaa2_eth_priv *priv) ++static void set_fq_affinity(struct dpaa2_eth_priv *priv) + { + struct device *dev = priv->net_dev->dev.parent; + struct dpaa2_eth_fq *fq; +- int rx_cpu, txconf_cpu; ++ int rx_cpu, txc_cpu; + int i; + + /* For each FQ, pick one channel/CPU to deliver frames to. +@@ -1760,7 +1771,7 @@ static void dpaa2_set_fq_affinity(struct + * through direct user intervention. + */ + rx_cpu = cpumask_first(&priv->dpio_cpumask); +- txconf_cpu = cpumask_first(&priv->txconf_cpumask); ++ txc_cpu = cpumask_first(&priv->txconf_cpumask); + + for (i = 0; i < priv->num_fqs; i++) { + fq = &priv->fq[i]; +@@ -1768,20 +1779,56 @@ static void dpaa2_set_fq_affinity(struct + case DPAA2_RX_FQ: + case DPAA2_RX_ERR_FQ: + fq->target_cpu = rx_cpu; +- cpumask_rr(rx_cpu, &priv->dpio_cpumask); ++ rx_cpu = cpumask_next(rx_cpu, &priv->dpio_cpumask); ++ if (rx_cpu >= nr_cpu_ids) ++ rx_cpu = cpumask_first(&priv->dpio_cpumask); + break; + case DPAA2_TX_CONF_FQ: +- fq->target_cpu = txconf_cpu; +- cpumask_rr(txconf_cpu, &priv->txconf_cpumask); ++ fq->target_cpu = txc_cpu; ++ txc_cpu = cpumask_next(txc_cpu, &priv->txconf_cpumask); ++ if (txc_cpu >= nr_cpu_ids) ++ txc_cpu = cpumask_first(&priv->txconf_cpumask); + break; + default: + dev_err(dev, "Unknown FQ type: %d\n", fq->type); + } +- fq->channel = dpaa2_get_channel_by_cpu(priv, fq->target_cpu); ++ fq->channel = get_affine_channel(priv, fq->target_cpu); ++ } ++} ++ ++static void setup_fqs(struct dpaa2_eth_priv *priv) ++{ ++ int i; ++ ++ /* We have one TxConf FQ per Tx flow */ ++ for (i = 0; i < priv->dpni_attrs.max_senders; i++) { ++ priv->fq[priv->num_fqs].type = DPAA2_TX_CONF_FQ; ++ priv->fq[priv->num_fqs].consume = dpaa2_eth_tx_conf; ++ priv->fq[priv->num_fqs++].flowid = DPNI_NEW_FLOW_ID; ++ } ++ ++ /* The number of Rx queues (Rx distribution width) may be different from ++ * the number of cores. ++ * We only support one traffic class for now. ++ */ ++ for (i = 0; i < dpaa2_eth_queue_count(priv); i++) { ++ priv->fq[priv->num_fqs].type = DPAA2_RX_FQ; ++ priv->fq[priv->num_fqs].consume = dpaa2_eth_rx; ++ priv->fq[priv->num_fqs++].flowid = (u16)i; + } ++ ++#ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE ++ /* We have exactly one Rx error queue per DPNI */ ++ priv->fq[priv->num_fqs].type = DPAA2_RX_ERR_FQ; ++ priv->fq[priv->num_fqs++].consume = dpaa2_eth_rx_err; ++#endif ++ ++ /* For each FQ, decide on which core to process incoming frames */ ++ set_fq_affinity(priv); + } + +-static int dpaa2_dpbp_setup(struct dpaa2_eth_priv *priv) ++/* Allocate and configure one buffer pool for each interface */ ++static int setup_dpbp(struct dpaa2_eth_priv *priv) + { + int err; + struct fsl_mc_device *dpbp_dev; +@@ -1833,15 +1880,16 @@ err_open: + return err; + } + +-static void dpaa2_dpbp_free(struct dpaa2_eth_priv *priv) ++static void free_dpbp(struct dpaa2_eth_priv *priv) + { +- __dpaa2_dpbp_free(priv); ++ drain_pool(priv); + dpbp_disable(priv->mc_io, 0, priv->dpbp_dev->mc_handle); + dpbp_close(priv->mc_io, 0, priv->dpbp_dev->mc_handle); + fsl_mc_object_free(priv->dpbp_dev); + } + +-static int dpaa2_dpni_setup(struct fsl_mc_device *ls_dev) ++/* Configure the DPNI object this interface is associated with */ ++static int setup_dpni(struct fsl_mc_device *ls_dev) + { + struct device *dev = &ls_dev->dev; + struct dpaa2_eth_priv *priv; +@@ -1854,7 +1902,7 @@ static int dpaa2_dpni_setup(struct fsl_m + + priv->dpni_id = ls_dev->obj_desc.id; + +- /* and get a handle for the DPNI this interface is associate with */ ++ /* get a handle for the DPNI object */ + err = dpni_open(priv->mc_io, 0, priv->dpni_id, &priv->mc_token); + if (err) { + dev_err(dev, "dpni_open() failed\n"); +@@ -1864,7 +1912,10 @@ static int dpaa2_dpni_setup(struct fsl_m + ls_dev->mc_io = priv->mc_io; + ls_dev->mc_handle = priv->mc_token; + +- dma_mem = kzalloc(DPAA2_EXT_CFG_SIZE, GFP_DMA | GFP_KERNEL); ++ /* Map a memory region which will be used by MC to pass us an ++ * attribute structure ++ */ ++ dma_mem = kzalloc(DPAA2_EXT_CFG_SIZE, GFP_DMA | GFP_KERNEL); + if (!dma_mem) + goto err_alloc; + +@@ -1878,10 +1929,15 @@ static int dpaa2_dpni_setup(struct fsl_m + + err = dpni_get_attributes(priv->mc_io, 0, priv->mc_token, + &priv->dpni_attrs); ++ ++ /* We'll check the return code after unmapping, as we need to ++ * do this anyway ++ */ ++ dma_unmap_single(dev, priv->dpni_attrs.ext_cfg_iova, ++ DPAA2_EXT_CFG_SIZE, DMA_FROM_DEVICE); ++ + if (err) { + dev_err(dev, "dpni_get_attributes() failed (err=%d)\n", err); +- dma_unmap_single(dev, priv->dpni_attrs.ext_cfg_iova, +- DPAA2_EXT_CFG_SIZE, DMA_FROM_DEVICE); + goto err_get_attr; + } + +@@ -1889,9 +1945,6 @@ static int dpaa2_dpni_setup(struct fsl_m + if (err) + goto err_dpni_ver; + +- dma_unmap_single(dev, priv->dpni_attrs.ext_cfg_iova, +- DPAA2_EXT_CFG_SIZE, DMA_FROM_DEVICE); +- + memset(&priv->dpni_ext_cfg, 0, sizeof(priv->dpni_ext_cfg)); + err = dpni_extract_extended_cfg(&priv->dpni_ext_cfg, dma_mem); + if (err) { +@@ -1909,15 +1962,15 @@ static int dpaa2_dpni_setup(struct fsl_m + priv->buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE; + /* HW erratum mandates data alignment in multiples of 256 */ + priv->buf_layout.data_align = DPAA2_ETH_RX_BUF_ALIGN; +- /* ...rx, ... */ ++ ++ /* rx buffer */ + err = dpni_set_rx_buffer_layout(priv->mc_io, 0, priv->mc_token, + &priv->buf_layout); + if (err) { + dev_err(dev, "dpni_set_rx_buffer_layout() failed"); + goto err_buf_layout; + } +- /* ... tx, ... */ +- /* remove Rx-only options */ ++ /* tx buffer: remove Rx-only options */ + priv->buf_layout.options &= ~(DPNI_BUF_LAYOUT_OPT_DATA_ALIGN | + DPNI_BUF_LAYOUT_OPT_PARSER_RESULT); + err = dpni_set_tx_buffer_layout(priv->mc_io, 0, priv->mc_token, +@@ -1926,7 +1979,7 @@ static int dpaa2_dpni_setup(struct fsl_m + dev_err(dev, "dpni_set_tx_buffer_layout() failed"); + goto err_buf_layout; + } +- /* ... tx-confirm. */ ++ /* tx-confirm: same options as tx */ + priv->buf_layout.options &= ~DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE; + priv->buf_layout.options |= DPNI_BUF_LAYOUT_OPT_TIMESTAMP; + priv->buf_layout.pass_timestamp = 1; +@@ -1946,8 +1999,9 @@ static int dpaa2_dpni_setup(struct fsl_m + goto err_data_offset; + } + +- /* Warn in case TX data offset is not multiple of 64 bytes. */ +- WARN_ON(priv->tx_data_offset % 64); ++ if ((priv->tx_data_offset % 64) != 0) ++ dev_warn(dev, "Tx data offset (%d) not a multiple of 64B", ++ priv->tx_data_offset); + + /* Accommodate SWA space. */ + priv->tx_data_offset += DPAA2_ETH_SWA_SIZE; +@@ -1976,7 +2030,7 @@ err_open: + return err; + } + +-static void dpaa2_dpni_free(struct dpaa2_eth_priv *priv) ++static void free_dpni(struct dpaa2_eth_priv *priv) + { + int err; + +@@ -1988,8 +2042,8 @@ static void dpaa2_dpni_free(struct dpaa2 + dpni_close(priv->mc_io, 0, priv->mc_token); + } + +-static int dpaa2_rx_flow_setup(struct dpaa2_eth_priv *priv, +- struct dpaa2_eth_fq *fq) ++static int setup_rx_flow(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_fq *fq) + { + struct device *dev = priv->net_dev->dev.parent; + struct dpni_queue_attr rx_queue_attr; +@@ -2023,8 +2077,8 @@ static int dpaa2_rx_flow_setup(struct dp + return 0; + } + +-static int dpaa2_tx_flow_setup(struct dpaa2_eth_priv *priv, +- struct dpaa2_eth_fq *fq) ++static int setup_tx_flow(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_fq *fq) + { + struct device *dev = priv->net_dev->dev.parent; + struct dpni_tx_flow_cfg tx_flow_cfg; +@@ -2070,15 +2124,16 @@ static int dpaa2_tx_flow_setup(struct dp + } + + #ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE +-static int dpaa2_rx_err_setup(struct dpaa2_eth_priv *priv, +- struct dpaa2_eth_fq *fq) ++static int setup_rx_err_flow(struct dpaa2_eth_priv *priv, ++ struct dpaa2_eth_fq *fq) + { + struct dpni_queue_attr queue_attr; + struct dpni_queue_cfg queue_cfg; + int err; + + /* Configure the Rx error queue to generate CDANs, +- * just like the Rx queues */ ++ * just like the Rx queues ++ */ + queue_cfg.options = DPNI_QUEUE_OPT_USER_CTX | DPNI_QUEUE_OPT_DEST; + queue_cfg.dest_cfg.dest_type = DPNI_DEST_DPCON; + queue_cfg.dest_cfg.priority = 1; +@@ -2091,7 +2146,8 @@ static int dpaa2_rx_err_setup(struct dpa + } + + /* Get the FQID */ +- err = dpni_get_rx_err_queue(priv->mc_io, 0, priv->mc_token, &queue_attr); ++ err = dpni_get_rx_err_queue(priv->mc_io, 0, priv->mc_token, ++ &queue_attr); + if (err) { + netdev_err(priv->net_dev, "dpni_get_rx_err_queue() failed\n"); + return err; +@@ -2102,7 +2158,10 @@ static int dpaa2_rx_err_setup(struct dpa + } + #endif + +-static int dpaa2_dpni_bind(struct dpaa2_eth_priv *priv) ++/* Bind the DPNI to its needed objects and resources: buffer pool, DPIOs, ++ * frame queues and channels ++ */ ++static int bind_dpni(struct dpaa2_eth_priv *priv) + { + struct net_device *net_dev = priv->net_dev; + struct device *dev = net_dev->dev.parent; +@@ -2114,20 +2173,20 @@ static int dpaa2_dpni_bind(struct dpaa2_ + pools_params.num_dpbp = 1; + pools_params.pools[0].dpbp_id = priv->dpbp_dev->obj_desc.id; + pools_params.pools[0].backup_pool = 0; +- pools_params.pools[0].buffer_size = DPAA2_ETH_RX_BUFFER_SIZE; ++ pools_params.pools[0].buffer_size = DPAA2_ETH_RX_BUF_SIZE; + err = dpni_set_pools(priv->mc_io, 0, priv->mc_token, &pools_params); + if (err) { + dev_err(dev, "dpni_set_pools() failed\n"); + return err; + } + +- dpaa2_cls_check(net_dev); ++ check_fs_support(net_dev); + + /* have the interface implicitly distribute traffic based on supported + * header fields + */ + if (dpaa2_eth_hash_enabled(priv)) { +- err = dpaa2_set_hash(net_dev, DPAA2_RXH_SUPPORTED); ++ err = dpaa2_eth_set_hash(net_dev, DPAA2_RXH_SUPPORTED); + if (err) + return err; + } +@@ -2151,14 +2210,14 @@ static int dpaa2_dpni_bind(struct dpaa2_ + for (i = 0; i < priv->num_fqs; i++) { + switch (priv->fq[i].type) { + case DPAA2_RX_FQ: +- err = dpaa2_rx_flow_setup(priv, &priv->fq[i]); ++ err = setup_rx_flow(priv, &priv->fq[i]); + break; + case DPAA2_TX_CONF_FQ: +- err = dpaa2_tx_flow_setup(priv, &priv->fq[i]); ++ err = setup_tx_flow(priv, &priv->fq[i]); + break; + #ifdef CONFIG_FSL_DPAA2_ETH_USE_ERR_QUEUE + case DPAA2_RX_ERR_FQ: +- err = dpaa2_rx_err_setup(priv, &priv->fq[i]); ++ err = setup_rx_err_flow(priv, &priv->fq[i]); + break; + #endif + default: +@@ -2178,7 +2237,8 @@ static int dpaa2_dpni_bind(struct dpaa2_ + return 0; + } + +-static int dpaa2_eth_alloc_rings(struct dpaa2_eth_priv *priv) ++/* Allocate rings for storing incoming frame descriptors */ ++static int alloc_rings(struct dpaa2_eth_priv *priv) + { + struct net_device *net_dev = priv->net_dev; + struct device *dev = net_dev->dev.parent; +@@ -2205,7 +2265,7 @@ err_ring: + return -ENOMEM; + } + +-static void dpaa2_eth_free_rings(struct dpaa2_eth_priv *priv) ++static void free_rings(struct dpaa2_eth_priv *priv) + { + int i; + +@@ -2213,7 +2273,7 @@ static void dpaa2_eth_free_rings(struct + dpaa2_io_store_destroy(priv->channel[i]->store); + } + +-static int dpaa2_eth_netdev_init(struct net_device *net_dev) ++static int netdev_init(struct net_device *net_dev) + { + int err; + struct device *dev = net_dev->dev.parent; +@@ -2223,7 +2283,9 @@ static int dpaa2_eth_netdev_init(struct + + net_dev->netdev_ops = &dpaa2_eth_ops; + +- /* If the DPL contains all-0 mac_addr, set a random hardware address */ ++ /* If the DPNI attributes contain an all-0 mac_addr, ++ * set a random hardware address ++ */ + err = dpni_get_primary_mac_addr(priv->mc_io, 0, priv->mc_token, + mac_addr); + if (err) { +@@ -2281,14 +2343,13 @@ static int dpaa2_eth_netdev_init(struct + return 0; + } + +-#ifdef CONFIG_FSL_DPAA2_ETH_LINK_POLL +-static int dpaa2_poll_link_state(void *arg) ++static int poll_link_state(void *arg) + { + struct dpaa2_eth_priv *priv = (struct dpaa2_eth_priv *)arg; + int err; + + while (!kthread_should_stop()) { +- err = dpaa2_link_state_update(priv); ++ err = link_state_update(priv); + if (unlikely(err)) + return err; + +@@ -2297,7 +2358,7 @@ static int dpaa2_poll_link_state(void *a + + return 0; + } +-#else ++ + static irqreturn_t dpni_irq0_handler(int irq_num, void *arg) + { + return IRQ_WAKE_THREAD; +@@ -2312,7 +2373,6 @@ static irqreturn_t dpni_irq0_handler_thr + struct net_device *net_dev = dev_get_drvdata(dev); + int err; + +- netdev_dbg(net_dev, "IRQ %d received\n", irq_num); + err = dpni_get_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle, + irq_index, &status); + if (unlikely(err)) { +@@ -2323,7 +2383,7 @@ static irqreturn_t dpni_irq0_handler_thr + + if (status & DPNI_IRQ_EVENT_LINK_CHANGED) { + clear |= DPNI_IRQ_EVENT_LINK_CHANGED; +- dpaa2_link_state_update(netdev_priv(net_dev)); ++ link_state_update(netdev_priv(net_dev)); + } + + out: +@@ -2332,17 +2392,18 @@ out: + return IRQ_HANDLED; + } + +-static int dpaa2_eth_setup_irqs(struct fsl_mc_device *ls_dev) ++static int setup_irqs(struct fsl_mc_device *ls_dev) + { + int err = 0; + struct fsl_mc_device_irq *irq; +- int irq_count = ls_dev->obj_desc.irq_count; + u8 irq_index = DPNI_IRQ_INDEX; + u32 mask = DPNI_IRQ_EVENT_LINK_CHANGED; + +- /* The only interrupt supported now is the link state notification. */ +- if (WARN_ON(irq_count != 1)) +- return -EINVAL; ++ err = fsl_mc_allocate_irqs(ls_dev); ++ if (err) { ++ dev_err(&ls_dev->dev, "MC irqs allocation failed\n"); ++ return err; ++ } + + irq = ls_dev->irqs[0]; + err = devm_request_threaded_irq(&ls_dev->dev, irq->msi_desc->irq, +@@ -2352,28 +2413,34 @@ static int dpaa2_eth_setup_irqs(struct f + dev_name(&ls_dev->dev), &ls_dev->dev); + if (err < 0) { + dev_err(&ls_dev->dev, "devm_request_threaded_irq(): %d", err); +- return err; ++ goto free_mc_irq; + } + + err = dpni_set_irq_mask(ls_dev->mc_io, 0, ls_dev->mc_handle, + irq_index, mask); + if (err < 0) { + dev_err(&ls_dev->dev, "dpni_set_irq_mask(): %d", err); +- return err; ++ goto free_irq; + } + + err = dpni_set_irq_enable(ls_dev->mc_io, 0, ls_dev->mc_handle, + irq_index, 1); + if (err < 0) { + dev_err(&ls_dev->dev, "dpni_set_irq_enable(): %d", err); +- return err; ++ goto free_irq; + } + + return 0; ++ ++free_irq: ++ devm_free_irq(&ls_dev->dev, irq->msi_desc->irq, &ls_dev->dev); ++free_mc_irq: ++ fsl_mc_free_irqs(ls_dev); ++ ++ return err; + } +-#endif + +-static void dpaa2_eth_napi_add(struct dpaa2_eth_priv *priv) ++static void add_ch_napi(struct dpaa2_eth_priv *priv) + { + int i; + struct dpaa2_eth_channel *ch; +@@ -2386,7 +2453,7 @@ static void dpaa2_eth_napi_add(struct dp + } + } + +-static void dpaa2_eth_napi_del(struct dpaa2_eth_priv *priv) ++static void del_ch_napi(struct dpaa2_eth_priv *priv) + { + int i; + struct dpaa2_eth_channel *ch; +@@ -2398,7 +2465,6 @@ static void dpaa2_eth_napi_del(struct dp + } + + /* SysFS support */ +- + static ssize_t dpaa2_eth_show_tx_shaping(struct device *dev, + struct device_attribute *attr, + char *buf) +@@ -2482,22 +2548,21 @@ static ssize_t dpaa2_eth_write_txconf_cp + } + + /* Set the new TxConf FQ affinities */ +- dpaa2_set_fq_affinity(priv); ++ set_fq_affinity(priv); + +-#ifdef CONFIG_FSL_DPAA2_ETH_LINK_POLL + /* dpaa2_eth_open() below will *stop* the Tx queues until an explicit + * link up notification is received. Give the polling thread enough time + * to detect the link state change, or else we'll end up with the + * transmission side forever shut down. + */ +- msleep(2 * DPAA2_ETH_LINK_STATE_REFRESH); +-#endif ++ if (priv->do_link_poll) ++ msleep(2 * DPAA2_ETH_LINK_STATE_REFRESH); + + for (i = 0; i < priv->num_fqs; i++) { + fq = &priv->fq[i]; + if (fq->type != DPAA2_TX_CONF_FQ) + continue; +- dpaa2_tx_flow_setup(priv, fq); ++ setup_tx_flow(priv, fq); + } + + if (running) { +@@ -2568,7 +2633,6 @@ static int dpaa2_eth_probe(struct fsl_mc + + priv = netdev_priv(net_dev); + priv->net_dev = net_dev; +- priv->msg_enable = netif_msg_init(debug, -1); + + /* Obtain a MC portal */ + err = fsl_mc_portal_allocate(dpni_dev, FSL_MC_IO_ATOMIC_CONTEXT_PORTAL, +@@ -2578,39 +2642,27 @@ static int dpaa2_eth_probe(struct fsl_mc + goto err_portal_alloc; + } + +-#ifndef CONFIG_FSL_DPAA2_ETH_LINK_POLL +- err = fsl_mc_allocate_irqs(dpni_dev); +- if (err) { +- dev_err(dev, "MC irqs allocation failed\n"); +- goto err_irqs_alloc; +- } +-#endif +- +- /* DPNI initialization */ +- err = dpaa2_dpni_setup(dpni_dev); +- if (err < 0) ++ /* MC objects initialization and configuration */ ++ err = setup_dpni(dpni_dev); ++ if (err) + goto err_dpni_setup; + +- /* DPIO */ +- err = dpaa2_dpio_setup(priv); ++ err = setup_dpio(priv); + if (err) + goto err_dpio_setup; + +- /* FQs */ +- dpaa2_eth_setup_fqs(priv); +- dpaa2_set_fq_affinity(priv); ++ setup_fqs(priv); + +- /* DPBP */ +- err = dpaa2_dpbp_setup(priv); ++ err = setup_dpbp(priv); + if (err) + goto err_dpbp_setup; + +- /* DPNI binding to DPIO and DPBPs */ +- err = dpaa2_dpni_bind(priv); ++ err = bind_dpni(priv); + if (err) + goto err_bind; + +- dpaa2_eth_napi_add(priv); ++ /* Add a NAPI context for each channel */ ++ add_ch_napi(priv); + + /* Percpu statistics */ + priv->percpu_stats = alloc_percpu(*priv->percpu_stats); +@@ -2635,38 +2687,37 @@ static int dpaa2_eth_probe(struct fsl_mc + dev_warn(&net_dev->dev, "using name \"%s\"\n", net_dev->name); + } + +- err = dpaa2_eth_netdev_init(net_dev); ++ err = netdev_init(net_dev); + if (err) + goto err_netdev_init; + + /* Configure checksum offload based on current interface flags */ +- err = dpaa2_eth_set_rx_csum(priv, +- !!(net_dev->features & NETIF_F_RXCSUM)); ++ err = set_rx_csum(priv, !!(net_dev->features & NETIF_F_RXCSUM)); + if (err) + goto err_csum; + +- err = dpaa2_eth_set_tx_csum(priv, +- !!(net_dev->features & +- (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM))); ++ err = set_tx_csum(priv, !!(net_dev->features & ++ (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM))); + if (err) + goto err_csum; + +- err = dpaa2_eth_alloc_rings(priv); ++ err = alloc_rings(priv); + if (err) + goto err_alloc_rings; + + net_dev->ethtool_ops = &dpaa2_ethtool_ops; + +-#ifdef CONFIG_FSL_DPAA2_ETH_LINK_POLL +- priv->poll_thread = kthread_run(dpaa2_poll_link_state, priv, +- "%s_poll_link", net_dev->name); +-#else +- err = dpaa2_eth_setup_irqs(dpni_dev); ++ err = setup_irqs(dpni_dev); + if (err) { +- netdev_err(net_dev, "ERROR %d setting up interrupts", err); +- goto err_setup_irqs; ++ netdev_warn(net_dev, "Failed to set link interrupt, fall back to polling\n"); ++ priv->poll_thread = kthread_run(poll_link_state, priv, ++ "%s_poll_link", net_dev->name); ++ if (IS_ERR(priv->poll_thread)) { ++ netdev_err(net_dev, "Error starting polling thread\n"); ++ goto err_poll_thread; ++ } ++ priv->do_link_poll = true; + } +-#endif + + dpaa2_eth_sysfs_init(&net_dev->dev); + dpaa2_dbg_add(priv); +@@ -2674,10 +2725,8 @@ static int dpaa2_eth_probe(struct fsl_mc + dev_info(dev, "Probed interface %s\n", net_dev->name); + return 0; + +-#ifndef CONFIG_FSL_DPAA2_ETH_LINK_POLL +-err_setup_irqs: +-#endif +- dpaa2_eth_free_rings(priv); ++err_poll_thread: ++ free_rings(priv); + err_alloc_rings: + err_csum: + unregister_netdev(net_dev); +@@ -2686,19 +2735,15 @@ err_netdev_init: + err_alloc_percpu_extras: + free_percpu(priv->percpu_stats); + err_alloc_percpu_stats: +- dpaa2_eth_napi_del(priv); ++ del_ch_napi(priv); + err_bind: +- dpaa2_dpbp_free(priv); ++ free_dpbp(priv); + err_dpbp_setup: +- dpaa2_dpio_free(priv); ++ free_dpio(priv); + err_dpio_setup: + kfree(priv->cls_rule); + dpni_close(priv->mc_io, 0, priv->mc_token); + err_dpni_setup: +-#ifndef CONFIG_FSL_DPAA2_ETH_LINK_POLL +- fsl_mc_free_irqs(dpni_dev); +-err_irqs_alloc: +-#endif + fsl_mc_portal_free(priv->mc_io); + err_portal_alloc: + dev_set_drvdata(dev, NULL); +@@ -2723,22 +2768,21 @@ static int dpaa2_eth_remove(struct fsl_m + unregister_netdev(net_dev); + dev_info(net_dev->dev.parent, "Removed interface %s\n", net_dev->name); + +- dpaa2_dpio_free(priv); +- dpaa2_eth_free_rings(priv); +- dpaa2_eth_napi_del(priv); +- dpaa2_dpbp_free(priv); +- dpaa2_dpni_free(priv); ++ free_dpio(priv); ++ free_rings(priv); ++ del_ch_napi(priv); ++ free_dpbp(priv); ++ free_dpni(priv); + + fsl_mc_portal_free(priv->mc_io); + + free_percpu(priv->percpu_stats); + free_percpu(priv->percpu_extras); + +-#ifdef CONFIG_FSL_DPAA2_ETH_LINK_POLL +- kthread_stop(priv->poll_thread); +-#else +- fsl_mc_free_irqs(ls_dev); +-#endif ++ if (priv->do_link_poll) ++ kthread_stop(priv->poll_thread); ++ else ++ fsl_mc_free_irqs(ls_dev); + + kfree(priv->cls_rule); + +--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h +@@ -49,8 +49,10 @@ + + #define DPAA2_ETH_STORE_SIZE 16 + +-/* Maximum receive frame size is 64K */ +-#define DPAA2_ETH_MAX_SG_ENTRIES ((64 * 1024) / DPAA2_ETH_RX_BUFFER_SIZE) ++/* Maximum number of scatter-gather entries in an ingress frame, ++ * considering the maximum receive frame size is 64K ++ */ ++#define DPAA2_ETH_MAX_SG_ENTRIES ((64 * 1024) / DPAA2_ETH_RX_BUF_SIZE) + + /* Maximum acceptable MTU value. It is in direct relation with the MC-enforced + * Max Frame Length (currently 10k). +@@ -75,17 +77,26 @@ + #define DPAA2_ETH_NUM_BUFS (DPAA2_ETH_MAX_FRAMES_PER_QUEUE + 256) + #define DPAA2_ETH_REFILL_THRESH DPAA2_ETH_MAX_FRAMES_PER_QUEUE + ++/* Maximum number of buffers that can be acquired/released through a single ++ * QBMan command ++ */ ++#define DPAA2_ETH_BUFS_PER_CMD 7 ++ + /* Hardware requires alignment for ingress/egress buffer addresses + * and ingress buffer lengths. + */ +-#define DPAA2_ETH_RX_BUFFER_SIZE 2048 ++#define DPAA2_ETH_RX_BUF_SIZE 2048 + #define DPAA2_ETH_TX_BUF_ALIGN 64 + #define DPAA2_ETH_RX_BUF_ALIGN 256 + #define DPAA2_ETH_NEEDED_HEADROOM(p_priv) \ + ((p_priv)->tx_data_offset + DPAA2_ETH_TX_BUF_ALIGN) + ++/* Hardware only sees DPAA2_ETH_RX_BUF_SIZE, but we need to allocate ingress ++ * buffers large enough to allow building an skb around them and also account ++ * for alignment restrictions ++ */ + #define DPAA2_ETH_BUF_RAW_SIZE \ +- (DPAA2_ETH_RX_BUFFER_SIZE + \ ++ (DPAA2_ETH_RX_BUF_SIZE + \ + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) + \ + DPAA2_ETH_RX_BUF_ALIGN) + +@@ -127,57 +138,56 @@ struct dpaa2_fas { + __le32 status; + } __packed; + ++/* Error and status bits in the frame annotation status word */ + /* Debug frame, otherwise supposed to be discarded */ +-#define DPAA2_ETH_FAS_DISC 0x80000000 ++#define DPAA2_FAS_DISC 0x80000000 + /* MACSEC frame */ +-#define DPAA2_ETH_FAS_MS 0x40000000 +-#define DPAA2_ETH_FAS_PTP 0x08000000 ++#define DPAA2_FAS_MS 0x40000000 ++#define DPAA2_FAS_PTP 0x08000000 + /* Ethernet multicast frame */ +-#define DPAA2_ETH_FAS_MC 0x04000000 ++#define DPAA2_FAS_MC 0x04000000 + /* Ethernet broadcast frame */ +-#define DPAA2_ETH_FAS_BC 0x02000000 +-#define DPAA2_ETH_FAS_KSE 0x00040000 +-#define DPAA2_ETH_FAS_EOFHE 0x00020000 +-#define DPAA2_ETH_FAS_MNLE 0x00010000 +-#define DPAA2_ETH_FAS_TIDE 0x00008000 +-#define DPAA2_ETH_FAS_PIEE 0x00004000 ++#define DPAA2_FAS_BC 0x02000000 ++#define DPAA2_FAS_KSE 0x00040000 ++#define DPAA2_FAS_EOFHE 0x00020000 ++#define DPAA2_FAS_MNLE 0x00010000 ++#define DPAA2_FAS_TIDE 0x00008000 ++#define DPAA2_FAS_PIEE 0x00004000 + /* Frame length error */ +-#define DPAA2_ETH_FAS_FLE 0x00002000 +-/* Frame physical error; our favourite pastime */ +-#define DPAA2_ETH_FAS_FPE 0x00001000 +-#define DPAA2_ETH_FAS_PTE 0x00000080 +-#define DPAA2_ETH_FAS_ISP 0x00000040 +-#define DPAA2_ETH_FAS_PHE 0x00000020 +-#define DPAA2_ETH_FAS_BLE 0x00000010 ++#define DPAA2_FAS_FLE 0x00002000 ++/* Frame physical error */ ++#define DPAA2_FAS_FPE 0x00001000 ++#define DPAA2_FAS_PTE 0x00000080 ++#define DPAA2_FAS_ISP 0x00000040 ++#define DPAA2_FAS_PHE 0x00000020 ++#define DPAA2_FAS_BLE 0x00000010 + /* L3 csum validation performed */ +-#define DPAA2_ETH_FAS_L3CV 0x00000008 ++#define DPAA2_FAS_L3CV 0x00000008 + /* L3 csum error */ +-#define DPAA2_ETH_FAS_L3CE 0x00000004 ++#define DPAA2_FAS_L3CE 0x00000004 + /* L4 csum validation performed */ +-#define DPAA2_ETH_FAS_L4CV 0x00000002 ++#define DPAA2_FAS_L4CV 0x00000002 + /* L4 csum error */ +-#define DPAA2_ETH_FAS_L4CE 0x00000001 +-/* These bits always signal errors */ +-#define DPAA2_ETH_RX_ERR_MASK (DPAA2_ETH_FAS_KSE | \ +- DPAA2_ETH_FAS_EOFHE | \ +- DPAA2_ETH_FAS_MNLE | \ +- DPAA2_ETH_FAS_TIDE | \ +- DPAA2_ETH_FAS_PIEE | \ +- DPAA2_ETH_FAS_FLE | \ +- DPAA2_ETH_FAS_FPE | \ +- DPAA2_ETH_FAS_PTE | \ +- DPAA2_ETH_FAS_ISP | \ +- DPAA2_ETH_FAS_PHE | \ +- DPAA2_ETH_FAS_BLE | \ +- DPAA2_ETH_FAS_L3CE | \ +- DPAA2_ETH_FAS_L4CE) +-/* Unsupported features in the ingress */ +-#define DPAA2_ETH_RX_UNSUPP_MASK DPAA2_ETH_FAS_MS ++#define DPAA2_FAS_L4CE 0x00000001 ++/* Possible errors on the ingress path */ ++#define DPAA2_ETH_RX_ERR_MASK (DPAA2_FAS_KSE | \ ++ DPAA2_FAS_EOFHE | \ ++ DPAA2_FAS_MNLE | \ ++ DPAA2_FAS_TIDE | \ ++ DPAA2_FAS_PIEE | \ ++ DPAA2_FAS_FLE | \ ++ DPAA2_FAS_FPE | \ ++ DPAA2_FAS_PTE | \ ++ DPAA2_FAS_ISP | \ ++ DPAA2_FAS_PHE | \ ++ DPAA2_FAS_BLE | \ ++ DPAA2_FAS_L3CE | \ ++ DPAA2_FAS_L4CE) + /* Tx errors */ +-#define DPAA2_ETH_TXCONF_ERR_MASK (DPAA2_ETH_FAS_KSE | \ +- DPAA2_ETH_FAS_EOFHE | \ +- DPAA2_ETH_FAS_MNLE | \ +- DPAA2_ETH_FAS_TIDE) ++#define DPAA2_ETH_TXCONF_ERR_MASK (DPAA2_FAS_KSE | \ ++ DPAA2_FAS_EOFHE | \ ++ DPAA2_FAS_MNLE | \ ++ DPAA2_FAS_TIDE) + + /* Time in milliseconds between link state updates */ + #define DPAA2_ETH_LINK_STATE_REFRESH 1000 +@@ -185,7 +195,7 @@ struct dpaa2_fas { + /* Driver statistics, other than those in struct rtnl_link_stats64. + * These are usually collected per-CPU and aggregated by ethtool. + */ +-struct dpaa2_eth_stats { ++struct dpaa2_eth_drv_stats { + __u64 tx_conf_frames; + __u64 tx_conf_bytes; + __u64 tx_sg_frames; +@@ -210,15 +220,17 @@ struct dpaa2_eth_ch_stats { + __u64 cdan; + /* Number of frames received on queues from this channel */ + __u64 frames; ++ /* Pull errors */ ++ __u64 pull_err; + }; + +-/* Maximum number of Rx queues associated with a DPNI */ ++/* Maximum number of queues associated with a DPNI */ + #define DPAA2_ETH_MAX_RX_QUEUES 16 + #define DPAA2_ETH_MAX_TX_QUEUES NR_CPUS + #define DPAA2_ETH_MAX_RX_ERR_QUEUES 1 +-#define DPAA2_ETH_MAX_QUEUES (DPAA2_ETH_MAX_RX_QUEUES + \ +- DPAA2_ETH_MAX_TX_QUEUES + \ +- DPAA2_ETH_MAX_RX_ERR_QUEUES) ++#define DPAA2_ETH_MAX_QUEUES (DPAA2_ETH_MAX_RX_QUEUES + \ ++ DPAA2_ETH_MAX_TX_QUEUES + \ ++ DPAA2_ETH_MAX_RX_ERR_QUEUES) + + #define DPAA2_ETH_MAX_DPCONS NR_CPUS + +@@ -241,7 +253,6 @@ struct dpaa2_eth_fq { + struct dpaa2_eth_channel *, + const struct dpaa2_fd *, + struct napi_struct *); +- struct dpaa2_eth_priv *netdev_priv; /* backpointer */ + struct dpaa2_eth_fq_stats stats; + }; + +@@ -258,16 +269,16 @@ struct dpaa2_eth_channel { + struct dpaa2_eth_ch_stats stats; + }; + +-struct dpaa2_cls_rule { ++struct dpaa2_eth_cls_rule { + struct ethtool_rx_flow_spec fs; + bool in_use; + }; + ++/* Driver private data */ + struct dpaa2_eth_priv { + struct net_device *net_dev; + + u8 num_fqs; +- /* First queue is tx conf, the rest are rx */ + struct dpaa2_eth_fq fq[DPAA2_ETH_MAX_QUEUES]; + + u8 num_channels; +@@ -299,12 +310,12 @@ struct dpaa2_eth_priv { + /* Standard statistics */ + struct rtnl_link_stats64 __percpu *percpu_stats; + /* Extra stats, in addition to the ones known by the kernel */ +- struct dpaa2_eth_stats __percpu *percpu_extras; +- u32 msg_enable; /* net_device message level */ ++ struct dpaa2_eth_drv_stats __percpu *percpu_extras; + + u16 mc_token; + + struct dpni_link_state link_state; ++ bool do_link_poll; + struct task_struct *poll_thread; + + /* enabled ethtool hashing bits */ +@@ -315,7 +326,7 @@ struct dpaa2_eth_priv { + #endif + + /* array of classification rules */ +- struct dpaa2_cls_rule *cls_rule; ++ struct dpaa2_eth_cls_rule *cls_rule; + + struct dpni_tx_shaping_cfg shaping_cfg; + +@@ -341,9 +352,9 @@ struct dpaa2_eth_priv { + + extern const struct ethtool_ops dpaa2_ethtool_ops; + +-int dpaa2_set_hash(struct net_device *net_dev, u64 flags); ++int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags); + +-static int dpaa2_queue_count(struct dpaa2_eth_priv *priv) ++static int dpaa2_eth_queue_count(struct dpaa2_eth_priv *priv) + { + if (!dpaa2_eth_hash_enabled(priv)) + return 1; +@@ -351,16 +362,16 @@ static int dpaa2_queue_count(struct dpaa + return priv->dpni_ext_cfg.tc_cfg[0].max_dist; + } + +-static inline int dpaa2_max_channels(struct dpaa2_eth_priv *priv) ++static inline int dpaa2_eth_max_channels(struct dpaa2_eth_priv *priv) + { + /* Ideally, we want a number of channels large enough + * to accommodate both the Rx distribution size + * and the max number of Tx confirmation queues + */ +- return max_t(int, dpaa2_queue_count(priv), ++ return max_t(int, dpaa2_eth_queue_count(priv), + priv->dpni_attrs.max_senders); + } + +-void dpaa2_cls_check(struct net_device *); ++void check_fs_support(struct net_device *); + + #endif /* __DPAA2_H */ +--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c +@@ -52,7 +52,7 @@ char dpaa2_ethtool_stats[][ETH_GSTRING_L + + #define DPAA2_ETH_NUM_STATS ARRAY_SIZE(dpaa2_ethtool_stats) + +-/* To be kept in sync with 'struct dpaa2_eth_stats' */ ++/* To be kept in sync with 'struct dpaa2_eth_drv_stats' */ + char dpaa2_ethtool_extras[][ETH_GSTRING_LEN] = { + /* per-cpu stats */ + +@@ -63,12 +63,12 @@ char dpaa2_ethtool_extras[][ETH_GSTRING_ + "rx sg frames", + "rx sg bytes", + /* how many times we had to retry the enqueue command */ +- "tx portal busy", ++ "enqueue portal busy", + + /* Channel stats */ +- + /* How many times we had to retry the volatile dequeue command */ +- "portal busy", ++ "dequeue portal busy", ++ "channel pull errors", + /* Number of notifications received */ + "cdan", + #ifdef CONFIG_FSL_QBMAN_DEBUG +@@ -83,8 +83,8 @@ char dpaa2_ethtool_extras[][ETH_GSTRING_ + + #define DPAA2_ETH_NUM_EXTRA_STATS ARRAY_SIZE(dpaa2_ethtool_extras) + +-static void dpaa2_get_drvinfo(struct net_device *net_dev, +- struct ethtool_drvinfo *drvinfo) ++static void dpaa2_eth_get_drvinfo(struct net_device *net_dev, ++ struct ethtool_drvinfo *drvinfo) + { + struct mc_version mc_ver; + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); +@@ -112,20 +112,8 @@ static void dpaa2_get_drvinfo(struct net + sizeof(drvinfo->bus_info)); + } + +-static u32 dpaa2_get_msglevel(struct net_device *net_dev) +-{ +- return ((struct dpaa2_eth_priv *)netdev_priv(net_dev))->msg_enable; +-} +- +-static void dpaa2_set_msglevel(struct net_device *net_dev, +- u32 msg_enable) +-{ +- ((struct dpaa2_eth_priv *)netdev_priv(net_dev))->msg_enable = +- msg_enable; +-} +- +-static int dpaa2_get_settings(struct net_device *net_dev, +- struct ethtool_cmd *cmd) ++static int dpaa2_eth_get_settings(struct net_device *net_dev, ++ struct ethtool_cmd *cmd) + { + struct dpni_link_state state = {0}; + int err = 0; +@@ -152,8 +140,8 @@ out: + return err; + } + +-static int dpaa2_set_settings(struct net_device *net_dev, +- struct ethtool_cmd *cmd) ++static int dpaa2_eth_set_settings(struct net_device *net_dev, ++ struct ethtool_cmd *cmd) + { + struct dpni_link_cfg cfg = {0}; + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); +@@ -190,8 +178,8 @@ static int dpaa2_set_settings(struct net + return err; + } + +-static void dpaa2_get_strings(struct net_device *netdev, u32 stringset, +- u8 *data) ++static void dpaa2_eth_get_strings(struct net_device *netdev, u32 stringset, ++ u8 *data) + { + u8 *p = data; + int i; +@@ -210,7 +198,7 @@ static void dpaa2_get_strings(struct net + } + } + +-static int dpaa2_get_sset_count(struct net_device *net_dev, int sset) ++static int dpaa2_eth_get_sset_count(struct net_device *net_dev, int sset) + { + switch (sset) { + case ETH_SS_STATS: /* ethtool_get_stats(), ethtool_get_drvinfo() */ +@@ -222,9 +210,9 @@ static int dpaa2_get_sset_count(struct n + + /** Fill in hardware counters, as returned by the MC firmware. + */ +-static void dpaa2_get_ethtool_stats(struct net_device *net_dev, +- struct ethtool_stats *stats, +- u64 *data) ++static void dpaa2_eth_get_ethtool_stats(struct net_device *net_dev, ++ struct ethtool_stats *stats, ++ u64 *data) + { + int i; /* Current index in the data array */ + int j, k, err; +@@ -236,9 +224,9 @@ static void dpaa2_get_ethtool_stats(stru + u32 buf_cnt; + #endif + u64 cdan = 0; +- u64 portal_busy = 0; ++ u64 portal_busy = 0, pull_err = 0; + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); +- struct dpaa2_eth_stats *extras; ++ struct dpaa2_eth_drv_stats *extras; + struct dpaa2_eth_ch_stats *ch_stats; + + memset(data, 0, +@@ -266,16 +254,18 @@ static void dpaa2_get_ethtool_stats(stru + ch_stats = &priv->channel[j]->stats; + cdan += ch_stats->cdan; + portal_busy += ch_stats->dequeue_portal_busy; ++ pull_err += ch_stats->pull_err; + } + + *(data + i++) = portal_busy; ++ *(data + i++) = pull_err; + *(data + i++) = cdan; + + #ifdef CONFIG_FSL_QBMAN_DEBUG + for (j = 0; j < priv->num_fqs; j++) { + /* Print FQ instantaneous counts */ + err = dpaa2_io_query_fq_count(NULL, priv->fq[j].fqid, +- &fcnt, &bcnt); ++ &fcnt, &bcnt); + if (err) { + netdev_warn(net_dev, "FQ query error %d", err); + return; +@@ -303,12 +293,12 @@ static void dpaa2_get_ethtool_stats(stru + #endif + } + +-static const struct dpaa2_hash_fields { ++static const struct dpaa2_eth_hash_fields { + u64 rxnfc_field; + enum net_prot cls_prot; + int cls_field; + int size; +-} dpaa2_hash_fields[] = { ++} hash_fields[] = { + { + /* L2 header */ + .rxnfc_field = RXH_L2DA, +@@ -353,55 +343,53 @@ static const struct dpaa2_hash_fields { + }, + }; + +-static int dpaa2_cls_is_enabled(struct net_device *net_dev, u64 flag) ++static int cls_is_enabled(struct net_device *net_dev, u64 flag) + { + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + + return !!(priv->rx_hash_fields & flag); + } + +-static int dpaa2_cls_key_off(struct net_device *net_dev, u64 flag) ++static int cls_key_off(struct net_device *net_dev, u64 flag) + { + int i, off = 0; + +- for (i = 0; i < ARRAY_SIZE(dpaa2_hash_fields); i++) { +- if (dpaa2_hash_fields[i].rxnfc_field & flag) ++ for (i = 0; i < ARRAY_SIZE(hash_fields); i++) { ++ if (hash_fields[i].rxnfc_field & flag) + return off; +- if (dpaa2_cls_is_enabled(net_dev, +- dpaa2_hash_fields[i].rxnfc_field)) +- off += dpaa2_hash_fields[i].size; ++ if (cls_is_enabled(net_dev, hash_fields[i].rxnfc_field)) ++ off += hash_fields[i].size; + } + + return -1; + } + +-static u8 dpaa2_cls_key_size(struct net_device *net_dev) ++static u8 cls_key_size(struct net_device *net_dev) + { + u8 i, size = 0; + +- for (i = 0; i < ARRAY_SIZE(dpaa2_hash_fields); i++) { +- if (!dpaa2_cls_is_enabled(net_dev, +- dpaa2_hash_fields[i].rxnfc_field)) ++ for (i = 0; i < ARRAY_SIZE(hash_fields); i++) { ++ if (!cls_is_enabled(net_dev, hash_fields[i].rxnfc_field)) + continue; +- size += dpaa2_hash_fields[i].size; ++ size += hash_fields[i].size; + } + + return size; + } + +-static u8 dpaa2_cls_max_key_size(struct net_device *net_dev) ++static u8 cls_max_key_size(struct net_device *net_dev) + { + u8 i, size = 0; + +- for (i = 0; i < ARRAY_SIZE(dpaa2_hash_fields); i++) +- size += dpaa2_hash_fields[i].size; ++ for (i = 0; i < ARRAY_SIZE(hash_fields); i++) ++ size += hash_fields[i].size; + + return size; + } + +-void dpaa2_cls_check(struct net_device *net_dev) ++void check_fs_support(struct net_device *net_dev) + { +- u8 key_size = dpaa2_cls_max_key_size(net_dev); ++ u8 key_size = cls_max_key_size(net_dev); + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + + if (priv->dpni_attrs.options & DPNI_OPT_DIST_FS && +@@ -417,7 +405,7 @@ void dpaa2_cls_check(struct net_device * + /* Set RX hash options + * flags is a combination of RXH_ bits + */ +-int dpaa2_set_hash(struct net_device *net_dev, u64 flags) ++int dpaa2_eth_set_hash(struct net_device *net_dev, u64 flags) + { + struct device *dev = net_dev->dev.parent; + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); +@@ -441,11 +429,11 @@ int dpaa2_set_hash(struct net_device *ne + + memset(&cls_cfg, 0, sizeof(cls_cfg)); + +- for (i = 0; i < ARRAY_SIZE(dpaa2_hash_fields); i++) { ++ for (i = 0; i < ARRAY_SIZE(hash_fields); i++) { + struct dpkg_extract *key = + &cls_cfg.extracts[cls_cfg.num_extracts]; + +- if (!(flags & dpaa2_hash_fields[i].rxnfc_field)) ++ if (!(flags & hash_fields[i].rxnfc_field)) + continue; + + if (cls_cfg.num_extracts >= DPKG_MAX_NUM_OF_EXTRACTS) { +@@ -454,14 +442,12 @@ int dpaa2_set_hash(struct net_device *ne + } + + key->type = DPKG_EXTRACT_FROM_HDR; +- key->extract.from_hdr.prot = +- dpaa2_hash_fields[i].cls_prot; ++ key->extract.from_hdr.prot = hash_fields[i].cls_prot; + key->extract.from_hdr.type = DPKG_FULL_FIELD; +- key->extract.from_hdr.field = +- dpaa2_hash_fields[i].cls_field; ++ key->extract.from_hdr.field = hash_fields[i].cls_field; + cls_cfg.num_extracts++; + +- enabled_flags |= dpaa2_hash_fields[i].rxnfc_field; ++ enabled_flags |= hash_fields[i].rxnfc_field; + } + + dma_mem = kzalloc(DPAA2_CLASSIFIER_DMA_SIZE, GFP_DMA | GFP_KERNEL); +@@ -486,7 +472,7 @@ int dpaa2_set_hash(struct net_device *ne + return -ENOMEM; + } + +- dist_cfg.dist_size = dpaa2_queue_count(priv); ++ dist_cfg.dist_size = dpaa2_eth_queue_count(priv); + if (dpaa2_eth_fs_enabled(priv)) { + dist_cfg.dist_mode = DPNI_DIST_MODE_FS; + dist_cfg.fs_cfg.miss_action = DPNI_FS_MISS_HASH; +@@ -508,14 +494,14 @@ int dpaa2_set_hash(struct net_device *ne + return 0; + } + +-static int dpaa2_cls_prep_rule(struct net_device *net_dev, +- struct ethtool_rx_flow_spec *fs, +- void *key) ++static int prep_cls_rule(struct net_device *net_dev, ++ struct ethtool_rx_flow_spec *fs, ++ void *key) + { + struct ethtool_tcpip4_spec *l4ip4_h, *l4ip4_m; + struct ethhdr *eth_h, *eth_m; + struct ethtool_flow_ext *ext_h, *ext_m; +- const u8 key_size = dpaa2_cls_key_size(net_dev); ++ const u8 key_size = cls_key_size(net_dev); + void *msk = key + key_size; + + memset(key, 0, key_size * 2); +@@ -546,51 +532,47 @@ l4ip4: + "ToS is not supported for IPv4 L4\n"); + return -EOPNOTSUPP; + } +- if (l4ip4_m->ip4src && +- !dpaa2_cls_is_enabled(net_dev, RXH_IP_SRC)) { ++ if (l4ip4_m->ip4src && !cls_is_enabled(net_dev, RXH_IP_SRC)) { + netdev_err(net_dev, "IP SRC not supported!\n"); + return -EOPNOTSUPP; + } +- if (l4ip4_m->ip4dst && +- !dpaa2_cls_is_enabled(net_dev, RXH_IP_DST)) { ++ if (l4ip4_m->ip4dst && !cls_is_enabled(net_dev, RXH_IP_DST)) { + netdev_err(net_dev, "IP DST not supported!\n"); + return -EOPNOTSUPP; + } +- if (l4ip4_m->psrc && +- !dpaa2_cls_is_enabled(net_dev, RXH_L4_B_0_1)) { ++ if (l4ip4_m->psrc && !cls_is_enabled(net_dev, RXH_L4_B_0_1)) { + netdev_err(net_dev, "PSRC not supported, ignored\n"); + return -EOPNOTSUPP; + } +- if (l4ip4_m->pdst && +- !dpaa2_cls_is_enabled(net_dev, RXH_L4_B_2_3)) { ++ if (l4ip4_m->pdst && !cls_is_enabled(net_dev, RXH_L4_B_2_3)) { + netdev_err(net_dev, "PDST not supported, ignored\n"); + return -EOPNOTSUPP; + } + +- if (dpaa2_cls_is_enabled(net_dev, RXH_IP_SRC)) { +- *(u32 *)(key + dpaa2_cls_key_off(net_dev, RXH_IP_SRC)) ++ if (cls_is_enabled(net_dev, RXH_IP_SRC)) { ++ *(u32 *)(key + cls_key_off(net_dev, RXH_IP_SRC)) + = l4ip4_h->ip4src; +- *(u32 *)(msk + dpaa2_cls_key_off(net_dev, RXH_IP_SRC)) ++ *(u32 *)(msk + cls_key_off(net_dev, RXH_IP_SRC)) + = l4ip4_m->ip4src; + } +- if (dpaa2_cls_is_enabled(net_dev, RXH_IP_DST)) { +- *(u32 *)(key + dpaa2_cls_key_off(net_dev, RXH_IP_DST)) ++ if (cls_is_enabled(net_dev, RXH_IP_DST)) { ++ *(u32 *)(key + cls_key_off(net_dev, RXH_IP_DST)) + = l4ip4_h->ip4dst; +- *(u32 *)(msk + dpaa2_cls_key_off(net_dev, RXH_IP_DST)) ++ *(u32 *)(msk + cls_key_off(net_dev, RXH_IP_DST)) + = l4ip4_m->ip4dst; + } + +- if (dpaa2_cls_is_enabled(net_dev, RXH_L4_B_0_1)) { +- *(u32 *)(key + dpaa2_cls_key_off(net_dev, RXH_L4_B_0_1)) ++ if (cls_is_enabled(net_dev, RXH_L4_B_0_1)) { ++ *(u32 *)(key + cls_key_off(net_dev, RXH_L4_B_0_1)) + = l4ip4_h->psrc; +- *(u32 *)(msk + dpaa2_cls_key_off(net_dev, RXH_L4_B_0_1)) ++ *(u32 *)(msk + cls_key_off(net_dev, RXH_L4_B_0_1)) + = l4ip4_m->psrc; + } + +- if (dpaa2_cls_is_enabled(net_dev, RXH_L4_B_2_3)) { +- *(u32 *)(key + dpaa2_cls_key_off(net_dev, RXH_L4_B_2_3)) ++ if (cls_is_enabled(net_dev, RXH_L4_B_2_3)) { ++ *(u32 *)(key + cls_key_off(net_dev, RXH_L4_B_2_3)) + = l4ip4_h->pdst; +- *(u32 *)(msk + dpaa2_cls_key_off(net_dev, RXH_L4_B_2_3)) ++ *(u32 *)(msk + cls_key_off(net_dev, RXH_L4_B_2_3)) + = l4ip4_m->pdst; + } + break; +@@ -609,12 +591,10 @@ l4ip4: + return -EOPNOTSUPP; + } + +- if (dpaa2_cls_is_enabled(net_dev, RXH_L2DA)) { +- ether_addr_copy(key +- + dpaa2_cls_key_off(net_dev, RXH_L2DA), ++ if (cls_is_enabled(net_dev, RXH_L2DA)) { ++ ether_addr_copy(key + cls_key_off(net_dev, RXH_L2DA), + eth_h->h_dest); +- ether_addr_copy(msk +- + dpaa2_cls_key_off(net_dev, RXH_L2DA), ++ ether_addr_copy(msk + cls_key_off(net_dev, RXH_L2DA), + eth_m->h_dest); + } else { + if (!is_zero_ether_addr(eth_m->h_dest)) { +@@ -639,12 +619,10 @@ l4ip4: + ext_h = &fs->h_ext; + ext_m = &fs->m_ext; + +- if (dpaa2_cls_is_enabled(net_dev, RXH_L2DA)) { +- ether_addr_copy(key +- + dpaa2_cls_key_off(net_dev, RXH_L2DA), ++ if (cls_is_enabled(net_dev, RXH_L2DA)) { ++ ether_addr_copy(key + cls_key_off(net_dev, RXH_L2DA), + ext_h->h_dest); +- ether_addr_copy(msk +- + dpaa2_cls_key_off(net_dev, RXH_L2DA), ++ ether_addr_copy(msk + cls_key_off(net_dev, RXH_L2DA), + ext_m->h_dest); + } else { + if (!is_zero_ether_addr(ext_m->h_dest)) { +@@ -657,9 +635,9 @@ l4ip4: + return 0; + } + +-static int dpaa2_do_cls(struct net_device *net_dev, +- struct ethtool_rx_flow_spec *fs, +- bool add) ++static int do_cls(struct net_device *net_dev, ++ struct ethtool_rx_flow_spec *fs, ++ bool add) + { + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + const int rule_cnt = DPAA2_CLASSIFIER_ENTRY_COUNT; +@@ -674,19 +652,19 @@ static int dpaa2_do_cls(struct net_devic + } + + if ((fs->ring_cookie != RX_CLS_FLOW_DISC && +- fs->ring_cookie >= dpaa2_queue_count(priv)) || ++ fs->ring_cookie >= dpaa2_eth_queue_count(priv)) || + fs->location >= rule_cnt) + return -EINVAL; + + memset(&rule_cfg, 0, sizeof(rule_cfg)); +- rule_cfg.key_size = dpaa2_cls_key_size(net_dev); ++ rule_cfg.key_size = cls_key_size(net_dev); + + /* allocate twice the key size, for the actual key and for mask */ + dma_mem = kzalloc(rule_cfg.key_size * 2, GFP_DMA | GFP_KERNEL); + if (!dma_mem) + return -ENOMEM; + +- err = dpaa2_cls_prep_rule(net_dev, fs, dma_mem); ++ err = prep_cls_rule(net_dev, fs, dma_mem); + if (err) + goto err_free_mem; + +@@ -735,13 +713,13 @@ err_free_mem: + return err; + } + +-static int dpaa2_add_cls(struct net_device *net_dev, +- struct ethtool_rx_flow_spec *fs) ++static int add_cls(struct net_device *net_dev, ++ struct ethtool_rx_flow_spec *fs) + { + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + int err; + +- err = dpaa2_do_cls(net_dev, fs, true); ++ err = do_cls(net_dev, fs, true); + if (err) + return err; + +@@ -751,12 +729,12 @@ static int dpaa2_add_cls(struct net_devi + return 0; + } + +-static int dpaa2_del_cls(struct net_device *net_dev, int location) ++static int del_cls(struct net_device *net_dev, int location) + { + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + int err; + +- err = dpaa2_do_cls(net_dev, &priv->cls_rule[location].fs, false); ++ err = do_cls(net_dev, &priv->cls_rule[location].fs, false); + if (err) + return err; + +@@ -765,7 +743,7 @@ static int dpaa2_del_cls(struct net_devi + return 0; + } + +-static void dpaa2_clear_cls(struct net_device *net_dev) ++static void clear_cls(struct net_device *net_dev) + { + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + int i, err; +@@ -774,7 +752,7 @@ static void dpaa2_clear_cls(struct net_d + if (!priv->cls_rule[i].in_use) + continue; + +- err = dpaa2_del_cls(net_dev, i); ++ err = del_cls(net_dev, i); + if (err) + netdev_warn(net_dev, + "err trying to delete classification entry %d\n", +@@ -782,8 +760,8 @@ static void dpaa2_clear_cls(struct net_d + } + } + +-static int dpaa2_set_rxnfc(struct net_device *net_dev, +- struct ethtool_rxnfc *rxnfc) ++static int dpaa2_eth_set_rxnfc(struct net_device *net_dev, ++ struct ethtool_rxnfc *rxnfc) + { + int err = 0; + +@@ -792,19 +770,19 @@ static int dpaa2_set_rxnfc(struct net_de + /* first off clear ALL classification rules, chaging key + * composition will break them anyway + */ +- dpaa2_clear_cls(net_dev); ++ clear_cls(net_dev); + /* we purposely ignore cmd->flow_type for now, because the + * classifier only supports a single set of fields for all + * protocols + */ +- err = dpaa2_set_hash(net_dev, rxnfc->data); ++ err = dpaa2_eth_set_hash(net_dev, rxnfc->data); + break; + case ETHTOOL_SRXCLSRLINS: +- err = dpaa2_add_cls(net_dev, &rxnfc->fs); ++ err = add_cls(net_dev, &rxnfc->fs); + break; + + case ETHTOOL_SRXCLSRLDEL: +- err = dpaa2_del_cls(net_dev, rxnfc->fs.location); ++ err = del_cls(net_dev, rxnfc->fs.location); + break; + + default: +@@ -814,8 +792,8 @@ static int dpaa2_set_rxnfc(struct net_de + return err; + } + +-static int dpaa2_get_rxnfc(struct net_device *net_dev, +- struct ethtool_rxnfc *rxnfc, u32 *rule_locs) ++static int dpaa2_eth_get_rxnfc(struct net_device *net_dev, ++ struct ethtool_rxnfc *rxnfc, u32 *rule_locs) + { + struct dpaa2_eth_priv *priv = netdev_priv(net_dev); + const int rule_cnt = DPAA2_CLASSIFIER_ENTRY_COUNT; +@@ -831,7 +809,7 @@ static int dpaa2_get_rxnfc(struct net_de + break; + + case ETHTOOL_GRXRINGS: +- rxnfc->data = dpaa2_queue_count(priv); ++ rxnfc->data = dpaa2_eth_queue_count(priv); + break; + + case ETHTOOL_GRXCLSRLCNT: +@@ -868,15 +846,13 @@ static int dpaa2_get_rxnfc(struct net_de + } + + const struct ethtool_ops dpaa2_ethtool_ops = { +- .get_drvinfo = dpaa2_get_drvinfo, +- .get_msglevel = dpaa2_get_msglevel, +- .set_msglevel = dpaa2_set_msglevel, ++ .get_drvinfo = dpaa2_eth_get_drvinfo, + .get_link = ethtool_op_get_link, +- .get_settings = dpaa2_get_settings, +- .set_settings = dpaa2_set_settings, +- .get_sset_count = dpaa2_get_sset_count, +- .get_ethtool_stats = dpaa2_get_ethtool_stats, +- .get_strings = dpaa2_get_strings, +- .get_rxnfc = dpaa2_get_rxnfc, +- .set_rxnfc = dpaa2_set_rxnfc, ++ .get_settings = dpaa2_eth_get_settings, ++ .set_settings = dpaa2_eth_set_settings, ++ .get_sset_count = dpaa2_eth_get_sset_count, ++ .get_ethtool_stats = dpaa2_eth_get_ethtool_stats, ++ .get_strings = dpaa2_eth_get_strings, ++ .get_rxnfc = dpaa2_eth_get_rxnfc, ++ .set_rxnfc = dpaa2_eth_set_rxnfc, + }; diff --git a/target/linux/layerscape/patches-4.4/7203-fsl-dpaa2-eth-Update-description-of-DPNI-counters.patch b/target/linux/layerscape/patches-4.4/7203-fsl-dpaa2-eth-Update-description-of-DPNI-counters.patch new file mode 100644 index 0000000000..41d1c04e20 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7203-fsl-dpaa2-eth-Update-description-of-DPNI-counters.patch @@ -0,0 +1,37 @@ +From 727de4692d731655dea96702aa099f4f4d3a5203 Mon Sep 17 00:00:00 2001 +From: Bogdan Hamciuc +Date: Mon, 21 Mar 2016 16:10:01 +0200 +Subject: [PATCH 203/226] fsl-dpaa2: eth: Update description of DPNI counters + +Update description of DPNI counters presented with "ethtool -S". + +Signed-off-by: Bogdan Hamciuc +(cherry picked from commit f68aab60355d00af13fdff2ded7bf38809beacd3) +--- + drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c | 9 ++++++--- + 1 file changed, 6 insertions(+), 3 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-ethtool.c +@@ -39,15 +39,18 @@ + char dpaa2_ethtool_stats[][ETH_GSTRING_LEN] = { + "rx frames", + "rx bytes", +- "rx frames dropped", +- "rx err frames", ++ /* rx frames filtered/policed */ ++ "rx filtered frames", ++ /* rx frames dropped with errors */ ++ "rx discarded frames", + "rx mcast frames", + "rx mcast bytes", + "rx bcast frames", + "rx bcast bytes", + "tx frames", + "tx bytes", +- "tx err frames", ++ /* tx frames dropped with errors */ ++ "tx discarded frames", + }; + + #define DPAA2_ETH_NUM_STATS ARRAY_SIZE(dpaa2_ethtool_stats) diff --git a/target/linux/layerscape/patches-4.4/7204-fsl-dpaa2-eth-dpni-Clear-compiler-warnings.patch b/target/linux/layerscape/patches-4.4/7204-fsl-dpaa2-eth-dpni-Clear-compiler-warnings.patch new file mode 100644 index 0000000000..ff74d13003 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7204-fsl-dpaa2-eth-dpni-Clear-compiler-warnings.patch @@ -0,0 +1,38 @@ +From 9a38e2ce3b46a2bdc90b4ad190a26f9418909450 Mon Sep 17 00:00:00 2001 +From: Bogdan Hamciuc +Date: Tue, 29 Mar 2016 13:23:50 +0300 +Subject: [PATCH 204/226] fsl-dpaa2: eth: dpni: Clear compiler warnings +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Clear two warnings given by -Wcast-qual: +warning: cast discards ‘__attribute__((const))’ qualifier from pointer +target type + +Signed-off-by: Bogdan Hamciuc +(cherry picked from commit 96d14f291c2750e8b09268cecb84bfe7f013294d) +--- + drivers/staging/fsl-dpaa2/ethernet/dpni.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/ethernet/dpni.c ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpni.c +@@ -128,7 +128,7 @@ int dpni_prepare_extended_cfg(const stru + int dpni_extract_extended_cfg(struct dpni_extended_cfg *cfg, + const uint8_t *ext_cfg_buf) + { +- uint64_t *ext_params = (uint64_t *)ext_cfg_buf; ++ const uint64_t *ext_params = (const uint64_t *)ext_cfg_buf; + + DPNI_EXT_EXTENDED_CFG(ext_params, cfg); + +@@ -1651,7 +1651,7 @@ void dpni_prepare_early_drop(const struc + void dpni_extract_early_drop(struct dpni_early_drop_cfg *cfg, + const uint8_t *early_drop_buf) + { +- uint64_t *ext_params = (uint64_t *)early_drop_buf; ++ const uint64_t *ext_params = (const uint64_t *)early_drop_buf; + + DPNI_EXT_EARLY_DROP(ext_params, cfg); + } diff --git a/target/linux/layerscape/patches-4.4/7205-fsl-dpaa2-eth-sanitize-supported-private-flags.patch b/target/linux/layerscape/patches-4.4/7205-fsl-dpaa2-eth-sanitize-supported-private-flags.patch new file mode 100644 index 0000000000..0f96213a13 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7205-fsl-dpaa2-eth-sanitize-supported-private-flags.patch @@ -0,0 +1,57 @@ +From 51106cb1fd14dfbf62c2760921463376f56ac732 Mon Sep 17 00:00:00 2001 +From: Bogdan Purcareata +Date: Tue, 21 Jun 2016 18:40:47 +0000 +Subject: [PATCH 205/226] fsl-dpaa2: eth: sanitize supported private flags + +On linux-v4.6 with CONFIG_MACVLAN=y, when bringing up a ni interface, the +network stack crashes due to a segfault. This is related to the +macvlan_device_event notifier, which registers itself to all the network +interface in the system. + +The notifier reads the netdev private flags and incorrectly qualifies +the interface as a macvlan port, since both the IFF_MACVLAN_PORT and +IFF_PROMISC flags have the same offset. Code spelunking reveals that +IFF_PROMISC is only used as an interface flag, not a private interface +flag. + +A similar situation happens with IFF_ALLMULTI, which overlaps with +IFF_BRIDGE_PORT. No info on the consequences of this, since I haven't +tested bridge scenarios. The interface can still be set in allmulti +mode using userspace tools (e.g. ifconfig). + +IFF_MULTICAST overlaps with IFF_UNICAST_FLT, therefore the current code +has no effect as it is. The closest multicast activation based on device +capabilities has been seen in the case of the Aeroflex Gaisler Ethernet +MAC (aeroflex/greth.c) - here, the runtime (not private) flag is set on +device probe. On a side node, ether_setup enables IFF_MULTICAST by default. + +Remove IFF_PROMISC, IFF_ALLMULTI and IFF_MULTICAST from device capabilities +init. + +Signed-off-by: Bogdan Purcareata +--- + drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 7 +------ + 1 file changed, 1 insertion(+), 6 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c +@@ -1176,18 +1176,13 @@ static int dpaa2_eth_init(struct net_dev + u32 options = priv->dpni_attrs.options; + + /* Capabilities listing */ +- supported |= IFF_LIVE_ADDR_CHANGE | IFF_PROMISC | IFF_ALLMULTI; ++ supported |= IFF_LIVE_ADDR_CHANGE; + + if (options & DPNI_OPT_UNICAST_FILTER) + supported |= IFF_UNICAST_FLT; + else + not_supported |= IFF_UNICAST_FLT; + +- if (options & DPNI_OPT_MULTICAST_FILTER) +- supported |= IFF_MULTICAST; +- else +- not_supported |= IFF_MULTICAST; +- + net_dev->priv_flags |= supported; + net_dev->priv_flags &= ~not_supported; + diff --git a/target/linux/layerscape/patches-4.4/7206-fsl-dpaa2-eth-match-id-cleanup.patch b/target/linux/layerscape/patches-4.4/7206-fsl-dpaa2-eth-match-id-cleanup.patch new file mode 100644 index 0000000000..bdb0f58958 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7206-fsl-dpaa2-eth-match-id-cleanup.patch @@ -0,0 +1,26 @@ +From 7e536d0c2f870b39480268c20af6fc3d21abe611 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 15 Jun 2016 14:03:43 -0500 +Subject: [PATCH 206/226] fsl-dpaa2: eth: match id cleanup + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c +@@ -2787,12 +2787,10 @@ static int dpaa2_eth_remove(struct fsl_m + return 0; + } + +-static const struct fsl_mc_device_match_id dpaa2_eth_match_id_table[] = { ++static const struct fsl_mc_device_id dpaa2_eth_match_id_table[] = { + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dpni", +- .ver_major = DPNI_VER_MAJOR, +- .ver_minor = DPNI_VER_MINOR + }, + { .vendor = 0x0 } + }; diff --git a/target/linux/layerscape/patches-4.4/7207-fsl-dpaa2-eth-add-device-table-to-driver.patch b/target/linux/layerscape/patches-4.4/7207-fsl-dpaa2-eth-add-device-table-to-driver.patch new file mode 100644 index 0000000000..b7885cf01a --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7207-fsl-dpaa2-eth-add-device-table-to-driver.patch @@ -0,0 +1,22 @@ +From 8557c8a3823b341607e16048d8318a1958eab3a9 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Thu, 12 May 2016 17:52:28 -0500 +Subject: [PATCH 207/226] fsl-dpaa2: eth: add device table to driver + +this is needed to have the driver loaded as a module + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c ++++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c +@@ -2794,6 +2794,7 @@ static const struct fsl_mc_device_id dpa + }, + { .vendor = 0x0 } + }; ++MODULE_DEVICE_TABLE(fslmc, dpaa2_eth_match_id_table); + + static struct fsl_mc_driver dpaa2_eth_driver = { + .driver = { diff --git a/target/linux/layerscape/patches-4.4/7208-staging-fsl-dpaa2-mac-Added-MAC-PHY-interface-driver.patch b/target/linux/layerscape/patches-4.4/7208-staging-fsl-dpaa2-mac-Added-MAC-PHY-interface-driver.patch new file mode 100644 index 0000000000..42a23a598c --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7208-staging-fsl-dpaa2-mac-Added-MAC-PHY-interface-driver.patch @@ -0,0 +1,2347 @@ +From ecaf55d2907835cd0580903e134cdf08416ff694 Mon Sep 17 00:00:00 2001 +From: Bogdan Hamciuc +Date: Tue, 15 Sep 2015 10:27:19 -0500 +Subject: [PATCH 208/226] staging: fsl-dpaa2: mac: Added MAC / PHY interface + driver + +This is a commit of the cummulative, squashed dpmac patches. +All the commit logs are preserved below. + +Signed-off-by: Stuart Yoder + +-------------------------------------------------------------- + +flib,dpmac: add dpmac files (Rebasing onto kernel 3.19, MC 0.6) + +patches moved from 4.0 kernel + +Signed-off-by: Bogdan Hamciuc +[Stuart: cherry-picked patch and split it up] +Signed-off-by: Stuart Yoder + +staging: fsl-dpaa2: mac: Added MAC / PHY interface driver. + +This driver works as a proxy between phylib including phy drivers and +the MC firmware. It receives updates on link state changes from PHY +lib and forwards them to MC and receives interrupt from MC whenever +a request is made to change the link state. + +Signed-off-by: Alex Marginean +Change-Id: I8097ea69ea8effded3bddd43b9d326bbb59ba6c8 +Reviewed-on: http://git.am.freescale.net:8181/35113 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +fsl-dpaa2: mac: Change IRQ flags + +Signed-off-by: Bogdan Hamciuc +Change-Id: Ia86570858f9cf7f673089cd7c2078662d56b2f01 +Reviewed-on: http://git.am.freescale.net:8181/35581 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +fsl-dpaa2: mac: Check for actual link state change + +Do not invoke the MC firmware if the link state hasn't changed. + +Signed-off-by: Alex Marginean +Change-Id: Iba59d8b52c72334efa28f6126e50ec821c802852 +Reviewed-on: http://git.am.freescale.net:8181/35582 +Reviewed-by: Bogdan Hamciuc +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +fsl-dpaa2: mac: Fix "dpmac netdevs" probing + +Fixup code under DPAA2_MAC_NETDEVS to probe again. In particular, remove +the temporary addition of "fixed.c" in the mac/ folder. + +Signed-off-by: Bogdan Hamciuc +Change-Id: Iea6768f3c5cd9b2de2c8421c03ecebf155b9792b +Reviewed-on: http://git.am.freescale.net:8181/37673 +Reviewed-by: Ruxandra Ioana Radulescu +Reviewed-by: Stuart Yoder +Tested-by: Stuart Yoder + +flib: Remove duplicate header files + +These files are included by the DPAA2 mac driver files. + +Signed-off-by: Razvan Stefanescu +Change-Id: Ieff56e3c34393ef65a5ac1123aaf00bacefa050c +Reviewed-on: http://git.am.freescale.net:8181/37257 +Reviewed-by: Alexandru Marginean +Reviewed-by: Stuart Yoder +Tested-by: Stuart Yoder + +fsl-dpaa2: mac: Add dependency on CONFIG_FIXED_PHY + +The DPAA2 DPMAC driver currently relies on fixed links, so it will fail +to probe in unusual ways if CONFIG_FIXED_PHY is not enabled. + +Signed-off-by: Bogdan Hamciuc +Change-Id: Ibc53226a215ed85a2ba22c55b18595fb939e7418 +Reviewed-on: http://git.am.freescale.net:8181/37687 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Stuart Yoder + +fsl-dpaa2: mac: Fix macro + +Remove macro ending backslash. + +Signed-off-by: Razvan Stefanescu +Change-Id: Ib0c4a41eee8fbe4aa7c991fc7fdb87771d3bf594 +Reviewed-on: http://git.am.freescale.net:8181/37254 +Tested-by: Review Code-CDREVIEW +Reviewed-by: Alexandru Marginean +Reviewed-by: Stuart Yoder + +fsl-dpaa2: mac: migrated remaining flibs for MC fw 8.0.0 + +Signed-off-by: J. German Rivera +[Stuart: split mac part out of original patch, updated subject] +Signed-off-by: Stuart Yoder + +staging: fsl-dpaa2: mac: Port to MC-0.7 Flibs + +Change-Id: Ief731e245bdc207f1bf8e7ff4dfdabb445d6010e +Signed-off-by: Bogdan Hamciuc +Reviewed-on: http://git.am.freescale.net:8181/39151 +Reviewed-by: Stuart Yoder +Tested-by: Stuart Yoder + +staging: fsl-dpaa2: mac: Do programing of MSIs in devm_request_threaded_irq() + +With the new dprc_set_obj_irq() we can now program MSIS in the device +in the callback invoked from devm_request_threaded_irq(). +Since this callback is invoked with interrupts disabled, we need to +use an atomic portal, instead of the root DPRC's built-in portal +which is non-atomic. + +Signed-off-by: Itai Katz +Signed-off-by: J. German Rivera +[Stuart: split original patch up by component] +Signed-off-by: Stuart Yoder + +fsl-dpaa2: mac: Fix driver probing + +The DPMAC probing function was broken in many ways. This patch adds +the following fixes: + - Look up PHY nodes based on the phy-handle property of the respective + DPMAC node; + - Defer DPMAC device probing until the MDIO MUX driver probes first (we + depend on that for configuring the PHYs on PCIe riser cards on + LS2085A QDS boards. + - Add Kconfig dependencies on XGMAC_MDIO and MDIO_BUS_MUX_MMIOREG. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Fix interrupt handling + +The DPMAC has two interrupt events muxed on a single interrupt line. +Both the PHY and the DPNI can initiate a link event. + +When the link event is initiated by the PHY (possibly as the effect of an +earlier link change request initiated by a DPNI), we must make sure +dpmac_set_link_state() is explicitly called in order for the event to be +propagated (back) to the DPNI. + +Finally, DPMAC interrupt mask has to be explicitly specified before calling +dpmac_set_irq_enabled(). + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Fix print in case device is not initialized + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Fix error paths at probe + +Merge error condition checks. Add error codes to the early exit paths. +Fix swapped goto labels. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Remove unused function prototype + +fixed_phy_register_2() was a leftover since we had to backport fixed PHY +implementation on kernel v3.10. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2/mac: Update dpmac binary interface to v3.2 + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: mac: Update Flib to MC 0.8.1 + +In practice, this adds a counter for "good" egress frames. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Add counter for "good" egress frames + +Now available with the 0.8.1 Flibs. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Update dpmac_set_link_state() error checking + +As of 0.8.1 Flibs, dpmac_set_link_state() no longer returns what we'd +consider spurious errors. This allows for cleaner error checking on +DPMAC-side. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Remove __cold attribute + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Check DPMAC FLIB version + +Make sure we support the DPMAC version, otherwise abort probing +early on and provide an error message. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: mac: Replace uintX_t with uX + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Fix crash on error path + +If the fixed-phy cannot be correctly registered, unregister_netdev() +receives a non-NULL, yet invalid phydev. Force the phydev reference to +NULL to avoid a crash on the probe routine's error path. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Remove TODOs comments from the code + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Fix ppx_eth_iface_mode order + +ppx_eth_iface_mode must be kept in sync with enum dpmac_eth_if, but some +array values weren't in the right order. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Remove forward declarations of functions + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Remove ppx_{err,warn,info} macros + +Replace with their straighforward equivalents, their contexts being +non-ambiguous. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Use non-atomic MC portal + +The DPMAC driver does not make MC calls from atomic contexts, so it is +safe to request non-atomic MC portals. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: Replace "ppx" prefix with "dpaa2_mac" + +Use a similar naming convention as for the Ethernet driver, +replacing "ppx" with "dpaa2_mac" as prefix for functions and +structures. + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: mac: Remove unnecessary blank line + +Signed-off-by: Ioana Radulescu + +fsl-dpaa2: mac: Do not handle link change confirmation interrupt + +The need for that interrupt is more about debugging. + +Signed-off-by: Bogdan Hamciuc + +fsl-dpaa2: mac: resolve compile issues on uprev to 4.5 + +-interrupt info in mc struct changed upstream +-fixed_phy_register() had new argument + +Signed-off-by: Stuart Yoder +--- + MAINTAINERS | 6 + + drivers/staging/fsl-dpaa2/Kconfig | 1 + + drivers/staging/fsl-dpaa2/Makefile | 1 + + drivers/staging/fsl-dpaa2/mac/Kconfig | 24 + + drivers/staging/fsl-dpaa2/mac/Makefile | 10 + + drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h | 195 ++++++++ + drivers/staging/fsl-dpaa2/mac/dpmac.c | 422 ++++++++++++++++ + drivers/staging/fsl-dpaa2/mac/dpmac.h | 593 ++++++++++++++++++++++ + drivers/staging/fsl-dpaa2/mac/mac.c | 767 +++++++++++++++++++++++++++++ + 9 files changed, 2019 insertions(+) + create mode 100644 drivers/staging/fsl-dpaa2/mac/Kconfig + create mode 100644 drivers/staging/fsl-dpaa2/mac/Makefile + create mode 100644 drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h + create mode 100644 drivers/staging/fsl-dpaa2/mac/dpmac.c + create mode 100644 drivers/staging/fsl-dpaa2/mac/dpmac.h + create mode 100644 drivers/staging/fsl-dpaa2/mac/mac.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -4554,6 +4554,12 @@ S: Maintained + F: drivers/staging/fsl-mc/bus/mc-ioctl.h + F: drivers/staging/fsl-mc/bus/mc-restool.c + ++FREESCALE DPAA2 MAC/PHY INTERFACE DRIVER ++M: Alex Marginean ++L: linux-kernel@vger.kernel.org ++S: Maintained ++F: drivers/staging/fsl-dpaa2/mac/ ++ + FREEVXFS FILESYSTEM + M: Christoph Hellwig + W: ftp://ftp.openlinux.org/pub/people/hch/vxfs +--- a/drivers/staging/fsl-dpaa2/Kconfig ++++ b/drivers/staging/fsl-dpaa2/Kconfig +@@ -9,3 +9,4 @@ config FSL_DPAA2 + Build drivers for Freescale DataPath Acceleration Architecture (DPAA2) family of SoCs. + # TODO move DPIO driver in-here? + source "drivers/staging/fsl-dpaa2/ethernet/Kconfig" ++source "drivers/staging/fsl-dpaa2/mac/Kconfig" +--- a/drivers/staging/fsl-dpaa2/Makefile ++++ b/drivers/staging/fsl-dpaa2/Makefile +@@ -3,3 +3,4 @@ + # + + obj-$(CONFIG_FSL_DPAA2_ETH) += ethernet/ ++obj-$(CONFIG_FSL_DPAA2_MAC) += mac/ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/mac/Kconfig +@@ -0,0 +1,24 @@ ++config FSL_DPAA2_MAC ++ tristate "DPAA2 MAC / PHY interface" ++ depends on FSL_MC_BUS && FSL_DPAA2 ++ select MDIO_BUS_MUX_MMIOREG ++ select FSL_XGMAC_MDIO ++ select FIXED_PHY ++ ---help--- ++ Prototype driver for DPAA2 MAC / PHY interface object. ++ This driver works as a proxy between phylib including phy drivers and ++ the MC firmware. It receives updates on link state changes from PHY ++ lib and forwards them to MC and receives interrupt from MC whenever ++ a request is made to change the link state. ++ ++ ++config FSL_DPAA2_MAC_NETDEVS ++ bool "Expose net interfaces for PHYs" ++ default n ++ depends on FSL_DPAA2_MAC ++ ---help--- ++ Exposes macX net interfaces which allow direct control over MACs and ++ PHYs. ++ . ++ Leave disabled if unsure. ++ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/mac/Makefile +@@ -0,0 +1,10 @@ ++ ++obj-$(CONFIG_FSL_DPAA2_MAC) += dpaa2-mac.o ++ ++dpaa2-mac-objs := mac.o dpmac.o ++ ++all: ++ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules ++ ++clean: ++ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/mac/dpmac-cmd.h +@@ -0,0 +1,195 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef _FSL_DPMAC_CMD_H ++#define _FSL_DPMAC_CMD_H ++ ++/* DPMAC Version */ ++#define DPMAC_VER_MAJOR 3 ++#define DPMAC_VER_MINOR 2 ++ ++/* Command IDs */ ++#define DPMAC_CMDID_CLOSE 0x800 ++#define DPMAC_CMDID_OPEN 0x80c ++#define DPMAC_CMDID_CREATE 0x90c ++#define DPMAC_CMDID_DESTROY 0x900 ++ ++#define DPMAC_CMDID_GET_ATTR 0x004 ++#define DPMAC_CMDID_RESET 0x005 ++ ++#define DPMAC_CMDID_SET_IRQ 0x010 ++#define DPMAC_CMDID_GET_IRQ 0x011 ++#define DPMAC_CMDID_SET_IRQ_ENABLE 0x012 ++#define DPMAC_CMDID_GET_IRQ_ENABLE 0x013 ++#define DPMAC_CMDID_SET_IRQ_MASK 0x014 ++#define DPMAC_CMDID_GET_IRQ_MASK 0x015 ++#define DPMAC_CMDID_GET_IRQ_STATUS 0x016 ++#define DPMAC_CMDID_CLEAR_IRQ_STATUS 0x017 ++ ++#define DPMAC_CMDID_MDIO_READ 0x0c0 ++#define DPMAC_CMDID_MDIO_WRITE 0x0c1 ++#define DPMAC_CMDID_GET_LINK_CFG 0x0c2 ++#define DPMAC_CMDID_SET_LINK_STATE 0x0c3 ++#define DPMAC_CMDID_GET_COUNTER 0x0c4 ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_CREATE(cmd, cfg) \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, cfg->mac_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_OPEN(cmd, dpmac_id) \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, dpmac_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_SET_IRQ(cmd, irq_index, irq_cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, irq_index);\ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, irq_cfg->val);\ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr); \ ++ MC_CMD_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_GET_IRQ(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_RSP_GET_IRQ(cmd, type, irq_cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val); \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr); \ ++ MC_RSP_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, type); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_SET_IRQ_ENABLE(cmd, irq_index, en) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, en); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_GET_IRQ_ENABLE(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_RSP_GET_IRQ_ENABLE(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_SET_IRQ_MASK(cmd, irq_index, mask) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, mask);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_GET_IRQ_MASK(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_RSP_GET_IRQ_MASK(cmd, mask) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mask) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_GET_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_RSP_GET_IRQ_STATUS(cmd, status) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, status) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_RSP_GET_ATTRIBUTES(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, int, attr->phy_id);\ ++ MC_RSP_OP(cmd, 0, 32, 32, int, attr->id);\ ++ MC_RSP_OP(cmd, 1, 0, 16, uint16_t, attr->version.major);\ ++ MC_RSP_OP(cmd, 1, 16, 16, uint16_t, attr->version.minor);\ ++ MC_RSP_OP(cmd, 1, 32, 8, enum dpmac_link_type, attr->link_type);\ ++ MC_RSP_OP(cmd, 1, 40, 8, enum dpmac_eth_if, attr->eth_if);\ ++ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, attr->max_rate);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_MDIO_READ(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->phy_addr); \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, cfg->reg); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_RSP_MDIO_READ(cmd, data) \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, data) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_MDIO_WRITE(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->phy_addr); \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, cfg->reg); \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->data); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_RSP_GET_LINK_CFG(cmd, cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 64, uint64_t, cfg->options); \ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, cfg->rate); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_SET_LINK_STATE(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 64, uint64_t, cfg->options); \ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->rate); \ ++ MC_CMD_OP(cmd, 2, 0, 1, int, cfg->up); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_CMD_GET_COUNTER(cmd, type) \ ++ MC_CMD_OP(cmd, 0, 0, 8, enum dpmac_counter, type) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPMAC_RSP_GET_COUNTER(cmd, counter) \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, counter) ++ ++#endif /* _FSL_DPMAC_CMD_H */ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/mac/dpmac.c +@@ -0,0 +1,422 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include "../../fsl-mc/include/mc-sys.h" ++#include "../../fsl-mc/include/mc-cmd.h" ++#include "dpmac.h" ++#include "dpmac-cmd.h" ++ ++int dpmac_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpmac_id, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_OPEN, ++ cmd_flags, ++ 0); ++ DPMAC_CMD_OPEN(cmd, dpmac_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return err; ++} ++ ++int dpmac_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CLOSE, cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpmac_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpmac_cfg *cfg, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CREATE, ++ cmd_flags, ++ 0); ++ DPMAC_CMD_CREATE(cmd, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpmac_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_DESTROY, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpmac_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpmac_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_IRQ, ++ cmd_flags, ++ token); ++ DPMAC_CMD_SET_IRQ(cmd, irq_index, irq_cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpmac_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpmac_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_IRQ, ++ cmd_flags, ++ token); ++ DPMAC_CMD_GET_IRQ(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPMAC_RSP_GET_IRQ(cmd, *type, irq_cfg); ++ ++ return 0; ++} ++ ++int dpmac_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPMAC_CMD_SET_IRQ_ENABLE(cmd, irq_index, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpmac_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPMAC_CMD_GET_IRQ_ENABLE(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPMAC_RSP_GET_IRQ_ENABLE(cmd, *en); ++ ++ return 0; ++} ++ ++int dpmac_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPMAC_CMD_SET_IRQ_MASK(cmd, irq_index, mask); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpmac_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPMAC_CMD_GET_IRQ_MASK(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPMAC_RSP_GET_IRQ_MASK(cmd, *mask); ++ ++ return 0; ++} ++ ++int dpmac_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPMAC_CMD_GET_IRQ_STATUS(cmd, irq_index, *status); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPMAC_RSP_GET_IRQ_STATUS(cmd, *status); ++ ++ return 0; ++} ++ ++int dpmac_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_CLEAR_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPMAC_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpmac_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_ATTR, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPMAC_RSP_GET_ATTRIBUTES(cmd, attr); ++ ++ return 0; ++} ++ ++int dpmac_mdio_read(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_mdio_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_MDIO_READ, ++ cmd_flags, ++ token); ++ DPMAC_CMD_MDIO_READ(cmd, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPMAC_RSP_MDIO_READ(cmd, cfg->data); ++ ++ return 0; ++} ++ ++int dpmac_mdio_write(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_mdio_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_MDIO_WRITE, ++ cmd_flags, ++ token); ++ DPMAC_CMD_MDIO_WRITE(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpmac_get_link_cfg(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_link_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err = 0; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_LINK_CFG, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ DPMAC_RSP_GET_LINK_CFG(cmd, cfg); ++ ++ return 0; ++} ++ ++int dpmac_set_link_state(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_link_state *link_state) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_SET_LINK_STATE, ++ cmd_flags, ++ token); ++ DPMAC_CMD_SET_LINK_STATE(cmd, link_state); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpmac_get_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ enum dpmac_counter type, ++ uint64_t *counter) ++{ ++ struct mc_command cmd = { 0 }; ++ int err = 0; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPMAC_CMDID_GET_COUNTER, ++ cmd_flags, ++ token); ++ DPMAC_CMD_GET_COUNTER(cmd, type); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ DPMAC_RSP_GET_COUNTER(cmd, *counter); ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/mac/dpmac.h +@@ -0,0 +1,593 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPMAC_H ++#define __FSL_DPMAC_H ++ ++/* Data Path MAC API ++ * Contains initialization APIs and runtime control APIs for DPMAC ++ */ ++ ++struct fsl_mc_io; ++ ++/** ++ * dpmac_open() - Open a control session for the specified object. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @dpmac_id: DPMAC unique ID ++ * @token: Returned token; use in subsequent API calls ++ * ++ * This function can be used to open a control session for an ++ * already created object; an object may have been declared in ++ * the DPL or by calling the dpmac_create function. ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent commands for ++ * this specific object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpmac_id, ++ uint16_t *token); ++ ++/** ++ * dpmac_close() - Close the control session of the object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * ++ * After this function is called, no further operations are ++ * allowed on the object without opening a new control session. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * enum dpmac_link_type - DPMAC link type ++ * @DPMAC_LINK_TYPE_NONE: No link ++ * @DPMAC_LINK_TYPE_FIXED: Link is fixed type ++ * @DPMAC_LINK_TYPE_PHY: Link by PHY ID ++ * @DPMAC_LINK_TYPE_BACKPLANE: Backplane link type ++ */ ++enum dpmac_link_type { ++ DPMAC_LINK_TYPE_NONE, ++ DPMAC_LINK_TYPE_FIXED, ++ DPMAC_LINK_TYPE_PHY, ++ DPMAC_LINK_TYPE_BACKPLANE ++}; ++ ++/** ++ * enum dpmac_eth_if - DPMAC Ethrnet interface ++ * @DPMAC_ETH_IF_MII: MII interface ++ * @DPMAC_ETH_IF_RMII: RMII interface ++ * @DPMAC_ETH_IF_SMII: SMII interface ++ * @DPMAC_ETH_IF_GMII: GMII interface ++ * @DPMAC_ETH_IF_RGMII: RGMII interface ++ * @DPMAC_ETH_IF_SGMII: SGMII interface ++ * @DPMAC_ETH_IF_QSGMII: QSGMII interface ++ * @DPMAC_ETH_IF_XAUI: XAUI interface ++ * @DPMAC_ETH_IF_XFI: XFI interface ++ */ ++enum dpmac_eth_if { ++ DPMAC_ETH_IF_MII, ++ DPMAC_ETH_IF_RMII, ++ DPMAC_ETH_IF_SMII, ++ DPMAC_ETH_IF_GMII, ++ DPMAC_ETH_IF_RGMII, ++ DPMAC_ETH_IF_SGMII, ++ DPMAC_ETH_IF_QSGMII, ++ DPMAC_ETH_IF_XAUI, ++ DPMAC_ETH_IF_XFI ++}; ++ ++/** ++ * struct dpmac_cfg - Structure representing DPMAC configuration ++ * @mac_id: Represents the Hardware MAC ID; in case of multiple WRIOP, ++ * the MAC IDs are continuous. ++ * For example: 2 WRIOPs, 16 MACs in each: ++ * MAC IDs for the 1st WRIOP: 1-16, ++ * MAC IDs for the 2nd WRIOP: 17-32. ++ */ ++struct dpmac_cfg { ++ int mac_id; ++}; ++ ++/** ++ * dpmac_create() - Create the DPMAC object. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @cfg: Configuration structure ++ * @token: Returned token; use in subsequent API calls ++ * ++ * Create the DPMAC object, allocate required resources and ++ * perform required initialization. ++ * ++ * The object can be created either by declaring it in the ++ * DPL file, or by calling this function. ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent calls to ++ * this specific object. For objects that are created using the ++ * DPL file, call dpmac_open function to get an authentication ++ * token first. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpmac_cfg *cfg, ++ uint16_t *token); ++ ++/** ++ * dpmac_destroy() - Destroy the DPMAC object and release all its resources. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpmac_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * DPMAC IRQ Index and Events ++ */ ++ ++/** ++ * IRQ index ++ */ ++#define DPMAC_IRQ_INDEX 0 ++/** ++ * IRQ event - indicates a change in link state ++ */ ++#define DPMAC_IRQ_EVENT_LINK_CFG_REQ 0x00000001 ++/** ++ * IRQ event - Indicates that the link state changed ++ */ ++#define DPMAC_IRQ_EVENT_LINK_CHANGED 0x00000002 ++ ++/** ++ * struct dpmac_irq_cfg - IRQ configuration ++ * @addr: Address that must be written to signal a message-based interrupt ++ * @val: Value to write into irq_addr address ++ * @irq_num: A user defined number associated with this IRQ ++ */ ++struct dpmac_irq_cfg { ++ uint64_t addr; ++ uint32_t val; ++ int irq_num; ++}; ++ ++/** ++ * dpmac_set_irq() - Set IRQ information for the DPMAC to trigger an interrupt. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @irq_index: Identifies the interrupt index to configure ++ * @irq_cfg: IRQ configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpmac_irq_cfg *irq_cfg); ++ ++/** ++ * dpmac_get_irq() - Get IRQ information from the DPMAC. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @irq_index: The interrupt index to configure ++ * @type: Interrupt type: 0 represents message interrupt ++ * type (both irq_addr and irq_val are valid) ++ * @irq_cfg: IRQ attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpmac_irq_cfg *irq_cfg); ++ ++/** ++ * dpmac_set_irq_enable() - Set overall interrupt state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @irq_index: The interrupt index to configure ++ * @en: Interrupt state - enable = 1, disable = 0 ++ * ++ * Allows GPP software to control when interrupts are generated. ++ * Each interrupt can have up to 32 causes. The enable/disable control's the ++ * overall interrupt state. if the interrupt is disabled no causes will cause ++ * an interrupt. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en); ++ ++/** ++ * dpmac_get_irq_enable() - Get overall interrupt state ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @irq_index: The interrupt index to configure ++ * @en: Returned interrupt state - enable = 1, disable = 0 ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en); ++ ++/** ++ * dpmac_set_irq_mask() - Set interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @irq_index: The interrupt index to configure ++ * @mask: Event mask to trigger interrupt; ++ * each bit: ++ * 0 = ignore event ++ * 1 = consider event for asserting IRQ ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask); ++ ++/** ++ * dpmac_get_irq_mask() - Get interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @irq_index: The interrupt index to configure ++ * @mask: Returned event mask to trigger interrupt ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask); ++ ++/** ++ * dpmac_get_irq_status() - Get the current status of any pending interrupts. ++ * ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @irq_index: The interrupt index to configure ++ * @status: Returned interrupts status - one bit per cause: ++ * 0 = no interrupt pending ++ * 1 = interrupt pending ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status); ++ ++/** ++ * dpmac_clear_irq_status() - Clear a pending interrupt's status ++ * ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @irq_index: The interrupt index to configure ++ * @status: Bits to clear (W1C) - one bit per cause: ++ * 0 = don't change ++ * 1 = clear status bit ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status); ++ ++/** ++ * struct dpmac_attr - Structure representing DPMAC attributes ++ * @id: DPMAC object ID ++ * @phy_id: PHY ID ++ * @link_type: link type ++ * @eth_if: Ethernet interface ++ * @max_rate: Maximum supported rate - in Mbps ++ * @version: DPMAC version ++ */ ++struct dpmac_attr { ++ int id; ++ int phy_id; ++ enum dpmac_link_type link_type; ++ enum dpmac_eth_if eth_if; ++ uint32_t max_rate; ++ /** ++ * struct version - Structure representing DPMAC version ++ * @major: DPMAC major version ++ * @minor: DPMAC minor version ++ */ ++ struct { ++ uint16_t major; ++ uint16_t minor; ++ } version; ++}; ++ ++/** ++ * dpmac_get_attributes - Retrieve DPMAC attributes. ++ * ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @attr: Returned object's attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_attr *attr); ++ ++/** ++ * struct dpmac_mdio_cfg - DPMAC MDIO read/write parameters ++ * @phy_addr: MDIO device address ++ * @reg: Address of the register within the Clause 45 PHY device from which data ++ * is to be read ++ * @data: Data read/write from/to MDIO ++ */ ++struct dpmac_mdio_cfg { ++ uint8_t phy_addr; ++ uint8_t reg; ++ uint16_t data; ++}; ++ ++/** ++ * dpmac_mdio_read() - Perform MDIO read transaction ++ * @mc_io: Pointer to opaque I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @cfg: Structure with MDIO transaction parameters ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_mdio_read(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_mdio_cfg *cfg); ++ ++/** ++ * dpmac_mdio_write() - Perform MDIO write transaction ++ * @mc_io: Pointer to opaque I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @cfg: Structure with MDIO transaction parameters ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_mdio_write(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_mdio_cfg *cfg); ++ ++/** ++ * DPMAC link configuration/state options ++ */ ++ ++/** ++ * Enable auto-negotiation ++ */ ++#define DPMAC_LINK_OPT_AUTONEG 0x0000000000000001ULL ++/** ++ * Enable half-duplex mode ++ */ ++#define DPMAC_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL ++/** ++ * Enable pause frames ++ */ ++#define DPMAC_LINK_OPT_PAUSE 0x0000000000000004ULL ++/** ++ * Enable a-symmetric pause frames ++ */ ++#define DPMAC_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL ++ ++/** ++ * struct dpmac_link_cfg - Structure representing DPMAC link configuration ++ * @rate: Link's rate - in Mbps ++ * @options: Enable/Disable DPMAC link cfg features (bitmap) ++ */ ++struct dpmac_link_cfg { ++ uint32_t rate; ++ uint64_t options; ++}; ++ ++/** ++ * dpmac_get_link_cfg() - Get Ethernet link configuration ++ * @mc_io: Pointer to opaque I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @cfg: Returned structure with the link configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_get_link_cfg(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_link_cfg *cfg); ++ ++/** ++ * struct dpmac_link_state - DPMAC link configuration request ++ * @rate: Rate in Mbps ++ * @options: Enable/Disable DPMAC link cfg features (bitmap) ++ * @up: Link state ++ */ ++struct dpmac_link_state { ++ uint32_t rate; ++ uint64_t options; ++ int up; ++}; ++ ++/** ++ * dpmac_set_link_state() - Set the Ethernet link status ++ * @mc_io: Pointer to opaque I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @link_state: Link state configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpmac_set_link_state(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpmac_link_state *link_state); ++ ++/** ++ * enum dpmac_counter - DPMAC counter types ++ * @DPMAC_CNT_ING_FRAME_64: counts 64-bytes frames, good or bad. ++ * @DPMAC_CNT_ING_FRAME_127: counts 65- to 127-bytes frames, good or bad. ++ * @DPMAC_CNT_ING_FRAME_255: counts 128- to 255-bytes frames, good or bad. ++ * @DPMAC_CNT_ING_FRAME_511: counts 256- to 511-bytes frames, good or bad. ++ * @DPMAC_CNT_ING_FRAME_1023: counts 512- to 1023-bytes frames, good or bad. ++ * @DPMAC_CNT_ING_FRAME_1518: counts 1024- to 1518-bytes frames, good or bad. ++ * @DPMAC_CNT_ING_FRAME_1519_MAX: counts 1519-bytes frames and larger ++ * (up to max frame length specified), ++ * good or bad. ++ * @DPMAC_CNT_ING_FRAG: counts frames which are shorter than 64 bytes received ++ * with a wrong CRC ++ * @DPMAC_CNT_ING_JABBER: counts frames longer than the maximum frame length ++ * specified, with a bad frame check sequence. ++ * @DPMAC_CNT_ING_FRAME_DISCARD: counts dropped frames due to internal errors. ++ * Occurs when a receive FIFO overflows. ++ * Includes also frames truncated as a result of ++ * the receive FIFO overflow. ++ * @DPMAC_CNT_ING_ALIGN_ERR: counts frames with an alignment error ++ * (optional used for wrong SFD). ++ * @DPMAC_CNT_EGR_UNDERSIZED: counts frames transmitted that was less than 64 ++ * bytes long with a good CRC. ++ * @DPMAC_CNT_ING_OVERSIZED: counts frames longer than the maximum frame length ++ * specified, with a good frame check sequence. ++ * @DPMAC_CNT_ING_VALID_PAUSE_FRAME: counts valid pause frames (regular and PFC) ++ * @DPMAC_CNT_EGR_VALID_PAUSE_FRAME: counts valid pause frames transmitted ++ * (regular and PFC). ++ * @DPMAC_CNT_ING_BYTE: counts bytes received except preamble for all valid ++ * frames and valid pause frames. ++ * @DPMAC_CNT_ING_MCAST_FRAME: counts received multicast frames. ++ * @DPMAC_CNT_ING_BCAST_FRAME: counts received broadcast frames. ++ * @DPMAC_CNT_ING_ALL_FRAME: counts each good or bad frames received. ++ * @DPMAC_CNT_ING_UCAST_FRAME: counts received unicast frames. ++ * @DPMAC_CNT_ING_ERR_FRAME: counts frames received with an error ++ * (except for undersized/fragment frame). ++ * @DPMAC_CNT_EGR_BYTE: counts bytes transmitted except preamble for all valid ++ * frames and valid pause frames transmitted. ++ * @DPMAC_CNT_EGR_MCAST_FRAME: counts transmitted multicast frames. ++ * @DPMAC_CNT_EGR_BCAST_FRAME: counts transmitted broadcast frames. ++ * @DPMAC_CNT_EGR_UCAST_FRAME: counts transmitted unicast frames. ++ * @DPMAC_CNT_EGR_ERR_FRAME: counts frames transmitted with an error. ++ * @DPMAC_CNT_ING_GOOD_FRAME: counts frames received without error, including ++ * pause frames. ++ * @DPMAC_CNT_ENG_GOOD_FRAME: counts frames transmitted without error, including ++ * pause frames. ++ */ ++enum dpmac_counter { ++ DPMAC_CNT_ING_FRAME_64, ++ DPMAC_CNT_ING_FRAME_127, ++ DPMAC_CNT_ING_FRAME_255, ++ DPMAC_CNT_ING_FRAME_511, ++ DPMAC_CNT_ING_FRAME_1023, ++ DPMAC_CNT_ING_FRAME_1518, ++ DPMAC_CNT_ING_FRAME_1519_MAX, ++ DPMAC_CNT_ING_FRAG, ++ DPMAC_CNT_ING_JABBER, ++ DPMAC_CNT_ING_FRAME_DISCARD, ++ DPMAC_CNT_ING_ALIGN_ERR, ++ DPMAC_CNT_EGR_UNDERSIZED, ++ DPMAC_CNT_ING_OVERSIZED, ++ DPMAC_CNT_ING_VALID_PAUSE_FRAME, ++ DPMAC_CNT_EGR_VALID_PAUSE_FRAME, ++ DPMAC_CNT_ING_BYTE, ++ DPMAC_CNT_ING_MCAST_FRAME, ++ DPMAC_CNT_ING_BCAST_FRAME, ++ DPMAC_CNT_ING_ALL_FRAME, ++ DPMAC_CNT_ING_UCAST_FRAME, ++ DPMAC_CNT_ING_ERR_FRAME, ++ DPMAC_CNT_EGR_BYTE, ++ DPMAC_CNT_EGR_MCAST_FRAME, ++ DPMAC_CNT_EGR_BCAST_FRAME, ++ DPMAC_CNT_EGR_UCAST_FRAME, ++ DPMAC_CNT_EGR_ERR_FRAME, ++ DPMAC_CNT_ING_GOOD_FRAME, ++ DPMAC_CNT_ENG_GOOD_FRAME ++}; ++ ++/** ++ * dpmac_get_counter() - Read a specific DPMAC counter ++ * @mc_io: Pointer to opaque I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPMAC object ++ * @type: The requested counter ++ * @counter: Returned counter value ++ * ++ * Return: The requested counter; '0' otherwise. ++ */ ++int dpmac_get_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ enum dpmac_counter type, ++ uint64_t *counter); ++ ++#endif /* __FSL_DPMAC_H */ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/mac/mac.c +@@ -0,0 +1,767 @@ ++/* Copyright 2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../../fsl-mc/include/mc.h" ++#include "../../fsl-mc/include/mc-sys.h" ++ ++#include "dpmac.h" ++#include "dpmac-cmd.h" ++ ++#define DPAA2_SUPPORTED_DPMAC_VERSION 3 ++ ++struct dpaa2_mac_priv { ++ struct net_device *netdev; ++ struct fsl_mc_device *mc_dev; ++ struct dpmac_attr attr; ++ struct dpmac_link_state old_state; ++}; ++ ++/* TODO: fix the 10G modes, mapping can't be right: ++ * XGMII is paralel ++ * XAUI is serial, using 8b/10b encoding ++ * XFI is also serial but using 64b/66b encoding ++ * they can't all map to XGMII... ++ * ++ * This must be kept in sync with enum dpmac_eth_if. ++ */ ++static phy_interface_t dpaa2_mac_iface_mode[] = { ++ /* DPMAC_ETH_IF_MII */ ++ PHY_INTERFACE_MODE_MII, ++ /* DPMAC_ETH_IF_RMII */ ++ PHY_INTERFACE_MODE_RMII, ++ /* DPMAC_ETH_IF_SMII */ ++ PHY_INTERFACE_MODE_SMII, ++ /* DPMAC_ETH_IF_GMII */ ++ PHY_INTERFACE_MODE_GMII, ++ /* DPMAC_ETH_IF_RGMII */ ++ PHY_INTERFACE_MODE_RGMII, ++ /* DPMAC_ETH_IF_SGMII */ ++ PHY_INTERFACE_MODE_SGMII, ++ /* DPMAC_ETH_IF_QSGMII */ ++ PHY_INTERFACE_MODE_QSGMII, ++ /* DPMAC_ETH_IF_XAUI */ ++ PHY_INTERFACE_MODE_XGMII, ++ /* DPMAC_ETH_IF_XFI */ ++ PHY_INTERFACE_MODE_XGMII, ++}; ++ ++static void dpaa2_mac_link_changed(struct net_device *netdev) ++{ ++ struct phy_device *phydev; ++ struct dpmac_link_state state = { 0 }; ++ struct dpaa2_mac_priv *priv = netdev_priv(netdev); ++ int err; ++ ++ /* the PHY just notified us of link state change */ ++ phydev = netdev->phydev; ++ ++ state.up = !!phydev->link; ++ if (phydev->link) { ++ state.rate = phydev->speed; ++ ++ if (!phydev->duplex) ++ state.options |= DPMAC_LINK_OPT_HALF_DUPLEX; ++ if (phydev->autoneg) ++ state.options |= DPMAC_LINK_OPT_AUTONEG; ++ ++ netif_carrier_on(netdev); ++ } else { ++ netif_carrier_off(netdev); ++ } ++ ++ if (priv->old_state.up != state.up || ++ priv->old_state.rate != state.rate || ++ priv->old_state.options != state.options) { ++ priv->old_state = state; ++ phy_print_status(phydev); ++ } ++ ++ /* We must call into the MC firmware at all times, because we don't know ++ * when and whether a potential DPNI may have read the link state. ++ */ ++ err = dpmac_set_link_state(priv->mc_dev->mc_io, 0, ++ priv->mc_dev->mc_handle, &state); ++ if (unlikely(err)) ++ dev_err(&priv->mc_dev->dev, "dpmac_set_link_state: %d\n", err); ++} ++ ++/* IRQ bits that we handle */ ++static const u32 dpmac_irq_mask = DPMAC_IRQ_EVENT_LINK_CFG_REQ; ++ ++#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS ++static netdev_tx_t dpaa2_mac_drop_frame(struct sk_buff *skb, ++ struct net_device *dev) ++{ ++ /* we don't support I/O for now, drop the frame */ ++ dev_kfree_skb_any(skb); ++ return NETDEV_TX_OK; ++} ++ ++static int dpaa2_mac_open(struct net_device *netdev) ++{ ++ /* start PHY state machine */ ++ phy_start(netdev->phydev); ++ ++ return 0; ++} ++ ++static int dpaa2_mac_stop(struct net_device *netdev) ++{ ++ if (!netdev->phydev) ++ goto done; ++ ++ /* stop PHY state machine */ ++ phy_stop(netdev->phydev); ++ ++ /* signal link down to firmware */ ++ netdev->phydev->link = 0; ++ dpaa2_mac_link_changed(netdev); ++ ++done: ++ return 0; ++} ++ ++static int dpaa2_mac_get_settings(struct net_device *netdev, ++ struct ethtool_cmd *cmd) ++{ ++ return phy_ethtool_gset(netdev->phydev, cmd); ++} ++ ++static int dpaa2_mac_set_settings(struct net_device *netdev, ++ struct ethtool_cmd *cmd) ++{ ++ return phy_ethtool_sset(netdev->phydev, cmd); ++} ++ ++static struct rtnl_link_stats64 ++*dpaa2_mac_get_stats(struct net_device *netdev, ++ struct rtnl_link_stats64 *storage) ++{ ++ struct dpaa2_mac_priv *priv = netdev_priv(netdev); ++ u64 tmp; ++ int err; ++ ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_EGR_MCAST_FRAME, ++ &storage->tx_packets); ++ if (err) ++ goto error; ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_EGR_BCAST_FRAME, &tmp); ++ if (err) ++ goto error; ++ storage->tx_packets += tmp; ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_EGR_UCAST_FRAME, &tmp); ++ if (err) ++ goto error; ++ storage->tx_packets += tmp; ++ ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_EGR_UNDERSIZED, &storage->tx_dropped); ++ if (err) ++ goto error; ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_EGR_BYTE, &storage->tx_bytes); ++ if (err) ++ goto error; ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_EGR_ERR_FRAME, &storage->tx_errors); ++ if (err) ++ goto error; ++ ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_ING_ALL_FRAME, &storage->rx_packets); ++ if (err) ++ goto error; ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_ING_MCAST_FRAME, &storage->multicast); ++ if (err) ++ goto error; ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_ING_FRAME_DISCARD, ++ &storage->rx_dropped); ++ if (err) ++ goto error; ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_ING_ALIGN_ERR, &storage->rx_errors); ++ if (err) ++ goto error; ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_ING_OVERSIZED, &tmp); ++ if (err) ++ goto error; ++ storage->rx_errors += tmp; ++ err = dpmac_get_counter(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle, ++ DPMAC_CNT_ING_BYTE, &storage->rx_bytes); ++ if (err) ++ goto error; ++ ++ return storage; ++ ++error: ++ netdev_err(netdev, "dpmac_get_counter err %d\n", err); ++ return storage; ++} ++ ++static struct { ++ enum dpmac_counter id; ++ char name[ETH_GSTRING_LEN]; ++} dpaa2_mac_counters[] = { ++ {DPMAC_CNT_ING_ALL_FRAME, "rx all frames"}, ++ {DPMAC_CNT_ING_GOOD_FRAME, "rx frames ok"}, ++ {DPMAC_CNT_ING_ERR_FRAME, "rx frame errors"}, ++ {DPMAC_CNT_ING_FRAME_DISCARD, "rx frame discards"}, ++ {DPMAC_CNT_ING_UCAST_FRAME, "rx u-cast"}, ++ {DPMAC_CNT_ING_BCAST_FRAME, "rx b-cast"}, ++ {DPMAC_CNT_ING_MCAST_FRAME, "rx m-cast"}, ++ {DPMAC_CNT_ING_FRAME_64, "rx 64 bytes"}, ++ {DPMAC_CNT_ING_FRAME_127, "rx 65-127 bytes"}, ++ {DPMAC_CNT_ING_FRAME_255, "rx 128-255 bytes"}, ++ {DPMAC_CNT_ING_FRAME_511, "rx 256-511 bytes"}, ++ {DPMAC_CNT_ING_FRAME_1023, "rx 512-1023 bytes"}, ++ {DPMAC_CNT_ING_FRAME_1518, "rx 1024-1518 bytes"}, ++ {DPMAC_CNT_ING_FRAME_1519_MAX, "rx 1519-max bytes"}, ++ {DPMAC_CNT_ING_FRAG, "rx frags"}, ++ {DPMAC_CNT_ING_JABBER, "rx jabber"}, ++ {DPMAC_CNT_ING_ALIGN_ERR, "rx align errors"}, ++ {DPMAC_CNT_ING_OVERSIZED, "rx oversized"}, ++ {DPMAC_CNT_ING_VALID_PAUSE_FRAME, "rx pause"}, ++ {DPMAC_CNT_ING_BYTE, "rx bytes"}, ++ {DPMAC_CNT_ENG_GOOD_FRAME, "tx frames ok"}, ++ {DPMAC_CNT_EGR_UCAST_FRAME, "tx u-cast"}, ++ {DPMAC_CNT_EGR_MCAST_FRAME, "tx m-cast"}, ++ {DPMAC_CNT_EGR_BCAST_FRAME, "tx b-cast"}, ++ {DPMAC_CNT_EGR_ERR_FRAME, "tx frame errors"}, ++ {DPMAC_CNT_EGR_UNDERSIZED, "tx undersized"}, ++ {DPMAC_CNT_EGR_VALID_PAUSE_FRAME, "tx b-pause"}, ++ {DPMAC_CNT_EGR_BYTE, "tx bytes"}, ++ ++}; ++ ++static void dpaa2_mac_get_strings(struct net_device *netdev, ++ u32 stringset, u8 *data) ++{ ++ int i; ++ ++ switch (stringset) { ++ case ETH_SS_STATS: ++ for (i = 0; i < ARRAY_SIZE(dpaa2_mac_counters); i++) ++ memcpy(data + i * ETH_GSTRING_LEN, ++ dpaa2_mac_counters[i].name, ++ ETH_GSTRING_LEN); ++ break; ++ } ++} ++ ++static void dpaa2_mac_get_ethtool_stats(struct net_device *netdev, ++ struct ethtool_stats *stats, ++ u64 *data) ++{ ++ struct dpaa2_mac_priv *priv = netdev_priv(netdev); ++ int i; ++ int err; ++ ++ for (i = 0; i < ARRAY_SIZE(dpaa2_mac_counters); i++) { ++ err = dpmac_get_counter(priv->mc_dev->mc_io, ++ 0, ++ priv->mc_dev->mc_handle, ++ dpaa2_mac_counters[i].id, &data[i]); ++ if (err) ++ netdev_err(netdev, "dpmac_get_counter[%s] err %d\n", ++ dpaa2_mac_counters[i].name, err); ++ } ++} ++ ++static int dpaa2_mac_get_sset_count(struct net_device *dev, int sset) ++{ ++ switch (sset) { ++ case ETH_SS_STATS: ++ return ARRAY_SIZE(dpaa2_mac_counters); ++ default: ++ return -EOPNOTSUPP; ++ } ++} ++ ++static const struct net_device_ops dpaa2_mac_ndo_ops = { ++ .ndo_start_xmit = &dpaa2_mac_drop_frame, ++ .ndo_open = &dpaa2_mac_open, ++ .ndo_stop = &dpaa2_mac_stop, ++ .ndo_get_stats64 = &dpaa2_mac_get_stats, ++}; ++ ++static const struct ethtool_ops dpaa2_mac_ethtool_ops = { ++ .get_settings = &dpaa2_mac_get_settings, ++ .set_settings = &dpaa2_mac_set_settings, ++ .get_strings = &dpaa2_mac_get_strings, ++ .get_ethtool_stats = &dpaa2_mac_get_ethtool_stats, ++ .get_sset_count = &dpaa2_mac_get_sset_count, ++}; ++#endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */ ++ ++static int configure_link(struct dpaa2_mac_priv *priv, ++ struct dpmac_link_cfg *cfg) ++{ ++ struct phy_device *phydev = priv->netdev->phydev; ++ ++ if (!phydev) { ++ dev_warn(priv->netdev->dev.parent, ++ "asked to change PHY settings but PHY ref is NULL, ignoring\n"); ++ return 0; ++ } ++ ++ phydev->speed = cfg->rate; ++ phydev->duplex = !!(cfg->options & DPMAC_LINK_OPT_HALF_DUPLEX); ++ ++ if (cfg->options & DPMAC_LINK_OPT_AUTONEG) { ++ phydev->autoneg = 1; ++ phydev->advertising |= ADVERTISED_Autoneg; ++ } else { ++ phydev->autoneg = 0; ++ phydev->advertising &= ~ADVERTISED_Autoneg; ++ } ++ ++ phy_start_aneg(phydev); ++ ++ return 0; ++} ++ ++static irqreturn_t dpaa2_mac_irq_handler(int irq_num, void *arg) ++{ ++ struct device *dev = (struct device *)arg; ++ struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); ++ struct dpaa2_mac_priv *priv = dev_get_drvdata(dev); ++ struct dpmac_link_cfg link_cfg; ++ u8 irq_index = DPMAC_IRQ_INDEX; ++ u32 status, clear = 0; ++ int err; ++ ++ if (mc_dev->irqs[0]->msi_desc->irq != irq_num) { ++ dev_err(dev, "received unexpected interrupt %d!\n", irq_num); ++ goto err; ++ } ++ ++ err = dpmac_get_irq_status(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ irq_index, &status); ++ if (err) { ++ dev_err(dev, "dpmac_get_irq_status err %d\n", err); ++ clear = ~0x0u; ++ goto out; ++ } ++ ++ /* DPNI-initiated link configuration; 'ifconfig up' also calls this */ ++ if (status & DPMAC_IRQ_EVENT_LINK_CFG_REQ) { ++ dev_dbg(dev, "DPMAC IRQ %d - LINK_CFG_REQ\n", irq_num); ++ clear |= DPMAC_IRQ_EVENT_LINK_CFG_REQ; ++ ++ err = dpmac_get_link_cfg(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ &link_cfg); ++ if (err) { ++ dev_err(dev, "dpmac_get_link_cfg err %d\n", err); ++ goto out; ++ } ++ ++ err = configure_link(priv, &link_cfg); ++ if (err) { ++ dev_err(dev, "cannot configure link\n"); ++ goto out; ++ } ++ } ++ ++out: ++ err = dpmac_clear_irq_status(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ irq_index, clear); ++ if (err < 0) ++ dev_err(&mc_dev->dev, "dpmac_clear_irq_status() err %d\n", err); ++ ++ return IRQ_HANDLED; ++ ++err: ++ dev_warn(dev, "DPMAC IRQ %d was not handled!\n", irq_num); ++ return IRQ_NONE; ++} ++ ++static int setup_irqs(struct fsl_mc_device *mc_dev) ++{ ++ int err; ++ ++ err = fsl_mc_allocate_irqs(mc_dev); ++ if (err) { ++ dev_err(&mc_dev->dev, "fsl_mc_allocate_irqs err %d\n", err); ++ return err; ++ } ++ ++ err = dpmac_set_irq_mask(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ DPMAC_IRQ_INDEX, dpmac_irq_mask); ++ if (err < 0) { ++ dev_err(&mc_dev->dev, "dpmac_set_irq_mask err %d\n", err); ++ goto free_irq; ++ } ++ err = dpmac_set_irq_enable(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ DPMAC_IRQ_INDEX, 0); ++ if (err) { ++ dev_err(&mc_dev->dev, "dpmac_set_irq_enable err %d\n", err); ++ goto free_irq; ++ } ++ ++ err = devm_request_threaded_irq(&mc_dev->dev, ++ mc_dev->irqs[0]->msi_desc->irq, ++ NULL, &dpaa2_mac_irq_handler, ++ IRQF_NO_SUSPEND | IRQF_ONESHOT, ++ dev_name(&mc_dev->dev), &mc_dev->dev); ++ if (err) { ++ dev_err(&mc_dev->dev, "devm_request_threaded_irq err %d\n", ++ err); ++ goto free_irq; ++ } ++ ++ err = dpmac_set_irq_mask(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ DPMAC_IRQ_INDEX, dpmac_irq_mask); ++ if (err < 0) { ++ dev_err(&mc_dev->dev, "dpmac_set_irq_mask err %d\n", err); ++ goto free_irq; ++ } ++ err = dpmac_set_irq_enable(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ DPMAC_IRQ_INDEX, 1); ++ if (err) { ++ dev_err(&mc_dev->dev, "dpmac_set_irq_enable err %d\n", err); ++ goto unregister_irq; ++ } ++ ++ return 0; ++ ++unregister_irq: ++ devm_free_irq(&mc_dev->dev, mc_dev->irqs[0]->msi_desc->irq, &mc_dev->dev); ++free_irq: ++ fsl_mc_free_irqs(mc_dev); ++ ++ return err; ++} ++ ++static void teardown_irqs(struct fsl_mc_device *mc_dev) ++{ ++ int err; ++ ++ err = dpmac_set_irq_mask(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ DPMAC_IRQ_INDEX, dpmac_irq_mask); ++ if (err < 0) ++ dev_err(&mc_dev->dev, "dpmac_set_irq_mask err %d\n", err); ++ ++ err = dpmac_set_irq_enable(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ DPMAC_IRQ_INDEX, 0); ++ if (err < 0) ++ dev_err(&mc_dev->dev, "dpmac_set_irq_enable err %d\n", err); ++ ++ devm_free_irq(&mc_dev->dev, mc_dev->irqs[0]->msi_desc->irq, &mc_dev->dev); ++ fsl_mc_free_irqs(mc_dev); ++} ++ ++static struct device_node *lookup_node(struct device *dev, int dpmac_id) ++{ ++ struct device_node *dpmacs, *dpmac = NULL; ++ struct device_node *mc_node = dev->of_node; ++ const void *id; ++ int lenp; ++ int dpmac_id_be32 = cpu_to_be32(dpmac_id); ++ ++ dpmacs = of_find_node_by_name(mc_node, "dpmacs"); ++ if (!dpmacs) { ++ dev_err(dev, "No dpmacs subnode in device-tree\n"); ++ return NULL; ++ } ++ ++ while ((dpmac = of_get_next_child(dpmacs, dpmac))) { ++ id = of_get_property(dpmac, "reg", &lenp); ++ if (!id || lenp != sizeof(int)) { ++ dev_warn(dev, "Unsuitable reg property in dpmac node\n"); ++ continue; ++ } ++ if (*(int *)id == dpmac_id_be32) ++ return dpmac; ++ } ++ ++ return NULL; ++} ++ ++static int check_dpmac_version(struct dpaa2_mac_priv *priv) ++{ ++ struct device *dev = &priv->mc_dev->dev; ++ int mc_version = priv->attr.version.major; ++ ++ /* Check that the FLIB-defined version matches the one reported by MC */ ++ if (mc_version != DPMAC_VER_MAJOR) { ++ dev_err(dev, "DPMAC FLIB version mismatch: MC says %d, we have %d\n", ++ mc_version, DPMAC_VER_MAJOR); ++ return -EINVAL; ++ } ++ ++ /* ... and that we actually support it */ ++ if (mc_version < DPAA2_SUPPORTED_DPMAC_VERSION) { ++ dev_err(dev, "Unsupported DPMAC FLIB version (%d)\n", ++ mc_version); ++ return -EINVAL; ++ } ++ ++ dev_dbg(dev, "Using DPMAC FLIB version %d\n", mc_version); ++ ++ return 0; ++} ++ ++static int dpaa2_mac_probe(struct fsl_mc_device *mc_dev) ++{ ++ struct device *dev; ++ struct dpaa2_mac_priv *priv = NULL; ++ struct device_node *phy_node, *dpmac_node; ++ struct net_device *netdev; ++ phy_interface_t if_mode; ++ int err = 0; ++ ++ /* just being completely paranoid */ ++ if (!mc_dev) ++ return -EFAULT; ++ dev = &mc_dev->dev; ++ ++ /* prepare a net_dev structure to make the phy lib API happy */ ++ netdev = alloc_etherdev(sizeof(*priv)); ++ if (!netdev) { ++ dev_err(dev, "alloc_etherdev error\n"); ++ err = -ENOMEM; ++ goto err_exit; ++ } ++ priv = netdev_priv(netdev); ++ priv->mc_dev = mc_dev; ++ priv->netdev = netdev; ++ ++ SET_NETDEV_DEV(netdev, dev); ++ snprintf(netdev->name, IFNAMSIZ, "mac%d", mc_dev->obj_desc.id); ++ ++ dev_set_drvdata(dev, priv); ++ ++ err = fsl_mc_portal_allocate(mc_dev, 0, &mc_dev->mc_io); ++ if (err || !mc_dev->mc_io) { ++ dev_err(dev, "fsl_mc_portal_allocate error: %d\n", err); ++ err = -ENODEV; ++ goto err_free_netdev; ++ } ++ ++ err = dpmac_open(mc_dev->mc_io, 0, mc_dev->obj_desc.id, ++ &mc_dev->mc_handle); ++ if (err || !mc_dev->mc_handle) { ++ dev_err(dev, "dpmac_open error: %d\n", err); ++ err = -ENODEV; ++ goto err_free_mcp; ++ } ++ ++ err = dpmac_get_attributes(mc_dev->mc_io, 0, ++ mc_dev->mc_handle, &priv->attr); ++ if (err) { ++ dev_err(dev, "dpmac_get_attributes err %d\n", err); ++ err = -EINVAL; ++ goto err_close; ++ } ++ ++ err = check_dpmac_version(priv); ++ if (err) ++ goto err_close; ++ ++ /* Look up the DPMAC node in the device-tree. */ ++ dpmac_node = lookup_node(dev, priv->attr.id); ++ if (!dpmac_node) { ++ dev_err(dev, "No dpmac@%d subnode found.\n", priv->attr.id); ++ err = -ENODEV; ++ goto err_close; ++ } ++ ++ err = setup_irqs(mc_dev); ++ if (err) { ++ err = -EFAULT; ++ goto err_close; ++ } ++ ++#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS ++ /* OPTIONAL, register netdev just to make it visible to the user */ ++ netdev->netdev_ops = &dpaa2_mac_ndo_ops; ++ netdev->ethtool_ops = &dpaa2_mac_ethtool_ops; ++ ++ /* phy starts up enabled so netdev should be up too */ ++ netdev->flags |= IFF_UP; ++ ++ err = register_netdev(priv->netdev); ++ if (err < 0) { ++ dev_err(dev, "register_netdev error %d\n", err); ++ err = -ENODEV; ++ goto err_free_irq; ++ } ++#endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */ ++ ++ /* probe the PHY as a fixed-link if the link type declared in DPC ++ * explicitly mandates this ++ */ ++ if (priv->attr.link_type == DPMAC_LINK_TYPE_FIXED) ++ goto probe_fixed_link; ++ ++ if (priv->attr.eth_if < ARRAY_SIZE(dpaa2_mac_iface_mode)) { ++ if_mode = dpaa2_mac_iface_mode[priv->attr.eth_if]; ++ dev_dbg(dev, "\tusing if mode %s for eth_if %d\n", ++ phy_modes(if_mode), priv->attr.eth_if); ++ } else { ++ dev_warn(dev, "Unexpected interface mode %d, will probe as fixed link\n", ++ priv->attr.eth_if); ++ goto probe_fixed_link; ++ } ++ ++ /* try to connect to the PHY */ ++ phy_node = of_parse_phandle(dpmac_node, "phy-handle", 0); ++ if (!phy_node) { ++ if (!phy_node) { ++ dev_err(dev, "dpmac node has no phy-handle property\n"); ++ err = -ENODEV; ++ goto err_no_phy; ++ } ++ } ++ netdev->phydev = of_phy_connect(netdev, phy_node, ++ &dpaa2_mac_link_changed, 0, if_mode); ++ if (!netdev->phydev) { ++ /* No need for dev_err(); the kernel's loud enough as it is. */ ++ dev_dbg(dev, "Can't of_phy_connect() now.\n"); ++ /* We might be waiting for the MDIO MUX to probe, so defer ++ * our own probing. ++ */ ++ err = -EPROBE_DEFER; ++ goto err_defer; ++ } ++ dev_info(dev, "Connected to %s PHY.\n", phy_modes(if_mode)); ++ ++probe_fixed_link: ++ if (!netdev->phydev) { ++ struct fixed_phy_status status = { ++ .link = 1, ++ /* fixed-phys don't support 10Gbps speed for now */ ++ .speed = 1000, ++ .duplex = 1, ++ }; ++ ++ /* try to register a fixed link phy */ ++ netdev->phydev = fixed_phy_register(PHY_POLL, &status, -1, NULL); ++ if (!netdev->phydev || IS_ERR(netdev->phydev)) { ++ dev_err(dev, "error trying to register fixed PHY\n"); ++ /* So we don't crash unregister_netdev() later on */ ++ netdev->phydev = NULL; ++ err = -EFAULT; ++ goto err_no_phy; ++ } ++ dev_info(dev, "Registered fixed PHY.\n"); ++ } ++ ++ /* start PHY state machine */ ++#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS ++ dpaa2_mac_open(netdev); ++#else /* CONFIG_FSL_DPAA2_MAC_NETDEVS */ ++ phy_start(netdev->phydev); ++#endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */ ++ return 0; ++ ++err_defer: ++err_no_phy: ++#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS ++ unregister_netdev(netdev); ++err_free_irq: ++#endif ++ teardown_irqs(mc_dev); ++err_close: ++ dpmac_close(mc_dev->mc_io, 0, mc_dev->mc_handle); ++err_free_mcp: ++ fsl_mc_portal_free(mc_dev->mc_io); ++err_free_netdev: ++ free_netdev(netdev); ++err_exit: ++ return err; ++} ++ ++static int dpaa2_mac_remove(struct fsl_mc_device *mc_dev) ++{ ++ struct device *dev = &mc_dev->dev; ++ struct dpaa2_mac_priv *priv = dev_get_drvdata(dev); ++ ++ unregister_netdev(priv->netdev); ++ teardown_irqs(priv->mc_dev); ++ dpmac_close(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle); ++ fsl_mc_portal_free(priv->mc_dev->mc_io); ++ free_netdev(priv->netdev); ++ ++ dev_set_drvdata(dev, NULL); ++ kfree(priv); ++ ++ return 0; ++} ++ ++static const struct fsl_mc_device_match_id dpaa2_mac_match_id_table[] = { ++ { ++ .vendor = FSL_MC_VENDOR_FREESCALE, ++ .obj_type = "dpmac", ++ .ver_major = DPMAC_VER_MAJOR, ++ .ver_minor = DPMAC_VER_MINOR, ++ }, ++ {} ++}; ++ ++static struct fsl_mc_driver dpaa2_mac_drv = { ++ .driver = { ++ .name = KBUILD_MODNAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = dpaa2_mac_probe, ++ .remove = dpaa2_mac_remove, ++ .match_id_table = dpaa2_mac_match_id_table, ++}; ++ ++module_fsl_mc_driver(dpaa2_mac_drv); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("DPAA2 PHY proxy interface driver"); diff --git a/target/linux/layerscape/patches-4.4/7209-staging-fsl-dpaa2-mac-Interrupt-code-cleanup.patch b/target/linux/layerscape/patches-4.4/7209-staging-fsl-dpaa2-mac-Interrupt-code-cleanup.patch new file mode 100644 index 0000000000..9ed721f7fa --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7209-staging-fsl-dpaa2-mac-Interrupt-code-cleanup.patch @@ -0,0 +1,182 @@ +From bb42890533f9592e8d30654b4e0b19c3cf7caaec Mon Sep 17 00:00:00 2001 +From: Ioana Radulescu +Date: Fri, 1 Apr 2016 18:38:18 +0300 +Subject: [PATCH 209/226] staging: fsl-dpaa2/mac: Interrupt code cleanup + +Cleanup and a couple of minor fixes for the interrupt +handling code: +* Removed a few unnecessary checks, unify format for others +* Don't print error/debug messages in interrupt handler +* No need to explicitly disable DPMAC interrupts before +configuring them +* Use unlikely in interrupt handler routine error checks +* if status register is zero or we're unable to read its value, +return IRQ_NONE instead of IRQ_HANDLED +* always clear the entire status register, not just the bit(s) +that were treated + +Signed-off-by: Ioana Radulescu +(cherry picked from commit 4b46eec16c56e4f453ca1558af9aceaf6ffe831a) +(Stuart:resolved merge conflict) +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/mac/mac.c | 77 ++++++++--------------------------- + 1 file changed, 16 insertions(+), 61 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/mac/mac.c ++++ b/drivers/staging/fsl-dpaa2/mac/mac.c +@@ -132,7 +132,7 @@ static void dpaa2_mac_link_changed(struc + } + + /* IRQ bits that we handle */ +-static const u32 dpmac_irq_mask = DPMAC_IRQ_EVENT_LINK_CFG_REQ; ++static const u32 dpmac_irq_mask = DPMAC_IRQ_EVENT_LINK_CFG_REQ; + + #ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS + static netdev_tx_t dpaa2_mac_drop_frame(struct sk_buff *skb, +@@ -345,16 +345,13 @@ static const struct ethtool_ops dpaa2_ma + }; + #endif /* CONFIG_FSL_DPAA2_MAC_NETDEVS */ + +-static int configure_link(struct dpaa2_mac_priv *priv, +- struct dpmac_link_cfg *cfg) ++static void configure_link(struct dpaa2_mac_priv *priv, ++ struct dpmac_link_cfg *cfg) + { + struct phy_device *phydev = priv->netdev->phydev; + +- if (!phydev) { +- dev_warn(priv->netdev->dev.parent, +- "asked to change PHY settings but PHY ref is NULL, ignoring\n"); +- return 0; +- } ++ if (unlikely(!phydev)) ++ return; + + phydev->speed = cfg->rate; + phydev->duplex = !!(cfg->options & DPMAC_LINK_OPT_HALF_DUPLEX); +@@ -368,8 +365,6 @@ static int configure_link(struct dpaa2_m + } + + phy_start_aneg(phydev); +- +- return 0; + } + + static irqreturn_t dpaa2_mac_irq_handler(int irq_num, void *arg) +@@ -378,53 +373,29 @@ static irqreturn_t dpaa2_mac_irq_handler + struct fsl_mc_device *mc_dev = to_fsl_mc_device(dev); + struct dpaa2_mac_priv *priv = dev_get_drvdata(dev); + struct dpmac_link_cfg link_cfg; +- u8 irq_index = DPMAC_IRQ_INDEX; +- u32 status, clear = 0; ++ u32 status; + int err; + +- if (mc_dev->irqs[0]->msi_desc->irq != irq_num) { +- dev_err(dev, "received unexpected interrupt %d!\n", irq_num); +- goto err; +- } +- + err = dpmac_get_irq_status(mc_dev->mc_io, 0, mc_dev->mc_handle, +- irq_index, &status); +- if (err) { +- dev_err(dev, "dpmac_get_irq_status err %d\n", err); +- clear = ~0x0u; +- goto out; +- } ++ DPMAC_IRQ_INDEX, &status); ++ if (unlikely(err || !status)) ++ return IRQ_NONE; + + /* DPNI-initiated link configuration; 'ifconfig up' also calls this */ + if (status & DPMAC_IRQ_EVENT_LINK_CFG_REQ) { +- dev_dbg(dev, "DPMAC IRQ %d - LINK_CFG_REQ\n", irq_num); +- clear |= DPMAC_IRQ_EVENT_LINK_CFG_REQ; +- + err = dpmac_get_link_cfg(mc_dev->mc_io, 0, mc_dev->mc_handle, + &link_cfg); +- if (err) { +- dev_err(dev, "dpmac_get_link_cfg err %d\n", err); ++ if (unlikely(err)) + goto out; +- } + +- err = configure_link(priv, &link_cfg); +- if (err) { +- dev_err(dev, "cannot configure link\n"); +- goto out; +- } ++ configure_link(priv, &link_cfg); + } + + out: +- err = dpmac_clear_irq_status(mc_dev->mc_io, 0, mc_dev->mc_handle, +- irq_index, clear); +- if (err < 0) +- dev_err(&mc_dev->dev, "dpmac_clear_irq_status() err %d\n", err); ++ dpmac_clear_irq_status(mc_dev->mc_io, 0, mc_dev->mc_handle, ++ DPMAC_IRQ_INDEX, status); + + return IRQ_HANDLED; +- +-err: +- dev_warn(dev, "DPMAC IRQ %d was not handled!\n", irq_num); +- return IRQ_NONE; + } + + static int setup_irqs(struct fsl_mc_device *mc_dev) +@@ -437,19 +408,6 @@ static int setup_irqs(struct fsl_mc_devi + return err; + } + +- err = dpmac_set_irq_mask(mc_dev->mc_io, 0, mc_dev->mc_handle, +- DPMAC_IRQ_INDEX, dpmac_irq_mask); +- if (err < 0) { +- dev_err(&mc_dev->dev, "dpmac_set_irq_mask err %d\n", err); +- goto free_irq; +- } +- err = dpmac_set_irq_enable(mc_dev->mc_io, 0, mc_dev->mc_handle, +- DPMAC_IRQ_INDEX, 0); +- if (err) { +- dev_err(&mc_dev->dev, "dpmac_set_irq_enable err %d\n", err); +- goto free_irq; +- } +- + err = devm_request_threaded_irq(&mc_dev->dev, + mc_dev->irqs[0]->msi_desc->irq, + NULL, &dpaa2_mac_irq_handler, +@@ -463,7 +421,7 @@ static int setup_irqs(struct fsl_mc_devi + + err = dpmac_set_irq_mask(mc_dev->mc_io, 0, mc_dev->mc_handle, + DPMAC_IRQ_INDEX, dpmac_irq_mask); +- if (err < 0) { ++ if (err) { + dev_err(&mc_dev->dev, "dpmac_set_irq_mask err %d\n", err); + goto free_irq; + } +@@ -490,12 +448,12 @@ static void teardown_irqs(struct fsl_mc_ + + err = dpmac_set_irq_mask(mc_dev->mc_io, 0, mc_dev->mc_handle, + DPMAC_IRQ_INDEX, dpmac_irq_mask); +- if (err < 0) ++ if (err) + dev_err(&mc_dev->dev, "dpmac_set_irq_mask err %d\n", err); + + err = dpmac_set_irq_enable(mc_dev->mc_io, 0, mc_dev->mc_handle, + DPMAC_IRQ_INDEX, 0); +- if (err < 0) ++ if (err) + dev_err(&mc_dev->dev, "dpmac_set_irq_enable err %d\n", err); + + devm_free_irq(&mc_dev->dev, mc_dev->irqs[0]->msi_desc->irq, &mc_dev->dev); +@@ -562,9 +520,6 @@ static int dpaa2_mac_probe(struct fsl_mc + phy_interface_t if_mode; + int err = 0; + +- /* just being completely paranoid */ +- if (!mc_dev) +- return -EFAULT; + dev = &mc_dev->dev; + + /* prepare a net_dev structure to make the phy lib API happy */ diff --git a/target/linux/layerscape/patches-4.4/7210-staging-fsl-dpaa2-mac-Fix-unregister_netdev-issue.patch b/target/linux/layerscape/patches-4.4/7210-staging-fsl-dpaa2-mac-Fix-unregister_netdev-issue.patch new file mode 100644 index 0000000000..ea582835c8 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7210-staging-fsl-dpaa2-mac-Fix-unregister_netdev-issue.patch @@ -0,0 +1,42 @@ +From e74b6010eca026625ba4e39c80620320ca777deb Mon Sep 17 00:00:00 2001 +From: Ioana Radulescu +Date: Tue, 5 Apr 2016 13:35:14 +0300 +Subject: [PATCH 210/226] staging: fsl-dpaa2/mac: Fix unregister_netdev issue + +We only register the netdevice associated with a mac object if +ONFIG_FSL_DPAA2_MAC_NETDEV is set, but we always unregister it +during device remove(). Fix this by ifdef-ing the unregister +operation. + +Also ifdef the change in netdevice name as it only makes sense +under this option. + +Signed-off-by: Ioana Radulescu +(cherry picked from commit dd6a5313e194168d46fef495a6e3bc5207801473) +--- + drivers/staging/fsl-dpaa2/mac/mac.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/staging/fsl-dpaa2/mac/mac.c ++++ b/drivers/staging/fsl-dpaa2/mac/mac.c +@@ -534,7 +534,10 @@ static int dpaa2_mac_probe(struct fsl_mc + priv->netdev = netdev; + + SET_NETDEV_DEV(netdev, dev); ++ ++#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS + snprintf(netdev->name, IFNAMSIZ, "mac%d", mc_dev->obj_desc.id); ++#endif + + dev_set_drvdata(dev, priv); + +@@ -684,7 +687,9 @@ static int dpaa2_mac_remove(struct fsl_m + struct device *dev = &mc_dev->dev; + struct dpaa2_mac_priv *priv = dev_get_drvdata(dev); + ++#ifdef CONFIG_FSL_DPAA2_MAC_NETDEVS + unregister_netdev(priv->netdev); ++#endif + teardown_irqs(priv->mc_dev); + dpmac_close(priv->mc_dev->mc_io, 0, priv->mc_dev->mc_handle); + fsl_mc_portal_free(priv->mc_dev->mc_io); diff --git a/target/linux/layerscape/patches-4.4/7211-staging-fsl-dpaa2-mac-Don-t-call-devm_free_irq.patch b/target/linux/layerscape/patches-4.4/7211-staging-fsl-dpaa2-mac-Don-t-call-devm_free_irq.patch new file mode 100644 index 0000000000..46ecaea1e1 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7211-staging-fsl-dpaa2-mac-Don-t-call-devm_free_irq.patch @@ -0,0 +1,42 @@ +From b4d01330c66cbab3563c58f66f73f55726c09aec Mon Sep 17 00:00:00 2001 +From: Ioana Radulescu +Date: Tue, 5 Apr 2016 17:54:14 +0300 +Subject: [PATCH 211/226] staging: fsl-dpaa2/mac: Don't call devm_free_irq + +MAC interrupts are registered with devm_request_threaded_irq(), so +there's no need to explicitly unregister them in case of a probe +error or at device remove, as the kernel will take care of that for us. + +Signed-off-by: Ioana Radulescu +(cherry picked from commit 58e0fd23ade4b13e0a3c7e5f201802013e12df1c) +(Stuart: resolved merge conflict) +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/mac/mac.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/mac/mac.c ++++ b/drivers/staging/fsl-dpaa2/mac/mac.c +@@ -429,13 +429,11 @@ static int setup_irqs(struct fsl_mc_devi + DPMAC_IRQ_INDEX, 1); + if (err) { + dev_err(&mc_dev->dev, "dpmac_set_irq_enable err %d\n", err); +- goto unregister_irq; ++ goto free_irq; + } + + return 0; + +-unregister_irq: +- devm_free_irq(&mc_dev->dev, mc_dev->irqs[0]->msi_desc->irq, &mc_dev->dev); + free_irq: + fsl_mc_free_irqs(mc_dev); + +@@ -456,7 +454,6 @@ static void teardown_irqs(struct fsl_mc_ + if (err) + dev_err(&mc_dev->dev, "dpmac_set_irq_enable err %d\n", err); + +- devm_free_irq(&mc_dev->dev, mc_dev->irqs[0]->msi_desc->irq, &mc_dev->dev); + fsl_mc_free_irqs(mc_dev); + } + diff --git a/target/linux/layerscape/patches-4.4/7212-staging-fsl-dpaa2-mac-Use-of_property_read_32.patch b/target/linux/layerscape/patches-4.4/7212-staging-fsl-dpaa2-mac-Use-of_property_read_32.patch new file mode 100644 index 0000000000..8ab6de9bf0 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7212-staging-fsl-dpaa2-mac-Use-of_property_read_32.patch @@ -0,0 +1,43 @@ +From e554a03fe11719db373be3c54ce8f230a98dd5e4 Mon Sep 17 00:00:00 2001 +From: Ioana Radulescu +Date: Wed, 6 Apr 2016 15:05:47 +0300 +Subject: [PATCH 212/226] staging: fsl-dpaa2/mac: Use of_property_read_32() + +Simplify reading of the dpmac id from device tree. + +Signed-off-by: Ioana Radulescu +(cherry picked from commit b0562bda063f95923bcd8b78dea84a6e0587d3da) +--- + drivers/staging/fsl-dpaa2/mac/mac.c | 13 +++++-------- + 1 file changed, 5 insertions(+), 8 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/mac/mac.c ++++ b/drivers/staging/fsl-dpaa2/mac/mac.c +@@ -461,9 +461,8 @@ static struct device_node *lookup_node(s + { + struct device_node *dpmacs, *dpmac = NULL; + struct device_node *mc_node = dev->of_node; +- const void *id; +- int lenp; +- int dpmac_id_be32 = cpu_to_be32(dpmac_id); ++ u32 id; ++ int err; + + dpmacs = of_find_node_by_name(mc_node, "dpmacs"); + if (!dpmacs) { +@@ -472,12 +471,10 @@ static struct device_node *lookup_node(s + } + + while ((dpmac = of_get_next_child(dpmacs, dpmac))) { +- id = of_get_property(dpmac, "reg", &lenp); +- if (!id || lenp != sizeof(int)) { +- dev_warn(dev, "Unsuitable reg property in dpmac node\n"); ++ err = of_property_read_u32(dpmac, "reg", &id); ++ if (err) + continue; +- } +- if (*(int *)id == dpmac_id_be32) ++ if (id == dpmac_id) + return dpmac; + } + diff --git a/target/linux/layerscape/patches-4.4/7213-staging-fsl-dpaa2-mac-Remove-version-checks.patch b/target/linux/layerscape/patches-4.4/7213-staging-fsl-dpaa2-mac-Remove-version-checks.patch new file mode 100644 index 0000000000..2c7bb88cc0 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7213-staging-fsl-dpaa2-mac-Remove-version-checks.patch @@ -0,0 +1,61 @@ +From 3e4dc755337ca86d29c9f21f5225a77595aee032 Mon Sep 17 00:00:00 2001 +From: Ioana Radulescu +Date: Wed, 6 Apr 2016 12:12:06 +0300 +Subject: [PATCH 213/226] staging: fsl-dpaa2/mac: Remove version checks + +We intend to ensure backward compatibility with all MC versions +going forward, so we don't require an exact version match anymore +between MAC driver, DPMAC API version and DPMAC object version in +MC firmware. + +Signed-off-by: Ioana Radulescu +(cherry picked from commit eafc210ef421fb0dca67b67bf1a2fe98cd060c31) +--- + drivers/staging/fsl-dpaa2/mac/mac.c | 29 ++--------------------------- + 1 file changed, 2 insertions(+), 27 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/mac/mac.c ++++ b/drivers/staging/fsl-dpaa2/mac/mac.c +@@ -481,30 +481,6 @@ static struct device_node *lookup_node(s + return NULL; + } + +-static int check_dpmac_version(struct dpaa2_mac_priv *priv) +-{ +- struct device *dev = &priv->mc_dev->dev; +- int mc_version = priv->attr.version.major; +- +- /* Check that the FLIB-defined version matches the one reported by MC */ +- if (mc_version != DPMAC_VER_MAJOR) { +- dev_err(dev, "DPMAC FLIB version mismatch: MC says %d, we have %d\n", +- mc_version, DPMAC_VER_MAJOR); +- return -EINVAL; +- } +- +- /* ... and that we actually support it */ +- if (mc_version < DPAA2_SUPPORTED_DPMAC_VERSION) { +- dev_err(dev, "Unsupported DPMAC FLIB version (%d)\n", +- mc_version); +- return -EINVAL; +- } +- +- dev_dbg(dev, "Using DPMAC FLIB version %d\n", mc_version); +- +- return 0; +-} +- + static int dpaa2_mac_probe(struct fsl_mc_device *mc_dev) + { + struct device *dev; +@@ -558,9 +534,8 @@ static int dpaa2_mac_probe(struct fsl_mc + goto err_close; + } + +- err = check_dpmac_version(priv); +- if (err) +- goto err_close; ++ dev_info_once(dev, "Using DPMAC API %d.%d\n", ++ priv->attr.version.major, priv->attr.version.minor); + + /* Look up the DPMAC node in the device-tree. */ + dpmac_node = lookup_node(dev, priv->attr.id); diff --git a/target/linux/layerscape/patches-4.4/7214-staging-fsl-dpaa2-mac-match-id-cleanup.patch b/target/linux/layerscape/patches-4.4/7214-staging-fsl-dpaa2-mac-match-id-cleanup.patch new file mode 100644 index 0000000000..850d0e630c --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7214-staging-fsl-dpaa2-mac-match-id-cleanup.patch @@ -0,0 +1,26 @@ +From 137f5f17bad655024d18123b1be696ad6b9ec729 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Wed, 15 Jun 2016 14:04:32 -0500 +Subject: [PATCH 214/226] staging: fsl-dpaa2/mac: match id cleanup + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/mac/mac.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/mac/mac.c ++++ b/drivers/staging/fsl-dpaa2/mac/mac.c +@@ -670,12 +670,10 @@ static int dpaa2_mac_remove(struct fsl_m + return 0; + } + +-static const struct fsl_mc_device_match_id dpaa2_mac_match_id_table[] = { ++static const struct fsl_mc_device_id dpaa2_mac_match_id_table[] = { + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dpmac", +- .ver_major = DPMAC_VER_MAJOR, +- .ver_minor = DPMAC_VER_MINOR, + }, + {} + }; diff --git a/target/linux/layerscape/patches-4.4/7215-dpaa2-evb-Added-Edge-Virtual-Bridge-driver.patch b/target/linux/layerscape/patches-4.4/7215-dpaa2-evb-Added-Edge-Virtual-Bridge-driver.patch new file mode 100644 index 0000000000..344c2aec31 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7215-dpaa2-evb-Added-Edge-Virtual-Bridge-driver.patch @@ -0,0 +1,2918 @@ +From 54bcaca10728c1a1c8adfa48124ea79cce4ef929 Mon Sep 17 00:00:00 2001 +From: Razvan Stefanescu +Date: Tue, 22 Sep 2015 08:43:08 +0300 +Subject: [PATCH 215/226] dpaa2-evb: Added Edge Virtual Bridge driver + +This is a commit of the cummulative, squashed dpaa2-evb patches. +All the commit logs are preserved below. + +Signed-off-by: Stuart Yoder + +---------------------------------------------------------------- + +dpaa2-evb: Added Edge Virtual Bridge driver + +This contains the following patches migrated from linux-v4.0: +staging: fsl-dpaa2: evb: Added Edge Virtual Bridge driver +staging: fsl-dpaa2: evb: Added ethtool port counters +staging: fsl-dpaa2: evb: Include by default in configuration +staging: fsl-dpaa2: evb: Rebasing onto kernel 4.0 +staging: fsl-dpaa2: evb: Port to MC-0.7 FLibs +dpaa2-evb: Set carrier state on port open +dpaa2-evb: Add support for link state update +dpaa2-evb: Update flib to MC 8.0.1 +staging: fsl-mc: migrated remaining flibs for MC fw 8.0.0 (split) + +Inital patches have been signed-off by: +Alex Marginean +J. German Rivera +Bogdan Hamciuc +Razvan Stefanescu + +And reviewed by: +Stuart Yoder + +Porting to linux-v4.1 requires changes related to iflink usage and +ndo_bridge_getlink() parameters list. + +Signed-off-by: Razvan Stefanescu + +dpaa2-evb: Port to linux-v4.1 + +Update iflink usage. +Update evb_getlink() parameter list to match ndo_bridge_getlink(). + +Signed-off-by: Razvan Stefanescu + +dpaa2-evb: Add VLAN_8021Q dependency + +EVB traffic steering methods related to VLAN require VLAN support in kernel. + +Signed-off-by: Razvan Stefanescu + +dpaa2-evb: Update dpdmux binary interface to 5.0 + +This corresponds to MC release 0.8.0. + +Signed-off-by: Razvan Stefanescu + +dpaa2-evb: Add support to set max frame length. + +All the packets bigger than max_frame_length will be dropped. + +Signed-off-by: Mihaela Panescu + +dpaa2-evb: resolve compile issues on uprev to 4.5 + +-irq_number field no longer exists in fsl-mc interrupt + struct +-netdev_master_upper_dev_link() has 2 new parameters, which + are set to NULL for now + +Signed-off-by: Stuart Yoder +--- + MAINTAINERS | 6 + + drivers/staging/fsl-dpaa2/Kconfig | 1 + + drivers/staging/fsl-dpaa2/Makefile | 1 + + drivers/staging/fsl-dpaa2/evb/Kconfig | 8 + + drivers/staging/fsl-dpaa2/evb/Makefile | 10 + + drivers/staging/fsl-dpaa2/evb/dpdmux-cmd.h | 256 ++++++ + drivers/staging/fsl-dpaa2/evb/dpdmux.c | 567 +++++++++++++ + drivers/staging/fsl-dpaa2/evb/dpdmux.h | 724 +++++++++++++++++ + drivers/staging/fsl-dpaa2/evb/evb.c | 1216 ++++++++++++++++++++++++++++ + 9 files changed, 2789 insertions(+) + create mode 100644 drivers/staging/fsl-dpaa2/evb/Kconfig + create mode 100644 drivers/staging/fsl-dpaa2/evb/Makefile + create mode 100644 drivers/staging/fsl-dpaa2/evb/dpdmux-cmd.h + create mode 100644 drivers/staging/fsl-dpaa2/evb/dpdmux.c + create mode 100644 drivers/staging/fsl-dpaa2/evb/dpdmux.h + create mode 100644 drivers/staging/fsl-dpaa2/evb/evb.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -4560,6 +4560,12 @@ L: linux-kernel@vger.kernel.org + S: Maintained + F: drivers/staging/fsl-dpaa2/mac/ + +++FREESCALE DPAA2 EDGE VIRTUAL BRIDGE DRIVER ++M: Alex Marginean ++L: linux-kernel@vger.kernel.org ++S: Maintained ++F: drivers/staging/fsl-dpaa2/evb/ ++ + FREEVXFS FILESYSTEM + M: Christoph Hellwig + W: ftp://ftp.openlinux.org/pub/people/hch/vxfs +--- a/drivers/staging/fsl-dpaa2/Kconfig ++++ b/drivers/staging/fsl-dpaa2/Kconfig +@@ -10,3 +10,4 @@ config FSL_DPAA2 + # TODO move DPIO driver in-here? + source "drivers/staging/fsl-dpaa2/ethernet/Kconfig" + source "drivers/staging/fsl-dpaa2/mac/Kconfig" ++source "drivers/staging/fsl-dpaa2/evb/Kconfig" +--- a/drivers/staging/fsl-dpaa2/Makefile ++++ b/drivers/staging/fsl-dpaa2/Makefile +@@ -4,3 +4,4 @@ + + obj-$(CONFIG_FSL_DPAA2_ETH) += ethernet/ + obj-$(CONFIG_FSL_DPAA2_MAC) += mac/ ++obj-$(CONFIG_FSL_DPAA2_EVB) += evb/ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/evb/Kconfig +@@ -0,0 +1,8 @@ ++config FSL_DPAA2_EVB ++ tristate "DPAA2 Edge Virtual Bridge" ++ depends on FSL_MC_BUS && FSL_DPAA2 && FSL_DPAA2_ETH ++ select FSL_DPAA2_MAC ++ select VLAN_8021Q ++ default y ++ ---help--- ++ Prototype driver for DPAA2 Edge Virtual Bridge. +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/evb/Makefile +@@ -0,0 +1,10 @@ ++ ++obj-$(CONFIG_FSL_DPAA2_EVB) += dpaa2-evb.o ++ ++dpaa2-evb-objs := evb.o dpdmux.o ++ ++all: ++ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules ++ ++clean: ++ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/evb/dpdmux-cmd.h +@@ -0,0 +1,256 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef _FSL_DPDMUX_CMD_H ++#define _FSL_DPDMUX_CMD_H ++ ++/* DPDMUX Version */ ++#define DPDMUX_VER_MAJOR 5 ++#define DPDMUX_VER_MINOR 0 ++ ++/* Command IDs */ ++#define DPDMUX_CMDID_CLOSE 0x800 ++#define DPDMUX_CMDID_OPEN 0x806 ++#define DPDMUX_CMDID_CREATE 0x906 ++#define DPDMUX_CMDID_DESTROY 0x900 ++ ++#define DPDMUX_CMDID_ENABLE 0x002 ++#define DPDMUX_CMDID_DISABLE 0x003 ++#define DPDMUX_CMDID_GET_ATTR 0x004 ++#define DPDMUX_CMDID_RESET 0x005 ++#define DPDMUX_CMDID_IS_ENABLED 0x006 ++ ++#define DPDMUX_CMDID_SET_IRQ 0x010 ++#define DPDMUX_CMDID_GET_IRQ 0x011 ++#define DPDMUX_CMDID_SET_IRQ_ENABLE 0x012 ++#define DPDMUX_CMDID_GET_IRQ_ENABLE 0x013 ++#define DPDMUX_CMDID_SET_IRQ_MASK 0x014 ++#define DPDMUX_CMDID_GET_IRQ_MASK 0x015 ++#define DPDMUX_CMDID_GET_IRQ_STATUS 0x016 ++#define DPDMUX_CMDID_CLEAR_IRQ_STATUS 0x017 ++ ++#define DPDMUX_CMDID_UL_SET_MAX_FRAME_LENGTH 0x0a1 ++ ++#define DPDMUX_CMDID_UL_RESET_COUNTERS 0x0a3 ++ ++#define DPDMUX_CMDID_IF_SET_ACCEPTED_FRAMES 0x0a7 ++#define DPDMUX_CMDID_IF_GET_ATTR 0x0a8 ++ ++#define DPDMUX_CMDID_IF_ADD_L2_RULE 0x0b0 ++#define DPDMUX_CMDID_IF_REMOVE_L2_RULE 0x0b1 ++#define DPDMUX_CMDID_IF_GET_COUNTER 0x0b2 ++#define DPDMUX_CMDID_IF_SET_LINK_CFG 0x0b3 ++#define DPDMUX_CMDID_IF_GET_LINK_STATE 0x0b4 ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_OPEN(cmd, dpdmux_id) \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, dpdmux_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_CREATE(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, enum dpdmux_method, cfg->method);\ ++ MC_CMD_OP(cmd, 0, 8, 8, enum dpdmux_manip, cfg->manip);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->num_ifs);\ ++ MC_CMD_OP(cmd, 1, 0, 16, uint16_t, cfg->adv.max_dmat_entries);\ ++ MC_CMD_OP(cmd, 1, 16, 16, uint16_t, cfg->adv.max_mc_groups);\ ++ MC_CMD_OP(cmd, 1, 32, 16, uint16_t, cfg->adv.max_vlan_ids);\ ++ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->adv.options);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_RSP_IS_ENABLED(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_SET_IRQ(cmd, irq_index, irq_cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, irq_index);\ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, irq_cfg->val);\ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\ ++ MC_CMD_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_GET_IRQ(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_RSP_GET_IRQ(cmd, type, irq_cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val); \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr); \ ++ MC_RSP_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, type); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_SET_IRQ_ENABLE(cmd, irq_index, en) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, en);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_GET_IRQ_ENABLE(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_RSP_GET_IRQ_ENABLE(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_SET_IRQ_MASK(cmd, irq_index, mask) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, mask); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_GET_IRQ_MASK(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_RSP_GET_IRQ_MASK(cmd, mask) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mask) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_GET_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_RSP_GET_IRQ_STATUS(cmd, status) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, status) \ ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index); \ ++} while (0) ++ ++#define DPDMUX_RSP_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 8, enum dpdmux_method, attr->method);\ ++ MC_RSP_OP(cmd, 0, 8, 8, enum dpdmux_manip, attr->manip);\ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, attr->num_ifs);\ ++ MC_RSP_OP(cmd, 0, 32, 16, uint16_t, attr->mem_size);\ ++ MC_RSP_OP(cmd, 2, 0, 32, int, attr->id);\ ++ MC_RSP_OP(cmd, 3, 0, 64, uint64_t, attr->options);\ ++ MC_RSP_OP(cmd, 4, 0, 16, uint16_t, attr->version.major);\ ++ MC_RSP_OP(cmd, 4, 16, 16, uint16_t, attr->version.minor);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_UL_SET_MAX_FRAME_LENGTH(cmd, max_frame_length) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, max_frame_length) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_IF_SET_ACCEPTED_FRAMES(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 4, enum dpdmux_accepted_frames_type, cfg->type);\ ++ MC_CMD_OP(cmd, 0, 20, 4, enum dpdmux_unaccepted_frames_action, \ ++ cfg->unaccept_act);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_IF_GET_ATTR(cmd, if_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_RSP_IF_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 56, 4, enum dpdmux_accepted_frames_type, \ ++ attr->accept_frame_type);\ ++ MC_RSP_OP(cmd, 0, 24, 1, int, attr->enabled);\ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, attr->rate);\ ++} while (0) ++ ++#define DPDMUX_CMD_IF_REMOVE_L2_RULE(cmd, if_id, l2_rule) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, l2_rule->mac_addr[5]);\ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, l2_rule->mac_addr[4]);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, l2_rule->mac_addr[3]);\ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, l2_rule->mac_addr[2]);\ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, l2_rule->mac_addr[1]);\ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, l2_rule->mac_addr[0]);\ ++ MC_CMD_OP(cmd, 1, 32, 16, uint16_t, l2_rule->vlan_id);\ ++} while (0) ++ ++#define DPDMUX_CMD_IF_ADD_L2_RULE(cmd, if_id, l2_rule) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, l2_rule->mac_addr[5]);\ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, l2_rule->mac_addr[4]);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, l2_rule->mac_addr[3]);\ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, l2_rule->mac_addr[2]);\ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, l2_rule->mac_addr[1]);\ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, l2_rule->mac_addr[0]);\ ++ MC_CMD_OP(cmd, 1, 32, 16, uint16_t, l2_rule->vlan_id);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_IF_GET_COUNTER(cmd, if_id, counter_type) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 8, enum dpdmux_counter_type, counter_type);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_RSP_IF_GET_COUNTER(cmd, counter) \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, counter) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_IF_SET_LINK_CFG(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->rate);\ ++ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->options);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_CMD_IF_GET_LINK_STATE(cmd, if_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPDMUX_RSP_IF_GET_LINK_STATE(cmd, state) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 32, 1, int, state->up);\ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, state->rate);\ ++ MC_RSP_OP(cmd, 2, 0, 64, uint64_t, state->options);\ ++} while (0) ++ ++#endif /* _FSL_DPDMUX_CMD_H */ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/evb/dpdmux.c +@@ -0,0 +1,567 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include "../../fsl-mc/include/mc-sys.h" ++#include "../../fsl-mc/include/mc-cmd.h" ++#include "dpdmux.h" ++#include "dpdmux-cmd.h" ++ ++int dpdmux_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpdmux_id, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_OPEN, ++ cmd_flags, ++ 0); ++ DPDMUX_CMD_OPEN(cmd, dpdmux_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpdmux_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_CLOSE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpdmux_cfg *cfg, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_CREATE, ++ cmd_flags, ++ 0); ++ DPDMUX_CMD_CREATE(cmd, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpdmux_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_DESTROY, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_ENABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_DISABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IS_ENABLED, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPDMUX_RSP_IS_ENABLED(cmd, *en); ++ ++ return 0; ++} ++ ++int dpdmux_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_RESET, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpdmux_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_SET_IRQ, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_SET_IRQ(cmd, irq_index, irq_cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpdmux_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_IRQ, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_GET_IRQ(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPDMUX_RSP_GET_IRQ(cmd, *type, irq_cfg); ++ ++ return 0; ++} ++ ++int dpdmux_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_SET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_SET_IRQ_ENABLE(cmd, irq_index, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_GET_IRQ_ENABLE(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPDMUX_RSP_GET_IRQ_ENABLE(cmd, *en); ++ ++ return 0; ++} ++ ++int dpdmux_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_SET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_SET_IRQ_MASK(cmd, irq_index, mask); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_GET_IRQ_MASK(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPDMUX_RSP_GET_IRQ_MASK(cmd, *mask); ++ ++ return 0; ++} ++ ++int dpdmux_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_GET_IRQ_STATUS(cmd, irq_index, *status); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPDMUX_RSP_GET_IRQ_STATUS(cmd, *status); ++ ++ return 0; ++} ++ ++int dpdmux_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_CLEAR_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpdmux_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_ATTR, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPDMUX_RSP_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpdmux_ul_set_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t max_frame_length) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_UL_SET_MAX_FRAME_LENGTH, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_UL_SET_MAX_FRAME_LENGTH(cmd, max_frame_length); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_ul_reset_counters(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_UL_RESET_COUNTERS, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_if_set_accepted_frames(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpdmux_accepted_frames *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_SET_ACCEPTED_FRAMES, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_IF_SET_ACCEPTED_FRAMES(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_if_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpdmux_if_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_GET_ATTR, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_IF_GET_ATTR(cmd, if_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPDMUX_RSP_IF_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpdmux_if_remove_l2_rule(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpdmux_l2_rule *rule) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_REMOVE_L2_RULE, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_IF_REMOVE_L2_RULE(cmd, if_id, rule); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_if_add_l2_rule(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpdmux_l2_rule *rule) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_ADD_L2_RULE, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_IF_ADD_L2_RULE(cmd, if_id, rule); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_if_get_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ enum dpdmux_counter_type counter_type, ++ uint64_t *counter) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_GET_COUNTER, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_IF_GET_COUNTER(cmd, if_id, counter_type); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPDMUX_RSP_IF_GET_COUNTER(cmd, *counter); ++ ++ return 0; ++} ++ ++int dpdmux_if_set_link_cfg(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpdmux_link_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_SET_LINK_CFG, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_IF_SET_LINK_CFG(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpdmux_if_get_link_state(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpdmux_link_state *state) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_IF_GET_LINK_STATE, ++ cmd_flags, ++ token); ++ DPDMUX_CMD_IF_GET_LINK_STATE(cmd, if_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPDMUX_RSP_IF_GET_LINK_STATE(cmd, state); ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/evb/dpdmux.h +@@ -0,0 +1,724 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPDMUX_H ++#define __FSL_DPDMUX_H ++ ++#include "../../fsl-mc/include/net.h" ++ ++struct fsl_mc_io; ++ ++/* Data Path Demux API ++ * Contains API for handling DPDMUX topology and functionality ++ */ ++ ++/** ++ * dpdmux_open() - Open a control session for the specified object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @dpdmux_id: DPDMUX unique ID ++ * @token: Returned token; use in subsequent API calls ++ * ++ * This function can be used to open a control session for an ++ * already created object; an object may have been declared in ++ * the DPL or by calling the dpdmux_create() function. ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent commands for ++ * this specific object. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpdmux_id, ++ uint16_t *token); ++ ++/** ++ * dpdmux_close() - Close the control session of the object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * ++ * After this function is called, no further operations are ++ * allowed on the object without opening a new control session. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * DPDMUX general options ++ */ ++ ++/** ++ * Enable bridging between internal interfaces ++ */ ++#define DPDMUX_OPT_BRIDGE_EN 0x0000000000000002ULL ++ ++#define DPDMUX_IRQ_INDEX_IF 0x0000 ++#define DPDMUX_IRQ_INDEX 0x0001 ++ ++/** ++ * IRQ event - Indicates that the link state changed ++ */ ++#define DPDMUX_IRQ_EVENT_LINK_CHANGED 0x0001 ++ ++/** ++ * enum dpdmux_manip - DPDMUX manipulation operations ++ * @DPDMUX_MANIP_NONE: No manipulation on frames ++ * @DPDMUX_MANIP_ADD_REMOVE_S_VLAN: Add S-VLAN on egress, remove it on ingress ++ */ ++enum dpdmux_manip { ++ DPDMUX_MANIP_NONE = 0x0, ++ DPDMUX_MANIP_ADD_REMOVE_S_VLAN = 0x1 ++}; ++ ++/** ++ * enum dpdmux_method - DPDMUX method options ++ * @DPDMUX_METHOD_NONE: no DPDMUX method ++ * @DPDMUX_METHOD_C_VLAN_MAC: DPDMUX based on C-VLAN and MAC address ++ * @DPDMUX_METHOD_MAC: DPDMUX based on MAC address ++ * @DPDMUX_METHOD_C_VLAN: DPDMUX based on C-VLAN ++ * @DPDMUX_METHOD_S_VLAN: DPDMUX based on S-VLAN ++ */ ++enum dpdmux_method { ++ DPDMUX_METHOD_NONE = 0x0, ++ DPDMUX_METHOD_C_VLAN_MAC = 0x1, ++ DPDMUX_METHOD_MAC = 0x2, ++ DPDMUX_METHOD_C_VLAN = 0x3, ++ DPDMUX_METHOD_S_VLAN = 0x4 ++}; ++ ++/** ++ * struct dpdmux_cfg - DPDMUX configuration parameters ++ * @method: Defines the operation method for the DPDMUX address table ++ * @manip: Required manipulation operation ++ * @num_ifs: Number of interfaces (excluding the uplink interface) ++ * @adv: Advanced parameters; default is all zeros; ++ * use this structure to change default settings ++ */ ++struct dpdmux_cfg { ++ enum dpdmux_method method; ++ enum dpdmux_manip manip; ++ uint16_t num_ifs; ++ /** ++ * struct adv - Advanced parameters ++ * @options: DPDMUX options - combination of 'DPDMUX_OPT_' flags ++ * @max_dmat_entries: Maximum entries in DPDMUX address table ++ * 0 - indicates default: 64 entries per interface. ++ * @max_mc_groups: Number of multicast groups in DPDMUX table ++ * 0 - indicates default: 32 multicast groups ++ * @max_vlan_ids: max vlan ids allowed in the system - ++ * relevant only case of working in mac+vlan method. ++ * 0 - indicates default 16 vlan ids. ++ */ ++ struct { ++ uint64_t options; ++ uint16_t max_dmat_entries; ++ uint16_t max_mc_groups; ++ uint16_t max_vlan_ids; ++ } adv; ++}; ++ ++/** ++ * dpdmux_create() - Create the DPDMUX object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @cfg: Configuration structure ++ * @token: Returned token; use in subsequent API calls ++ * ++ * Create the DPDMUX object, allocate required resources and ++ * perform required initialization. ++ * ++ * The object can be created either by declaring it in the ++ * DPL file, or by calling this function. ++ * ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent calls to ++ * this specific object. For objects that are created using the ++ * DPL file, call dpdmux_open() function to get an authentication ++ * token first. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpdmux_cfg *cfg, ++ uint16_t *token); ++ ++/** ++ * dpdmux_destroy() - Destroy the DPDMUX object and release all its resources. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpdmux_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpdmux_enable() - Enable DPDMUX functionality ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpdmux_disable() - Disable DPDMUX functionality ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpdmux_is_enabled() - Check if the DPDMUX is enabled. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @en: Returns '1' if object is enabled; '0' otherwise ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en); ++ ++/** ++ * dpdmux_reset() - Reset the DPDMUX, returns the object to initial state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * struct dpdmux_irq_cfg - IRQ configuration ++ * @addr: Address that must be written to signal a message-based interrupt ++ * @val: Value to write into irq_addr address ++ * @irq_num: A user defined number associated with this IRQ ++ */ ++struct dpdmux_irq_cfg { ++ uint64_t addr; ++ uint32_t val; ++ int irq_num; ++}; ++ ++/** ++ * dpdmux_set_irq() - Set IRQ information for the DPDMUX to trigger an interrupt. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @irq_index: Identifies the interrupt index to configure ++ * @irq_cfg: IRQ configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpdmux_irq_cfg *irq_cfg); ++ ++/** ++ * dpdmux_get_irq() - Get IRQ information from the DPDMUX. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @irq_index: The interrupt index to configure ++ * @type: Interrupt type: 0 represents message interrupt ++ * type (both irq_addr and irq_val are valid) ++ * @irq_cfg: IRQ attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpdmux_irq_cfg *irq_cfg); ++ ++/** ++ * dpdmux_set_irq_enable() - Set overall interrupt state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @irq_index: The interrupt index to configure ++ * @en: Interrupt state - enable = 1, disable = 0 ++ * ++ * Allows GPP software to control when interrupts are generated. ++ * Each interrupt can have up to 32 causes. The enable/disable control's the ++ * overall interrupt state. if the interrupt is disabled no causes will cause ++ * an interrupt. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en); ++ ++/** ++ * dpdmux_get_irq_enable() - Get overall interrupt state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @irq_index: The interrupt index to configure ++ * @en: Returned interrupt state - enable = 1, disable = 0 ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en); ++ ++/** ++ * dpdmux_set_irq_mask() - Set interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @irq_index: The interrupt index to configure ++ * @mask: event mask to trigger interrupt; ++ * each bit: ++ * 0 = ignore event ++ * 1 = consider event for asserting IRQ ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask); ++ ++/** ++ * dpdmux_get_irq_mask() - Get interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @irq_index: The interrupt index to configure ++ * @mask: Returned event mask to trigger interrupt ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask); ++ ++/** ++ * dpdmux_get_irq_status() - Get the current status of any pending interrupts. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @irq_index: The interrupt index to configure ++ * @status: Returned interrupts status - one bit per cause: ++ * 0 = no interrupt pending ++ * 1 = interrupt pending ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status); ++ ++/** ++ * dpdmux_clear_irq_status() - Clear a pending interrupt's status ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @irq_index: The interrupt index to configure ++ * @status: bits to clear (W1C) - one bit per cause: ++ * 0 = don't change ++ * 1 = clear status bit ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status); ++ ++/** ++ * struct dpdmux_attr - Structure representing DPDMUX attributes ++ * @id: DPDMUX object ID ++ * @version: DPDMUX version ++ * @options: Configuration options (bitmap) ++ * @method: DPDMUX address table method ++ * @manip: DPDMUX manipulation type ++ * @num_ifs: Number of interfaces (excluding the uplink interface) ++ * @mem_size: DPDMUX frame storage memory size ++ */ ++struct dpdmux_attr { ++ int id; ++ /** ++ * struct version - DPDMUX version ++ * @major: DPDMUX major version ++ * @minor: DPDMUX minor version ++ */ ++ struct { ++ uint16_t major; ++ uint16_t minor; ++ } version; ++ uint64_t options; ++ enum dpdmux_method method; ++ enum dpdmux_manip manip; ++ uint16_t num_ifs; ++ uint16_t mem_size; ++}; ++ ++/** ++ * dpdmux_get_attributes() - Retrieve DPDMUX attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @attr: Returned object's attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpdmux_attr *attr); ++ ++/** ++ * dpdmux_ul_set_max_frame_length() - Set the maximum frame length in DPDMUX ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @max_frame_length: The required maximum frame length ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_ul_set_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t max_frame_length); ++ ++/** ++ * enum dpdmux_counter_type - Counter types ++ * @DPDMUX_CNT_ING_FRAME: Counts ingress frames ++ * @DPDMUX_CNT_ING_BYTE: Counts ingress bytes ++ * @DPDMUX_CNT_ING_FLTR_FRAME: Counts filtered ingress frames ++ * @DPDMUX_CNT_ING_FRAME_DISCARD: Counts discarded ingress frames ++ * @DPDMUX_CNT_ING_MCAST_FRAME: Counts ingress multicast frames ++ * @DPDMUX_CNT_ING_MCAST_BYTE: Counts ingress multicast bytes ++ * @DPDMUX_CNT_ING_BCAST_FRAME: Counts ingress broadcast frames ++ * @DPDMUX_CNT_ING_BCAST_BYTES: Counts ingress broadcast bytes ++ * @DPDMUX_CNT_EGR_FRAME: Counts egress frames ++ * @DPDMUX_CNT_EGR_BYTE: Counts egress bytes ++ * @DPDMUX_CNT_EGR_FRAME_DISCARD: Counts discarded egress frames ++ */ ++enum dpdmux_counter_type { ++ DPDMUX_CNT_ING_FRAME = 0x0, ++ DPDMUX_CNT_ING_BYTE = 0x1, ++ DPDMUX_CNT_ING_FLTR_FRAME = 0x2, ++ DPDMUX_CNT_ING_FRAME_DISCARD = 0x3, ++ DPDMUX_CNT_ING_MCAST_FRAME = 0x4, ++ DPDMUX_CNT_ING_MCAST_BYTE = 0x5, ++ DPDMUX_CNT_ING_BCAST_FRAME = 0x6, ++ DPDMUX_CNT_ING_BCAST_BYTES = 0x7, ++ DPDMUX_CNT_EGR_FRAME = 0x8, ++ DPDMUX_CNT_EGR_BYTE = 0x9, ++ DPDMUX_CNT_EGR_FRAME_DISCARD = 0xa ++}; ++ ++/** ++ * enum dpdmux_accepted_frames_type - DPDMUX frame types ++ * @DPDMUX_ADMIT_ALL: The device accepts VLAN tagged, untagged and ++ * priority-tagged frames ++ * @DPDMUX_ADMIT_ONLY_VLAN_TAGGED: The device discards untagged frames or ++ * priority-tagged frames that are received on this ++ * interface ++ * @DPDMUX_ADMIT_ONLY_UNTAGGED: Untagged frames or priority-tagged frames ++ * received on this interface are accepted ++ */ ++enum dpdmux_accepted_frames_type { ++ DPDMUX_ADMIT_ALL = 0, ++ DPDMUX_ADMIT_ONLY_VLAN_TAGGED = 1, ++ DPDMUX_ADMIT_ONLY_UNTAGGED = 2 ++}; ++ ++/** ++ * enum dpdmux_action - DPDMUX action for un-accepted frames ++ * @DPDMUX_ACTION_DROP: Drop un-accepted frames ++ * @DPDMUX_ACTION_REDIRECT_TO_CTRL: Redirect un-accepted frames to the ++ * control interface ++ */ ++enum dpdmux_action { ++ DPDMUX_ACTION_DROP = 0, ++ DPDMUX_ACTION_REDIRECT_TO_CTRL = 1 ++}; ++ ++/** ++ * struct dpdmux_accepted_frames - Frame types configuration ++ * @type: Defines ingress accepted frames ++ * @unaccept_act: Defines action on frames not accepted ++ */ ++struct dpdmux_accepted_frames { ++ enum dpdmux_accepted_frames_type type; ++ enum dpdmux_action unaccept_act; ++}; ++ ++/** ++ * dpdmux_if_set_accepted_frames() - Set the accepted frame types ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @if_id: Interface ID (0 for uplink, or 1-num_ifs); ++ * @cfg: Frame types configuration ++ * ++ * if 'DPDMUX_ADMIT_ONLY_VLAN_TAGGED' is set - untagged frames or ++ * priority-tagged frames are discarded. ++ * if 'DPDMUX_ADMIT_ONLY_UNTAGGED' is set - untagged frames or ++ * priority-tagged frames are accepted. ++ * if 'DPDMUX_ADMIT_ALL' is set (default mode) - all VLAN tagged, ++ * untagged and priority-tagged frame are accepted; ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_if_set_accepted_frames(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpdmux_accepted_frames *cfg); ++ ++/** ++ * struct dpdmux_if_attr - Structure representing frame types configuration ++ * @rate: Configured interface rate (in bits per second) ++ * @enabled: Indicates if interface is enabled ++ * @accept_frame_type: Indicates type of accepted frames for the interface ++ */ ++struct dpdmux_if_attr { ++ uint32_t rate; ++ int enabled; ++ enum dpdmux_accepted_frames_type accept_frame_type; ++}; ++ ++/** ++ * dpdmux_if_get_attributes() - Obtain DPDMUX interface attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @if_id: Interface ID (0 for uplink, or 1-num_ifs); ++ * @attr: Interface attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_if_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpdmux_if_attr *attr); ++ ++/** ++ * struct dpdmux_l2_rule - Structure representing L2 rule ++ * @mac_addr: MAC address ++ * @vlan_id: VLAN ID ++ */ ++struct dpdmux_l2_rule { ++ uint8_t mac_addr[6]; ++ uint16_t vlan_id; ++}; ++ ++/** ++ * dpdmux_if_remove_l2_rule() - Remove L2 rule from DPDMUX table ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @if_id: Destination interface ID ++ * @rule: L2 rule ++ * ++ * Function removes a L2 rule from DPDMUX table ++ * or adds an interface to an existing multicast address ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_if_remove_l2_rule(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpdmux_l2_rule *rule); ++ ++/** ++ * dpdmux_if_add_l2_rule() - Add L2 rule into DPDMUX table ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPDMUX object ++ * @if_id: Destination interface ID ++ * @rule: L2 rule ++ * ++ * Function adds a L2 rule into DPDMUX table ++ * or adds an interface to an existing multicast address ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_if_add_l2_rule(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpdmux_l2_rule *rule); ++ ++/** ++* dpdmux_if_get_counter() - Functions obtains specific counter of an interface ++* @mc_io: Pointer to MC portal's I/O object ++* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++* @token: Token of DPDMUX object ++* @if_id: Interface Id ++* @counter_type: counter type ++* @counter: Returned specific counter information ++* ++* Return: '0' on Success; Error code otherwise. ++*/ ++int dpdmux_if_get_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ enum dpdmux_counter_type counter_type, ++ uint64_t *counter); ++ ++/** ++* dpdmux_ul_reset_counters() - Function resets the uplink counter ++* @mc_io: Pointer to MC portal's I/O object ++* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++* @token: Token of DPDMUX object ++* ++* Return: '0' on Success; Error code otherwise. ++*/ ++int dpdmux_ul_reset_counters(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * Enable auto-negotiation ++ */ ++#define DPDMUX_LINK_OPT_AUTONEG 0x0000000000000001ULL ++/** ++ * Enable half-duplex mode ++ */ ++#define DPDMUX_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL ++/** ++ * Enable pause frames ++ */ ++#define DPDMUX_LINK_OPT_PAUSE 0x0000000000000004ULL ++/** ++ * Enable a-symmetric pause frames ++ */ ++#define DPDMUX_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL ++ ++/** ++ * struct dpdmux_link_cfg - Structure representing DPDMUX link configuration ++ * @rate: Rate ++ * @options: Mask of available options; use 'DPDMUX_LINK_OPT_' values ++ */ ++struct dpdmux_link_cfg { ++ uint32_t rate; ++ uint64_t options; ++}; ++ ++/** ++ * dpdmux_if_set_link_cfg() - set the link configuration. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: interface id ++ * @cfg: Link configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpdmux_if_set_link_cfg(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpdmux_link_cfg *cfg); ++/** ++ * struct dpdmux_link_state - Structure representing DPDMUX link state ++ * @rate: Rate ++ * @options: Mask of available options; use 'DPDMUX_LINK_OPT_' values ++ * @up: 0 - down, 1 - up ++ */ ++struct dpdmux_link_state { ++ uint32_t rate; ++ uint64_t options; ++ int up; ++}; ++ ++/** ++ * dpdmux_if_get_link_state - Return the link state ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: interface id ++ * @state: link state ++ * ++ * @returns '0' on Success; Error code otherwise. ++ */ ++int dpdmux_if_get_link_state(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpdmux_link_state *state); ++ ++#endif /* __FSL_DPDMUX_H */ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/evb/evb.c +@@ -0,0 +1,1216 @@ ++/* Copyright 2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "../../fsl-mc/include/mc.h" ++ ++#include "dpdmux.h" ++#include "dpdmux-cmd.h" ++ ++/* IRQ index */ ++#define DPDMUX_MAX_IRQ_NUM 2 ++ ++/* MAX FRAME LENGTH (currently 10k) */ ++#define EVB_MAX_FRAME_LENGTH (10 * 1024) ++/* MIN FRAME LENGTH (64 bytes + 4 bytes CRC) */ ++#define EVB_MIN_FRAME_LENGTH 68 ++ ++struct evb_port_priv { ++ struct net_device *netdev; ++ struct list_head list; ++ u16 port_index; ++ struct evb_priv *evb_priv; ++ u8 vlans[VLAN_VID_MASK+1]; ++}; ++ ++struct evb_priv { ++ /* keep first */ ++ struct evb_port_priv uplink; ++ ++ struct fsl_mc_io *mc_io; ++ struct list_head port_list; ++ struct dpdmux_attr attr; ++ uint16_t mux_handle; ++ int dev_id; ++}; ++ ++static int _evb_port_carrier_state_sync(struct net_device *netdev) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ struct dpdmux_link_state state; ++ int err; ++ ++ err = dpdmux_if_get_link_state(port_priv->evb_priv->mc_io, 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, &state); ++ if (unlikely(err)) { ++ netdev_err(netdev, "dpdmux_if_get_link_state() err %d\n", err); ++ return err; ++ } ++ ++ WARN_ONCE(state.up > 1, "Garbage read into link_state"); ++ ++ if (state.up) ++ netif_carrier_on(port_priv->netdev); ++ else ++ netif_carrier_off(port_priv->netdev); ++ ++ return 0; ++} ++ ++static int evb_port_open(struct net_device *netdev) ++{ ++ int err; ++ ++ /* FIXME: enable port when support added */ ++ ++ err = _evb_port_carrier_state_sync(netdev); ++ if (err) { ++ netdev_err(netdev, "ethsw_port_carrier_state_sync err %d\n", ++ err); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static netdev_tx_t evb_dropframe(struct sk_buff *skb, struct net_device *dev) ++{ ++ /* we don't support I/O for now, drop the frame */ ++ dev_kfree_skb_any(skb); ++ return NETDEV_TX_OK; ++} ++ ++static int evb_links_state_update(struct evb_priv *priv) ++{ ++ struct evb_port_priv *port_priv; ++ struct list_head *pos; ++ int err; ++ ++ list_for_each(pos, &priv->port_list) { ++ port_priv = list_entry(pos, struct evb_port_priv, list); ++ ++ err = _evb_port_carrier_state_sync(port_priv->netdev); ++ if (err) ++ netdev_err(port_priv->netdev, ++ "_evb_port_carrier_state_sync err %d\n", ++ err); ++ } ++ ++ return 0; ++} ++ ++static irqreturn_t evb_irq0_handler(int irq_num, void *arg) ++{ ++ return IRQ_WAKE_THREAD; ++} ++ ++static irqreturn_t _evb_irq0_handler_thread(int irq_num, void *arg) ++{ ++ struct device *dev = (struct device *)arg; ++ struct fsl_mc_device *evb_dev = to_fsl_mc_device(dev); ++ struct net_device *netdev = dev_get_drvdata(dev); ++ struct evb_priv *priv = netdev_priv(netdev); ++ struct fsl_mc_io *io = priv->mc_io; ++ uint16_t token = priv->mux_handle; ++ int irq_index = DPDMUX_IRQ_INDEX_IF; ++ uint32_t status = 0, clear = 0; ++ int err; ++ ++ /* Sanity check */ ++ if (WARN_ON(!evb_dev || !evb_dev->irqs || !evb_dev->irqs[irq_index])) ++ goto out; ++ if (WARN_ON(evb_dev->irqs[irq_index]->msi_desc->irq != irq_num)) ++ goto out; ++ ++ err = dpdmux_get_irq_status(io, 0, token, irq_index, &status); ++ if (unlikely(err)) { ++ netdev_err(netdev, "Can't get irq status (err %d)", err); ++ clear = 0xffffffff; ++ goto out; ++ } ++ ++ /* FIXME clear irq status */ ++ ++ if (status & DPDMUX_IRQ_EVENT_LINK_CHANGED) { ++ clear |= DPDMUX_IRQ_EVENT_LINK_CHANGED; ++ ++ err = evb_links_state_update(priv); ++ if (unlikely(err)) ++ goto out; ++ } ++out: ++ err = dpdmux_clear_irq_status(io, 0, token, irq_index, clear); ++ if (unlikely(err)) ++ netdev_err(netdev, "Can't clear irq status (err %d)", err); ++ return IRQ_HANDLED; ++} ++ ++static int evb_setup_irqs(struct fsl_mc_device *evb_dev) ++{ ++ struct device *dev = &evb_dev->dev; ++ struct net_device *netdev = dev_get_drvdata(dev); ++ struct evb_priv *priv = netdev_priv(netdev); ++ int err = 0; ++ struct fsl_mc_device_irq *irq; ++ const int irq_index = DPDMUX_IRQ_INDEX_IF; ++ uint32_t mask = ~0x0u; /* FIXME: unmask handled irqs */ ++ ++ err = fsl_mc_allocate_irqs(evb_dev); ++ if (unlikely(err)) { ++ dev_err(dev, "MC irqs allocation failed\n"); ++ return err; ++ } ++ ++ if (WARN_ON(evb_dev->obj_desc.irq_count != DPDMUX_MAX_IRQ_NUM)) { ++ err = -EINVAL; ++ goto free_irq; ++ } ++ ++ err = dpdmux_set_irq_enable(priv->mc_io, 0, priv->mux_handle, ++ irq_index, 0); ++ if (unlikely(err)) { ++ dev_err(dev, "dpdmux_set_irq_enable err %d\n", err); ++ goto free_irq; ++ } ++ ++ irq = evb_dev->irqs[irq_index]; ++ ++ err = devm_request_threaded_irq(dev, irq->msi_desc->irq, ++ evb_irq0_handler, ++ _evb_irq0_handler_thread, ++ IRQF_NO_SUSPEND | IRQF_ONESHOT, ++ dev_name(dev), dev); ++ if (unlikely(err)) { ++ dev_err(dev, "devm_request_threaded_irq(): %d", err); ++ goto free_irq; ++ } ++ ++ err = dpdmux_set_irq_mask(priv->mc_io, 0, priv->mux_handle, ++ irq_index, mask); ++ if (unlikely(err)) { ++ dev_err(dev, "dpdmux_set_irq_mask(): %d", err); ++ goto free_devm_irq; ++ } ++ ++ err = dpdmux_set_irq_enable(priv->mc_io, 0, priv->mux_handle, ++ irq_index, 1); ++ if (unlikely(err)) { ++ dev_err(dev, "dpdmux_set_irq_enable(): %d", err); ++ goto free_devm_irq; ++ } ++ ++ return 0; ++ ++free_devm_irq: ++ devm_free_irq(dev, irq->msi_desc->irq, dev); ++free_irq: ++ fsl_mc_free_irqs(evb_dev); ++ return err; ++} ++ ++static void evb_teardown_irqs(struct fsl_mc_device *evb_dev) ++{ ++ struct device *dev = &evb_dev->dev; ++ struct net_device *netdev = dev_get_drvdata(dev); ++ struct evb_priv *priv = netdev_priv(netdev); ++ ++ dpdmux_set_irq_enable(priv->mc_io, 0, priv->mux_handle, ++ DPDMUX_IRQ_INDEX_IF, 0); ++ ++ devm_free_irq(dev, ++ evb_dev->irqs[DPDMUX_IRQ_INDEX_IF]->msi_desc->irq, ++ dev); ++ fsl_mc_free_irqs(evb_dev); ++} ++ ++static int evb_port_add_rule(struct net_device *netdev, ++ const unsigned char *addr, u16 vid) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ struct dpdmux_l2_rule rule = { .vlan_id = vid }; ++ int err; ++ ++ if (addr) ++ ether_addr_copy(rule.mac_addr, addr); ++ ++ err = dpdmux_if_add_l2_rule(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, &rule); ++ if (unlikely(err)) ++ netdev_err(netdev, "dpdmux_if_add_l2_rule err %d\n", err); ++ return err; ++} ++ ++static int evb_port_del_rule(struct net_device *netdev, ++ const unsigned char *addr, u16 vid) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ struct dpdmux_l2_rule rule = { .vlan_id = vid }; ++ int err; ++ ++ if (addr) ++ ether_addr_copy(rule.mac_addr, addr); ++ ++ err = dpdmux_if_remove_l2_rule(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, &rule); ++ if (unlikely(err)) ++ netdev_err(netdev, "dpdmux_if_remove_l2_rule err %d\n", err); ++ return err; ++} ++ ++static bool _lookup_address(struct net_device *netdev, ++ const unsigned char *addr) ++{ ++ struct netdev_hw_addr *ha; ++ struct netdev_hw_addr_list *list = (is_unicast_ether_addr(addr)) ? ++ &netdev->uc : &netdev->mc; ++ ++ netif_addr_lock_bh(netdev); ++ list_for_each_entry(ha, &list->list, list) { ++ if (ether_addr_equal(ha->addr, addr)) { ++ netif_addr_unlock_bh(netdev); ++ return true; ++ } ++ } ++ netif_addr_unlock_bh(netdev); ++ return false; ++} ++ ++static inline int evb_port_fdb_prep(struct nlattr *tb[], ++ struct net_device *netdev, ++ const unsigned char *addr, u16 *vid, ++ bool del) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ struct evb_priv *evb_priv = port_priv->evb_priv; ++ ++ *vid = 0; ++ ++ if (evb_priv->attr.method != DPDMUX_METHOD_MAC && ++ evb_priv->attr.method != DPDMUX_METHOD_C_VLAN_MAC) { ++ netdev_err(netdev, ++ "EVB mode does not support MAC classification\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ /* check if the address is configured on this port */ ++ if (_lookup_address(netdev, addr)) { ++ if (!del) ++ return -EEXIST; ++ } else { ++ if (del) ++ return -ENOENT; ++ } ++ ++ if (tb[NDA_VLAN] && evb_priv->attr.method == DPDMUX_METHOD_C_VLAN_MAC) { ++ if (nla_len(tb[NDA_VLAN]) != sizeof(unsigned short)) { ++ netdev_err(netdev, "invalid vlan size %d\n", ++ nla_len(tb[NDA_VLAN])); ++ return -EINVAL; ++ } ++ ++ *vid = nla_get_u16(tb[NDA_VLAN]); ++ ++ if (!*vid || *vid >= VLAN_VID_MASK) { ++ netdev_err(netdev, "invalid vid value 0x%04x\n", *vid); ++ return -EINVAL; ++ } ++ } else if (evb_priv->attr.method == DPDMUX_METHOD_C_VLAN_MAC) { ++ netdev_err(netdev, ++ "EVB mode requires explicit VLAN configuration\n"); ++ return -EINVAL; ++ } else if (tb[NDA_VLAN]) { ++ netdev_warn(netdev, "VLAN not supported, argument ignored\n"); ++ } ++ ++ return 0; ++} ++ ++static int evb_port_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], ++ struct net_device *netdev, ++ const unsigned char *addr, u16 vid, u16 flags) ++{ ++ u16 _vid; ++ int err; ++ ++ /* TODO: add replace support when added to iproute bridge */ ++ if (!(flags & NLM_F_REQUEST)) { ++ netdev_err(netdev, ++ "evb_port_fdb_add unexpected flags value %08x\n", ++ flags); ++ return -EINVAL; ++ } ++ ++ err = evb_port_fdb_prep(tb, netdev, addr, &_vid, 0); ++ if (unlikely(err)) ++ return err; ++ ++ ++ err = evb_port_add_rule(netdev, addr, _vid); ++ if (unlikely(err)) ++ return err; ++ ++ if (is_unicast_ether_addr(addr)) { ++ err = dev_uc_add(netdev, addr); ++ if (unlikely(err)) { ++ netdev_err(netdev, "dev_uc_add err %d\n", err); ++ return err; ++ } ++ } else { ++ err = dev_mc_add(netdev, addr); ++ if (unlikely(err)) { ++ netdev_err(netdev, "dev_mc_add err %d\n", err); ++ return err; ++ } ++ } ++ ++ return 0; ++} ++ ++static int evb_port_fdb_del(struct ndmsg *ndm, struct nlattr *tb[], ++ struct net_device *netdev, ++ const unsigned char *addr, u16 vid) ++{ ++ u16 _vid; ++ int err; ++ ++ err = evb_port_fdb_prep(tb, netdev, addr, &_vid, 1); ++ if (unlikely(err)) ++ return err; ++ ++ err = evb_port_del_rule(netdev, addr, _vid); ++ if (unlikely(err)) ++ return err; ++ ++ if (is_unicast_ether_addr(addr)) { ++ err = dev_uc_del(netdev, addr); ++ if (unlikely(err)) { ++ netdev_err(netdev, "dev_uc_del err %d\n", err); ++ return err; ++ } ++ } else { ++ err = dev_mc_del(netdev, addr); ++ if (unlikely(err)) { ++ netdev_err(netdev, "dev_mc_del err %d\n", err); ++ return err; ++ } ++ } ++ ++ return 0; ++} ++ ++static int evb_change_mtu(struct net_device *netdev, ++ int mtu) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ struct evb_priv *evb_priv = port_priv->evb_priv; ++ struct list_head *pos; ++ int err = 0; ++ ++ /* This operation is not permitted on downlinks */ ++ if (port_priv->port_index > 0) ++ return -EPERM; ++ ++ if (mtu < EVB_MIN_FRAME_LENGTH || mtu > EVB_MAX_FRAME_LENGTH) { ++ netdev_err(netdev, "Invalid MTU %d. Valid range is: %d..%d\n", ++ mtu, EVB_MIN_FRAME_LENGTH, EVB_MAX_FRAME_LENGTH); ++ return -EINVAL; ++ } ++ ++ err = dpdmux_ul_set_max_frame_length(evb_priv->mc_io, ++ 0, ++ evb_priv->mux_handle, ++ (uint16_t)mtu); ++ ++ if (unlikely(err)) { ++ netdev_err(netdev, "dpdmux_ul_set_max_frame_length err %d\n", ++ err); ++ return err; ++ } ++ ++ /* Update the max frame length for downlinks */ ++ list_for_each(pos, &evb_priv->port_list) { ++ port_priv = list_entry(pos, struct evb_port_priv, list); ++ port_priv->netdev->mtu = mtu; ++ } ++ ++ netdev->mtu = mtu; ++ return 0; ++} ++ ++static const struct nla_policy ifla_br_policy[IFLA_MAX+1] = { ++ [IFLA_BRIDGE_FLAGS] = { .type = NLA_U16 }, ++ [IFLA_BRIDGE_MODE] = { .type = NLA_U16 }, ++ [IFLA_BRIDGE_VLAN_INFO] = { .type = NLA_BINARY, ++ .len = sizeof(struct bridge_vlan_info), }, ++}; ++ ++static int evb_setlink_af_spec(struct net_device *netdev, ++ struct nlattr **tb) ++{ ++ struct bridge_vlan_info *vinfo; ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ int err = 0; ++ ++ if (!tb[IFLA_BRIDGE_VLAN_INFO]) { ++ netdev_err(netdev, "no VLAN INFO in nlmsg\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ vinfo = nla_data(tb[IFLA_BRIDGE_VLAN_INFO]); ++ ++ if (!vinfo->vid || vinfo->vid > VLAN_VID_MASK) ++ return -EINVAL; ++ ++ err = evb_port_add_rule(netdev, NULL, vinfo->vid); ++ if (unlikely(err)) ++ return err; ++ ++ port_priv->vlans[vinfo->vid] = 1; ++ ++ return 0; ++} ++ ++static int evb_setlink(struct net_device *netdev, ++ struct nlmsghdr *nlh, ++ u16 flags) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ struct evb_priv *evb_priv = port_priv->evb_priv; ++ struct nlattr *attr; ++ struct nlattr *tb[(IFLA_BRIDGE_MAX > IFLA_BRPORT_MAX) ? ++ IFLA_BRIDGE_MAX : IFLA_BRPORT_MAX+1]; ++ int err = 0; ++ ++ if (evb_priv->attr.method != DPDMUX_METHOD_C_VLAN && ++ evb_priv->attr.method != DPDMUX_METHOD_S_VLAN) { ++ netdev_err(netdev, ++ "EVB mode does not support VLAN only classification\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ attr = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); ++ if (attr) { ++ err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, attr, ++ ifla_br_policy); ++ if (unlikely(err)) { ++ netdev_err(netdev, ++ "nla_parse_nested for br_policy err %d\n", ++ err); ++ return err; ++ } ++ ++ err = evb_setlink_af_spec(netdev, tb); ++ return err; ++ } ++ ++ netdev_err(netdev, "nlmsg_find_attr found no AF_SPEC\n"); ++ return -EOPNOTSUPP; ++} ++ ++static int __nla_put_netdev(struct sk_buff *skb, struct net_device *netdev) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ struct evb_priv *evb_priv = port_priv->evb_priv; ++ u8 operstate = netif_running(netdev) ? ++ netdev->operstate : IF_OPER_DOWN; ++ int iflink; ++ int err; ++ ++ err = nla_put_string(skb, IFLA_IFNAME, netdev->name); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u32(skb, IFLA_MASTER, evb_priv->uplink.netdev->ifindex); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u32(skb, IFLA_MTU, netdev->mtu); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_OPERSTATE, operstate); ++ if (unlikely(err)) ++ goto nla_put_err; ++ if (netdev->addr_len) { ++ err = nla_put(skb, IFLA_ADDRESS, netdev->addr_len, ++ netdev->dev_addr); ++ if (unlikely(err)) ++ goto nla_put_err; ++ } ++ ++ iflink = dev_get_iflink(netdev); ++ if (netdev->ifindex != iflink) { ++ err = nla_put_u32(skb, IFLA_LINK, iflink); ++ if (unlikely(err)) ++ goto nla_put_err; ++ } ++ ++ return 0; ++ ++nla_put_err: ++ netdev_err(netdev, "nla_put_ err %d\n", err); ++ return err; ++} ++ ++static int __nla_put_port(struct sk_buff *skb, struct net_device *netdev) ++{ ++ struct nlattr *nest; ++ int err; ++ ++ nest = nla_nest_start(skb, IFLA_PROTINFO | NLA_F_NESTED); ++ if (!nest) { ++ netdev_err(netdev, "nla_nest_start failed\n"); ++ return -ENOMEM; ++ } ++ ++ err = nla_put_u8(skb, IFLA_BRPORT_STATE, BR_STATE_FORWARDING); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u16(skb, IFLA_BRPORT_PRIORITY, 0); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u32(skb, IFLA_BRPORT_COST, 0); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_MODE, 0); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_GUARD, 0); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_PROTECT, 0); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_FAST_LEAVE, 0); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_LEARNING, 0); ++ if (unlikely(err)) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_UNICAST_FLOOD, 1); ++ if (unlikely(err)) ++ goto nla_put_err; ++ nla_nest_end(skb, nest); ++ ++ return 0; ++ ++nla_put_err: ++ netdev_err(netdev, "nla_put_ err %d\n", err); ++ nla_nest_cancel(skb, nest); ++ return err; ++} ++ ++static int __nla_put_vlan(struct sk_buff *skb, struct net_device *netdev) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ struct nlattr *nest; ++ struct bridge_vlan_info vinfo; ++ const u8 *vlans = port_priv->vlans; ++ u16 i; ++ int err; ++ ++ nest = nla_nest_start(skb, IFLA_AF_SPEC); ++ if (!nest) { ++ netdev_err(netdev, "nla_nest_start failed"); ++ return -ENOMEM; ++ } ++ ++ for (i = 0; i < VLAN_VID_MASK+1; i++) { ++ if (!vlans[i]) ++ continue; ++ ++ vinfo.flags = 0; ++ vinfo.vid = i; ++ ++ err = nla_put(skb, IFLA_BRIDGE_VLAN_INFO, ++ sizeof(vinfo), &vinfo); ++ if (unlikely(err)) ++ goto nla_put_err; ++ } ++ ++ nla_nest_end(skb, nest); ++ ++ return 0; ++ ++nla_put_err: ++ netdev_err(netdev, "nla_put_ err %d\n", err); ++ nla_nest_cancel(skb, nest); ++ return err; ++} ++ ++static int evb_getlink(struct sk_buff *skb, u32 pid, u32 seq, ++ struct net_device *netdev, u32 filter_mask, int nlflags) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ struct evb_priv *evb_priv = port_priv->evb_priv; ++ struct ifinfomsg *hdr; ++ struct nlmsghdr *nlh; ++ int err; ++ ++ if (evb_priv->attr.method != DPDMUX_METHOD_C_VLAN && ++ evb_priv->attr.method != DPDMUX_METHOD_S_VLAN) { ++ return 0; ++ } ++ ++ nlh = nlmsg_put(skb, pid, seq, RTM_NEWLINK, sizeof(*hdr), NLM_F_MULTI); ++ if (!nlh) ++ return -EMSGSIZE; ++ ++ hdr = nlmsg_data(nlh); ++ memset(hdr, 0, sizeof(*hdr)); ++ hdr->ifi_family = AF_BRIDGE; ++ hdr->ifi_type = netdev->type; ++ hdr->ifi_index = netdev->ifindex; ++ hdr->ifi_flags = dev_get_flags(netdev); ++ ++ err = __nla_put_netdev(skb, netdev); ++ if (unlikely(err)) ++ goto nla_put_err; ++ ++ err = __nla_put_port(skb, netdev); ++ if (unlikely(err)) ++ goto nla_put_err; ++ ++ /* Check if the VID information is requested */ ++ if (filter_mask & RTEXT_FILTER_BRVLAN) { ++ err = __nla_put_vlan(skb, netdev); ++ if (unlikely(err)) ++ goto nla_put_err; ++ } ++ ++ nlmsg_end(skb, nlh); ++ return skb->len; ++ ++nla_put_err: ++ nlmsg_cancel(skb, nlh); ++ return -EMSGSIZE; ++} ++ ++static int evb_dellink(struct net_device *netdev, ++ struct nlmsghdr *nlh, ++ u16 flags) ++{ ++ struct nlattr *tb[IFLA_BRIDGE_MAX+1]; ++ struct nlattr *spec; ++ struct bridge_vlan_info *vinfo; ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ int err = 0; ++ ++ spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); ++ if (!spec) ++ return 0; ++ ++ err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, spec, ifla_br_policy); ++ if (unlikely(err)) ++ return err; ++ ++ if (!tb[IFLA_BRIDGE_VLAN_INFO]) ++ return -EOPNOTSUPP; ++ ++ vinfo = nla_data(tb[IFLA_BRIDGE_VLAN_INFO]); ++ ++ if (!vinfo->vid || vinfo->vid > VLAN_VID_MASK) ++ return -EINVAL; ++ ++ err = evb_port_del_rule(netdev, NULL, vinfo->vid); ++ if (unlikely(err)) { ++ netdev_err(netdev, "evb_port_del_rule err %d\n", err); ++ return err; ++ } ++ port_priv->vlans[vinfo->vid] = 0; ++ ++ return 0; ++} ++ ++static struct rtnl_link_stats64 * ++evb_port_get_stats(struct net_device *netdev, ++ struct rtnl_link_stats64 *storage) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ u64 tmp; ++ int err; ++ ++ err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, ++ DPDMUX_CNT_ING_FRAME, &storage->rx_packets); ++ if (unlikely(err)) ++ goto error; ++ ++ err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, ++ DPDMUX_CNT_ING_BYTE, &storage->rx_bytes); ++ if (unlikely(err)) ++ goto error; ++ ++ err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, ++ DPDMUX_CNT_ING_FLTR_FRAME, &tmp); ++ if (unlikely(err)) ++ goto error; ++ ++ err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, ++ DPDMUX_CNT_ING_FRAME_DISCARD, ++ &storage->rx_dropped); ++ if (unlikely(err)) { ++ storage->rx_dropped = tmp; ++ goto error; ++ } ++ storage->rx_dropped += tmp; ++ ++ err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, ++ DPDMUX_CNT_ING_MCAST_FRAME, ++ &storage->multicast); ++ if (unlikely(err)) ++ goto error; ++ ++ err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, ++ DPDMUX_CNT_EGR_FRAME, &storage->tx_packets); ++ if (unlikely(err)) ++ goto error; ++ ++ err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, ++ DPDMUX_CNT_EGR_BYTE, &storage->tx_bytes); ++ if (unlikely(err)) ++ goto error; ++ ++ err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, ++ DPDMUX_CNT_EGR_FRAME_DISCARD, ++ &storage->tx_dropped); ++ if (unlikely(err)) ++ goto error; ++ ++ return storage; ++ ++error: ++ netdev_err(netdev, "dpdmux_if_get_counter err %d\n", err); ++ return storage; ++} ++ ++static const struct net_device_ops evb_port_ops = { ++ .ndo_open = &evb_port_open, ++ ++ .ndo_start_xmit = &evb_dropframe, ++ ++ .ndo_fdb_add = &evb_port_fdb_add, ++ .ndo_fdb_del = &evb_port_fdb_del, ++ ++ .ndo_get_stats64 = &evb_port_get_stats, ++ .ndo_change_mtu = &evb_change_mtu, ++}; ++ ++static struct { ++ enum dpdmux_counter_type id; ++ char name[ETH_GSTRING_LEN]; ++} evb_ethtool_counters[] = { ++ {DPDMUX_CNT_ING_FRAME, "rx frames"}, ++ {DPDMUX_CNT_ING_BYTE, "rx bytes"}, ++ {DPDMUX_CNT_ING_FLTR_FRAME, "rx filtered frames"}, ++ {DPDMUX_CNT_ING_FRAME_DISCARD, "rx discarded frames"}, ++ {DPDMUX_CNT_ING_BCAST_FRAME, "rx b-cast frames"}, ++ {DPDMUX_CNT_ING_BCAST_BYTES, "rx b-cast bytes"}, ++ {DPDMUX_CNT_ING_MCAST_FRAME, "rx m-cast frames"}, ++ {DPDMUX_CNT_ING_MCAST_BYTE, "rx m-cast bytes"}, ++ {DPDMUX_CNT_EGR_FRAME, "tx frames"}, ++ {DPDMUX_CNT_EGR_BYTE, "tx bytes"}, ++ {DPDMUX_CNT_EGR_FRAME_DISCARD, "tx discarded frames"}, ++}; ++ ++static int evb_ethtool_get_sset_count(struct net_device *dev, int sset) ++{ ++ switch (sset) { ++ case ETH_SS_STATS: ++ return ARRAY_SIZE(evb_ethtool_counters); ++ default: ++ return -EOPNOTSUPP; ++ } ++} ++ ++static void evb_ethtool_get_strings(struct net_device *netdev, ++ u32 stringset, u8 *data) ++{ ++ int i; ++ ++ switch (stringset) { ++ case ETH_SS_STATS: ++ for (i = 0; i < ARRAY_SIZE(evb_ethtool_counters); i++) ++ memcpy(data + i * ETH_GSTRING_LEN, ++ evb_ethtool_counters[i].name, ETH_GSTRING_LEN); ++ break; ++ } ++} ++ ++static void evb_ethtool_get_stats(struct net_device *netdev, ++ struct ethtool_stats *stats, ++ u64 *data) ++{ ++ struct evb_port_priv *port_priv = netdev_priv(netdev); ++ int i; ++ int err; ++ ++ for (i = 0; i < ARRAY_SIZE(evb_ethtool_counters); i++) { ++ err = dpdmux_if_get_counter(port_priv->evb_priv->mc_io, ++ 0, ++ port_priv->evb_priv->mux_handle, ++ port_priv->port_index, ++ evb_ethtool_counters[i].id, ++ &data[i]); ++ if (err) ++ netdev_err(netdev, "dpdmux_if_get_counter[%s] err %d\n", ++ evb_ethtool_counters[i].name, err); ++ } ++} ++ ++static const struct ethtool_ops evb_port_ethtool_ops = { ++ .get_strings = &evb_ethtool_get_strings, ++ .get_ethtool_stats = &evb_ethtool_get_stats, ++ .get_sset_count = &evb_ethtool_get_sset_count, ++}; ++ ++static int evb_open(struct net_device *netdev) ++{ ++ struct evb_priv *priv = netdev_priv(netdev); ++ int err = 0; ++ ++ err = dpdmux_enable(priv->mc_io, 0, priv->mux_handle); ++ if (unlikely(err)) ++ netdev_err(netdev, "dpdmux_enable err %d\n", err); ++ ++ return err; ++} ++ ++static int evb_close(struct net_device *netdev) ++{ ++ struct evb_priv *priv = netdev_priv(netdev); ++ int err = 0; ++ ++ err = dpdmux_disable(priv->mc_io, 0, priv->mux_handle); ++ if (unlikely(err)) ++ netdev_err(netdev, "dpdmux_disable err %d\n", err); ++ ++ return err; ++} ++ ++static const struct net_device_ops evb_ops = { ++ .ndo_start_xmit = &evb_dropframe, ++ .ndo_open = &evb_open, ++ .ndo_stop = &evb_close, ++ ++ .ndo_bridge_setlink = &evb_setlink, ++ .ndo_bridge_getlink = &evb_getlink, ++ .ndo_bridge_dellink = &evb_dellink, ++ ++ .ndo_get_stats64 = &evb_port_get_stats, ++ .ndo_change_mtu = &evb_change_mtu, ++}; ++ ++static int evb_takedown(struct fsl_mc_device *evb_dev) ++{ ++ struct device *dev = &evb_dev->dev; ++ struct net_device *netdev = dev_get_drvdata(dev); ++ struct evb_priv *priv = netdev_priv(netdev); ++ int err; ++ ++ err = dpdmux_close(priv->mc_io, 0, priv->mux_handle); ++ if (unlikely(err)) ++ dev_warn(dev, "dpdmux_close err %d\n", err); ++ ++ return 0; ++} ++ ++static int evb_init(struct fsl_mc_device *evb_dev) ++{ ++ struct device *dev = &evb_dev->dev; ++ struct net_device *netdev = dev_get_drvdata(dev); ++ struct evb_priv *priv = netdev_priv(netdev); ++ int err = 0; ++ ++ priv->dev_id = evb_dev->obj_desc.id; ++ ++ err = dpdmux_open(priv->mc_io, 0, priv->dev_id, &priv->mux_handle); ++ if (unlikely(err)) { ++ dev_err(dev, "dpdmux_open err %d\n", err); ++ goto err_exit; ++ } ++ if (!priv->mux_handle) { ++ dev_err(dev, "dpdmux_open returned null handle but no error\n"); ++ err = -EFAULT; ++ goto err_exit; ++ } ++ ++ err = dpdmux_get_attributes(priv->mc_io, 0, priv->mux_handle, ++ &priv->attr); ++ if (unlikely(err)) { ++ dev_err(dev, "dpdmux_get_attributes err %d\n", err); ++ goto err_close; ++ } ++ ++ err = dpdmux_reset(priv->mc_io, 0, priv->mux_handle); ++ if (unlikely(err)) { ++ dev_err(dev, "dpdmux_reset err %d\n", err); ++ goto err_close; ++ } ++ ++ return 0; ++ ++err_close: ++ dpdmux_close(priv->mc_io, 0, priv->mux_handle); ++err_exit: ++ return err; ++} ++ ++static int evb_remove(struct fsl_mc_device *evb_dev) ++{ ++ struct device *dev = &evb_dev->dev; ++ struct net_device *netdev = dev_get_drvdata(dev); ++ struct evb_priv *priv = netdev_priv(netdev); ++ struct evb_port_priv *port_priv; ++ struct list_head *pos; ++ ++ list_for_each(pos, &priv->port_list) { ++ port_priv = list_entry(pos, struct evb_port_priv, list); ++ ++ rtnl_lock(); ++ netdev_upper_dev_unlink(port_priv->netdev, netdev); ++ rtnl_unlock(); ++ ++ unregister_netdev(port_priv->netdev); ++ free_netdev(port_priv->netdev); ++ } ++ ++ evb_teardown_irqs(evb_dev); ++ ++ unregister_netdev(netdev); ++ ++ evb_takedown(evb_dev); ++ fsl_mc_portal_free(priv->mc_io); ++ ++ dev_set_drvdata(dev, NULL); ++ free_netdev(netdev); ++ ++ return 0; ++} ++ ++static int evb_probe(struct fsl_mc_device *evb_dev) ++{ ++ struct device *dev; ++ struct evb_priv *priv = NULL; ++ struct net_device *netdev = NULL; ++ char port_name[IFNAMSIZ]; ++ int i; ++ int err = 0; ++ ++ dev = &evb_dev->dev; ++ ++ /* register switch device, it's for management only - no I/O */ ++ netdev = alloc_etherdev(sizeof(*priv)); ++ if (!netdev) { ++ dev_err(dev, "alloc_etherdev error\n"); ++ return -ENOMEM; ++ } ++ netdev->netdev_ops = &evb_ops; ++ ++ dev_set_drvdata(dev, netdev); ++ ++ priv = netdev_priv(netdev); ++ ++ err = fsl_mc_portal_allocate(evb_dev, 0, &priv->mc_io); ++ if (unlikely(err)) { ++ dev_err(dev, "fsl_mc_portal_allocate err %d\n", err); ++ goto err_free_netdev; ++ } ++ if (!priv->mc_io) { ++ dev_err(dev, "fsl_mc_portal_allocate returned null handle but no error\n"); ++ err = -EFAULT; ++ goto err_free_netdev; ++ } ++ ++ err = evb_init(evb_dev); ++ if (unlikely(err)) { ++ dev_err(dev, "evb init err %d\n", err); ++ goto err_free_cmdport; ++ } ++ ++ INIT_LIST_HEAD(&priv->port_list); ++ netdev->flags |= IFF_PROMISC | IFF_MASTER; ++ ++ dev_alloc_name(netdev, "evb%d"); ++ ++ /* register switch ports */ ++ snprintf(port_name, IFNAMSIZ, "%sp%%d", netdev->name); ++ ++ /* only register downlinks? */ ++ for (i = 0; i < priv->attr.num_ifs + 1; i++) { ++ struct net_device *port_netdev; ++ struct evb_port_priv *port_priv; ++ ++ if (i) { ++ port_netdev = ++ alloc_etherdev(sizeof(struct evb_port_priv)); ++ if (!port_netdev) { ++ dev_err(dev, "alloc_etherdev error\n"); ++ goto err_takedown; ++ } ++ ++ port_priv = netdev_priv(port_netdev); ++ ++ port_netdev->flags |= IFF_PROMISC | IFF_SLAVE; ++ ++ dev_alloc_name(port_netdev, port_name); ++ } else { ++ port_netdev = netdev; ++ port_priv = &priv->uplink; ++ } ++ ++ port_priv->netdev = port_netdev; ++ port_priv->evb_priv = priv; ++ port_priv->port_index = i; ++ ++ SET_NETDEV_DEV(port_netdev, dev); ++ ++ if (i) { ++ port_netdev->netdev_ops = &evb_port_ops; ++ ++ err = register_netdev(port_netdev); ++ if (err < 0) { ++ dev_err(dev, "register_netdev err %d\n", err); ++ free_netdev(port_netdev); ++ goto err_takedown; ++ } ++ ++ rtnl_lock(); ++ err = netdev_master_upper_dev_link(port_netdev, netdev, NULL, NULL); ++ if (unlikely(err)) { ++ dev_err(dev, "netdev_master_upper_dev_link err %d\n", ++ err); ++ unregister_netdev(port_netdev); ++ free_netdev(port_netdev); ++ rtnl_unlock(); ++ goto err_takedown; ++ } ++ rtmsg_ifinfo(RTM_NEWLINK, port_netdev, ++ IFF_SLAVE, GFP_KERNEL); ++ rtnl_unlock(); ++ ++ list_add(&(port_priv->list), &(priv->port_list)); ++ } else { ++ err = register_netdev(netdev); ++ ++ if (err < 0) { ++ dev_err(dev, "register_netdev error %d\n", err); ++ goto err_takedown; ++ } ++ } ++ ++ port_netdev->ethtool_ops = &evb_port_ethtool_ops; ++ ++ /* ports are up from init */ ++ rtnl_lock(); ++ err = dev_open(port_netdev); ++ rtnl_unlock(); ++ if (unlikely(err)) ++ dev_warn(dev, "dev_open err %d\n", err); ++ } ++ ++ /* setup irqs */ ++ err = evb_setup_irqs(evb_dev); ++ if (unlikely(err)) { ++ dev_warn(dev, "evb_setup_irqs err %d\n", err); ++ goto err_takedown; ++ } ++ ++ dev_info(dev, "probed evb device with %d ports\n", ++ priv->attr.num_ifs); ++ return 0; ++ ++err_takedown: ++ evb_remove(evb_dev); ++err_free_cmdport: ++ fsl_mc_portal_free(priv->mc_io); ++err_free_netdev: ++ return err; ++} ++ ++static const struct fsl_mc_device_match_id evb_match_id_table[] = { ++ { ++ .vendor = FSL_MC_VENDOR_FREESCALE, ++ .obj_type = "dpdmux", ++ .ver_major = DPDMUX_VER_MAJOR, ++ .ver_minor = DPDMUX_VER_MINOR, ++ }, ++ {} ++}; ++ ++static struct fsl_mc_driver evb_drv = { ++ .driver = { ++ .name = KBUILD_MODNAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = evb_probe, ++ .remove = evb_remove, ++ .match_id_table = evb_match_id_table, ++}; ++ ++module_fsl_mc_driver(evb_drv); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Layerscape DPAA Edge Virtual Bridge driver (prototype)"); diff --git a/target/linux/layerscape/patches-4.4/7216-dpaa2-evb-Fix-interrupt-handling.patch b/target/linux/layerscape/patches-4.4/7216-dpaa2-evb-Fix-interrupt-handling.patch new file mode 100644 index 0000000000..d3d976af98 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7216-dpaa2-evb-Fix-interrupt-handling.patch @@ -0,0 +1,69 @@ +From 4efb592d8a931669df5df04bedcae8cbc85c3700 Mon Sep 17 00:00:00 2001 +From: Razvan Stefanescu +Date: Wed, 17 Feb 2016 16:31:01 +0200 +Subject: [PATCH 216/226] dpaa2-evb: Fix interrupt handling + +Mask only the events handled by the driver - DPDMUX_IRQ_EVENT_LINK_CHANGED. + +Use clear-on-read mechanism for the interrupt status and avoid calling +dpdmux_clear_irq_status(). Status contains the events handled (only link +state change for the moment) and masks the first 16-bits, as they are used +to store the interface ID that generated the event. + +Signed-off-by: Razvan Stefanescu +--- + drivers/staging/fsl-dpaa2/evb/evb.c | 20 ++++++++++---------- + 1 file changed, 10 insertions(+), 10 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/evb/evb.c ++++ b/drivers/staging/fsl-dpaa2/evb/evb.c +@@ -151,7 +151,9 @@ static irqreturn_t _evb_irq0_handler_thr + struct fsl_mc_io *io = priv->mc_io; + uint16_t token = priv->mux_handle; + int irq_index = DPDMUX_IRQ_INDEX_IF; +- uint32_t status = 0, clear = 0; ++ ++ /* Mask the events and the if_id reserved bits to be cleared on read */ ++ uint32_t status = DPDMUX_IRQ_EVENT_LINK_CHANGED | 0xFFFF0000; + int err; + + /* Sanity check */ +@@ -163,23 +165,21 @@ static irqreturn_t _evb_irq0_handler_thr + err = dpdmux_get_irq_status(io, 0, token, irq_index, &status); + if (unlikely(err)) { + netdev_err(netdev, "Can't get irq status (err %d)", err); +- clear = 0xffffffff; ++ err = dpdmux_clear_irq_status(io, 0, token, irq_index, ++ 0xFFFFFFFF); ++ if (unlikely(err)) ++ netdev_err(netdev, "Can't clear irq status (err %d)", ++ err); + goto out; + } + +- /* FIXME clear irq status */ +- + if (status & DPDMUX_IRQ_EVENT_LINK_CHANGED) { +- clear |= DPDMUX_IRQ_EVENT_LINK_CHANGED; +- + err = evb_links_state_update(priv); + if (unlikely(err)) + goto out; + } ++ + out: +- err = dpdmux_clear_irq_status(io, 0, token, irq_index, clear); +- if (unlikely(err)) +- netdev_err(netdev, "Can't clear irq status (err %d)", err); + return IRQ_HANDLED; + } + +@@ -191,7 +191,7 @@ static int evb_setup_irqs(struct fsl_mc_ + int err = 0; + struct fsl_mc_device_irq *irq; + const int irq_index = DPDMUX_IRQ_INDEX_IF; +- uint32_t mask = ~0x0u; /* FIXME: unmask handled irqs */ ++ uint32_t mask = DPDMUX_IRQ_EVENT_LINK_CHANGED; + + err = fsl_mc_allocate_irqs(evb_dev); + if (unlikely(err)) { diff --git a/target/linux/layerscape/patches-4.4/7217-dpaa2-evb-Add-object-version-check.patch b/target/linux/layerscape/patches-4.4/7217-dpaa2-evb-Add-object-version-check.patch new file mode 100644 index 0000000000..13d61cfb5f --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7217-dpaa2-evb-Add-object-version-check.patch @@ -0,0 +1,43 @@ +From 213c59501bbd6da8c56e95f90f8a8c6af2682002 Mon Sep 17 00:00:00 2001 +From: Razvan Stefanescu +Date: Thu, 18 Feb 2016 10:54:40 +0200 +Subject: [PATCH 217/226] dpaa2-evb: Add object version check + +Abort probing if DPDMUX object version is smaller than required. + +Signed-off-by: Razvan Stefanescu +--- + drivers/staging/fsl-dpaa2/evb/evb.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/drivers/staging/fsl-dpaa2/evb/evb.c ++++ b/drivers/staging/fsl-dpaa2/evb/evb.c +@@ -44,6 +44,10 @@ + #include "dpdmux.h" + #include "dpdmux-cmd.h" + ++/* Minimal supported DPDMUX version */ ++#define DPDMUX_MIN_VER_MAJOR 5 ++#define DPDMUX_MIN_VER_MINOR 0 ++ + /* IRQ index */ + #define DPDMUX_MAX_IRQ_NUM 2 + +@@ -1004,6 +1008,17 @@ static int evb_init(struct fsl_mc_device + goto err_close; + } + ++ /* Minimum supported DPDMUX version check */ ++ if (priv->attr.version.major < DPDMUX_MIN_VER_MAJOR || ++ (priv->attr.version.major == DPDMUX_MIN_VER_MAJOR && ++ priv->attr.version.minor < DPDMUX_MIN_VER_MINOR)) { ++ dev_err(dev, "DPDMUX version %d.%d not supported. Use %d.%d or greater.\n", ++ priv->attr.version.major, priv->attr.version.minor, ++ DPDMUX_MIN_VER_MAJOR, DPDMUX_MIN_VER_MAJOR); ++ err = -ENOTSUPP; ++ goto err_close; ++ } ++ + err = dpdmux_reset(priv->mc_io, 0, priv->mux_handle); + if (unlikely(err)) { + dev_err(dev, "dpdmux_reset err %d\n", err); diff --git a/target/linux/layerscape/patches-4.4/7218-dpaa2-evb-Cosmetic-cleanup.patch b/target/linux/layerscape/patches-4.4/7218-dpaa2-evb-Cosmetic-cleanup.patch new file mode 100644 index 0000000000..54f77ab65c --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7218-dpaa2-evb-Cosmetic-cleanup.patch @@ -0,0 +1,20 @@ +From 54d026dafa1f7d17758615736123917cc4f3f203 Mon Sep 17 00:00:00 2001 +From: Mihai Caraman +Date: Tue, 5 Apr 2016 14:12:10 +0000 +Subject: [PATCH 218/226] dpaa2-evb: Cosmetic cleanup + +Replace obsolete terms. + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/evb/evb.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/fsl-dpaa2/evb/evb.c ++++ b/drivers/staging/fsl-dpaa2/evb/evb.c +@@ -1228,4 +1228,4 @@ static struct fsl_mc_driver evb_drv = { + module_fsl_mc_driver(evb_drv); + + MODULE_LICENSE("GPL"); +-MODULE_DESCRIPTION("Layerscape DPAA Edge Virtual Bridge driver (prototype)"); ++MODULE_DESCRIPTION("DPAA2 Edge Virtual Bridge driver (prototype)"); diff --git a/target/linux/layerscape/patches-4.4/7219-dpaa2-evb-match-id-cleanup.patch b/target/linux/layerscape/patches-4.4/7219-dpaa2-evb-match-id-cleanup.patch new file mode 100644 index 0000000000..be1ab1baf0 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7219-dpaa2-evb-match-id-cleanup.patch @@ -0,0 +1,26 @@ +From 744bd6494a51443c2a7d32ed76e94e4fc5bd2404 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Thu, 14 Jul 2016 17:32:23 -0500 +Subject: [PATCH 219/226] dpaa2-evb: match id cleanup + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/evb/evb.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/evb/evb.c ++++ b/drivers/staging/fsl-dpaa2/evb/evb.c +@@ -1205,12 +1205,10 @@ err_free_netdev: + return err; + } + +-static const struct fsl_mc_device_match_id evb_match_id_table[] = { ++static const struct fsl_mc_device_id evb_match_id_table[] = { + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dpdmux", +- .ver_major = DPDMUX_VER_MAJOR, +- .ver_minor = DPDMUX_VER_MINOR, + }, + {} + }; diff --git a/target/linux/layerscape/patches-4.4/7220-dpaa2-ethsw-Ethernet-Switch-driver.patch b/target/linux/layerscape/patches-4.4/7220-dpaa2-ethsw-Ethernet-Switch-driver.patch new file mode 100644 index 0000000000..067eb59a23 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7220-dpaa2-ethsw-Ethernet-Switch-driver.patch @@ -0,0 +1,6605 @@ +From 8df017d70c54ceafc99b7904785603c678a2e5c1 Mon Sep 17 00:00:00 2001 +From: Razvan Stefanescu +Date: Tue, 22 Sep 2015 11:36:34 +0300 +Subject: [PATCH 220/226] dpaa2-ethsw: Ethernet Switch driver + +This is a commit of the cummulative, squashed dpaa2-l2switch patches. +All the commit logs are preserved below. + +Signed-off-by: Stuart Yoder + +--------------------------------------------------------------------- + +dpaa2-ethsw: Ethernet Switch driver + +Initial support for DPAA2 L2 switch. The switch and all ports are +presented as network interfaces in linux (swX and swXpY). I/O +functionality is not available on these interfaces, they are exclusively +for management. + +Configuration is done using bridge tool. Supported commands are: +- fdb operations with unicast/multicast addresses +- vlan configuration +- setting STP state of ports +- flooding, learning control + +Offers support for retrieving port statistics via ethtool (or similar +applications). + +This patch contains the following patches squashed together: +staging: fsl-dpaa2: ethsw: ethernet switch driver +dpaa2-ethsw: Include by default in configuration +staging: fsl-dpaa2: ethsw: Rebasing onto kernel 4.0 +staging: fsl-mc: migrated remaining flibs for MC fw 8.0.0 +dpaa2-ethsw: Prefix driver name with dpaa2- +dpaa2-ethsw: Set carrier state on probe +dpaa2-ethsw: Add support for link state update + +These patches were initally submitted by: +Alex Marginean +J. German Rivera +Razvan Stefanescu + +and reviewed by Stuart Yoder + +Ported to linux-v4.1 by updating iflink usage and ndo_bridge_getlink() +parameters list update. + +Signed-off-by: Razvan Stefanescu +[Stuart: resolved minor merge conflicts] +Signed-off-by: Stuart Yoder + +dpaa2-ethsw: Update dpsw binary interface to 7.0 + +This corresponds to MC release 0.8.0. + +Signed-off-by: Razvan Stefanescu + +dpaa2-ethsw: Add object version check + +Abort probing if DPSW object version is smaller than required. + +Signed-off-by: Razvan Stefanescu + +dpaa2-ethsw: Fix interrupt handling + +Mask only the events handled by the driver - DPSW_IRQ_EVENT_LINK_CHANGED. + +Use clear-on-read mechanism for the interrupt status and avoid calling +dpsw_clear_irq_status(). Status contains the events handled (only link +state change for the moment) and masks the first 16-bits, as they are used +to store the interface ID that generated the event. + +Signed-off-by: Razvan Stefanescu + +dpaa2-ethsw: resolve compile issues on uprev to 4.5 + +-irq_number field no longer exists in fsl-mc interrupt + struct +-netdev_master_upper_dev_link() has 2 new parameters, which + are set to NULL for now + +Signed-off-by: Stuart Yoder +--- + MAINTAINERS | 6 + + drivers/staging/fsl-dpaa2/Kconfig | 1 + + drivers/staging/fsl-dpaa2/Makefile | 1 + + drivers/staging/fsl-dpaa2/ethsw/Kconfig | 7 + + drivers/staging/fsl-dpaa2/ethsw/Makefile | 10 + + drivers/staging/fsl-dpaa2/ethsw/dpsw-cmd.h | 916 ++++++++++++ + drivers/staging/fsl-dpaa2/ethsw/dpsw.c | 1639 +++++++++++++++++++++ + drivers/staging/fsl-dpaa2/ethsw/dpsw.h | 2164 ++++++++++++++++++++++++++++ + drivers/staging/fsl-dpaa2/ethsw/switch.c | 1711 ++++++++++++++++++++++ + drivers/staging/fsl-mc/include/net.h | 1 - + 10 files changed, 6455 insertions(+), 1 deletion(-) + create mode 100644 drivers/staging/fsl-dpaa2/ethsw/Kconfig + create mode 100644 drivers/staging/fsl-dpaa2/ethsw/Makefile + create mode 100644 drivers/staging/fsl-dpaa2/ethsw/dpsw-cmd.h + create mode 100644 drivers/staging/fsl-dpaa2/ethsw/dpsw.c + create mode 100644 drivers/staging/fsl-dpaa2/ethsw/dpsw.h + create mode 100644 drivers/staging/fsl-dpaa2/ethsw/switch.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -4554,6 +4554,12 @@ S: Maintained + F: drivers/staging/fsl-mc/bus/mc-ioctl.h + F: drivers/staging/fsl-mc/bus/mc-restool.c + ++FREESCALE DPAA2 ETHERNET SWITCH DRIVER ++M: Alex Marginean ++L: linux-kernel@vger.kernel.org ++S: Maintained ++F: drivers/staging/fsl-dpaa2/ethsw/ ++ + FREESCALE DPAA2 MAC/PHY INTERFACE DRIVER + M: Alex Marginean + L: linux-kernel@vger.kernel.org +--- a/drivers/staging/fsl-dpaa2/Kconfig ++++ b/drivers/staging/fsl-dpaa2/Kconfig +@@ -11,3 +11,4 @@ config FSL_DPAA2 + source "drivers/staging/fsl-dpaa2/ethernet/Kconfig" + source "drivers/staging/fsl-dpaa2/mac/Kconfig" + source "drivers/staging/fsl-dpaa2/evb/Kconfig" ++source "drivers/staging/fsl-dpaa2/ethsw/Kconfig" +--- a/drivers/staging/fsl-dpaa2/Makefile ++++ b/drivers/staging/fsl-dpaa2/Makefile +@@ -5,3 +5,4 @@ + obj-$(CONFIG_FSL_DPAA2_ETH) += ethernet/ + obj-$(CONFIG_FSL_DPAA2_MAC) += mac/ + obj-$(CONFIG_FSL_DPAA2_EVB) += evb/ ++obj-$(CONFIG_FSL_DPAA2_ETHSW) += ethsw/ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethsw/Kconfig +@@ -0,0 +1,7 @@ ++config FSL_DPAA2_ETHSW ++ tristate "DPAA2 Ethernet Switch" ++ depends on FSL_MC_BUS && FSL_DPAA2 && FSL_DPAA2_ETH ++ select FSL_DPAA2_MAC ++ default y ++ ---help--- ++ Prototype driver for DPAA2 Ethernet Switch. +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethsw/Makefile +@@ -0,0 +1,10 @@ ++ ++obj-$(CONFIG_FSL_DPAA2_ETHSW) += dpaa2-ethsw.o ++ ++dpaa2-ethsw-objs := switch.o dpsw.o ++ ++all: ++ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules ++ ++clean: ++ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethsw/dpsw-cmd.h +@@ -0,0 +1,916 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPSW_CMD_H ++#define __FSL_DPSW_CMD_H ++ ++/* DPSW Version */ ++#define DPSW_VER_MAJOR 7 ++#define DPSW_VER_MINOR 0 ++ ++/* Command IDs */ ++#define DPSW_CMDID_CLOSE 0x800 ++#define DPSW_CMDID_OPEN 0x802 ++#define DPSW_CMDID_CREATE 0x902 ++#define DPSW_CMDID_DESTROY 0x900 ++ ++#define DPSW_CMDID_ENABLE 0x002 ++#define DPSW_CMDID_DISABLE 0x003 ++#define DPSW_CMDID_GET_ATTR 0x004 ++#define DPSW_CMDID_RESET 0x005 ++#define DPSW_CMDID_IS_ENABLED 0x006 ++ ++#define DPSW_CMDID_SET_IRQ 0x010 ++#define DPSW_CMDID_GET_IRQ 0x011 ++#define DPSW_CMDID_SET_IRQ_ENABLE 0x012 ++#define DPSW_CMDID_GET_IRQ_ENABLE 0x013 ++#define DPSW_CMDID_SET_IRQ_MASK 0x014 ++#define DPSW_CMDID_GET_IRQ_MASK 0x015 ++#define DPSW_CMDID_GET_IRQ_STATUS 0x016 ++#define DPSW_CMDID_CLEAR_IRQ_STATUS 0x017 ++ ++#define DPSW_CMDID_SET_REFLECTION_IF 0x022 ++ ++#define DPSW_CMDID_ADD_CUSTOM_TPID 0x024 ++ ++#define DPSW_CMDID_REMOVE_CUSTOM_TPID 0x026 ++ ++#define DPSW_CMDID_IF_SET_TCI 0x030 ++#define DPSW_CMDID_IF_SET_STP 0x031 ++#define DPSW_CMDID_IF_SET_ACCEPTED_FRAMES 0x032 ++#define DPSW_CMDID_SET_IF_ACCEPT_ALL_VLAN 0x033 ++#define DPSW_CMDID_IF_GET_COUNTER 0x034 ++#define DPSW_CMDID_IF_SET_COUNTER 0x035 ++#define DPSW_CMDID_IF_SET_TX_SELECTION 0x036 ++#define DPSW_CMDID_IF_ADD_REFLECTION 0x037 ++#define DPSW_CMDID_IF_REMOVE_REFLECTION 0x038 ++#define DPSW_CMDID_IF_SET_FLOODING_METERING 0x039 ++#define DPSW_CMDID_IF_SET_METERING 0x03A ++#define DPSW_CMDID_IF_SET_EARLY_DROP 0x03B ++ ++#define DPSW_CMDID_IF_ENABLE 0x03D ++#define DPSW_CMDID_IF_DISABLE 0x03E ++ ++#define DPSW_CMDID_IF_GET_ATTR 0x042 ++ ++#define DPSW_CMDID_IF_SET_MAX_FRAME_LENGTH 0x044 ++#define DPSW_CMDID_IF_GET_MAX_FRAME_LENGTH 0x045 ++#define DPSW_CMDID_IF_GET_LINK_STATE 0x046 ++#define DPSW_CMDID_IF_SET_FLOODING 0x047 ++#define DPSW_CMDID_IF_SET_BROADCAST 0x048 ++#define DPSW_CMDID_IF_SET_MULTICAST 0x049 ++#define DPSW_CMDID_IF_GET_TCI 0x04A ++ ++#define DPSW_CMDID_IF_SET_LINK_CFG 0x04C ++ ++#define DPSW_CMDID_VLAN_ADD 0x060 ++#define DPSW_CMDID_VLAN_ADD_IF 0x061 ++#define DPSW_CMDID_VLAN_ADD_IF_UNTAGGED 0x062 ++#define DPSW_CMDID_VLAN_ADD_IF_FLOODING 0x063 ++#define DPSW_CMDID_VLAN_REMOVE_IF 0x064 ++#define DPSW_CMDID_VLAN_REMOVE_IF_UNTAGGED 0x065 ++#define DPSW_CMDID_VLAN_REMOVE_IF_FLOODING 0x066 ++#define DPSW_CMDID_VLAN_REMOVE 0x067 ++#define DPSW_CMDID_VLAN_GET_IF 0x068 ++#define DPSW_CMDID_VLAN_GET_IF_FLOODING 0x069 ++#define DPSW_CMDID_VLAN_GET_IF_UNTAGGED 0x06A ++#define DPSW_CMDID_VLAN_GET_ATTRIBUTES 0x06B ++ ++#define DPSW_CMDID_FDB_GET_MULTICAST 0x080 ++#define DPSW_CMDID_FDB_GET_UNICAST 0x081 ++#define DPSW_CMDID_FDB_ADD 0x082 ++#define DPSW_CMDID_FDB_REMOVE 0x083 ++#define DPSW_CMDID_FDB_ADD_UNICAST 0x084 ++#define DPSW_CMDID_FDB_REMOVE_UNICAST 0x085 ++#define DPSW_CMDID_FDB_ADD_MULTICAST 0x086 ++#define DPSW_CMDID_FDB_REMOVE_MULTICAST 0x087 ++#define DPSW_CMDID_FDB_SET_LEARNING_MODE 0x088 ++#define DPSW_CMDID_FDB_GET_ATTR 0x089 ++ ++#define DPSW_CMDID_ACL_ADD 0x090 ++#define DPSW_CMDID_ACL_REMOVE 0x091 ++#define DPSW_CMDID_ACL_ADD_ENTRY 0x092 ++#define DPSW_CMDID_ACL_REMOVE_ENTRY 0x093 ++#define DPSW_CMDID_ACL_ADD_IF 0x094 ++#define DPSW_CMDID_ACL_REMOVE_IF 0x095 ++#define DPSW_CMDID_ACL_GET_ATTR 0x096 ++ ++#define DPSW_CMDID_CTRL_IF_GET_ATTR 0x0A0 ++#define DPSW_CMDID_CTRL_IF_SET_POOLS 0x0A1 ++#define DPSW_CMDID_CTRL_IF_ENABLE 0x0A2 ++#define DPSW_CMDID_CTRL_IF_DISABLE 0x0A3 ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_OPEN(cmd, dpsw_id) \ ++ MC_CMD_OP(cmd, 0, 0, 32, int, dpsw_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_CREATE(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, cfg->num_ifs);\ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->adv.max_fdbs);\ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->adv.max_meters_per_if);\ ++ MC_CMD_OP(cmd, 0, 32, 4, enum dpsw_component_type, \ ++ cfg->adv.component_type);\ ++ MC_CMD_OP(cmd, 1, 0, 16, uint16_t, cfg->adv.max_vlans);\ ++ MC_CMD_OP(cmd, 1, 16, 16, uint16_t, cfg->adv.max_fdb_entries);\ ++ MC_CMD_OP(cmd, 1, 32, 16, uint16_t, cfg->adv.fdb_aging_time);\ ++ MC_CMD_OP(cmd, 1, 48, 16, uint16_t, cfg->adv.max_fdb_mc_groups);\ ++ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->adv.options);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_IS_ENABLED(cmd, en) \ ++ MC_RSP_OP(cmd, 0, 0, 1, int, en) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_SET_IRQ(cmd, irq_index, irq_cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, irq_index);\ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, irq_cfg->val);\ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\ ++ MC_CMD_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_GET_IRQ(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_GET_IRQ(cmd, type, irq_cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val); \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\ ++ MC_RSP_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \ ++ MC_RSP_OP(cmd, 2, 32, 32, int, type); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_SET_IRQ_ENABLE(cmd, irq_index, enable_state) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, enable_state); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_GET_IRQ_ENABLE(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_GET_IRQ_ENABLE(cmd, enable_state) \ ++ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, enable_state) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_SET_IRQ_MASK(cmd, irq_index, mask) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, mask); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_GET_IRQ_MASK(cmd, irq_index) \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_GET_IRQ_MASK(cmd, mask) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mask) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_GET_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_GET_IRQ_STATUS(cmd, status) \ ++ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, status) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status); \ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, attr->num_ifs);\ ++ MC_RSP_OP(cmd, 0, 16, 8, uint8_t, attr->max_fdbs);\ ++ MC_RSP_OP(cmd, 0, 24, 8, uint8_t, attr->num_fdbs);\ ++ MC_RSP_OP(cmd, 0, 32, 16, uint16_t, attr->max_vlans);\ ++ MC_RSP_OP(cmd, 0, 48, 16, uint16_t, attr->num_vlans);\ ++ MC_RSP_OP(cmd, 1, 0, 16, uint16_t, attr->version.major);\ ++ MC_RSP_OP(cmd, 1, 16, 16, uint16_t, attr->version.minor);\ ++ MC_RSP_OP(cmd, 1, 32, 16, uint16_t, attr->max_fdb_entries);\ ++ MC_RSP_OP(cmd, 1, 48, 16, uint16_t, attr->fdb_aging_time);\ ++ MC_RSP_OP(cmd, 2, 0, 32, int, attr->id);\ ++ MC_RSP_OP(cmd, 2, 32, 16, uint16_t, attr->mem_size);\ ++ MC_RSP_OP(cmd, 2, 48, 16, uint16_t, attr->max_fdb_mc_groups);\ ++ MC_RSP_OP(cmd, 3, 0, 64, uint64_t, attr->options);\ ++ MC_RSP_OP(cmd, 4, 0, 8, uint8_t, attr->max_meters_per_if);\ ++ MC_RSP_OP(cmd, 4, 8, 4, enum dpsw_component_type, \ ++ attr->component_type);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_SET_REFLECTION_IF(cmd, if_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_FLOODING(cmd, if_id, en) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 1, int, en);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_BROADCAST(cmd, if_id, en) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 1, int, en);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_MULTICAST(cmd, if_id, en) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 1, int, en);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_TCI(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 12, uint16_t, cfg->vlan_id);\ ++ MC_CMD_OP(cmd, 0, 28, 1, uint8_t, cfg->dei);\ ++ MC_CMD_OP(cmd, 0, 29, 3, uint8_t, cfg->pcp);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_GET_TCI(cmd, if_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_IF_GET_TCI(cmd, cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, cfg->vlan_id);\ ++ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, cfg->dei);\ ++ MC_RSP_OP(cmd, 0, 40, 8, uint8_t, cfg->pcp);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_STP(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->vlan_id);\ ++ MC_CMD_OP(cmd, 0, 32, 4, enum dpsw_stp_state, cfg->state);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_ACCEPTED_FRAMES(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 4, enum dpsw_accepted_frames, cfg->type);\ ++ MC_CMD_OP(cmd, 0, 20, 4, enum dpsw_action, cfg->unaccept_act);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_ACCEPT_ALL_VLAN(cmd, if_id, accept_all) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 1, int, accept_all);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_GET_COUNTER(cmd, if_id, type) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 5, enum dpsw_counter, type);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_IF_GET_COUNTER(cmd, counter) \ ++ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, counter) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_COUNTER(cmd, if_id, type, counter) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 5, enum dpsw_counter, type);\ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, counter);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_TX_SELECTION(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 3, enum dpsw_priority_selector, \ ++ cfg->priority_selector);\ ++ MC_CMD_OP(cmd, 1, 0, 8, uint8_t, cfg->tc_id[0]);\ ++ MC_CMD_OP(cmd, 1, 8, 8, uint8_t, cfg->tc_id[1]);\ ++ MC_CMD_OP(cmd, 1, 16, 8, uint8_t, cfg->tc_id[2]);\ ++ MC_CMD_OP(cmd, 1, 24, 8, uint8_t, cfg->tc_id[3]);\ ++ MC_CMD_OP(cmd, 1, 32, 8, uint8_t, cfg->tc_id[4]);\ ++ MC_CMD_OP(cmd, 1, 40, 8, uint8_t, cfg->tc_id[5]);\ ++ MC_CMD_OP(cmd, 1, 48, 8, uint8_t, cfg->tc_id[6]);\ ++ MC_CMD_OP(cmd, 1, 56, 8, uint8_t, cfg->tc_id[7]);\ ++ MC_CMD_OP(cmd, 2, 0, 16, uint16_t, cfg->tc_sched[0].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 2, 16, 4, enum dpsw_schedule_mode, \ ++ cfg->tc_sched[0].mode);\ ++ MC_CMD_OP(cmd, 2, 32, 16, uint16_t, cfg->tc_sched[1].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 2, 48, 4, enum dpsw_schedule_mode, \ ++ cfg->tc_sched[1].mode);\ ++ MC_CMD_OP(cmd, 3, 0, 16, uint16_t, cfg->tc_sched[2].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 3, 16, 4, enum dpsw_schedule_mode, \ ++ cfg->tc_sched[2].mode);\ ++ MC_CMD_OP(cmd, 3, 32, 16, uint16_t, cfg->tc_sched[3].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 3, 48, 4, enum dpsw_schedule_mode, \ ++ cfg->tc_sched[3].mode);\ ++ MC_CMD_OP(cmd, 4, 0, 16, uint16_t, cfg->tc_sched[4].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 4, 16, 4, enum dpsw_schedule_mode, \ ++ cfg->tc_sched[4].mode);\ ++ MC_CMD_OP(cmd, 4, 32, 16, uint16_t, cfg->tc_sched[5].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 4, 48, 4, enum dpsw_schedule_mode, \ ++ cfg->tc_sched[5].mode);\ ++ MC_CMD_OP(cmd, 5, 0, 16, uint16_t, cfg->tc_sched[6].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 5, 16, 4, enum dpsw_schedule_mode, \ ++ cfg->tc_sched[6].mode);\ ++ MC_CMD_OP(cmd, 5, 32, 16, uint16_t, cfg->tc_sched[7].delta_bandwidth);\ ++ MC_CMD_OP(cmd, 5, 48, 4, enum dpsw_schedule_mode, \ ++ cfg->tc_sched[7].mode);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_ADD_REFLECTION(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->vlan_id);\ ++ MC_CMD_OP(cmd, 0, 32, 2, enum dpsw_reflection_filter, cfg->filter);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_REMOVE_REFLECTION(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->vlan_id);\ ++ MC_CMD_OP(cmd, 0, 32, 2, enum dpsw_reflection_filter, cfg->filter);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_FLOODING_METERING(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 24, 4, enum dpsw_metering_mode, cfg->mode);\ ++ MC_CMD_OP(cmd, 0, 28, 4, enum dpsw_metering_unit, cfg->units);\ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, cfg->cir);\ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->eir);\ ++ MC_CMD_OP(cmd, 1, 32, 32, uint32_t, cfg->cbs);\ ++ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->ebs);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_METERING(cmd, if_id, tc_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id);\ ++ MC_CMD_OP(cmd, 0, 24, 4, enum dpsw_metering_mode, cfg->mode);\ ++ MC_CMD_OP(cmd, 0, 28, 4, enum dpsw_metering_unit, cfg->units);\ ++ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, cfg->cir);\ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->eir);\ ++ MC_CMD_OP(cmd, 1, 32, 32, uint32_t, cfg->cbs);\ ++ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->ebs);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_PREP_EARLY_DROP(ext, cfg) \ ++do { \ ++ MC_PREP_OP(ext, 0, 0, 2, enum dpsw_early_drop_mode, cfg->drop_mode); \ ++ MC_PREP_OP(ext, 0, 2, 2, \ ++ enum dpsw_early_drop_unit, cfg->units); \ ++ MC_PREP_OP(ext, 0, 32, 32, uint32_t, cfg->tail_drop_threshold); \ ++ MC_PREP_OP(ext, 1, 0, 8, uint8_t, cfg->green.drop_probability); \ ++ MC_PREP_OP(ext, 2, 0, 64, uint64_t, cfg->green.max_threshold); \ ++ MC_PREP_OP(ext, 3, 0, 64, uint64_t, cfg->green.min_threshold); \ ++ MC_PREP_OP(ext, 5, 0, 8, uint8_t, cfg->yellow.drop_probability);\ ++ MC_PREP_OP(ext, 6, 0, 64, uint64_t, cfg->yellow.max_threshold); \ ++ MC_PREP_OP(ext, 7, 0, 64, uint64_t, cfg->yellow.min_threshold); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_EXT_EARLY_DROP(ext, cfg) \ ++do { \ ++ MC_EXT_OP(ext, 0, 0, 2, enum dpsw_early_drop_mode, cfg->drop_mode); \ ++ MC_EXT_OP(ext, 0, 2, 2, \ ++ enum dpsw_early_drop_unit, cfg->units); \ ++ MC_EXT_OP(ext, 0, 32, 32, uint32_t, cfg->tail_drop_threshold); \ ++ MC_EXT_OP(ext, 1, 0, 8, uint8_t, cfg->green.drop_probability); \ ++ MC_EXT_OP(ext, 2, 0, 64, uint64_t, cfg->green.max_threshold); \ ++ MC_EXT_OP(ext, 3, 0, 64, uint64_t, cfg->green.min_threshold); \ ++ MC_EXT_OP(ext, 5, 0, 8, uint8_t, cfg->yellow.drop_probability);\ ++ MC_EXT_OP(ext, 6, 0, 64, uint64_t, cfg->yellow.max_threshold); \ ++ MC_EXT_OP(ext, 7, 0, 64, uint64_t, cfg->yellow.min_threshold); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_EARLY_DROP(cmd, if_id, tc_id, early_drop_iova) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, tc_id); \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, if_id); \ ++ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, early_drop_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_ADD_CUSTOM_TPID(cmd, cfg) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->tpid) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_REMOVE_CUSTOM_TPID(cmd, cfg) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->tpid) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_ENABLE(cmd, if_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_DISABLE(cmd, if_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_GET_ATTR(cmd, if_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_IF_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 0, 4, enum dpsw_accepted_frames, \ ++ attr->admit_untagged);\ ++ MC_RSP_OP(cmd, 0, 5, 1, int, attr->enabled);\ ++ MC_RSP_OP(cmd, 0, 6, 1, int, attr->accept_all_vlan);\ ++ MC_RSP_OP(cmd, 0, 16, 8, uint8_t, attr->num_tcs);\ ++ MC_RSP_OP(cmd, 0, 32, 16, uint16_t, attr->qdid);\ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, attr->options);\ ++ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, attr->rate);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_MAX_FRAME_LENGTH(cmd, if_id, frame_length) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, frame_length);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_GET_MAX_FRAME_LENGTH(cmd, if_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_IF_GET_MAX_FRAME_LENGTH(cmd, frame_length) \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, frame_length) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_SET_LINK_CFG(cmd, if_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id);\ ++ MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->rate);\ ++ MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->options);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_IF_GET_LINK_STATE(cmd, if_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, if_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_IF_GET_LINK_STATE(cmd, state) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 32, 1, int, state->up);\ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, state->rate);\ ++ MC_RSP_OP(cmd, 2, 0, 64, uint64_t, state->options);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_ADD(cmd, vlan_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, cfg->fdb_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, vlan_id);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_ADD_IF(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_ADD_IF_UNTAGGED(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_ADD_IF_FLOODING(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, vlan_id) ++ ++#define DPSW_CMD_VLAN_REMOVE_IF(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_REMOVE_IF_UNTAGGED(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_REMOVE_IF_FLOODING(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_REMOVE(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_GET_ATTR(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_VLAN_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 1, 0, 16, uint16_t, attr->fdb_id); \ ++ MC_RSP_OP(cmd, 1, 16, 16, uint16_t, attr->num_ifs); \ ++ MC_RSP_OP(cmd, 1, 32, 16, uint16_t, attr->num_untagged_ifs); \ ++ MC_RSP_OP(cmd, 1, 48, 16, uint16_t, attr->num_flooding_ifs); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_GET_IF(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_VLAN_GET_IF(cmd, cfg) \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, cfg->num_ifs) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_GET_IF_FLOODING(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_VLAN_GET_IF_FLOODING(cmd, cfg) \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, cfg->num_ifs) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_VLAN_GET_IF_UNTAGGED(cmd, vlan_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, vlan_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_VLAN_GET_IF_UNTAGGED(cmd, cfg) \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, cfg->num_ifs) ++ ++/* param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_ADD(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 32, 16, uint16_t, cfg->fdb_aging_time);\ ++ MC_CMD_OP(cmd, 0, 48, 16, uint16_t, cfg->num_fdb_entries);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_FDB_ADD(cmd, fdb_id) \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, fdb_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_REMOVE(cmd, fdb_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, fdb_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_ADD_UNICAST(cmd, fdb_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, fdb_id);\ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->mac_addr[5]);\ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->mac_addr[4]);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->mac_addr[3]);\ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, cfg->mac_addr[2]);\ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, cfg->mac_addr[1]);\ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, cfg->mac_addr[0]);\ ++ MC_CMD_OP(cmd, 1, 0, 8, uint16_t, cfg->if_egress);\ ++ MC_CMD_OP(cmd, 1, 16, 4, enum dpsw_fdb_entry_type, cfg->type);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_GET_UNICAST(cmd, fdb_id) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, fdb_id);\ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->mac_addr[5]);\ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->mac_addr[4]);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->mac_addr[3]);\ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, cfg->mac_addr[2]);\ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, cfg->mac_addr[1]);\ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, cfg->mac_addr[0]);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_FDB_GET_UNICAST(cmd, cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 1, 0, 16, uint16_t, cfg->if_egress);\ ++ MC_RSP_OP(cmd, 1, 16, 4, enum dpsw_fdb_entry_type, cfg->type);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_REMOVE_UNICAST(cmd, fdb_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, fdb_id);\ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->mac_addr[5]);\ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->mac_addr[4]);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->mac_addr[3]);\ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, cfg->mac_addr[2]);\ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, cfg->mac_addr[1]);\ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, cfg->mac_addr[0]);\ ++ MC_CMD_OP(cmd, 1, 0, 16, uint16_t, cfg->if_egress);\ ++ MC_CMD_OP(cmd, 1, 16, 4, enum dpsw_fdb_entry_type, cfg->type);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_ADD_MULTICAST(cmd, fdb_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, fdb_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->num_ifs);\ ++ MC_CMD_OP(cmd, 0, 32, 4, enum dpsw_fdb_entry_type, cfg->type);\ ++ MC_CMD_OP(cmd, 1, 0, 8, uint8_t, cfg->mac_addr[5]);\ ++ MC_CMD_OP(cmd, 1, 8, 8, uint8_t, cfg->mac_addr[4]);\ ++ MC_CMD_OP(cmd, 1, 16, 8, uint8_t, cfg->mac_addr[3]);\ ++ MC_CMD_OP(cmd, 1, 24, 8, uint8_t, cfg->mac_addr[2]);\ ++ MC_CMD_OP(cmd, 1, 32, 8, uint8_t, cfg->mac_addr[1]);\ ++ MC_CMD_OP(cmd, 1, 40, 8, uint8_t, cfg->mac_addr[0]);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_GET_MULTICAST(cmd, fdb_id) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, fdb_id);\ ++ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->mac_addr[5]);\ ++ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->mac_addr[4]);\ ++ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->mac_addr[3]);\ ++ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, cfg->mac_addr[2]);\ ++ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, cfg->mac_addr[1]);\ ++ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, cfg->mac_addr[0]);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_FDB_GET_MULTICAST(cmd, cfg) \ ++do { \ ++ MC_RSP_OP(cmd, 1, 0, 16, uint16_t, cfg->num_ifs);\ ++ MC_RSP_OP(cmd, 1, 16, 4, enum dpsw_fdb_entry_type, cfg->type);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_REMOVE_MULTICAST(cmd, fdb_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, fdb_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->num_ifs);\ ++ MC_CMD_OP(cmd, 0, 32, 4, enum dpsw_fdb_entry_type, cfg->type);\ ++ MC_CMD_OP(cmd, 1, 0, 8, uint8_t, cfg->mac_addr[5]);\ ++ MC_CMD_OP(cmd, 1, 8, 8, uint8_t, cfg->mac_addr[4]);\ ++ MC_CMD_OP(cmd, 1, 16, 8, uint8_t, cfg->mac_addr[3]);\ ++ MC_CMD_OP(cmd, 1, 24, 8, uint8_t, cfg->mac_addr[2]);\ ++ MC_CMD_OP(cmd, 1, 32, 8, uint8_t, cfg->mac_addr[1]);\ ++ MC_CMD_OP(cmd, 1, 40, 8, uint8_t, cfg->mac_addr[0]);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_SET_LEARNING_MODE(cmd, fdb_id, mode) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, fdb_id);\ ++ MC_CMD_OP(cmd, 0, 16, 4, enum dpsw_fdb_learning_mode, mode);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_FDB_GET_ATTR(cmd, fdb_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, fdb_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_FDB_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, attr->max_fdb_entries);\ ++ MC_RSP_OP(cmd, 0, 32, 16, uint16_t, attr->fdb_aging_time);\ ++ MC_RSP_OP(cmd, 0, 48, 16, uint16_t, attr->num_fdb_mc_groups);\ ++ MC_RSP_OP(cmd, 1, 0, 16, uint16_t, attr->max_fdb_mc_groups);\ ++ MC_RSP_OP(cmd, 1, 16, 4, enum dpsw_fdb_learning_mode, \ ++ attr->learning_mode);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_ACL_ADD(cmd, cfg) \ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->max_entries) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_ACL_ADD(cmd, acl_id) \ ++ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, acl_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_ACL_REMOVE(cmd, acl_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, acl_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_PREP_ACL_ENTRY(ext, key) \ ++do { \ ++ MC_PREP_OP(ext, 0, 0, 8, uint8_t, key->match.l2_dest_mac[5]);\ ++ MC_PREP_OP(ext, 0, 8, 8, uint8_t, key->match.l2_dest_mac[4]);\ ++ MC_PREP_OP(ext, 0, 16, 8, uint8_t, key->match.l2_dest_mac[3]);\ ++ MC_PREP_OP(ext, 0, 24, 8, uint8_t, key->match.l2_dest_mac[2]);\ ++ MC_PREP_OP(ext, 0, 32, 8, uint8_t, key->match.l2_dest_mac[1]);\ ++ MC_PREP_OP(ext, 0, 40, 8, uint8_t, key->match.l2_dest_mac[0]);\ ++ MC_PREP_OP(ext, 0, 48, 16, uint16_t, key->match.l2_tpid);\ ++ MC_PREP_OP(ext, 1, 0, 8, uint8_t, key->match.l2_source_mac[5]);\ ++ MC_PREP_OP(ext, 1, 8, 8, uint8_t, key->match.l2_source_mac[4]);\ ++ MC_PREP_OP(ext, 1, 16, 8, uint8_t, key->match.l2_source_mac[3]);\ ++ MC_PREP_OP(ext, 1, 24, 8, uint8_t, key->match.l2_source_mac[2]);\ ++ MC_PREP_OP(ext, 1, 32, 8, uint8_t, key->match.l2_source_mac[1]);\ ++ MC_PREP_OP(ext, 1, 40, 8, uint8_t, key->match.l2_source_mac[0]);\ ++ MC_PREP_OP(ext, 1, 48, 16, uint16_t, key->match.l2_vlan_id);\ ++ MC_PREP_OP(ext, 2, 0, 32, uint32_t, key->match.l3_dest_ip);\ ++ MC_PREP_OP(ext, 2, 32, 32, uint32_t, key->match.l3_source_ip);\ ++ MC_PREP_OP(ext, 3, 0, 16, uint16_t, key->match.l4_dest_port);\ ++ MC_PREP_OP(ext, 3, 16, 16, uint16_t, key->match.l4_source_port);\ ++ MC_PREP_OP(ext, 3, 32, 16, uint16_t, key->match.l2_ether_type);\ ++ MC_PREP_OP(ext, 3, 48, 8, uint8_t, key->match.l2_pcp_dei);\ ++ MC_PREP_OP(ext, 3, 56, 8, uint8_t, key->match.l3_dscp);\ ++ MC_PREP_OP(ext, 4, 0, 8, uint8_t, key->mask.l2_dest_mac[5]);\ ++ MC_PREP_OP(ext, 4, 8, 8, uint8_t, key->mask.l2_dest_mac[4]);\ ++ MC_PREP_OP(ext, 4, 16, 8, uint8_t, key->mask.l2_dest_mac[3]);\ ++ MC_PREP_OP(ext, 4, 24, 8, uint8_t, key->mask.l2_dest_mac[2]);\ ++ MC_PREP_OP(ext, 4, 32, 8, uint8_t, key->mask.l2_dest_mac[1]);\ ++ MC_PREP_OP(ext, 4, 40, 8, uint8_t, key->mask.l2_dest_mac[0]);\ ++ MC_PREP_OP(ext, 4, 48, 16, uint16_t, key->mask.l2_tpid);\ ++ MC_PREP_OP(ext, 5, 0, 8, uint8_t, key->mask.l2_source_mac[5]);\ ++ MC_PREP_OP(ext, 5, 8, 8, uint8_t, key->mask.l2_source_mac[4]);\ ++ MC_PREP_OP(ext, 5, 16, 8, uint8_t, key->mask.l2_source_mac[3]);\ ++ MC_PREP_OP(ext, 5, 24, 8, uint8_t, key->mask.l2_source_mac[2]);\ ++ MC_PREP_OP(ext, 5, 32, 8, uint8_t, key->mask.l2_source_mac[1]);\ ++ MC_PREP_OP(ext, 5, 40, 8, uint8_t, key->mask.l2_source_mac[0]);\ ++ MC_PREP_OP(ext, 5, 48, 16, uint16_t, key->mask.l2_vlan_id);\ ++ MC_PREP_OP(ext, 6, 0, 32, uint32_t, key->mask.l3_dest_ip);\ ++ MC_PREP_OP(ext, 6, 32, 32, uint32_t, key->mask.l3_source_ip);\ ++ MC_PREP_OP(ext, 7, 0, 16, uint16_t, key->mask.l4_dest_port);\ ++ MC_PREP_OP(ext, 7, 16, 16, uint16_t, key->mask.l4_source_port);\ ++ MC_PREP_OP(ext, 7, 32, 16, uint16_t, key->mask.l2_ether_type);\ ++ MC_PREP_OP(ext, 7, 48, 8, uint8_t, key->mask.l2_pcp_dei);\ ++ MC_PREP_OP(ext, 7, 56, 8, uint8_t, key->mask.l3_dscp);\ ++ MC_PREP_OP(ext, 8, 0, 8, uint8_t, key->match.l3_protocol);\ ++ MC_PREP_OP(ext, 8, 8, 8, uint8_t, key->mask.l3_protocol);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_EXT_ACL_ENTRY(ext, key) \ ++do { \ ++ MC_EXT_OP(ext, 0, 0, 8, uint8_t, key->match.l2_dest_mac[5]);\ ++ MC_EXT_OP(ext, 0, 8, 8, uint8_t, key->match.l2_dest_mac[4]);\ ++ MC_EXT_OP(ext, 0, 16, 8, uint8_t, key->match.l2_dest_mac[3]);\ ++ MC_EXT_OP(ext, 0, 24, 8, uint8_t, key->match.l2_dest_mac[2]);\ ++ MC_EXT_OP(ext, 0, 32, 8, uint8_t, key->match.l2_dest_mac[1]);\ ++ MC_EXT_OP(ext, 0, 40, 8, uint8_t, key->match.l2_dest_mac[0]);\ ++ MC_EXT_OP(ext, 0, 48, 16, uint16_t, key->match.l2_tpid);\ ++ MC_EXT_OP(ext, 1, 0, 8, uint8_t, key->match.l2_source_mac[5]);\ ++ MC_EXT_OP(ext, 1, 8, 8, uint8_t, key->match.l2_source_mac[4]);\ ++ MC_EXT_OP(ext, 1, 16, 8, uint8_t, key->match.l2_source_mac[3]);\ ++ MC_EXT_OP(ext, 1, 24, 8, uint8_t, key->match.l2_source_mac[2]);\ ++ MC_EXT_OP(ext, 1, 32, 8, uint8_t, key->match.l2_source_mac[1]);\ ++ MC_EXT_OP(ext, 1, 40, 8, uint8_t, key->match.l2_source_mac[0]);\ ++ MC_EXT_OP(ext, 1, 48, 16, uint16_t, key->match.l2_vlan_id);\ ++ MC_EXT_OP(ext, 2, 0, 32, uint32_t, key->match.l3_dest_ip);\ ++ MC_EXT_OP(ext, 2, 32, 32, uint32_t, key->match.l3_source_ip);\ ++ MC_EXT_OP(ext, 3, 0, 16, uint16_t, key->match.l4_dest_port);\ ++ MC_EXT_OP(ext, 3, 16, 16, uint16_t, key->match.l4_source_port);\ ++ MC_EXT_OP(ext, 3, 32, 16, uint16_t, key->match.l2_ether_type);\ ++ MC_EXT_OP(ext, 3, 48, 8, uint8_t, key->match.l2_pcp_dei);\ ++ MC_EXT_OP(ext, 3, 56, 8, uint8_t, key->match.l3_dscp);\ ++ MC_EXT_OP(ext, 4, 0, 8, uint8_t, key->mask.l2_dest_mac[5]);\ ++ MC_EXT_OP(ext, 4, 8, 8, uint8_t, key->mask.l2_dest_mac[4]);\ ++ MC_EXT_OP(ext, 4, 16, 8, uint8_t, key->mask.l2_dest_mac[3]);\ ++ MC_EXT_OP(ext, 4, 24, 8, uint8_t, key->mask.l2_dest_mac[2]);\ ++ MC_EXT_OP(ext, 4, 32, 8, uint8_t, key->mask.l2_dest_mac[1]);\ ++ MC_EXT_OP(ext, 4, 40, 8, uint8_t, key->mask.l2_dest_mac[0]);\ ++ MC_EXT_OP(ext, 4, 48, 16, uint16_t, key->mask.l2_tpid);\ ++ MC_EXT_OP(ext, 5, 0, 8, uint8_t, key->mask.l2_source_mac[5]);\ ++ MC_EXT_OP(ext, 5, 8, 8, uint8_t, key->mask.l2_source_mac[4]);\ ++ MC_EXT_OP(ext, 5, 16, 8, uint8_t, key->mask.l2_source_mac[3]);\ ++ MC_EXT_OP(ext, 5, 24, 8, uint8_t, key->mask.l2_source_mac[2]);\ ++ MC_EXT_OP(ext, 5, 32, 8, uint8_t, key->mask.l2_source_mac[1]);\ ++ MC_EXT_OP(ext, 5, 40, 8, uint8_t, key->mask.l2_source_mac[0]);\ ++ MC_EXT_OP(ext, 5, 48, 16, uint16_t, key->mask.l2_vlan_id);\ ++ MC_EXT_OP(ext, 6, 0, 32, uint32_t, key->mask.l3_dest_ip);\ ++ MC_EXT_OP(ext, 6, 32, 32, uint32_t, key->mask.l3_source_ip);\ ++ MC_EXT_OP(ext, 7, 0, 16, uint16_t, key->mask.l4_dest_port);\ ++ MC_EXT_OP(ext, 7, 16, 16, uint16_t, key->mask.l4_source_port);\ ++ MC_EXT_OP(ext, 7, 32, 16, uint16_t, key->mask.l2_ether_type);\ ++ MC_EXT_OP(ext, 7, 48, 8, uint8_t, key->mask.l2_pcp_dei);\ ++ MC_EXT_OP(ext, 7, 56, 8, uint8_t, key->mask.l3_dscp);\ ++ MC_EXT_OP(ext, 8, 0, 8, uint8_t, key->match.l3_protocol);\ ++ MC_EXT_OP(ext, 8, 8, 8, uint8_t, key->mask.l3_protocol);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_ACL_ADD_ENTRY(cmd, acl_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, acl_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->result.if_id);\ ++ MC_CMD_OP(cmd, 0, 32, 32, int, cfg->precedence);\ ++ MC_CMD_OP(cmd, 1, 0, 4, enum dpsw_acl_action, cfg->result.action);\ ++ MC_CMD_OP(cmd, 6, 0, 64, uint64_t, cfg->key_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_ACL_REMOVE_ENTRY(cmd, acl_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, acl_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->result.if_id);\ ++ MC_CMD_OP(cmd, 0, 32, 32, int, cfg->precedence);\ ++ MC_CMD_OP(cmd, 1, 0, 4, enum dpsw_acl_action, cfg->result.action);\ ++ MC_CMD_OP(cmd, 6, 0, 64, uint64_t, cfg->key_iova); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_ACL_ADD_IF(cmd, acl_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, acl_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->num_ifs); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_ACL_REMOVE_IF(cmd, acl_id, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, acl_id);\ ++ MC_CMD_OP(cmd, 0, 16, 16, uint16_t, cfg->num_ifs); \ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_ACL_GET_ATTR(cmd, acl_id) \ ++ MC_CMD_OP(cmd, 0, 0, 16, uint16_t, acl_id) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_ACL_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 1, 0, 16, uint16_t, attr->max_entries);\ ++ MC_RSP_OP(cmd, 1, 16, 16, uint16_t, attr->num_entries);\ ++ MC_RSP_OP(cmd, 1, 32, 16, uint16_t, attr->num_ifs);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_RSP_CTRL_IF_GET_ATTR(cmd, attr) \ ++do { \ ++ MC_RSP_OP(cmd, 1, 0, 32, uint32_t, attr->rx_fqid);\ ++ MC_RSP_OP(cmd, 1, 32, 32, uint32_t, attr->rx_err_fqid);\ ++ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, attr->tx_err_conf_fqid);\ ++} while (0) ++ ++/* cmd, param, offset, width, type, arg_name */ ++#define DPSW_CMD_CTRL_IF_SET_POOLS(cmd, cfg) \ ++do { \ ++ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->num_dpbp); \ ++ MC_CMD_OP(cmd, 0, 8, 1, int, cfg->pools[0].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 9, 1, int, cfg->pools[1].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 10, 1, int, cfg->pools[2].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 11, 1, int, cfg->pools[3].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 12, 1, int, cfg->pools[4].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 13, 1, int, cfg->pools[5].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 14, 1, int, cfg->pools[6].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 15, 1, int, cfg->pools[7].backup_pool); \ ++ MC_CMD_OP(cmd, 0, 32, 32, int, cfg->pools[0].dpbp_id); \ ++ MC_CMD_OP(cmd, 4, 32, 16, uint16_t, cfg->pools[0].buffer_size);\ ++ MC_CMD_OP(cmd, 1, 0, 32, int, cfg->pools[1].dpbp_id); \ ++ MC_CMD_OP(cmd, 4, 48, 16, uint16_t, cfg->pools[1].buffer_size);\ ++ MC_CMD_OP(cmd, 1, 32, 32, int, cfg->pools[2].dpbp_id); \ ++ MC_CMD_OP(cmd, 5, 0, 16, uint16_t, cfg->pools[2].buffer_size);\ ++ MC_CMD_OP(cmd, 2, 0, 32, int, cfg->pools[3].dpbp_id); \ ++ MC_CMD_OP(cmd, 5, 16, 16, uint16_t, cfg->pools[3].buffer_size);\ ++ MC_CMD_OP(cmd, 2, 32, 32, int, cfg->pools[4].dpbp_id); \ ++ MC_CMD_OP(cmd, 5, 32, 16, uint16_t, cfg->pools[4].buffer_size);\ ++ MC_CMD_OP(cmd, 3, 0, 32, int, cfg->pools[5].dpbp_id); \ ++ MC_CMD_OP(cmd, 5, 48, 16, uint16_t, cfg->pools[5].buffer_size);\ ++ MC_CMD_OP(cmd, 3, 32, 32, int, cfg->pools[6].dpbp_id); \ ++ MC_CMD_OP(cmd, 6, 0, 16, uint16_t, cfg->pools[6].buffer_size);\ ++ MC_CMD_OP(cmd, 4, 0, 32, int, cfg->pools[7].dpbp_id); \ ++ MC_CMD_OP(cmd, 6, 16, 16, uint16_t, cfg->pools[7].buffer_size);\ ++} while (0) ++ ++#endif /* __FSL_DPSW_CMD_H */ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethsw/dpsw.c +@@ -0,0 +1,1639 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#include "../../fsl-mc/include/mc-sys.h" ++#include "../../fsl-mc/include/mc-cmd.h" ++#include "dpsw.h" ++#include "dpsw-cmd.h" ++ ++/* internal functions */ ++static void build_if_id_bitmap(const uint16_t *if_id, ++ const uint16_t num_ifs, ++ struct mc_command *cmd, ++ int start_param) ++{ ++ int i; ++ ++ for (i = 0; (i < num_ifs) && (i < DPSW_MAX_IF); i++) ++ cmd->params[start_param + (if_id[i] / 64)] |= mc_enc( ++ (if_id[i] % 64), 1, 1); ++} ++ ++static int read_if_id_bitmap(uint16_t *if_id, ++ uint16_t *num_ifs, ++ struct mc_command *cmd, ++ int start_param) ++{ ++ int bitmap[DPSW_MAX_IF] = { 0 }; ++ int i, j = 0; ++ int count = 0; ++ ++ for (i = 0; i < DPSW_MAX_IF; i++) { ++ bitmap[i] = (int)mc_dec(cmd->params[start_param + i / 64], ++ i % 64, 1); ++ count += bitmap[i]; ++ } ++ ++ *num_ifs = (uint16_t)count; ++ ++ for (i = 0; (i < DPSW_MAX_IF) && (j < count); i++) { ++ if (bitmap[i]) { ++ if_id[j] = (uint16_t)i; ++ j++; ++ } ++ } ++ ++ return 0; ++} ++ ++/* DPSW APIs */ ++int dpsw_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpsw_id, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_OPEN, ++ cmd_flags, ++ 0); ++ DPSW_CMD_OPEN(cmd, dpsw_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpsw_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_CLOSE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpsw_cfg *cfg, ++ uint16_t *token) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_CREATE, ++ cmd_flags, ++ 0); ++ DPSW_CMD_CREATE(cmd, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ *token = MC_CMD_HDR_READ_TOKEN(cmd.header); ++ ++ return 0; ++} ++ ++int dpsw_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_DESTROY, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_ENABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_DISABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IS_ENABLED, cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_IS_ENABLED(cmd, *en); ++ ++ return 0; ++} ++ ++int dpsw_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_RESET, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpsw_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_SET_IRQ, ++ cmd_flags, ++ token); ++ DPSW_CMD_SET_IRQ(cmd, irq_index, irq_cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpsw_irq_cfg *irq_cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_GET_IRQ, ++ cmd_flags, ++ token); ++ DPSW_CMD_GET_IRQ(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_GET_IRQ(cmd, *type, irq_cfg); ++ ++ return 0; ++} ++ ++int dpsw_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_SET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPSW_CMD_SET_IRQ_ENABLE(cmd, irq_index, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_GET_IRQ_ENABLE, ++ cmd_flags, ++ token); ++ DPSW_CMD_GET_IRQ_ENABLE(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_GET_IRQ_ENABLE(cmd, *en); ++ ++ return 0; ++} ++ ++int dpsw_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_SET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPSW_CMD_SET_IRQ_MASK(cmd, irq_index, mask); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_GET_IRQ_MASK, ++ cmd_flags, ++ token); ++ DPSW_CMD_GET_IRQ_MASK(cmd, irq_index); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_GET_IRQ_MASK(cmd, *mask); ++ ++ return 0; ++} ++ ++int dpsw_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_GET_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPSW_CMD_GET_IRQ_STATUS(cmd, irq_index, *status); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_GET_IRQ_STATUS(cmd, *status); ++ ++ return 0; ++} ++ ++int dpsw_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_CLEAR_IRQ_STATUS, ++ cmd_flags, ++ token); ++ DPSW_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpsw_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_GET_ATTR, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpsw_set_reflection_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_SET_REFLECTION_IF, ++ cmd_flags, ++ token); ++ DPSW_CMD_SET_REFLECTION_IF(cmd, if_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_set_link_cfg(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpsw_link_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_LINK_CFG, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_LINK_CFG(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_get_link_state(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpsw_link_state *state) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_GET_LINK_STATE, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_GET_LINK_STATE(cmd, if_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_IF_GET_LINK_STATE(cmd, state); ++ ++ return 0; ++} ++ ++int dpsw_if_set_flooding(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_FLOODING, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_FLOODING(cmd, if_id, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_set_broadcast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_BROADCAST, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_FLOODING(cmd, if_id, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_set_multicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ int en) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_MULTICAST, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_FLOODING(cmd, if_id, en); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_set_tci(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_tci_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_TCI, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_TCI(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_get_tci(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpsw_tci_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err = 0; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_GET_TCI, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_GET_TCI(cmd, if_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_IF_GET_TCI(cmd, cfg); ++ ++ return 0; ++} ++ ++int dpsw_if_set_stp(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_stp_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_STP, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_STP(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_set_accepted_frames(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_accepted_frames_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_ACCEPTED_FRAMES, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_ACCEPTED_FRAMES(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_set_accept_all_vlan(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ int accept_all) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_SET_IF_ACCEPT_ALL_VLAN, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_ACCEPT_ALL_VLAN(cmd, if_id, accept_all); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_get_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ enum dpsw_counter type, ++ uint64_t *counter) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_GET_COUNTER, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_GET_COUNTER(cmd, if_id, type); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_IF_GET_COUNTER(cmd, *counter); ++ ++ return 0; ++} ++ ++int dpsw_if_set_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ enum dpsw_counter type, ++ uint64_t counter) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_COUNTER, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_COUNTER(cmd, if_id, type, counter); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_set_tx_selection(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_tx_selection_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_TX_SELECTION, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_TX_SELECTION(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_add_reflection(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_reflection_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_ADD_REFLECTION, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_ADD_REFLECTION(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_remove_reflection(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_reflection_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_REMOVE_REFLECTION, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_REMOVE_REFLECTION(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_set_flooding_metering(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_metering_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_FLOODING_METERING, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_FLOODING_METERING(cmd, if_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_set_metering(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ uint8_t tc_id, ++ const struct dpsw_metering_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_METERING, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_METERING(cmd, if_id, tc_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++void dpsw_prepare_early_drop(const struct dpsw_early_drop_cfg *cfg, ++ uint8_t *early_drop_buf) ++{ ++ uint64_t *ext_params = (uint64_t *)early_drop_buf; ++ ++ DPSW_PREP_EARLY_DROP(ext_params, cfg); ++} ++ ++int dpsw_if_set_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ uint8_t tc_id, ++ uint64_t early_drop_iova) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_EARLY_DROP, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_EARLY_DROP(cmd, if_id, tc_id, early_drop_iova); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_add_custom_tpid(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpsw_custom_tpid_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_ADD_CUSTOM_TPID, ++ cmd_flags, ++ token); ++ DPSW_CMD_ADD_CUSTOM_TPID(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_remove_custom_tpid(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpsw_custom_tpid_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_REMOVE_CUSTOM_TPID, ++ cmd_flags, ++ token); ++ DPSW_CMD_REMOVE_CUSTOM_TPID(cmd, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_ENABLE, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_ENABLE(cmd, if_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_DISABLE, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_DISABLE(cmd, if_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpsw_if_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_GET_ATTR, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_GET_ATTR(cmd, if_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_IF_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpsw_if_set_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ uint16_t frame_length) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_SET_MAX_FRAME_LENGTH, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_SET_MAX_FRAME_LENGTH(cmd, if_id, frame_length); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_if_get_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ uint16_t *frame_length) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_IF_GET_MAX_FRAME_LENGTH, ++ cmd_flags, ++ token); ++ DPSW_CMD_IF_GET_MAX_FRAME_LENGTH(cmd, if_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ DPSW_RSP_IF_GET_MAX_FRAME_LENGTH(cmd, *frame_length); ++ ++ return 0; ++} ++ ++int dpsw_vlan_add(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_ADD, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_ADD(cmd, vlan_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_vlan_add_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 1); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_ADD_IF, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_ADD_IF(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_vlan_add_if_untagged(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 1); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_ADD_IF_UNTAGGED, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_ADD_IF_UNTAGGED(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_vlan_add_if_flooding(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 1); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_ADD_IF_FLOODING, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_ADD_IF_FLOODING(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_vlan_remove_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 1); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_REMOVE_IF, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_REMOVE_IF(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_vlan_remove_if_untagged(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 1); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_REMOVE_IF_UNTAGGED, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_REMOVE_IF_UNTAGGED(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_vlan_remove_if_flooding(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 1); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_REMOVE_IF_FLOODING, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_REMOVE_IF_FLOODING(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_vlan_remove(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_REMOVE, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_REMOVE(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_vlan_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ struct dpsw_vlan_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_GET_ATTRIBUTES, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_GET_ATTR(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_VLAN_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpsw_vlan_get_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ struct dpsw_vlan_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_GET_IF, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_GET_IF(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_VLAN_GET_IF(cmd, cfg); ++ read_if_id_bitmap(cfg->if_id, &cfg->num_ifs, &cmd, 1); ++ ++ return 0; ++} ++ ++int dpsw_vlan_get_if_flooding(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ struct dpsw_vlan_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_GET_IF_FLOODING, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_GET_IF_FLOODING(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_VLAN_GET_IF_FLOODING(cmd, cfg); ++ read_if_id_bitmap(cfg->if_id, &cfg->num_ifs, &cmd, 1); ++ ++ return 0; ++} ++ ++int dpsw_vlan_get_if_untagged(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ struct dpsw_vlan_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_VLAN_GET_IF_UNTAGGED, ++ cmd_flags, ++ token); ++ DPSW_CMD_VLAN_GET_IF_UNTAGGED(cmd, vlan_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_VLAN_GET_IF(cmd, cfg); ++ read_if_id_bitmap(cfg->if_id, &cfg->num_ifs, &cmd, 1); ++ ++ return 0; ++} ++ ++int dpsw_fdb_add(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *fdb_id, ++ const struct dpsw_fdb_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_ADD, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_ADD(cmd, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_FDB_ADD(cmd, *fdb_id); ++ ++ return 0; ++} ++ ++int dpsw_fdb_remove(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_REMOVE, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_REMOVE(cmd, fdb_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_fdb_add_unicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ const struct dpsw_fdb_unicast_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_ADD_UNICAST, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_ADD_UNICAST(cmd, fdb_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_fdb_get_unicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ struct dpsw_fdb_unicast_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_GET_UNICAST, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_GET_UNICAST(cmd, fdb_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_FDB_GET_UNICAST(cmd, cfg); ++ ++ return 0; ++} ++ ++int dpsw_fdb_remove_unicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ const struct dpsw_fdb_unicast_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_REMOVE_UNICAST, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_REMOVE_UNICAST(cmd, fdb_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_fdb_add_multicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ const struct dpsw_fdb_multicast_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 2); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_ADD_MULTICAST, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_ADD_MULTICAST(cmd, fdb_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_fdb_get_multicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ struct dpsw_fdb_multicast_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_GET_MULTICAST, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_GET_MULTICAST(cmd, fdb_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_FDB_GET_MULTICAST(cmd, cfg); ++ read_if_id_bitmap(cfg->if_id, &cfg->num_ifs, &cmd, 2); ++ ++ return 0; ++} ++ ++int dpsw_fdb_remove_multicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ const struct dpsw_fdb_multicast_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 2); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_REMOVE_MULTICAST, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_REMOVE_MULTICAST(cmd, fdb_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_fdb_set_learning_mode(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ enum dpsw_fdb_learning_mode mode) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_SET_LEARNING_MODE, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_SET_LEARNING_MODE(cmd, fdb_id, mode); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_fdb_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ struct dpsw_fdb_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_FDB_GET_ATTR, ++ cmd_flags, ++ token); ++ DPSW_CMD_FDB_GET_ATTR(cmd, fdb_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_FDB_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpsw_acl_add(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *acl_id, ++ const struct dpsw_acl_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_ACL_ADD, ++ cmd_flags, ++ token); ++ DPSW_CMD_ACL_ADD(cmd, cfg); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_ACL_ADD(cmd, *acl_id); ++ ++ return 0; ++} ++ ++int dpsw_acl_remove(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_ACL_REMOVE, ++ cmd_flags, ++ token); ++ DPSW_CMD_ACL_REMOVE(cmd, acl_id); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++void dpsw_acl_prepare_entry_cfg(const struct dpsw_acl_key *key, ++ uint8_t *entry_cfg_buf) ++{ ++ uint64_t *ext_params = (uint64_t *)entry_cfg_buf; ++ ++ DPSW_PREP_ACL_ENTRY(ext_params, key); ++} ++ ++int dpsw_acl_add_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ const struct dpsw_acl_entry_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_ACL_ADD_ENTRY, ++ cmd_flags, ++ token); ++ DPSW_CMD_ACL_ADD_ENTRY(cmd, acl_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_acl_remove_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ const struct dpsw_acl_entry_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_ACL_REMOVE_ENTRY, ++ cmd_flags, ++ token); ++ DPSW_CMD_ACL_REMOVE_ENTRY(cmd, acl_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_acl_add_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ const struct dpsw_acl_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 1); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_ACL_ADD_IF, ++ cmd_flags, ++ token); ++ DPSW_CMD_ACL_ADD_IF(cmd, acl_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_acl_remove_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ const struct dpsw_acl_if_cfg *cfg) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ build_if_id_bitmap(cfg->if_id, cfg->num_ifs, &cmd, 1); ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_ACL_REMOVE_IF, ++ cmd_flags, ++ token); ++ DPSW_CMD_ACL_REMOVE_IF(cmd, acl_id, cfg); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_acl_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ struct dpsw_acl_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_ACL_GET_ATTR, ++ cmd_flags, ++ token); ++ DPSW_CMD_ACL_GET_ATTR(cmd, acl_id); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_ACL_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpsw_ctrl_if_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpsw_ctrl_if_attr *attr) ++{ ++ struct mc_command cmd = { 0 }; ++ int err; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_CTRL_IF_GET_ATTR, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ err = mc_send_command(mc_io, &cmd); ++ if (err) ++ return err; ++ ++ /* retrieve response parameters */ ++ DPSW_RSP_CTRL_IF_GET_ATTR(cmd, attr); ++ ++ return 0; ++} ++ ++int dpsw_ctrl_if_set_pools(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpsw_ctrl_if_pools_cfg *pools) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_CTRL_IF_SET_POOLS, ++ cmd_flags, ++ token); ++ DPSW_CMD_CTRL_IF_SET_POOLS(cmd, pools); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++int dpsw_ctrl_if_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_CTRL_IF_ENABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} ++ ++/** ++* @brief Function disables control interface ++* @mc_io: Pointer to MC portal's I/O object ++* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++* @token: Token of DPSW object ++* ++* Return: '0' on Success; Error code otherwise. ++*/ ++int dpsw_ctrl_if_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token) ++{ ++ struct mc_command cmd = { 0 }; ++ ++ /* prepare command */ ++ cmd.header = mc_encode_cmd_header(DPSW_CMDID_CTRL_IF_DISABLE, ++ cmd_flags, ++ token); ++ ++ /* send command to mc*/ ++ return mc_send_command(mc_io, &cmd); ++} +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethsw/dpsw.h +@@ -0,0 +1,2164 @@ ++/* Copyright 2013-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of the above-listed copyright holders nor the ++ * names of any contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE ++ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS ++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN ++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ++ * POSSIBILITY OF SUCH DAMAGE. ++ */ ++#ifndef __FSL_DPSW_H ++#define __FSL_DPSW_H ++ ++#include "../../fsl-mc/include/net.h" ++ ++/* Data Path L2-Switch API ++ * Contains API for handling DPSW topology and functionality ++ */ ++ ++struct fsl_mc_io; ++ ++/** ++ * DPSW general definitions ++ */ ++ ++/** ++ * Maximum number of traffic class priorities ++ */ ++#define DPSW_MAX_PRIORITIES 8 ++/** ++ * Maximum number of interfaces ++ */ ++#define DPSW_MAX_IF 64 ++ ++/** ++ * dpsw_open() - Open a control session for the specified object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @dpsw_id: DPSW unique ID ++ * @token: Returned token; use in subsequent API calls ++ * ++ * This function can be used to open a control session for an ++ * already created object; an object may have been declared in ++ * the DPL or by calling the dpsw_create() function. ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent commands for ++ * this specific object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_open(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ int dpsw_id, ++ uint16_t *token); ++ ++/** ++ * dpsw_close() - Close the control session of the object ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * ++ * After this function is called, no further operations are ++ * allowed on the object without opening a new control session. ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_close(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * DPSW options ++ */ ++ ++/** ++ * Disable flooding ++ */ ++#define DPSW_OPT_FLOODING_DIS 0x0000000000000001ULL ++/** ++ * Disable Multicast ++ */ ++#define DPSW_OPT_MULTICAST_DIS 0x0000000000000004ULL ++/** ++ * Support control interface ++ */ ++#define DPSW_OPT_CTRL_IF_DIS 0x0000000000000010ULL ++/** ++ * Disable flooding metering ++ */ ++#define DPSW_OPT_FLOODING_METERING_DIS 0x0000000000000020ULL ++/** ++ * Enable metering ++ */ ++#define DPSW_OPT_METERING_EN 0x0000000000000040ULL ++ ++/** ++ * enum dpsw_component_type - component type of a bridge ++ * @DPSW_COMPONENT_TYPE_C_VLAN: A C-VLAN component of an ++ * enterprise VLAN bridge or of a Provider Bridge used ++ * to process C-tagged frames ++ * @DPSW_COMPONENT_TYPE_S_VLAN: An S-VLAN component of a ++ * Provider Bridge ++ * ++ */ ++enum dpsw_component_type { ++ DPSW_COMPONENT_TYPE_C_VLAN = 0, ++ DPSW_COMPONENT_TYPE_S_VLAN ++}; ++ ++/** ++ * struct dpsw_cfg - DPSW configuration ++ * @num_ifs: Number of external and internal interfaces ++ * @adv: Advanced parameters; default is all zeros; ++ * use this structure to change default settings ++ */ ++struct dpsw_cfg { ++ uint16_t num_ifs; ++ /** ++ * struct adv - Advanced parameters ++ * @options: Enable/Disable DPSW features (bitmap) ++ * @max_vlans: Maximum Number of VLAN's; 0 - indicates default 16 ++ * @max_meters_per_if: Number of meters per interface ++ * @max_fdbs: Maximum Number of FDB's; 0 - indicates default 16 ++ * @max_fdb_entries: Number of FDB entries for default FDB table; ++ * 0 - indicates default 1024 entries. ++ * @fdb_aging_time: Default FDB aging time for default FDB table; ++ * 0 - indicates default 300 seconds ++ * @max_fdb_mc_groups: Number of multicast groups in each FDB table; ++ * 0 - indicates default 32 ++ * @component_type: Indicates the component type of this bridge ++ */ ++ struct { ++ uint64_t options; ++ uint16_t max_vlans; ++ uint8_t max_meters_per_if; ++ uint8_t max_fdbs; ++ uint16_t max_fdb_entries; ++ uint16_t fdb_aging_time; ++ uint16_t max_fdb_mc_groups; ++ enum dpsw_component_type component_type; ++ } adv; ++}; ++ ++/** ++ * dpsw_create() - Create the DPSW object. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @cfg: Configuration structure ++ * @token: Returned token; use in subsequent API calls ++ * ++ * Create the DPSW object, allocate required resources and ++ * perform required initialization. ++ * ++ * The object can be created either by declaring it in the ++ * DPL file, or by calling this function. ++ * ++ * This function returns a unique authentication token, ++ * associated with the specific object ID and the specific MC ++ * portal; this token must be used in all subsequent calls to ++ * this specific object. For objects that are created using the ++ * DPL file, call dpsw_open() function to get an authentication ++ * token first ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_create(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ const struct dpsw_cfg *cfg, ++ uint16_t *token); ++ ++/** ++ * dpsw_destroy() - Destroy the DPSW object and release all its resources. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpsw_destroy(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpsw_enable() - Enable DPSW functionality ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpsw_disable() - Disable DPSW functionality ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * dpsw_is_enabled() - Check if the DPSW is enabled ++ * ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @en: Returns '1' if object is enabled; '0' otherwise ++ * ++ * Return: '0' on Success; Error code otherwise ++ */ ++int dpsw_is_enabled(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ int *en); ++ ++/** ++ * dpsw_reset() - Reset the DPSW, returns the object to initial state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_reset(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++ * DPSW IRQ Index and Events ++ */ ++ ++#define DPSW_IRQ_INDEX_IF 0x0000 ++#define DPSW_IRQ_INDEX_L2SW 0x0001 ++ ++/** ++ * IRQ event - Indicates that the link state changed ++ */ ++#define DPSW_IRQ_EVENT_LINK_CHANGED 0x0001 ++ ++/** ++ * struct dpsw_irq_cfg - IRQ configuration ++ * @addr: Address that must be written to signal a message-based interrupt ++ * @val: Value to write into irq_addr address ++ * @irq_num: A user defined number associated with this IRQ ++ */ ++struct dpsw_irq_cfg { ++ uint64_t addr; ++ uint32_t val; ++ int irq_num; ++}; ++ ++/** ++ * dpsw_set_irq() - Set IRQ information for the DPSW to trigger an interrupt. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @irq_index: Identifies the interrupt index to configure ++ * @irq_cfg: IRQ configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_set_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ struct dpsw_irq_cfg *irq_cfg); ++ ++/** ++ * dpsw_get_irq() - Get IRQ information from the DPSW ++ * ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @irq_index: The interrupt index to configure ++ * @type: Interrupt type: 0 represents message interrupt ++ * type (both irq_addr and irq_val are valid) ++ * @irq_cfg: IRQ attributes ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_get_irq(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ int *type, ++ struct dpsw_irq_cfg *irq_cfg); ++ ++/** ++ * dpsw_set_irq_enable() - Set overall interrupt state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCI object ++ * @irq_index: The interrupt index to configure ++ * @en: Interrupt state - enable = 1, disable = 0 ++ * ++ * Allows GPP software to control when interrupts are generated. ++ * Each interrupt can have up to 32 causes. The enable/disable control's the ++ * overall interrupt state. if the interrupt is disabled no causes will cause ++ * an interrupt ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_set_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t en); ++ ++/** ++ * dpsw_get_irq_enable() - Get overall interrupt state ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @irq_index: The interrupt index to configure ++ * @en: Returned Interrupt state - enable = 1, disable = 0 ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_get_irq_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint8_t *en); ++ ++/** ++ * dpsw_set_irq_mask() - Set interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCI object ++ * @irq_index: The interrupt index to configure ++ * @mask: event mask to trigger interrupt; ++ * each bit: ++ * 0 = ignore event ++ * 1 = consider event for asserting IRQ ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_set_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t mask); ++ ++/** ++ * dpsw_get_irq_mask() - Get interrupt mask. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @irq_index: The interrupt index to configure ++ * @mask: Returned event mask to trigger interrupt ++ * ++ * Every interrupt can have up to 32 causes and the interrupt model supports ++ * masking/unmasking each cause independently ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_get_irq_mask(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *mask); ++ ++/** ++ * dpsw_get_irq_status() - Get the current status of any pending interrupts ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @irq_index: The interrupt index to configure ++ * @status: Returned interrupts status - one bit per cause: ++ * 0 = no interrupt pending ++ * 1 = interrupt pending ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_get_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t *status); ++ ++/** ++ * dpsw_clear_irq_status() - Clear a pending interrupt's status ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPCI object ++ * @irq_index: The interrupt index to configure ++ * @status: bits to clear (W1C) - one bit per cause: ++ * 0 = don't change ++ * 1 = clear status bit ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_clear_irq_status(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint8_t irq_index, ++ uint32_t status); ++/** ++ * struct dpsw_attr - Structure representing DPSW attributes ++ * @id: DPSW object ID ++ * @version: DPSW version ++ * @options: Enable/Disable DPSW features ++ * @max_vlans: Maximum Number of VLANs ++ * @max_meters_per_if: Number of meters per interface ++ * @max_fdbs: Maximum Number of FDBs ++ * @max_fdb_entries: Number of FDB entries for default FDB table; ++ * 0 - indicates default 1024 entries. ++ * @fdb_aging_time: Default FDB aging time for default FDB table; ++ * 0 - indicates default 300 seconds ++ * @max_fdb_mc_groups: Number of multicast groups in each FDB table; ++ * 0 - indicates default 32 ++ * @mem_size: DPSW frame storage memory size ++ * @num_ifs: Number of interfaces ++ * @num_vlans: Current number of VLANs ++ * @num_fdbs: Current number of FDBs ++ * @component_type: Component type of this bridge ++ */ ++struct dpsw_attr { ++ int id; ++ /** ++ * struct version - DPSW version ++ * @major: DPSW major version ++ * @minor: DPSW minor version ++ */ ++ struct { ++ uint16_t major; ++ uint16_t minor; ++ } version; ++ uint64_t options; ++ uint16_t max_vlans; ++ uint8_t max_meters_per_if; ++ uint8_t max_fdbs; ++ uint16_t max_fdb_entries; ++ uint16_t fdb_aging_time; ++ uint16_t max_fdb_mc_groups; ++ uint16_t num_ifs; ++ uint16_t mem_size; ++ uint16_t num_vlans; ++ uint8_t num_fdbs; ++ enum dpsw_component_type component_type; ++}; ++ ++/** ++ * dpsw_get_attributes() - Retrieve DPSW attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @attr: Returned DPSW attributes ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpsw_attr *attr); ++ ++/** ++ * dpsw_set_reflection_if() - Set target interface for reflected interfaces. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Id ++ * ++ * Only one reflection receive interface is allowed per switch ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_set_reflection_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id); ++ ++/** ++ * enum dpsw_action - Action selection for special/control frames ++ * @DPSW_ACTION_DROP: Drop frame ++ * @DPSW_ACTION_REDIRECT: Redirect frame to control port ++ */ ++enum dpsw_action { ++ DPSW_ACTION_DROP = 0, ++ DPSW_ACTION_REDIRECT = 1 ++}; ++ ++/** ++ * Enable auto-negotiation ++ */ ++#define DPSW_LINK_OPT_AUTONEG 0x0000000000000001ULL ++/** ++ * Enable half-duplex mode ++ */ ++#define DPSW_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL ++/** ++ * Enable pause frames ++ */ ++#define DPSW_LINK_OPT_PAUSE 0x0000000000000004ULL ++/** ++ * Enable a-symmetric pause frames ++ */ ++#define DPSW_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL ++ ++/** ++ * struct dpsw_link_cfg - Structure representing DPSW link configuration ++ * @rate: Rate ++ * @options: Mask of available options; use 'DPSW_LINK_OPT_' values ++ */ ++struct dpsw_link_cfg { ++ uint32_t rate; ++ uint64_t options; ++}; ++ ++/** ++ * dpsw_if_set_link_cfg() - set the link configuration. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: interface id ++ * @cfg: Link configuration ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_link_cfg(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpsw_link_cfg *cfg); ++/** ++ * struct dpsw_link_state - Structure representing DPSW link state ++ * @rate: Rate ++ * @options: Mask of available options; use 'DPSW_LINK_OPT_' values ++ * @up: 0 - covers two cases: down and disconnected, 1 - up ++ */ ++struct dpsw_link_state { ++ uint32_t rate; ++ uint64_t options; ++ int up; ++}; ++ ++/** ++ * dpsw_if_get_link_state - Return the link state ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: interface id ++ * @state: link state 1 - linkup, 0 - link down or disconnected ++ * ++ * @returns '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_get_link_state(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpsw_link_state *state); ++ ++/** ++ * dpsw_if_set_flooding() - Enable Disable flooding for particular interface ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @en: 1 - enable, 0 - disable ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_flooding(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ int en); ++ ++/** ++ * dpsw_if_set_broadcast() - Enable/disable broadcast for particular interface ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @en: 1 - enable, 0 - disable ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_broadcast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ int en); ++ ++/** ++ * dpsw_if_set_multicast() - Enable/disable multicast for particular interface ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @en: 1 - enable, 0 - disable ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_multicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ int en); ++ ++/** ++ * struct dpsw_tci_cfg - Tag Contorl Information (TCI) configuration ++ * @pcp: Priority Code Point (PCP): a 3-bit field which refers ++ * to the IEEE 802.1p priority ++ * @dei: Drop Eligible Indicator (DEI): a 1-bit field. May be used ++ * separately or in conjunction with PCP to indicate frames ++ * eligible to be dropped in the presence of congestion ++ * @vlan_id: VLAN Identifier (VID): a 12-bit field specifying the VLAN ++ * to which the frame belongs. The hexadecimal values ++ * of 0x000 and 0xFFF are reserved; ++ * all other values may be used as VLAN identifiers, ++ * allowing up to 4,094 VLANs ++ */ ++struct dpsw_tci_cfg { ++ uint8_t pcp; ++ uint8_t dei; ++ uint16_t vlan_id; ++}; ++ ++/** ++ * dpsw_if_set_tci() - Set default VLAN Tag Control Information (TCI) ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @cfg: Tag Control Information Configuration ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_tci(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_tci_cfg *cfg); ++ ++/** ++ * dpsw_if_get_tci() - Get default VLAN Tag Control Information (TCI) ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @cfg: Tag Control Information Configuration ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_get_tci(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpsw_tci_cfg *cfg); ++ ++/** ++ * enum dpsw_stp_state - Spanning Tree Protocol (STP) states ++ * @DPSW_STP_STATE_BLOCKING: Blocking state ++ * @DPSW_STP_STATE_LISTENING: Listening state ++ * @DPSW_STP_STATE_LEARNING: Learning state ++ * @DPSW_STP_STATE_FORWARDING: Forwarding state ++ * ++ */ ++enum dpsw_stp_state { ++ DPSW_STP_STATE_BLOCKING = 0, ++ DPSW_STP_STATE_LISTENING = 1, ++ DPSW_STP_STATE_LEARNING = 2, ++ DPSW_STP_STATE_FORWARDING = 3 ++}; ++ ++/** ++ * struct dpsw_stp_cfg - Spanning Tree Protocol (STP) Configuration ++ * @vlan_id: VLAN ID STP state ++ * @state: STP state ++ */ ++struct dpsw_stp_cfg { ++ uint16_t vlan_id; ++ enum dpsw_stp_state state; ++}; ++ ++/** ++ * dpsw_if_set_stp() - Function sets Spanning Tree Protocol (STP) state. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @cfg: STP State configuration parameters ++ * ++ * The following STP states are supported - ++ * blocking, listening, learning, forwarding and disabled. ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_stp(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_stp_cfg *cfg); ++ ++/** ++ * enum dpsw_accepted_frames - Types of frames to accept ++ * @DPSW_ADMIT_ALL: The device accepts VLAN tagged, untagged and ++ * priority tagged frames ++ * @DPSW_ADMIT_ONLY_VLAN_TAGGED: The device discards untagged frames or ++ * Priority-Tagged frames received on this interface. ++ * ++ */ ++enum dpsw_accepted_frames { ++ DPSW_ADMIT_ALL = 1, ++ DPSW_ADMIT_ONLY_VLAN_TAGGED = 3 ++}; ++ ++/** ++ * struct dpsw_accepted_frames_cfg - Types of frames to accept configuration ++ * @type: Defines ingress accepted frames ++ * @unaccept_act: When a frame is not accepted, it may be discarded or ++ * redirected to control interface depending on this mode ++ */ ++struct dpsw_accepted_frames_cfg { ++ enum dpsw_accepted_frames type; ++ enum dpsw_action unaccept_act; ++}; ++ ++/** ++ * dpsw_if_set_accepted_frames() ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @cfg: Frame types configuration ++ * ++ * When is admit_only_vlan_tagged- the device will discard untagged ++ * frames or Priority-Tagged frames received on this interface. ++ * When admit_only_untagged- untagged frames or Priority-Tagged ++ * frames received on this interface will be accepted and assigned ++ * to a VID based on the PVID and VID Set for this interface. ++ * When admit_all - the device will accept VLAN tagged, untagged ++ * and priority tagged frames. ++ * The default is admit_all ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_accepted_frames(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_accepted_frames_cfg *cfg); ++ ++/** ++ * dpsw_if_set_accept_all_vlan() ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @accept_all: Accept or drop frames having different VLAN ++ * ++ * When this is accept (FALSE), the device will discard incoming ++ * frames for VLANs that do not include this interface in its ++ * Member set. When accept (TRUE), the interface will accept all incoming frames ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_accept_all_vlan(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ int accept_all); ++ ++/** ++ * enum dpsw_counter - Counters types ++ * @DPSW_CNT_ING_FRAME: Counts ingress frames ++ * @DPSW_CNT_ING_BYTE: Counts ingress bytes ++ * @DPSW_CNT_ING_FLTR_FRAME: Counts filtered ingress frames ++ * @DPSW_CNT_ING_FRAME_DISCARD: Counts discarded ingress frame ++ * @DPSW_CNT_ING_MCAST_FRAME: Counts ingress multicast frames ++ * @DPSW_CNT_ING_MCAST_BYTE: Counts ingress multicast bytes ++ * @DPSW_CNT_ING_BCAST_FRAME: Counts ingress broadcast frames ++ * @DPSW_CNT_ING_BCAST_BYTES: Counts ingress broadcast bytes ++ * @DPSW_CNT_EGR_FRAME: Counts egress frames ++ * @DPSW_CNT_EGR_BYTE: Counts eEgress bytes ++ * @DPSW_CNT_EGR_FRAME_DISCARD: Counts discarded egress frames ++ * @DPSW_CNT_EGR_STP_FRAME_DISCARD: Counts egress STP discarded frames ++ */ ++enum dpsw_counter { ++ DPSW_CNT_ING_FRAME = 0x0, ++ DPSW_CNT_ING_BYTE = 0x1, ++ DPSW_CNT_ING_FLTR_FRAME = 0x2, ++ DPSW_CNT_ING_FRAME_DISCARD = 0x3, ++ DPSW_CNT_ING_MCAST_FRAME = 0x4, ++ DPSW_CNT_ING_MCAST_BYTE = 0x5, ++ DPSW_CNT_ING_BCAST_FRAME = 0x6, ++ DPSW_CNT_ING_BCAST_BYTES = 0x7, ++ DPSW_CNT_EGR_FRAME = 0x8, ++ DPSW_CNT_EGR_BYTE = 0x9, ++ DPSW_CNT_EGR_FRAME_DISCARD = 0xa, ++ DPSW_CNT_EGR_STP_FRAME_DISCARD = 0xb ++}; ++ ++/** ++ * dpsw_if_get_counter() - Get specific counter of particular interface ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @type: Counter type ++ * @counter: return value ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_get_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ enum dpsw_counter type, ++ uint64_t *counter); ++ ++/** ++ * dpsw_if_set_counter() - Set specific counter of particular interface ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @type: Counter type ++ * @counter: New counter value ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_counter(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ enum dpsw_counter type, ++ uint64_t counter); ++ ++/** ++ * Maximum number of TC ++ */ ++#define DPSW_MAX_TC 8 ++ ++/** ++ * enum dpsw_priority_selector - User priority ++ * @DPSW_UP_PCP: Priority Code Point (PCP): a 3-bit field which ++ * refers to the IEEE 802.1p priority. ++ * @DPSW_UP_DSCP: Differentiated services Code Point (DSCP): 6 bit ++ * field from IP header ++ * ++ */ ++enum dpsw_priority_selector { ++ DPSW_UP_PCP = 0, ++ DPSW_UP_DSCP = 1 ++}; ++ ++/** ++ * enum dpsw_schedule_mode - Traffic classes scheduling ++ * @DPSW_SCHED_STRICT_PRIORITY: schedule strict priority ++ * @DPSW_SCHED_WEIGHTED: schedule based on token bucket created algorithm ++ */ ++enum dpsw_schedule_mode { ++ DPSW_SCHED_STRICT_PRIORITY, ++ DPSW_SCHED_WEIGHTED ++}; ++ ++/** ++ * struct dpsw_tx_schedule_cfg - traffic class configuration ++ * @mode: Strict or weight-based scheduling ++ * @delta_bandwidth: weighted Bandwidth in range from 100 to 10000 ++ */ ++struct dpsw_tx_schedule_cfg { ++ enum dpsw_schedule_mode mode; ++ uint16_t delta_bandwidth; ++}; ++ ++/** ++ * struct dpsw_tx_selection_cfg - Mapping user priority into traffic ++ * class configuration ++ * @priority_selector: Source for user priority regeneration ++ * @tc_id: The Regenerated User priority that the incoming ++ * User Priority is mapped to for this interface ++ * @tc_sched: Traffic classes configuration ++ */ ++struct dpsw_tx_selection_cfg { ++ enum dpsw_priority_selector priority_selector; ++ uint8_t tc_id[DPSW_MAX_PRIORITIES]; ++ struct dpsw_tx_schedule_cfg tc_sched[DPSW_MAX_TC]; ++}; ++ ++/** ++ * dpsw_if_set_tx_selection() - Function is used for mapping variety ++ * of frame fields ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @cfg: Traffic class mapping configuration ++ * ++ * Function is used for mapping variety of frame fields (DSCP, PCP) ++ * to Traffic Class. Traffic class is a number ++ * in the range from 0 to 7 ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_tx_selection(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_tx_selection_cfg *cfg); ++ ++/** ++ * enum dpsw_reflection_filter - Filter type for frames to reflect ++ * @DPSW_REFLECTION_FILTER_INGRESS_ALL: Reflect all frames ++ * @DPSW_REFLECTION_FILTER_INGRESS_VLAN: Reflect only frames belong to ++ * particular VLAN defined by vid parameter ++ * ++ */ ++enum dpsw_reflection_filter { ++ DPSW_REFLECTION_FILTER_INGRESS_ALL = 0, ++ DPSW_REFLECTION_FILTER_INGRESS_VLAN = 1 ++}; ++ ++/** ++ * struct dpsw_reflection_cfg - Structure representing reflection information ++ * @filter: Filter type for frames to reflect ++ * @vlan_id: Vlan Id to reflect; valid only when filter type is ++ * DPSW_INGRESS_VLAN ++ */ ++struct dpsw_reflection_cfg { ++ enum dpsw_reflection_filter filter; ++ uint16_t vlan_id; ++}; ++ ++/** ++ * dpsw_if_add_reflection() - Identify interface to be reflected or mirrored ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @cfg: Reflection configuration ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_add_reflection(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_reflection_cfg *cfg); ++ ++/** ++ * dpsw_if_remove_reflection() - Remove interface to be reflected or mirrored ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @cfg: Reflection configuration ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_remove_reflection(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_reflection_cfg *cfg); ++ ++/** ++ * enum dpsw_metering_mode - Metering modes ++ * @DPSW_METERING_MODE_NONE: metering disabled ++ * @DPSW_METERING_MODE_RFC2698: RFC 2698 ++ * @DPSW_METERING_MODE_RFC4115: RFC 4115 ++ */ ++enum dpsw_metering_mode { ++ DPSW_METERING_MODE_NONE = 0, ++ DPSW_METERING_MODE_RFC2698, ++ DPSW_METERING_MODE_RFC4115 ++}; ++ ++/** ++ * enum dpsw_metering_unit - Metering count ++ * @DPSW_METERING_UNIT_BYTES: count bytes ++ * @DPSW_METERING_UNIT_FRAMES: count frames ++ */ ++enum dpsw_metering_unit { ++ DPSW_METERING_UNIT_BYTES = 0, ++ DPSW_METERING_UNIT_FRAMES ++}; ++ ++/** ++ * struct dpsw_metering_cfg - Metering configuration ++ * @mode: metering modes ++ * @units: Bytes or frame units ++ * @cir: Committed information rate (CIR) in Kbits/s ++ * @eir: Peak information rate (PIR) Kbit/s rfc2698 ++ * Excess information rate (EIR) Kbit/s rfc4115 ++ * @cbs: Committed burst size (CBS) in bytes ++ * @ebs: Peak burst size (PBS) in bytes for rfc2698 ++ * Excess bust size (EBS) in bytes rfc4115 ++ * ++ */ ++struct dpsw_metering_cfg { ++ enum dpsw_metering_mode mode; ++ enum dpsw_metering_unit units; ++ uint32_t cir; ++ uint32_t eir; ++ uint32_t cbs; ++ uint32_t ebs; ++}; ++ ++/** ++ * dpsw_if_set_flooding_metering() - Set flooding metering ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @cfg: Metering parameters ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_flooding_metering(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ const struct dpsw_metering_cfg *cfg); ++ ++/** ++ * dpsw_if_set_metering() - Set interface metering for flooding ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @tc_id: Traffic class ID ++ * @cfg: Metering parameters ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_metering(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ uint8_t tc_id, ++ const struct dpsw_metering_cfg *cfg); ++ ++/** ++ * enum dpsw_early_drop_unit - DPSW early drop unit ++ * @DPSW_EARLY_DROP_UNIT_BYTE: count bytes ++ * @DPSW_EARLY_DROP_UNIT_FRAMES: count frames ++ */ ++enum dpsw_early_drop_unit { ++ DPSW_EARLY_DROP_UNIT_BYTE = 0, ++ DPSW_EARLY_DROP_UNIT_FRAMES ++}; ++ ++/** ++ * enum dpsw_early_drop_mode - DPSW early drop mode ++ * @DPSW_EARLY_DROP_MODE_NONE: early drop is disabled ++ * @DPSW_EARLY_DROP_MODE_TAIL: early drop in taildrop mode ++ * @DPSW_EARLY_DROP_MODE_WRED: early drop in WRED mode ++ */ ++enum dpsw_early_drop_mode { ++ DPSW_EARLY_DROP_MODE_NONE = 0, ++ DPSW_EARLY_DROP_MODE_TAIL, ++ DPSW_EARLY_DROP_MODE_WRED ++}; ++ ++/** ++ * struct dpsw_wred_cfg - WRED configuration ++ * @max_threshold: maximum threshold that packets may be discarded. Above this ++ * threshold all packets are discarded; must be less than 2^39; ++ * approximated to be expressed as (x+256)*2^(y-1) due to HW ++ * implementation. ++ * @min_threshold: minimum threshold that packets may be discarded at ++ * @drop_probability: probability that a packet will be discarded (1-100, ++ * associated with the maximum threshold) ++ */ ++struct dpsw_wred_cfg { ++ uint64_t min_threshold; ++ uint64_t max_threshold; ++ uint8_t drop_probability; ++}; ++ ++/** ++ * struct dpsw_early_drop_cfg - early-drop configuration ++ * @drop_mode: drop mode ++ * @units: count units ++ * @yellow: WRED - 'yellow' configuration ++ * @green: WRED - 'green' configuration ++ * @tail_drop_threshold: tail drop threshold ++ */ ++struct dpsw_early_drop_cfg { ++ enum dpsw_early_drop_mode drop_mode; ++ enum dpsw_early_drop_unit units; ++ struct dpsw_wred_cfg yellow; ++ struct dpsw_wred_cfg green; ++ uint32_t tail_drop_threshold; ++}; ++ ++/** ++ * dpsw_prepare_early_drop() - Prepare an early drop for setting in to interface ++ * @cfg: Early-drop configuration ++ * @early_drop_buf: Zeroed 256 bytes of memory before mapping it to DMA ++ * ++ * This function has to be called before dpsw_if_tc_set_early_drop ++ * ++ */ ++void dpsw_prepare_early_drop(const struct dpsw_early_drop_cfg *cfg, ++ uint8_t *early_drop_buf); ++ ++/** ++ * dpsw_if_set_early_drop() - Set interface traffic class early-drop ++ * configuration ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @tc_id: Traffic class selection (0-7) ++ * @early_drop_iova: I/O virtual address of 64 bytes; ++ * Must be cacheline-aligned and DMA-able memory ++ * ++ * warning: Before calling this function, call dpsw_prepare_if_tc_early_drop() ++ * to prepare the early_drop_iova parameter ++ * ++ * Return: '0' on Success; error code otherwise. ++ */ ++int dpsw_if_set_early_drop(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ uint8_t tc_id, ++ uint64_t early_drop_iova); ++ ++/** ++ * struct dpsw_custom_tpid_cfg - Structure representing tag Protocol identifier ++ * @tpid: An additional tag protocol identifier ++ */ ++struct dpsw_custom_tpid_cfg { ++ uint16_t tpid; ++}; ++ ++/** ++ * dpsw_add_custom_tpid() - API Configures a distinct Ethernet type value ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @cfg: Tag Protocol identifier ++ * ++ * API Configures a distinct Ethernet type value (or TPID value) ++ * to indicate a VLAN tag in addition to the common ++ * TPID values 0x8100 and 0x88A8. ++ * Two additional TPID's are supported ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_add_custom_tpid(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpsw_custom_tpid_cfg *cfg); ++ ++/** ++ * dpsw_remove_custom_tpid - API removes a distinct Ethernet type value ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @cfg: Tag Protocol identifier ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_remove_custom_tpid(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpsw_custom_tpid_cfg *cfg); ++ ++/** ++ * dpsw_if_enable() - Enable Interface ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id); ++ ++/** ++ * dpsw_if_disable() - Disable Interface ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id); ++ ++/** ++ * struct dpsw_if_attr - Structure representing DPSW interface attributes ++ * @num_tcs: Number of traffic classes ++ * @rate: Transmit rate in bits per second ++ * @options: Interface configuration options (bitmap) ++ * @enabled: Indicates if interface is enabled ++ * @accept_all_vlan: The device discards/accepts incoming frames ++ * for VLANs that do not include this interface ++ * @admit_untagged: When set to 'DPSW_ADMIT_ONLY_VLAN_TAGGED', the device ++ * discards untagged frames or priority-tagged frames received on ++ * this interface; ++ * When set to 'DPSW_ADMIT_ALL', untagged frames or priority- ++ * tagged frames received on this interface are accepted ++ * @qdid: control frames transmit qdid ++ */ ++struct dpsw_if_attr { ++ uint8_t num_tcs; ++ uint32_t rate; ++ uint32_t options; ++ int enabled; ++ int accept_all_vlan; ++ enum dpsw_accepted_frames admit_untagged; ++ uint16_t qdid; ++}; ++ ++/** ++ * dpsw_if_get_attributes() - Function obtains attributes of interface ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @attr: Returned interface attributes ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ struct dpsw_if_attr *attr); ++ ++/** ++ * dpsw_if_set_max_frame_length() - Set Maximum Receive frame length. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @frame_length: Maximum Frame Length ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_set_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ uint16_t frame_length); ++ ++/** ++ * dpsw_if_get_max_frame_length() - Get Maximum Receive frame length. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @if_id: Interface Identifier ++ * @frame_length: Returned maximum Frame Length ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_if_get_max_frame_length(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t if_id, ++ uint16_t *frame_length); ++ ++/** ++ * struct dpsw_vlan_cfg - VLAN Configuration ++ * @fdb_id: Forwarding Data Base ++ */ ++struct dpsw_vlan_cfg { ++ uint16_t fdb_id; ++}; ++ ++/** ++ * dpsw_vlan_add() - Adding new VLAN to DPSW. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: VLAN configuration ++ * ++ * Only VLAN ID and FDB ID are required parameters here. ++ * 12 bit VLAN ID is defined in IEEE802.1Q. ++ * Adding a duplicate VLAN ID is not allowed. ++ * FDB ID can be shared across multiple VLANs. Shared learning ++ * is obtained by calling dpsw_vlan_add for multiple VLAN IDs ++ * with same fdb_id ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_add(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_cfg *cfg); ++ ++/** ++ * struct dpsw_vlan_if_cfg - Set of VLAN Interfaces ++ * @num_ifs: The number of interfaces that are assigned to the egress ++ * list for this VLAN ++ * @if_id: The set of interfaces that are ++ * assigned to the egress list for this VLAN ++ */ ++struct dpsw_vlan_if_cfg { ++ uint16_t num_ifs; ++ uint16_t if_id[DPSW_MAX_IF]; ++}; ++ ++/** ++ * dpsw_vlan_add_if() - Adding a set of interfaces to an existing VLAN. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: Set of interfaces to add ++ * ++ * It adds only interfaces not belonging to this VLAN yet, ++ * otherwise an error is generated and an entire command is ++ * ignored. This function can be called numerous times always ++ * providing required interfaces delta. ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_add_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg); ++ ++/** ++ * dpsw_vlan_add_if_untagged() - Defining a set of interfaces that should be ++ * transmitted as untagged. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: set of interfaces that should be transmitted as untagged ++ * ++ * These interfaces should already belong to this VLAN. ++ * By default all interfaces are transmitted as tagged. ++ * Providing un-existing interface or untagged interface that is ++ * configured untagged already generates an error and the entire ++ * command is ignored. ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_add_if_untagged(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg); ++ ++/** ++ * dpsw_vlan_add_if_flooding() - Define a set of interfaces that should be ++ * included in flooding when frame with unknown destination ++ * unicast MAC arrived. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: Set of interfaces that should be used for flooding ++ * ++ * These interfaces should belong to this VLAN. By default all ++ * interfaces are included into flooding list. Providing ++ * un-existing interface or an interface that already in the ++ * flooding list generates an error and the entire command is ++ * ignored. ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_add_if_flooding(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg); ++ ++/** ++ * dpsw_vlan_remove_if() - Remove interfaces from an existing VLAN. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: Set of interfaces that should be removed ++ * ++ * Interfaces must belong to this VLAN, otherwise an error ++ * is returned and an the command is ignored ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_remove_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg); ++ ++/** ++ * dpsw_vlan_remove_if_untagged() - Define a set of interfaces that should be ++ * converted from transmitted as untagged to transmit as tagged. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: set of interfaces that should be removed ++ * ++ * Interfaces provided by API have to belong to this VLAN and ++ * configured untagged, otherwise an error is returned and the ++ * command is ignored ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_remove_if_untagged(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg); ++ ++/** ++ * dpsw_vlan_remove_if_flooding() - Define a set of interfaces that should be ++ * removed from the flooding list. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: set of interfaces used for flooding ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_remove_if_flooding(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ const struct dpsw_vlan_if_cfg *cfg); ++ ++/** ++ * dpsw_vlan_remove() - Remove an entire VLAN ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_remove(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id); ++ ++/** ++ * struct dpsw_vlan_attr - VLAN attributes ++ * @fdb_id: Associated FDB ID ++ * @num_ifs: Number of interfaces ++ * @num_untagged_ifs: Number of untagged interfaces ++ * @num_flooding_ifs: Number of flooding interfaces ++ */ ++struct dpsw_vlan_attr { ++ uint16_t fdb_id; ++ uint16_t num_ifs; ++ uint16_t num_untagged_ifs; ++ uint16_t num_flooding_ifs; ++}; ++ ++/** ++ * dpsw_vlan_get_attributes() - Get VLAN attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @attr: Returned DPSW attributes ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ struct dpsw_vlan_attr *attr); ++ ++/** ++ * dpsw_vlan_get_if() - Get interfaces belong to this VLAN ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: Returned set of interfaces belong to this VLAN ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_get_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ struct dpsw_vlan_if_cfg *cfg); ++ ++/** ++ * dpsw_vlan_get_if_flooding() - Get interfaces used in flooding for this VLAN ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: Returned set of flooding interfaces ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_get_if_flooding(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ struct dpsw_vlan_if_cfg *cfg); ++ ++/** ++ * dpsw_vlan_get_if_untagged() - Get interfaces that should be transmitted as ++ * untagged ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @vlan_id: VLAN Identifier ++ * @cfg: Returned set of untagged interfaces ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_vlan_get_if_untagged(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t vlan_id, ++ struct dpsw_vlan_if_cfg *cfg); ++ ++/** ++ * struct dpsw_fdb_cfg - FDB Configuration ++ * @num_fdb_entries: Number of FDB entries ++ * @fdb_aging_time: Aging time in seconds ++ */ ++struct dpsw_fdb_cfg { ++ uint16_t num_fdb_entries; ++ uint16_t fdb_aging_time; ++}; ++ ++/** ++ * dpsw_fdb_add() - Add FDB to switch and Returns handle to FDB table for ++ * the reference ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Returned Forwarding Database Identifier ++ * @cfg: FDB Configuration ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_add(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *fdb_id, ++ const struct dpsw_fdb_cfg *cfg); ++ ++/** ++ * dpsw_fdb_remove() - Remove FDB from switch ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Forwarding Database Identifier ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_remove(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id); ++ ++/** ++ * enum dpsw_fdb_entry_type - FDB Entry type - Static/Dynamic ++ * @DPSW_FDB_ENTRY_STATIC: Static entry ++ * @DPSW_FDB_ENTRY_DINAMIC: Dynamic entry ++ */ ++enum dpsw_fdb_entry_type { ++ DPSW_FDB_ENTRY_STATIC = 0, ++ DPSW_FDB_ENTRY_DINAMIC = 1 ++}; ++ ++/** ++ * struct dpsw_fdb_unicast_cfg - Unicast entry configuration ++ * @type: Select static or dynamic entry ++ * @mac_addr: MAC address ++ * @if_egress: Egress interface ID ++ */ ++struct dpsw_fdb_unicast_cfg { ++ enum dpsw_fdb_entry_type type; ++ uint8_t mac_addr[6]; ++ uint16_t if_egress; ++}; ++ ++/** ++ * dpsw_fdb_add_unicast() - Function adds an unicast entry into MAC lookup table ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Forwarding Database Identifier ++ * @cfg: Unicast entry configuration ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_add_unicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ const struct dpsw_fdb_unicast_cfg *cfg); ++ ++/** ++ * dpsw_fdb_get_unicast() - Get unicast entry from MAC lookup table by ++ * unicast Ethernet address ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Forwarding Database Identifier ++ * @cfg: Returned unicast entry configuration ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_get_unicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ struct dpsw_fdb_unicast_cfg *cfg); ++ ++/** ++ * dpsw_fdb_remove_unicast() - removes an entry from MAC lookup table ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Forwarding Database Identifier ++ * @cfg: Unicast entry configuration ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_remove_unicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ const struct dpsw_fdb_unicast_cfg *cfg); ++ ++/** ++ * struct dpsw_fdb_multicast_cfg - Multi-cast entry configuration ++ * @type: Select static or dynamic entry ++ * @mac_addr: MAC address ++ * @num_ifs: Number of external and internal interfaces ++ * @if_id: Egress interface IDs ++ */ ++struct dpsw_fdb_multicast_cfg { ++ enum dpsw_fdb_entry_type type; ++ uint8_t mac_addr[6]; ++ uint16_t num_ifs; ++ uint16_t if_id[DPSW_MAX_IF]; ++}; ++ ++/** ++ * dpsw_fdb_add_multicast() - Add a set of egress interfaces to multi-cast group ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Forwarding Database Identifier ++ * @cfg: Multicast entry configuration ++ * ++ * If group doesn't exist, it will be created. ++ * It adds only interfaces not belonging to this multicast group ++ * yet, otherwise error will be generated and the command is ++ * ignored. ++ * This function may be called numerous times always providing ++ * required interfaces delta. ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_add_multicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ const struct dpsw_fdb_multicast_cfg *cfg); ++ ++/** ++ * dpsw_fdb_get_multicast() - Reading multi-cast group by multi-cast Ethernet ++ * address. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Forwarding Database Identifier ++ * @cfg: Returned multicast entry configuration ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_get_multicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ struct dpsw_fdb_multicast_cfg *cfg); ++ ++/** ++ * dpsw_fdb_remove_multicast() - Removing interfaces from an existing multicast ++ * group. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Forwarding Database Identifier ++ * @cfg: Multicast entry configuration ++ * ++ * Interfaces provided by this API have to exist in the group, ++ * otherwise an error will be returned and an entire command ++ * ignored. If there is no interface left in the group, ++ * an entire group is deleted ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_remove_multicast(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ const struct dpsw_fdb_multicast_cfg *cfg); ++ ++/** ++ * enum dpsw_fdb_learning_mode - Auto-learning modes ++ * @DPSW_FDB_LEARNING_MODE_DIS: Disable Auto-learning ++ * @DPSW_FDB_LEARNING_MODE_HW: Enable HW auto-Learning ++ * @DPSW_FDB_LEARNING_MODE_NON_SECURE: Enable None secure learning by CPU ++ * @DPSW_FDB_LEARNING_MODE_SECURE: Enable secure learning by CPU ++ * ++ * NONE - SECURE LEARNING ++ * SMAC found DMAC found CTLU Action ++ * v v Forward frame to ++ * 1. DMAC destination ++ * - v Forward frame to ++ * 1. DMAC destination ++ * 2. Control interface ++ * v - Forward frame to ++ * 1. Flooding list of interfaces ++ * - - Forward frame to ++ * 1. Flooding list of interfaces ++ * 2. Control interface ++ * SECURE LEARING ++ * SMAC found DMAC found CTLU Action ++ * v v Forward frame to ++ * 1. DMAC destination ++ * - v Forward frame to ++ * 1. Control interface ++ * v - Forward frame to ++ * 1. Flooding list of interfaces ++ * - - Forward frame to ++ * 1. Control interface ++ */ ++enum dpsw_fdb_learning_mode { ++ DPSW_FDB_LEARNING_MODE_DIS = 0, ++ DPSW_FDB_LEARNING_MODE_HW = 1, ++ DPSW_FDB_LEARNING_MODE_NON_SECURE = 2, ++ DPSW_FDB_LEARNING_MODE_SECURE = 3 ++}; ++ ++/** ++ * dpsw_fdb_set_learning_mode() - Define FDB learning mode ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Forwarding Database Identifier ++ * @mode: learning mode ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_set_learning_mode(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ enum dpsw_fdb_learning_mode mode); ++ ++/** ++ * struct dpsw_fdb_attr - FDB Attributes ++ * @max_fdb_entries: Number of FDB entries ++ * @fdb_aging_time: Aging time in seconds ++ * @learning_mode: Learning mode ++ * @num_fdb_mc_groups: Current number of multicast groups ++ * @max_fdb_mc_groups: Maximum number of multicast groups ++ */ ++struct dpsw_fdb_attr { ++ uint16_t max_fdb_entries; ++ uint16_t fdb_aging_time; ++ enum dpsw_fdb_learning_mode learning_mode; ++ uint16_t num_fdb_mc_groups; ++ uint16_t max_fdb_mc_groups; ++}; ++ ++/** ++ * dpsw_fdb_get_attributes() - Get FDB attributes ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @fdb_id: Forwarding Database Identifier ++ * @attr: Returned FDB attributes ++ * ++ * Return: Completion status. '0' on Success; Error code otherwise. ++ */ ++int dpsw_fdb_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t fdb_id, ++ struct dpsw_fdb_attr *attr); ++ ++/** ++ * struct dpsw_acl_cfg - ACL Configuration ++ * @max_entries: Number of FDB entries ++ */ ++struct dpsw_acl_cfg { ++ uint16_t max_entries; ++}; ++ ++/** ++ * struct dpsw_acl_fields - ACL fields. ++ * @l2_dest_mac: Destination MAC address: BPDU, Multicast, Broadcast, Unicast, ++ * slow protocols, MVRP, STP ++ * @l2_source_mac: Source MAC address ++ * @l2_tpid: Layer 2 (Ethernet) protocol type, used to identify the following ++ * protocols: MPLS, PTP, PFC, ARP, Jumbo frames, LLDP, IEEE802.1ae, ++ * Q-in-Q, IPv4, IPv6, PPPoE ++ * @l2_pcp_dei: indicate which protocol is encapsulated in the payload ++ * @l2_vlan_id: layer 2 VLAN ID ++ * @l2_ether_type: layer 2 Ethernet type ++ * @l3_dscp: Layer 3 differentiated services code point ++ * @l3_protocol: Tells the Network layer at the destination host, to which ++ * Protocol this packet belongs to. The following protocol are ++ * supported: ICMP, IGMP, IPv4 (encapsulation), TCP, IPv6 ++ * (encapsulation), GRE, PTP ++ * @l3_source_ip: Source IPv4 IP ++ * @l3_dest_ip: Destination IPv4 IP ++ * @l4_source_port: Source TCP/UDP Port ++ * @l4_dest_port: Destination TCP/UDP Port ++ */ ++struct dpsw_acl_fields { ++ uint8_t l2_dest_mac[6]; ++ uint8_t l2_source_mac[6]; ++ uint16_t l2_tpid; ++ uint8_t l2_pcp_dei; ++ uint16_t l2_vlan_id; ++ uint16_t l2_ether_type; ++ uint8_t l3_dscp; ++ uint8_t l3_protocol; ++ uint32_t l3_source_ip; ++ uint32_t l3_dest_ip; ++ uint16_t l4_source_port; ++ uint16_t l4_dest_port; ++}; ++ ++/** ++ * struct dpsw_acl_key - ACL key ++ * @match: Match fields ++ * @mask: Mask: b'1 - valid, b'0 don't care ++ */ ++struct dpsw_acl_key { ++ struct dpsw_acl_fields match; ++ struct dpsw_acl_fields mask; ++}; ++ ++/** ++ * enum dpsw_acl_action ++ * @DPSW_ACL_ACTION_DROP: Drop frame ++ * @DPSW_ACL_ACTION_REDIRECT: Redirect to certain port ++ * @DPSW_ACL_ACTION_ACCEPT: Accept frame ++ * @DPSW_ACL_ACTION_REDIRECT_TO_CTRL_IF: Redirect to control interface ++ */ ++enum dpsw_acl_action { ++ DPSW_ACL_ACTION_DROP, ++ DPSW_ACL_ACTION_REDIRECT, ++ DPSW_ACL_ACTION_ACCEPT, ++ DPSW_ACL_ACTION_REDIRECT_TO_CTRL_IF ++}; ++ ++/** ++ * struct dpsw_acl_result - ACL action ++ * @action: Action should be taken when ACL entry hit ++ * @if_id: Interface IDs to redirect frame. Valid only if redirect selected for ++ * action ++ */ ++struct dpsw_acl_result { ++ enum dpsw_acl_action action; ++ uint16_t if_id; ++}; ++ ++/** ++ * struct dpsw_acl_entry_cfg - ACL entry ++ * @key_iova: I/O virtual address of DMA-able memory filled with key after call ++ * to dpsw_acl_prepare_entry_cfg() ++ * @result: Required action when entry hit occurs ++ * @precedence: Precedence inside ACL 0 is lowest; This priority can not change ++ * during the lifetime of a Policy. It is user responsibility to ++ * space the priorities according to consequent rule additions. ++ */ ++struct dpsw_acl_entry_cfg { ++ uint64_t key_iova; ++ struct dpsw_acl_result result; ++ int precedence; ++}; ++ ++/** ++ * dpsw_acl_add() - Adds ACL to L2 switch. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @acl_id: Returned ACL ID, for the future reference ++ * @cfg: ACL configuration ++ * ++ * Create Access Control List. Multiple ACLs can be created and ++ * co-exist in L2 switch ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_acl_add(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t *acl_id, ++ const struct dpsw_acl_cfg *cfg); ++ ++/** ++ * dpsw_acl_remove() - Removes ACL from L2 switch. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @acl_id: ACL ID ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_acl_remove(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id); ++ ++/** ++ * dpsw_acl_prepare_entry_cfg() - Set an entry to ACL. ++ * @key: key ++ * @entry_cfg_buf: Zeroed 256 bytes of memory before mapping it to DMA ++ * ++ * This function has to be called before adding or removing acl_entry ++ * ++ */ ++void dpsw_acl_prepare_entry_cfg(const struct dpsw_acl_key *key, ++ uint8_t *entry_cfg_buf); ++ ++/** ++ * dpsw_acl_add_entry() - Adds an entry to ACL. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @acl_id: ACL ID ++ * @cfg: entry configuration ++ * ++ * warning: This function has to be called after dpsw_acl_set_entry_cfg() ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_acl_add_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ const struct dpsw_acl_entry_cfg *cfg); ++ ++/** ++ * dpsw_acl_remove_entry() - Removes an entry from ACL. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @acl_id: ACL ID ++ * @cfg: entry configuration ++ * ++ * warning: This function has to be called after dpsw_acl_set_entry_cfg() ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_acl_remove_entry(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ const struct dpsw_acl_entry_cfg *cfg); ++ ++/** ++ * struct dpsw_acl_if_cfg - List of interfaces to Associate with ACL ++ * @num_ifs: Number of interfaces ++ * @if_id: List of interfaces ++ */ ++struct dpsw_acl_if_cfg { ++ uint16_t num_ifs; ++ uint16_t if_id[DPSW_MAX_IF]; ++}; ++ ++/** ++ * dpsw_acl_add_if() - Associate interface/interfaces with ACL. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @acl_id: ACL ID ++ * @cfg: interfaces list ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_acl_add_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ const struct dpsw_acl_if_cfg *cfg); ++ ++/** ++ * dpsw_acl_remove_if() - De-associate interface/interfaces from ACL. ++ * @mc_io: Pointer to MC portal's I/O object ++ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++ * @token: Token of DPSW object ++ * @acl_id: ACL ID ++ * @cfg: interfaces list ++ * ++ * Return: '0' on Success; Error code otherwise. ++ */ ++int dpsw_acl_remove_if(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ const struct dpsw_acl_if_cfg *cfg); ++ ++/** ++ * struct dpsw_acl_attr - ACL Attributes ++ * @max_entries: Max number of ACL entries ++ * @num_entries: Number of used ACL entries ++ * @num_ifs: Number of interfaces associated with ACL ++ */ ++struct dpsw_acl_attr { ++ uint16_t max_entries; ++ uint16_t num_entries; ++ uint16_t num_ifs; ++}; ++ ++/** ++* dpsw_acl_get_attributes() - Get specific counter of particular interface ++* @mc_io: Pointer to MC portal's I/O object ++* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++* @token: Token of DPSW object ++* @acl_id: ACL Identifier ++* @attr: Returned ACL attributes ++* ++* Return: '0' on Success; Error code otherwise. ++*/ ++int dpsw_acl_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ uint16_t acl_id, ++ struct dpsw_acl_attr *attr); ++/** ++* struct dpsw_ctrl_if_attr - Control interface attributes ++* @rx_fqid: Receive FQID ++* @rx_err_fqid: Receive error FQID ++* @tx_err_conf_fqid: Transmit error and confirmation FQID ++*/ ++struct dpsw_ctrl_if_attr { ++ uint32_t rx_fqid; ++ uint32_t rx_err_fqid; ++ uint32_t tx_err_conf_fqid; ++}; ++ ++/** ++* dpsw_ctrl_if_get_attributes() - Obtain control interface attributes ++* @mc_io: Pointer to MC portal's I/O object ++* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++* @token: Token of DPSW object ++* @attr: Returned control interface attributes ++* ++* Return: '0' on Success; Error code otherwise. ++*/ ++int dpsw_ctrl_if_get_attributes(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ struct dpsw_ctrl_if_attr *attr); ++ ++/** ++ * Maximum number of DPBP ++ */ ++#define DPSW_MAX_DPBP 8 ++ ++/** ++ * struct dpsw_ctrl_if_pools_cfg - Control interface buffer pools configuration ++ * @num_dpbp: Number of DPBPs ++ * @pools: Array of buffer pools parameters; The number of valid entries ++ * must match 'num_dpbp' value ++ */ ++struct dpsw_ctrl_if_pools_cfg { ++ uint8_t num_dpbp; ++ /** ++ * struct pools - Buffer pools parameters ++ * @dpbp_id: DPBP object ID ++ * @buffer_size: Buffer size ++ * @backup_pool: Backup pool ++ */ ++ struct { ++ int dpbp_id; ++ uint16_t buffer_size; ++ int backup_pool; ++ } pools[DPSW_MAX_DPBP]; ++}; ++ ++/** ++* dpsw_ctrl_if_set_pools() - Set control interface buffer pools ++* @mc_io: Pointer to MC portal's I/O object ++* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++* @token: Token of DPSW object ++* @cfg: buffer pools configuration ++* ++* Return: '0' on Success; Error code otherwise. ++*/ ++int dpsw_ctrl_if_set_pools(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token, ++ const struct dpsw_ctrl_if_pools_cfg *cfg); ++ ++/** ++* dpsw_ctrl_if_enable() - Enable control interface ++* @mc_io: Pointer to MC portal's I/O object ++* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++* @token: Token of DPSW object ++* ++* Return: '0' on Success; Error code otherwise. ++*/ ++int dpsw_ctrl_if_enable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++/** ++* dpsw_ctrl_if_disable() - Function disables control interface ++* @mc_io: Pointer to MC portal's I/O object ++* @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' ++* @token: Token of DPSW object ++* ++* Return: '0' on Success; Error code otherwise. ++*/ ++int dpsw_ctrl_if_disable(struct fsl_mc_io *mc_io, ++ uint32_t cmd_flags, ++ uint16_t token); ++ ++#endif /* __FSL_DPSW_H */ +--- /dev/null ++++ b/drivers/staging/fsl-dpaa2/ethsw/switch.c +@@ -0,0 +1,1711 @@ ++/* Copyright 2014-2015 Freescale Semiconductor Inc. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "../../fsl-mc/include/mc.h" ++#include "dpsw.h" ++#include "dpsw-cmd.h" ++ ++/* Minimal supported DPSE version */ ++#define DPSW_MIN_VER_MAJOR 7 ++#define DPSW_MIN_VER_MINOR 0 ++ ++/* IRQ index */ ++#define DPSW_MAX_IRQ_NUM 2 ++ ++#define ETHSW_VLAN_MEMBER 1 ++#define ETHSW_VLAN_UNTAGGED 2 ++#define ETHSW_VLAN_PVID 4 ++#define ETHSW_VLAN_GLOBAL 8 ++ ++struct ethsw_port_priv { ++ struct net_device *netdev; ++ struct list_head list; ++ u16 port_index; ++ struct ethsw_dev_priv *ethsw_priv; ++ u8 stp_state; ++ ++ char vlans[VLAN_VID_MASK+1]; ++ ++}; ++ ++struct ethsw_dev_priv { ++ struct net_device *netdev; ++ struct fsl_mc_io *mc_io; ++ uint16_t dpsw_handle; ++ struct dpsw_attr sw_attr; ++ int dev_id; ++ /*TODO: redundant, we can use the slave dev list */ ++ struct list_head port_list; ++ ++ bool flood; ++ bool learning; ++ ++ char vlans[VLAN_VID_MASK+1]; ++}; ++ ++static int ethsw_port_stop(struct net_device *netdev); ++static int ethsw_port_open(struct net_device *netdev); ++ ++static inline void __get_priv(struct net_device *netdev, ++ struct ethsw_dev_priv **priv, ++ struct ethsw_port_priv **port_priv) ++{ ++ struct ethsw_dev_priv *_priv = NULL; ++ struct ethsw_port_priv *_port_priv = NULL; ++ ++ if (netdev->flags & IFF_MASTER) { ++ _priv = netdev_priv(netdev); ++ } else { ++ _port_priv = netdev_priv(netdev); ++ _priv = _port_priv->ethsw_priv; ++ } ++ ++ if (priv) ++ *priv = _priv; ++ if (port_priv) ++ *port_priv = _port_priv; ++} ++ ++/* -------------------------------------------------------------------------- */ ++/* ethsw netdevice ops */ ++ ++static netdev_tx_t ethsw_dropframe(struct sk_buff *skb, struct net_device *dev) ++{ ++ /* we don't support I/O for now, drop the frame */ ++ dev_kfree_skb_any(skb); ++ return NETDEV_TX_OK; ++} ++ ++static int ethsw_open(struct net_device *netdev) ++{ ++ struct ethsw_dev_priv *priv = netdev_priv(netdev); ++ struct list_head *pos; ++ struct ethsw_port_priv *port_priv = NULL; ++ int err; ++ ++ err = dpsw_enable(priv->mc_io, 0, priv->dpsw_handle); ++ if (err) { ++ netdev_err(netdev, "dpsw_enable err %d\n", err); ++ return err; ++ } ++ ++ list_for_each(pos, &priv->port_list) { ++ port_priv = list_entry(pos, struct ethsw_port_priv, list); ++ err = dev_open(port_priv->netdev); ++ if (err) ++ netdev_err(port_priv->netdev, "dev_open err %d\n", err); ++ } ++ ++ return 0; ++} ++ ++static int ethsw_stop(struct net_device *netdev) ++{ ++ struct ethsw_dev_priv *priv = netdev_priv(netdev); ++ struct list_head *pos; ++ struct ethsw_port_priv *port_priv = NULL; ++ int err; ++ ++ err = dpsw_disable(priv->mc_io, 0, priv->dpsw_handle); ++ if (err) { ++ netdev_err(netdev, "dpsw_disable err %d\n", err); ++ return err; ++ } ++ ++ list_for_each(pos, &priv->port_list) { ++ port_priv = list_entry(pos, struct ethsw_port_priv, list); ++ err = dev_close(port_priv->netdev); ++ if (err) ++ netdev_err(port_priv->netdev, ++ "dev_close err %d\n", err); ++ } ++ ++ return 0; ++} ++ ++static int ethsw_add_vlan(struct net_device *netdev, u16 vid) ++{ ++ struct ethsw_dev_priv *priv = netdev_priv(netdev); ++ int err; ++ ++ struct dpsw_vlan_cfg vcfg = { ++ /* TODO: add support for VLAN private FDBs */ ++ .fdb_id = 0, ++ }; ++ if (priv->vlans[vid]) { ++ netdev_err(netdev, "VLAN already configured\n"); ++ return -EEXIST; ++ } ++ ++ err = dpsw_vlan_add(priv->mc_io, 0, priv->dpsw_handle, vid, &vcfg); ++ if (err) { ++ netdev_err(netdev, "dpsw_vlan_add err %d\n", err); ++ return err; ++ } ++ priv->vlans[vid] = ETHSW_VLAN_MEMBER; ++ ++ return 0; ++} ++ ++static int ethsw_port_add_vlan(struct net_device *netdev, u16 vid, u16 flags) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ struct ethsw_dev_priv *priv = port_priv->ethsw_priv; ++ int err; ++ ++ struct dpsw_vlan_if_cfg vcfg = { ++ .num_ifs = 1, ++ .if_id[0] = port_priv->port_index, ++ }; ++ ++ if (port_priv->vlans[vid]) { ++ netdev_err(netdev, "VLAN already configured\n"); ++ return -EEXIST; ++ } ++ ++ if (flags & BRIDGE_VLAN_INFO_PVID && netif_oper_up(netdev)) { ++ netdev_err(netdev, "interface must be down to change PVID!\n"); ++ return -EBUSY; ++ } ++ ++ err = dpsw_vlan_add_if(priv->mc_io, 0, priv->dpsw_handle, vid, &vcfg); ++ if (err) { ++ netdev_err(netdev, "dpsw_vlan_add_if err %d\n", err); ++ return err; ++ } ++ port_priv->vlans[vid] = ETHSW_VLAN_MEMBER; ++ ++ if (flags & BRIDGE_VLAN_INFO_UNTAGGED) { ++ err = dpsw_vlan_add_if_untagged(priv->mc_io, 0, ++ priv->dpsw_handle, vid, &vcfg); ++ if (err) { ++ netdev_err(netdev, "dpsw_vlan_add_if_untagged err %d\n", ++ err); ++ return err; ++ } ++ port_priv->vlans[vid] |= ETHSW_VLAN_UNTAGGED; ++ } ++ ++ if (flags & BRIDGE_VLAN_INFO_PVID) { ++ struct dpsw_tci_cfg tci_cfg = { ++ /* TODO: at least add better defaults if these cannot ++ * be configured ++ */ ++ .pcp = 0, ++ .dei = 0, ++ .vlan_id = vid, ++ }; ++ ++ err = dpsw_if_set_tci(priv->mc_io, 0, priv->dpsw_handle, ++ port_priv->port_index, &tci_cfg); ++ if (err) { ++ netdev_err(netdev, "dpsw_if_set_tci err %d\n", err); ++ return err; ++ } ++ port_priv->vlans[vid] |= ETHSW_VLAN_PVID; ++ } ++ ++ return 0; ++} ++ ++static const struct nla_policy ifla_br_policy[IFLA_MAX+1] = { ++ [IFLA_BRIDGE_FLAGS] = { .type = NLA_U16 }, ++ [IFLA_BRIDGE_MODE] = { .type = NLA_U16 }, ++ [IFLA_BRIDGE_VLAN_INFO] = { .type = NLA_BINARY, ++ .len = sizeof(struct bridge_vlan_info), }, ++}; ++ ++static int ethsw_setlink_af_spec(struct net_device *netdev, ++ struct nlattr **tb) ++{ ++ struct bridge_vlan_info *vinfo; ++ struct ethsw_dev_priv *priv = NULL; ++ struct ethsw_port_priv *port_priv = NULL; ++ int err = 0; ++ ++ if (!tb[IFLA_BRIDGE_VLAN_INFO]) { ++ netdev_err(netdev, "no VLAN INFO in nlmsg\n"); ++ return -EOPNOTSUPP; ++ } ++ ++ vinfo = nla_data(tb[IFLA_BRIDGE_VLAN_INFO]); ++ ++ if (!vinfo->vid || vinfo->vid > VLAN_VID_MASK) ++ return -EINVAL; ++ ++ __get_priv(netdev, &priv, &port_priv); ++ ++ if (!port_priv || !priv->vlans[vinfo->vid]) { ++ /* command targets switch device or this is a new VLAN */ ++ err = ethsw_add_vlan(priv->netdev, vinfo->vid); ++ if (err) ++ return err; ++ ++ /* command targets switch device; mark it*/ ++ if (!port_priv) ++ priv->vlans[vinfo->vid] |= ETHSW_VLAN_GLOBAL; ++ } ++ ++ if (port_priv) { ++ /* command targets switch port */ ++ err = ethsw_port_add_vlan(netdev, vinfo->vid, vinfo->flags); ++ if (err) ++ return err; ++ } ++ ++ return 0; ++} ++ ++static const struct nla_policy ifla_brport_policy[IFLA_BRPORT_MAX + 1] = { ++ [IFLA_BRPORT_STATE] = { .type = NLA_U8 }, ++ [IFLA_BRPORT_COST] = { .type = NLA_U32 }, ++ [IFLA_BRPORT_PRIORITY] = { .type = NLA_U16 }, ++ [IFLA_BRPORT_MODE] = { .type = NLA_U8 }, ++ [IFLA_BRPORT_GUARD] = { .type = NLA_U8 }, ++ [IFLA_BRPORT_PROTECT] = { .type = NLA_U8 }, ++ [IFLA_BRPORT_LEARNING] = { .type = NLA_U8 }, ++ [IFLA_BRPORT_UNICAST_FLOOD] = { .type = NLA_U8 }, ++}; ++ ++static int ethsw_set_learning(struct net_device *netdev, u8 flag) ++{ ++ struct ethsw_dev_priv *priv = netdev_priv(netdev); ++ enum dpsw_fdb_learning_mode learn_mode; ++ int err; ++ ++ if (flag) ++ learn_mode = DPSW_FDB_LEARNING_MODE_HW; ++ else ++ learn_mode = DPSW_FDB_LEARNING_MODE_DIS; ++ ++ err = dpsw_fdb_set_learning_mode(priv->mc_io, 0, priv->dpsw_handle, ++ 0, learn_mode); ++ if (err) { ++ netdev_err(netdev, "dpsw_fdb_set_learning_mode err %d\n", err); ++ return err; ++ } ++ priv->learning = !!flag; ++ ++ return 0; ++} ++ ++static int ethsw_port_set_flood(struct net_device *netdev, u8 flag) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ struct ethsw_dev_priv *priv = port_priv->ethsw_priv; ++ int err; ++ ++ err = dpsw_if_set_flooding(priv->mc_io, 0, priv->dpsw_handle, ++ port_priv->port_index, (int)flag); ++ if (err) { ++ netdev_err(netdev, "dpsw_fdb_set_learning_mode err %d\n", err); ++ return err; ++ } ++ priv->flood = !!flag; ++ ++ return 0; ++} ++ ++static int ethsw_port_set_state(struct net_device *netdev, u8 state) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ struct ethsw_dev_priv *priv = port_priv->ethsw_priv; ++ u8 old_state = port_priv->stp_state; ++ int err; ++ ++ struct dpsw_stp_cfg stp_cfg = { ++ .vlan_id = 1, ++ .state = state, ++ }; ++ /* TODO: check port state, interface may be down */ ++ ++ if (state > BR_STATE_BLOCKING) ++ return -EINVAL; ++ ++ if (state == port_priv->stp_state) ++ return 0; ++ ++ if (state == BR_STATE_DISABLED) { ++ port_priv->stp_state = state; ++ ++ err = ethsw_port_stop(netdev); ++ if (err) ++ goto error; ++ } else { ++ err = dpsw_if_set_stp(priv->mc_io, 0, priv->dpsw_handle, ++ port_priv->port_index, &stp_cfg); ++ if (err) { ++ netdev_err(netdev, "dpsw_if_set_stp err %d\n", err); ++ return err; ++ } ++ ++ port_priv->stp_state = state; ++ ++ if (old_state == BR_STATE_DISABLED) { ++ err = ethsw_port_open(netdev); ++ if (err) ++ goto error; ++ } ++ } ++ ++ return 0; ++error: ++ port_priv->stp_state = old_state; ++ return err; ++} ++ ++static int ethsw_setlink_protinfo(struct net_device *netdev, ++ struct nlattr **tb) ++{ ++ struct ethsw_dev_priv *priv; ++ struct ethsw_port_priv *port_priv = NULL; ++ int err = 0; ++ ++ __get_priv(netdev, &priv, &port_priv); ++ ++ if (tb[IFLA_BRPORT_LEARNING]) { ++ u8 flag = nla_get_u8(tb[IFLA_BRPORT_LEARNING]); ++ ++ if (port_priv) ++ netdev_warn(netdev, ++ "learning set on whole switch dev\n"); ++ ++ err = ethsw_set_learning(priv->netdev, flag); ++ if (err) ++ return err; ++ ++ } else if (tb[IFLA_BRPORT_UNICAST_FLOOD] && port_priv) { ++ u8 flag = nla_get_u8(tb[IFLA_BRPORT_UNICAST_FLOOD]); ++ ++ err = ethsw_port_set_flood(port_priv->netdev, flag); ++ if (err) ++ return err; ++ ++ } else if (tb[IFLA_BRPORT_STATE] && port_priv) { ++ u8 state = nla_get_u8(tb[IFLA_BRPORT_STATE]); ++ ++ err = ethsw_port_set_state(port_priv->netdev, state); ++ if (err) ++ return err; ++ ++ } else { ++ return -EOPNOTSUPP; ++ } ++ ++ return 0; ++} ++ ++static int ethsw_setlink(struct net_device *netdev, ++ struct nlmsghdr *nlh, ++ u16 flags) ++{ ++ struct nlattr *attr; ++ struct nlattr *tb[(IFLA_BRIDGE_MAX > IFLA_BRPORT_MAX) ? ++ IFLA_BRIDGE_MAX : IFLA_BRPORT_MAX+1]; ++ int err = 0; ++ ++ attr = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); ++ if (attr) { ++ err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, attr, ++ ifla_br_policy); ++ if (err) { ++ netdev_err(netdev, ++ "nla_parse_nested for br_policy err %d\n", ++ err); ++ return err; ++ } ++ ++ err = ethsw_setlink_af_spec(netdev, tb); ++ return err; ++ } ++ ++ attr = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_PROTINFO); ++ if (attr) { ++ err = nla_parse_nested(tb, IFLA_BRPORT_MAX, attr, ++ ifla_brport_policy); ++ if (err) { ++ netdev_err(netdev, ++ "nla_parse_nested for brport_policy err %d\n", ++ err); ++ return err; ++ } ++ ++ err = ethsw_setlink_protinfo(netdev, tb); ++ return err; ++ } ++ ++ netdev_err(netdev, "nlmsg_find_attr found no AF_SPEC/PROTINFO\n"); ++ return -EOPNOTSUPP; ++} ++ ++static int __nla_put_netdev(struct sk_buff *skb, struct net_device *netdev, ++ struct ethsw_dev_priv *priv) ++{ ++ u8 operstate = netif_running(netdev) ? netdev->operstate : IF_OPER_DOWN; ++ int iflink; ++ int err; ++ ++ err = nla_put_string(skb, IFLA_IFNAME, netdev->name); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u32(skb, IFLA_MASTER, priv->netdev->ifindex); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u32(skb, IFLA_MTU, netdev->mtu); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_OPERSTATE, operstate); ++ if (err) ++ goto nla_put_err; ++ if (netdev->addr_len) { ++ err = nla_put(skb, IFLA_ADDRESS, netdev->addr_len, ++ netdev->dev_addr); ++ if (err) ++ goto nla_put_err; ++ } ++ ++ iflink = dev_get_iflink(netdev); ++ if (netdev->ifindex != iflink) { ++ err = nla_put_u32(skb, IFLA_LINK, iflink); ++ if (err) ++ goto nla_put_err; ++ } ++ ++ return 0; ++ ++nla_put_err: ++ netdev_err(netdev, "nla_put_ err %d\n", err); ++ return err; ++} ++ ++static int __nla_put_port(struct sk_buff *skb, struct net_device *netdev, ++ struct ethsw_port_priv *port_priv) ++{ ++ struct nlattr *nest; ++ int err; ++ ++ u8 stp_state = port_priv->stp_state; ++ ++ if (port_priv->stp_state == DPSW_STP_STATE_BLOCKING) ++ stp_state = BR_STATE_BLOCKING; ++ ++ nest = nla_nest_start(skb, IFLA_PROTINFO | NLA_F_NESTED); ++ if (!nest) { ++ netdev_err(netdev, "nla_nest_start failed\n"); ++ return -ENOMEM; ++ } ++ ++ err = nla_put_u8(skb, IFLA_BRPORT_STATE, stp_state); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u16(skb, IFLA_BRPORT_PRIORITY, 0); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u32(skb, IFLA_BRPORT_COST, 0); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_MODE, 0); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_GUARD, 0); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_PROTECT, 0); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_FAST_LEAVE, 0); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_LEARNING, ++ port_priv->ethsw_priv->learning); ++ if (err) ++ goto nla_put_err; ++ err = nla_put_u8(skb, IFLA_BRPORT_UNICAST_FLOOD, ++ port_priv->ethsw_priv->flood); ++ if (err) ++ goto nla_put_err; ++ nla_nest_end(skb, nest); ++ ++ return 0; ++ ++nla_put_err: ++ netdev_err(netdev, "nla_put_ err %d\n", err); ++ nla_nest_cancel(skb, nest); ++ return err; ++} ++ ++static int __nla_put_vlan(struct sk_buff *skb, struct net_device *netdev, ++ struct ethsw_dev_priv *priv, ++ struct ethsw_port_priv *port_priv) ++{ ++ struct nlattr *nest; ++ struct bridge_vlan_info vinfo; ++ const char *vlans; ++ u16 i; ++ int err; ++ ++ nest = nla_nest_start(skb, IFLA_AF_SPEC); ++ if (!nest) { ++ netdev_err(netdev, "nla_nest_start failed"); ++ return -ENOMEM; ++ } ++ ++ if (port_priv) ++ vlans = port_priv->vlans; ++ else ++ vlans = priv->vlans; ++ ++ for (i = 0; i < VLAN_VID_MASK+1; i++) { ++ vinfo.flags = 0; ++ vinfo.vid = i; ++ ++ if (vlans[i] & ETHSW_VLAN_UNTAGGED) ++ vinfo.flags |= BRIDGE_VLAN_INFO_UNTAGGED; ++ ++ if (vlans[i] & ETHSW_VLAN_PVID) ++ vinfo.flags |= BRIDGE_VLAN_INFO_PVID; ++ ++ if (vlans[i] & ETHSW_VLAN_MEMBER) { ++ err = nla_put(skb, IFLA_BRIDGE_VLAN_INFO, ++ sizeof(vinfo), &vinfo); ++ if (err) ++ goto nla_put_err; ++ } ++ } ++ ++ nla_nest_end(skb, nest); ++ ++ return 0; ++nla_put_err: ++ netdev_err(netdev, "nla_put_ err %d\n", err); ++ nla_nest_cancel(skb, nest); ++ return err; ++} ++ ++static int ethsw_getlink(struct sk_buff *skb, u32 pid, u32 seq, ++ struct net_device *netdev, u32 filter_mask, ++ int nlflags) ++{ ++ struct ethsw_dev_priv *priv; ++ struct ethsw_port_priv *port_priv = NULL; ++ struct ifinfomsg *hdr; ++ struct nlmsghdr *nlh; ++ int err; ++ ++ __get_priv(netdev, &priv, &port_priv); ++ ++ nlh = nlmsg_put(skb, pid, seq, RTM_NEWLINK, sizeof(*hdr), NLM_F_MULTI); ++ if (!nlh) ++ return -EMSGSIZE; ++ ++ hdr = nlmsg_data(nlh); ++ memset(hdr, 0, sizeof(*hdr)); ++ hdr->ifi_family = AF_BRIDGE; ++ hdr->ifi_type = netdev->type; ++ hdr->ifi_index = netdev->ifindex; ++ hdr->ifi_flags = dev_get_flags(netdev); ++ ++ err = __nla_put_netdev(skb, netdev, priv); ++ if (err) ++ goto nla_put_err; ++ ++ if (port_priv) { ++ err = __nla_put_port(skb, netdev, port_priv); ++ if (err) ++ goto nla_put_err; ++ } ++ ++ /* Check if the VID information is requested */ ++ if (filter_mask & RTEXT_FILTER_BRVLAN) { ++ err = __nla_put_vlan(skb, netdev, priv, port_priv); ++ if (err) ++ goto nla_put_err; ++ } ++ ++ nlmsg_end(skb, nlh); ++ return skb->len; ++ ++nla_put_err: ++ nlmsg_cancel(skb, nlh); ++ return -EMSGSIZE; ++} ++ ++static int ethsw_dellink_switch(struct ethsw_dev_priv *priv, u16 vid) ++{ ++ struct list_head *pos; ++ struct ethsw_port_priv *ppriv_local = NULL; ++ int err = 0; ++ ++ if (!priv->vlans[vid]) ++ return -ENOENT; ++ ++ err = dpsw_vlan_remove(priv->mc_io, 0, priv->dpsw_handle, vid); ++ if (err) { ++ netdev_err(priv->netdev, "dpsw_vlan_remove err %d\n", err); ++ return err; ++ } ++ priv->vlans[vid] = 0; ++ ++ list_for_each(pos, &priv->port_list) { ++ ppriv_local = list_entry(pos, struct ethsw_port_priv, ++ list); ++ ppriv_local->vlans[vid] = 0; ++ } ++ ++ return 0; ++} ++ ++static int ethsw_dellink_port(struct ethsw_dev_priv *priv, ++ struct ethsw_port_priv *port_priv, ++ u16 vid) ++{ ++ struct list_head *pos; ++ struct ethsw_port_priv *ppriv_local = NULL; ++ struct dpsw_vlan_if_cfg vcfg = { ++ .num_ifs = 1, ++ .if_id[0] = port_priv->port_index, ++ }; ++ unsigned int count = 0; ++ int err = 0; ++ ++ if (!port_priv->vlans[vid]) ++ return -ENOENT; ++ ++ /* VLAN will be deleted from switch if global flag is not set ++ * and is configured on only one port ++ */ ++ if (!(priv->vlans[vid] & ETHSW_VLAN_GLOBAL)) { ++ list_for_each(pos, &priv->port_list) { ++ ppriv_local = list_entry(pos, struct ethsw_port_priv, ++ list); ++ if (ppriv_local->vlans[vid] & ETHSW_VLAN_MEMBER) ++ count++; ++ } ++ ++ if (count == 1) ++ return ethsw_dellink_switch(priv, vid); ++ } ++ ++ err = dpsw_vlan_remove_if(priv->mc_io, 0, priv->dpsw_handle, ++ vid, &vcfg); ++ if (err) { ++ netdev_err(priv->netdev, "dpsw_vlan_remove_if err %d\n", err); ++ return err; ++ } ++ port_priv->vlans[vid] = 0; ++ return 0; ++} ++ ++static int ethsw_dellink(struct net_device *netdev, ++ struct nlmsghdr *nlh, ++ u16 flags) ++{ ++ struct nlattr *tb[IFLA_BRIDGE_MAX+1]; ++ struct nlattr *spec; ++ struct bridge_vlan_info *vinfo; ++ struct ethsw_dev_priv *priv; ++ struct ethsw_port_priv *port_priv = NULL; ++ int err = 0; ++ ++ spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); ++ if (!spec) ++ return 0; ++ ++ err = nla_parse_nested(tb, IFLA_BRIDGE_MAX, spec, ifla_br_policy); ++ if (err) ++ return err; ++ ++ if (!tb[IFLA_BRIDGE_VLAN_INFO]) ++ return -EOPNOTSUPP; ++ ++ vinfo = nla_data(tb[IFLA_BRIDGE_VLAN_INFO]); ++ ++ if (!vinfo->vid || vinfo->vid > VLAN_VID_MASK) ++ return -EINVAL; ++ ++ __get_priv(netdev, &priv, &port_priv); ++ ++ /* decide if command targets switch device or port */ ++ if (!port_priv) ++ err = ethsw_dellink_switch(priv, vinfo->vid); ++ else ++ err = ethsw_dellink_port(priv, port_priv, vinfo->vid); ++ ++ return err; ++} ++ ++static const struct net_device_ops ethsw_ops = { ++ .ndo_open = ðsw_open, ++ .ndo_stop = ðsw_stop, ++ ++ .ndo_bridge_setlink = ðsw_setlink, ++ .ndo_bridge_getlink = ðsw_getlink, ++ .ndo_bridge_dellink = ðsw_dellink, ++ ++ .ndo_start_xmit = ðsw_dropframe, ++}; ++ ++/*--------------------------------------------------------------------------- */ ++/* switch port netdevice ops */ ++ ++static int _ethsw_port_carrier_state_sync(struct net_device *netdev) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ struct dpsw_link_state state; ++ int err; ++ ++ err = dpsw_if_get_link_state(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index, &state); ++ if (unlikely(err)) { ++ netdev_err(netdev, "dpsw_if_get_link_state() err %d\n", err); ++ return err; ++ } ++ ++ WARN_ONCE(state.up > 1, "Garbage read into link_state"); ++ ++ if (state.up) ++ netif_carrier_on(port_priv->netdev); ++ else ++ netif_carrier_off(port_priv->netdev); ++ ++ return 0; ++} ++ ++static int ethsw_port_open(struct net_device *netdev) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ int err; ++ ++ if (!netif_oper_up(netdev) || ++ port_priv->stp_state == BR_STATE_DISABLED) ++ return 0; ++ ++ err = dpsw_if_enable(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index); ++ if (err) { ++ netdev_err(netdev, "dpsw_if_enable err %d\n", err); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static int ethsw_port_stop(struct net_device *netdev) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ int err; ++ ++ err = dpsw_if_disable(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index); ++ if (err) { ++ netdev_err(netdev, "dpsw_if_disable err %d\n", err); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static int ethsw_port_fdb_add_uc(struct net_device *netdev, ++ const unsigned char *addr) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ struct dpsw_fdb_unicast_cfg entry = {0}; ++ int err; ++ ++ entry.if_egress = port_priv->port_index; ++ entry.type = DPSW_FDB_ENTRY_STATIC; ++ ether_addr_copy(entry.mac_addr, addr); ++ ++ err = dpsw_fdb_add_unicast(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ 0, &entry); ++ if (err) ++ netdev_err(netdev, "dpsw_fdb_add_unicast err %d\n", err); ++ return err; ++} ++ ++static int ethsw_port_fdb_del_uc(struct net_device *netdev, ++ const unsigned char *addr) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ struct dpsw_fdb_unicast_cfg entry = {0}; ++ int err; ++ ++ entry.if_egress = port_priv->port_index; ++ entry.type = DPSW_FDB_ENTRY_STATIC; ++ ether_addr_copy(entry.mac_addr, addr); ++ ++ err = dpsw_fdb_remove_unicast(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ 0, &entry); ++ if (err) ++ netdev_err(netdev, "dpsw_fdb_remove_unicast err %d\n", err); ++ return err; ++} ++ ++static int ethsw_port_fdb_add_mc(struct net_device *netdev, ++ const unsigned char *addr) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ struct dpsw_fdb_multicast_cfg entry = {0}; ++ int err; ++ ++ ether_addr_copy(entry.mac_addr, addr); ++ entry.type = DPSW_FDB_ENTRY_STATIC; ++ entry.num_ifs = 1; ++ entry.if_id[0] = port_priv->port_index; ++ ++ err = dpsw_fdb_add_multicast(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ 0, &entry); ++ if (err) ++ netdev_err(netdev, "dpsw_fdb_add_multicast err %d\n", err); ++ return err; ++} ++ ++static int ethsw_port_fdb_del_mc(struct net_device *netdev, ++ const unsigned char *addr) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ struct dpsw_fdb_multicast_cfg entry = {0}; ++ int err; ++ ++ ether_addr_copy(entry.mac_addr, addr); ++ entry.type = DPSW_FDB_ENTRY_STATIC; ++ entry.num_ifs = 1; ++ entry.if_id[0] = port_priv->port_index; ++ ++ err = dpsw_fdb_remove_multicast(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ 0, &entry); ++ if (err) ++ netdev_err(netdev, "dpsw_fdb_remove_multicast err %d\n", err); ++ return err; ++} ++ ++static int _lookup_address(struct net_device *netdev, int is_uc, ++ const unsigned char *addr) ++{ ++ struct netdev_hw_addr *ha; ++ struct netdev_hw_addr_list *list = (is_uc) ? &netdev->uc : &netdev->mc; ++ ++ netif_addr_lock_bh(netdev); ++ list_for_each_entry(ha, &list->list, list) { ++ if (ether_addr_equal(ha->addr, addr)) { ++ netif_addr_unlock_bh(netdev); ++ return 1; ++ } ++ } ++ netif_addr_unlock_bh(netdev); ++ return 0; ++} ++ ++static int ethsw_port_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], ++ struct net_device *netdev, ++ const unsigned char *addr, u16 vid, ++ u16 flags) ++{ ++ struct list_head *pos; ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ struct ethsw_dev_priv *priv = port_priv->ethsw_priv; ++ int err; ++ ++ /* TODO: add replace support when added to iproute bridge */ ++ if (!(flags & NLM_F_REQUEST)) { ++ netdev_err(netdev, ++ "ethsw_port_fdb_add unexpected flags value %08x\n", ++ flags); ++ return -EINVAL; ++ } ++ ++ if (is_unicast_ether_addr(addr)) { ++ /* if entry cannot be replaced, return error if exists */ ++ if (flags & NLM_F_EXCL || flags & NLM_F_APPEND) { ++ list_for_each(pos, &priv->port_list) { ++ port_priv = list_entry(pos, ++ struct ethsw_port_priv, ++ list); ++ if (_lookup_address(port_priv->netdev, ++ 1, addr)) ++ return -EEXIST; ++ } ++ } ++ ++ err = ethsw_port_fdb_add_uc(netdev, addr); ++ if (err) { ++ netdev_err(netdev, "ethsw_port_fdb_add_uc err %d\n", ++ err); ++ return err; ++ } ++ ++ /* we might have replaced an existing entry for a different ++ * switch port, make sure the address doesn't linger in any ++ * port address list ++ */ ++ list_for_each(pos, &priv->port_list) { ++ port_priv = list_entry(pos, struct ethsw_port_priv, ++ list); ++ dev_uc_del(port_priv->netdev, addr); ++ } ++ ++ err = dev_uc_add(netdev, addr); ++ if (err) { ++ netdev_err(netdev, "dev_uc_add err %d\n", err); ++ return err; ++ } ++ } else { ++ struct dpsw_fdb_multicast_cfg entry = { ++ .type = DPSW_FDB_ENTRY_STATIC, ++ .num_ifs = 0, ++ }; ++ ++ /* check if address is already set on this port */ ++ if (_lookup_address(netdev, 0, addr)) ++ return -EEXIST; ++ ++ /* check if the address exists on other port */ ++ ether_addr_copy(entry.mac_addr, addr); ++ err = dpsw_fdb_get_multicast(priv->mc_io, 0, priv->dpsw_handle, ++ 0, &entry); ++ if (!err) { ++ /* entry exists, can we replace it? */ ++ if (flags & NLM_F_EXCL) ++ return -EEXIST; ++ } else if (err != -ENAVAIL) { ++ netdev_err(netdev, "dpsw_fdb_get_unicast err %d\n", ++ err); ++ return err; ++ } ++ ++ err = ethsw_port_fdb_add_mc(netdev, addr); ++ if (err) { ++ netdev_err(netdev, "ethsw_port_fdb_add_mc err %d\n", ++ err); ++ return err; ++ } ++ ++ err = dev_mc_add(netdev, addr); ++ if (err) { ++ netdev_err(netdev, "dev_mc_add err %d\n", err); ++ return err; ++ } ++ } ++ ++ return 0; ++} ++ ++static int ethsw_port_fdb_del(struct ndmsg *ndm, struct nlattr *tb[], ++ struct net_device *netdev, ++ const unsigned char *addr, u16 vid) ++{ ++ int err; ++ ++ if (is_unicast_ether_addr(addr)) { ++ err = ethsw_port_fdb_del_uc(netdev, addr); ++ if (err) { ++ netdev_err(netdev, "ethsw_port_fdb_del_uc err %d\n", ++ err); ++ return err; ++ } ++ ++ /* also delete if configured on port */ ++ err = dev_uc_del(netdev, addr); ++ if (err && err != -ENOENT) { ++ netdev_err(netdev, "dev_uc_del err %d\n", err); ++ return err; ++ } ++ } else { ++ if (!_lookup_address(netdev, 0, addr)) ++ return -ENOENT; ++ ++ err = dev_mc_del(netdev, addr); ++ if (err) { ++ netdev_err(netdev, "dev_mc_del err %d\n", err); ++ return err; ++ } ++ ++ err = ethsw_port_fdb_del_mc(netdev, addr); ++ if (err) { ++ netdev_err(netdev, "ethsw_port_fdb_del_mc err %d\n", ++ err); ++ return err; ++ } ++ } ++ ++ return 0; ++} ++ ++static struct rtnl_link_stats64 * ++ethsw_port_get_stats(struct net_device *netdev, ++ struct rtnl_link_stats64 *storage) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ u64 tmp; ++ int err; ++ ++ err = dpsw_if_get_counter(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index, ++ DPSW_CNT_ING_FRAME, &storage->rx_packets); ++ if (err) ++ goto error; ++ ++ err = dpsw_if_get_counter(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index, ++ DPSW_CNT_EGR_FRAME, &storage->tx_packets); ++ if (err) ++ goto error; ++ ++ err = dpsw_if_get_counter(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index, ++ DPSW_CNT_ING_BYTE, &storage->rx_bytes); ++ if (err) ++ goto error; ++ ++ err = dpsw_if_get_counter(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index, ++ DPSW_CNT_EGR_BYTE, &storage->tx_bytes); ++ if (err) ++ goto error; ++ ++ err = dpsw_if_get_counter(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index, ++ DPSW_CNT_ING_FRAME_DISCARD, ++ &storage->rx_dropped); ++ if (err) ++ goto error; ++ ++ err = dpsw_if_get_counter(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index, ++ DPSW_CNT_ING_FLTR_FRAME, ++ &tmp); ++ if (err) ++ goto error; ++ storage->rx_dropped += tmp; ++ ++ err = dpsw_if_get_counter(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index, ++ DPSW_CNT_EGR_FRAME_DISCARD, ++ &storage->tx_dropped); ++ if (err) ++ goto error; ++ ++ return storage; ++ ++error: ++ netdev_err(netdev, "dpsw_if_get_counter err %d\n", err); ++ return storage; ++} ++ ++static const struct net_device_ops ethsw_port_ops = { ++ .ndo_open = ðsw_port_open, ++ .ndo_stop = ðsw_port_stop, ++ ++ .ndo_fdb_add = ðsw_port_fdb_add, ++ .ndo_fdb_del = ðsw_port_fdb_del, ++ .ndo_fdb_dump = &ndo_dflt_fdb_dump, ++ ++ .ndo_get_stats64 = ðsw_port_get_stats, ++ ++ .ndo_start_xmit = ðsw_dropframe, ++}; ++ ++static struct { ++ enum dpsw_counter id; ++ char name[ETH_GSTRING_LEN]; ++} ethsw_ethtool_counters[] = { ++ {DPSW_CNT_ING_FRAME, "rx frames"}, ++ {DPSW_CNT_ING_BYTE, "rx bytes"}, ++ {DPSW_CNT_ING_FLTR_FRAME, "rx filtered frames"}, ++ {DPSW_CNT_ING_FRAME_DISCARD, "rx discarded frames"}, ++ {DPSW_CNT_ING_BCAST_FRAME, "rx b-cast frames"}, ++ {DPSW_CNT_ING_BCAST_BYTES, "rx b-cast bytes"}, ++ {DPSW_CNT_ING_MCAST_FRAME, "rx m-cast frames"}, ++ {DPSW_CNT_ING_MCAST_BYTE, "rx m-cast bytes"}, ++ {DPSW_CNT_EGR_FRAME, "tx frames"}, ++ {DPSW_CNT_EGR_BYTE, "tx bytes"}, ++ {DPSW_CNT_EGR_FRAME_DISCARD, "tx discarded frames"}, ++ ++}; ++ ++static int ethsw_ethtool_get_sset_count(struct net_device *dev, int sset) ++{ ++ switch (sset) { ++ case ETH_SS_STATS: ++ return ARRAY_SIZE(ethsw_ethtool_counters); ++ default: ++ return -EOPNOTSUPP; ++ } ++} ++ ++static void ethsw_ethtool_get_strings(struct net_device *netdev, ++ u32 stringset, u8 *data) ++{ ++ int i; ++ ++ switch (stringset) { ++ case ETH_SS_STATS: ++ for (i = 0; i < ARRAY_SIZE(ethsw_ethtool_counters); i++) ++ memcpy(data + i * ETH_GSTRING_LEN, ++ ethsw_ethtool_counters[i].name, ETH_GSTRING_LEN); ++ break; ++ } ++} ++ ++static void ethsw_ethtool_get_stats(struct net_device *netdev, ++ struct ethtool_stats *stats, ++ u64 *data) ++{ ++ struct ethsw_port_priv *port_priv = netdev_priv(netdev); ++ int i; ++ int err; ++ ++ for (i = 0; i < ARRAY_SIZE(ethsw_ethtool_counters); i++) { ++ err = dpsw_if_get_counter(port_priv->ethsw_priv->mc_io, 0, ++ port_priv->ethsw_priv->dpsw_handle, ++ port_priv->port_index, ++ ethsw_ethtool_counters[i].id, ++ &data[i]); ++ if (err) ++ netdev_err(netdev, "dpsw_if_get_counter[%s] err %d\n", ++ ethsw_ethtool_counters[i].name, err); ++ } ++} ++ ++static const struct ethtool_ops ethsw_port_ethtool_ops = { ++ .get_strings = ðsw_ethtool_get_strings, ++ .get_ethtool_stats = ðsw_ethtool_get_stats, ++ .get_sset_count = ðsw_ethtool_get_sset_count, ++}; ++ ++/* -------------------------------------------------------------------------- */ ++/* ethsw driver functions */ ++ ++static int ethsw_links_state_update(struct ethsw_dev_priv *priv) ++{ ++ struct list_head *pos; ++ struct ethsw_port_priv *port_priv; ++ int err; ++ ++ list_for_each(pos, &priv->port_list) { ++ port_priv = list_entry(pos, struct ethsw_port_priv, ++ list); ++ ++ err = _ethsw_port_carrier_state_sync(port_priv->netdev); ++ if (err) ++ netdev_err(port_priv->netdev, ++ "_ethsw_port_carrier_state_sync err %d\n", ++ err); ++ } ++ ++ return 0; ++} ++ ++static irqreturn_t ethsw_irq0_handler(int irq_num, void *arg) ++{ ++ return IRQ_WAKE_THREAD; ++} ++ ++static irqreturn_t _ethsw_irq0_handler_thread(int irq_num, void *arg) ++{ ++ struct device *dev = (struct device *)arg; ++ struct fsl_mc_device *sw_dev = to_fsl_mc_device(dev); ++ struct net_device *netdev = dev_get_drvdata(dev); ++ struct ethsw_dev_priv *priv = netdev_priv(netdev); ++ ++ struct fsl_mc_io *io = priv->mc_io; ++ uint16_t token = priv->dpsw_handle; ++ int irq_index = DPSW_IRQ_INDEX_IF; ++ ++ /* Mask the events and the if_id reserved bits to be cleared on read */ ++ uint32_t status = DPSW_IRQ_EVENT_LINK_CHANGED | 0xFFFF0000; ++ int err; ++ ++ /* Sanity check */ ++ if (WARN_ON(!sw_dev || !sw_dev->irqs || !sw_dev->irqs[irq_index])) ++ goto out; ++ if (WARN_ON(sw_dev->irqs[irq_index]->msi_desc->irq != irq_num)) ++ goto out; ++ ++ err = dpsw_get_irq_status(io, 0, token, irq_index, &status); ++ if (unlikely(err)) { ++ netdev_err(netdev, "Can't get irq status (err %d)", err); ++ ++ err = dpsw_clear_irq_status(io, 0, token, irq_index, ++ 0xFFFFFFFF); ++ if (unlikely(err)) ++ netdev_err(netdev, "Can't clear irq status (err %d)", ++ err); ++ goto out; ++ } ++ ++ if (status & DPSW_IRQ_EVENT_LINK_CHANGED) { ++ err = ethsw_links_state_update(priv); ++ if (unlikely(err)) ++ goto out; ++ } ++ ++out: ++ return IRQ_HANDLED; ++} ++ ++static int ethsw_setup_irqs(struct fsl_mc_device *sw_dev) ++{ ++ struct device *dev = &sw_dev->dev; ++ struct net_device *netdev = dev_get_drvdata(dev); ++ struct ethsw_dev_priv *priv = netdev_priv(netdev); ++ int err = 0; ++ struct fsl_mc_device_irq *irq; ++ const int irq_index = DPSW_IRQ_INDEX_IF; ++ uint32_t mask = DPSW_IRQ_EVENT_LINK_CHANGED; ++ ++ err = fsl_mc_allocate_irqs(sw_dev); ++ if (unlikely(err)) { ++ dev_err(dev, "MC irqs allocation failed\n"); ++ return err; ++ } ++ ++ if (WARN_ON(sw_dev->obj_desc.irq_count != DPSW_MAX_IRQ_NUM)) { ++ err = -EINVAL; ++ goto free_irq; ++ } ++ ++ err = dpsw_set_irq_enable(priv->mc_io, 0, priv->dpsw_handle, ++ irq_index, 0); ++ if (unlikely(err)) { ++ dev_err(dev, "dpsw_set_irq_enable err %d\n", err); ++ goto free_irq; ++ } ++ ++ irq = sw_dev->irqs[irq_index]; ++ ++ err = devm_request_threaded_irq(dev, irq->msi_desc->irq, ++ ethsw_irq0_handler, ++ _ethsw_irq0_handler_thread, ++ IRQF_NO_SUSPEND | IRQF_ONESHOT, ++ dev_name(dev), dev); ++ if (unlikely(err)) { ++ dev_err(dev, "devm_request_threaded_irq(): %d", err); ++ goto free_irq; ++ } ++ ++ err = dpsw_set_irq_mask(priv->mc_io, 0, priv->dpsw_handle, ++ irq_index, mask); ++ if (unlikely(err)) { ++ dev_err(dev, "dpsw_set_irq_mask(): %d", err); ++ goto free_devm_irq; ++ } ++ ++ err = dpsw_set_irq_enable(priv->mc_io, 0, priv->dpsw_handle, ++ irq_index, 1); ++ if (unlikely(err)) { ++ dev_err(dev, "dpsw_set_irq_enable(): %d", err); ++ goto free_devm_irq; ++ } ++ ++ return 0; ++ ++free_devm_irq: ++ devm_free_irq(dev, irq->msi_desc->irq, dev); ++free_irq: ++ fsl_mc_free_irqs(sw_dev); ++ return err; ++} ++ ++static void ethsw_teardown_irqs(struct fsl_mc_device *sw_dev) ++{ ++ struct device *dev = &sw_dev->dev; ++ struct net_device *netdev = dev_get_drvdata(dev); ++ struct ethsw_dev_priv *priv = netdev_priv(netdev); ++ ++ dpsw_set_irq_enable(priv->mc_io, 0, priv->dpsw_handle, ++ DPSW_IRQ_INDEX_IF, 0); ++ devm_free_irq(dev, ++ sw_dev->irqs[DPSW_IRQ_INDEX_IF]->msi_desc->irq, ++ dev); ++ fsl_mc_free_irqs(sw_dev); ++} ++ ++static int __cold ++ethsw_init(struct fsl_mc_device *sw_dev) ++{ ++ struct device *dev = &sw_dev->dev; ++ struct ethsw_dev_priv *priv; ++ struct net_device *netdev; ++ int err = 0; ++ u16 i; ++ const struct dpsw_stp_cfg stp_cfg = { ++ .vlan_id = 1, ++ .state = DPSW_STP_STATE_FORWARDING, ++ }; ++ ++ netdev = dev_get_drvdata(dev); ++ priv = netdev_priv(netdev); ++ ++ priv->dev_id = sw_dev->obj_desc.id; ++ ++ err = dpsw_open(priv->mc_io, 0, priv->dev_id, &priv->dpsw_handle); ++ if (err) { ++ dev_err(dev, "dpsw_open err %d\n", err); ++ goto err_exit; ++ } ++ if (!priv->dpsw_handle) { ++ dev_err(dev, "dpsw_open returned null handle but no error\n"); ++ err = -EFAULT; ++ goto err_exit; ++ } ++ ++ err = dpsw_get_attributes(priv->mc_io, 0, priv->dpsw_handle, ++ &priv->sw_attr); ++ if (err) { ++ dev_err(dev, "dpsw_get_attributes err %d\n", err); ++ goto err_close; ++ } ++ ++ /* Minimum supported DPSW version check */ ++ if (priv->sw_attr.version.major < DPSW_MIN_VER_MAJOR || ++ (priv->sw_attr.version.major == DPSW_MIN_VER_MAJOR && ++ priv->sw_attr.version.minor < DPSW_MIN_VER_MINOR)) { ++ dev_err(dev, "DPSW version %d:%d not supported. Use %d.%d or greater.\n", ++ priv->sw_attr.version.major, ++ priv->sw_attr.version.minor, ++ DPSW_MIN_VER_MAJOR, DPSW_MIN_VER_MINOR); ++ err = -ENOTSUPP; ++ goto err_close; ++ } ++ ++ err = dpsw_reset(priv->mc_io, 0, priv->dpsw_handle); ++ if (err) { ++ dev_err(dev, "dpsw_reset err %d\n", err); ++ goto err_close; ++ } ++ ++ err = dpsw_fdb_set_learning_mode(priv->mc_io, 0, priv->dpsw_handle, 0, ++ DPSW_FDB_LEARNING_MODE_HW); ++ if (err) { ++ dev_err(dev, "dpsw_fdb_set_learning_mode err %d\n", err); ++ goto err_close; ++ } ++ ++ for (i = 0; i < priv->sw_attr.num_ifs; i++) { ++ err = dpsw_if_set_stp(priv->mc_io, 0, priv->dpsw_handle, i, ++ &stp_cfg); ++ if (err) { ++ dev_err(dev, "dpsw_if_set_stp err %d for port %d\n", ++ err, i); ++ goto err_close; ++ } ++ ++ err = dpsw_if_set_broadcast(priv->mc_io, 0, ++ priv->dpsw_handle, i, 1); ++ if (err) { ++ dev_err(dev, ++ "dpsw_if_set_broadcast err %d for port %d\n", ++ err, i); ++ goto err_close; ++ } ++ } ++ ++ return 0; ++ ++err_close: ++ dpsw_close(priv->mc_io, 0, priv->dpsw_handle); ++err_exit: ++ return err; ++} ++ ++static int __cold ++ethsw_takedown(struct fsl_mc_device *sw_dev) ++{ ++ struct device *dev = &sw_dev->dev; ++ struct net_device *netdev; ++ struct ethsw_dev_priv *priv; ++ int err; ++ ++ netdev = dev_get_drvdata(dev); ++ priv = netdev_priv(netdev); ++ ++ err = dpsw_close(priv->mc_io, 0, priv->dpsw_handle); ++ if (err) ++ dev_warn(dev, "dpsw_close err %d\n", err); ++ ++ return 0; ++} ++ ++static int __cold ++ethsw_remove(struct fsl_mc_device *sw_dev) ++{ ++ struct device *dev; ++ struct net_device *netdev; ++ struct ethsw_dev_priv *priv; ++ struct ethsw_port_priv *port_priv; ++ struct list_head *pos; ++ ++ dev = &sw_dev->dev; ++ netdev = dev_get_drvdata(dev); ++ priv = netdev_priv(netdev); ++ ++ list_for_each(pos, &priv->port_list) { ++ port_priv = list_entry(pos, struct ethsw_port_priv, list); ++ ++ rtnl_lock(); ++ netdev_upper_dev_unlink(port_priv->netdev, netdev); ++ rtnl_unlock(); ++ ++ unregister_netdev(port_priv->netdev); ++ free_netdev(port_priv->netdev); ++ } ++ ++ ethsw_teardown_irqs(sw_dev); ++ ++ unregister_netdev(netdev); ++ ++ ethsw_takedown(sw_dev); ++ fsl_mc_portal_free(priv->mc_io); ++ ++ dev_set_drvdata(dev, NULL); ++ free_netdev(netdev); ++ ++ return 0; ++} ++ ++static int __cold ++ethsw_probe(struct fsl_mc_device *sw_dev) ++{ ++ struct device *dev; ++ struct net_device *netdev = NULL; ++ struct ethsw_dev_priv *priv = NULL; ++ int err = 0; ++ u16 i; ++ const char def_mcast[ETH_ALEN] = { ++ 0x01, 0x00, 0x5e, 0x00, 0x00, 0x01, ++ }; ++ char port_name[IFNAMSIZ]; ++ ++ dev = &sw_dev->dev; ++ ++ /* register switch device, it's for management only - no I/O */ ++ netdev = alloc_etherdev(sizeof(*priv)); ++ if (!netdev) { ++ dev_err(dev, "alloc_etherdev error\n"); ++ return -ENOMEM; ++ } ++ netdev->netdev_ops = ðsw_ops; ++ ++ SET_NETDEV_DEV(netdev, dev); ++ dev_set_drvdata(dev, netdev); ++ ++ priv = netdev_priv(netdev); ++ priv->netdev = netdev; ++ ++ err = fsl_mc_portal_allocate(sw_dev, 0, &priv->mc_io); ++ if (err) { ++ dev_err(dev, "fsl_mc_portal_allocate err %d\n", err); ++ goto err_free_netdev; ++ } ++ if (!priv->mc_io) { ++ dev_err(dev, "fsl_mc_portal_allocate returned null handle but no error\n"); ++ err = -EFAULT; ++ goto err_free_netdev; ++ } ++ ++ err = ethsw_init(sw_dev); ++ if (err) { ++ dev_err(dev, "switch init err %d\n", err); ++ goto err_free_cmdport; ++ } ++ ++ netdev->flags = netdev->flags | IFF_PROMISC | IFF_MASTER; ++ ++ /* TODO: should we hold rtnl_lock here? We can't register_netdev under ++ * lock ++ */ ++ dev_alloc_name(netdev, "sw%d"); ++ err = register_netdev(netdev); ++ if (err < 0) { ++ dev_err(dev, "register_netdev error %d\n", err); ++ goto err_takedown; ++ } ++ if (err) ++ dev_info(dev, "register_netdev res %d\n", err); ++ ++ /* VLAN 1 is implicitly configured on the switch */ ++ priv->vlans[1] = ETHSW_VLAN_MEMBER; ++ /* Flooding, learning are implicitly enabled */ ++ priv->learning = true; ++ priv->flood = true; ++ ++ /* register switch ports */ ++ snprintf(port_name, IFNAMSIZ, "%sp%%d", netdev->name); ++ ++ INIT_LIST_HEAD(&priv->port_list); ++ for (i = 0; i < priv->sw_attr.num_ifs; i++) { ++ struct net_device *port_netdev; ++ struct ethsw_port_priv *port_priv; ++ ++ port_netdev = alloc_etherdev(sizeof(struct ethsw_port_priv)); ++ if (!port_netdev) { ++ dev_err(dev, "alloc_etherdev error\n"); ++ goto err_takedown; ++ } ++ ++ port_priv = netdev_priv(port_netdev); ++ port_priv->netdev = port_netdev; ++ port_priv->ethsw_priv = priv; ++ ++ port_priv->port_index = i; ++ port_priv->stp_state = BR_STATE_FORWARDING; ++ /* VLAN 1 is configured by default on all switch ports */ ++ port_priv->vlans[1] = ETHSW_VLAN_MEMBER | ETHSW_VLAN_UNTAGGED | ++ ETHSW_VLAN_PVID; ++ ++ SET_NETDEV_DEV(port_netdev, dev); ++ port_netdev->netdev_ops = ðsw_port_ops; ++ port_netdev->ethtool_ops = ðsw_port_ethtool_ops; ++ ++ port_netdev->flags = port_netdev->flags | ++ IFF_PROMISC | IFF_SLAVE; ++ ++ dev_alloc_name(port_netdev, port_name); ++ err = register_netdev(port_netdev); ++ if (err < 0) { ++ dev_err(dev, "register_netdev error %d\n", err); ++ free_netdev(port_netdev); ++ goto err_takedown; ++ } ++ ++ rtnl_lock(); ++ ++ err = netdev_master_upper_dev_link(port_netdev, netdev, NULL, NULL); ++ if (err) { ++ dev_err(dev, "netdev_master_upper_dev_link error %d\n", ++ err); ++ unregister_netdev(port_netdev); ++ free_netdev(port_netdev); ++ rtnl_unlock(); ++ goto err_takedown; ++ } ++ ++ rtmsg_ifinfo(RTM_NEWLINK, port_netdev, IFF_SLAVE, GFP_KERNEL); ++ ++ rtnl_unlock(); ++ ++ list_add(&port_priv->list, &priv->port_list); ++ ++ /* TODO: implmenet set_rm_mode instead of this */ ++ err = ethsw_port_fdb_add_mc(port_netdev, def_mcast); ++ if (err) ++ dev_warn(&netdev->dev, ++ "ethsw_port_fdb_add_mc err %d\n", err); ++ ++ ++ /* sync carrier state */ ++ err = _ethsw_port_carrier_state_sync(port_netdev); ++ if (err) ++ netdev_err(netdev, ++ "_ethsw_port_carrier_state_sync err %d\n", ++ err); ++ } ++ ++ /* the switch starts up enabled */ ++ rtnl_lock(); ++ err = dev_open(netdev); ++ rtnl_unlock(); ++ if (err) ++ dev_warn(dev, "dev_open err %d\n", err); ++ ++ /* setup irqs */ ++ err = ethsw_setup_irqs(sw_dev); ++ if (unlikely(err)) { ++ dev_warn(dev, "ethsw_setup_irqs err %d\n", err); ++ goto err_takedown; ++ } ++ ++ dev_info(&netdev->dev, ++ "probed %d port switch\n", priv->sw_attr.num_ifs); ++ return 0; ++ ++err_takedown: ++ ethsw_remove(sw_dev); ++err_free_cmdport: ++ fsl_mc_portal_free(priv->mc_io); ++err_free_netdev: ++ dev_set_drvdata(dev, NULL); ++ free_netdev(netdev); ++ ++ return err; ++} ++ ++static const struct fsl_mc_device_match_id ethsw_match_id_table[] = { ++ { ++ .vendor = FSL_MC_VENDOR_FREESCALE, ++ .obj_type = "dpsw", ++ .ver_major = DPSW_VER_MAJOR, ++ .ver_minor = DPSW_VER_MINOR, ++ }, ++ {} ++}; ++ ++static struct fsl_mc_driver eth_sw_drv = { ++ .driver = { ++ .name = KBUILD_MODNAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = ethsw_probe, ++ .remove = ethsw_remove, ++ .match_id_table = ethsw_match_id_table, ++}; ++ ++module_fsl_mc_driver(eth_sw_drv); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("DPAA2 Ethernet Switch Driver (prototype)"); +--- a/drivers/staging/fsl-mc/include/net.h ++++ b/drivers/staging/fsl-mc/include/net.h +@@ -367,7 +367,6 @@ + /*************************** GTP fields ************************************/ + #define NH_FLD_GTP_TEID (1) + +- + /* Protocol options */ + + /* Ethernet options */ diff --git a/target/linux/layerscape/patches-4.4/7221-dpaa2-ethsw-match-id-cleanup.patch b/target/linux/layerscape/patches-4.4/7221-dpaa2-ethsw-match-id-cleanup.patch new file mode 100644 index 0000000000..eac1340266 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7221-dpaa2-ethsw-match-id-cleanup.patch @@ -0,0 +1,26 @@ +From 535826c8b725f752e5da17ea576d6d96e7d53f13 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Fri, 15 Jul 2016 13:13:41 -0500 +Subject: [PATCH 221/226] dpaa2-ethsw: match id cleanup + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/ethsw/switch.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +--- a/drivers/staging/fsl-dpaa2/ethsw/switch.c ++++ b/drivers/staging/fsl-dpaa2/ethsw/switch.c +@@ -1685,12 +1685,10 @@ err_free_netdev: + return err; + } + +-static const struct fsl_mc_device_match_id ethsw_match_id_table[] = { ++static const struct fsl_mc_device_id ethsw_match_id_table[] = { + { + .vendor = FSL_MC_VENDOR_FREESCALE, + .obj_type = "dpsw", +- .ver_major = DPSW_VER_MAJOR, +- .ver_minor = DPSW_VER_MINOR, + }, + {} + }; diff --git a/target/linux/layerscape/patches-4.4/7222-dpaa2-ethsw-fix-compile-error-on-backport-to-4.4.patch b/target/linux/layerscape/patches-4.4/7222-dpaa2-ethsw-fix-compile-error-on-backport-to-4.4.patch new file mode 100644 index 0000000000..16499218af --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7222-dpaa2-ethsw-fix-compile-error-on-backport-to-4.4.patch @@ -0,0 +1,21 @@ +From c51ed10a001d3fd5b80b7bb92f2d5182f1d9fa5a Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Thu, 25 Aug 2016 16:10:12 -0500 +Subject: [PATCH 222/226] dpaa2-ethsw: fix compile error on backport to 4.4 + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/ethsw/switch.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/fsl-dpaa2/ethsw/switch.c ++++ b/drivers/staging/fsl-dpaa2/ethsw/switch.c +@@ -1625,7 +1625,7 @@ ethsw_probe(struct fsl_mc_device *sw_dev + + rtnl_lock(); + +- err = netdev_master_upper_dev_link(port_netdev, netdev, NULL, NULL); ++ err = netdev_master_upper_dev_link(port_netdev, netdev); + if (err) { + dev_err(dev, "netdev_master_upper_dev_link error %d\n", + err); diff --git a/target/linux/layerscape/patches-4.4/7223-irqdomain-Added-domain-bus-token-DOMAIN_BUS_FSL_MC_M.patch b/target/linux/layerscape/patches-4.4/7223-irqdomain-Added-domain-bus-token-DOMAIN_BUS_FSL_MC_M.patch new file mode 100644 index 0000000000..1d719e0887 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7223-irqdomain-Added-domain-bus-token-DOMAIN_BUS_FSL_MC_M.patch @@ -0,0 +1,26 @@ +From b565bd9a6011819ff66bd4fa0a50f7e54dff2753 Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:19 -0600 +Subject: [PATCH 223/226] irqdomain: Added domain bus token + DOMAIN_BUS_FSL_MC_MSI + +Since an FSL-MC bus is a new bus type that is neither PCI nor +PLATFORM, we need a new domain bus token to disambiguate the +IRQ domain for FSL-MC MSIs. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + include/linux/irqdomain.h | 1 + + 1 file changed, 1 insertion(+) + +--- a/include/linux/irqdomain.h ++++ b/include/linux/irqdomain.h +@@ -73,6 +73,7 @@ enum irq_domain_bus_token { + DOMAIN_BUS_PCI_MSI, + DOMAIN_BUS_PLATFORM_MSI, + DOMAIN_BUS_NEXUS, ++ DOMAIN_BUS_FSL_MC_MSI, + }; + + /** diff --git a/target/linux/layerscape/patches-4.4/7224-fsl-mc-msi-Added-FSL-MC-specific-member-to-the-msi_d.patch b/target/linux/layerscape/patches-4.4/7224-fsl-mc-msi-Added-FSL-MC-specific-member-to-the-msi_d.patch new file mode 100644 index 0000000000..8dd11f4160 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7224-fsl-mc-msi-Added-FSL-MC-specific-member-to-the-msi_d.patch @@ -0,0 +1,40 @@ +From 359c7977e003781024154da61e55181b92b12bdf Mon Sep 17 00:00:00 2001 +From: "J. German Rivera" +Date: Wed, 6 Jan 2016 16:03:20 -0600 +Subject: [PATCH 224/226] fsl-mc: msi: Added FSL-MC-specific member to the + msi_desc's union + +FSL-MC is a bus type different from PCI and platform, so it needs +its own member in the msi_desc's union. + +Signed-off-by: J. German Rivera +Signed-off-by: Greg Kroah-Hartman +--- + include/linux/msi.h | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/include/linux/msi.h ++++ b/include/linux/msi.h +@@ -33,6 +33,14 @@ struct platform_msi_desc { + }; + + /** ++ * fsl_mc_msi_desc - FSL-MC device specific msi descriptor data ++ * @msi_index: The index of the MSI descriptor ++ */ ++struct fsl_mc_msi_desc { ++ u16 msi_index; ++}; ++ ++/** + * struct msi_desc - Descriptor structure for MSI based interrupts + * @list: List head for management + * @irq: The base interrupt number +@@ -87,6 +95,7 @@ struct msi_desc { + * tree wide cleanup. + */ + struct platform_msi_desc platform; ++ struct fsl_mc_msi_desc fsl_mc; + }; + }; + diff --git a/target/linux/layerscape/patches-4.4/7225-dpaa2-evb-fix-4.4-backport-compile-error.patch b/target/linux/layerscape/patches-4.4/7225-dpaa2-evb-fix-4.4-backport-compile-error.patch new file mode 100644 index 0000000000..2815d46e36 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7225-dpaa2-evb-fix-4.4-backport-compile-error.patch @@ -0,0 +1,21 @@ +From dbdf9b1fe83f88090d88bce980885df4fac46162 Mon Sep 17 00:00:00 2001 +From: Stuart Yoder +Date: Thu, 25 Aug 2016 11:17:52 -0500 +Subject: [PATCH 225/226] dpaa2-evb: fix 4.4 backport compile error + +Signed-off-by: Stuart Yoder +--- + drivers/staging/fsl-dpaa2/evb/evb.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/staging/fsl-dpaa2/evb/evb.c ++++ b/drivers/staging/fsl-dpaa2/evb/evb.c +@@ -1153,7 +1153,7 @@ static int evb_probe(struct fsl_mc_devic + } + + rtnl_lock(); +- err = netdev_master_upper_dev_link(port_netdev, netdev, NULL, NULL); ++ err = netdev_master_upper_dev_link(port_netdev, netdev); + if (unlikely(err)) { + dev_err(dev, "netdev_master_upper_dev_link err %d\n", + err); diff --git a/target/linux/layerscape/patches-4.4/8136-drivers-mmc-Add-compatible-string-for-LS1088A.patch b/target/linux/layerscape/patches-4.4/8136-drivers-mmc-Add-compatible-string-for-LS1088A.patch new file mode 100644 index 0000000000..cf0cecf786 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8136-drivers-mmc-Add-compatible-string-for-LS1088A.patch @@ -0,0 +1,24 @@ +From f6f7c6ecdecfb75412a17205d9ac4905f6bc2851 Mon Sep 17 00:00:00 2001 +From: Rai Harninder +Date: Thu, 18 Feb 2016 16:35:35 +0530 +Subject: [PATCH 136/141] drivers/mmc: Add compatible string for LS1088A + +Signed-off-by: Rai Harninder +Signed-off-by: Pratiyush Mohan Srivastava +Signed-off-by: Raghav Dogra +--- + drivers/mmc/host/sdhci-pltfm.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/mmc/host/sdhci-pltfm.c ++++ b/drivers/mmc/host/sdhci-pltfm.c +@@ -93,6 +93,9 @@ void sdhci_get_of_property(struct platfo + if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc")) + host->quirks |= SDHCI_QUIRK_BROKEN_DMA; + ++ if (of_device_is_compatible(np, "fsl,ls1088a-esdhc")) ++ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; ++ + if (of_device_is_compatible(np, "fsl,p2020-esdhc") || + of_device_is_compatible(np, "fsl,p1010-esdhc") || + of_device_is_compatible(np, "fsl,t4240-esdhc") || diff --git a/target/linux/layerscape/patches-4.4/8137-armv8-ls1088a-Add-PCIe-compatible.patch b/target/linux/layerscape/patches-4.4/8137-armv8-ls1088a-Add-PCIe-compatible.patch new file mode 100644 index 0000000000..d6137a8af6 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8137-armv8-ls1088a-Add-PCIe-compatible.patch @@ -0,0 +1,38 @@ +From 1aeb63c52ade1219032161fcdb923aa4c62b3796 Mon Sep 17 00:00:00 2001 +From: Prabhakar Kushwaha +Date: Sun, 9 Oct 2016 14:52:49 +0800 +Subject: [PATCH 137/141] armv8: ls1088a: Add PCIe compatible + +commit: 1a089a382b187c80390f022d1e3f3749b2adcc64 +[don't apply dtsi] + +Signed-off-by: Prabhakar Kushwaha +Integrated-by: Zhao Qiang +--- + drivers/pci/host/pci-layerscape.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/pci/host/pci-layerscape.c ++++ b/drivers/pci/host/pci-layerscape.c +@@ -215,6 +215,13 @@ static struct ls_pcie_drvdata ls1046_drv + .ops = &ls_pcie_host_ops, + }; + ++static struct ls_pcie_drvdata ls1088_drvdata = { ++ .lut_offset = 0x80000, ++ .ltssm_shift = 0, ++ .lut_dbg = 0x407fc, ++ .ops = &ls_pcie_host_ops, ++}; ++ + static struct ls_pcie_drvdata ls2080_drvdata = { + .lut_offset = 0x80000, + .ltssm_shift = 0, +@@ -227,6 +234,7 @@ static const struct of_device_id ls_pcie + { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata }, + { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata }, + { .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata }, ++ { .compatible = "fsl,ls1088a-pcie", .data = &ls1088_drvdata }, + { .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata }, + { .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata }, + { },