From: Kim Phillips Date: Tue, 30 Jan 2007 22:09:13 +0000 (-0600) Subject: [POWERPC] 83xx: Add the mpc8323emds.dts X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=18a1e4c3ee67680287bf3c455b5047421eda3c14;p=openwrt%2Fstaging%2Fblogic.git [POWERPC] 83xx: Add the mpc8323emds.dts Add the mpc8323emds device tree source (dts) Signed-off-by: Scott Wood Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc8323emds.dts new file mode 100644 index 000000000000..fa7ef24d205b --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8323emds.dts @@ -0,0 +1,345 @@ +/* + * MPC8323E EMDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8323EMDS"; + compatible = "MPC83xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8323@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; + }; + + bcsr@f8000000 { + device_type = "board-control"; + reg = ; + }; + + soc8323@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = ; + bus-frequency = <7DE2900>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = ; + interrupt-parent = <700>; + dfsrr; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = ; + interrupt-parent = <700>; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = ; + interrupt-parent = <700>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + pci@8500 { + linux,phandle = <8500>; + interrupt-map-mask = ; + interrupt-map = < + /* IDSEL 0x11 AD17 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 AD21*/ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 AD22*/ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 AD23*/ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 AD24*/ + c000 0 0 1 700 15 8 + c000 0 0 2 700 16 8 + c000 0 0 3 700 17 8 + c000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 d0000000 0 00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + + par_io@1400 { + reg = <1400 100>; + device_type = "par_io"; + num-ports = <7>; + + ucc_pin@03 { + linux,phandle = <140003>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 4 3 0 2 0 /* MDIO */ + 3 5 1 0 2 0 /* MDC */ + 0 d 2 0 1 0 /* RX_CLK (CLK9) */ + 3 18 2 0 1 0 /* TX_CLK (CLK10) */ + 1 1 1 0 1 0 /* TxD1 */ + 1 0 1 0 1 0 /* TxD0 */ + 1 1 1 0 1 0 /* TxD1 */ + 1 2 1 0 1 0 /* TxD2 */ + 1 3 1 0 1 0 /* TxD3 */ + 1 4 2 0 1 0 /* RxD0 */ + 1 5 2 0 1 0 /* RxD1 */ + 1 6 2 0 1 0 /* RxD2 */ + 1 7 2 0 1 0 /* RxD3 */ + 1 8 2 0 1 0 /* RX_ER */ + 1 9 1 0 1 0 /* TX_ER */ + 1 a 2 0 1 0 /* RX_DV */ + 1 b 2 0 1 0 /* COL */ + 1 c 1 0 1 0 /* TX_EN */ + 1 d 2 0 1 0>;/* CRS */ + }; + ucc_pin@04 { + linux,phandle = <140004>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 1f 2 0 1 0 /* RX_CLK (CLK7) */ + 3 6 2 0 1 0 /* TX_CLK (CLK8) */ + 1 12 1 0 1 0 /* TxD0 */ + 1 13 1 0 1 0 /* TxD1 */ + 1 14 1 0 1 0 /* TxD2 */ + 1 15 1 0 1 0 /* TxD3 */ + 1 16 2 0 1 0 /* RxD0 */ + 1 17 2 0 1 0 /* RxD1 */ + 1 18 2 0 1 0 /* RxD2 */ + 1 19 2 0 1 0 /* RxD3 */ + 1 1a 2 0 1 0 /* RX_ER */ + 1 1b 1 0 1 0 /* TX_ER */ + 1 1c 2 0 1 0 /* RX_DV */ + 1 1d 2 0 1 0 /* COL */ + 1 1e 1 0 1 0 /* TX_EN */ + 1 1f 2 0 1 0>;/* CRS */ + }; + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0100000 00100000>; + reg = ; + brg-frequency = <0>; + bus-frequency = ; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 00004000>; + + data-only@0 { + reg = <0 4000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = <80>; + mode = "cpu"; + }; + + usb@6c0 { + device_type = "usb"; + compatible = "qe_udc"; + reg = <6c0 40 8B00 100>; + interrupts = ; + interrupt-parent = <80>; + mode = "slave"; + }; + + ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <3>; + reg = <2200 200>; + interrupts = <22>; + interrupt-parent = <80>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = <19>; + tx-clock = <1a>; + phy-handle = <212003>; + pio-handle = <140003>; + }; + + ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <4>; + reg = <3000 200>; + interrupts = <23>; + interrupt-parent = <80>; + mac-address = [ 00 11 22 33 44 55 ]; + rx-clock = <17>; + tx-clock = <18>; + phy-handle = <212004>; + pio-handle = <140004>; + }; + + mdio@2320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2320 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + ethernet-phy@03 { + linux,phandle = <212003>; + interrupt-parent = <700>; + interrupts = <11 2>; + reg = <3>; + device_type = "ethernet-phy"; + interface = <3>; //ENET_100_MII + }; + ethernet-phy@04 { + linux,phandle = <212004>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <4>; + device_type = "ethernet-phy"; + interface = <3>; + }; + }; + + qeic@80 { + linux,phandle = <80>; + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <20 8 21 8>; //high:32 low:33 + interrupt-parent = <700>; + }; + }; +};