From: Bartosz Golaszewski Date: Wed, 21 Nov 2018 09:35:13 +0000 (+0100) Subject: ARM: davinci: dm365: define gpio interrupts as separate resources X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=193c04374e281a56c7d4f96e66d329671945bebe;p=openwrt%2Fstaging%2Fblogic.git ARM: davinci: dm365: define gpio interrupts as separate resources Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") the davinci GPIO driver fails to probe if we boot in legacy mode from any of the board files. Since the driver now expects every interrupt to be defined as a separate resource, split the definition of IRQ resources instead of having a single continuous interrupt range. Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index abcf2a5ed89b..42665914166a 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -267,6 +267,41 @@ static struct resource dm365_gpio_resources[] = { }, { /* interrupt */ .start = IRQ_DM365_GPIO0, + .end = IRQ_DM365_GPIO0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO1, + .end = IRQ_DM365_GPIO1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO2, + .end = IRQ_DM365_GPIO2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO3, + .end = IRQ_DM365_GPIO3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO4, + .end = IRQ_DM365_GPIO4, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO5, + .end = IRQ_DM365_GPIO5, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO6, + .end = IRQ_DM365_GPIO6, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM365_GPIO7, .end = IRQ_DM365_GPIO7, .flags = IORESOURCE_IRQ, },