From: Guido Günther Date: Sun, 17 Feb 2019 07:03:41 +0000 (-0800) Subject: Input: goodix - refer to touchscreen.txt in device tree bindings X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1a3d1306ff3ea414309b1c282eba4ae2431ff4a2;p=openwrt%2Fstaging%2Fblogic.git Input: goodix - refer to touchscreen.txt in device tree bindings Refer to touchscreen.txt for generic touch properties. This avoids duplication and we're using the generic code to parse these in the driver. While at that add touchscreen-size-{x,y} which are respected by the driver as well. Signed-off-by: Guido Günther Signed-off-by: Dmitry Torokhov --- diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index 57d3d8870a09..8cf0b4d38a7e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -19,11 +19,14 @@ Optional properties: - irq-gpios : GPIO pin used for IRQ. The driver uses the interrupt gpio pin as output to reset the device. - reset-gpios : GPIO pin used for reset - - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - (swapping is done after inverting the axis) + - touchscreen-inverted-x + - touchscreen-inverted-y + - touchscreen-size-x + - touchscreen-size-y + - touchscreen-swapped-x-y + +The touchscreen-* properties are documented in touchscreen.txt in this +directory. Example: