From: Russell King Date: Sun, 4 Sep 2016 20:45:56 +0000 (+0100) Subject: ARM: pxa/lubbock: add pcmcia clock X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1a57c286d8ced1e4144c6201a19bbb70827edee6;p=openwrt%2Fstaging%2Fblogic.git ARM: pxa/lubbock: add pcmcia clock Add the required PCMCIA clock for the SA1111 "1800" device. This clock is used to compute timing information for the PCMCIA interface in the SoC device, rather than the SA1111. Hence, the provision of this clock is a convenience for the driver and does not reflect the hardware, so this must not be copied into DT. Acked-by: Robert Jarzmik Tested-by: Robert Jarzmik Signed-off-by: Russell King --- diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 7245f3359564..d6159f8ef0c2 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -137,6 +137,18 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { // no D+ pullup; lubbock can't connect/disconnect in software }; +static void lubbock_init_pcmcia(void) +{ + struct clk *clk; + + /* Add an alias for the SA1111 PCMCIA clock */ + clk = clk_get_sys("pxa2xx-pcmcia", NULL); + if (!IS_ERR(clk)) { + clkdev_create(clk, NULL, "1800"); + clk_put(clk); + } +} + static struct resource sa1111_resources[] = { [0] = { .start = 0x10000000, @@ -467,6 +479,8 @@ static void __init lubbock_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + lubbock_init_pcmcia(); + clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); pxa_set_udc_info(&udc_info); pxa_set_fb_info(NULL, &sharp_lm8v31);