From: Will Deacon <will.deacon@arm.com>
Date: Wed, 5 Jun 2013 10:25:13 +0000 (+0100)
Subject: ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1aa2b3b7a6c4f3dbd3671171113a20e6a6190e3b;p=openwrt%2Fstaging%2Fblogic.git

ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace

Running an OABI_COMPAT kernel on an SMP platform can lead to fun and
games with page aging.

If one CPU issues a swi instruction immediately before another CPU
decides to mkold the page containing the swi instruction, then we will
fault attempting to load the instruction during the vector_swi handler
in order to retrieve its immediate field. Since this fault is not
currently dealt with by our exception tables, this results in a panic:

  Unable to handle kernel paging request at virtual address 4020841c
  pgd = c490c000
  [4020841c] *pgd=84451831, *pte=bf05859d, *ppte=00000000
  Internal error: Oops: 17 [#1] PREEMPT SMP ARM
  Modules linked in: hid_sony(O)
  CPU: 1    Tainted: G        W  O  (3.4.0-perf-gf496dca-01162-gcbcc62b #1)
  PC is at vector_swi+0x28/0x88
  LR is at 0x40208420

This patch wraps all of the swi instruction loads with the USER macro
and provides a shared exception table entry which simply rewinds the
saved user PC and returns from the system call (without setting tbl, so
there's no worries with tracing or syscall restarting). Returning to
userspace will re-enter the page fault handler, from where we will
probably send SIGSEGV to the current task.

Reported-by: Wang, Yalin <yalin.wang@sonymobile.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---

diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index bc5bc0a97131..4bc816a74a2e 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -362,6 +362,16 @@ ENTRY(vector_swi)
 	str	r0, [sp, #S_OLD_R0]		@ Save OLD_R0
 	zero_fp
 
+#ifdef CONFIG_ALIGNMENT_TRAP
+	ldr	ip, __cr_alignment
+	ldr	ip, [ip]
+	mcr	p15, 0, ip, c1, c0		@ update control register
+#endif
+
+	enable_irq
+	ct_user_exit
+	get_thread_info tsk
+
 	/*
 	 * Get the system call number.
 	 */
@@ -375,9 +385,9 @@ ENTRY(vector_swi)
 #ifdef CONFIG_ARM_THUMB
 	tst	r8, #PSR_T_BIT
 	movne	r10, #0				@ no thumb OABI emulation
-	ldreq	r10, [lr, #-4]			@ get SWI instruction
+ USER(	ldreq	r10, [lr, #-4]		)	@ get SWI instruction
 #else
-	ldr	r10, [lr, #-4]			@ get SWI instruction
+ USER(	ldr	r10, [lr, #-4]		)	@ get SWI instruction
 #endif
 #ifdef CONFIG_CPU_ENDIAN_BE8
 	rev	r10, r10			@ little endian instruction
@@ -392,22 +402,13 @@ ENTRY(vector_swi)
 	/* Legacy ABI only, possibly thumb mode. */
 	tst	r8, #PSR_T_BIT			@ this is SPSR from save_user_regs
 	addne	scno, r7, #__NR_SYSCALL_BASE	@ put OS number in
-	ldreq	scno, [lr, #-4]
+ USER(	ldreq	scno, [lr, #-4]		)
 
 #else
 	/* Legacy ABI only. */
-	ldr	scno, [lr, #-4]			@ get SWI instruction
+ USER(	ldr	scno, [lr, #-4]		)	@ get SWI instruction
 #endif
 
-#ifdef CONFIG_ALIGNMENT_TRAP
-	ldr	ip, __cr_alignment
-	ldr	ip, [ip]
-	mcr	p15, 0, ip, c1, c0		@ update control register
-#endif
-	enable_irq
-	ct_user_exit
-
-	get_thread_info tsk
 	adr	tbl, sys_call_table		@ load syscall table pointer
 
 #if defined(CONFIG_OABI_COMPAT)
@@ -442,6 +443,21 @@ local_restart:
 	eor	r0, scno, #__NR_SYSCALL_BASE	@ put OS number back
 	bcs	arm_syscall	
 	b	sys_ni_syscall			@ not private func
+
+#if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)
+	/*
+	 * We failed to handle a fault trying to access the page
+	 * containing the swi instruction, but we're not really in a
+	 * position to return -EFAULT. Instead, return back to the
+	 * instruction and re-enter the user fault handling path trying
+	 * to page it in. This will likely result in sending SEGV to the
+	 * current task.
+	 */
+9001:
+	sub	lr, lr, #4
+	str	lr, [sp, #S_PC]
+	b	ret_fast_syscall
+#endif
 ENDPROC(vector_swi)
 
 	/*