From: Adrian Schmutzler Date: Thu, 30 Jan 2020 17:55:21 +0000 (+0100) Subject: mediatek: mt7623: remove left-over fragments of mt7623a-rfb-emmc X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1ab81bf02d750c9a2a447dbf4fdb323921f291d7;p=openwrt%2Fstaging%2Fblocktrron.git mediatek: mt7623: remove left-over fragments of mt7623a-rfb-emmc The image creation for the mt7623a-rfb-emmc has been removed during a patch refresh without specific comment. The corresponding base-files entries and DTS patches for 4.14 are still there. Since mt7623 is pretty dead and nobody has missed this device, let's just remove the rest. Fixes: 050da2107a7e ("mediatek: backport upstream mediatek patches") Signed-off-by: Adrian Schmutzler Acked-by: John Crispin --- diff --git a/target/linux/mediatek/mt7623/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7623/base-files/etc/board.d/02_network index 07fd63fba7..391b1ddc07 100755 --- a/target/linux/mediatek/mt7623/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/mt7623/base-files/etc/board.d/02_network @@ -9,10 +9,6 @@ mediatek_setup_interfaces() local board="$1" case $board in - mediatek,mt7623a-rfb-emmc) - ucidef_set_interface_lan "lan0 lan1 lan2 lan3" - ucidef_set_interface_wan eth1 - ;; bananapi,bpi-r2|\ unielec,u7623-02-emmc-512m) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" diff --git a/target/linux/mediatek/patches-4.14/0064-dts.patch b/target/linux/mediatek/patches-4.14/0064-dts.patch index a2f5000d4d..ec9adfbb48 100644 --- a/target/linux/mediatek/patches-4.14/0064-dts.patch +++ b/target/linux/mediatek/patches-4.14/0064-dts.patch @@ -115,468 +115,6 @@ &i2c0 { pinctrl-names = "default"; ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -1061,6 +1061,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ - mt6580-evbp1.dtb \ - mt6589-aquaris5.dtb \ - mt6592-evb.dtb \ -+ mt7623a-rfb-emmc.dtb \ - mt7623n-rfb-nand.dtb \ - mt7623n-bananapi-bpi-r2.dtb \ - mt8127-moose.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts -@@ -0,0 +1,449 @@ -+/* -+ * Copyright 2017 Sean Wang -+ * -+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+ */ -+ -+/dts-v1/; -+#include -+#include "mt7623.dtsi" -+#include "mt6323.dtsi" -+ -+/ { -+ model = "MediaTek MT7623N NAND reference board"; -+ compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623"; -+ -+ aliases { -+ serial2 = &uart2; -+ }; -+ -+ chosen { -+ bootargs = "earlyprintk block2mtd.block2mtd=/dev/mmcblk0,65536,eMMC,5 mtdparts=eMMC:256k(mbr)ro,512k(uboot)ro,256k(config)ro,256k(factory)ro,32M(kernel),32M(recovery),1024M(rootfs),2048M(usrdata),-(bmtpool) rootfstype=squashfs,jffs2"; -+ -+ stdout-path = "serial2:115200n8"; -+ }; -+ -+ memory { -+ reg = <0 0x80000000 0 0x20000000>; -+ }; -+ -+ cpus { -+ cpu@0 { -+ proc-supply = <&mt6323_vproc_reg>; -+ }; -+ -+ cpu@1 { -+ proc-supply = <&mt6323_vproc_reg>; -+ }; -+ -+ cpu@2 { -+ proc-supply = <&mt6323_vproc_reg>; -+ }; -+ -+ cpu@3 { -+ proc-supply = <&mt6323_vproc_reg>; -+ }; -+ }; -+ -+ memory@80000000 { -+ reg = <0 0x80000000 0 0x40000000>; -+ }; -+ -+ mt7530: switch@0 { -+ compatible = "mediatek,mt7530"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+}; -+ -+&crypto { -+ status = "okay"; -+}; -+ -+ð { -+ status = "okay"; -+ -+ gmac0: mac@0 { -+ compatible = "mediatek,eth-mac"; -+ reg = <0>; -+ phy-mode = "trgmii"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ pause; -+ }; -+ }; -+ -+ gmac1: mac@1 { -+ compatible = "mediatek,eth-mac"; -+ reg = <1>; -+ phy-mode = "rgmiii-rxid"; -+ phy-handle = <&phy5>; -+ }; -+ -+ mdio: mdio-bus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ phy5: ethernet-phy@5 { -+ reg = <5>; -+ phy-mode = "rgmii-rxid"; -+ }; -+ }; -+}; -+ -+&mt7530 { -+ compatible = "mediatek,mt7530"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ pinctrl-names = "default"; -+ mediatek,mcm; -+ resets = <ðsys 2>; -+ reset-names = "mcm"; -+ core-supply = <&mt6323_vpa_reg>; -+ io-supply = <&mt6323_vemc3v3_reg>; -+ -+ dsa,mii-bus = <&mdio>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan0"; -+ cpu = <&cpu_port0>; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan1"; -+ cpu = <&cpu_port0>; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan2"; -+ cpu = <&cpu_port0>; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan3"; -+ cpu = <&cpu_port0>; -+ }; -+ -+ cpu_port0: port@6 { -+ reg = <6>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ phy-mode = "trgmii"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ }; -+}; -+ -+&i2c0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins_a>; -+ status = "okay"; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default", "state_uhs"; -+ pinctrl-0 = <&mmc0_pins_default>; -+ pinctrl-1 = <&mmc0_pins_uhs>; -+ status = "okay"; -+ bus-width = <8>; -+ max-frequency = <50000000>; -+ cap-mmc-highspeed; -+ vmmc-supply = <&mt6323_vemc3v3_reg>; -+ vqmmc-supply = <&mt6323_vio18_reg>; -+ non-removable; -+}; -+ -+&mmc1 { -+ pinctrl-names = "default", "state_uhs"; -+ pinctrl-0 = <&mmc1_pins_default>; -+ pinctrl-1 = <&mmc1_pins_uhs>; -+ status = "okay"; -+ bus-width = <4>; -+ max-frequency = <50000000>; -+ cap-sd-highspeed; -+ cd-gpios = <&pio 261 0>; -+ vmmc-supply = <&mt6323_vmch_reg>; -+ vqmmc-supply = <&mt6323_vio18_reg>; -+}; -+ -+&pio { -+ cir_pins_a:cir@0 { -+ pins_cir { -+ pinmux = ; -+ bias-disable; -+ }; -+ }; -+ -+ i2c0_pins_a: i2c@0 { -+ pins_i2c0 { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ }; -+ -+ i2c1_pins_a: i2c@1 { -+ pin_i2c1 { -+ pinmux = , -+ ; -+ bias-disable; -+ }; -+ }; -+ -+ i2s0_pins_a: i2s@0 { -+ pin_i2s0 { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ drive-strength = ; -+ bias-pull-down; -+ }; -+ }; -+ -+ i2s1_pins_a: i2s@1 { -+ pin_i2s1 { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ drive-strength = ; -+ bias-pull-down; -+ }; -+ }; -+ -+ mmc0_pins_default: mmc0default { -+ pins_cmd_dat { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ input-enable; -+ bias-pull-up; -+ }; -+ -+ pins_clk { -+ pinmux = ; -+ bias-pull-down; -+ }; -+ -+ pins_rst { -+ pinmux = ; -+ bias-pull-up; -+ }; -+ }; -+ -+ mmc0_pins_uhs: mmc0 { -+ pins_cmd_dat { -+ pinmux = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ input-enable; -+ drive-strength = ; -+ bias-pull-up = ; -+ }; -+ -+ pins_clk { -+ pinmux = ; -+ drive-strength = ; -+ bias-pull-down = ; -+ }; -+ -+ pins_rst { -+ pinmux = ; -+ bias-pull-up; -+ }; -+ }; -+ -+ mmc1_pins_default: mmc1default { -+ pins_cmd_dat { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ input-enable; -+ drive-strength = ; -+ bias-pull-up = ; -+ }; -+ -+ pins_clk { -+ pinmux = ; -+ bias-pull-down; -+ drive-strength = ; -+ }; -+ -+ pins_wp { -+ pinmux = ; -+ input-enable; -+ bias-pull-up; -+ }; -+ -+ pins_insert { -+ pinmux = ; -+ bias-pull-up; -+ }; -+ }; -+ -+ mmc1_pins_uhs: mmc1 { -+ pins_cmd_dat { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ input-enable; -+ drive-strength = ; -+ bias-pull-up = ; -+ }; -+ -+ pins_clk { -+ pinmux = ; -+ drive-strength = ; -+ bias-pull-down = ; -+ }; -+ }; -+ -+ pwm_pins_a: pwm@0 { -+ pins_pwm { -+ pinmux = , -+ , -+ , -+ , -+ ; -+ }; -+ }; -+ -+ spi0_pins_a: spi@0 { -+ pins_spi { -+ pinmux = , -+ , -+ , -+ ; -+ bias-disable; -+ }; -+ }; -+ -+ uart0_pins_a: uart@0 { -+ pins_dat { -+ pinmux = , -+ ; -+ }; -+ }; -+ -+ uart1_pins_a: uart@1 { -+ pins_dat { -+ pinmux = , -+ ; -+ }; -+ }; -+}; -+ -+&pwm { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pwm_pins_a>; -+ status = "okay"; -+}; -+ -+&pwrap { -+ mt6323 { -+ mt6323led: led { -+ compatible = "mediatek,mt6323-led"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ led@0 { -+ reg = <0>; -+ label = "bpi-r2:isink:green"; -+ default-state = "off"; -+ }; -+ -+ led@1 { -+ reg = <1>; -+ label = "bpi-r2:isink:red"; -+ default-state = "off"; -+ }; -+ -+ led@2 { -+ reg = <2>; -+ label = "bpi-r2:isink:blue"; -+ default-state = "off"; -+ }; -+ }; -+ }; -+}; -+ -+&spi0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins_a>; -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "disabled"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins_a>; -+ status = "disabled"; -+}; -+ -+&uart2 { -+ status = "okay"; -+}; -+ -+&usb1 { -+ vusb33-supply = <&mt6323_vusb_reg>; -+ status = "okay"; -+}; -+ -+&usb2 { -+ vusb33-supply = <&mt6323_vusb_reg>; -+ status = "okay"; -+}; -+ -+&u3phy1 { -+ status = "okay"; -+}; -+ -+&u3phy2 { -+ status = "okay"; -+}; -+ --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -326,6 +326,7 @@ diff --git a/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch b/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch index 46fc9abab9..cc3758119a 100644 --- a/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch +++ b/target/linux/mediatek/patches-4.14/0227-arm-dts-Add-Unielec-U7623-DTS.patch @@ -13,10 +13,10 @@ Subject: [PATCH] arm: dts: Add Unielec U7623 DTS --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -1062,6 +1062,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ +@@ -1061,6 +1061,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ + mt6580-evbp1.dtb \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ - mt7623a-rfb-emmc.dtb \ + mt7623a-unielec-u7623-02-emmc-512m.dtb \ mt7623n-rfb-nand.dtb \ mt7623n-bananapi-bpi-r2.dtb \