From: Henryk Heisig Date: Mon, 7 Nov 2016 14:37:25 +0000 (+0100) Subject: ar71xx: wpa8630: change board name to tl-wpa8630 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1b2b3cb8becef2bf6ddf3f3f3747f99fa17e334d;p=openwrt%2Fstaging%2Fblogic.git ar71xx: wpa8630: change board name to tl-wpa8630 Signed-off-by: Henryk Heisig --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 01308b5f57c8..cde3a947e9ed 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -521,6 +521,11 @@ archer-c7) ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy0tpt" ;; +tl-wpa8630) + ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" + ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1" + ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0" + ;; tl-wr802n-v1) ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt" ;; @@ -638,11 +643,6 @@ wnr612-v2) ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f" ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f" ;; -wpa8630) - ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0" - ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1" - ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" - ;; wpn824n) ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0" ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index e6489af8766f..24dfced4ae2c 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -366,6 +366,10 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" ;; + tl-wpa8630) + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" + ;; tl-wr1043nd) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" @@ -398,10 +402,6 @@ ar71xx_setup_interfaces() ucidef_add_switch_port_attr "switch0" 2 led 9 ucidef_add_switch_port_attr "switch0" 5 led 2 ;; - wpa8630) - ucidef_add_switch "switch0" \ - "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4" - ;; wpj344) ucidef_add_switch "switch0" \ "0@eth0" "3:lan" "2:wan" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 8b038e47eefc..881b3c65e5bb 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -44,7 +44,7 @@ get_status_led() { mr12|\ mr16|\ nbg6616|\ - wpa8630) + tl-wpa8630) status_led="$board:green:power" ;; ap96) diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index c95cfb9ec4d0..872e6a842752 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -86,14 +86,14 @@ case "$FIRMWARE" in ath10kcal_extract "ART" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; + tl-wpa8630) + ath10kcal_extract "ART" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) + ;; unifiac-lite | \ unifiac-pro) ath10kcal_extract "EEPROM" 20480 2116 ;; - wpa8630) - ath10kcal_extract "ART" 20480 2116 - ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) - ;; esac ;; "ath10k/cal-pci-0000:01:00.0.bin") diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index d7c4131f7bb1..75542470babc 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -985,6 +985,9 @@ ar71xx_board_detect() { *"TL-WDR6500 v2") name="tl-wdr6500-v2" ;; + *TL-WPA8630) + name="tl-wpa8630" + ;; *TL-WR741ND) name="tl-wr741nd" ;; @@ -1129,9 +1132,6 @@ ar71xx_board_detect() { *"WNR1000 V2") name="wnr1000-v2" ;; - *WPA8630) - name="wpa8630" - ;; *WPN824N) name="wpn824n" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 3c7976d6bf38..c4a9f8a9f114 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -366,6 +366,7 @@ platform_check_image() { tl-wdr4300|\ tl-wdr4900-v2|\ tl-wdr6500-v2|\ + tl-wpa8630|\ tl-wr1041n-v2|\ tl-wr1043nd-v2|\ tl-wr1043nd|\ @@ -386,8 +387,7 @@ platform_check_image() { tl-wr842n-v3|\ tl-wr941nd-v5|\ tl-wr941nd-v6|\ - tl-wr941nd|\ - wpa8630) + tl-wr941nd) local magic_ver="0100" case "$board" in diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 64c3604371f1..4fe80f015c16 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -163,6 +163,7 @@ CONFIG_ATH79_MACH_TL_WDR3320_V2=y CONFIG_ATH79_MACH_TL_WDR3500=y CONFIG_ATH79_MACH_TL_WDR4300=y CONFIG_ATH79_MACH_TL_WDR6500_V2=y +CONFIG_ATH79_MACH_TL_WPA8630=y CONFIG_ATH79_MACH_TL_WR1041N_V2=y CONFIG_ATH79_MACH_TL_WR1043ND=y CONFIG_ATH79_MACH_TL_WR1043ND_V2=y @@ -194,7 +195,6 @@ CONFIG_ATH79_MACH_WNR2000_V3=y CONFIG_ATH79_MACH_WNR2000_V4=y CONFIG_ATH79_MACH_WNR2200=y CONFIG_ATH79_MACH_WP543=y -CONFIG_ATH79_MACH_WPA8630=y CONFIG_ATH79_MACH_WPE72=y CONFIG_ATH79_MACH_WPJ342=y CONFIG_ATH79_MACH_WPJ344=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 60f6d9a97838..db3b9bd07675 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1708,8 +1708,8 @@ config ATH79_MACH_DAP_2695_A1 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC -config ATH79_MACH_WPA8630 - bool "TP-Link WPA8630 support" +config ATH79_MACH_TL_WPA8630 + bool "TP-Link TL-WPA8630 support" select SOC_QCA956X select ATH79_DEV_AP9X_PCI if PCI select ATH79_DEV_ETH diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index cbfd7a450664..580d2e249f90 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -169,6 +169,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2) += mach-tl-wdr3320-v2.o obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o +obj-$(CONFIG_ATH79_MACH_TL_WPA8630) += mach-tl-wpa8630.o obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o @@ -200,7 +201,6 @@ obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o -obj-$(CONFIG_ATH79_MACH_WPA8630) += mach-wpa8630.o obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c new file mode 100644 index 000000000000..acdd7c3bb9dd --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c @@ -0,0 +1,166 @@ +/* + * TP-Link TL-WPA8630 board support + * + * Copyright (C) 2016 Henryk Heisig + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#include +#include +#include +#include + +#include "common.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-spi.h" +#include "dev-wmac.h" + +#define TL_WPA8630_KEYS_POLL_INTERVAL 20 +#define TL_WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * TL_WPA8630_KEYS_POLL_INTERVAL) + +#define TL_WPA8630_GPIO_LED_POWER 1 +#define TL_WPA8630_GPIO_LED_LAN 5 +#define TL_WPA8630_GPIO_LED_WLAN 19 +#define TL_WPA8630_GPIO_LED_WLAN5 21 + +#define TL_WPA8630_GPIO_BTN_RESET 2 +#define TL_WPA8630_GPIO_BTN_RFKILL 8 +#define TL_WPA8630_GPIO_BTN_LED 6 +#define TL_WPA8630_GPIO_BTN_PAIR 7 + +#define TL_WPA8630_MAC0_OFFSET 0x0000 +#define TL_WPA8630_WMAC_CALDATA_OFFSET 0x1000 +#define TL_WPA8630_PCI_CALDATA_OFFSET 0x5000 + +static struct flash_platform_data tl_wpa8630_flash_data = { + .type = "s25fl064k", +}; + +static struct gpio_led tl_wpa8630_leds_gpio[] __initdata = { + { + .name = "tl-wpa8630:green:power", + .gpio = TL_WPA8630_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "tl-wpa8630:green:lan", + .gpio = TL_WPA8630_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "tl-wpa8630:green:wlan", + .gpio = TL_WPA8630_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "tl-wpa8630:green:wlan5", + .gpio = TL_WPA8630_GPIO_LED_WLAN5, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_wpa8630_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WPA8630_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "RFKILL button", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WPA8630_GPIO_BTN_RFKILL, + .active_low = 1, + }, + { + .desc = "LED", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WPA8630_GPIO_BTN_LED, + .active_low = 1, + }, + { + .desc = "Pair", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WPA8630_GPIO_BTN_PAIR, + .active_low = 1, + }, +}; + +/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */ +static struct ar8327_pad_cfg tl_wpa8630_qca8337_pad0_cfg = { + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, +}; + +static struct ar8327_platform_data tl_wpa8630_qca8337_data = { + .pad0_cfg = &tl_wpa8630_qca8337_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info tl_wpa8630_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &tl_wpa8630_qca8337_data, + }, +}; + +static void __init tl_wpa8630_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(&tl_wpa8630_flash_data); + + ath79_init_mac(ath79_eth0_data.mac_addr, + art + TL_WPA8630_MAC0_OFFSET, 0); + + platform_device_register(&ath79_mdio0_device); + + mdiobus_register_board_info(tl_wpa8630_mdio0_info, + ARRAY_SIZE(tl_wpa8630_mdio0_info)); + + /* GMAC0 is connected to an AR8337 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_data.phy_mask = ~BIT(4); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + + ath79_register_eth(0); + + ath79_register_wmac(art + TL_WPA8630_WMAC_CALDATA_OFFSET, mac); + + ap91_pci_init(art + TL_WPA8630_PCI_CALDATA_OFFSET, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wpa8630_leds_gpio), + tl_wpa8630_leds_gpio); + + ath79_register_gpio_keys_polled(-1, TL_WPA8630_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wpa8630_gpio_keys), + tl_wpa8630_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_TL_WPA8630, "TL-WPA8630", "TP-Link TL-WPA8630", + tl_wpa8630_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c deleted file mode 100644 index d86adaf27b0e..000000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpa8630.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * TP-Link WPA8630 board support - * - * Copyright (C) 2016 Henryk Heisig - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#include -#include -#include -#include - -#include "common.h" -#include "dev-m25p80.h" -#include "machtypes.h" -#include "pci.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-wmac.h" - -#define WPA8630_KEYS_POLL_INTERVAL 20 -#define WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * WPA8630_KEYS_POLL_INTERVAL) - -#define WPA8630_GPIO_LED_POWER 1 -#define WPA8630_GPIO_LED_LAN 5 -#define WPA8630_GPIO_LED_WLAN 19 -#define WPA8630_GPIO_LED_WLAN5 21 - -#define WPA8630_GPIO_BTN_RESET 2 -#define WPA8630_GPIO_BTN_RFKILL 8 -#define WPA8630_GPIO_BTN_0 6 -#define WPA8630_GPIO_BTN_1 7 - -#define WPA8630_MAC0_OFFSET 0x0000 -#define WPA8630_WMAC_CALDATA_OFFSET 0x1000 -#define WPA8630_PCI_CALDATA_OFFSET 0x5000 - -static struct flash_platform_data wpa8630_flash_data = { - .type = "s25fl064k", -}; - -static struct gpio_led wpa8630_leds_gpio[] __initdata = { - { - .name = "wpa8630:green:power", - .gpio = WPA8630_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "wpa8630:green:lan", - .gpio = WPA8630_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "wpa8630:green:wlan", - .gpio = WPA8630_GPIO_LED_WLAN, - .active_low = 1, - }, - { - .name = "wpa8630:green:wlan5", - .gpio = WPA8630_GPIO_LED_WLAN5, - .active_low = 1, - }, -}; - -static struct gpio_keys_button wpa8630_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPA8630_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPA8630_GPIO_BTN_RFKILL, - .active_low = 1, - }, - { - .desc = "LED", - .type = EV_KEY, - .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPA8630_GPIO_BTN_0, - .active_low = 1, - }, - { - .desc = "Pair", - .type = EV_KEY, - .debounce_interval = WPA8630_KEYS_DEBOUNCE_INTERVAL, - .gpio = WPA8630_GPIO_BTN_1, - .active_low = 1, - }, -}; - -/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */ -static struct ar8327_pad_cfg wpa8630_qca8337_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -static struct ar8327_platform_data wpa8630_qca8337_data = { - .pad0_cfg = &wpa8630_qca8337_pad0_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, -}; - -static struct mdio_board_info wpa8630_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .phy_addr = 0, - .platform_data = &wpa8630_qca8337_data, - }, -}; - -static void __init wpa8630_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_m25p80(&wpa8630_flash_data); - - ath79_init_mac(ath79_eth0_data.mac_addr, - art + WPA8630_MAC0_OFFSET, 0); - - platform_device_register(&ath79_mdio0_device); - - mdiobus_register_board_info(wpa8630_mdio0_info, - ARRAY_SIZE(wpa8630_mdio0_info)); - - /* GMAC0 is connected to an AR8337 switch */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_data.phy_mask = ~BIT(4); - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - - ath79_register_eth(0); - - ath79_register_wmac(art + WPA8630_WMAC_CALDATA_OFFSET, mac); - - ap91_pci_init(art + WPA8630_PCI_CALDATA_OFFSET, NULL); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(wpa8630_leds_gpio), - wpa8630_leds_gpio); - - ath79_register_gpio_keys_polled(-1, WPA8630_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wpa8630_gpio_keys), - wpa8630_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_WPA8630, "WPA8630", "TP-Link WPA8630", - wpa8630_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index d252a2bc443c..3ebcbc0de503 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -198,6 +198,7 @@ enum ath79_mach_type { ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */ ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */ ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */ + ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */ @@ -258,7 +259,6 @@ enum ath79_mach_type { ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */ ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */ ATH79_MACH_WP543, /* Compex WP543 */ - ATH79_MACH_WPA8630, /* TP-Link WPA8630 */ ATH79_MACH_WPE72, /* Compex WPE72 */ ATH79_MACH_WPJ342, /* Compex WPJ342 */ ATH79_MACH_WPJ344, /* Compex WPJ344 */ diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk index b494411db755..8370a1960e07 100644 --- a/target/linux/ar71xx/image/tp-link.mk +++ b/target/linux/ar71xx/image/tp-link.mk @@ -371,6 +371,18 @@ define Device/tl-mr3420-v2 endef TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2 +define Device/tl-wpa8630 + $(Device/tplink-8mlzma) + DEVICE_TITLE := TP-LINK TL-WPA8630 + DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x + BOARDNAME := TL-WPA8630 + DEVICE_PROFILE := TL-WPA8630 + TPLINK_HWID := 0x86300001 + MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware) + IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000 +endef +TARGET_DEVICES += tl-wpa8630 + define Device/tl-wr703n-v1 $(Device/tplink-4mlzma) DEVICE_TITLE := TP-LINK TL-WR703N @@ -913,15 +925,3 @@ define Device/tl-wa7210n-v2 CONSOLE := ttyATH0,115200 endef TARGET_DEVICES += tl-wa7210n-v2 - -define Device/wpa8630 - $(Device/tplink-8mlzma) - DEVICE_TITLE := TP-LINK WPA8630 - DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x - BOARDNAME := WPA8630 - DEVICE_PROFILE := WPA8630 - TPLINK_HWID := 0x86300001 - MTDPARTS = spi0.0:64k(u-boot)ro,1280k(kernel),6720k(rootfs),64k(mib0)ro,64k(ART)ro,8000k@0x10000(firmware) - IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -a 0x10000 -endef -TARGET_DEVICES += wpa8630