From: John Keeping Date: Fri, 24 Feb 2017 12:54:56 +0000 (+0000) Subject: drm/rockchip: dw-mipi-dsi: fix escape clock rate X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1bef24bae2ed4d9eabc5cde33e293b2fe95796ef;p=openwrt%2Fstaging%2Fblogic.git drm/rockchip: dw-mipi-dsi: fix escape clock rate This clock rate is derived from the PHY PLL, so it should be calculated dynamically. This calculation is the same as that used by the vendor kernel and ensures that the escape clock runs at <20MHz as required by the MIPI specification. Signed-off-by: John Keeping Reviewed-by: Chris Zhong Reviewed-by: Sean Paul Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/20170224125506.21533-14-john@metanate.com --- diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index 4201a2143295..0f9be41f0361 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -712,11 +712,21 @@ static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi) static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi) { + /* + * The maximum permitted escape clock is 20MHz and it is derived from + * lanebyteclk, which is running at "lane_mbps / 8". Thus we want: + * + * (lane_mbps >> 3) / esc_clk_division < 20 + * which is: + * (lane_mbps >> 3) / 20 > esc_clk_division + */ + u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1; + dsi_write(dsi, DSI_PWR_UP, RESET); dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK | PHY_RSTZ | PHY_SHUTDOWNZ); dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) | - TX_ESC_CLK_DIVIDSION(7)); + TX_ESC_CLK_DIVIDSION(esc_clk_division)); } static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,