From: Huazhong Tan Date: Tue, 30 Oct 2018 13:50:49 +0000 (+0800) Subject: net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1c12493809924deda6c0834cb2f2c5a6dc786390;p=openwrt%2Fstaging%2Fblogic.git net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read When there is a PHY, the driver needs to complete some operations through MDIO during reset reinitialization, so HCLGE_STATE_CMD_DISABLE is more suitable than HCLGE_STATE_RST_HANDLING to prevent the MDIO operation from being sent during the hardware reset. Fixes: b50ae26c57cb ("net: hns3: never send command queue message to IMP when reset) Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c index 24b1f2a0c32a..03018638f701 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c @@ -52,7 +52,7 @@ static int hclge_mdio_write(struct mii_bus *bus, int phyid, int regnum, struct hclge_desc desc; int ret; - if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state)) + if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) return 0; hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, false); @@ -90,7 +90,7 @@ static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum) struct hclge_desc desc; int ret; - if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state)) + if (test_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state)) return 0; hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, true);