From: Birger Koblitz <git@birger-koblitz.de>
Date: Thu, 13 Jan 2022 06:23:13 +0000 (+0100)
Subject: realtek: Update RTL838X DTS to new Realtek IRQ controller notation
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1df2f8d83107486d0a759dce734a59852705078c;p=openwrt%2Fstaging%2Fdangole.git

realtek: Update RTL838X DTS to new Realtek IRQ controller notation

Replace the interrupt controller node with the new realtek,rtl-intc
node and change all device interrupts to use the 2 field notation:
interrupts = <[SoC IRQ] [Index to MIPS IRQ]>

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
---

diff --git a/target/linux/realtek/dts-5.10/rtl838x.dtsi b/target/linux/realtek/dts-5.10/rtl838x.dtsi
index 899c1731fb..bfe75b8eb2 100644
--- a/target/linux/realtek/dts-5.10/rtl838x.dtsi
+++ b/target/linux/realtek/dts-5.10/rtl838x.dtsi
@@ -87,27 +87,14 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x18000000 0x10000>;
 
-		intc: rtlintc@3000 {
-			compatible = "realtek,rtl-intc";
-			reg = <0x3000 0x20>;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
+		intc: interrupt-controller@3000 {
+			compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
+			reg = <0x3000 0x18>;
 			interrupt-controller;
-			interrupt-map =
-				<31 &cpuintc 2>, /* UART0 */
-				<30 &cpuintc 1>, /* UART1 */
-				<29 &cpuintc 5>, /* TC0 */
-				<28 &cpuintc 1>, /* TC1 */
-				<27 &cpuintc 1>, /* OCPTO */
-				<26 &cpuintc 1>, /* HLXTO */
-				<25 &cpuintc 1>, /* SLXTO */
-				<24 &cpuintc 4>, /* NIC */
-				<23 &cpuintc 4>, /* GPIO_ABCD */
-				<22 &cpuintc 4>, /* GPIO_EFGH */
-				<21 &cpuintc 4>, /* RTC */
-				<20 &cpuintc 3>, /* SWCORE */
-				<19 &cpuintc 4>, /* WDT_IP1 */
-				<18 &cpuintc 5>; /* WDT_IP2 */
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>, <4>, <5>, <6>;
 		};
 
 		spi0: spi@1200 {
@@ -125,7 +112,7 @@
 			clocks = <&lx_clk>;
 
 			interrupt-parent = <&intc>;
-			interrupts = <31>;
+			interrupts = <31 1>;
 
 			reg-io-width = <1>;
 			reg-shift = <2>;
@@ -143,7 +130,7 @@
 			clocks = <&lx_clk>;
 
 			interrupt-parent = <&intc>;
-			interrupts = <30>;
+			interrupts = <30 0>;
 
 			reg-io-width = <1>;
 			reg-shift = <2>;
@@ -164,7 +151,7 @@
 
 			interrupt-parent = <&intc>;
 			interrupt-names = "phase1", "phase2";
-			interrupts = <19>, <18>;
+			interrupts = <19 3>, <18 4>;
 		};
 
 		gpio0: gpio-controller@3500 {
@@ -178,7 +165,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
-			interrupts = <23>;
+			interrupts = <23 3>;
 		};
 	};
 
@@ -225,7 +212,7 @@
 		compatible = "realtek,rtl838x-eth";
 		reg = <0x1b00a300 0x100>;
 		interrupt-parent = <&intc>;
-		interrupts = <24>;
+		interrupts = <24 3>;
 		#interrupt-cells = <1>;
 		phy-mode = "internal";
 
@@ -239,6 +226,6 @@
 		compatible = "realtek,rtl83xx-switch";
 
 		interrupt-parent = <&intc>;
-		interrupts = <20>;
+		interrupts = <20 2>;
 	};
 };