From: Karl-Felix Glatzer Date: Wed, 12 Dec 2018 16:56:15 +0000 (+0100) Subject: ath79: add support for TP-Link Archer A7 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1e4ee63cc8d1889a78b539a5ed7be8d56e9b976f;p=openwrt%2Fstaging%2Fneocturne.git ath79: add support for TP-Link Archer A7 This patch adds support for TP-Link Archer A7 Specification: - SOC: QCA9563 - Flash: 16 MiB (SPI) - RAM: 128 MiB (DDR2) - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: - 2.4GHz (bgn) SoC internal - 5GHz (ac) QCA988x - USB: 1x USB 2.0 port - Button: 1x power, 1x reset, 1x wps - LED: 10x LEDs - UART: holes in PCB - Vcc, GND, RX, TX from ethernet port side - 115200n8 Flash instructions: Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin via the Webinterface. Flash instruction using tftp recovery: 1. Connect the computer to one of the LAN ports of the Archer A7 2. Set the computer IP to 192.168.0.66 3. Start a tftp server with the OpenWrt factory image in the tftp root directory renamed to ArcherC7v5_tp_recovery.bin 2. Connect power cable to Archer A7, press and hold the reset button and turn the router on 3. Keep the reset button pressed for ~5 seconds 4. Wait ~150 seconds to complete flashing Changes since first revision: - Flash instructions using stock image webinterface - Changed "Version 5" in model string to "v5" - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi and qca9563_tplink_archer-a7-v5.dts - Firmware image is now build with dynamic partitioning - Default to ath10k-ct Changes since second revision: - Changed uboot@0 to uboot@20000 in DTS file - Fixed ordering issue in board led script - Specify firmware partition format in DTS file - Rebased Makefile device definition on common Device/tplink-safeloader-uimage definition - Merged switch section in network script (same configuration as tplink,tl-wdr3600 and tplink,tl-wdr4300) Signed-off-by: Karl-Felix Glatzer --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 06fb8f4791..96cc5d5c13 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -52,6 +52,13 @@ pcs,cr3000) ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10" ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02" ;; +tplink,archer-a7-v5) + ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02" + ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04" + ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" + ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10" + ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20" + ;; tplink,archer-c58-v1|\ tplink,archer-c59-v1) ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 9363440438..1d6cd4e774 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -134,6 +134,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" ;; + tplink,archer-a7-v5|\ tplink,tl-wdr3600|\ tplink,tl-wdr4300) ucidef_add_switch "switch0" \ diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 82c23e3079..9ecda22244 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -104,6 +104,7 @@ case "$FIRMWARE" in ath10kcal_extract "ART" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; + tplink,archer-a7-v5|\ tplink,archer-c7-v2) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-a7-v5.dts b/target/linux/ath79/dts/qca9563_tplink_archer-a7-v5.dts new file mode 100644 index 0000000000..8cf86c0bc4 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_archer-a7-v5.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "qca9563_tplink_archer-x7-v5.dtsi" + +/ { + compatible = "tplink,archer-a7-v5", "qca,qca9563"; + model = "TP-Link Archer A7 v5"; +}; + +&mtdparts { + factory-uboot@0 { + label = "factory-uboot"; + reg = <0x000000 0x020000>; + read-only; + }; + + uboot: u-boot@20000 { + label = "u-boot"; + reg = <0x020000 0x020000>; + read-only; + }; + + firmware@40000 { + label = "firmware"; + reg = <0x040000 0xec0000>; + compatible = "denx,uimage"; + }; + + info: info@f40000 { + label = "info"; + reg = <0xf40000 0x020000>; + }; + + config: config@f60000 { + label = "config"; + reg = <0xf60000 0x050000>; + }; + + partition@fc0000 { + label = "partition-table"; + reg = <0xfc0000 0x010000>; + }; + + art: art@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; +}; diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi new file mode 100644 index 0000000000..b182aa2d37 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca956x.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-status = &system; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + + system: system { + label = "tp-link:green:system"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led_wlan2g: wlan2g { + label = "tp-link:green:wlan2g"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy1tpt"; + }; + + usb { + label = "tp-link:green:usb"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + trigger-sources = <&hub_port0>; + linux,default-trigger = "usbport"; + }; + }; + + gpio_keys: keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + wps { + label = "WPS button"; + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio_usb_power { + gpio-export,name = "tp-link:power:usb"; + gpio-export,output = <1>; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port0: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&gpio_leds { + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + + wan { + label = "tp-link:green:wan"; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wan_fail { + label = "tp-link:orange:wan"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan1 { + label = "tp-link:green:lan1"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan2 { + label = "tp-link:green:lan2"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan3 { + label = "tp-link:green:lan3"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + lan4 { + label = "tp-link:green:lan4"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + wps { + label = "tp-link:green:wps"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + mtdparts: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "sgmii"; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x10 0x81000080 /* POWER_ON_STRIP */ + 0x50 0xcc35cc35 /* LED_CTRL0 */ + 0x54 0xcb37cb37 /* LED_CTRL1 */ + 0x58 0x00000000 /* LED_CTRL2 */ + 0x5c 0x00f3cf00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x03000101 0x00000101 0x00001919>; + + phy-mode = "sgmii"; + mtd-mac-address = <&info 0x8>; + phy-handle = <&phy0>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&info 0x8>; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 3688c69fa4..2a883b253a 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -1,5 +1,17 @@ include ./common-tp-link.mk +define Device/tplink_archer-a7-v5 + $(Device/tplink-safeloader-uimage) + ATH_SOC := qca9563 + IMAGE_SIZE := 15104k + DEVICE_TITLE := TP-LINK Archer A7 v5 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct + TPLINK_BOARD_ID := ARCHER-A7-V5 + BOARDNAME := ARCHER-A7-V5 + SUPPORTED_DEVICES += archer-a7-v5 +endef +TARGET_DEVICES += tplink_archer-a7-v5 + define Device/tplink_archer-c58-v1 $(Device/tplink-safeloader-uimage) ATH_SOC := qca9561 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 2959a212f8..358247e626 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -357,6 +357,46 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the A7-V5 */ + { + .id = "ARCHER-A7-V5", + .support_list = + "SupportList:\n" + "{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n" + "{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n" + "{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n" + "{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n" + "{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n", + .support_trail = '\x00', + .soft_ver = "soft_ver:1.0.0\n", + + /* We're using a dynamic kernel/rootfs split here */ + .partitions = { + {"factory-boot", 0x00000, 0x20000}, + {"fs-uboot", 0x20000, 0x20000}, + {"firmware", 0x40000, 0xec0000}, /* Stock: name os-image base 0x40000 size 0x120000 */ + /* Stock: name file-system base 0x160000 size 0xda0000 */ + {"default-mac", 0xf40000, 0x00200}, + {"pin", 0xf40200, 0x00200}, + {"device-id", 0xf40400, 0x00100}, + {"product-info", 0xf40500, 0x0fb00}, + {"soft-version", 0xf50000, 0x00100}, + {"extra-para", 0xf51000, 0x01000}, + {"support-list", 0xf52000, 0x0a000}, + {"profile", 0xf5c000, 0x04000}, + {"default-config", 0xf60000, 0x10000}, + {"user-config", 0xf70000, 0x40000}, + {"certificate", 0xfb0000, 0x10000}, + {"partition-table", 0xfc0000, 0x10000}, + {"log", 0xfd0000, 0x20000}, + {"radio", 0xff0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system", + }, + /** Firmware layout for the C25v1 */ { .id = "ARCHER-C25-V1", @@ -1581,7 +1621,7 @@ static void build_image(const char *output, strcasecmp(info->id, "TLWR1043NV5") == 0) { const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00}; parts[5] = put_data("extra-para", mdat, 11); - } else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) { + } else if (strcasecmp(info->id, "ARCHER-A7-V5") == 0 || strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) { const char mdat[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00}; parts[5] = put_data("extra-para", mdat, 11); }