From: Finn Thain Date: Tue, 3 Nov 2009 13:40:23 +0000 (+1100) Subject: pmac-zilog: cleanup X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=1f7b5fff505232521a7a770a639b63cd17636549;p=openwrt%2Fstaging%2Fblogic.git pmac-zilog: cleanup Whitespace cleanups and comment typo fix. Signed-off-by: Finn Thain Acked-by: Benjamin Herrenschmidt Signed-off-by: Geert Uytterhoeven --- diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 3e2ae4807ae2..1c8afd98e14e 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -153,8 +153,8 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) write_zsreg(uap, R10, regs[R10]); /* Set TX/RX controls sans the enable bits. */ - write_zsreg(uap, R3, regs[R3] & ~RxENABLE); - write_zsreg(uap, R5, regs[R5] & ~TxENABLE); + write_zsreg(uap, R3, regs[R3] & ~RxENABLE); + write_zsreg(uap, R5, regs[R5] & ~TxENABLE); /* now set R7 "prime" on ESCC */ write_zsreg(uap, R15, regs[R15] | EN85C30); @@ -205,7 +205,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) */ static void pmz_maybe_update_regs(struct uart_pmac_port *uap) { - if (!ZS_REGS_HELD(uap)) { + if (!ZS_REGS_HELD(uap)) { if (ZS_TX_ACTIVE(uap)) { uap->flags |= PMACZILOG_FLAG_REGS_HELD; } else { @@ -281,7 +281,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) spin_lock(&uap->port.lock); if (swallow) goto next_char; - } + } #endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ /* A real serial line, record the character and status. */ @@ -317,7 +317,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) if (uap->port.ignore_status_mask == 0xff || (r1 & uap->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(tty, ch, flag); } if (r1 & Rx_OVR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); @@ -470,47 +470,47 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) uap_a = pmz_get_port_A(uap); uap_b = uap_a->mate; - - spin_lock(&uap_a->port.lock); + + spin_lock(&uap_a->port.lock); r3 = read_zsreg(uap_a, R3); #ifdef DEBUG_HARD pmz_debug("irq, r3: %x\n", r3); #endif - /* Channel A */ + /* Channel A */ tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { write_zsreg(uap_a, R0, RES_H_IUS); zssync(uap_a); - if (r3 & CHAEXT) - pmz_status_handle(uap_a); + if (r3 & CHAEXT) + pmz_status_handle(uap_a); if (r3 & CHARxIP) tty = pmz_receive_chars(uap_a); - if (r3 & CHATxIP) - pmz_transmit_chars(uap_a); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_a->port.lock); + if (r3 & CHATxIP) + pmz_transmit_chars(uap_a); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_a->port.lock); if (tty != NULL) tty_flip_buffer_push(tty); if (uap_b->node == NULL) goto out; - spin_lock(&uap_b->port.lock); + spin_lock(&uap_b->port.lock); tty = NULL; if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { write_zsreg(uap_b, R0, RES_H_IUS); zssync(uap_b); - if (r3 & CHBEXT) - pmz_status_handle(uap_b); - if (r3 & CHBRxIP) - tty = pmz_receive_chars(uap_b); - if (r3 & CHBTxIP) - pmz_transmit_chars(uap_b); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_b->port.lock); + if (r3 & CHBEXT) + pmz_status_handle(uap_b); + if (r3 & CHBRxIP) + tty = pmz_receive_chars(uap_b); + if (r3 & CHBTxIP) + pmz_transmit_chars(uap_b); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_b->port.lock); if (tty != NULL) tty_flip_buffer_push(tty); @@ -718,7 +718,7 @@ static void pmz_enable_ms(struct uart_port *port) if (ZS_IS_ASLEEP(uap)) return; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ write_zsreg(uap, R15, uap->curregs[R15]); } } @@ -748,7 +748,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) if (new_reg != uap->curregs[R5]) { uap->curregs[R5] = new_reg; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ if (ZS_IS_ASLEEP(uap)) return; write_zsreg(uap, R5, uap->curregs[R5]); @@ -908,7 +908,6 @@ static int __pmz_startup(struct uart_pmac_port *uap) /* Remember status for DCD/CTS changes */ uap->prev_status = read_zsreg(uap, R0); - return pwr_delay; } @@ -983,7 +982,7 @@ static int pmz_startup(struct uart_port *port) if (!ZS_IS_EXTCLK(uap)) uap->curregs[R1] |= EXT_INT_ENAB; write_zsreg(uap, R1, uap->curregs[R1]); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&port->lock, flags); pmz_debug("pmz: startup() done.\n"); @@ -1003,7 +1002,7 @@ static void pmz_shutdown(struct uart_port *port) mutex_lock(&pmz_irq_mutex); /* Release interrupt handler */ - free_irq(uap->port.irq, uap); + free_irq(uap->port.irq, uap); spin_lock_irqsave(&port->lock, flags); @@ -1051,7 +1050,6 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, { int brg; - /* Switch to external clocking for IrDA high clock rates. That * code could be re-used for Midi interfaces with different * multipliers @@ -1223,12 +1221,12 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) uap->curregs[R5] |= DTR; write_zsreg(uap, R5, uap->curregs[R5]); zssync(uap); - mdelay(1); + mdelay(1); /* Switch SCC to 19200 */ pmz_convert_to_zs(uap, CS8, 0, 19200); pmz_load_zsregs(uap, uap->curregs); - mdelay(1); + mdelay(1); /* Write get_version command byte */ write_zsdata(uap, 1); @@ -1463,7 +1461,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) return -ENODEV; uap->port.mapbase = r_ports.start; uap->port.membase = ioremap(uap->port.mapbase, 0x1000); - + uap->control_reg = uap->port.membase; uap->data_reg = uap->control_reg + 0x10; @@ -1590,7 +1588,7 @@ static void pmz_dispose_port(struct uart_pmac_port *uap) } /* - * Called upon match with an escc node in the devive-tree. + * Called upon match with an escc node in the device-tree. */ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) { @@ -1812,7 +1810,7 @@ static int __init pmz_probe(void) pmz_ports[count].node = node_a; pmz_ports[count+1].node = node_b; pmz_ports[count].port.line = count; - pmz_ports[count+1].port.line = count+1; + pmz_ports[count+1].port.line = count+1; /* * Setup the ports for real @@ -1899,23 +1897,22 @@ err_out: static struct of_device_id pmz_match[] = { { - .name = "ch-a", + .name = "ch-a", }, { - .name = "ch-b", + .name = "ch-b", }, {}, }; MODULE_DEVICE_TABLE (of, pmz_match); -static struct macio_driver pmz_driver = -{ +static struct macio_driver pmz_driver = { .name = "pmac_zilog", .match_table = pmz_match, .probe = pmz_attach, .remove = pmz_detach, .suspend = pmz_suspend, - .resume = pmz_resume, + .resume = pmz_resume, }; static int __init init_pmz(void) @@ -1952,7 +1949,7 @@ static int __init init_pmz(void) pmz_dispose_port(&pmz_ports[i]); return rc; } - + /* * Then we register the macio driver itself */ @@ -2034,7 +2031,7 @@ static int __init pmz_console_setup(struct console *co, char *options) if (of_machine_is_compatible("RackMac1,1") || of_machine_is_compatible("RackMac1,2") || of_machine_is_compatible("MacRISC4")) - baud = 57600; + baud = 57600; /* * Check whether an invalid uart number has been specified, and diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h index f6e77f12acd5..f18c426324a4 100644 --- a/drivers/serial/pmac_zilog.h +++ b/drivers/serial/pmac_zilog.h @@ -1,7 +1,7 @@ #ifndef __PMAC_ZILOG_H__ #define __PMAC_ZILOG_H__ -#define pmz_debug(fmt,arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) /* * At most 2 ESCCs with 2 ports each @@ -113,7 +113,7 @@ static inline void zssync(struct uart_pmac_port *port) #define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) #define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) -#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ +#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ /* The Zilog register set */ @@ -171,7 +171,7 @@ static inline void zssync(struct uart_pmac_port *port) /* Write Register 3 */ -#define RxENABLE 0x1 /* Rx Enable */ +#define RxENABLE 0x1 /* Rx Enable */ #define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ #define ADD_SM 0x4 /* Address Search Mode (SDLC) */ #define RxCRC_ENAB 0x8 /* Rx CRC Enable */ @@ -185,7 +185,7 @@ static inline void zssync(struct uart_pmac_port *port) /* Write Register 4 */ -#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_ENAB 0x1 /* Parity Enable */ #define PAR_EVEN 0x2 /* Parity Even/Odd* */ #define SYNC_ENAB 0 /* Sync Modes Enable */ @@ -210,7 +210,7 @@ static inline void zssync(struct uart_pmac_port *port) #define TxCRC_ENAB 0x1 /* Tx CRC Enable */ #define RTS 0x2 /* RTS */ #define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENABLE 0x8 /* Tx Enable */ +#define TxENABLE 0x8 /* Tx Enable */ #define SND_BRK 0x10 /* Send Break */ #define Tx5 0x0 /* Tx 5 bits (or less)/character */ #define Tx7 0x20 /* Tx 7 bits/character */ @@ -372,11 +372,11 @@ static inline void zssync(struct uart_pmac_port *port) #define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE) #define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) #define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) -#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) +#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) #define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) -#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) -#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) -#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) -#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) +#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) +#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) +#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) +#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) #endif /* __PMAC_ZILOG_H__ */