From: Anton Blanchard Date: Sun, 2 Nov 2014 21:34:01 +0000 (+1100) Subject: powerpc/pseries: Quieten relocation on exceptions warning X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=20f1aae6cb0120fa54c0fe81614f6983df3b420a;p=openwrt%2Fstaging%2Fblogic.git powerpc/pseries: Quieten relocation on exceptions warning The H_SET_MODE hcall returns H_P2 if a function is not implemented and all callers should handle this case. The call to enable relocation on exceptions currently prints an error message if the feature is not implemented. While H_SET_MODE was first introduced on POWER8 (which has relocation on exceptions), it has been now added on some POWER7 configurations (which does not). Check for H_P2 and print an informational message instead. Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman --- diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index db0fc0c07568..8b8fb19a4097 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -499,7 +499,11 @@ static void __init pSeries_setup_arch(void) if (firmware_has_feature(FW_FEATURE_SET_MODE)) { long rc; - if ((rc = pSeries_enable_reloc_on_exc()) != H_SUCCESS) { + + rc = pSeries_enable_reloc_on_exc(); + if (rc == H_P2) { + pr_info("Relocation on exceptions not supported\n"); + } else if (rc != H_SUCCESS) { pr_warn("Unable to enable relocation on exceptions: " "%ld\n", rc); }