From: Mike McCormack Date: Mon, 20 Sep 2010 14:11:29 +0000 (+0900) Subject: staging: rtl8192e: Clean up function headers X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=214985a6d507694e9ede71936387cabb37d3378a;p=openwrt%2Fstaging%2Fblogic.git staging: rtl8192e: Clean up function headers Signed-off-by: Mike McCormack Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c index c475c5280c84..6ae0d7f6b65b 100644 --- a/drivers/staging/rtl8192e/r8192E_core.c +++ b/drivers/staging/rtl8192e/r8192E_core.c @@ -121,12 +121,10 @@ MODULE_DESCRIPTION("Linux driver for Realtek RTL819x WiFi cards"); module_param_string(ifname, ifname, sizeof(ifname), S_IRUGO|S_IWUSR); -//module_param(hwseqnum,int, S_IRUGO|S_IWUSR); module_param(hwwep,int, S_IRUGO|S_IWUSR); module_param(channels,int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ifname," Net interface name, wlan%d=default"); -//MODULE_PARM_DESC(hwseqnum," Try to use hardware 802.11 header sequence numbers. Zero=default"); MODULE_PARM_DESC(hwwep," Try to use hardware WEP support. Still broken and not available on all cards"); MODULE_PARM_DESC(channels," Channel bitmask for specific locales. NYI"); @@ -144,7 +142,7 @@ static struct pci_driver rtl8192_pci_driver = { .resume = rtl8192E_resume, /* PM resume fn */ #else .suspend = NULL, /* PM suspend fn */ - .resume = NULL, /* PM resume fn */ + .resume = NULL, /* PM resume fn */ #endif }; @@ -282,7 +280,6 @@ u32 read_cam(struct net_device *dev, u8 addr) return read_nic_dword(dev, 0xa8); } -//////////////////////////////////////////////////////////// #ifdef CONFIG_RTL8180_IO_MAP u8 read_nic_byte(struct net_device *dev, int x) @@ -487,29 +484,16 @@ rtl8192e_SetHwReg(struct net_device *dev,u8 variable,u8* val) } - -/////////////////////////////////////////////////////////// - -//u8 read_phy_cck(struct net_device *dev, u8 adr); -//u8 read_phy_ofdm(struct net_device *dev, u8 adr); -/* this might still called in what was the PHY rtl8185/rtl8192 common code +/* + * this might still called in what was the PHY rtl8185/rtl8192 common code * plans are to possibilty turn it again in one common code... */ void force_pci_posting(struct net_device *dev) { } - -//void rtl8192_rq_tx_ack(struct work_struct *work); - -/**************************************************************************** - -----------------------------PROCFS STUFF------------------------- -*****************************************************************************/ - static struct proc_dir_entry *rtl8192_proc = NULL; - - static int proc_get_stats_ap(char *page, char **start, off_t offset, int count, int *eof, void *data) @@ -797,9 +781,6 @@ static void rtl8192_proc_init_one(struct net_device *dev) dev->name); } } -/**************************************************************************** - -----------------------------MISC STUFF------------------------- -*****************************************************************************/ short check_nic_enough_desc(struct net_device *dev, int prio) { @@ -821,12 +802,6 @@ static void tx_timeout(struct net_device *dev) printk("TXTIMEOUT"); } - -/**************************************************************************** - ------------------------------HW STUFF--------------------------- -*****************************************************************************/ - - static void rtl8192_irq_enable(struct net_device *dev) { struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); @@ -834,7 +809,6 @@ static void rtl8192_irq_enable(struct net_device *dev) write_nic_dword(dev,INTA_MASK, priv->irq_mask); } - void rtl8192_irq_disable(struct net_device *dev) { struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); @@ -1088,14 +1062,6 @@ void rtl8192_halt_adapter(struct net_device *dev, bool reset) skb_queue_purge(&priv->skb_queue); } -#if 0 -static void rtl8192_reset(struct net_device *dev) -{ - rtl8192_irq_disable(dev); - printk("This is RTL819xP Reset procedure\n"); -} -#endif - static const u16 rtl_rate[] = {10,20,55,110,60,90,120,180,240,360,480,540}; inline u16 rtl8192_rate2rate(short rate) { @@ -1103,9 +1069,6 @@ inline u16 rtl8192_rate2rate(short rate) return rtl_rate[rate]; } - - - static void rtl8192_data_hard_stop(struct net_device *dev) { //FIXME !! @@ -1131,7 +1094,8 @@ static void rtl8192_data_hard_resume(struct net_device *dev) #endif } -/* this function TX data frames when the ieee80211 stack requires this. +/* + * this function TX data frames when the ieee80211 stack requires this. * It checks also if we need to stop the ieee tx queue, eventually do it */ static void rtl8192_hard_data_xmit(struct sk_buff *skb, struct net_device *dev, int rate) @@ -1176,7 +1140,8 @@ static void rtl8192_hard_data_xmit(struct sk_buff *skb, struct net_device *dev, // return ret; } -/* This is a rough attempt to TX a frame +/* + * This is a rough attempt to TX a frame * This is called by the ieee 80211 stack to TX management frames. * If the ring is full packet are dropped (for data frame the queue * is stopped before this can happen). @@ -1455,10 +1420,7 @@ void rtl819xE_tx_cmd(struct net_device *dev, struct sk_buff *skb) /* * Mapping Software/Hardware descriptor queue id to "Queue Select Field" * in TxFwInfo data structure - * 2006.10.30 by Emily - * - * \param QUEUEID Software Queue -*/ + */ static u8 MapHwQueueToFirmwareQueue(u8 QueueID) { u8 QueueSelect = 0x0; //defualt set to @@ -1564,7 +1526,7 @@ static u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc) * The tx procedure is just as following, * skb->cb will contain all the following information, * priority, morefrag, rate, &dev. - * */ + */ short rtl8192_tx(struct net_device *dev, struct sk_buff* skb) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -1951,6 +1913,7 @@ static void rtl8192_update_beacon(struct work_struct * work) ieee->pHTInfo->bCurrentRT2RTLongSlotTime = net->bssht.bdRT2RTLongSlotTime; rtl8192_update_cap(dev, net->capability); } + /* * background support to run QoS activate functionality */ @@ -2046,10 +2009,9 @@ static int rtl8192_handle_beacon(struct net_device * dev, } /* -* handling the beaconing responses. if we get different QoS setting -* off the network from the associated setting, adjust the QoS -* setting -*/ + * handling the beaconing responses. if we get different QoS setting + * off the network from the associated setting, adjust the QoS setting + */ static int rtl8192_qos_association_resp(struct r8192_priv *priv, struct ieee80211_network *network) { @@ -2113,7 +2075,7 @@ static int rtl8192_handle_assoc_response(struct net_device *dev, } -//updateRATRTabel for MCS only. Basic rate is not implement. +/* updateRATRTabel for MCS only. Basic rate is not implemented. */ static void rtl8192_update_ratr_table(struct net_device* dev) { struct r8192_priv* priv = ieee80211_priv(dev); @@ -2281,7 +2243,6 @@ static void rtl8192_SetWirelessMode(struct net_device* dev, u8 wireless_mode) #endif } -//init priv variables here static bool GetHalfNmodeSupportByAPs819xPci(struct net_device* dev) { @@ -2405,6 +2366,7 @@ static void rtl8192_hw_to_sleep(struct net_device *dev, u32 th, u32 tl) spin_unlock_irqrestore(&priv->ps_lock,flags); } + static void rtl8192_init_priv_variable(struct net_device* dev) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -2571,7 +2533,6 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->rf_set_chan = rtl8192_phy_SwChnl; } -//init lock here static void rtl8192_init_priv_lock(struct r8192_priv* priv) { spin_lock_init(&priv->tx_lock); @@ -2585,7 +2546,7 @@ static void rtl8192_init_priv_lock(struct r8192_priv* priv) mutex_init(&priv->mutex); } -//init tasklet and wait_queue here. only 2.6 above kernel is considered +/* init tasklet and wait_queue here */ #define DRV_NAME "wlan0" static void rtl8192_init_priv_task(struct net_device* dev) { @@ -2637,7 +2598,10 @@ static void rtl8192_get_eeprom_size(struct net_device* dev) RT_TRACE(COMP_INIT, "<===========%s(), epromtype:%d\n", __FUNCTION__, priv->epromtype); } -//used to swap endian. as ntohl & htonl are not neccessary to swap endian, so use this instead. +/* + * used to swap endian. as ntohl & htonl are not + * neccessary to swap endian, so use this instead. + */ static inline u16 endian_swap(u16* data) { u16 tmp = *data; @@ -2646,9 +2610,9 @@ static inline u16 endian_swap(u16* data) } /* - * Note: Adapter->EEPROMAddressSize should be set before this function call. - * EEPROM address size can be got through GetEEPROMSize8185() -*/ + * Adapter->EEPROMAddressSize should be set before this function call. + * EEPROM address size can be got through GetEEPROMSize8185() + */ static void rtl8192_read_eeprom_info(struct net_device* dev) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -3205,14 +3169,11 @@ static short rtl8192_init(struct net_device *dev) return 0; } -/****************************************************************************** - *function: This function actually only set RRSR, RATR and BW_OPMODE registers - * not to do all the hw config as its name says - * input: net_device dev - * output: none - * return: none - * notice: This part need to modified according to the rate set we filtered - * ****************************************************************************/ +/* + * Actually only set RRSR, RATR and BW_OPMODE registers + * not to do all the hw config as its name says + * This part need to modified according to the rate set we filtered + */ static void rtl8192_hwconfig(struct net_device* dev) { u32 regRATR = 0, regRRSR = 0; @@ -3763,7 +3724,8 @@ static void rtl8192_prepare_beacon(struct r8192_priv *priv) } -/* this configures registers for beacon tx and enables it via +/* + * configure registers for beacon tx and enables it via * rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might * be used to stop beacon transmission */ @@ -3814,11 +3776,6 @@ static void rtl8192_start_beacon(struct net_device *dev) /* enable the interrupt for ad-hoc process */ rtl8192_irq_enable(dev); } -/*************************************************************************** - -------------------------------NET STUFF--------------------------- -***************************************************************************/ - - static bool HalTxCheckStuck8190Pci(struct net_device *dev) { @@ -3835,9 +3792,8 @@ static bool HalTxCheckStuck8190Pci(struct net_device *dev) } /* -* -* First added: 2006.11.19 by emily -*/ + * Assumption: RT_TX_SPINLOCK is acquired. + */ static RESET_TYPE TxCheckStuck(struct net_device *dev) { @@ -4187,7 +4143,7 @@ static void CamRestoreAllEntry(struct net_device *dev) * This function will do "system reset" to NIC when Tx or Rx is stuck. * The method checking Tx/Rx stuck of this function is supported by FW, * which reports Tx and Rx counter to register 0x128 and 0x130. - * */ + */ static void rtl819x_ifsilentreset(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -4346,10 +4302,7 @@ void InactivePsWorkItemCallback(struct net_device *dev) } #ifdef ENABLE_LPS -// -// Change current and default preamble mode. -// 2005.01.06, by rcnjko. -// +/* Change current and default preamble mode. */ bool MgntActSet_802_11_PowerSaveMode(struct net_device *dev, u8 rtPsMode) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -4394,14 +4347,7 @@ bool MgntActSet_802_11_PowerSaveMode(struct net_device *dev, u8 rtPsMode) return true; } -//================================================================================ -// Leisure Power Save in linked state. -//================================================================================ - -// -// Description: -// Enter the leisure power save mode. -// +/* Enter the leisure power save mode. */ void LeisurePSEnter(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -4437,10 +4383,7 @@ void LeisurePSEnter(struct net_device *dev) } -// -// Description: -// Leave the leisure power save mode. -// +/* Leave leisure power save mode. */ void LeisurePSLeave(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); @@ -4460,11 +4403,7 @@ void LeisurePSLeave(struct net_device *dev) #endif -// -// Description: -// Enter the inactive power save mode. RF will be off -// 2007.08.17, by shien chang. -// +/* Enter the inactive power save mode. RF will be off */ void IPSEnter(struct net_device *dev) { @@ -5084,21 +5023,7 @@ static u8 HwRateToMRate90(bool bIsHT, u8 rate) return ret_rate; } -/** - * Function: UpdateRxPktTimeStamp - * Overview: Recored down the TSF time stamp when receiving a packet - * - * Input: - * PADAPTER Adapter - * PRT_RFD pRfd, - * - * Output: - * PRT_RFD pRfd - * (pRfd->Status.TimeStampHigh is updated) - * (pRfd->Status.TimeStampLow is updated) - * Return: - * None - */ +/* Record the TSF time stamp when receiving a packet */ static void UpdateRxPktTimeStamp8190 (struct net_device *dev, struct ieee80211_rx_stats *stats) { struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); @@ -5123,16 +5048,14 @@ static long rtl819x_translate_todbm(u8 signal_strength_index)// 0-100 index. return signal_power; } -// -// Description: -// Update Rx signal related information in the packet reeived -// to RxStats. User application can query RxStats to realize -// current Rx signal status. -// -// Assumption: -// In normal operation, user only care about the information of the BSS -// and we shall invoke this function if the packet received is from the BSS. -// +/* + * Update Rx signal related information in the packet reeived + * to RxStats. User application can query RxStats to realize + * current Rx signal status. + * + * In normal operation, user only care about the information of the BSS + * and we shall invoke this function if the packet received is from the BSS. + */ static void rtl819x_update_rxsignalstatistics8190pci( struct r8192_priv * priv, @@ -5474,22 +5397,6 @@ static void rtl8192_process_phyinfo(struct r8192_priv * priv, u8* buffer,struct } -/*----------------------------------------------------------------------------- - * Function: rtl819x_query_rxpwrpercentage() - * - * Overview: - * - * Input: char antpower - * - * Output: NONE - * - * Return: 0-100 percentage - * - * Revised History: - * When Who Remark - * 05/26/2008 amy Create Version 0 porting from windows code. - * - *---------------------------------------------------------------------------*/ static u8 rtl819x_query_rxpwrpercentage( char antpower ) @@ -5529,11 +5436,7 @@ rtl819x_evm_dbtopercentage( return ret_val; } -// -// Description: -// We want good-looking for signal strength/quality -// 2007/7/19 01:09, by cosa. -// +/* We want good-looking for signal strength/quality */ static long rtl819x_signal_scale_mapping(long currsig) { long retsig; @@ -5969,20 +5872,7 @@ static void rtl8192_irq_tx_tasklet(struct r8192_priv *priv) rtl8192_tx_resume(priv->ieee80211->dev); } -/** -* Function: UpdateReceivedRateHistogramStatistics -* Overview: Recored down the received data rate -* -* Input: -* PADAPTER Adapter -* PRT_RFD pRfd, -* -* Output: -* PRT_TCB Adapter -* (Adapter->RxStats.ReceivedRateHistogram[] is updated) -* Return: -* None -*/ +/* Record the received data rate */ static void UpdateReceivedRateHistogramStatistics8190( struct net_device *dev, struct ieee80211_rx_stats* pstats @@ -5993,11 +5883,6 @@ static void UpdateReceivedRateHistogramStatistics8190( u32 rateIndex; u32 preamble_guardinterval; //1: short preamble/GI, 0: long preamble/GI - /* 2007/03/09 MH We will not update rate of packet from rx cmd queue. */ - #if 0 - if (pRfd->queue_id == CMPK_RX_QUEUE_ID) - return; - #endif if(pstats->bCRC) rcvType = 2; else if(pstats->bICV) @@ -6210,10 +6095,6 @@ static const struct net_device_ops rtl8192_netdev_ops = { .ndo_start_xmit = ieee80211_rtl_xmit, }; -/**************************************************************************** - ---------------------------- PCI_STUFF--------------------------- -*****************************************************************************/ - static int __devinit rtl8192_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -6830,6 +6711,7 @@ bool NicIFEnableNIC(struct net_device* dev) return (init_status == RT_STATUS_SUCCESS); } + bool NicIFDisableNIC(struct net_device* dev) { bool status = true; @@ -6854,9 +6736,5 @@ bool NicIFDisableNIC(struct net_device* dev) return status; } - -/*************************************************************************** - ------------------- module init / exit stubs ---------------- -****************************************************************************/ module_init(rtl8192_pci_module_init); module_exit(rtl8192_pci_module_exit);