From: Arturas Moskvinas Date: Sat, 8 Apr 2023 20:12:13 +0000 (+0300) Subject: uboot-sunxi: update support for FriendlyARM ZeroPI X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=21d02e598a0bf209cebc1c5b8f3e433913329107;p=openwrt%2Fstaging%2Fjow.git uboot-sunxi: update support for FriendlyARM ZeroPI Since commit torvalds/linux@bbc4d71 ("net: phy: realtek: fix rtl8211e rx/tx delay config") network is broken on the FriendlyELEC(ARM) ZeroPi. Replaces custom patches with upstream uboot patch: https://source.denx.de/u-boot/u-boot/-/commit/2527b24f39d8f27ba2fd922ca27a1f14119cfa1b Signed-off-by: Arturas Moskvinas --- diff --git a/package/boot/uboot-sunxi/patches/250-sun8i-h3-add-support-for-zeropi.patch b/package/boot/uboot-sunxi/patches/250-sun8i-h3-add-support-for-zeropi.patch new file mode 100644 index 0000000000..838d90a7b0 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/250-sun8i-h3-add-support-for-zeropi.patch @@ -0,0 +1,148 @@ +From 2527b24f39d8f27ba2fd922ca27a1f14119cfa1b Mon Sep 17 00:00:00 2001 +From: Yu-Tung Chang +Date: Sat, 19 Jun 2021 16:16:45 +0800 +Subject: [PATCH] sunxi: h3: Add initial ZeroPi support + +ZeroPi is a new board of high performance with low cost +designed by FriendlyElec., using the Allwinner H3 SOC. + +ZeroPi features +- Allwinner H3, Quad-core Cortex-A7@1.2GHz +- 256MB/512MB DDR3 RAM +- microsd slot +- 10/100/1000Mbps Ethernet +- Debug Serial Port +- DC 5V/2A power-supply + +Signed-off-by: Yu-Tung Chang +Reviewed-by: Andre Przywara +Signed-off-by: Andre Przywara +--- +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -560,7 +560,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ + sun8i-h3-orangepi-plus.dtb \ + sun8i-h3-orangepi-plus2e.dtb \ + sun8i-h3-orangepi-zero-plus2.dtb \ +- sun8i-h3-rervision-dvk.dtb ++ sun8i-h3-rervision-dvk.dtb \ ++ sun8i-h3-zeropi.dtb + dtb-$(CONFIG_MACH_SUN8I_R40) += \ + sun8i-r40-bananapi-m2-ultra.dtb \ + sun8i-v40-bananapi-m2-berry.dtb +--- /dev/null ++++ b/arch/arm/dts/sun8i-h3-zeropi.dts +@@ -0,0 +1,85 @@ ++/* ++ * Copyright (C) 2020 Yu-Tung Chang ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include "sun8i-h3-nanopi.dtsi" ++ ++/ { ++ model = "FriendlyARM ZeroPi"; ++ compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3"; ++ ++ aliases { ++ ethernet0 = &emac; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ ++ }; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@7 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii-id"; ++ ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ ++&usb_otg { ++ status = "okay"; ++ dr_mode = "host"; ++}; +--- a/board/sunxi/MAINTAINERS ++++ b/board/sunxi/MAINTAINERS +@@ -508,3 +508,9 @@ YONES TOPTECH BS1078 V2 BOARD + M: Peter Korsgaard + S: Maintained + F: configs/Yones_Toptech_BS1078_V2_defconfig ++ ++ZEROPI BOARD ++M: Yu-Tung Chang ++S: Maintained ++F: configs/zeropi_defconfig ++F: arch/arm/dts/sun8i-h3-zeropi.dts +--- /dev/null ++++ b/configs/zeropi_defconfig +@@ -0,0 +1,13 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-zeropi" ++CONFIG_SPL=y ++CONFIG_MACH_SUN8I_H3=y ++CONFIG_DRAM_CLK=408 ++CONFIG_MACPWR="PD6" ++# CONFIG_VIDEO_DE2 is not set ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++CONFIG_CONSOLE_MUX=y ++CONFIG_SUN8I_EMAC=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_OHCI_HCD=y diff --git a/package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch b/package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch deleted file mode 100644 index 152e608951..0000000000 --- a/package/boot/uboot-sunxi/patches/250-sun8i-h3-zeropi-add-device-tree.patch +++ /dev/null @@ -1,81 +0,0 @@ ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -559,7 +559,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \ - sun8i-h3-orangepi-plus.dtb \ - sun8i-h3-orangepi-plus2e.dtb \ - sun8i-h3-orangepi-zero-plus2.dtb \ -- sun8i-h3-rervision-dvk.dtb -+ sun8i-h3-rervision-dvk.dtb \ -+ sun8i-h3-zeropi.dtb - dtb-$(CONFIG_MACH_SUN8I_R40) += \ - sun8i-r40-bananapi-m2-ultra.dtb \ - sun8i-v40-bananapi-m2-berry.dtb ---- /dev/null -+++ b/arch/arm/dts/sun8i-h3-zeropi.dts -@@ -0,0 +1,66 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -+ -+#include "sun8i-h3-nanopi.dtsi" -+ -+/ { -+ model = "FriendlyElec ZeroPi"; -+ compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3"; -+ -+ aliases { -+ ethernet0 = &emac; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_nanopi>; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; -+ }; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&pio { -+ gmac_power_pin_nanopi: gmac_power_pin@0 { -+ pins = "PD6"; -+ function = "gpio_out"; -+ }; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <7>; -+ }; -+}; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii"; -+ -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ -+&usb_otg { -+ status = "okay"; -+ dr_mode = "peripheral"; -+}; -+ -+&usbphy { -+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ -+}; diff --git a/package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch b/package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch deleted file mode 100644 index 76e333298e..0000000000 --- a/package/boot/uboot-sunxi/patches/251-sun8i-h3-zeropi-add-defconfig.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- /dev/null -+++ b/configs/zeropi_defconfig -@@ -0,0 +1,21 @@ -+CONFIG_ARM=y -+CONFIG_ARCH_SUNXI=y -+CONFIG_MACH_SUN8I_H3=y -+CONFIG_DRAM_CLK=408 -+CONFIG_DRAM_ZQ=3881979 -+CONFIG_DRAM_ODT_EN=y -+CONFIG_MACPWR="PD6" -+# CONFIG_VIDEO_DE2 is not set -+CONFIG_NR_DRAM_BANKS=1 -+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-zeropi" -+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -+CONFIG_CONSOLE_MUX=y -+CONFIG_SPL=y -+CONFIG_SYS_CLK_FREQ=480000000 -+# CONFIG_CMD_IMLS is not set -+# CONFIG_CMD_FLASH is not set -+# CONFIG_CMD_FPGA is not set -+CONFIG_SUN8I_EMAC=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_USB_EHCI_HCD=y -+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y