From: Roger Quadros Date: Fri, 22 Mar 2019 08:58:04 +0000 (+0200) Subject: phy: ti-pipe3: Introduce mode property in driver data X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=22940823f0629b2068c259fb859ed150b8563d8a;p=openwrt%2Fstaging%2Fblogic.git phy: ti-pipe3: Introduce mode property in driver data Introduce a mode property in the driver data so that we don't have to keep using "of_device_is_compatible()" throughtout the driver. No functional change. Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I --- diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c index 693acc167351..c3e0499bed3e 100644 --- a/drivers/phy/ti/phy-ti-pipe3.c +++ b/drivers/phy/ti/phy-ti-pipe3.c @@ -110,6 +110,10 @@ #define PLL_IDLE_TIME 100 /* in milliseconds */ #define PLL_LOCK_TIME 100 /* in milliseconds */ +enum pipe3_mode { PIPE3_MODE_PCIE = 1, + PIPE3_MODE_SATA, + PIPE3_MODE_USBSS }; + struct pipe3_dpll_params { u16 m; u8 n; @@ -141,6 +145,7 @@ struct ti_pipe3 { unsigned int power_reg; /* power reg. index within syscon */ unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */ bool sata_refclk_enabled; + enum pipe3_mode mode; }; static struct pipe3_dpll_map dpll_map_usb[] = { @@ -163,6 +168,25 @@ static struct pipe3_dpll_map dpll_map_sata[] = { { }, /* Terminator */ }; +struct pipe3_data { + enum pipe3_mode mode; + struct pipe3_dpll_map *dpll_map; +}; + +static struct pipe3_data data_usb = { + .mode = PIPE3_MODE_USBSS, + .dpll_map = dpll_map_usb, +}; + +static struct pipe3_data data_sata = { + .mode = PIPE3_MODE_SATA, + .dpll_map = dpll_map_sata, +}; + +static struct pipe3_data data_pcie = { + .mode = PIPE3_MODE_PCIE, +}; + static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset) { return __raw_readl(addr + offset); @@ -340,7 +364,7 @@ static int ti_pipe3_init(struct phy *x) * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table * 18-1804. */ - if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { + if (phy->mode == PIPE3_MODE_PCIE) { if (!phy->pcs_syscon) { omap_control_pcie_pcs(phy->control_dev, 0x96); return 0; @@ -367,8 +391,7 @@ static int ti_pipe3_init(struct phy *x) /* SATA has issues if re-programmed when locked */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node, - "ti,phy-pipe3-sata")) + if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA) return ret; /* Program the DPLL */ @@ -390,12 +413,11 @@ static int ti_pipe3_exit(struct phy *x) /* If dpll_reset_syscon is not present we wont power down SATA DPLL * due to Errata i783 */ - if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") && - !phy->dpll_reset_syscon) + if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon) return 0; /* PCIe doesn't have internal DPLL */ - if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { + if (phy->mode != PIPE3_MODE_PCIE) { /* Put DPLL in IDLE mode */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); val |= PLL_IDLE; @@ -418,7 +440,7 @@ static int ti_pipe3_exit(struct phy *x) } /* i783: SATA needs control bit toggle after PLL unlock */ - if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) { + if (phy->mode == PIPE3_MODE_SATA) { regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg, SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET); regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg, @@ -443,7 +465,6 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy) { struct clk *clk; struct device *dev = phy->dev; - struct device_node *node = dev->of_node; phy->refclk = devm_clk_get(dev, "refclk"); if (IS_ERR(phy->refclk)) { @@ -451,11 +472,11 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy) /* older DTBs have missing refclk in SATA PHY * so don't bail out in case of SATA PHY. */ - if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) + if (phy->mode != PIPE3_MODE_SATA) return PTR_ERR(phy->refclk); } - if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) { + if (phy->mode != PIPE3_MODE_SATA) { phy->wkupclk = devm_clk_get(dev, "wkupclk"); if (IS_ERR(phy->wkupclk)) { dev_err(dev, "unable to get wkupclk\n"); @@ -465,8 +486,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy) phy->wkupclk = ERR_PTR(-ENODEV); } - if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie") || - phy->phy_power_syscon) { + if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) { phy->sys_clk = devm_clk_get(dev, "sysclk"); if (IS_ERR(phy->sys_clk)) { dev_err(dev, "unable to get sysclk\n"); @@ -474,7 +494,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy) } } - if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { + if (phy->mode == PIPE3_MODE_PCIE) { clk = devm_clk_get(dev, "dpll_ref"); if (IS_ERR(clk)) { dev_err(dev, "unable to get dpll ref clk\n"); @@ -546,7 +566,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy) phy->control_dev = &control_pdev->dev; } - if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { + if (phy->mode == PIPE3_MODE_PCIE) { phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node, "syscon-pcs"); if (IS_ERR(phy->pcs_syscon)) { @@ -564,7 +584,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy) } } - if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) { + if (phy->mode == PIPE3_MODE_SATA) { phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node, "syscon-pllreset"); if (IS_ERR(phy->dpll_reset_syscon)) { @@ -589,10 +609,9 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy) { struct resource *res; struct device *dev = phy->dev; - struct device_node *node = dev->of_node; struct platform_device *pdev = to_platform_device(dev); - if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) + if (phy->mode != PIPE3_MODE_PCIE) return 0; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -611,24 +630,12 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy) static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy) { struct resource *res; - const struct of_device_id *match; struct device *dev = phy->dev; - struct device_node *node = dev->of_node; struct platform_device *pdev = to_platform_device(dev); - if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) + if (phy->mode == PIPE3_MODE_PCIE) return 0; - match = of_match_device(ti_pipe3_id_table, dev); - if (!match) - return -EINVAL; - - phy->dpll_map = (struct pipe3_dpll_map *)match->data; - if (!phy->dpll_map) { - dev_err(dev, "no DPLL data\n"); - return -EINVAL; - } - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); phy->pll_ctrl_base = devm_ioremap_resource(dev, res); @@ -640,15 +647,28 @@ static int ti_pipe3_probe(struct platform_device *pdev) struct ti_pipe3 *phy; struct phy *generic_phy; struct phy_provider *phy_provider; - struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; int ret; + const struct of_device_id *match; + struct pipe3_data *data; phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); if (!phy) return -ENOMEM; - phy->dev = dev; + match = of_match_device(ti_pipe3_id_table, dev); + if (!match) + return -EINVAL; + + data = (struct pipe3_data *)match->data; + if (!data) { + dev_err(dev, "no driver data\n"); + return -EINVAL; + } + + phy->dev = dev; + phy->mode = data->mode; + phy->dpll_map = data->dpll_map; ret = ti_pipe3_get_pll_base(phy); if (ret) @@ -672,7 +692,7 @@ static int ti_pipe3_probe(struct platform_device *pdev) /* * Prevent auto-disable of refclk for SATA PHY due to Errata i783 */ - if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) { + if (phy->mode == PIPE3_MODE_SATA) { if (!IS_ERR(phy->refclk)) { clk_prepare_enable(phy->refclk); phy->sata_refclk_enabled = true; @@ -762,18 +782,19 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy) static const struct of_device_id ti_pipe3_id_table[] = { { .compatible = "ti,phy-usb3", - .data = dpll_map_usb, + .data = &data_usb, }, { .compatible = "ti,omap-usb3", - .data = dpll_map_usb, + .data = &data_usb, }, { .compatible = "ti,phy-pipe3-sata", - .data = dpll_map_sata, + .data = &data_sata, }, { .compatible = "ti,phy-pipe3-pcie", + .data = &data_pcie, }, {} };