From: Günther Kelleter Date: Wed, 15 Feb 2017 09:36:49 +0000 (+0100) Subject: ar8216: flush ARL table during reset after init_globals X-Git-Tag: v18.06.0-rc1~3582 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=237454991618e0e8b7ceb8a8a2a43fca12c1a454;p=openwrt%2Fstaging%2Fpepe2k.git ar8216: flush ARL table during reset after init_globals commit 33b72b8e0faf7a39faabece584fd6da61cd8f8df "ar8216: adjust ATU flushing in case of link changes" introduced portwise flushing on link down events. Now the ARL table could be in a chaotic state after boot where ar8xxx_sw_get_arl_table looped forever (depending on the entries collected while booting). Signed-off-by: Günther Kelleter --- diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index f3c953b808..37877d513a 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -1194,6 +1194,7 @@ ar8xxx_sw_reset_switch(struct switch_dev *dev) priv->arl_age_time = AR8XXX_DEFAULT_ARL_AGE_TIME; chip->init_globals(priv); + chip->atu_flush(priv); mutex_unlock(&priv->reg_mutex);