From: Sebastian Kemper <sebastian_ml@gmx.net>
Date: Sat, 1 Dec 2018 18:13:50 +0000 (+0100)
Subject: image: add cameo-factory command
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=247fdceab6caa1d3bc29ca629833a2f705eb9d59;p=openwrt%2Fstaging%2Fzorun.git

image: add cameo-factory command

This command enables factory image generation for Cameo boards. On
upgrade the vendor firmware will check the size of the provided image
and if a specific string is located at the end of the binary.
cameo-factory will generate an image that the vendor firmware accepts.

Tested on a D-Link DIR-825 C1 with vendor firmwares 3.01 and 3.04.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
---

diff --git a/include/image-commands.mk b/include/image-commands.mk
index ac724d20ac..63539bad08 100644
--- a/include/image-commands.mk
+++ b/include/image-commands.mk
@@ -44,6 +44,18 @@ define Build/buffalo-dhp-image
 	mv $@.new $@
 endef
 
+# blow up binary to given size and put a given string at its end:
+# cameo-factory <size[k]> <string>
+define Build/cameo-factory
+	factory_stamp=$(word 2,$(1)); \
+	((reduced_size=$(subst k,*1024,$(word 1,$(1)))-$${#factory_stamp})); \
+	( \
+		dd if=$@ bs=$$reduced_size conv=sync; \
+		echo -n $$factory_stamp; \
+	) > $@.new && \
+	mv $@.new $@
+endef
+
 define Build/eva-image
 	$(STAGING_DIR_HOST)/bin/lzma2eva $(KERNEL_LOADADDR) $(KERNEL_LOADADDR) $@ $@.new
 	mv $@.new $@