From: Guo Chao Date: Mon, 21 Jul 2014 04:42:30 +0000 (+1000) Subject: powerpc/powernv: Enable M64 aperatus for PHB3 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=262af55;p=openwrt%2Fstaging%2Fblogic.git powerpc/powernv: Enable M64 aperatus for PHB3 This patch enables M64 aperatus for PHB3. We already had platform hook (ppc_md.pcibios_window_alignment) to affect the PCI resource assignment done in PCI core so that each PE's M32 resource was built on basis of M32 segment size. Similarly, we're using that for M64 assignment on basis of M64 segment size. * We're using last M64 BAR to cover M64 aperatus, and it's shared by all 256 PEs. * We don't support P7IOC yet. However, some function callbacks are added to (struct pnv_phb) so that we can reuse them on P7IOC in future. * PE, corresponding to PCI bus with large M64 BAR device attached, might span multiple M64 segments. We introduce "compound" PE to cover the case. The compound PE is a list of PEs and the master PE is used as before. The slave PEs are just for MMIO isolation. Signed-off-by: Guo Chao Signed-off-by: Benjamin Herrenschmidt --- diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 9d14aaba91e2..44e5083bf01a 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -340,6 +340,12 @@ enum OpalMveEnableAction { OPAL_ENABLE_MVE = 1 }; +enum OpalM64EnableAction { + OPAL_DISABLE_M64 = 0, + OPAL_ENABLE_M64_SPLIT = 1, + OPAL_ENABLE_M64_NON_SPLIT = 2 +}; + enum OpalPciResetScope { OPAL_PHB_COMPLETE = 1, OPAL_PCI_LINK = 2, OPAL_PHB_ERROR = 3, OPAL_PCI_HOT_RESET = 4, OPAL_PCI_FUNDAMENTAL_RESET = 5, @@ -768,7 +774,7 @@ int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type, uint16_t window_num, uint64_t starting_real_address, uint64_t starting_pci_address, - uint16_t segment_size); + uint64_t size); int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number, uint16_t window_type, uint16_t window_num, uint16_t segment_num); diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 0701f90ac625..899fe4049b44 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "powernv.h" #include "pci.h" @@ -82,6 +83,12 @@ static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr) : : "r" (val), "r" (paddr) : "memory"); } +static inline bool pnv_pci_is_mem_pref_64(unsigned long flags) +{ + return ((flags & (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH)) == + (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH)); +} + static int pnv_ioda_alloc_pe(struct pnv_phb *phb) { unsigned long pe; @@ -106,6 +113,240 @@ static void pnv_ioda_free_pe(struct pnv_phb *phb, int pe) clear_bit(pe, phb->ioda.pe_alloc); } +/* The default M64 BAR is shared by all PEs */ +static int pnv_ioda2_init_m64(struct pnv_phb *phb) +{ + const char *desc; + struct resource *r; + s64 rc; + + /* Configure the default M64 BAR */ + rc = opal_pci_set_phb_mem_window(phb->opal_id, + OPAL_M64_WINDOW_TYPE, + phb->ioda.m64_bar_idx, + phb->ioda.m64_base, + 0, /* unused */ + phb->ioda.m64_size); + if (rc != OPAL_SUCCESS) { + desc = "configuring"; + goto fail; + } + + /* Enable the default M64 BAR */ + rc = opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, + phb->ioda.m64_bar_idx, + OPAL_ENABLE_M64_SPLIT); + if (rc != OPAL_SUCCESS) { + desc = "enabling"; + goto fail; + } + + /* Mark the M64 BAR assigned */ + set_bit(phb->ioda.m64_bar_idx, &phb->ioda.m64_bar_alloc); + + /* + * Strip off the segment used by the reserved PE, which is + * expected to be 0 or last one of PE capabicity. + */ + r = &phb->hose->mem_resources[1]; + if (phb->ioda.reserved_pe == 0) + r->start += phb->ioda.m64_segsize; + else if (phb->ioda.reserved_pe == (phb->ioda.total_pe - 1)) + r->end -= phb->ioda.m64_segsize; + else + pr_warn(" Cannot strip M64 segment for reserved PE#%d\n", + phb->ioda.reserved_pe); + + return 0; + +fail: + pr_warn(" Failure %lld %s M64 BAR#%d\n", + rc, desc, phb->ioda.m64_bar_idx); + opal_pci_phb_mmio_enable(phb->opal_id, + OPAL_M64_WINDOW_TYPE, + phb->ioda.m64_bar_idx, + OPAL_DISABLE_M64); + return -EIO; +} + +static void pnv_ioda2_alloc_m64_pe(struct pnv_phb *phb) +{ + resource_size_t sgsz = phb->ioda.m64_segsize; + struct pci_dev *pdev; + struct resource *r; + int base, step, i; + + /* + * Root bus always has full M64 range and root port has + * M64 range used in reality. So we're checking root port + * instead of root bus. + */ + list_for_each_entry(pdev, &phb->hose->bus->devices, bus_list) { + for (i = PCI_BRIDGE_RESOURCES; + i <= PCI_BRIDGE_RESOURCE_END; i++) { + r = &pdev->resource[i]; + if (!r->parent || + !pnv_pci_is_mem_pref_64(r->flags)) + continue; + + base = (r->start - phb->ioda.m64_base) / sgsz; + for (step = 0; step < resource_size(r) / sgsz; step++) + set_bit(base + step, phb->ioda.pe_alloc); + } + } +} + +static int pnv_ioda2_pick_m64_pe(struct pnv_phb *phb, + struct pci_bus *bus, int all) +{ + resource_size_t segsz = phb->ioda.m64_segsize; + struct pci_dev *pdev; + struct resource *r; + struct pnv_ioda_pe *master_pe, *pe; + unsigned long size, *pe_alloc; + bool found; + int start, i, j; + + /* Root bus shouldn't use M64 */ + if (pci_is_root_bus(bus)) + return IODA_INVALID_PE; + + /* We support only one M64 window on each bus */ + found = false; + pci_bus_for_each_resource(bus, r, i) { + if (r && r->parent && + pnv_pci_is_mem_pref_64(r->flags)) { + found = true; + break; + } + } + + /* No M64 window found ? */ + if (!found) + return IODA_INVALID_PE; + + /* Allocate bitmap */ + size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long)); + pe_alloc = kzalloc(size, GFP_KERNEL); + if (!pe_alloc) { + pr_warn("%s: Out of memory !\n", + __func__); + return IODA_INVALID_PE; + } + + /* + * Figure out reserved PE numbers by the PE + * the its child PEs. + */ + start = (r->start - phb->ioda.m64_base) / segsz; + for (i = 0; i < resource_size(r) / segsz; i++) + set_bit(start + i, pe_alloc); + + if (all) + goto done; + + /* + * If the PE doesn't cover all subordinate buses, + * we need subtract from reserved PEs for children. + */ + list_for_each_entry(pdev, &bus->devices, bus_list) { + if (!pdev->subordinate) + continue; + + pci_bus_for_each_resource(pdev->subordinate, r, i) { + if (!r || !r->parent || + !pnv_pci_is_mem_pref_64(r->flags)) + continue; + + start = (r->start - phb->ioda.m64_base) / segsz; + for (j = 0; j < resource_size(r) / segsz ; j++) + clear_bit(start + j, pe_alloc); + } + } + + /* + * the current bus might not own M64 window and that's all + * contributed by its child buses. For the case, we needn't + * pick M64 dependent PE#. + */ + if (bitmap_empty(pe_alloc, phb->ioda.total_pe)) { + kfree(pe_alloc); + return IODA_INVALID_PE; + } + + /* + * Figure out the master PE and put all slave PEs to master + * PE's list to form compound PE. + */ +done: + master_pe = NULL; + i = -1; + while ((i = find_next_bit(pe_alloc, phb->ioda.total_pe, i + 1)) < + phb->ioda.total_pe) { + pe = &phb->ioda.pe_array[i]; + pe->phb = phb; + pe->pe_number = i; + + if (!master_pe) { + pe->flags |= PNV_IODA_PE_MASTER; + INIT_LIST_HEAD(&pe->slaves); + master_pe = pe; + } else { + pe->flags |= PNV_IODA_PE_SLAVE; + pe->master = master_pe; + list_add_tail(&pe->list, &master_pe->slaves); + } + } + + kfree(pe_alloc); + return master_pe->pe_number; +} + +static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb) +{ + struct pci_controller *hose = phb->hose; + struct device_node *dn = hose->dn; + struct resource *res; + const u32 *r; + u64 pci_addr; + + if (!firmware_has_feature(FW_FEATURE_OPALv3)) { + pr_info(" Firmware too old to support M64 window\n"); + return; + } + + r = of_get_property(dn, "ibm,opal-m64-window", NULL); + if (!r) { + pr_info(" No on %s\n", + dn->full_name); + return; + } + + /* FIXME: Support M64 for P7IOC */ + if (phb->type != PNV_PHB_IODA2) { + pr_info(" Not support M64 window\n"); + return; + } + + res = &hose->mem_resources[1]; + res->start = of_translate_address(dn, r + 2); + res->end = res->start + of_read_number(r + 4, 2) - 1; + res->flags = (IORESOURCE_MEM | IORESOURCE_MEM_64 | IORESOURCE_PREFETCH); + pci_addr = of_read_number(r, 2); + hose->mem_offset[1] = res->start - pci_addr; + + phb->ioda.m64_size = resource_size(res); + phb->ioda.m64_segsize = phb->ioda.m64_size / phb->ioda.total_pe; + phb->ioda.m64_base = pci_addr; + + /* Use last M64 BAR to cover M64 window */ + phb->ioda.m64_bar_idx = 15; + phb->init_m64 = pnv_ioda2_init_m64; + phb->alloc_m64_pe = pnv_ioda2_alloc_m64_pe; + phb->pick_m64_pe = pnv_ioda2_pick_m64_pe; +} + /* Currently those 2 are only used when MSIs are enabled, this will change * but in the meantime, we need to protect them to avoid warnings */ @@ -363,9 +604,16 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all) struct pci_controller *hose = pci_bus_to_host(bus); struct pnv_phb *phb = hose->private_data; struct pnv_ioda_pe *pe; - int pe_num; + int pe_num = IODA_INVALID_PE; + + /* Check if PE is determined by M64 */ + if (phb->pick_m64_pe) + pe_num = phb->pick_m64_pe(phb, bus, all); + + /* The PE number isn't pinned by M64 */ + if (pe_num == IODA_INVALID_PE) + pe_num = pnv_ioda_alloc_pe(phb); - pe_num = pnv_ioda_alloc_pe(phb); if (pe_num == IODA_INVALID_PE) { pr_warning("%s: Not enough PE# available for PCI bus %04x:%02x\n", __func__, pci_domain_nr(bus), bus->number); @@ -373,7 +621,7 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, int all) } pe = &phb->ioda.pe_array[pe_num]; - pe->flags = (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS); + pe->flags |= (all ? PNV_IODA_PE_BUS_ALL : PNV_IODA_PE_BUS); pe->pbus = bus; pe->pdev = NULL; pe->tce32_seg = -1; @@ -441,8 +689,15 @@ static void pnv_ioda_setup_PEs(struct pci_bus *bus) static void pnv_pci_ioda_setup_PEs(void) { struct pci_controller *hose, *tmp; + struct pnv_phb *phb; list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + phb = hose->private_data; + + /* M64 layout might affect PE allocation */ + if (phb->alloc_m64_pe) + phb->alloc_m64_pe(phb); + pnv_ioda_setup_PEs(hose->bus); } } @@ -1071,9 +1326,6 @@ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose, index++; } } else if (res->flags & IORESOURCE_MEM) { - /* WARNING: Assumes M32 is mem region 0 in PHB. We need to - * harden that algorithm when we start supporting M64 - */ region.start = res->start - hose->mem_offset[0] - phb->ioda.m32_pci_base; @@ -1193,7 +1445,10 @@ static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus, bridge = bridge->bus->self; } - /* We need support prefetchable memory window later */ + /* We fail back to M32 if M64 isn't supported */ + if (phb->ioda.m64_segsize && + pnv_pci_is_mem_pref_64(type)) + return phb->ioda.m64_segsize; if (type & IORESOURCE_MEM) return phb->ioda.m32_segsize; @@ -1314,6 +1569,10 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, prop32 = of_get_property(np, "ibm,opal-reserved-pe", NULL); if (prop32) phb->ioda.reserved_pe = be32_to_cpup(prop32); + + /* Parse 64-bit MMIO range */ + pnv_ioda_parse_m64_window(phb); + phb->ioda.m32_size = resource_size(&hose->mem_resources[0]); /* FW Has already off top 64k of M32 space (MSI space) */ phb->ioda.m32_size += 0x10000; @@ -1349,14 +1608,6 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, /* Calculate how many 32-bit TCE segments we have */ phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28; - /* Clear unusable m64 */ - hose->mem_resources[1].flags = 0; - hose->mem_resources[1].start = 0; - hose->mem_resources[1].end = 0; - hose->mem_resources[2].flags = 0; - hose->mem_resources[2].start = 0; - hose->mem_resources[2].end = 0; - #if 0 /* We should really do that ... */ rc = opal_pci_set_phb_mem_window(opal->phb_id, window_type, @@ -1366,12 +1617,16 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, segment_size); #endif - pr_info(" %d (%d) PE's M32: 0x%x [segment=0x%x]" - " IO: 0x%x [segment=0x%x]\n", - phb->ioda.total_pe, - phb->ioda.reserved_pe, - phb->ioda.m32_size, phb->ioda.m32_segsize, - phb->ioda.io_size, phb->ioda.io_segsize); + pr_info(" %03d (%03d) PE's M32: 0x%x [segment=0x%x]\n", + phb->ioda.total_pe, phb->ioda.reserved_pe, + phb->ioda.m32_size, phb->ioda.m32_segsize); + if (phb->ioda.m64_size) + pr_info(" M64: 0x%lx [segment=0x%lx]\n", + phb->ioda.m64_size, phb->ioda.m64_segsize); + if (phb->ioda.io_size) + pr_info(" IO: 0x%x [segment=0x%x]\n", + phb->ioda.io_size, phb->ioda.io_segsize); + phb->hose->ops = &pnv_pci_ops; #ifdef CONFIG_EEH @@ -1419,6 +1674,10 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL); ioda_eeh_phb_reset(hose, OPAL_DEASSERT_RESET); } + + /* Configure M64 window */ + if (phb->init_m64 && phb->init_m64(phb)) + hose->mem_resources[1].flags = 0; } void __init pnv_pci_init_ioda2_phb(struct device_node *np) diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 6f5ff6921dab..49da9f154950 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -21,6 +21,8 @@ enum pnv_phb_model { #define PNV_IODA_PE_DEV (1 << 0) /* PE has single PCI device */ #define PNV_IODA_PE_BUS (1 << 1) /* PE has primary PCI bus */ #define PNV_IODA_PE_BUS_ALL (1 << 2) /* PE has subordinate buses */ +#define PNV_IODA_PE_MASTER (1 << 3) /* Master PE in compound case */ +#define PNV_IODA_PE_SLAVE (1 << 4) /* Slave PE in compound case */ /* Data associated with a PE, including IOMMU tracking etc.. */ struct pnv_phb; @@ -64,6 +66,10 @@ struct pnv_ioda_pe { */ int mve_number; + /* PEs in compound case */ + struct pnv_ioda_pe *master; + struct list_head slaves; + /* Link in list of PE#s */ struct list_head dma_link; struct list_head list; @@ -119,6 +125,9 @@ struct pnv_phb { void (*fixup_phb)(struct pci_controller *hose); u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn); void (*shutdown)(struct pnv_phb *phb); + int (*init_m64)(struct pnv_phb *phb); + void (*alloc_m64_pe)(struct pnv_phb *phb); + int (*pick_m64_pe)(struct pnv_phb *phb, struct pci_bus *bus, int all); union { struct { @@ -129,9 +138,20 @@ struct pnv_phb { /* Global bridge info */ unsigned int total_pe; unsigned int reserved_pe; + + /* 32-bit MMIO window */ unsigned int m32_size; unsigned int m32_segsize; unsigned int m32_pci_base; + + /* 64-bit MMIO window */ + unsigned int m64_bar_idx; + unsigned long m64_size; + unsigned long m64_segsize; + unsigned long m64_base; + unsigned long m64_bar_alloc; + + /* IO ports */ unsigned int io_size; unsigned int io_segsize; unsigned int io_pci_base;