From: Christian Lamparter Date: Sun, 16 Dec 2018 09:35:30 +0000 (+0100) Subject: ipq40xx: device-tree overhaul X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2630aae36fc2628647c349fc680c7b595fd73e4f;p=openwrt%2Fstaging%2Faparcar.git ipq40xx: device-tree overhaul - replace licence texts with SPDX-License-Identifier where applicable. - make node-names more generic to fit with Device-Tree Release v0.2 Section 2.2.2 Generic Names Recommendation. - utilize wifi0/1, blsp1_uart1 labels Signed-off-by: Christian Lamparter --- diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts index 4c1e1de24c..ed81cbc9b5 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -63,12 +63,6 @@ status = "okay"; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - crypto@8e3a000 { status = "okay"; }; @@ -180,6 +174,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &cryptobam { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts index 0e49dadcf5..a86e34229e 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts @@ -36,12 +36,6 @@ qcom,wifi_noc_memtype_m0_m2 = ; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - crypto@8e3a000 { status = "okay"; }; @@ -208,6 +202,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &cryptobam { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi index 905f22f856..ceece0f956 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi @@ -51,12 +51,6 @@ qcom,wifi_noc_memtype_m0_m2 = ; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - crypto@8e3a000 { status = "okay"; }; @@ -290,6 +284,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &blsp_dma { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts index 598e22c815..9576e14f25 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts @@ -1,18 +1,4 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qcom-ipq4019.dtsi" #include @@ -67,12 +53,6 @@ status = "okay"; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - usb3@8af8800 { status = "okay"; }; @@ -81,16 +61,6 @@ status = "okay"; }; - wifi@a000000 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; - }; - - wifi@a800000 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; - }; - watchdog@b017000 { status = "okay"; }; @@ -114,7 +84,7 @@ }; }; - gpio-keys { + keys { compatible = "gpio-keys"; wlan { @@ -130,7 +100,7 @@ }; }; - gpio-leds { + switch-leds { compatible = "gpio-leds"; wlan { @@ -207,7 +177,7 @@ status = "okay"; cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - mx25l25635f@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <0>; @@ -290,6 +260,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &usb3_ss_phy { status = "okay"; }; @@ -301,3 +277,13 @@ &usb2_hs_phy { status = "okay"; }; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; +}; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts index 78b38a1411..fd7c66c953 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts @@ -70,12 +70,6 @@ status = "okay"; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - usb3: usb3@8af8800 { status = "okay"; }; @@ -225,6 +219,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &cryptobam { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts index c74fce55fa..08ae27d682 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts @@ -1,18 +1,4 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qcom-ipq4019.dtsi" #include @@ -77,12 +63,6 @@ status = "okay"; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - usb3@8af8800 { status = "okay"; }; @@ -104,7 +84,7 @@ }; }; - gpio-keys { + keys { compatible = "gpio-keys"; wlan { @@ -127,7 +107,7 @@ }; }; - gpio-leds { + leds { compatible = "gpio-leds"; pinctrl-0 = <&led_pins>; pinctrl-names = "default"; @@ -291,6 +271,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &cryptobam { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts index 4d546bf40f..6b90b596d9 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts @@ -1,18 +1,4 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qcom-ipq4019.dtsi" #include @@ -76,12 +62,6 @@ status = "okay"; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - usb3@8af8800 { status = "okay"; }; @@ -206,7 +186,7 @@ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; /* @@ -268,19 +248,25 @@ }; }; - mt29f@1 { + flash@1 { #address-cells = <1>; #size-cells = <0>; compatible = "spinand,mt29f"; reg = <1>; spi-max-frequency = <24000000>; + /* + * U-boot looks for "spinand,mt29f" node, + * if we don't have it, it will spit out the following warning: + * "ipq: fdt fixup unable to find compatible node". + */ + partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; - partition0@0 { + partition@0 { label = "ubi"; reg = <0x00000000 0x08000000>; }; @@ -288,6 +274,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &usb3_ss_phy { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts index 3838f9252e..2809a67693 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts @@ -62,12 +62,6 @@ qcom,wifi_noc_memtype_m0_m2 = ; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - crypto@8e3a000 { status = "okay"; }; @@ -157,6 +151,10 @@ }; }; +&blsp_dma { + status = "okay"; +}; + &blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; @@ -242,7 +240,9 @@ }; }; -&blsp_dma { +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts index 8092e95e4c..24cfc30fdf 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts @@ -63,12 +63,6 @@ status = "okay"; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - crypto@8e3a000 { status = "okay"; }; @@ -190,6 +184,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &cryptobam { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts index 542e9de38b..c7a3084d76 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts @@ -64,12 +64,6 @@ status = "okay"; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - usb3: usb3@8af8800 { status = "okay"; }; @@ -229,6 +223,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &cryptobam { status = "okay"; }; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts index 39616ec2ac..fdfe969245 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts @@ -74,12 +74,6 @@ status = "okay"; }; - serial@78af000 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - usb3@8af8800 { status = "okay"; }; @@ -217,6 +211,12 @@ }; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &tlmm { serial_pins: serial_pinmux { mux { diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts index a91634e62a..5073fe9cb8 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for Meraki MR33 (Stinkbug) * @@ -69,12 +70,6 @@ qcom,wifi_noc_memtype_m0_m2 = ; }; - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - serial@78b0000 { pinctrl-0 = <&serial_1_pins>; pinctrl-names = "default"; @@ -108,7 +103,7 @@ }; }; - gpio-keys { + keys { compatible = "gpio-keys"; reset { @@ -118,7 +113,7 @@ }; }; - gpio-leds { + leds { compatible = "gpio-leds"; power_orange: power { @@ -133,6 +128,12 @@ status = "okay"; }; +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &cryptobam { status = "okay"; }; @@ -160,11 +161,11 @@ pinctrl-names = "default"; status = "okay"; - lp5562@30 { - enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; + led-controller@30 { compatible = "ti,lp5562"; - clock-mode = /bits/8 <2>; reg = <0x30>; + clock-mode = /bits/8 <2>; + enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; /* RGB led */ status_red: chan0 { diff --git a/target/linux/ipq40xx/patches-4.14/084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch b/target/linux/ipq40xx/patches-4.14/084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch new file mode 100644 index 0000000000..513e623ded --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch @@ -0,0 +1,45 @@ +From c696a020193e7f96ead97b6b19a2bcd929b299d3 Mon Sep 17 00:00:00 2001 +From: Sricharan R +Date: Fri, 25 May 2018 11:41:11 +0530 +Subject: [PATCH] ARM: dts: ipq4019: Add a default chosen node + +Add a 'chosen' node to select the serial console. +This is needed when bootloaders do not pass the +'console=' bootargs. + +Acked-by: Bjorn Andersson +Signed-off-by: Sricharan R +Signed-off-by: Andy Gross +--- + arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 8 ++++++++ + arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- + 2 files changed, 9 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +@@ -20,6 +20,14 @@ + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; + compatible = "qcom,ipq4019"; + ++ aliases { ++ serial0 = &blsp1_uart1; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ + soc { + rng@22000 { + status = "ok"; +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -346,7 +346,7 @@ + regulator; + }; + +- serial@78af000 { ++ blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = ; diff --git a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch index 25652bb2c9..349f67c665 100644 --- a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch +++ b/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -15,12 +15,39 @@ +@@ -15,6 +15,7 @@ */ #include "qcom-ipq4019.dtsi" @@ -8,7 +8,8 @@ / { model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1"; - compatible = "qcom,ipq4019"; +@@ -29,6 +30,32 @@ + }; soc { + tcsr@194b000 { @@ -40,7 +41,7 @@ rng@22000 { status = "ok"; }; -@@ -66,14 +93,6 @@ +@@ -74,14 +101,6 @@ pinctrl-names = "default"; status = "ok"; cs-gpios = <&tlmm 54 0>; @@ -55,7 +56,7 @@ }; serial@78af000 { -@@ -102,6 +121,22 @@ +@@ -110,6 +129,22 @@ status = "ok"; };