From: Michael Pratt <mcpratt@pm.me>
Date: Sat, 21 Jan 2023 18:45:26 +0000 (-0500)
Subject: ath79: split Engenius EPG5000 DTS to common DTSI
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2742705fa531cdccadafe2a9088bb3b33e568f97;p=openwrt%2Fstaging%2Fjow.git

ath79: split Engenius EPG5000 DTS to common DTSI

Split the DTS to be used with similar boards made by Senao,
dual-band routers with Atheros / Qualcomm ethernet switch.

Set initvals for the switch in each device's DTS.
Set some common calibration nvmem-cells in DTSI.

While at it, fix MTD partition node names.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
---

diff --git a/target/linux/ath79/dts/qca9558_engenius_epg5000.dts b/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
index 35716152ad..37ad32f330 100644
--- a/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
+++ b/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
@@ -1,9 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca955x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca955x_senao_router-dual.dtsi"
 
 / {
 	model = "EnGenius EPG5000";
@@ -47,110 +44,13 @@
 			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-
-		wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-			debounce-interval = <60>;
-		};
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	phy-handle = <&phy0>;
-	pll-data = <0xa6000000 0x00000101 0x00001616>;
-};
-
-&mdio0 {
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-
-		qca,ar8327-initvals = <
-			0x04 0x87600000 /* PORT0 PAD MODE CTRL */
-			0x7c 0x0000007e /* PORT0_STATUS */
-			>;
-	};
-};
-
-&pcie0 {
-	status = "okay";
-
-	wifi@0,0 {
-		compatible = "pci168c,003c";
-		reg = <0x0000 0 0 0 0>;
-	};
 };
 
-&spi {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <25000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x000000 0x030000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x030000 0x010000>;
-			};
-
-			partition@40000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x040000 0xe50000>;
-			};
-
-			partition@790000 {
-				label = "manufacture";
-				reg = <0xe90000 0x100000>;
-				read-only;
-			};
-
-			partition@ed0000 {
-				label = "backup";
-				reg = <0xf90000 0x010000>;
-				read-only;
-			};
-
-			partition@fe0000 {
-				label = "storage";
-				reg = <0xfa0000 0x050000>;
-				read-only;
-			};
-
-			partition@ff0000 {
-				label = "art";
-				reg = <0xff0000 0x010000>;
-				read-only;
-			};
-		};
-	};
+&phy0 {
+	qca,ar8327-initvals = <
+		0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+		0x7c 0x0000007e /* PORT0_STATUS */
+	>;
 };
 
 &usb_phy1 {
@@ -162,7 +62,5 @@
 };
 
 &wmac {
-	status = "okay";
-
 	qca,no-eeprom;
 };
diff --git a/target/linux/ath79/dts/qca955x_senao_router-dual.dtsi b/target/linux/ath79/dts/qca955x_senao_router-dual.dtsi
new file mode 100644
index 0000000000..20bea91e8d
--- /dev/null
+++ b/target/linux/ath79/dts/qca955x_senao_router-dual.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&phy0>;
+	pll-data = <0xa6000000 0x00000101 0x00001616>;
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+
+	ath10k_0: wifi@0,0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0x0000 0 0 0 0>;
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x000000 0x030000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x030000 0x010000>;
+				read-only;
+			};
+
+			partition@40000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x040000 0xe50000>;
+			};
+
+			partition@e90000 {
+				label = "manufacture";
+				reg = <0xe90000 0x100000>;
+				read-only;
+			};
+
+			partition@f90000 {
+				label = "backup";
+				reg = <0xf90000 0x010000>;
+				read-only;
+			};
+
+			partition@fa0000 {
+				label = "storage";
+				reg = <0xfa0000 0x050000>;
+				read-only;
+			};
+
+			art: partition@ff0000 {
+				label = "art";
+				reg = <0xff0000 0x010000>;
+				read-only;
+
+				compatible = "nvmem-cells";
+
+				calibration_art_1000: calibration@1000 {
+					reg = <0x1000 0x440>;
+				};
+
+				calibration_art_5000: calibration@5000 {
+					reg = <0x5000 0x844>;
+				};
+			};
+		};
+	};
+};
+
+&wmac {
+	status = "okay";
+};