From: Noa Osherovich Date: Sat, 4 Jun 2016 12:15:29 +0000 (+0300) Subject: IB/mlx5: Return PORT_ERR in Active to Initializing tranisition X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=2788cf3bd90af3791c3195c52391bcf34fa67b40;p=openwrt%2Fstaging%2Fblogic.git IB/mlx5: Return PORT_ERR in Active to Initializing tranisition FW port-change events are fired on Active <-> non Active port state transitions only. When the port state changes from Active to Initializing (Active -> Down -> Initializing), a single event is fired. The HCA transitions from Down to Initializing unless prevented from doing so, hence the driver should also propagate events when the port state is Initializing to consumers so they'll be aware that the port is no longer Active and act accordingly. Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB...') Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 83047ef1394c..94a8f914b237 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -1869,14 +1869,11 @@ static void mlx5_ib_event(struct mlx5_core_dev *dev, void *context, break; case MLX5_DEV_EVENT_PORT_DOWN: + case MLX5_DEV_EVENT_PORT_INITIALIZED: ibev.event = IB_EVENT_PORT_ERR; port = (u8)param; break; - case MLX5_DEV_EVENT_PORT_INITIALIZED: - /* not used by ULPs */ - return; - case MLX5_DEV_EVENT_LID_CHANGE: ibev.event = IB_EVENT_LID_CHANGE; port = (u8)param;