From: Mathew McBride <matt@traverse.com.au>
Date: Fri, 23 Jun 2023 05:46:41 +0000 (+0000)
Subject: armsr: armv8: add Broadcom GENET and MDIO modules
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=27ca83c6270a4cc6922cdae82bb5c01e4e2d1d22;p=openwrt%2Fstaging%2Frobimarko.git

armsr: armv8: add Broadcom GENET and MDIO modules

These are used by common Broadcom SoC's like
the BCM2711 (RPi4) and iProc network processor.

Tested on the RPi4B using the Raspberry Pi
UEFI+ACPI firmware[1].

Signed-off-by: Mathew McBride <matt@traverse.com.au>

[1] - https://github.com/pftf/RPi4
---

diff --git a/target/linux/armsr/modules.mk b/target/linux/armsr/modules.mk
index 2bd5748e90..f570c613cf 100644
--- a/target/linux/armsr/modules.mk
+++ b/target/linux/armsr/modules.mk
@@ -13,6 +13,28 @@ endef
 
 $(eval $(call KernelPackage,acpi-mdio))
 
+define KernelPackage/bcmgenet
+  SUBMENU=$(NETWORK_DEVICES_MENU)
+  DEPENDS:=@(TARGET_armsr_armv8) +kmod-mdio-bcm-unimac
+  TITLE:=Broadcom GENET internal MAC (Raspberry Pi 4)
+  KCONFIG:=CONFIG_BCMGENET
+  FILES=$(LINUX_DIR)/drivers/net/ethernet/broadcom/genet/genet.ko
+  AUTOLOAD=$(call AutoLoad,30,genet)
+endef
+
+$(eval $(call KernelPackage,bcmgenet))
+
+define KernelPackage/mdio-bcm-unimac
+  SUBMENU=$(NETWORK_DEVICES_MENU)
+  DEPENDS:=@(TARGET_armsr_armv8) +kmod-of-mdio
+  TITLE:=Broadcom UniMAC MDIO bus controller
+  KCONFIG:=CONFIG_MDIO_BCM_UNIMAC
+  FILES=$(LINUX_DIR)/drivers/net/mdio/mdio-bcm-unimac.ko
+  AUTOLOAD=$(call AutoLoad,30,mdio-bcm-unimac)
+endef
+
+$(eval $(call KernelPackage,mdio-bcm-unimac))
+
 define KernelPackage/fsl-pcs-lynx
   SUBMENU=$(NETWORK_DEVICES_MENU)
   DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-phylink