From: Thomas Lim Date: Wed, 10 Apr 2019 21:06:07 +0000 (-0400) Subject: drm/amd/display: Add power down display on boot flag X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=27eaa4927dc3be669ed70670241597ac73595caf;p=openwrt%2Fstaging%2Fblogic.git drm/amd/display: Add power down display on boot flag [Why] Due to the generic introduction of seamless boot, the display is no longer blanked upon boot. However, this causes corruption on some systems that does not lock the memory in the non-secure boot case, resulting in brief corruption on boot due to garbage being written into the frame buffer. [How] Add a flag, read during DC init, to determine whether display should be blanked on boot. Default to true. Signed-off-by: Thomas Lim Reviewed-by: Aric Cyr Acked-by: Anthony Koo Acked-by: Leo Li Signed-off-by: Alex Deucher --- diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 4e7af5594459..a7e6f45a375c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -534,6 +534,8 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) if (amdgpu_dc_feature_mask & DC_FBC_MASK) init_data.flags.fbc_support = true; + init_data.flags.power_down_display_on_boot = true; + /* Display Core create. */ adev->dm.dc = dc_create(&init_data); diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index aa2954dda129..70edd9ea5afe 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -204,6 +204,7 @@ struct dc_config { bool optimize_edp_link_rate; bool disable_fractional_pwm; bool allow_seamless_boot_optimization; + bool power_down_display_on_boot; }; enum visual_confirm { diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index 549836c60220..7e173c74907c 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -1118,7 +1118,7 @@ static void dcn10_init_hw(struct dc *dc) * Otherwise, if taking control is not possible, we need to power * everything down. */ - if (dcb->funcs->is_accelerated_mode(dcb)) { + if (dcb->funcs->is_accelerated_mode(dcb) || dc->config.power_down_display_on_boot) { for (i = 0; i < dc->res_pool->pipe_count; i++) { struct hubp *hubp = dc->res_pool->hubps[i]; struct dpp *dpp = dc->res_pool->dpps[i];