From: Bjorn Helgaas Date: Thu, 23 Jun 2005 07:10:16 +0000 (-0700) Subject: [PATCH] PCDP: handle tables that don't supply baud rate X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=280dedb8d64ccfe1166ae03d3b254fc3b65de6a5;p=openwrt%2Fstaging%2Fblogic.git [PATCH] PCDP: handle tables that don't supply baud rate The HCDP specs (i.e., PCDP revision < 3) allow zero as a default value for baud rate and data bits. So if firmware doesn't supply them, let early_serial_console_init() probe for them rather than telling it the baud rate is zero. Also, update the URL for the PCDP spec. Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c index df1b721154d2..839b44a7e08b 100644 --- a/drivers/firmware/pcdp.c +++ b/drivers/firmware/pcdp.c @@ -23,12 +23,15 @@ setup_serial_console(struct pcdp_uart *uart) { #ifdef CONFIG_SERIAL_8250_CONSOLE int mmio; - static char options[64]; + static char options[64], *p = options; mmio = (uart->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY); - snprintf(options, sizeof(options), "console=uart,%s,0x%lx,%lun%d", - mmio ? "mmio" : "io", uart->addr.address, uart->baud, - uart->bits ? uart->bits : 8); + p += sprintf(p, "console=uart,%s,0x%lx", + mmio ? "mmio" : "io", uart->addr.address); + if (uart->baud) + p += sprintf(p, ",%lu", uart->baud); + if (uart->bits) + p += sprintf(p, "n%d", uart->bits); return early_serial_console_init(options); #else diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h index 863bb6f768c3..1dc7c88b7b4d 100644 --- a/drivers/firmware/pcdp.h +++ b/drivers/firmware/pcdp.h @@ -2,7 +2,7 @@ * Definitions for PCDP-defined console devices * * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf - * v2.0: http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf + * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf * * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P. * Khalid Aziz