From: Hans de Goede <hdegoede@redhat.com>
Date: Fri, 12 Oct 2018 10:12:29 +0000 (+0200)
Subject: pwm: lpss: Add get_state callback
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=280fec4c3ad6701567d7d840506b9b1463a48b71;p=openwrt%2Fstaging%2Fblogic.git

pwm: lpss: Add get_state callback

Add a get_state callback so that the initial state correctly reflects
the actual hardware state.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
---

diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index 723ca9de8325..ea93ef9f3672 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -159,8 +159,42 @@ static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
+/* This function gets called once from pwmchip_add to get the initial state */
+static void pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			       struct pwm_state *state)
+{
+	struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+	unsigned long base_unit_range;
+	unsigned long long base_unit, freq, on_time_div;
+	u32 ctrl;
+
+	base_unit_range = BIT(lpwm->info->base_unit_bits);
+
+	ctrl = pwm_lpss_read(pwm);
+	on_time_div = 255 - (ctrl & PWM_ON_TIME_DIV_MASK);
+	base_unit = (ctrl >> PWM_BASE_UNIT_SHIFT) & (base_unit_range - 1);
+
+	freq = base_unit * lpwm->info->clk_rate;
+	do_div(freq, base_unit_range);
+	if (freq == 0)
+		state->period = NSEC_PER_SEC;
+	else
+		state->period = NSEC_PER_SEC / (unsigned long)freq;
+
+	on_time_div *= state->period;
+	do_div(on_time_div, 255);
+	state->duty_cycle = on_time_div;
+
+	state->polarity = PWM_POLARITY_NORMAL;
+	state->enabled = !!(ctrl & PWM_ENABLE);
+
+	if (state->enabled)
+		pm_runtime_get(chip->dev);
+}
+
 static const struct pwm_ops pwm_lpss_ops = {
 	.apply = pwm_lpss_apply,
+	.get_state = pwm_lpss_get_state,
 	.owner = THIS_MODULE,
 };