From: Christoph Muellner Date: Fri, 22 Mar 2019 11:38:04 +0000 (+0100) Subject: dt-bindings: mmc: Add disable-cqe-dcmd property. X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=28f22fb755ecf9f933f045bc0afdb8140641b01c;p=openwrt%2Fstaging%2Fblogic.git dt-bindings: mmc: Add disable-cqe-dcmd property. Add disable-cqe-dcmd as optional property for MMC hosts. This property allows to disable or not enable the direct command features of the command queue engine. Signed-off-by: Christoph Muellner Signed-off-by: Philipp Tomsich Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index cdbcfd3a4ff2..c269dbe384fe 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -64,6 +64,8 @@ Optional properties: whether pwrseq-simple is used. Default to 10ms if no available. - supports-cqe : The presence of this property indicates that the corresponding MMC host controller supports HW command queue feature. +- disable-cqe-dcmd: This property indicates that the MMC controller's command + queue engine (CQE) does not support direct commands (DCMDs). *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted"