From: Daniel Golle Date: Tue, 5 Jan 2021 12:55:34 +0000 (+0000) Subject: ipq806x: some corrections for TP-Link Talon AD7200 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=28fd279e5d39d60efb8bcc3bbed5ab87b9e2feab;p=openwrt%2Fstaging%2Fzorun.git ipq806x: some corrections for TP-Link Talon AD7200 Address most comments made by Adrian Schmutzler on the mailing list. The device name is kept as 'TP-Link Talon AD7200' as that seems to be the marketing name TP-Link chose for that device, it also matches the naming scheme for other TP-Link devices (e.g. 'TP-Link Archer C7'). Fixes: 1a775a4fd0 ("ipq806x: add support for TP-Link Talon AD7200") Signed-off-by: Daniel Golle --- diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts index e5bdc32114..48dc116e99 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts @@ -46,7 +46,7 @@ }; ledgeneral { - label = "ledswitch"; + label = "led-enable"; gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; linux,code = ; }; @@ -63,18 +63,23 @@ }; usb1 { - label = "blue:usb_1"; + label = "blue:usb1"; gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; }; + wlan5g { + label = "blue:wlan5g"; + gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; + }; + usb3 { - label = "blue:usb_3"; + label = "blue:usb3"; gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; }; - wps { - label = "blue:wps"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; + wlan2g { + label = "blue:wlan2g"; + gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; }; wan_orange { @@ -87,27 +92,20 @@ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; }; - power: status { - label = "blue:status"; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "blue:wlan2g"; - gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; - - }; - - wlan5g { - label = "blue:wlan5g"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - + wps { + label = "blue:wps"; + gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; }; wlan60g { label = "blue:wlan60g"; gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; }; + + power: status { + label = "blue:status"; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; + }; }; }; @@ -196,155 +194,155 @@ spi-max-frequency = <50000000>; reg = <0>; - SBL1@0 { + partition@0 { label = "SBL1"; reg = <0x0 0x20000>; read-only; }; - MIBIB@20000 { + partition@20000 { label = "MIBIB"; reg = <0x20000 0x20000>; read-only; }; - SBL2@40000 { + partition@40000 { label = "SBL2"; reg = <0x40000 0x20000>; read-only; }; - SBL3@60000 { + partition@60000 { label = "SBL3"; reg = <0x60000 0x30000>; read-only; }; - DDRCONFIG@90000 { + partition@90000 { label = "DDRCONFIG"; reg = <0x90000 0x10000>; read-only; }; - SSD@a0000 { + partition@a0000 { label = "SSD"; reg = <0xa0000 0x10000>; read-only; }; - TZ@b0000 { + partition@b0000 { label = "TZ"; reg = <0xb0000 0x30000>; read-only; }; - RPM@e0000 { + partition@e0000 { label = "RPM"; reg = <0xe0000 0x20000>; read-only; }; - fs-uboot@100000 { + partition@100000 { label = "fs-uboot"; reg = <0x100000 0x70000>; read-only; }; - uboot-env@170000 { + partition@170000 { label = "uboot-env"; reg = <0x170000 0x40000>; read-only; }; - radio@1b0000 { + partition@1b0000 { label = "radio"; reg = <0x1b0000 0x40000>; read-only; }; - os-image@1f0000 { + partition@1f0000 { label = "os-image"; reg = <0x1f0000 0x400000>; }; - rootfs@5f0000 { + partition@5f0000 { label = "rootfs"; reg = <0x5f0000 0x1900000>; }; - defaultmac: default-mac@1ef0000 { + defaultmac: partition@1ef0000 { label = "default-mac"; reg = <0x1ef0000 0x00200>; read-only; }; - pin@1ef0200 { + partition@1ef0200 { label = "pin"; reg = <0x1ef0200 0x00200>; read-only; }; - device-id@1ef0400 { + partition@1ef0400 { label = "device-id"; reg = <0x1ef0400 0x00200>; read-only; }; - product-info@1ef0600 { + partition@1ef0600 { label = "product-info"; reg = <0x1ef0600 0x0fa00>; read-only; }; - partition-table@1f00000 { + partition@1f00000 { label = "partition-table"; reg = <0x1f00000 0x10000>; read-only; }; - soft-version@1f10000 { + partition@1f10000 { label = "soft-version"; reg = <0x1f10000 0x10000>; read-only; }; - support-list@1f20000 { + partition@1f20000 { label = "support-list"; reg = <0x1f20000 0x10000>; read-only; }; - profile@1f30000 { + partition@1f30000 { label = "profile"; reg = <0x1f30000 0x10000>; read-only; }; - default-config@1f40000 { + partition@1f40000 { label = "default-config"; reg = <0x1f40000 0x10000>; read-only; }; - user-config@1f50000 { + partition@1f50000 { label = "user-config"; reg = <0x1f50000 0x40000>; read-only; }; - qos-db@1f90000 { + partition@1f90000 { label = "qos-db"; reg = <0x1f90000 0x40000>; read-only; }; - usb-config@1fd0000 { + partition@1fd0000 { label = "usb-config"; reg = <0x1fd0000 0x10000>; read-only; }; - log@1fe0000 { + partition@1fe0000 { label = "log"; reg = <0x1fe0000 0x20000>; read-only; diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index 876f337bba..b006757478 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -342,7 +342,6 @@ define Device/tplink_ad7200 BLOCKSIZE := 128k PAGESIZE := 2048 BOARD_NAME := ad7200 - SUPPORTED_DEVICES += ad7200 TPLINK_BOARD_ID := AD7200 DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-wil6210 endef